PHASE VISLINK: Satcom

Transcription

1 PHASE VISLINK: Satcom MANTIS Flyaway Antennae..p. 2 MANTIS M-SAT Man Portable Data Terminal...p. 8 FLYDRIVE Motorized Flyaway Antenna...p. 12 NEWSWIFT Motorized Flyaway Antennae...p. 14 AUC5000 Block Converter.....p. 22 APS5000 Protection Switch....p. 22 ACU Antenna Control Unit...p. 24 ADM5100 Satellite MESH Modem.p. 26 NEWSTREAM Multi-Mode Van/OB Transmit System p. 28 IRD5200 DVB-S2 Receiver w/ H.264/MPEG2.p. 30 UltraCoder HEVC Encoder p. 32 UltraDecoder HEVC Decoder p. 34

2 Mantis 120 Flyaway Antenna System The World s Most Popular Flyaway Solution OVERVIEW A comprehensive range of lightweight, compact satellite terminals for all transportable applications. BENEFITS Available in single, dual, tri and quad band configurations Bands available X, Ku & DBS Fully compliant with all satellite operator specifications Electronics available in single thread, power combined or 1:1 redundant configuration Antennas are approved for use with most Satellite operators Variety of uplink electronics pac-ges available 1.2m Mantis Available in most colours to order Co-polar Rx available on Ku antennas Second Rx port available on C Band linear antennas Key Features Manufactured using latest carbon fibre composite materials for minimum weight Easily deployed by a single user Compact design, IATA weight compliant options Typical Applications Satellite Newsgathering Remote Newsgathering

3 SPECIFICATIONS 1.2m MANTIS CONFIGURATION Offset fed FREQUENCY Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz TX GAIN Tx 38.4 dbi 8.15 GHz Tx 43.3 dbi GHz Tx 45.2 dbi GHz G/T 7.40 GHz = 15.3 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 19.2 dbk (assumes LNB 60 db gain 0.7 db NF) GHz = 19.2 dbk (assumes LNB 60 db Gain 0.7 db NF) MEETS THE REQUIREMENTS OF ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT ESS-502 MIL STD A STANAG 4484 (as applicable) CROSS POLARISATION ISOLATION X Band Circular 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear -35 db PORT TO PORT ISOLATION Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db MECHANICAL Mount: Elevation over azimuth Operation Manual MANUAL MOVEMENT Azimuth adjustment: +/- 180 coarse adjust, +/- 2.5 fine adjust Elevation adjustment: 0 to 90 (with adjustable mount elevation) Polarisation adjustment: +/-95 (Linear polarisation only) STANDARD DIMENSIONS & WEIGHTS Single case Dimensions 495 x 1050 x 650mm [19.5 x 41.3 x 25.6 ] <43 kg (94.8 lbs) IATA DIMENSIONS & WEIGHTS Standard case Dimensions 800 x 600 x 250 mm [31.5 x 23.6 x 9.8 ] <20 kg (44 lbs) Rugged case Dimensions 850 x 650 x 320 mm [33.5 x 25.6 x 12.6 ] <30Kg (66 lbs) including op Antenna case Dimensions 495 x 1050 x 650 mm [19.5 x 41.3 x 25.6 ] 31.9 kg [70.3 lbs] Feedarm case Dimensions 1290 x 340 x 135 mm [50.8 x 13.3 x 5.3 ] kg [37.4lbs] Petal & Waveguide Softpack Dimensions 1160 x 570 x 230 mm [45.7 x 22.4 x 9 ] 12 kg [26.5 lbs] TEMPERATURE 20 C to +60 C (-4 F to 140 F) Transport: 40 C to +70 C(-40 F to 158 F) WINDSPEEDS 14 m/s (30 mph) Survival: 27 m/s (60 mph) HUMIDTY 0 to 100% RH sales@vislink.com 02/15 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

4 Mantis 190/240 Flyaway Antenna System The World s Most Popular Flyaway Solution OVERVIEW A comprehensive range of lightweight, compact satellite terminals for all transportable applications. BENEFITS Mantis is available in 1.9m and 2.4m antenna sizes Available in single, dual, tri and quad band configurations Bands available: 1.9m - C, X, Ku & DBS 2.4m - C, X, Ku & DBS Fully compliant with all satellite operator specifications Motorised tracking option for inclined orbit operation Electronics available in single thread, power combined or 1:1 redundant configuration 1.9m Mantis Antennas are approved for use with most Satellite operators Variety of uplink electronics packages available Available in most colours to order Co-polar Rx available on Ku antennas Second Rx port available on C Band linear antennas Key Features Manufactured using latest carbon fibre composite materials for minimum weight Easily deployed by a single user Compact design, IATA weight compliant options Typical Applications Satellite Newsgathering Remote Newsgathering

5 SPECIFICATIONS 1.9m MANTIS TYPE Circular (axially symmetric) segmented CONFIGURATION Prime focus MEETS THE REQUIREMENTS OF ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT ESS-502 MIL STD A STANAG 4484 (as applicable) MECHANICAL Mount: Elevation over azimuth OPERATION Manual and/or 2 axis motorisation MOVEMENT Azimuth adjustment: +/ 180 coarse adjust (restricted elevation), +/ 2.5 fine adjust Elevation adjustment: 0 to 90 (with adjustable mount elevation) Polarisation adjustment: +/ 95 (Linear polarisation only) FREQUENCY C CP: Tx 5.85 to GHz Rx to 4.2 GHz C LP: Tx 5.85 to 6.65 GHz (option to GHz) Rx 3.40 to 4.2 GHz Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from 13.0 GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz TX GAIN Tx 40.1 dbi 6.25 GHz Tx 42.4 dbi 8.15 GHz Tx 47.2 dbi GHz Tx 49.2 dbi GHz G/T 3.95 GHz = 15.0 dbk (assumes LNB 60 db Gain 0.5 db NF) 7.40 GHz = 19.3 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 23.3 dbk (assumes LNB 60 db gain 0.7 db NF) GHz = 23.3 dbk (assumes LNB 60 db Gain 0.7 db NF) CROSS POLARISATION ISOLATION C Band Linear 30 db Tx / Rx C and X Band Ciruclar 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear 35 db PORT TO PORT ISOLATION C Band Linear Tx / Rx 35 db (90 db incl filter) Rx / Tx 35 db C Band Circular Tx / Rx 20 db (80 db incl filter) Rx / Tx 20 db X Band Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Ku Band Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db DBS Band Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db STANDARD DIMENSIONS & WEIGHTS Mount case Dimensions 540 x 540 x 510 mm [21.2 x 21.2 x 20 in ] 25 kg [55.1 lbs] Segment case Dimensions 810 x 810 x 490 mm [31.9 x 31.9 x 19.2 ] 54 kg [119 lbs] IATA DIMENSIONS & WEIGHTS Mount case Dimensions 540 x 540 x 510 mm [21.2 x 21.2 x 20 ] 29.5 kg [65 lbs] Hub & Segment case Dimensions 810 x 810 x 490 mm [31.9 x 31.9 x 19.2 ] 29.9 kg [67 lbs] Feedarm & Segment case Dimensions 900 x 765 x 365 mm [35.4 x 30.1 x 14.4 ] 28.7 kg [66 lbs] ENVIRONMENTAL TEMPERATURE -20 C to +60 C (-4 F to 140 F) Transport: -40 C to +70 C (-40 F to 158 F) WINDSPEEDS 12 m/s (27 mph) Survival: 20 m/s (45 mph) HUMIDTY 0 to 100% RH 2.4m MANTIS Type Circular (axially symmetric) segmented Configuration Prime focus Meets The Requirements of ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT ESS-502 MIL STD A STANAG 4484 (as applicable) Frequency C CP: Tx 5.85 to GHz Rx to 4.2 GHz C LP: Tx 5.85 to 6.65 GHz (option to GHz) Rx 3.40 to 4.2 GHz Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from 13.0 GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx Gain Tx 42.1 dbi 6.25 GHz Tx 44.4 dbi 8.15 GHz Tx 49.3 dbi GHz Tx 51.2 dbi GHz G/T 3.95 GHz = 17.0 dbk (assumes LNB 60 db Gain 0.5 db NF) X;7.40 GHz = 21.4 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 25.4 dbk (assumes LNB 60 db gain 0.7 db NF) GHz = 25.4 dbk (assumes LNB 60 db Gain 0.7 db NF) Cross Polarisation Isolation C Band Linear -30 db Tx / Rx C and X Band Ciruclar 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear -35 db Port to Port Isolation C Band Linear Tx / Rx 35 db (90 db incl filter) Rx / Tx 35 db C Band Circular Tx / Rx 20 db (80 db incl filter) Rx / Tx 20 db X Band Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Ku Band Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db DBS Band Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Mechanical Mount: Elevation over azimuth Operation Manual and/or 2 axis motorisation Movement Azimuth adjustment: +/ 180 coarse adjust, (restricted elevation) +/- 2.5 fine adjust Elevation adjustment: 0 to 90 (with adjustable mount elevation) Polarisation adjustment: +/-95 (Linear polarisation only) Standard Dimensions & s Mount case Dimensions 540 x 540 x 670 mm [21.2 x 21.2 x 26.4 ] 26 kg [57.3 lbs] Segment case (qty 2) Dimensions 990 x 990 x 490 mm [39 x 39 x 19.2 ] 49 kg [108 lbs] IATA Dimensions & s Mount case Dimensions 540 x 540 x 670 mm [21.2 x 21.2 x 26.4 ] 29 kg [63 lbs] sales@vislink.com Hub case: Dimensions 990 x 990 x 490 mm [39 x 39 x 19.5 ] 31 kg [68.3 lbs] Segement softbag (qty 3) Dimensions 1030 x 960 x 440 mm [40.5 x 37.8 x 17.3 ] 25.3 kg [55.7 lbs] Feedarm & catridge case (C-band only) Dimensions 1130 x 650 x 185 mm [44.5 x 25.6 x 7.2 ] 29.5 kg [65 lbs] Temperature 20 C to +60 C ( 4 F to 140 F) Transport: 40 C to +70 C ( 40 F to 158 F) Windspeeds 14 m/s (30 mph) Survival: 27 m/s (60 mph) Humidty 0 to 100% RH 02/15 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

