Continuous High-Flex Cable for Automated Systems
|
|
- Colleen Manning
- 6 years ago
- Views:
Transcription
1 Take advantage of the proven,10 million flex cycle capabilities of any of flexlife-10 cable designs and eliminate the risk of plant downtime due to cable failure. Continuous High-Flex Cable for Automated Systems Shorten installation time with Quick Disconnect options Reduce equipment and plant downtime Provide higher reliability with longer cable life Lower maintenance and operating costs
2 Continuous Flex Cable High Performance Wiring Solution for Automated Systems The selection of high performance cable for automated equipment, often an afterthought in system design, is an effective solution that can reduce costly plant downtime due to cable failure. As a manufacturer of connectivity and sensing solutions, TURCK takes plant downtime seriously. At TURCK, we create specific cable and wiring designs for automated robotic, material handing, and assembly systems used for product manufacturing and processing applications in the automotive, food/beverage, biotechnology, and semiconductor industries. These plants can experience downtime costs from hundreds to thousands of dollars per minute and depend on the reliability of TURCK connectivity and sensing products to keep their automated systems running. flexlife-10 Just released and already specified! Specified by a major automotive manufacturer for all robotic applications! We Build "Flex" into Every Cable We Design Our standard PVC and PUR control cables are designed to meet a minimum of 2 million flex cycles. These control cables are still in use years and 7 to 8 million flex cycles later. flexlife-10, our latest innovation in high flex cable design guarantees increased performance to 10 million cycles of continuous flexing, bending, and twisting motion found in C-track, robotic and other motion systems. Your Choice: flexlife-10 Spooled Cable or Molded Cordsets Selecting the best cable design can be confusing and costly. Some cable manufacturers assign a different cable to each axis of motion, which may not accurately reflect your application needs. flexlife-10 cable provides the same superior performance for all types of motion. Choosing flexlife-10 takes the risk out of specifying for motion applications. minifast 7/8-16 UN thread connector, 2 to 6-pins for AC and DC systems up to 600 V. multifast M23 thread, 12 and 19-pins for AC and DC systems, wire consolidation and multi-pin devices. eurofast 12 mm connector in 3, 4, 5, 6 & 8-pin DC for systems up to 250 V standard to extra heavy duty designs. microfast 1/2-20 UNF connector in 3 to 5-pin for AC systems up to 250 V. picofast Spooled Cable 8 mm connector in 3 & 4-pin for DC systems, snaplock or threaded metal coupling nut.
3 Design flexlife-10, A Design So Revolutionary It Outperforms All Other Robotic Cable! The superior performance of flexlife-10 is due to a unique, low-stress cable construction using custom compounded TPE and PUR. The flexlife-10 design generates less heat while flexing, which prevents deformation and stress to the cable. As a cost savings measure, other robotic cables often contain high amounts of fillers and less of the high cost base polymer. This compromises the flexing properties of the cable, lowering performance and product life. TPE or PUR jacket Continuous Flex Solutions for Every Industry PTFE flex facilitator Polyester elastomer Alloy conductors The flexlife-10 design includes finely stranded, custom alloy conductors and proprietary blended thermoplastic insulation and cable jacket compounds. A flex facilitator made of Teflon is wrapped around the conductors preventing heat build-up due to friction between the cable jacket and conductors during the flex cycle. From machine tools and automotive assembly to medical devices and semiconductor manufacturing, TURCK's flexlife-10 continuous flex cable offers a wide range of standard and custom connectivity solutions. Industry Exclusive - 10,000,000 Cycle Warranty To avoid costly downtime of your manufacturing operations, you need reliable cables and connectors. That is why TURCK has spent over 5 years developing flexlife-10 cables and why we can offer a 10,000,000 cycle warranty. If your cordset product made with flexlife-10 cable fails before 10,000,000 cycles, we will replace it. The warranty becomes effective when you complete the 10,000,000 Cycle Warranty Registration and return it to TURCK. A TURCK authorized representative will visit your site to make any recommendations necessary on the proper installation of your cordset product. Contact TURCK at TURCK for the full details of the warranty.
4 Motion Applications flexlife-10 Cable Specification Guidelines for Motion Systems Automation systems have special cable design requirements. When making a cable selection it is essential to consider the operating environment, the type of motion and any special mechanical requirements of the system. Understanding the environmental factors of the application will help determine cable insulation materials, bend radius and other essential cable characteristics. Environmental Operating Conditions Automation systems operate under a variety of environmental conditions that require cable insulation to be resistant to extremes in temperature, chemicals, and abrasion. Typical Flexing Motions TURCK Thermoplastic Elastomer (TPE) is a specially blended polymer of high molecular weight that provides the flexibility of PVC with the wear and chemical resistance of rubber. Excellent for use in most automated applications. TURCK Polyurethane (PUR) provides the highest abrasion resistance and is impervious to hydraulic fluids and hydrocarbons. Recommended for use in automotive manufacturing applications. Bend Flexing The cable flexes back and forth with one end of the cable in a stationary position. This type of motion is often the result of installation around fixed objects in addition to the applications listed below. All flexlife-10 Cables Provide: Excellent oil resistance Cold temperature flexibility to -40 C (-40 F) Flame retardant designs - CSA FT-1 Meets UL and CSA approvals Special Mechanical Requirements Mechanical considerations for applying the proper bend radius, termination and strain relief need to be observed from system design through installation and first flex cycle. The best method of termination and stress relief for flex cable is molded connectors. Cordsets with molded connecters provide dependable termination and built-in strain relief. Specifying cable with molded connecters now will provide added value later by reducing installation time, preventing miss-wiring and making system changes and maintenance a more efficient process. Continuous Flex The cable is rolling or flexing back and forth in a linear motion. C-track is a typical continuous flex application. Torsional Flex (longitudinal twisting) The cable is twisting and flexing continuously in a clockwise-counterclockwise fashion. Angles can range from 90 to 360. Torsional flexing is typically found in robotic applications.
