IN5104 User s Guide Addendum

Transcription

1 IN5104 User s Guide Addendum Regulatory model W55 Mode d emploi du projecteur IN5104 Addenda IN5104 Benutzeranleitung Nachtrag Apéndice del Manual de uso IN5104 Supplemento alla guida all'uso del modello IN5104 IN5104 Addendum Gebruikershandleiding Adendo ao Guia do Usuário IN5104 IN5104 Användarmanual, Tillägg Дополнение к руководству пользователя IN5104 IN5104 사용설명서부록 IN5104 用户指南附录 QR * *

2 IN5104 User s Guide Addendum Contents Introduction... 1 Custom Key Menu Additions... 2 Closed Captions :10 Aspect Ratio Support... 2 Split Screen... 3 Monitor Out Control... 5 Ruled Lines Display... 6 Computer 1 (HDMI) Connector Location Change... 6 RS 232 Command Additions... 7 APPENDIX IN5104 Projected Image Sizes for Standard and Optional Lenses Introduction Except for the new features and changes described in this addendum, the IN5104 is the same as the IN5106. Please refer to the IN5106 User s Guide, and warranty and safety booklets for complete operating instructions. 1

3 Custom Key Menu Additions Ruled Lines and Split Screen items have been added to the Main Menu > Settings > Custom Key menu. See later sections in this document for more information about these functions. Closed Captions Closed captions can be shown when the source is analog component (480i only), or s video or composite (NTSC only). The video signal must also include caption information. To control this feature, use the Main Menu > Picture > Closed Captions menu: Auto: Display captions when sound is muted. On: Always display captions. Off: Never display captions. Channel: Selects which captions to display (CC1 and CC2 are the most commonly used). 16:10 Aspect Ratio Support The 16:10 aspect ratio has been added to the Main Menu > Picture > Aspect Ratio menu. 2

4 Split Screen Split screen lets you show two different sources at the same time, one on the left half of the screen and the other on the right. The following source combinations are supported: Computer 1 Computer 2 Computer 3 Video 1 Video 2 Video 3 Computer 1 Computer 2 Computer 3 Video 1 Video 2 Video 3 To control this feature, use the Main Menu > Picture > Split Screen Menu (some menu items below are only shown when split screen is on): Exit or Previous: Removes the Split Screen Menu (if split screen is on) or goes to the Picture menu (if split screen is off). Split Screen: Check the box to turn on split screen, or un check it to turn off split screen. Main on Left/Right: Selects which side is the main (primary) side. Characteristics of the main side: o o o Source buttons, as well as Aspect Ratio and Auto Image buttons, affect the main side only (unsupported source combinations are prevented see above table). Only sound from the main side is audible. When split screen is turned off, the main side is displayed full screen. Swap Left and Right: Switches the left and right sources. Left/Right Settings: Adjusts aspect ratio, phase, tracking, and horizontal/vertical position for the left or right side. 3

5 Left/Right Source: Selects the source to display on the left or right side (some items will be disabled to prevent unsupported source combinations see above table). Source Info: Shows source information for the left and right sides. Main Menu: Turns off split screen and goes to the Main Menu. To program your remote s Custom button to display the above Split Screen Menu: Go to the Main Menu > Settings > Custom Key menu and select Split Screen. IMPORTANT - When split screen is on, some projector functions work differently: The Main Menu and its sub menus are not available pressing the Menu button shows the Split Screen Menu instead. To turn off split screen and access other menus from the Split Screen Menu: select Main Menu, or un check Split Screen then select Previous. Autosource (source search), Closed Captions and Magnify are not available. Most picture settings can t be adjusted (e.g. Brightness, Contrast, Keystone, Overscan, Presets, etc.). To change these settings: 1. Make sure the source you want to adjust is the main source (See above for a description of the main source. If needed, go to the Split Screen Menu and select Swap Left and Right or Main on Left/Right). 2. Turn off split screen (go to the Split Screen Menu, then select Main Menu, or un check Split Screen then select Previous). 3. Change picture settings. 4. Turn on split screen (go to the Split Screen Menu, then check Split Screen). Some RS 232 commands have no effect. See the end of the RS-232 Command Additions section later in this document. 4