6 Mantis LT Ultra-lightweight Antenna The Mantis LT Man antenna is a highly portable triband satellite antenna system designed for rapid deployment. Available with either a 90 or 120cm reflector its small size and weight makes it ideal for secure and non-secure satellite communications for a variety of applications. Key Features X, Ku & Ka Bands 90 or 120cm Reflector Man Portable Design Less than 5 minute Set-up time ITAR Free Typical Applications Satellite News-gathering Secure Military Communications First on Scene Broadcast Emergency Services Disaster Recovery

7 SPECIFICATIONS X-Band Tx Frequency Band GHz Rx Frequency Band GHz Polarization: Tx RHCP or LHCP configurable Rx Orthogonal to Tx Axial Ratio <2.0dB (Tx), <1.2dB (Rx) 90cm Version: Tx 8.15 GHz 35.3 dbw 7.5 GHz 13 db/k 120cm Version Tx 8.15 GHz 37.8 dbw 7.5 GHz 15.5 db/k Ku-Band Tx Frequency Band GHz Rx Frequency Band GHz Polarization Tx - Linear H/V Rx Orthogonal to Tx X-Polar 30 db 90cm Version: Tx GHz 40.1 dbw (25W) 11.7 GHz 18 db/k 120cm Version Tx GHz 42.6 dbw (40W) 11.7 GHz 20.5 db/k Ka-Band Tx Frequency Band GHz Rx Frequency Band GHz Polarization Tx RHCP or LHCP configurable Rx Orthogonal to Tx Axial Ratio <1.0dB (Tx), <1.5dB (Rx) 90cm Version: Tx 30.5 GHz 46.8 dbw (10W) 20.7 GHz 21.3 db/k 120cm Version Tx 30.5 GHz 49.3 dbw (10W) 20.7 GHz 24.0 db/ktx Frequency Band Physical Specification Transportability One airline checkable case Packing Optional Rucksack or rugged carry case in one or two box solution depending on reflector size 90cm version: 10.5 kg / <23lbs (without carry case) 120cm version: 14.5 kg / <31lbs (without carry case) IATA compliant Environmental Specification Operating Temperature: -20 C to +60 C Storage Temperature: -40 C to +80 C Operating Altitude: 3000m Survival Altitude: 4500m Operating Wind Speed (No ballast) 25mph Operating Wind Speed (With ballast) 45mph Shock MIL-810F Method procedure IV Vibration: MIL-810F Method procedure I Sand/Dust DEF STAN 00-35, Pt 3, Iss 4, Test CL25 Water Ingress DEF STAN 00-35, Pt 3, Iss 4, Test CL27 CE marked Radiation Pattern Compliance ITU-R S and S (90 & 120cm) FCC with (90cm & 120cm) ETSI EN (90 & 120cm) INTELSAT IESS-601 (90cm) INTELSAT IESS-602 (90cm) Registered with Intelsat, Eutelsat, Optus and Arabsat sales@vislink.com 04/16 - Rev 3 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

8 Mantis MSAT Man Portable Data Terminal This satellite antenna system is specifically designed for speed, ease of use and portability. The Mantis MSAT is a lightweight. Satellite terminal that can be set-up anywhere to provide secure and non-secure data and video transmission in as little as five minutes. It supports X and Ku- Band configurations ensuring worldwide coverage is available at all times. Frequency bands can be swapped in the field in under a minute. The Mantis MSAT is available with either a 65, 90 or 120cm reflector and is ideal for a variety of applications. Key Features X, Ku, (Ka, 65cm only) Frequency Bands Man Portable, IATA Compliant Mains or Battery Operation 5 Minutes to Air 65, 90, 120cm Reflectors ITAR Free Typical Applications Satellite News-gathering Secure Military Communications First on Scene Broadcast Emergency Services Disaster Recovery

9 SPECIFICATIONS X-Band Tx Frequency Band GHz Rx Frequency GHz EIRP 8.15GHz 45.3 dbw (65cm version) 48.1 dbw (90cm version) 51.0 dbw (120cm version) 7.5GHz 12.8 db/k (65cm version) 12.8 db/k (90cm version) 15.5 db/k (120cm version) Polarisation Tx RHCP or LHCP configurable Rx Orthogonal to Tx Axial Ratio <2.0dB (Tx), <1.2dB (Rx) Tx Spurious (Carrier Related) <-60 dbc Tx Spurious (Non Carrier Related) <-60 dbm BUC Power (saturated) 25 W Ku-Band Tx Frequency Band GHz Rx Frequency Bands From EIRP GHz 46.2 dbw (8W) (65cm version) 54.2 dbw (25W) (90cm version) 58.8 dbw (40W) (120cm version) 11.7GHz 14.1 db/k (65cm version) 19.0 db/k (90cm version) 20.5 db/k (120cm version) Polarisation Linear H/V Tx orthogonal to Rx Cross Polarization Isolation 30db Tx Spurious (Carrier Related) <-60dBc Tx Spurious (Non Carrier Related) <-70dBc BUC Power 3W - 40W Common Specification Power Requirements 10-36V DC VAC 280W (Max) External Battery Pack Option for DC Units Note: 10-36V DC available with 20W X Band and 8W (and lower) Ku Band terminals) Interfaces DC Power (Configuration dependent) AC Power L- Band Tx Interface (External Modem) L-Band Rx Monitor L-Band Modem Output RJ45 Ethernet (x2) EIA-530 (Modem dependant) DVE Encoder version with SDI Input Modems Modems may be exchanged at base level maintenance. Modem Options idirect e850mp Comtech DMD1050 Paradise Q-Lite modem Elbit Shiron modem Video Encoder Option Advent DVE 5100 (H.264) Certification Skynet 5 (X-Band) WGS (X & Ka Band) Planned Control Interface Simple two button operator interface for field level control. Embedded web server for control and Management using external PC for initial base level configuration. Alignment Interactive user interface providing look angle directions for the selected satellite using positional information from an internal GPS receiver. Integrated beacon receiver provides signal strength for peaking.. Physical Specification Transportability One airline checkable case Packing Optional Rucksack or rugged carry case in one or two box solution depending on reflector size 65cm version: 12.5 kg / 27.5lbs (without carry case) IATA compliant 90cm version: 15 kg / < 33lbs (without carry case) IATA compliant 120cm version: 19 kg / < 42lbs (without carry case) IATA compliant Environmental Specification Operating Temperature: -20 C to +55 C Storage Temperature: -40 C to +80 C Operating Altitude: 3000m Survival Altitude: 4500m Operating Wind Speed (No ballast) 25mph Operating Wind Speed (With ballast) 45mph IP Rating: IP65 Shock: MIL-810F (in transport packaging) Vibration: MIL-810F (in transport packaging) Sand/Dust DEF STAN 00-35, Pt 3, Iss 4, Test CL25 Water Ingress DEF STAN 00-35, Pt 3, Iss 4, Test CL27 Humidity: MIL-810F EMC BS EN BS EN CE marked Radiation Pattern Compliance ITU-R S and S (65, 90 & 120cm) FCC with (65, 90cm & 120cm) ETSI EN (65 & 90 & 120cm) ETSI EN (65cm) MIL-STD A (65cm) INTELSAT IESS-601 (90cm) INTELSAT IESS-602 (90cm) Registered with Intelsat, Eutelsat, Optus and Arabsat sales@vislink.com Rev 3.1 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

10 Motorised Mantis MSAT Man Portable Data Terminal This satellite antenna system is specifically designed for speed, ease of use and portability. The Motorised Mantis MSAT is a lightweight. Satellite terminal that can be set-up anywhere to provide secure and non-secure data and video transmission in as little as five minutes. It supports X and Ku-Band configurations ensuring worldwide coverage is available at all times. Frequency bands can be swapped in the field in under a minute. Designed for rapid deployment in hostile environments and now has a full 1 button auto acquire operation. The Mantis MSAT is available with either a 90 or 120cm reflector and is ideal for a variety of applications. Key Features 1 Button Auto Acquire 3 Axis simultaneous motorisation X, Ku Frequency Bands Mains or Battery Operation 5 Minutes to Air 90, 120cm Reflectors ITAR Free, IATA Compliant Typical Applications Satellite News-gathering Secure Military Communications First on Scene Broadcast Emergency Services Disaster Recovery

11 SPECIFICATIONS X-Band Tx Frequency Band GHz Rx Frequency GHz EIRP 8.15GHz 48.1 dbw (90cm version) 51.0 dbw (120cm version) 7.5GHz 12.8 db/k (90cm version) 15.5 db/k (120cm version) Polarisation Tx RHCP or LHCP configurable Rx Orthogonal to Tx Axial Ratio <2.0dB (Tx), <1.2dB (Rx) Tx Spurious (Carrier Related) <-60 dbc Tx Spurious (Non Carrier Related) <-60 dbm BUC Power (saturated) 25 W Ku-Band Tx Frequency Band GHz Rx Frequency Bands From EIRP GHz 54.2 dbw (25W) (90cm version) 58.8 dbw (40W) (120cm version) 11.7GHz 19.0 db/k (90cm version) 20.5 db/k (120cm version) Polarisation Linear H/V Tx orthogonal to Rx Cross Polarization Isolation 30db Tx Spurious (Carrier Related) <-60dBc Tx Spurious (Non Carrier Related) <-70dBc BUC Power 3W - 40W Common Specification Power Requirements VAC 280W (Max) External Battery Pack Option for DC Units Note: 10-36V DC available with 20W X Band and 8W (and lower) Ku Band terminals) Interfaces DC Power (Configuration dependent) AC Power L- Band Tx Interface (External Modem) L-Band Rx Monitor L-Band Modem Output RJ45 Ethernet (x2) EIA-530 (Modem dependant) DVE Encoder version with SDI Input Modems Modems may be exchanged at base level maintenance. Modem Options idirect e850mp Comtech DMD1050 Paradise Q-Lite modem Elbit Shiron modem Video Encoder Option Advent DVE 5100 (H.264) Certification Skynet 5 (X-Band) WGS (X & Ka Band) Planned Control Interface Embedded web server for control and management using external PC for initial base level configuration. Simple two button operator interface for field level control. Alignment One button auto acquire, using integrated GPS, compass and beacon / carrier receiver. Physical Specification Transportability One airline checkable case Packing Optional Rucksack or rugged carry case in one or two box solution depending on reflector size 90cm version: 23 kg / < 51 lbs (without carry case) IATA compliant 120cm version: 25 / < 56 lbs (without carry case) IATA compliant Environmental Specification Operating Temperature: -20 C to +55 C Storage Temperature: -40 C to +80 C Operating Altitude: 3000m Survival Altitude: 4500m Operating Wind Speed (No ballast) 25mph Operating Wind Speed (With ballast) 45mph IP Rating: IP65 Shock: MIL-810F (in transport packaging) Vibration: MIL-810F (in transport packaging) Sand/Dust DEF STAN 00-35, Pt 3, Iss 4, Test CL25 Water Ingress DEF STAN 00-35, Pt 3, Iss 4, Test CL27 Humidity: MIL-810F EMC BS EN BS EN CE marked Radiation Pattern Compliance ITU-R S and S (65, 90 & 120cm) FCC with (65, 90cm & 120cm) ETSI EN (65 & 90 & 120cm) ETSI EN (65cm) MIL-STD A (65cm) INTELSAT IESS-601 (90cm) INTELSAT IESS-602 (90cm) Registered with Intelsat, Eutelsat, Optus and Arabsat sales@vislink.com 04/16 - Rev 3 RD Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

12 AFD120 & AFD150 FlyDrive Motorised Flyaway Antenna Features High performance solution for rapid response Overview The ADVENT FlyDrive Antenna is the newest in the range of antenna solutions on offer. The FlyDrive is designed to function as a traditional flyaway as well as a semi-permanent vehicle mounted system. The FlyDrive draws on technology and design innovations of the well known and field proven Mantis Flyaway and NewSwift antennas. Advent has made its FlyDrive as easy as possible to operate. It offers full 3-axis motorised control with manual backup, satellite auto acquisition and tracking, with GPS if required. The FlyDrive can be fitted easily to most vehicle roof racks using standard fittings. The FlyDrive is easily transported in IATA weight compliant flight cases so that it can be taken on a commercial airline, for quick deployment by a single user anywhere in the world. Available with 1:2m or 1.5m relfector Bands available ƌƌ 1.2m - X, Ku, DBS & Ka ƌƌ 1.5m - C, X, Ku, DBS & Ka IATA weight compliant ƌƌ 1.2m - two cases ƌƌ 1.5m - three cases Satellite auto acquistion & tracking packages available Easily deployed by a single user Can be used as a flyaway or semipermanent vehicle mounted antenna system Drive control housed within main antenna case Combines with half rack 5000 series system electronics Software upgradeable for Auto-Acquire (ACU5216) and integral ASI Demod Option for multi-band capability by feed cartridge exchange Option for integral BUC with antenna for single thread operation enabling HPA FSK control via TX L-Band VISLINK News and Entertainment ADVENT s FlyDrive is fully adjustable, to +/- 200º azimuth, elevation 6º to 92º and polarisation adjustment +/- 95º. The drive control unit (DCU5000) is housed within the main antenna case, which makes this antenna very compact for operation in the field. The electronics for ADVENT FlyDrive s are available in single thread, power combined or 1:1 redundant configurations. Advent s 5000 range of electronics package compliments the FlyDrive perfectly. The 5000 series are half the width of a standard 19 rack mounted unit, a major advantage where space and weight are critical. For further information on the 5000 series of electronics please see separate datasheet.

13 Specifications Configuration Offset fed Mount Elevation over azimuth Meets The Requirements of ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT EESS-502 MIL STD A STANAG 4484 (as applicable)] Antenna Position Control Full 3 axis motor control with manual override mechanism Azimuth Adjustment +/- 200 Elevation Adjustment 6 to 92 Polarisation Adjustment +/- 95 Antenna Control Unit Serial remote interface One touch stow & deploy Fast / med / slow motor drive system Simultaneous positional feedback of Azimuth / Elevation / Polarisation axis with true elevation reading from calibrated inclinometer GPS based auto satellite acquisi- tion package Temperature Operational C to +60 C (-4 F to 140 F) Transport C to +70 C (-40 F to 158 F) Humidty: 0 to 100% RH Options GPS based auto-acquire upgrade package AFD120 FLYDRIVE Frequency...Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz....Tx to 14.5 GHz (option from GHz) Rx to GHz...Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz....Tx 27.5 to 30.0 GHz (option 30.0 to 31.0 GHz) Rx 18.2 to 21.2 GHz Tx Gain...Tx 38.4 dbi 8.15 GHz....Tx 43.3 dbi GHz...Tx 45.2 dbi GHz....Tx 49.4 dbi GHz G/T X; GHz = 15.3 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 19.4 dbk. (assumes LNB 60 db gain 0.7 db NF) GHz = 19.4 dbk.(assumes LNB 60 db Gain 0.7 db NF) GHz = 22.0 dbk.(assumes LNB 55 db Gain 1.6 db NF) Cross Polarisation Isolation X Band Circular db Tx (axial ratio 1.07) db Rx (axial ratio 1.22) Ku and DBS Band Linear db Ka Band Consult factory.. (all relative to co-polar gain within 1 db contour) Port to Port Isolation...Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db...tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db.tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db...tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db AFD150 FLYDRIVE Frequency...Tx 5.85 to 6.65 GHz Rx 3.4 to 4.2 GHz or...tx to GHz Rx 4.5 to 4.8 GHz...Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz....Tx to 14.5 GHz (option from GHz) Rx to GHz...Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz....Tx 27.5 to 30.0 GHz (option 30.0 to 31.0 GHz) Rx 18.2 to 21.2 GHz Tx Gain C;...Tx 38.0 dbi 6.25 GHz...Tx 40.3 dbi 8.15 GHz....Tx 45.2 dbi GHz...Tx 47.2 dbi GHz....Tx 51.3 dbi GHz G/T GHz = 13.5 dbk. (assumes LNA 50 db gain 0.5 db NF) X; GHz = 17.3 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 21.4 dbk. (assumes LNB 60 db gain 0.7 db NF) GHz = 21.4 dbk.(assumes LNB 60 db Gain 0.7 db NF) GHz = 24.0 dbk.(assumes LNB 55 db Gain 1.6 db NF) Cross Polarisation Isolation C Band Linear db Tx / Rx C and X Band Circular db Tx (axial ratio 1.07) db Rx (axial ratio 1.22) Ku and DBS Band Linear db Ka Band Consult factory.. (all relative to co-polar gain within 1 db contour) Port to Port Isolation...Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db...tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db...tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db.tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db...tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WEIGHTS / DIMENSIONS / WIND SPEED Dimensions / s FlyDrive 120 Case 1: x 540 x 358 mm 31.5 Kg (37 x 21.2 x 14 inches 69.4lbs) Case 2: x 580 x 400 mm 31.5 Kg.... (39 x 22.8 x 15.7 inches 69.4lbs) FlyDrive 150 Case 1: x 540 x 358 mm 31.5 Kg (37 x 21.2 x 14 inches 69.4lbs) Case 2: x 580 x 400 mm 26 Kg.... (39 x 22.8 x 15.7 inches 57.3lbs) Case 3: x 580 x 250 mm 29.5 Kg (39 x 22.8 x 9.8 inches 65lbs) Non-IATA 2-Case Configuration is available Windspeeds Operational...20 m/s (45 mph) Degraded roofrack...25 m/s (56 mph) Degraded flyaway m/s (67 mph) Survivial...50 m/s (112 mph) Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 4/1/2010

14 PRODUCT DATASHEET NewSwift CF Motorised Antenna OVERVIEW The NewSwift CF antenna is a highly compact integrated satellite terminal designed for rapid deployment. The NewSwift CF design allows for two HPAs, variable power combiner, redundancy switching and two upconverters to be integrated into the antenna assembly close to the feed, thereby minimising the waveguide loss and maximising the available EIRP. The fully weatherproof RF equipment is further protected from the weather by a removable cover thus ensuring reliable operation whatever the environmental conditions. FEATURES 1.2m, 1.5m or 1.8m reflector Bands available: 1.2m - X, Ku, DBS & Ka 1.5m - C, X, Ku, DBS & Ka 1.8m - C, X, Ku, DBS & Ka Full 3 axis control includes 360 azimuth range Elevation Adjustment - 6 to 91 GPS based auto satellite acquisition packages available 800 City database controller Tracking option with beacon receiver Full remote control Many models are Eutelsat and/or Intelsat type approved All models are approved for use with the majority of Satellite Providers Type - offset fed Configuration - prime focus Mount - elevation over azimuth Software upgradeable to auto-acquire (ACU5216) and integral ASI Demod Option for multi-band capability by cartridge exchange Available in any custom colour scheme QUALIFIED REQUIREMENTS ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT EESS-502 MIL STD A STANAG 4484 (as applicable) High Performance Compact Integrated Solution OPTIONS GPS based auto-acquire upgrade package Rotary joint for azimuth axis Co-polar receive facility for Ku Band ANTENNA POSITION CONTROL Linear Polarisation: Full 3 axis motor control with manual override mechanism Circular Polarisation: Full 2 axis motor control with manual override mechanism Polarisation Adjustment Linear: +/- 90 Circular: None Two HPAs located within the antenna assembly ANTENNA CONTROL UNIT Compact half width rack unit Serial remote interface One touch stow & deploy Fast / med / slow motor drive system Simultaneous positional feedback of Az / El / Pol axis with true elevation reading from calibrated inclinometer sales@vislink.com

15 SPECIFICATIONS 1.2M NEWSWIFT FREQUENCY Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx 27.5 to 30.0 GHz Rx 18.2 to 20.2 GHz (option Tx 30 to 31 GHz) Rx 20.2 to 21.2 GHz) GAIN Tx 38.4 dbi 8.15 GHz Rx 37.6 dbi 7.4 GHz Tx 43.3 dbi GHz Rx 41.2 dbi 11.2 GHz Tx 45.2 dbi GHz Rx 41.2 dbi 11.2 GHz Tx 49.4 dbi GHz Rx 46.1 dbi 19.7 GHz G/T 7.40 GHz = 15.3 dbk (Assumes LNA 50 db Gain 0.8 db NF) GHz = 19.4 dbk (Assumes LNB 60 db gain 0.7 db NF) GHz = 19.4 dbk (LNB 60 db Gain 0.7 db NF) GHz = 22.0 dbk (Assumes LNB 55 db Gain 1.6 db NF) CROSS POLARISATION ISOLATION X Band Circular 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear 35 db Ka Band Consult factory (All relative to co polar gain within 1 db contour) PORT TO PORT ISOLATION Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WEIGHTS Antenna 95Kg (209lbs) TEMPERATURE 20 C to +60 C ( 4 F to 140 F) Transport: 40 C to +70 C ( 40 F to 158 F) WINDSPEED 21 m/s (47 mph) Degraded 28 m/s (63 mph) Survival: 50 m/s (112 mph) HUMIDITY 0 to 100% RH 1.5M NEWSWIFT FREQUENCY Tx 5.85 to 6.65 GHz Rx 3.4 to 4.2 GHz (option Tx to GHz) Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx 27.5 to 30.0 GHz Rx 18.2 to 20.2 GHz (option Tx 30 to 31 GHz, Rx 20.2 to 21.2 GHz) GAIN Tx 38 dbi 6.25 GHz Rx 34 dbi 3.95 GHz Tx 40.3 dbi 8.15 GHz Rx 39.5 dbi 7.4 GHz Tx 45.2 dbi GHz Rx 43.1 dbi 11.2 GHz Tx 47.2 dbi GHz Rx 43.1 dbi 11.2 GHz Tx 51.3 dbi GHz Rx 48 dbi 19.7 GHz G/T 3.95 GHz = 13.5 dbk (Assumes LNB 60 db Gain 0.5 db NF) 7.40 GHz = 17.3 dbk (Assumes LNB 50 db Gain 0.8 db NF) GHz = 21.4 dbk (Assumes LNB 60 db gain 0.7 db NF) GHz = 21.4 dbk (Assumes LNB 60 db Gain 0.7 db NF) GHz = 24 dbk (Assumes LNB 55 db Gain 1.6 db NF) CROSS POLARISATION ISOLATION C Band Linear 30 db Tx/Rx X Band Circular 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear 35 db Ka Band Consult factory (all relative to co-polar gain within 1 db contour) PORT TO PORT ISOLATION Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WEIGHTS Antenna 105Kg (231lbs) TEMPERATURE 20 C to +60 C ( 4 F to 140 F) Transport: 40 C to +70 C ( 40 F to 158 F) WINDSPEED 21 m/s (47 mph) Degraded 28 m/s (63 mph) Survival: 50 m/s (112 mph) Humidity 0 to 100% RH 1.8M NEWSWIFT FREQUENCY Tx 5.85 to 6.65 GHz Rx 3.4 to 4.2 GHz (option Tx to GHz) Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx 27.5 to 30.0 GHz Rx 18.2 to 20.2 GHz (option Tx 30 to 31 GHz, Rx 20.2 to 21.2 GHz) GAIN Tx 39.6 dbi 6.25 GHz Rx 35.6 dbi 3.95 GHz Tx 41.9 dbi 8.15 GHz Rx 41.1 dbi 7.4 GHz Tx 46.8 dbi GHz Rx 44.7 dbi 11.2 GHz Tx 48.7 dbi GHz Rx 44.7 dbi 11.2 GHz Tx 52.9 dbi GHz Rx 49.6 dbi 19.7 GHz G/T 3.95 GHz = 15.0 dbk (Assumes LNB 60 db Gain 0.5 db NF) 7.40 GHz = 18.8 dbk (Assumes LNA 50 db Gain 0.8 db NF) GHz = 23 dbk (Assumes LNB 60 db gain 0.7 db NF) GHz = 23.0 dbk (Assumes LNB 60 db Gain 0.7 db NF) GHz = 25.6 dbk (Assumes LNB 55 db Gain 1.6 db NF) CROSS POLARISATION ISOLATION C Band Linear 30 db Tx/Rx X Band Circular 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear 35 db Ka Band Consult factory (all relative to copolar gain within 1 db contour) PORT TO PORT ISOLATION Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WEIGHTS Antenna115Kg (253lbs) TEMPERATURE 20 C to +60 C( 4 F to 140 F) Transport: 40 C to +70 C ( 40 F to 158 F) WINDSPEED 17 m/s (38 mph) Degraded 23 m/s (52 mph) Survival: 40 m/s (90 mph) HUMIDITY 0 to 100% RH sales@vislink.com 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 06/14 RD Rev 1

16 PRODUCT DATASHEET NewSwift HD Motorised Antenna OVERVIEW The NewSwift HD design allows for up to two 400 watt phase combined HPA s or two 750 watt HPA s in a redundant configuration. Allows for integration of two 5000 series upconverters and APS5000 (Protection Switch) within the NewSwift HD new aero-dynamic enclosure. The HPA s are as close as possible to the feed, thereby minimising the waveguide loss and maximising the available EIRP. The fully weatherproof RF equipment is further protected from the weather by a removable cover thus ensuring reliable operation whatever the environmental conditions. The entire aero-dynamic enclosure housing the RF equipment rotates with the azimuth axis eliminating the need for an expensive and lossy waveguide rotary joint. FEATURES Available with 1.5m or 1.8m reflector Bands available via feed cartridge exchange 1.5m - C, X, Ku, DBS & Ka 1.8m - C, X, Ku, DBS & Ka Full 3 axis control includes 360 azimuth range GPS based auto satellite acquisition package available Integral Satellite Database which automatically provides Antenna Pointing Data Tracking option with beacon receiver Full remote control Eutelsat, Intelsat and Arabsat compliant All models are approved for use with the majority of Satellite Providers Type - offset fed Configuration - prime focus Mount - elevation over azimuth Software upgradable to auto-acquire (ACU5216) and integral ASI Demod Option for multi-band capability by cartridge exchange Available in any custom colour scheme High performance compact integrated solution sales@vislink.com

17 SPECIFICATIONS GENERAL Meets The Requirements of ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT EESS-502 MIL STD A STANAG 4484 (as applicable) ANTENNA POSITION CONTROL Linear Polarisation: Full 3 axis motor control with manual override mechanism Circular Polarisation: Full 2 axis motor control with manual override mechanism Azimuth Adjustment 360 Elevation Adjustment 6 to 91 Polarisation Adjustment Linear: +/- 90 Circular: None ANTENNA CONTROL UNIT Compact half width rack unit Serial remote interface One touch stow & deploy Fast / med / slow motor drive system Simultaneous positional feedback of Az / El / Pol axis with true elevation reading from calibrated inclinometer OPTIONS GPS based auto-acquire upgrade package Rotary joint for azimuth axis Co-polar receive facility for Ku Band HUMIDITY 0 to 100% RH 1.5M NEWSWIFT FREQUENCY Tx 5.85 to 6.65 GHz Rx 3.4 to 4.2 GHz (option Tx to GHz) Rx 4.5 to 4.8 GHz) Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx 27.5 to 30.0 GHz Rx 18.2 to 20.2 GHz (option Tx 30 to 31 GHz, Rx 20.2 to 21.2 GHz) GAIN Tx 38 dbi 6.25 GHz Rx 34 dbi 3.95 GHz Tx 40.3 dbi 8.15 GHz Rx 39.5 dbi 7.4 GHz Tx 45.2 dbi GHz Rx 43.1 dbi 11.2 GHz Tx 51.3 dbi GHz Rx 48 dbi 19.7 GHz G/T 3.95 GHz = 13.5 dbk (assumes LNB 60 db Gain 0.5 db NF) 7.40 GHz = 17.3 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 21.4 dbk (assumes LNB 60 db gain 0.7 db NF) GHz = 21.4 dbk (assumes LNB 60 db Gain 0.7 db NF) GHz = 24.0 dbk (assumes LNB 55 db Gain 1.6 db NF) CROSS POLARISATION ISOLATION C Band Linear: -30 db Tx/Rx C and X Band Circular: 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear -35 db Ka Band Consult factory (all relative to co-polar gain within 1 db contour) PORT TO PORT ISOLATION Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WINDSPEED 21 m/s (47 mph) Degraded: 28 m/s (63 mph) Survival: 50 m/s (112 mph) STOWED DIMENSIONS 210cm l x 150cm w x 56cm h [82.7" x 59" x 22"] TEMPERATURE -20 C to +60 C [-4 F to 140 F] Transport: -40 C to +70 C [-40 F to 158 F] 1.8M NEWSWIFT FREQUENCY Tx 5.85 to 6.65 GHz Rx 3.4 to 4.2 GHz (option Tx to GHz, Rx 4.5 to 4.8 GHz) Rx 4.5 to 4.8 GHz Tx 7.9 to 8.4 GHz Rx 7.25 to 7.75 GHz Tx to 14.5 GHz (option from GHz) Rx to GHz Tx 17.3 to 18.1 GHz (option to 18.4 GHz) Rx to GHz Tx 27.5 to 30.0 GHz Rx 18.2 to 20.2 GHz (option Tx 30.0 to 31.0 GHz, Rx 20.2 to 21.2 GHz) GAIN Tx 39.6 dbi 6.25 GHz Rx 35.6 dbi 3.95 GHz Tx 41.9 dbi 8.15 GHz Rx 41.1 dbi 7.4 GHz Tx 46.8 dbi GHz Rx 44.7 dbi 11.2 GHz Tx 48.7 dbi GHz Rx 44.7 dbi 11.2 GHz Tx 52.9 dbi GHz Rx 49.6 dbi 19.7 GHz G/T 3.95 GHz = 15.0 dbk (assumes LNB 60 db gain 0.5 db NF) 7.40 GHz = 18.8 dbk (assumes LNA 50 db Gain 0.8 db NF) GHz = 23.0 dbk (assumes LNB 60 db gain 0.7 db NF) GHz = 23.0 dbk (assumes LNB 60 db Gain 0.7 db NF) GHz = 25.6 dbk (assumes LNB 55 db Gain 1.6 db NF) CROSS POLARISATION ISOLATION C Band Linear -30 db Tx / Rx C and X Band Circular 30 db Tx (axial ratio 1.07) 20 db Rx (axial ratio 1.22) Ku and DBS Band Linear -35 db Ka Band Consult factory (all relative to co-polar gain within 1 db contour) PORT TO PORT ISOLATION Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 20 db (100 db incl filter) Rx / Tx 20 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 40 db (110 db incl filter) Rx / Tx 30 db Tx / Rx 35 db (110 db incl filter) Rx / Tx 35 db WINDSPEED 17 m/s (38 mph) Degraded: 23 m/s (52 mph) Survival: 40 m/s (90 mph) STOWED DIMENSIONS 240cm l x 180cm w x 61cm h [94.5" x 70.9" x 24"] TEMPERATURE -20 C to +60 C [-4 F to 140 F] Transport: -40 C to +70 C [-40 F to 158 F] sales@vislink.com 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 08/09 RD Rev 1

18 PRODUCT DATASHEET NewSwift LT 120 Ku Band Motorised Antenna OVERVIEW The NewSwift LT antenna is a highly compact integrated satellite terminal with a Carbon Fibre reflector designed for rapid deployment. The NewSwift LT design allows for two HPAs, redundancy switching and two upconverters to be integrated into the antenna assembly close to the feed, thereby minimising the waveguide loss and maximising the available EIRP. The fully weatherproof RF equipment is further protected from the weather by a removable cover thus ensuring reliable operation whatever the environmental conditions. FEATURES Available with 1.2 meter Carbon Fibre reflector Full 3 axis control includes 360 azimuth range GPS based auto satellite acquisition packages available 800 City database controller Tracking option with beacon receiver Full remote control Approved for use with the majority of Satellite Providers Type - offset fed Configuration - prime focus Mount - elevation over azimuth Software upgradeable to auto acquire (ACU5216) with integral ASI Demod and for Eutelsat approved Auto- Point capability Available in custom colour schemes High performance, cost effective, compact integrated solution sales@vislink.com

19 SPECIFICATIONS GENERAL Meets The Requirements of ITU-R S ITU-R S INTELSAT IESS-601 EUTELSAT EESS-502 MIL STD A STANAG 4484 (as applicable) ANTENNA POSITION CONTROL Linear Polarisation: Full 3 axis motor control with manual override mechanism Azimuth Adjustment 360 Elevation Adjustment 6 to 91 Polarisation Adjustment +/ 90 ANTENNA CONTROL UNIT Compact half width rack unit Serial remote interface One touch stow & deploy Fast / med / slow motor drive system Simultaneous positional feedback of Az / El / Pol axis with true elevation reading from calibrated inclinometer OPTIONS GPS based auto-acquire upgrade package Rotary joint for azimuth axis Numerous install kits for 3rd party BUCs / HPAs Simultaneous H / V reception (3-Port) FREQUENCY (Reflector diameter 120cm) Tx: to 14.5 GHz (option from GHz) Rx: to GHz GAIN Tx: 43.3 dbi GHz Rx: 41.2 dbi 11.2 GHz G/T GHz = 19.4 dbk (assumes LNB 60dB gain 0.7dB NF) CROSS POLARISATION ISOLATION Boresight. >35 db Within 1dB contour >32 db PORT TO PORT ISOLATION Tx/Rx 40dB (110 db incl filter) Rx / Tx 30 db WEIGHTS Antenna 98 Kg (215 lbs) TEMPERATURE 20 C to +60 C ( 4 F to 140 F) Transport: 40 C to +70 C (-40 F to 158 F) WINDSPEED 21 m/s (47 mph) Degraded 28 m/s (63 mph) Survival: 50 m/s (112 mph) HUMIDITY 0 to 100% RH Two HPAs located within the antenna assembly sales@vislink.com 2014 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 06/14 RD Rev 1

20 NewSwift HD 2.4m Motorised Antenna The Advent NewSwfit HD 2.4m antenna is the latest addition to the present NewSwift range. The light weight roof mounted drive away antenna is designed to meet the highest standards of reliability and functionality for today s broadcast and military market. The carbon fibre reflector is available as a three piece reflector with the ability to be mounted on a wide range of SNG and military mobile hub vehicles. All three motorised axis work simultaneously to allow rapid on air time of less than five minutes. Power amplifiers and electronics are protected in the removable weatherproof housing mounted close to the feed to minimise waveguide loss. BENEFITS Reflector available in a 3 piece motorised configuration Tracking option with beacon receiver Designed to work with the ACU5000 series antenna controller High Performance Compact Integrated Solution Available in any colour scheme Key Features Less than 5 minutes to deploy Interchangeable C, X, Ka, and Ku Band feed cartridge Full 3 axis simultaneous motorisation Eutelsat, Intelsat and Arabsat compliant GPS based auto satellite acquisition option Typical Applications Newsgathering Event Coverage Sports Coverage Secure SATCOM

21 SPECIFICATIONS COMMON POWER REQUIREMENT V AC (supplied with external half rack width PSU) ENVIRONMENTAL Operating Temperature: -30 C to +60 C Transport Temperature: -40 C to +70 C Humidity: 0-100% Operating Wind Speed: 75Kmph Degraded Wind Speed: 100Kmph Deployed Survival Wind Speed 115Kmph Stowed Survival Wind Speed 180Kmph PHYSICAL Elevation Adjustment: 6 to 95 Azimuth Adjustment: +/- 180 Polarisation Adjustment: linear +/- 90, circular none Platform Mount: Elevation over Azimuth Configuration: Prime Focus Feed Type: Offset Stowed Dimension: Length: 3150mm Width: 1675mm Height: 660mm : 220kg ITAR Status: ITAR Free C-BAND X-BAND KU-BAND KA-BAND FREQUENCY Tx Frequency Band (CP) GHz Rx Frequency Band (CP) GHz Tx Frequency Band (LP) GHz Rx Frequency Band (LP) GHz GAIN TX Gain 42.1 dbi G/T 3.8GHz 16.3 db/k POLARISATION Polarisation Tx RHCP or LHCP configurable Rx Orthogonal to Tx Linear (Option) Axial Ratio (CP) <1.3dB (Tx) Cross Polar isolation <27 db STANDARDS MIL-STD A EUTELSAT EESS-02 ITU-R S and S FCC FREQUENCY Tx Frequency Band GHz Rx Frequency Band GHz GAIN TX Gain 43.6 dbi G/T 7.5GHz 22.5 db/k POLARISATION Polarisation Tx RHCP or LHCP configurable Rx Orthogonal to Tx Axial Ratio <2dB (Tx), <1.21dB (Rx) STANDARDS MIL-STD A FREQUENCY Tx Frequency Band GHz Rx Frequency Bands (GHz) GAIN TX Gain 48.8 dbi G/T 11.7GHz 26.0 db/k POLARISATION Polarisation Linear H/V Tx orthogonal to Rx Cross polar isolation 35dB STANDARDS ITU-R S and S FCC with INTELSAT IESS-601 EUTELSAT EESS-502, ETSI EN FREQUENCY Tx Frequency Band GHz (Option GHz) Rx Frequency Band GHz (Option 18.2GHz 20.2GHz) GAIN TX Gain 55.5 dbi G/T 20.7GHz 28.8 db/k POLARISATION Polarisation Tx RHCP or LHCP configurable Rx Orthogonal to Tx Linear (Option) Axial Ratio <1.0dB (Tx), 1.5dB (Rx)dB STANDARDS MIL-STD A EUTELSAT EESS-02 ITU-R S and S FCC sales@vislink.com 14/10/15 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

22 AUC5000 & APS5000 Block Upconverter & Protection Switch Vislink's established lightweight, compact, 1U half rack electronics packages are ideally suited for flyaway or vehicle mounted solutions, where weight and space are at a premium. The 5000 series of electronics can be packaged in different lightweight, ruggedised canvas flight cases, depending on units selected and system configuration. The APS5000 is a compact ½ rack width 1RU SHF Protection Switch covering C through to DBS TX Bands. The APS5000 is typically, but not exclusively, used with a pair of AUC58xx Advent BUCs to provide 1:1 protection. This is normally under control from a ASC5000 System Controller although the APS can function "stand-alone". Key Features AUC5800 The AUC5800 is a high performance block upconverter with the input at L Band and output versions for C, X, Ku, DBS and Ka Bands Internal / External reference High / Low gain options High stability Optional second SHF output for redundancy HPA control data pass-through 19 1U HD SHF solution available with DVE5000 series and ADM5000 Weather resistant for outdoor use Key Features APS5000 Provides hot-standby switching of a pair of SHF output signals from AUC5800, or other Block Upconverters Integral Phase Shifter for Phase Combined applications Forward power monitor Status inputs from BUCs and HPAs M&C link to ASC5000

23 ACU5000 Antenna Control Unit Compact, lightweight 1/2 width rack units 5000 Series Overview Advent s established lightweight, compact, 1U half rack electronics packages are ideally suited for flyaway or vehicle mounted solutions, where weight and space are at a premium. The 5000 series of electronics can be packaged in different lightweight, ruggedised canvas flight cases, depending on units selected and system configuration. Compact 1/2 width 19 x 1U rack mountable units 1/4 of the size and 1/6th of the weight of competitors equivalent products Designed for contribution flyaway and DSNG vehicle applications where space and weight are critical Full range of units available; ƌƌ SD and HD Digital Video Exciter ƌƌ IP Modem ƌƌ Multiplexer Router ƌƌ BUCS ƌƌ Antenna and Drive Control units ƌƌ System IRD / Redundancy controllers ƌƌ Protection Switches ƌƌ L Band over fibre modems All units field upgradeable All units have integral web browser facility (where applicable) for RC&M applications A comprehensive range of flight case solutions for 1/2 rack and 19 rack units to suit system configuration, i.e. 3U, 4U, 5U All units can also be fixed together and mounted in a standard 19 flight case or rack within a vehicle Features The ACU5000 is an antenna control unit designed to operate with VISLINK s range of motorised antenna systems The unit provides user friendly 3 speed motor control of azimuth, elevation and polarisation axis as well as automatic stow and deploy functions The ACU5000 comes with the option of interfacing with a GPS receiver and/or fluxgate compass Integrated beacon receiver option provides facilities for automatic satellite acquisition and tracking The ACU provides an 800 city updateable database to enable satellite pointing without the need for GPS Optional DVB-S/S2 demodulation capability to provide ASI output Satellite identification capability External reference signal for LNB VISLINK News and Entertainment

24 SPECIFICATIONS AUC5000 FREQUENCY RANGE Input Frequency Range 950 to 1750 MHz Output Frequency Range C Band AUC to 6.65 GHz to GHz X Band AUC to 8.4 GHz Ku Band AUC5813 / to GHz to 14.5 GHz 14.0 to 14.5 GHz DBS Band AUC5817 / to 18.1 GHz 17.6 to 18.4 GHz Ka Band AUC5827 / 28 / 29 / to 31.0 (Specify 700 MHz Max Tx subband) Others Any 800 MHz to order SHF 50 Ω N female (Ka band 2.9mm connector) L Band 50 Ω N female HPA Control / Status / DC Input Weatherproof multi-pin FREQUENCY REFERENCE Internal Frequency Accuracy +/- 100 Hz from nominal at 25C (+/- 80 Hz typically) Internal Frequency Stability 2 x 10-8 Rack External Reference (Internal link selectable) User supplied via L Band cable 10 0 dbm +/- 3 db GAIN Input Power Level -10 dbm nominal, 0 dbm max Output Power Level -5 dbm min at 1 db compression point (+10 dbm to +35 db with high gain option) Gain -5 dbm to +20 db nominal internally adjustable (+10 dbm to +35 db high gain option) Gain Variation +/ db any 36 MHz +/- 1.5 db over 800 MHz +/ db over 24 constant temperature Group Delay Variation +/ ns in any 4 MHz SSB Phase Noise Better than 6 db below IESS308 VSWR Input Return Loss Ω Output Return Loss Ω SPURIOUS Modulated -60 dbc Unmodulated -65 dbm Harmonics -20 dbc HPA CONTROLLER Pass-through and protocol transfer of HPA control data from L Band input to RS485 HPA control output - Xicom, CPI, e2v, Paradise supported, others to order ENVIRONMENTAL & PHYSICAL Temperature -20 C to +60 C(4 F to 140 F) Storage: -20 C to +80 C(-4 F to 176 F) Size 210mm wide x 350mm deep (8.27 inches wide x inches deep) 1U half rack width 2 Kg (4.4lbs) Power Phantom from L Band or 18V DC / 1A Connectors SHF 50 Ω N female (Ka band 2.9mm connector) L Band 50 Ω N female HPA Control / Status / DC Input Weatherproof multi-pin APS5000 SWITCH DRIVES Internal coaxial switch Two switch drives for external switches REMOTE CONTROL RS baud RF Input / output frequency range: 4-18GHz Input loss... 4 db db nominal Input level dbm max Input/output return loss db at 50 Ω CONNECTIONS RF Inputs Female N-type 50 Ω RS485 comms Switch drives Status inputs POWER 18Vdc from AUC5800 or via external Vdc SUPPLY ENVIRONMENTAL & PHYSICAL Operational Temperature: 0 C to +50 C (32 F to 122 F) Storage Temperature 20 C to +70 C ( 4 F to 158 F) Size 210mm wide x 350mm deep (8.27 inches wide x inches deep) 1U half rack width 1.2 Kg (2.6lbs) Frequency 47 to 63 <50W Operating Voltage Vac +/- 10% sales@vislink.com 12/14 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

25 Specifications The ACU5000 series antenna control units are designed to operate with the complete range of Advent motorised antenna systems, using the 3000, 4000 and 5000 series Drive Control Units (DCU). The ACU5000 provides a user friendly interface enabling the control of azimuth, elevation and polarisation for the deployment and operation of the motorised antenna system. The ACU has embedded software to be able to calculate the position of a satellite from the current location and orientation of the uplink system. The location and orientation can also be entered manually. If the beacon receiver option is included, the ACU can search, peak and track the satellite beacon signal. Tracking is maintained using a differential slope track algorithm. From the detailed characteristics of the beam pattern stored within the controller the ACU can optimise the antenna pointing with the minimum of movement during the tracking process. Satellites containing commercial traffic can be positively identified by their Satellite ID, in addition to comparison of the beacon frequency. This ensures the correct satellite has been acquired without the need for a spectrum analyser or receiver. An optional ASI output is available to feed an external decoder. FRONT PANEL INDICATIONS Clear LCD shows information on the current status of the antenna, beacon receiver and DVB parameters FRONT PANEL CONTROLS Start Starts an antenna system activity Stop Stops any current antenna system activity Rate Changes the current movement rate Pol Pol Controls the polarisation axis movement,,, Controls the azimuth and elevation axis movement functions. In the menu mode, used to navigate and select options Menu Steps through key menu options Enter, Escape Used to select menu options and escape from current selections POSITIONAL DISPLAY ACCURACY Azimuth, elevation and polarisation +/ ANGULAR CONTROL RATES Fast up to 5 /s (antenna type dependent) Medium 0.5 /s Slow 0.1 /s ANGULAR CONTROL STEPS All antenna types Fast 1.0 Medium 0.5 Slow 0.1 RF INPUT MHz Beacon level -90 db min DVB Input -20 to -65 dbm LNB power switchable 1A LNB reference 10 MHz RF Monitor loop-thro REMOTE CONTROL RJ45 10/100 base-t RS232/ baud Ethernet / Web Interface / SNMP WEB BROWSER Supporting Internet Explorer 7 & 8, Firefox, Safari and Opera MODEL NOS ACU5012 Antenna control unit with manual motor control ACU5214 Antenna control unit with auto-point capability. Includes compass and GPS antenna ACU5216 Antenna control unit with auto-acquire capability. Utilises internal Beacon Receiver and includes compass and GPS antenna ACU5xxxD D suffix indicates enabling of the integral DVB-S/S2 demodulator ENVIRONMENTAL & PHYSICAL Temperature... 0 C to +50C (32 F to 122 F) Storage: C to +80 C (4 F to 176 F) Size 210mm wide x 350mm deep (8.27 inches wide x inches deep) 1U half rack width 2 Kg (4.4lbs) POWER Operating Voltage Vac Power Consumption <100 VA The ACU5000 provides the ability to recall one of up to 100 stored satellite presets and additional software providing up to 800 city information database enabling the controller to find the satellite without the need of GPS. Half rack flight case, housing three 5000 series units. Flight cases are available in a variety of options to suit the application Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. 4/1/2010

26 ADM5100 Satellite MESH Modem The ADM5100 SKYWAN 5G is a collaboration between Vislink and ND SatCom. Ideal for use with a range of Vislink SATCOM systems, it is a MF-TDMA modem with unique ONE hardware concept. Each unit can act as a traffic HUB or Master Station or both, therefore adding agility in terms of its network role. No matter if you require a star, multi star, hybrid or full mesh network, the unique hardware design of SKYWAN 5G reliably fits all existing topologies within the VSAT world. Key Features Compact lightweight MESH network modem Capable of star, multi star, hybrid or full mesh network BPSK-16APSK (24 MODCODs) for TDMA Typical Applications Event Coverage Newsgathering Sports Coverage Secure SATCOM TDMA mod/demod up to 12Msps/20Mbps

27 SPECIFICATIONS VSAT NETWORK PARAMETERS Network Topology Star Multi-Star Hybrid True Fukk Mesh Type & Number of Demodulators 1x MF-TDMA modulator 1x TDMA demodulator (home channel) 1x DVB-S2 receiver (ETSI) Access Type TDMA MF-TDMA for all direction communication with fast frequency hopping in Tx and fixed Rx home channel Encoding for TDMA Turbo Access Scheme Bandwidth-on-Demand / real-time / non-real-time / guaranteed throughput / QoS classes Stacking Cascading of multi (max 4) units to one stack (with prime controller) for ad. TDMA demods on each node FEC Code Rates TDMA BPSK: 1/3, 2/5, 4/9, 1/2 & 2/3 QPSK: 1/3, 2/5, 4/9, 1/2, 3/4, 4/5, 5/6 & 6/7 8PSK: 2/3, 3/4, 4/5, 5/6 & 6/7 16APSK: 2/3, 3/4, 4/5, 5/6 & 6/7 Es/No (BER 10-7, incl. margin) TDMA from 0,6dB (QPSK 2/5) 9,5dB (16APSK 6/7) TDM-DVB-S from 1dB (QPSK 1/2) 18,2dB (32APSK 9/10) Channel Spacing/Roll-off TDMA 1.1, 1.2, 1.4 / 0.1, 0.2, 0.4 Modem Symbolrate TDMA Tx/ Rx 200 KBaud 12 MBaud, variable in 1 KBaud increments User Data Rate TDMA Up to 20 Mbit/s in each direction on LAN port / carrier user data rate starting ~64kbps, slot assigned traffic starting ~4kbps Modem Symbolrate TDM/DVB-S2 Up to 45 MBaud (in-build receiver) User Data Rate TDM/DVB-S2 Up to 160Mbps per DVB channel Rx: Up to 55-60Mbps IP traffic on LAN port (dep avg packet length) VSAT Data Throughput Switching packet rate TDMA and LAN switch up to pps, DVB-S2 receiver up to pps INTERFACES LAN Interface Four 10/100/1000 Base-T Ethernet RJ-45 ports, independent and individual configurable interfaces Enhanced Features IPv4/v6 / Static Routing / OSPF / BGP/ Load Balancing / TCP / TCP-Acceleration / UDP / IGMP /Robust Header Compression RoHC / Multi VRF support (up to 8 groups) and VLAN / GRE / MPLS support/ Traffic Filtering and Shaping for QoS based on configurable PHB rules (up to 14 classes per VRF) / DiffServ / DHCP / NAT/PAT* Serial RS232/Console SUB DB-9S socket for management access via command line interface Aux-Port 8 pin connector DIN contains Rx lock signal (5 VDC) indicator and Tx inhibit with cable detect support Display and 5-button switch Notification of status information (reception level, IP-adr. etc.) USB-A 2.0 ports Front panel port for image updates and configuration loads, rear port for WLAN, UMTS/LTE projects (opt.) Tx Modulator Port F-connector (75Ohm female) L-Band MHz / dbm ( -43dBm for dynamic range) Rx Demodulator Port F- connector (75Ohm female) L-Band MHz / dbm common used Rx port for DVB-S2 and TDMA receiver ODU SUPPORT 10 MHz reference signal Configurable by software on Tx and Rx port LNB Software configurable 0/13/18VDC support, 22kHz signal internal/external PLL BUC Software enabled internal 24VDC support, up to 85W on IDU F-connector (typical 6-8W K u) Others Radios with L-Band interface Ka, Ku, Ext Ku, C NETWORK MANAGEMENT NMS Platform SKYWAN 5G NMS virtual appliance (virtual host not provided) NMS Architecture Web based application, central NMS sever, can be placed everywhere (only IP connectivity needed) mainly for planning & configuration, network runs without NMS always on or connected IDU Management Interfaces Remote access with in-band management (from central NMS station over satellite), additional SNMP access for monitoring, Local access via WEB-GUI and CLI or integrated console port (RS232) ENVIROMENTAL, PHYSICAL & POWER Temperature 0 C to +50C (32 F to 122 F) Storage: 20 C to +80 C (4 F to 176 F) Size 210mm wide x 350mm deep (8.27 inches wide x inches deep) 1U half rack width 2 Kg (4.4lbs) Power Operating Voltage Vac Power Consumption <100 VA sales@vislink.com 03/15 ENG 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

28 NewStream Multi-mode Van/OB Transmit System NewStream raises the bar as the most comprehensive mobile broadcast microwave transmission system available today. It combines both licensed and unlicensed RF technologies together, all within an operator-friendly platform. The NewStream IDU (Indoor Unit) offers a unique type of multi-mode operation which can include ENG (Electronic News Gathering), SNG (Satellite News Gathering) and CNG (Cellular News Gathering) in a space efficient 2-RU (3 ½") by 19" EIA rack-mount chassis. The system includes both MPEG-2 and H.264 AVC (MPEG-4) HD/SD video/ audio encoding for ENG and SNG applications and for CNG operations, H.264 ABR (adaptive bit rate) coding to compensate for the dynamic signal fluctuations commonly associated in cellular network infrastructures. NewStream s IDU employs advanced programmable OLED (organic light-emitting diode) push button switches which automatically configure themselves based upon the user s desired mode of operation. The use of OLED smart switches significantly reduces front panel congestion by repurposing otherwise dedicated switches for different operating modes. In addition, they can also provide a color or graphic change-of-status indication in the same switch. For ENG applications, NewStream includes an all-inclusive mast-mounted ODU (Outdoor Unit) providing 2 GHz or 2 & 7 GHz ultra-linear high RF power output digital amplifiers. It interconnects with the IDU via coaxial or triaxial cable and contains an ancillary RF coax relay to switch between a high-gain directional or optional Omni-directional antenna. For CNG operations the IDU communicates with a separate cellular ODU that is either roof-top or mast-mounted by means of a MoCa Power over Ethernet (PoE) bridge connection utilizing any standard RG-58 or RG-59 coaxial cable, typically found in most legacy Nycoil assemblies. Mast-mounting the cellular ODU potentially increases broadband cellular connectivity that could be weakened in more congested roof-top mounted installations. Multiple cellular modems inside the ODU are bonded together for the seamless transmission of high quality HD (highdefinition) video over 3G/4G LTE network service providers such as Verizon, AT&T and T-Mobile. For SNG applications the NewStream IDU provides control of a fully featured integrated satellite upconverter with L-band output, DVB-S and DVB-S2 modulation. THE NEWSTREAM ADVANTAGE: Cost effective, space saving and user-friendly multi-purpose Van/ OB microwave transmission system. Compact: Space-efficient 2RU x 19" EIA all-inclusive rack mount design for ENG, CNG and SNG control. Operator-friendly: Ergonomic programmable multifunction OLED push button switches minimize front panel controller congestion. Backwards Compatibility: Use existing ENG Nycoil Assemblies configured for Type N, Triax connections. Expandable: Purchase a NewStream system initially configured for ENG operation and then add CNG and/or SNG functionality at a later time. Space Efficient ENG ODU: 2, 4, 7, 13, 2/7 GHz mastmounted single enclosure with built-in RF coaxial relay for omni-directional antenna selection. Broadband Cellular ODU: Lightweight mast or roofmounted cellular ODU equipped with multiple bonded cellular modems and integral high-gain broadband cellular antennas. HD/SD Broadcast Video Quality: User selectable MPEG-2 or H.264 (AVC) encoding available in 4:2:0 and 4:2:2 profiles. CNG Encoding: H.264 AVC level 4.1 adaptive bit-rate coding (ABR) encoding. SNG: DVB-S and DVB-S2 modulation with optional 10 MHz. Video Inputs: Composite video & HD/SD-SDI. Audio: Two embedded SDI MPEG-2 layer II and two Analog stereo pairs. Future-proof: NewStream is based upon a software defined platform employing high capacity dual-core ARM Cortex-A9 FPGAs (field-programmable gate arrays) which allow for the future implementation of emerging communication technologies. Key Features Operator-friendly OLED switches Backwards Compatibility Industry-First Cellular ODU Future-Proof Space Efficient 2 rack Unit Typical Applications Electronic Newsgathering Satellite Newsgathering Cellular Newsgathering

29 SPECIFICATIONS ENG CELLULAR SNG OUTDOOR UNIT (ODU)-RF Mast-mounted (single enclosure) Mast-mounted (single enclosure) Optional: Roof-mounted NewSwift, Mantis GHz 8 Watts (typ.) +/- QPSK, 64 QAM N/A N/A , , GHz 5 Watts (typ.) +/- QPSK, 64 QAM N/A N/A GHz 1.5 Watts (typ.) +/- 0.5 QPSK N/A N/A CDMA, UMTS, HSPA+, LTE N/A 6-modems, Bonded N/A IDU to ODU interconnection RG-6/U minimum or better RG-58/U or RG-59/U LMR-400 or equivalent Size and, ODU 7" w x 10" l x 6" h 16 lbs. 2/7 GHz) 10" w x 14" l x 5" h 10 lbs. Temperature -20º to +50ºC -20º to +50º C TBD TBD INDOOR UNIT (IDU) Operator Controls Displays Presets Rear panel I/O Size and, IDU Prime operating power Temperature Rack-mount chassis, single (5) Programmable OLED (organic light-emitting diode) push-button switches, (2) rocker-style switches, (3) LED push-button switches, (1) On/Off push-button switch (1) Capacitive color touch TFT 5.0" diagonal 800 x 480 white LED backlight display, (2) 16 x 2 segment mono-chromatic blue OLEDs 3 Operating Modes-Interview, Standard, Up to 99 User configurable Up to 99 User configurable Mobility BNC - (ASI In, ASI Out, SDI In, CV in, 75 Ω audio, spare) Weidmuller - (analog audio 1L/1R, 2L/2R, digital audio D1, D2, MW ODU power, Ant.) Type N or Triax (ODU 2/7 GHz or 2 GHz and 7 GHz legacy MTX ODUs) Type N - (L-band Mod. & L-band Mon.); TNC - (to cellular ODU) Miscellaneous- (1) SMA Wi-Fi, (3) RJ45 Ethernet, (1) 115 VAC IEC C14, (1) DB-9 data, (1) USB 17.0" W x 16.2" L x 3.5" H (2RUx 19" EIA standard rack-mount), 16 lbs/.45 kg 115/230 VAC, 2.0 A (typ) -10º to +40º C MODULATION COFDM (DVB-T) OFDMA, CDMA DVB-S QPSK, DVB-S2 QPSK Optional Modulations LMS-T 10/20 N/A DVB-S2 8PSK, 16/32 APSK VIDEO INPUT FORMATS HD/SD-SDI HD/SD-SDI HD/SD-SDI VIDEO RESOLUTIONS HD & SD HD & SD HD & SD High Definition 1080i, 1080p, 720p 1080i, 1080p, 720p 1080i, 1080p, 720p Standard Definition 720 x 480i (NTSC), 720 x 576i (PAL) 720 x 480i (NTSC), 720 x 576i (PAL) 720 x 480i (NTSC), 720 x 576i (PAL) VIDEO ENCODING PROFILE MPEG-2, H.264 HD/SD, 4:2:2/4:2:0 H.264 AVC HD/SD 4:2:0 High Level 4.1 MPEG-2, H.264 HD/SD, 4:2:2/4:2:0 HD Encoding 4:2:2 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps HD Encoding 4:2:0 (MPEG-2) 8.0 to 30 Mbps N/A 8.0 to 80 Mbps SD Encoding 4:2:2 (MPEG-2) 2.0 to 50 Mbps N/A 2.0 to 50 Mbps SD Encoding 4:2:0 (MPEG-2) 1.5 to 15 Mbps N/A 1.5 to 15 Mbps HD Encoding 4:2:2 (H.264) 1.5 to 20 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps HD Encoding 4:2:0 (H.264) 1.5 to 20 Mbps 128 Kbps to 10 Mbps 1.5 to 20 Mbps SD Encoding 4:2:2 (H.264) 1.5 to 15 Mbps 750 Kbps to 10 Mbps 1.5 to 20 Mbps SD Encoding 4:2:0 (H.264) 1.5 to 15 Mbps 128 Kbps to 10 Mbps 1.5 to 15 Mbps AUDIO ENCODING 2- analog stereo/4-mono, AES/EBU (up to 4 pairs embedded in SDI) 1-analog stereo/2-mono, AES/EBU (AAC) (up to 2 pairs embedded in SDI) 2-analog stereo/4-mono, AES/ EBU (up to 2 pairs embedded in SDI) Audio Input (Analog) +8 dbm 600 Ω bal. +8 dbm 600 Ω bal. +8 dbm 600 Ω bal. 1 KHz TT <.1% to +18 dbm max..3% to +18 dbm max. <.1% to +18 dbm max. S/N (Signal to Noise) >66 db RMS >65 db RMS >66 db RMS Frequency Response KHz ± 1.0 db KHz ± 1.0 db KHz ± 1.0 db AES Input (digital) 1.0 V 75 Ω unbalanced N/A 1.0 V 75 Ω unbalanced sales@vislink.com 10/14 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

30 IRD5200 DVB-S2 Receiver with H.264 / MPEG2 Decoding The IRD5200 is the highest performing feature-rich SD/HD Contribution IRD available for lightweight SNG Flyaway or Terrestrial ENG receive applications. Utilising Vislink s core technologies the IRD5200 combines leading edge high order DVB-S2 demodulation with highly configurable FPGA circuitry providing an abundance of user selectable features all in one streamlined 19 x 1RU Half-Rack Width unit. This revolutionary concept for SNG /ENG and OB receive operations reduces the complexities and operating costs of today s economically challenged businesses. The 5200 IRD accepts up to two L band and one MHz RF input, in addition to two individual ASI inputs, RF signal inputs, providing reliable and comprehensive coverage for any SNG or ENG/OB receiving site. The integral demodulator can be configured for DVB-S QPSK and DVB-S2 schemes from QPSK through to 32APSK In addition, with the relevant software license, the IRD5200 will accept ASI over IP input (decapsulating an ASI video from an IP transport stream and can encapsulate up to two ASI videos into an IP stream for routing to an alternate destination for decoding. With the relevant license the integral decoder will decode MPEG2 SD/HD 4:2:0 and 4:2:2 video (including Vislink s ultra low delay encoding) in addition to H.264 4:2:0 SD/ HD and 4:2:2 10bit HD video. A powerful, yet simple to operate, web-based graphical user interface (GUI) provides complete remote control and monitoring for the receiver by means of an integrated Ethernet/SNMP (RJ45) interface. This can be operated by connecting the IRD to a laptop or other device where the control screen will function in most web browsers. This further reduces capital equipment expenditures by eliminating the need for expensive third party remote control systems. The IRD5200 is part of a complete suite of units aimed at high quality or versatile contribution links where live video or content is required to be routed back to base via Satellite, Microwave or IP connectivity. The range includes HD and SD Video Encoders, DVB-S, DVB-S2, DVB-T and LMS-T Modulators, IP Satellite Modems, Diversity Receivers, IRDs and associated units. All units utilise a 19 x1ru half rack width housing for compactness and extremely light weight. This packaging has proved its worth in the portable applications where these type of units are typically deployed. DVB-S2 Satcom and ENG IRD FEATURES 2 x L-band input with L-band loop-through monitor 1 x VHF/UHF* and 1 x ASI inputs ASI decapsulation from IP input* ASI encapsulation onto IP output* LNB/Downconverter powering L3025 Downconverter powering via VHF/UHF input DVB-S QPSK demodulation DVB-S2 QPSK, 8PSK, 16APSK & 32APSK demodulation* ASI Output BISS 1/E Descrambling, MPEG-2 4:2:0 & 4:2:2 SD generic and ultra low delay decoding (with Vislink Encoder) MPEG-2 4:2:0 & 4:2:2 HD generic and ultra low delay decoding* (with Vislink Encoder) H.264 4:2:0 Main Profile and High-profile SD and HD Decoding* H.264 4:2:2 8,9 & 10-bit High-profile SD & HD decoding* Web browser and SNMP control, SDI-HD/SD and CVBS outputs with embedding of up to 4 pairs of decoded audios Independent output of Audio Pairs #1 and #2 as analog audio or balanced AES on LEMO connector (XLR breakout lead supplied) Field upgradeable via USB Typical uses include: Lightweight Monitoring IRD for SNG applications Satcom Contribution or Cable-Head Receiver ENG Point-to-Point DVB-S2 Receiver using L3025 Downconverter (*) optional license key upgrade

31 SPECIFICATIONS DEMODULATOR: DVB-S QPSK DVB-S2 QPSK / 8PSK / 16APSK / 32APSK L Band Input Range MHz VHF/UHF input range MHz Symbol Rate Up to 45Msymbols DECODER: SD MPEG-2 4:2:0 & 4:2:2 HD MPEG2 4:2:0 & 4:2:2 Low delay MPEG-2, 4:2:0 & 4:2:2 H.264 4:2:0 MP, 8-bit H.264 4:2:2 HP, 8-bit H.264 4:2:2 HP, 10-bit Audio 4 pairs Audio MPEG-2 Layer 1 & 2, Descrambling: BISS-1 & E AES 128 & 256bit (future software upgrade) Inputs: 2 x L band RF inputs - F-Type(f). Switchable LNB power 1 x UHF inputs, MHz BNC(f). Switchable Downconverter power 1 x ASI input BNC(f) (ISO/ IEC bytes), 10/100/1000 Ethernet connection for Video-over-IP connections - RJ45 10/100 Ethernet connection for IP-based unit control RJ45 USB2 connector for code updates and profile transfers Outputs SDI-SD/HD/Composite Video BNC(f) ASI output BNC(f) (ISO/IEC bytes), L band Loopthrough BNC(f) Audio Pairs #1 and #2 (analog or AES) LEMO 4 x XLR3P breakout lead IRD5200 BASE CONFIGURATION Base Unit Part Number: x L band Inputs and 1 x L band loopthrough 2 x ASI inputs 1 x ASI output DVB-S QPSK Demodulation MHz MPEG2 SD 4:2:0 and 4:2:2 Generic and Vislink Low Delay Decoding Integral web browser control SDI-SD and CVBS Video outputs 2-pair audio decoding (with upgrade to 4-pair decoding when available) ENVIRONMENTAL & PHYSICAL Temperature Operational 0 C to +50 C (32 F to 122 F) Temperature Storage 20 C to +70 C ( 4 F to 158 F) Size 210mm wide x 350mm deep (8.27 wide x deep) 1U half rack width 1.5 Kg (3.5lbs) Power Frequency 47 to 63 <100W Operating Voltage 100 to 240 Vac +/ 10% Power IEC Input VAC ±10%, 47-63Hz <100W IRD5200 LICENSE KEY UPGRADES MHz input enable L9556 ASI over IP Encapsulation L9557 ASI over IP Decapsulation L9565 MPEG2 HD (Generic) upgrade L9564 MPEG2 HD (Ultra Low delay) upgrade L9560 H.264 4:2:0 MP & HP SD/HD Decoding L9561 H.264 4:2:2 10-bit HP SD/HD Decoding DVB-S2 QPSK/8PSK Upgrade DVB-S2 16APSK/32APSK Upgrade IRD5200 in AFC5003 Half Width Lightweight Flightcase with 5100 Exciter and AUC5814 BUC sales@vislink.com 06/14 ENG RD Rev Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

32 UltraCoder HEVC Encoder Being the lightest in the world, the Vislink UltraCoder is the new lightweight 1RU, ½ rack HEVC encoder from Vislink capable of encoding 4K UHD, HD & SD video. The system uses the latest advanced HEVC encoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. It has the ability to encode one 4K UHD video or up to 4 simultaneous HD video streams, making it the most advanced encoder in its range. Being so lightweight, it s ideal for flyaway or vehicle mounted applications, where weight and space is critical. Along with Vislink s UltraDecoder this product provides a complete end to end HEVC & 4K encode and decode solution. Key Features Capable of encoding 4K UHD, HD & SD video The product uses the latest advanced HEVC encoding techniques to offer 50% bit rate reduction compared to H.264 The ability to encode one 4K UHD channel or up to 4 simultaneous HD video streams User configurable SFP Video Interface The UltraCoder can be used with the UltraDecoder to provide a complete end to end encode and decode solution Typical Applications SNG ENG IP Networks

33 SPECIFICATIONS VIDEO PARAMETERS Video Encoder Profiles 4K UHD Main 10-8/10bits Main /10 bits / Mbps HD Main 10-8/10bits Mbps (per channel with maximum combined rate of 28 Mbps) Main /10 bits / Mbps (per channel with maximum combined rate of 28 Mbps) SD Main 0.5-6Mbps Main 2.0-6Mbps Video Inputs 2 SFP+ module slots supporting electrical and optical interfaces carrying: 4 x 3G-HDSDI (UHD) 4 x independent HDSDI Video Formats 480i / i / p / 50/ / i / 50/ / p / / 24 / 25 / / 30 / 50 / / p / / 24 / 25 / / 30 / 50 / / 60 IP VIDEO OUTPUT TRAFFIC INTERFACE Type: Protocol 10 / 100 / 1000 Base T IEEE802.3 Ethernet Ethernet Encapsulation for ASI RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP MultiCast FEC Pro MPEG Forum Code of Practice #3 release 2 (CoP3) / SMPTE AUDIO PARAMETERS Audio Encoder ISO (HE-AAC) 8 pairs Audio Inputs Embedded Audio pairs assignment examples Video Stream 1 Video Stream 2 Video Stream 3 Video Stream 4 Valid Invalid Example Audio Configurations for HD channels on one UltraCoder. The Audio pairs can be split across up to 4 Video streams or used on just one stream as shown above. Pairs must be used in even numbers (2,4,6 or 8) and odd pairs are invalid. * The UltraDecoder can only support 4 pairs of audio FLEXIBILITY Remote Control Ethernet HTTP SNMP Outputs IP ASI ENVIRONMENT & PHYSICAL Dimensions 210mm wide by 350mm deep (8.27 wide by deep) 1RU, ½ rack 1.9kg approx (4 lbs) Temperature 0 C to +50 C(32 F to 122 F) Storage: 20 C to +70 C ( 4 F to 158 F) Power <100VA 90 to 264 Vac 50/60 Hz LICENCES The following licences are available on the UltraCoder: Additional HD encoding (up to 3 licences) 4K UHD encoding sales@vislink.com RD Rev /01/16 ENG 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

34 UltraDecoder HEVC Decoder Being the lightest in the world, the Vislink UltraDecoder is the new 1RU, ½ rack HEVC & 4K UHD capable decoder. The Product uses the latest advanced HEVC decoding techniques to offer up to 50% bit rate reduction compared to H.264, resulting in the delivery of high quality video at low bit rates. Along with Vislink's UltraCoder this product provides a complete end to end HEVC & 4K UHD encode and decode solution. Key Features Capable of decoding 4K UHD, HD & SD video The product uses the latest advanced HEVC decoding techniques to offer 50% bit rate reduction compared to H.264 The ability to decode one 4K UHD or 1 HD video channel The UltraDecoder can be used with the UltraCoder to provide a complete end to end encode and decode solution Typical Applications SNG ENG IP Networks

35 SPECIFICATIONS VIDEO PARAMETERS Video Decoder Profiles 4K UHD Main 10-8/10bits 4.2.0,1.0-50Mbps HD Main 10-8/10bits Mbps SD Main 0.5-6Mbps Video Formats 480i / i / p / 50/ / i / 50/ / p / / 24 / 25 / / 30 / 50 / / p / / 24 / 25 / / 30 / 50 / / 60 IP INTERFACES VIDEO Type: 10 / 100 / 1000 Base T Ethernet Protocol IEEE802.3 Ethernet Encapsulation for ASI RTP (RFC2250), ARP, IPv4, IGMPv2/3, TCP/UDP MultiCast AUDIO PARAMETERS Audio Decoder ISO (HE-AAC) Audio Outputs Embedded 4 pairs in SDI Embedded 4 pairs in HDMI FLEXIBILITY Remote Control Ethernet HTTP SNMP Outputs HDMI 1.4 (UHD) Mini BNC (SD & HD) X 2 RJ45 (IP) BNC (ASI) ENVIRONMENT & PHYSICAL Dimensions 210mm wide by 350mm deep (8.27 wide by deep) 1RU, ½ rack 1.9kg approx (4 lbs) Temperature 0 C to +50 C(32 F to 122 F) Storage: 20 C to +70 C ( 4 F to 158 F) Power <100VA 90 to 264 Vac 50/60 Hz sales@vislink.com RD Rev 4 22/01/16 ENG 2015 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organisations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.

36 PHASE ENGENHARIA EXCLUSIVE REPRESENTATIVE:

37 PHASE Engenharia Ind. e Com. Ltda. Av. Olegário Maciel 231, Lojas 101 a 105 Barra da Tijuca Rio de Janeiro, RJ CEP Tel Av. Ibirapuera 2.907, Conj. B306 & 7 - Ed. Conv. Corp. Plaza Torre C Indianópolis São Paulo-SP CEP Tel phase@phase.com.br