5 Instruction Guide Proper installation techniques will maximize the full service life of continuous flex cable. Good installation practices include adhering to local codes and following the installation recommendations of cable, conduit, cable tray and flexible carrier manufacturers. Due to high quality construction, flexlife-10 can be directly installed into C-tracks and other applications without prior steps to un-stress the cable. Many cable manufacturers recommend suspending or laying out cable prior to installation for a minimum of 24 hours. With flexlife-10, you can skip this step and shorten the installation time. By installing cable with connectors, you can be up and running even faster. Whether you use cordsets or spooled cable, the following installation guidelines should be observed. Installing Spooled Cable Unwind cable from the outer layer of the spool without twisting or creating loops. Do not pull directly from a fixed reel. Bend Radius and Free Movement of Cable The recommended bend radius for flexlife-10 is 10 x cable diameter. The cable must be able to move freely along the bend radius when installed in C-tracks, and other motion applications. Check for adequate freedom of movement through several test flex cycles to verify proper installation. Cables of various diameters installed in cable carriers need a minimum space allowance of 10% of the cable diameter and even weight distribution. flexlife-10 will not adhere to other cables in a cable carrier. Cables secured with ties to a stationary support or bundled together need to slide freely under the tie without pinching conductors or cables. Whether a molded connector or hardwired cable is used, each end of the cable needs proper strain relief. Cable Bundling Techniques Bend Radius for Moving Applications C-Track Providing sufficient bend radius will allow the cable to absorb the energy of bending over a greater portion of its length, increasing its effective working life. Small increases in the radius of the bend can produce substantial increases in cable life.
6 Part Numbers and Specifications flexlife-10 is available in 30, 100 and 200 meter lengths in spooled, self-feeding packages or as cordsets with a choice of industry standard molded connectors. flexlife-10 cable specifications, part numbers and suitable connector style are listed below. Consult the Cordset Catalog for more information on connector styles and cordset options or contact TURCK application support at for custom designs. flexlife-10, TPE cable styles, UL and CSA approvals, operating temperature, +80 C (+176 F) and +105 C (+221 F), cold flexibility -40 C (-40 F), 300 V. flexlife-10, PUR cable styles, UL and CSA approvals, operating temperature +80 C (+176 F, cold flexibility -40 C (-40 F), 300 V. eurofast flexlife Grey 5.7 RF M RF M RF M 30.6 TPE cable jacket, PTFE flex-wrap, Polyester conductors. Temperature 105 C, 300 V, UL recognized, CSA FT1 colors: Bn,Bu,Bk 4 22 Grey 5.7 RF M RF M RF M 29.5 TPE cable jacket, PTFE flex-wrap, Polyester conductors. Temperature 105 C, 300 V, UL recognized, CSA FT1 colors: Bn,Wh,Bu,Bk 5 22 Grey 5.7 RF M RF M RF M V, UL recognized, CSA FT1 colors: Bn,Wh,Bu,Bk,Gy 6 24 Grey 5.7 RF M RF M RF M V, UL recognized, CSA FT1 colors: Bn,Wh,Bu,Bk,Gy,Pk 8 24 Grey 5.7 RF M RF M RF M V, UL recognized, CSA FT1 colors: Wh,Bn,Gn,Ye,Gy,Pk,Bu,Rd flexlife-10 cables are available in 30, 100 or 200 meter lengths, delivered to you in a spooled, self-feeding package or as a complete molded cordset. Consult factory for cordset options.
7 Part Numbers and Specifications eurofast flexlife RF M RF M RF M V, UL recognized, CSA FT1 colors: Wh,Bn,Gn,Ye,Gy,Pk,Bu,Rd,Bk,Vt RF M RF M RF M V, UL recognized, CSA FT1 colors: Wh,Bn,Gn,Ye,Gy,Pk,Bu,Rd,Or,Bk,Tn,Vt picofast flexlife PUR/ 4.5 RF M RF M RF M 15.3 Snap-Lock or M8 PUR cable jacket, PTFE flex-wrap, Polyester conductors. Temperature 80 C, 300 V, UL recognized, CSA FT1 colors: Bn,Bu,Bk 4 26 PUR/ 4.5 RF M RF M RF M 15.8 Snap-Lock or M8 PUR cable jacket, PTFE flex-wrap, Polyester conductors Temperature 80 C, 300 V, UL recognized, CSA FT1 Cond colors: Bn,Wh,Bu,Bk 6 26 PUR/ 5.1 RF M RF M RF M 22.1 Snap-Lock or M8 PUR cable jacket, PTFE flex-wrap, Polyester conductors. Temperature 80 C, 300 V, UL recognized, CSA FT1 colors: Bn,Wh,Bu,Bk,Gy,Pk
8 Part Numbers and Specifications minifast flexlife RF H RF H RF H /8-16UN TPE cable jacket, PTFE flex-wrap, Polyester conductors. Temperature 105 C, 300 V, UL recognized, CSA FT1 colors: Bn,Wh,Bu,Bk RF M RF M RF M /8-16UN 1-16UN 300 V, UL recognized, CSA FT1 colors: Bk,Wh,Rd,Og,Bu,Gr RF M RF M RF M UN 300 V, UL recognized, CSA FT1 colors: Bk,Wh,Rd,Og,Bu,Gr,Wh/Bk RSF M RSF M RSF M UN 300 V, UL recognized, CSA FT1 colors: Bk,Wh,Rd,Og,Bu,Gr, Wh/Bk,Rd/Bk RSF M RSF M RSF M /8-16UN 300 V, UL recognized, CSA FT1 colors: Bk,Wh,Rd,Og,Bu,Gr, Wh/Bk,Rd/Bk,Gr/Bk RSF M RSF M RSF M /8-16UN 300 V, UL recognized, CSA FT1 colors: Bk,Wh,Rd,Og,Bu,Gn,Wh/Bk, Rd/Bk,Gn/Bk,Og/Bk flexlife-10 cables are available in 30, 100 or 200 meter lengths, delivered to you in a spooled, self-feeding package or as a complete molded cordset. Consult factory for cordset options.