6 Monitor Out Control The Monitor Out connector outputs either the Computer 2 or Computer 3 source. The source that is output is determined by the current source and the Monitor Out Default setting, as shown below: Current Source Monitor Out Default setting Computer 2 Computer 3 Off Computer 1 Output Computer 2 Output Computer 3 No output Computer 2 Output Computer 2 Output Computer 2 Output Computer 2 Computer 3 Output Computer 3 Output Computer 3 Output Computer 3 Video 1 Output Computer 2 Output Computer 3 No output Video 2 Output Computer 2 Output Computer 3 No output Video 3 Output Computer 2 Output Computer 3 No output To change the above Monitor Out Default setting, use the Main Menu > Settings > Monitor Out Default menu: Computer 2: Output Computer 2 unless current source is Computer 3 (in that case output Computer 3 instead). Computer 3: Output Computer 3 unless current source is Computer 2 (in that case output Computer 2 instead). Off: Output the current source if it is Computer 2 or Computer 3. Otherwise do not output any signal. 5

7 Ruled Lines Display This feature displays line patterns that are useful when projecting onto a writeable surface, or when installing and setting up the projector. To program your remote s Custom button to show and hide ruled lines, go to the Main Menu > Settings > Custom Key menu and select Ruled Lines. To change the style of ruled lines that are shown, go to the Main Menu > Settings > Ruled Lines menu: Lines on White: Horizontal lines on a white background. Lines on Black: Horizontal lines on a black background. Grid on White: Grid on a white background. Grid on Black: Grid on a black background. Computer 1 (HDMI) Connector Location Change The location of the Computer 1 (HDMI) connector has been changed to be near the upper left corner of the back panel: 6

8 RS-232 Command Additions The IN5104 supports the same RS 232 commands as the IN5106, plus the additions in the table below. For complete RS 232 command reference, see the IN5106 User s Guide. Function Command Minimum Maximum Default Step Aspect Ratio ARZ at RW : Native 1: 16:9 2: 4:3 6: 16:10 Aspect Ratio (split ARL at RW screen left) Same values as above Aspect Ratio (split ARR at RW screen right) Same values as above Closed Captions CCD at RW : Off 1: On 2: Auto Closed Captions CCC at RW Channel 0: CC1 1: CC2 2: CC3 3: CC4 4: Text1 5: Text2 6: Text3 7: Text4 Custom Key EFK at RW

9 Function Command Minimum Maximum Default Step 0: Blank 1: Mute 2: Aspect Ratio 3: Source 4: Auto Image 5: Freeze 6: Magnify 7: Source Info 8: Service Info 15: AV Mute 17: Split Screen 18: Ruled Lines Freeze 0: Off FRZ at RW : On Horizontal Position (split screen left) Horizontal Position (split screen right) Monitor Out Default 1: Computer 2 2: Computer 3 5: Off HPL at RW Computer VGA: 13 Computer SVGA: 84 Computer XGA: 162 Computer SXGA, WXGA: 226 Computer WXGA+: 360 Component 480p: 0 Component 720p: 170 Component 1080i: 102 HDMI, Component 480i, Composite, S-Video: N/A 8 Computer VGA: 269 Computer SVGA: 340 Computer XGA: 418 Computer SXGA, WXGA: 482 Computer WXGA+: 616 Component 480p: 240 Component 720p: 426 Component 1080i: 358 HDMI, Component 480i, Composite, S-Video: N/A Computer VGA: 141 Computer SVGA: 212 Computer XGA: 290 Computer SXGA, WXGA: 354 Computer WXGA+: 488 Component 480p: 120 Component 720p: 298 Component 1080i: 230 HDMI, Component 480i, Composite, S-Video: N/A HPR at RW Same as above Same as above Same as above 1 MOD at RW