9 Part Numbers and Specifications multifast flexlife RF M RF M RF M 57.0 M V, UL recognized, CSA FT1 colors: Rd,Pk,Ye,Gn,Wh,Bu,Br,Or,Bk, Gy,Tn,Vt RF M RF M RF M M V, UL recognized, CSA FT1 colors: Bn,Bu,Wh,Gn/Ye,Og,Ye, Gy,Pk,Rd,Bn/Wh,Bu/Wh,Gn/Wn RF M RF M RF M 60.2 M V, UL recognized, CSA FT1 colors: Bn,Og,Tn,Bu,Gn,Pk,Rd,Wh,Bk, Rd/Bu,Gy/Bn,Ye,Gy,Vt RF M RF M RF M 78.3 M V, UL recognized, CSA FT1 colors: Bn,Tn,Bu,Ye/Bn,Gn,Wh/Ye,Pk, Bn/Gn,Bk,Wh/Gn,Rd/Bu,Gy/Pk,Og,Gy,Rd,Wh,Vt,Gy/Bn,Ye 19 3/18 16/ RF M RF M RF M M V, UL recognized, CSA FT1 colors: Vt,Rd,Gn,Bk,Wh,Ye,Pk,Pd/Bu, Gy/Pk,Gy/Bn,Wh/Gn,Wh/Ye,Wh/Gy,Ye/Bn,Bn/Gn PUR/ 12.2 RF M RF M RF M M23 PUR cable jacket, PTFE flex-wrap, Polyester conductors Temperature 80 C, 300 V, UL recognized, CSA FT1 colors: Vt,Rd,Gn,Bu,Bk,Wh,Ye,Pk, Rd/Bu,Gy/Pk,Gy/Bn,Wh/Gn,Wh/Ye,Wh/Gy,Gn/Ye,Ye/Bn,Bn flexlife-10 cables are available in 30, 100 or 200 meter lengths, delivered to you in a spooled, self-feeding package or as a complete molded cordset. Consult factory for cordset options.
10 Cable Test Data flexlife-10 Tests to 10,000,000 Flex Cycles and Beyond Our Flex Testing Protocol is designed to replicate the application environment continuous flex cables would endure while installed in the most abusive automated systems. Applications such as robotic assembly in automotive plants, pick-and place machines, packaging equipment and automated medical test equipment where the combined multi-axis motions of twisting, bending and continuous flexing occurs 24/7 for many millions of cycles. Torsional Flex Test The cable is subjected to 360 torsion twisting while the cable rolls back and forth over a pulley at a rate of 30 cycles per minute. This test runs continuously to replicate an abusive robotic application. Bend Flex Test This test simulates cable installed to fit around devices where the cable repeatedly bends on a 180 plane, back and forth over a 6-8 inch radius at a rate of 30 cycles per minute. This tic toc motion simulates many different extreme motion applications. TURCK flexlife-10 cables are tested on our internal cable 'torture' machine. Test parameters and results are as follows. Note that the cables are still in test as there have not been any failures yet! Rolling/Torsional Test (Twist and Roll) Parameters Bending Radius 10 x OD Travel Distance 1.0 ft (30.5 cm) Cycle Time 2 seconds Acceleration Varies up to 26 ft/s 2 (792 cm/sec 2 ) Temperature Range +16 C to +23 C (+61 F to +73 F) Speed of Travel 6.5 to 13 ft/s ( cm/s) Torsional Stress ±160 /ft (±520 /meter) Results 12 Conductor 18 >21 million (still going) 19 Conductor 3x18,16x22 >21 million (still going) Bending Flex Test (Tic-Toc) Parameters Bending Radius 10 x OD Bending Angle ±90 from horizontal Cycle Time 2 Seconds Acceleration Varies up to 26 ft/s 2 (792 cm/s 2 ) Temperature Range +16 C to +23 C (+61 F to +73 F) Results 8 Conductor 24 >25 million (still going) 12 Conductor 18 >20 million (still going)
11 Tests prove our new flexible cable outlasts the competitors 2 to 1 Actually, the testing was done a little differently, but the results were equally impressive. Our new flexlife 10 continuously flexible cable withstands over 10 million cycles of both torsion stress and flexing tests, several times more than any other product. And it also has a superior minimum bending radius allowing it to flex further while it outperforms every other cable in robotic, continuous flex, bending, twisting, high speed and cable track applications. How does it compare? TPE jacket PTFE flex facilitator Alloy conductors Polyester elastomer Test Conditions (7 x 24 ) OLFLEX -Robot 900 TURCK flexlife 10 Bending Radius Factor 10 x OD 10 x OD Torsion Stress* >2 million cycles >15 million cycles Flexing Test 5,893,665 cycles >11 million cycles UL/CSA Approvals No Yes *OLFLEX tested at ±540 /1 m; TURCK tested at ±360 /2' Test still in progress OLFLEX is a registered trademark of the LAPP Group What makes it flex better? It starts with our unique custom alloy conductors, encased in our specially-blended polyester elastomer insulation. Add our slippery PTFE flex facilitator that eliminates heat buildup and wrap it with our specially-formulated thermoplastic elastomer jacket, and you ve got a cable that flexes better and lasts longer. Buy the complete cordset Now you don t need to spec your cable and connector from different sources, or rely on field-wireable connectors. TURCK can supply the complete cordset with any connector you need. Any way you want it At TURCK, we can supply the exact connectors you need including more than 13,000 popular models alone. Standard or custom colors. Cable diameters from 4.4 to 13.2 mm and gauges from Conductors from 3 to 25. Braided or shields. Straight. Right angle. Retractable. Built-in LED s. Choose from five major family types, including a full line of receptacles, inserts, and adapters for your buses, panels, circuit boards and machines. Call us with your next application: cordsets@turck.com TURCK Inc.
12 The Industry Leader in Proximity Sensing, Connectivity and Interface Solutions EZ-track Encoders multipin s V*fast Junction Boxes Order B0310 Order B3050 Flow and Temperature Monitors Pressure Sensors Order B0406 Proximity Sensors Order B0145 Order B0401 Cordsets Raw Cable Order B0155 Order B0158 Order B2000 Contact TURCK for the Latest Literature: Sensors Division - sensors@turck.com Cordset Division - cordsets@turck.com Intrinsic Safety Division - barriers@turck.com Toll Free TURCK Order B2001 Order B0180 TURCK USA TURCK Canada TURCK Mexico TURCK Inc Campus Drive Minneapolis, MN Phone: (763) FAX: (763) Application Support: CHARTWELL ELECTRONICS, INC. 140 Duffield Drive Markham, Ontario Canada, L6G 1B5 Phone: (905) FAX: (905) TURCK Mexico S. de R.L. de C.V. Parque Industrial La Angostura Km 4.5 Carretera Saltillo-Zacatecas Saltillo, Coah C.P Mexico Phone: (52) FAX: (52) Printed in USA B0422 4/04 REV A
Continuous High-Flex Cable for Automated Systems flexlife-20 cable designs
Take advantage of the proven, 20 million flex cycle capabilities of any of flexlife-20 cable designs and eliminate the risk of plant downtime due to cable failure. Continuous High-Flex Cable for utomated
More informationCables for robot applications
Cables for robot applications 67 Primary cables Robot primary cable Cable design Internal conductor Special conductor Strand class VI (super-fine wire) Highly flexible Core insulation TPM or PUR Core identification
More informationCHAINFLEX CABLES TESTED FOR GUARANTEED PERFORMANCE
2016 CHAINFLEX CABLES TESTED FOR GUARANTEED PERFORMANCE Cables Undergo Strenuous Testing in True-To-Life Lab Guarantee Program Testing Q&A Product Guide p2 p3-p7 p8-p11 Cables need to survive many cycles,
More informationBUS UNITRONIC BUS CAN
BUS UNITRONIC BUS CAN For CAN bus systems; stationary applications; 120 Ω LAPP KABEL UNITRONIC BUS CAN UNITRONIC BUS CAN is designed to the CAN open and ISO11898 standard. It is well suited for high-speed
More informationContinuous Flex Data Cable
Order from MARYLAND METRICS P.O. Box 61 Owings Mills, MD 111 USA email: sales@mdmetric.com web: http://mdmetric.com Continuous Flex Data Cable 1 phones: ()8- (800)68-0 faxes: ()8-1 (800)8-99 Order from
More informationBus Cables & Industrial Ethernet Cables
Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com Bus Cables & Industrial Ethernet Cables 5 phones: (40)358-330 (800)638-830 faxes: (40)358-34
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. C 112 Series M12 - Connectors
Amphenol Amphenol-Tuchel Electronics GmbH C 112 Series M12 - Connectors We connect con The company Amphenol-Tuchel Electronics is a worldwide leader in electrical connectors and contacting devices. Our
More informationConnectorized and Pre-Loaded HIGH PERFORMANCE CABLE CARRIER SYSTEMS
Connectorized and Pre-Loaded HIGH PERFORMANCE CABLE CARRIER SYSTEMS TPC can provide complete packaged Cable Carrier solutions including the Connectors Within a cable carrier system, the cable package usually
More informationConnectivity for Ethernet
Industrial Ethernet standards such as Modbus TCP, EtherNet/IP, PROFINET and Ether- CAT have firmly established themselves in automation technology. These real-time Ethernet solutions differ both in terms
More informationInstructions. Cable with Armor F CAUTION. October Rev A
3M Single Conductor Accessory Breakout Kits (BOK's) for use with 3M Cable Accessories (Terminations, T-Bodies and Push-On Elbows) For Use With Single Conductor Accessories On Three-Core Conductor Cables
More informationThe Chan-L-Wire Pro Series Lighting Distribution
Lighting Distribution System Offers Maximum Flexibility The Chan-L-Wire Pro Series Lighting Distribution System offers maximum flexibility while saving up to 40% in labor installation costs. The system
More informationFLAT AND ROUND CABLE PRODUCT DESCRIPTION DESIGN ADVANTAGES. IDC Systems Cable
Cable PRODUCT DESCRIPTION Thomas & Betts flat cable provides the means to reduce mass and weight in flexible wiring assemblies. Available with PVC, TPE or FEP insulation, the cable is extruded to provide
More informationNational Wire and Cable and National Cable Molding Headquarters Los Angeles California
National Wire and Cable and National Cable Molding Headquarters Los Angeles California CAPABILITIES Medical Business Machines Communications Equipment Computer Equipment Audio Systems General Instrumentation
More informationMARKET SOLUTIONS AUTOMOTIVE
MARKET SOLUTIONS AUTOMOTIVE MARKET SOLUTIONS Automotive Market Solutions TPC Wire & Cable Corp. is a leading supplier of high-quality, high-performance wire, cable, connectors, and assemblies designed
More informationFlygt Submersible Motor Cables
Flygt Submersible Motor Cables This brochure contains an overview of the Flygt motor cable assortment. The cables are especially designed for submersible use and made of carefully selected materials. The
More information3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT
3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT For Tape Over Wire (TOW) and Wire-Over-Tape (WOT) Shielded Cable For 250 2000 kcmil cable with 650-mil primary insulation thickness Instructions
More informationHigh Performance TOR-SPRING EMI/RFI Cord Grips
High Performance TOR-SPRING EMI/RFI Cord Grips The Importance of Meeting EMC Requirements When specifying and designing today s electronic control and data acquisition systems, consideration must be given
More informationConnecting cables NEBS, for sensors
Connecting cables NEBS, for sensors Connecting cables NEBS, for sensors Product range overview Function Version Type code Connection technology (Electrical connection 2) Connecting cable Cable characteristic
More informationAPPLIANCES /// MTA, CST-100 II AND SL-156 CONNECTORS. CONNECTORS/ APPLIANCES MTA, CST-100 II and SL-156 Connectors
PPLINCES /// MT, CST-100 II ND SL-156 CONNECTORS CONNECTORS/ PPLINCES MT, CST-100 II and SL-156 Connectors Contents Introduction This catalog has been designed to assist you, our customer, identify products
More information3M Cold Shrink Splice Kit QS-III 5416A
3M Cold Shrink Splice Kit QS-III 5416A for Jacketed Concentric Neutral (JCN) and Concentric Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized systems may
More informationPREMIUM 5e F/UTP PRODUCTS
Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been
More informationInstruction Manual MODEL RSP SANITARY ELECTRONIC PRESSURE TRANSMITTER
Instruction Manual Anderson Instrument Co. Inc. 156 Auriesville Road Fultonville, NY 12072 1-800-833-0081 Fax 518-922-8997 www.andinst.com Instrument Model Number Instrument Serial Number MODEL RSP SANITARY
More informationPhoto: HELUKABEL â. Special cables
Photo: HELUKABEL Special cables Special cables The name HELUKABEL stands for standard cables and lines, cables for data technology, pre-assembled cables, cable accessories and also special cables such
More informationUNSIGNED HARDCOPY NOT CONTROLLED
SUBJECT: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS REFERENCES Cable and Harness Making Manager, Hardware Engineering Maintenance Revision Establishes requirements for the fabrication and inspection
More information3 Cold Shrink Products
3 Cold Shrink Products Low Voltage Splices 0-600V (1000V rated) 279 Cold Shrink Splices (0-1000V) 279 Cold Splicing Products 279 Resin Splices 0-600V (1000V rated) 281 Resin 284 3M 8420 and 8430 Series
More informationScotch Heavy Duty Vinyl Electrical Tape 22
Scotch Heavy Duty Vinyl Electrical Tape 22 Data Sheet July 2015 Description Agency Approvals & Self Certifications Scotch Heavy Duty Vinyl Electrical Tape 22 is a premium grade, 10-mil thick, vinyl insulating
More informationPRODUCT INFORMATION ETHERLINE PN FLEX. Info CPR: Article number choice under For Profinet applications Flexible use
Flexible use Industrial Ethernet cable Cat.5 for flexible use, for PROFINET- application Type B, design 2x2xAWG22/7 PVC or FRNC outer jacket, UL- approval Info CPR: Article number choice under www.lappkabel.com/cpr
More information3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series
3M Scotchcast Reenterable Signal and Control Cable Splicing Kits 78-R Series Instructions Voltage Rating: 1000 V, Temperature Rating: 90 C Kit Contents 78-R1 78-R2 78-R3 78-R4 78-R5 Sleeve Set 1 1 1 1
More informationTender Report for Supply and installation of LAN in *Biomedical Imaging and Bioinformatics Lab*
Tender Report for Supply and installation of LAN in *Biomedical Imaging and Bioinformatics Lab* General Scope of Work: Supply and installation of Computer Laboratory setup in MIU Location of Installation:
More informationSECTION COMMUNICATIONS HORIZONTAL CABLING
SECTION 271500 COMMUNICATIONS HORIZONTAL CABLING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. UTP cabling. 2. Telecommunications outlet/connectors including patch panels. 3. Cabling identification
More informationCoastal Carolina University RE-BID WILLIAMS BRICE RENOVATION AND REPAIR October 19, 2018 Construction Documents
PART 1 - GENERAL 1.1 SUMMARY SECTION 271500 COMMUNICATIONS HORIZONTAL CABLING A. Section Includes: 1. UTP cabling. 2. Telecommunications outlet/connectors. 3. Cabling system identification products. 1.2
More informationAutomatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces
Automatic s 2004 Automatic. All rights reserved. pdf 1.0 3-18-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable Plugs...................
More informationMaxiBridge mm Connectors. Ed Full-scale MaxiBridge 8 Pins Catalog E
MaxiBridge 2.54 mm Connectors Ed. 10 11.2014 Full-scale MaxiBridge 8 Pins Catalog E 074593 CABLE CONNECTOR SYSTEM GENERAL MaxiBridge Male and Female Connector The 2.54 mm single and dual row cable connector
More information3M Cold Shrink Splice Kit QS-III 5515A
3M Cold Shrink Splice Kit QS-III 5515A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric
More informationHN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/
Connectors Introduction 2004 Automatic Connector. All rights reserved. pdf 1.0 4-13-04 Contents Specifications........................... 2 Straight Cable Plugs...................... 3 Right Angle Cable
More informationCicoil. Not your father s flat cable
Cicoil Not your father s flat cable Innovative design enhancements make flat cables strong candidates for applications where round cable was once the natural choice. Typical Round Cable Components Flat
More informationPower and Control T YPE BY RAVI GANATR November/December IAEI NEWS
Power and Control 26 1999 November/December IAEI NEWS T YPE BY RAVI GANATR This article discusses how the requirements in both the installation code and the product standard are utilized to manufacture
More informationcase 5 temperature sensor cosine sensor sine sensor ground + 5V phase 2- phase 2+ phase 1- phase 1+
Motor Cables Accessories Motor Cables Extension cables tailo for use with Norgren NP Linear Motors are available in two different versions; standard and high flex for the use in trailing chains or cable
More informationCOMMON WORK RESULTS FOR INTEGRATED AUTOMATION DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More information3M Cold Shrink Splice Kit QS-III 5514A
3M Cold Shrink Splice Kit QS-III 5514A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric
More informationAbout Nexans 3. About Berk-Tek 4. Hyper Plus 5e Cat 5e UTP 5. HyperPlus 5e Plenum 6. Hyper Plus 5e Riser 10. HyperPlus 5e Patch 14
Table of contents About Nexans 3 About Berk-Tek 4 Hyper Plus 5e Cat 5e UTP 5 HyperPlus 5e Plenum 6 Hyper Plus 5e Riser 10 HyperPlus 5e Patch 14 HyperPlus 5e OSP 18 22 7/10/07 - http://www.berktek.com Page
More informationCable installation guidelines
The Quality Connection Cable installation guidelines Business Unit Industrial Projects 2 Cable installation guidelines www.leoni-industrial-projects.com GENERAL Installation methods Many different methods
More informationInstrumentation Cables
Instrumentation Cables 9 KEWBERG manufactures and supplies a wide range of Instrumentation cables, which are made using superior raw materials. These are extensively used in data acquisition systems, process
More informationKwangil Electronic Introduction
www.kicable.com Introduction Dear Valuable customs of Kwang IL Wire & Cable Co, Inc. First of all, I d like to appreciate all the supports and cooperations given to us, and we sincerely hope all of you
More informationPan-International Wire & Cable (M) Sdn. Bhd.
Since its full operation in 1993, Pan-International Wire & Cable (Malaysia) Sdn Bhd has become the specialist of wire & cable manufacturing for the telecommunication, computer, internet & multimedia industries
More informationCold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL
Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std. 404 35 kv Class 250 kv BIL Kit Number 5798A-MT Cable Range Requirements Cable Insulation O.D.
More informationPOET-1 P.O.E. TEST PORT MEASUREMENT TOOL INSTRUCTION BOOK
POET-1 P.O.E. TEST PORT MEASUREMENT TOOL INSTRUCTION BOOK IB6386-01 9-1-2015 TABLE OF CONTENTS DESCRIPTION 2 HOW TO CABLE THE POET-1 2 HOW TO TAKE A MEASUREMENT 3 EASE OF USE 3 APPLICATIONS 3 CARE AND
More informationF CAUTION. Jacketed Concentric Neutral (JCN) Cable. Concentric Neutral (CN) Cable. IEEE Std. No. 48 Class 1 Termination 15 kv Class 110 kv BIL
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief 7642-S-2 For Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) Cable Instructions IEEE Std. No. 48 Class
More information3M Cold Shrink Foldback Splice Jacket Kit
3M Cold Shrink Foldback Splice Jacket Kit SJ-FB Instructions! CAUTION Working around energized systems may cause serious injury or death. Installation should be performed by personnel familiar with good
More informationUp to 85% higher Service Life due to efficient sealing method.
Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348
More informationProcessing Specification MiniBridge IDC
Processing Specification MiniBridge IDC ERNI Electronics GmbH & Co. KG Seestrasse 9 l 73099 Adelberg / Germany l +49 7166 50-0 l www.erni.com Version 5 IMS Verarbeitungsspezifikationen Seite 1 von 11 Table
More informationInstallation Manual SaVi Note Underwater LED Light
Installation Manual SaVi Note Underwater LED Light Model Numbers SAVI-NOTE7, SAVI-NOTE0 Table of Contents Safety Precautions...2 SaVi Note Install Instructions...3- M Instructions...- Warnings READ AND
More information3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-500-1000 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL F CAUTION Working around
More informationwith additional normally-open signalling contact l With integrated AS interface Safety at Work.
Safety Hinge Switch SHS3 In addition to the plug connection version, an SHS with fixed cable connection at the rear is also available Right and left hinged systems possible for optimum cable routing Mounting
More informationYour Global Automation Partner. Ultrasonic Sensors
Your Global Automation Partner Ultrasonic Sensors At TURCK, we understand that not every application is the same. That s why we dedicate ourselves to finding the optimal engineered solution for every application;
More information3 SLiC Aerial Closure with Rubber End Seal
3 Aerial Closure with Rubber End Seal Instructions 1.0 General 1.1 This instruction bulletin describes the assembly of the 3M Aerial Closure with external bonding hanger brackets. These closures are suitable
More information24-Fiber LANLINXS (Model # ) 48-Fiber LANLINXS (Model # ) User Manual
24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual 24-Fiber LANLINXS (Model # 055-8632-5000) 48-Fiber LANLINXS (Model # 055-8832-5000) User Manual, Part Number
More informationHow Wire Fails Originally presented to the Society of Motion Picture and Television Engineers Convention, Sydney, Australia, on Friday, July 4, 1997.
How Wire Fails Originally presented to the Society of Motion Picture and Television Engineers Convention, Sydney, Australia, on Friday, July 4, 1997. ABSTRACT: By Stephen H. Lampen Technology Development
More information0.3 mm Pitch, 1.5 mm Mated Height, Board- to-fine Coaxial Cable Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationWater blocking tape. Locator ridge HPA-0486
Table of Contents STANDARD RECOMMENDED PROCEDURE 004-138 ISSUE 1 MARCH 2012 PAGE 1 OF 12 Sheath Removal and Mid-Span Access of Dielectric ALTOS Cable with FastAccess Technology p/n 004-138, Issue 1 1.
More information3M Scotchcast Flexible Power Cable Splice Kits 82-F Series
3M Scotchcast Flexible Power Cable Splice Kits 82-F Series For use in weather-exposed, direct burial or submerged locations. For making in-line splices on non-shielded portable power cables and cords rated
More information3. Electronics and MMU2 unit assembly
Written By: Jakub Dolezal 2018 manual.prusa3d.com/ Page 1 of 34 Step 1 Tools necessary for this chapter Please prepare tools for this chapter: 2.5mm Allen key for M3 screws 2mm Allen key for nut alignment
More information03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through
Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF
More informationAMERICAN NATIONAL STANDARD
Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 129 2017 Drop Passives: Bonding Blocks (Without Surge Protection) NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE Specification for F Connector, Male, Pin Type
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 124 2011 Specification for F Connector, Male, Pin Type NOTICE The Society of Cable Telecommunications Engineers
More information2178-L/S Series Fiber Optic Splice Case with Gasket
2178-L/S Series Fiber Optic Splice Case with Gasket Instructions for: 2178-S Splice Case 2178-LS Splice Case 2178-LL Splice Case 2181-LS Cable Addition Kit May 1997 34-7041-9949-5-A 1 Table of Contents
More informationEthernet Series. Etherplug Etherlink V Etherlink V Specialty Connectors Specifi cations...
Etherplug... - Etherlink V... - Etherlink V... -0 Specialty Connectors.. - Specifi cations... - M- Mencom Corporation TEL: 0-- www.mencom.com Etherplug Series Receptacles Panel Mount RJ to MDE Panel Mount
More informationSafe, Accurate, and Repeatable
Safe, Accurate, and Repeatable It is common for high-speed data cable to utilize two or more shielded twisted conductors. This type of cable is common in all digital electronic networks, and it requires
More informationAutomation. Automation. Guide for Servo Motors/Drives and BUS Systems. Make the right connection.
ÖLFLEX UNITRONIC EPIC SKINTOP ETHERLINE HITRONIC SILVYN FLEXIMARK Automation Make the right connection. Automation Guide for Servo Motors/Drives and BUS Systems Make the right connection. At the Lapp Group
More informationGenSPEED 10 MTP Category 6A Cable An Unshielded 6A Cable with Superior Protection Against Alien Crosstalk
GenSPEED A Cables GenSPEED 10 MTP A Cable An Unshielded 6A Cable with Superior Protection Against Alien Crosstalk 10 MTP unshielded-twisted pair (UTP) design provides industry-leading protection from external
More information6000 Series Patch Panel Terminating Instructions
6000 Series Patch Panel Terminating Instructions INTRODUCTION The 6000 Series patch panels include a unique feature not found on any other patch panel. This feature allows you to angle each of the four
More informationUltra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated Height Comparison (With E.FL series) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
More informationHARTING Ethernet cabling cables and connectors, 4 wire
Industrial Cat. 5e Standard cable, 4-wire Type A for permanent installation or to build-up PROFINET system cables PVC X 8 wire X Cat. 5e X Cat. 6 Cat. 6 A Cat. 7 Cable structure Core structure Wire insulation
More informationTROJANUVTORRENTTM. Drinking Water Disinfection
TROJANUVTORRENTTM Drinking Water Disinfection Drinking Water Treatment. No Compromises. Revolutionary technology platform from the industry leader UV s environmental and water quality benefits for disinfection
More informationPRODUCT INFORMATION. ETHERLINE EC Flex Cat.5e M8
Industrial Ethernet EC Patchcord M8 Industrial Ethernet Patchcord, EtherCat, Cat.5e, plug M8, PVC, flexible Info For EtherCAT applications Other types are available at www.lappgroup.com/assemblyfinder
More informationERbic Bus Interface Connector System. Catalog E /06 Edition 4
ERbic Bus Interface Connector System www.erni.com Catalog E 074441 01/06 Edition 4 www.erni.com 2 Catalog Katalog D E 074441 074440 01/06 Edition Ausgabe 4 3 www.erni.com Table of Contents ERNI bus interface
More informationPivot Power RJ45 Modular Plug Connectors
Pivot Power RJ45 Modular Plug Connectors Application Specification 114-32052 07 OCT 13 i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationOCT 15 Rev B
AMP+ HVA280-3pxm XE High-Voltage Plug Connector with 1-Stage Latching Application Specification 114-32125 15 OCT 15 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets].
More informationNC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informationIndustrial Loadbreak Elbow
Industrial Loadbreak Elbow 200 A 5, 8, and 15 kvclass 5810 Series Installation Instructions 1.0 General The 3M Industrial Loadbreak Elbow connector is a fullyshielded and insulated plug-in termination
More information2178 L/S Series Fiber Optic Splice Cases and Accessories
2178 L/S Series Fiber Optic Splice Cases and Accessories The 3M 2178 Fiber Optic Splice Case family has always given you great protection for fiber optic connections. Now, the addition of 3M 2178-L/S Series
More informationVITALink Taped Splice Straight Through Crimp
A Marmon Wire & Cable Berkshire Hathaway Company VITALink Taped Splice Straight Through Crimp 2 Hour Fire-Rated Splice VITALink MC Cables, UL FHIT 120 Installation Instructions Description The VITALink
More informationScotchlok Connectors and Tools
Scotchlok Connectors and Tools Proven Solutions For Today s Applications A New Series of Tools and Connectors from 3M. Over 45 years ago, 3M introduced the industry s original insulation displacement connector
More information75 Ohm BNC Male Connector Crimp/Solder Attachment for PE-B159, 1855A, Mini 59
75 Ohm BNC Male Connector Crimp/Solder Attachment for PE-B159, 1855A, Mini 59 RF Connectors Technical Data Sheet PE44625 Configuration BNC Male Connector 75 Ohms Straight Body Geometry Features Max Operating
More information3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500
3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500 for Jacketed Concentric Neutral (JCN) and Flat Strap Neutral Cable Instructions IEEE Std. 404 15 kv Class 150 kv BIL CAUTION Working around energized
More information3M Scotchcast Mine and Portable Cable Splice and Jacket Repair Kit M-40
3M Scotchcast Mine and Portable Cable Splice and Jacket Repair Kit M-40 Instructions 1 & 2 For Jacket Repair (pages 2 & 7) Supplemental Instructions for: Insulation Repair (page 12) Conductor Repair (page
More informationFOSC 450 C6 and D6 Closures
FOSC 450 C6 and D6 Closures I N S T A L L A T I O N I N S T R U C T I O N Fiber Optic Splice Closure 1. General Product Information The FOSC 450 C6 and D6 fiber optic splice closures use compressed gel
More informationINSTRUCTION DE SÉCURITÉ SAFETY INSTRUCTION Mandatory as defined in SAPOCO/42 FIRE PREVENTION FOR CABLES, CABLE TRAYS AND CONDUITS
CERN INSTRUCTION DE SÉCURITÉ SAFETY INSTRUCTION Mandatory as defined in SAPOCO/42 Edms 335813 TIS IS 48 Edited by: TIS/GS Publication Date: June 2001 Original: English FIRE PREVENTION FOR CABLES, CABLE
More informationNCB-C6SGRYR M Category 6 STP Solid Cord. Specification. Doc. Version: /09/30
NCB-C6SGRYR-305 305M Category 6 STP Solid Cord Specification Doc. 2010/09/30 Version History Date Version Description 2010/04/13 1.0 Initial (Dennis Yu) Add Conductor OD Insulation Material/OD/Average
More information3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS
3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS-350-1000 for Tape Shield, Wire Shield, UniShield, and Longitudinally Corrugated (LC) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION
More informationTHE CABLE TRAY SYSTEM
C A B L E S A N I T A T I O N C A B L E T R A Y S Y S T E M S THE CABLE TRAY SYSTEM The SILTEC cable tray system is a product, developed for optimum functionality and with focus on simplicity and accessibility,
More informationPT8420 Cable Actuated Sensor Industrial ma 0..20mA
PT8 Cable ctuated Sensor Industrial.. m..m bsolute Linear Position to 6 inches (5 mm) luminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 / NEM 6 Hazardous rea Certification
More informationELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE
NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved
More information2178 Fiber Optic Splice Case and 2181 Cable Addition Kit
2178 Fiber Optic Splice Case and 2181 Cable Addition Kit Instructions January 1994 Issue 1, 34-7029-6387-6 1 2 Contents: 1.0 General... 4 2.0 Specifications... 4 3.0 Kit Contents... 5 SECTION 1: 2178 Splice
More informationFlexibility and Safety. BERNSTEIN safety hinge switches
Flexibility and Safety BERNSTEIN safety hinge switches BERNSTEIN safety hinge switches Advantages of safety hinge switches in comparison to traditional door contacts Easy to install and tamper-resistant
More informationHighlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors
Cables & Adaptors Highlights: Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Adaptors www.pcb.com 716-684-0001 PCB Piezotronics, Inc. Automotive Sensors Division Common
More information3M Cold Shrink QS-III Splice Kit 5467A(S)-WF
3M Cold Shrink QS-III Splice Kit 5467A(S)-WF for Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. 404 35 kv Class 250 kv BIL F CAUTION Working around energized systems may cause serious injury
More informationNon Magnetic Connectors
Non Magnetic Connectors Johnson Components builds coaxial connectors using innovative materials and design to provide Mil Spec Performance at a commercial price. Now we offer our Non Magnetic Connectors
More informationOASIS CSI (Certified Security Integrators) Direct Attach Warranty for ESS Devices
OASIS CSI (Certified Security Integrators) Direct Attach Warranty for ESS Devices Berk-Tek recommends installing a well-designed structured cabling channel per the TIA standards. This includes up to 100
More information