10 Function Command Minimum Maximum Default Step Phase (split screen left) MSL at RW Phase (split screen right) MSR at RW Split Screen SSC at RW : Off 1: On Ruled Lines Enable RLE at RW : Off 1: On Ruled Lines RLL at RW : Lines on White 1: Lines on Black 2: Grid on White 3: Grid on Black Split Screen Main Side SSM at RW : Left 1: Right Split Screen Left Source SSL at RW : Computer 1 1: Computer 2 2: Computer 3 3: Video 1 4: Video 2 5: Video 3 Split Screen Right Source SSR at RW Same values as above Split Screen Swap SSS at W 0 1 N/A 1: Perform swap Tracking (split screen MTL at RW left) Tracking (split screen right) MTR at RW

11 Function Command Minimum Maximum Default Step Vertical Position (split VPL at RW 1 screen left) Vertical Position (split screen right) Computer (all modes), Component (480p, 720p, 1080i), Composite, S-Video: 0 HDMI, Component 480i: N/A Computer VGA: 163 Computer SVGA: 155 Computer XGA: 163 Computer SXGA and up: 169 Component 480p: 72 Component 720p: 50 Component 1080i: 84 Composite, S-Video: 169 HDMI, Component 480i: N/A Computer VGA: 35 Computer SVGA: 27 Computer XGA: 35 Computer SXGA and up: 41 Component 480p: 36 Component 720p: 25 Component 1080i: 42 Composite, S-Video: 41 HDMI, Component 480i: N/A VPR at RW Same as above Same as above Same as above 1 IMPORTANT The following RS-232 commands have no effect when split screen is on Active Iris IRI Factory Reset RST Network Restart NTR Audio for Source 3 SA3 Auto Power APO Green Gain GCG Overscan OVS Audio for Source 4 SA4 Auto Source ASC Horz Keystone DKH Power Save PSV Audio for Source 5 SA5 Blank Screen BSC HDMI Noise Cancel HNC Power-Up Source DSC Monitor Out Default MOD Blue Gain BCG Internal Sound Enable INT Presets PST Sync On Green SOG Brightness BRT IR Receiver Front IRF Rear REA Source1 SR1 Closed Captions Channel CCC IR Receiver Rear IRR Red Gain RCG Source2 SR2 Closed Captions CCD IR Receiver Top IRT Save User Preset 1 US1 Source3 SR3 Ceiling CEL Language LAN Save User Preset 2 US2 Source4 SR4 Color CLR Low Power LPE Save User Preset 3 US3 Startup Logo DSU Color Space CSM Magnify MAG Screen Save SSV Tint TNT Color Temperature TMP Magnify Enable MGE Sharpness SHP Ruled Lines RLL Contrast CON Magnify Horz Position MPH Audio for Source 0 SA0 Vertical Keystone DKC Custom Key EFK Magnify Vert Position MPV Audio for Source 1 SA1 Video Standard VSU Display Messages DMG PC Screen Saver Off NND Audio for Source 2 SA2 10

12 APPENDIX IN5104 Projected Image Sizes for Standard and Optional Lenses Visit for an interactive image size calculator. You can order optional lenses from (in select areas), your retailer or your dealer. WARNING: Before replacing the lens, turn off the projector and disconnect the power cord. Loosen the screws marked with a triangle to remove the lens. Standard lens projection sizes ( :1 throw ratio) Distance (feet / m) Minimum Size Diagonal Image Image Width (feet / m) (feet / m) Diagonal Image (feet / m) Maximum Size Image Width (feet / m) Minimum Distance 3 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 5.1 Maximum Distance 30 / / / / /

13 Short Fixed lens projection sizes (0.8:1 throw ratio) Screen Size Projection Distance Minimum 40 / 1 27 / / / / / / / / 3 81 / / / / / / / / / / / 6.0 Short Zoom lens projection sizes ( :1 throw ratio range) Screen Size Projection Distance Minimum Maximum 40 / 1 40 / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

14 Long Throw lens projection sizes ( :1 throw ratio range) Screen Size Projection Distance Minimum Maximum 40 / 1 64 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 42.0 Ultra Long Throw lens projection sizes ( :1 throw ratio range) Screen Size Projection Distance Minimum Maximum 40 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /