A / At MAR1 24 V c / 24 C 240 V a B Relay 1 x 8 A changeover 0.1 s C 100 h

Size: px
Start display at page:

Download "A / At MAR1 24 V c / 24 C 240 V a B Relay 1 x 8 A changeover 0.1 s C 100 h"

Transcription

1 Chronos 2 DIN rail mounted, DIN rail modular casings Casing width (mm) Connections Functions Type of output Output(s) Timing Supply Part number Type MUR / t MR1 B 0.1 s C 100 h MBR1 C MCR1 H / Ht MHR1 L / Li 12 V z MLR MLR1 12 V z MUR MUR3 0.1 s C 100 h 12 C 240 V z Spring terminals MURc3 d / h / N / O / P Pt / TL / Tt / W MXR MUS Solid state s C 100 h 24 C 240 V z MS5 H / Ht MHS2 L / Li MLS2 240 V a EMR7 110 V a EMR x s C 20 h 24 V z EMR9 Di / D / W / Pe 17.5 c / d / Bw / Cx / N / O / Tt 1 x s => 20 h 12 C 240 V c / 12 C 240 V c / EMER EMYR8 DIN rail industrial casings Casing width (mm) Connections Functions Type of output Output(s) Timing Supply Part number Type TUR1 / t TR1 B TBR C 0.1 s C 100 h TCR1 H / Ht THR1 L / Li TLR1 Q TQR * RQR1* K 2 x s C 160 s TK2R TU2R4 1 inst. or timed 8 12 V z * RU2R4* TUR s C 100 h T2R1 / t 2 x * R2R1* TUR3 12 C 240 V z Spring terminals TURc d / h / N / O / P Pt / TL / Tt / W Q 1 inst. or timed 8 1 inst. or timed s C 100 h 230 C 440 V a 12 C 240 V z * vailable in The casing of the new range will be different from the ones presented here. Further information can be found on the data sheets available at TX2R * RX2R1* TXR TQR * RQR6* TU2R * RU2R3* TU2R * RU2R1* 14 I 15

2 industrial casings Casing width (mm) Connections Functions (detail on pages 20 to 23) Type of output Output(s) Timing Supply Part number Type pin base OUR1 2 x O2R1 C OCR1 0.1s C 100 h L / Li OLR1 12 V z OUR4 12 C 240 V z OUR3 1 inst. or timed PU2R P2R1 C 2 x 8 0.1s C 100 h PC2R1 L / Li PL2R1 12 V z PU2R4 1 inst. or timed 8 12 C 240 V z PU2R3 12 V c RTM2 24 V c RTM2 2 x 5 24 V a RTM2 110 V a RTM2 0.1s C 100 h 230 V a RTM2 12 V c RTM4 24 V c RTM4 4 x 3 24 V a RTM4 110 V a RTM4 230 V a RTM4 "Panel mounted", nalogue - TMR48 series Digital Dimensions (mm) Connections Functions (Detail on pages 20 to 23) Type of output Output(s) Supply Part number Type L / Li - G / Gi TMR 48 L 2 timed, B, C, W, G, c, Bw TMR 48 U 2 x 5 12 C 240 V c TMR 48 2 timed or 1, 2, H1, H2, Q1, Q2, D-Di 1 timed and 1 instantaneous TMR 48 X (2 x 5 ) Dimensions (mm) Connections Functions (Detail on pages 20 to 23) Type of output Output(s) Supply Part number Type 2 timed 2 x 5, B, C, D, Di, H 1 x 8 timed, B, C, D, Di, H 1, 2, M, Mt 1, 1C, 2, 2C, M, Mt, B, BM, C, CM, D, Di, DiM, Dpause, H, HM, T,TM, W, WM ccessories available: base socket 8-pin for DIN Rail mount , base socket 11-pin for DIN Rail mount x 8 timed 2 timed or 1 timed and 1 instantaneous (2 x 8 ) 2 timed or 1 timed and 1 instantaneous (2 x 5 ), B, C, D, Di, H 1 x 8 timed 24 V z Timer V a Timer C 240 V a Timer V c / 24 C 48 V z Timer V z / 110 C 240 V a Timer V c / 24 C 48 V z Timer V z / 110 C 240 V a Timer V c / 42 C 48 V z Timer V z / 110 V a Timer V c / 220 C 240 V a Timer V z / 100C240 V a Timer 815E 24 V z / 48 V z Timer V z / 110 V a Timer V z / 220 C 240 V a Timer V z / 48 V z Timer V z / 110 V a Timer V z / 220 C 240 V a Timer 816 The timer accessories guide is available on the product data sheets which can be downloaded from the website 16 I 17

3 MB series 22 (diameter) Solid state 400 m 22 (diameter) Solid state 200 m 0.1 s C 1 s MB2F 0.5 s C 10 s MB2F 3 s C 60 s 100 C 240 V z MB2F 0.5 min C 10 min MB2F 3 min C 60 min MB2F 0.1 s C 1 s MB3F 0.5 s C 10 s MB3F 3 s C 60 s 24 V c MB3F 0.5 min C 10 min MB3F 3 min C 60 min MB3F Electromechanical - Top 2000 range Manual reset timed and 1 timed instantaneous (2 x 5 ) 1 timed and 1 timed instantaneous (2 x 5 ) 1 x 16 timed 2 x 16 timed 3 x 16 timed 6 s C 12 mn 6 mn C 12 h 24 V a Top C 48 V a Top C 127 V a Top C 240 V a Top V a Top C 48 V a Top C 127 V a Top C 240 V a Top V a Top V a Top C 48 V a Top C 48 V a Top C 127 V a Top C 127 V a Top C 240 V a Top C 240 V a Top min (Max.display time : 14 min) min (Max.display time : 28 min) min (Max.display time : 56 min) 127 / 230 V a min (Max.display time : 1 h 53 min) 50 Hz h (Max.display time : 4 h 43 min) h (Max.display time : 14 h 10 min) h (Max.display time : 28 h 20 min) min (Max.display time : 14 min) min (Max.display time : 28 min) min (Max.display time : 56 min) 127 / 230 V a min (Max.display time : 1 h 53 min) 50 Hz h (Max.display time : 4 h 43 min) h (Max.display time : 14 h 10 min) h (Max.display time : 28 h 20 min) min (Max.display time : 14 min) min (Max.display time : 28 min) min (Max.display time : 56 min) 127 / 230 V a min (Max.display time : 1 h 53 min) 50 Hz h (Max.display time : 4 h 43 min) h (Max.display time : 14 h 10 min) h (Max.display time : 28 h 20 min) The timer accessories guide is available on the product data sheets which can be downloaded from the website 18 I 19

4 Function diagrams Generic functions function: Delay on Single shot timing which starts on. c function: Timing after closing and opening of control contact d function: Delay on (cannot be reset) fter, a control pulse or latching contact starts timing. t the end of timing, the output is excited. The output will be reset when a new control pulse or latching contact occurs. h function: Single shot flip-flop (cannot be reset) 2 relays including 1 instantaneous fter, closing of the control contact results in starting of the time delay T. Output relay "R" (or the load) changes state at the end of this time delay. fter opening of contact C (Y1), relay "R" drops out after a second time delay T. fter, a control pulse or latching contact starts timing. t the end of timing, the output is excited. The time delay is then reset. t the end of this new time delay, the output reverts to its initial value. t function: Timing on with memory M function: Delay on Latching during the time delay. Mt function: Delay on Latching during and after the time delay. B function: Timing on impulse (one shot) - Shaping (cannot be reset) fter, an impulse ( 50 ms) or a latching contact causes a change in state of the output relay "R" (or the load) which drops out at the end of timing. Bw function: Pulse output (adjustable) 2 relays including 1 instantaneous On closing and opening of the control contact C (Y1), the output relay "R" (or the load) changes state for as long as the time delay lasts. C function: Timing after impulse True delay off (without auxiliary power supply) H function: Timing on - Pulse output (adjustable) On, the output relay "R" (or the load) changes state, and stays there for the whole duration of the time delay and drops out at the end of the single shot cycle. Ht function: Delay on with memory dds up the total opening time On, the output relay "R" (or the load) changes state, and stays there for the whole duration of the time delay and drops out at the end of the single shot cycle. K function: Delay on de- True delay off (without auxiliary power supply) L function: symmetrical flashing On, the output relay "R" (or the load) changes state. On de- timing starts and the relay "R" will only drop out at the end of this time delay. Repetitive cycle with two times which can be set independently. 2 relays including 1 instantaneous Each time delay alternates with a different state of the output relay "R" (or the load). Note: The cycle starts with the relay "R"in the rest position. Li function: symmetrical flashing Repetitive cycle with two times which can be set independently. P and Pe functions: Impulse counter (delay on) P function: Timing starts on. t the end of timing, the output relay "R" (or the load) changes state for approximately 500 ms. Pe function: On. t the end of timing, the output relay "R" (or the load) changes state for approximately 1 s. Pt function: Impulse counter (delay on) Q function: "Star-delta" starting TL function: Impulse relay dds up the total opening time t the end of timing, the output is excited for approximately 500 ms. On, the "star" contact closes instantaneously and timing starts. t the end of timing the Ti "star" contact opens. fter a pause of 40 to 100 ms the "delta" contact closes. fter, a control pulse or latching contact closes the relay. second control pulse opens the relay. dds up the opening time Output relay "R" (or the load) changes state at the end of timing. 1 function: Delay on 1 timer 1 instantaneous relay 2 function: Delay on 2 timers. fter, closing of the control contact C (Y1) results in the change of state of output relay "R" (or the load). Timing will only start when this contact opens. D or Di functions: Symmetrical flashing Repetitive cycle which alternately sets the output relay "R" (or the load) to operating and rest position for equal periods of time. D function: The cycle starts with relay "R" in rest position. Di function: The cycle starts with relay "R" in operating position. N function: "Safe-guard" O function: "Delayed safe-guard" On the first control pulse, the output is excited. If the interval between two impulses is longer than the timing value, this occurs normally and the output relay "R" (or the load) will change state at the end of timing. Otherwise, relay "R" stays in its original state until the condition is fulfilled. On, a first timer runs and the output relay "R" (or the load) changes state. On the appearance of a control pulse, relay "R" returns to its initial position and stays there as long as the time interval between 2 impulses is less than the timing value. Otherwise, relay "R" will change state at the end of timing. Tt function: Timed impulse relay fter, a control pulse or latching contact closes the relay and starts timing. The relay opens at the end of timing or on a second control pulse. W function: Timing after pulse on control contact fter, opening of the control contact results in a change in the state of output "R" (or the load) and timing starting. 20 I 21

5 Function diagrams Start : Start timing Reset : Reset to zero 815E dedicated functions 2 function: Delay on M function: Delay on 2c function: Delay on Mt function: Delay on TMR48 dedicated functions TMR48 function: Delay on TMR48 U function: On-delay c function: Timing after closing and opening of control contact B function: Timing on impulse (one shot) Latching during the time delay B function: Timing on impulse (one shot) Latching during the time delay B function with latching: Timing on impulse (one shot) 1 function: Delay on Bw function: Pulse output (adjustable) C function: Timing after impulse C function with latching: Timing after impulse 2 function: Delay on D function: Flip-flop Di function: Flip-flop D-Di function: Symmetrical flashing C function: Off-delay Di function with latching: Flip-flop D pause function: Flip-flop H1 function: Timing on G function: Cyclical function H function: Timing on H function with latching: Timing on H2 function: Timing on L/LiG/Gi function: Cyclical flashing timers T function: Timing on T function with latching: Timing on Q1 function: Star-delta "starting" W function: Off-delay W function with latching: Off-delay timer Q2 function: "Star-delta 2" starting W function: Off-delay 22 I 23

Control & Automation Overview. Behind every project, technologies and expertise. Timers. Control relays. Counters and Ratemeters

Control & Automation Overview. Behind every project, technologies and expertise. Timers. Control relays. Counters and Ratemeters Timers Control relays Counters and Ratemeters Temperature controllers Safety relays Logic controllers Control & Automation Overview Behind every project, technologies and expertise www.crouzet.com Contents

More information

Micro-control. Control system solutions adapted to your applications. Overview. b Logic controllers. b Control relays. b Timers.

Micro-control. Control system solutions adapted to your applications. Overview. b Logic controllers. b Control relays. b Timers. 08 Overview Micro-control Control system solutions adapted to your applications b Logic controllers b Control relays b Timers Overview Micro-control Contents b Presentation of the offer P. 4-5 b Overviews

More information

Solid-State Digital Timer

Solid-State Digital Timer Solid-State Digital Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay,

More information

Micro-control. Control system solutions adapted to your applications. b Logic controllers.

Micro-control. Control system solutions adapted to your applications. b Logic controllers. 09 Micro-control Control system solutions adapted to your applications Logic controllers Overview Micro-control Contents Presentatio Overviews Micro-cont Editorial For over 40 years, Crouzet has estalished

More information

02/11/2015

02/11/2015 DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage

More information

Timer and switching relays Timers. Function timer relay. Additional function relay. Timer and switching relay

Timer and switching relays Timers. Function timer relay. Additional function relay. Timer and switching relay Timer and switching relay Timer and switching relays Timers Power-on delayed Power-off delayed Power-on and power-off delayed Switch-on and/or switch-off wiping (pulse shaper) Function timer relay Clock

More information

ALLEN BRADLEY TIMING RELAY

ALLEN BRADLEY TIMING RELAY ALLEN BRADLEY TIMING RELAY Configuration Details Product: 700-HS12BA1 Description: 700-HS General Purpose Square Base Timing Relay, On Delay Timer, 1.0 to 180 seconds, DPDT, 120V AC 50/60Hz CONTROL RELAY

More information

Catalogue Ignitors and power switches for HID

Catalogue Ignitors and power switches for HID Catalogue 2012 Ignitors and power switches for HID Overview Product overview Ignitor matrix Standards Page 6 Page 7 Page 8 Product information Ignitors and power switches for HID Page 9 Superimposed-pulse

More information

15 Series - Dimmer

15 Series - Dimmer Features Master slave system for multiple load dimming Suitable for incandescent and halogen lighting loads (with or without transformer or electronic supply) Compatible with energy saving (CF or ED) dimmable

More information

Level Measurement silometer FMC 420, FMC 423

Level Measurement silometer FMC 420, FMC 423 Technical Information TI 077F/00/en Level Measurement silometer FMC 420, FMC 423 For connecting to capacitance probes or Deltapilot S hydrostatic probes Main applications The is used for continuous level

More information

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N

Weekly Timer. Mounting track 50 cm (1.64 ft) length PFP-50N 1 m (3.28 ft) length PFP-100N Weekly Timer 1/4 DIN Size Timer Features Prompted Programming and Large LCD Display 24 hours x 7 days programming using just 5 switches 16 program steps and cycle operation Two independent 15 A control

More information

SINCE 1989 Quality Products, Prompt Services, Trustful Relationships www.kmindustrialcorp.com KM Industrial Corporation has established itself as a trusted supplier of Electrical, Machinery and Industry

More information

PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories

PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.

More information

EKT 121/4 ELEKTRONIK DIGIT 1

EKT 121/4 ELEKTRONIK DIGIT 1 EKT 121/4 ELEKTRONIK DIGIT 1 Kolej Universiti Kejuruteraan Utara Malaysia Bistable Storage Devices and Related Devices Introduction Latches and flip-flops are the basic single-bit memory elements used

More information

Dimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control

Dimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control Kitchen light control Bedroom light control 15 SЕRES iving room light control ighting control in corridors (for hotels, offices and hospitals) FDER reserves the right to alter characteristics at any time

More information

TE s AGASTAT relays are available in two basic operating types: On-Delay and Off-Delay.

TE s AGASTAT relays are available in two basic operating types: On-Delay and Off-Delay. TE s AGASTAT relays are available in two basic operating types: On-Delay and Off-Delay. On-Delay: Provides a delay period on energization, at the end of which the switch contacts transfer. De-energizing

More information

Counters

Counters Counters A counter is the most versatile and useful subsystems in the digital system. A counter driven by a clock can be used to count the number of clock cycles. Since clock pulses occur at known intervals,

More information

Solution Selection Guide

Solution Selection Guide Solution Selection Guide 2015-2016 Automation Systems Motion & Drives Sensing Control Components Switching Components Safety Timers & Counters V Contents Selection Guide V-ii Digital Timers H5CX-N Digital

More information

Multifunction devices

Multifunction devices devices devices devices, electronic Type Page LED multifunction displays pulse, frequency, time (DC) Codix 524 240 pulse, frequency, time (AC+DC) Codix 544 243 LCD multifunction preset counters 1 or 2

More information

Digital Fundamentals: A Systems Approach

Digital Fundamentals: A Systems Approach Digital Fundamentals: A Systems Approach Latches, Flip-Flops, and Timers Chapter 6 Traffic Signal Control Traffic Signal Control: State Diagram Traffic Signal Control: Block Diagram Traffic Signal Control:

More information

Time-Lag Relays. User s Handbook (General Model)

Time-Lag Relays. User s Handbook (General Model) Time-Lag Relays User s Handbook (General Model) 651.601.387 Rev: V39 Date: 09/2016 Electrotécnica Arteche Smart Grid, S.L. This document, including texts, photos, graphics and any other content, is protected

More information

XT-17M-B relay - Delay-off, 1 C/O, 16 A

XT-17M-B relay - Delay-off, 1 C/O, 16 A - Delay-off, 1 C/O, 16 A Datasheet Features Delay-off Single function Time ranges: XT-17M-B1 0.1...1 s XT-17M-B2 1...10 s XT-17M-B3 6...60 s XT-17M-B4 1...10 min XT-17M-B5 6...60 min XT-17M-B6 1...10 h

More information

Figure 30.1a Timing diagram of the divide by 60 minutes/seconds counter

Figure 30.1a Timing diagram of the divide by 60 minutes/seconds counter Digital Clock The timing diagram figure 30.1a shows the time interval t 6 to t 11 and t 19 to t 21. At time interval t 9 the units counter counts to 1001 (9) which is the terminal count of the 74x160 decade

More information

DIGITAL TIMER - MODES- rev. 5.5

DIGITAL TIMER - MODES- rev. 5.5 JUMPER LOGIC The different modes described can be accessed by setting the jumpers according to the following table. MODE JUMPER DESCRIPTION B C D 1 ON ON ON MANUAL STOP WITH CANCEL 2 OFF ON ON MANUAL STOP

More information

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE. On Industrial Automation and Control INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR NPTEL ONLINE CERTIFICATION COURSE On Industrial Automation and Control By Prof. S. Mukhopadhyay Department of Electrical Engineering IIT Kharagpur Topic Lecture

More information

02/11/2015

02/11/2015 24 x 48 Totalizers CTR24 non-backlit model Part number 87622062 Display : 8-digit LCD, height 8 mm Powered by a lithium battery Counter inputs : solid state (4-30 VDC) or voltage (10 260 VAC) Reset on

More information

and Refrigeration Institute). Hydraulic Elevator Wye-Delta Contactors

and Refrigeration Institute). Hydraulic Elevator Wye-Delta Contactors C7 Series C7 Special Use designed and labeled for specific industrial applications The C7 line includes a number of contactors designed and labeled for specific industrial applications. In most cases,

More information

Alphanumeric Index. Circuit Breakers Transformers Low-signal PC Board Relays Mid-Range PC Board Relays...

Alphanumeric Index. Circuit Breakers Transformers Low-signal PC Board Relays Mid-Range PC Board Relays... Alphanumeric Index Series Type Page Timer Accessories... 1206 Timer Terms and Definitions... 1204 Timer Timing Modes... 1205 2100... Miniature Electropneumatic Timer... 1254 7000... Electropneumatic Timer...

More information

Contactors and Contactor Assemblies

Contactors and Contactor Assemblies Terminal designations according to EN 50 012 3RT10 1 contactors Ident. no. 10E 01 Sizes S0 to S12 Terminal designations according to EN 50 012 3RT10 2 to 3RT10 7, 3RT12, 3RT14 contactors 3RT10 1 contactors

More information

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection

More information

Linear encoders without bearings incremental System for linear motion feedback

Linear encoders without bearings incremental System for linear motion feedback Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system

More information

STX Stairs lighting controller.

STX Stairs lighting controller. Stairs lighting controller STX-1795 The STX-1795 controller serves for a dynamic control of the lighting of stairs. The lighting is switched on for consecutive steps, upwards or downwards, depending on

More information

Multifunction Digital Timer

Multifunction Digital Timer Multifunction Digital Timer 72 x72 mm Timer with Easy-to-use Functions Nine output modes accommodate a wide variety of applications. All parameters set by scroll-through menus accessed from the front panel.

More information

Pluggable interface relays CR-M Miniature relays

Pluggable interface relays CR-M Miniature relays 2CDC 293 035 F0004 1 2 4 3 5 Features Standard miniature relays with mechanical status indication 12 different supply s: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V,

More information

ASYNCHRONOUS COUNTER CIRCUITS

ASYNCHRONOUS COUNTER CIRCUITS ASYNCHRONOUS COUNTER CIRCUITS Asynchronous counters do not have a common clock that controls all the Hipflop stages. The control clock is input into the first stage, or the LSB stage of the counter. The

More information

Today 3/8/11 Lecture 8 Sequential Logic, Clocks, and Displays

Today 3/8/11 Lecture 8 Sequential Logic, Clocks, and Displays Today 3/8/ Lecture 8 Sequential Logic, Clocks, and Displays Flip Flops and Ripple Counters One Shots and Timers LED Displays, Decoders, and Drivers Homework XXXX Reading H&H sections on sequential logic

More information

Chapter 6. Flip-Flops and Simple Flip-Flop Applications

Chapter 6. Flip-Flops and Simple Flip-Flop Applications Chapter 6 Flip-Flops and Simple Flip-Flop Applications Basic bistable element It is a circuit having two stable conditions (states). It can be used to store binary symbols. J. C. Huang, 2004 Digital Logic

More information

PGT104 Digital Electronics. PGT104 Digital Electronics

PGT104 Digital Electronics. PGT104 Digital Electronics 1 Part 5 Latches, Flip-flop and Timers isclaimer: Most of the contents (if not all) are extracted from resources available for igital Fundamentals 10 th Edition 2 Latches A latch is a temporary storage

More information

First Name Last Name November 10, 2009 CS-343 Exam 2

First Name Last Name November 10, 2009 CS-343 Exam 2 CS-343 Exam 2 Instructions: For multiple choice questions, circle the letter of the one best choice unless the question explicitly states that it might have multiple correct answers. There is no penalty

More information

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A DATASHEET - NZMN3-VE630 Circuit-breaker, 3p, 630A Part no. NZMN3-VE630 Catalog No. 259133 EL-Nummer (Norway) 0004358791 Similar to illustration Delivery program Product range Circuit-breaker Protective

More information

Computer Organization & Architecture Lecture #5

Computer Organization & Architecture Lecture #5 Computer Organization & Architecture Lecture #5 Shift Register A shift register is a register in which binary data can be stored and then shifted left or right when a shift signal is applied. Bits shifted

More information

GuardPLC Certified Function Blocks -- Basic Suite

GuardPLC Certified Function Blocks -- Basic Suite GuardPLC Certified Function Blocks -- Basic Suite Catalog Number 753-CFBBASIC Safety Reference Manual Important User Information Solid state equipment has operational characteristics differing from those

More information

Assembly. Front view. LEDs. Parametrization interface. Power Bus

Assembly. Front view. LEDs. Parametrization interface. Power Bus otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit

More information

Datasheet - SRB301LC 24VAC/DC

Datasheet - SRB301LC 24VAC/DC 25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred

More information

RS flip-flop using NOR gate

RS flip-flop using NOR gate RS flip-flop using NOR gate Triggering and triggering methods Triggering : Applying train of pulses, to set or reset the memory cell is known as Triggering. Triggering methods:- There are basically two

More information

Introduction. NAND Gate Latch. Digital Logic Design 1 FLIP-FLOP. Digital Logic Design 1

Introduction. NAND Gate Latch.  Digital Logic Design 1 FLIP-FLOP. Digital Logic Design 1 2007 Introduction BK TP.HCM FLIP-FLOP So far we have seen Combinational Logic The output(s) depends only on the current values of the input variables Here we will look at Sequential Logic circuits The

More information

The outputs are formed by a combinational logic function of the inputs to the circuit or the values stored in the flip-flops (or both).

The outputs are formed by a combinational logic function of the inputs to the circuit or the values stored in the flip-flops (or both). 1 The outputs are formed by a combinational logic function of the inputs to the circuit or the values stored in the flip-flops (or both). The value that is stored in a flip-flop when the clock pulse occurs

More information

Timing Pulses. Important element of laboratory electronics. Pulses can control logical sequences with precise timing.

Timing Pulses. Important element of laboratory electronics. Pulses can control logical sequences with precise timing. Timing Pulses Important element of laboratory electronics Pulses can control logical sequences with precise timing. If your detector sees a charged particle or a photon, you might want to signal a clock

More information

Logic Design. Flip Flops, Registers and Counters

Logic Design. Flip Flops, Registers and Counters Logic Design Flip Flops, Registers and Counters Introduction Combinational circuits: value of each output depends only on the values of inputs Sequential Circuits: values of outputs depend on inputs and

More information

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A Deliveryprogramme Circuitbreak.3pselect.protection Partno. Articleno. 265777 NZMH4-VE1600 Product range Circuit-breaker Protective function Systems, cable, selectivity and generator protection Standard/Approval

More information

MUHAMMAD NAEEM LATIF MCS 3 RD SEMESTER KHANEWAL

MUHAMMAD NAEEM LATIF MCS 3 RD SEMESTER KHANEWAL 1. A stage in a shift register consists of (a) a latch (b) a flip-flop (c) a byte of storage (d) from bits of storage 2. To serially shift a byte of data into a shift register, there must be (a) one click

More information

Page 1 of 7 Preselection and multifunction up/down counters 48x48 - CPT4 - Electronic multifunction counters CPT4 - LCD - 6 x 9 mm digits Selling points of the range Preselection counter, Tachometer, Timer,

More information

Slide 1. Flip-Flops. Cross-NOR SR flip-flop S R Q Q. hold reset set not used. Cross-NAND SR flip-flop S R Q Q. not used reset set hold 1 Q.

Slide 1. Flip-Flops. Cross-NOR SR flip-flop S R Q Q. hold reset set not used. Cross-NAND SR flip-flop S R Q Q. not used reset set hold 1 Q. Slide Flip-Flops Cross-NOR SR flip-flop Reset Set Cross-NAND SR flip-flop Reset Set S R reset set not used S R not used reset set 6.7 Digital ogic Slide 2 Clocked evel-triggered NAND SR Flip-Flop S R SR

More information

Factory configured macros for the user logic

Factory configured macros for the user logic Factory configured macros for the user logic Document ID: VERSION 1.0 Budapest, November 2011. User s manual version information Version Date Modification Compiled by Version 1.0 11.11.2011. First edition

More information

K-BUS Dimmer Module User manual-ver. 1

K-BUS Dimmer Module User manual-ver. 1 K-BUS Dimmer Module User manual-ver. 1 KA/D0103.1 KA/D0203.1 KA/D0403.1 Content 1. Introduction... 3 2. Technical Parameter... 3 3. Dimension and Connection Diagram... 4 3.1 KA/D0103.1... 4 3.2 KA/D0203.1...

More information

PRE J. Figure 25.1a J-K flip-flop with Asynchronous Preset and Clear inputs

PRE J. Figure 25.1a J-K flip-flop with Asynchronous Preset and Clear inputs Asynchronous Preset and Clear Inputs The S-R, J-K and D inputs are known as synchronous inputs because the outputs change when appropriate input values are applied at the inputs and a clock signal is applied

More information

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1.

Technical data. General specifications. 60 ma Power consumption P 0. 1 W Time delay before availability t v. 120 ms Interface. Protocol IO-Link V1. Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE programmable switch outputs Selectable sound lobe width Synchronization options

More information

Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T

Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T Dimming actuators of the FIX series DM 4-2 T, DM 8-2 T DM 4-2 T 4940280 DM 8-2 T 4940285 Updated: Jun-16 (Subject to change) Page 1 of 70 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2

More information

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 DATASHEET - NZMC1-A160 Circuit-breaker, 3p, 160A Part no. NZMC1-A160 Catalog No. 283296 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection

More information

Bulletin 190 Compact. Combination Starters

Bulletin 190 Compact. Combination Starters 0Circuit reaker ulletin 10 ulletin 10 Compact Combination Starters Power Range 0.1...45 ulletin 10E Modular Eco Starters ulletin 10S Pre-wired Compact Starters Uses ulletin 140M Motor Protectors and ulletin

More information

Operating instructions - High Performance LED Timer / / /

Operating instructions - High Performance LED Timer / / / Operating instructions - High Performance LED Timer 0 742 201/ 0742 202/ 0 742 251/ 0 742 252 Your tico 742 timer is a powerful instrument which can be field configured to fit a wide variety of applications.

More information

Electrical connection

Electrical connection Splice sensor Dimensioned drawing en 04-2014/06 50116166-01 4mm 12-30 V DC We reserve the right to make changes DS_IGSU14CSD_en_50116166_01.fm Reliable detection of splice on paper web or plastic web With

More information

Electronic Pulse Counter Combination device

Electronic Pulse Counter Combination device Electronic Pulse Counter Combination device measuring monitoring analysing Input: pulse counter, time meter Display: 6-digit LED Height of digits: 14/8 mm Operation with front-panel buttons Material: plastic

More information

Digital Fundamentals 11/2/2017. Summary. Summary. Floyd. Chapter 7. Latches

Digital Fundamentals 11/2/2017. Summary. Summary. Floyd. Chapter 7. Latches igital Fundamentals Tenth Edition Floyd hapter 7 2009 Pearson Education, Upper 2008 Pearson Saddle iver, Education N 07458. All ights eserved A latch is a temporary storage device that has two stable states

More information

CHW 261: Logic Design

CHW 261: Logic Design CHW 26: Logic Design Instructors: Prof. Hala Zayed Dr. Ahmed Shalaby http://www.bu.edu.eg/staff/halazayed4 http://bu.edu.eg/staff/ahmedshalaby4# Slide Digital Fundamentals CHAPTER 7 Latches, Flip-Flops

More information

Datasheet - SRB-E-201ST

Datasheet - SRB-E-201ST 27.04.2016-16:36:21h Datasheet - SRB-E-201ST Multi-function safety modules / SRB-E-201ST STOP 0 Function 1 oder 2-channel control Start button / Auto-start Monitoring two-hand control panels to EN 574

More information

ISE, Inc Royalton Rd. Cleveland, OH USA Tel: (440) Fax: (440) B Long Ranger Timer

ISE, Inc Royalton Rd. Cleveland, OH USA Tel: (440) Fax: (440) B Long Ranger Timer ISE, Inc. 10100 Royalton Rd. Cleveland, OH 44133 USA Tel: (440) 237-3200 Fax: (440) 237-1744 http://instserv.com 365B Long Ranger Timer INSTALLATION INSTRUCTION November, 2000 3-0365-095-04-00 DESCRIPTION:

More information

Chapter 4. Logic Design

Chapter 4. Logic Design Chapter 4 Logic Design 4.1 Introduction. In previous Chapter we studied gates and combinational circuits, which made by gates (AND, OR, NOT etc.). That can be represented by circuit diagram, truth table

More information

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100 DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective

More information

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL

More information

DALHOUSIE UNIVERSITY Department of Electrical & Computer Engineering Digital Circuits - ECED 220. Experiment 4 - Latches and Flip-Flops

DALHOUSIE UNIVERSITY Department of Electrical & Computer Engineering Digital Circuits - ECED 220. Experiment 4 - Latches and Flip-Flops DLHOUSIE UNIVERSITY Department of Electrical & Computer Engineering Digital Circuits - ECED 0 Experiment - Latches and Flip-Flops Objectives:. To implement an RS latch memory element. To implement a JK

More information

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE INDIVIDUAL CLOCK LINES FOR COUNTING UP OR COUNTING DOWN SYNCHRONOUS HIGH-SPEED CARRY AND BORROW PROPAGATION DELAYS FOR CASCADING ASYNCHRONOUS

More information

Chapter 9 Counters. Clock Edge Output Q 2 Q 1 Q

Chapter 9 Counters. Clock Edge Output Q 2 Q 1 Q hapter 9 ounters 9. Introduction ounters are devices which have a LOK input and produce n outputs. ounters consist of flip-flops connected together in specific ways such that on each clock edge the output

More information

Description Set value in neutral conductor is synchronous with set value Ir of main pole. CSA 100. conductor. I r A 50-63

Description Set value in neutral conductor is synchronous with set value Ir of main pole. CSA 100. conductor. I r A 50-63 Circuit-breaker,4p,63A Partno. NZMH1-4-A63 Articleno. 284426 Similar to illustration Deliveryprogram Product range Circuit-breaker Protective function System and cable protection Standard/Approval IEC

More information

Sequential and Combination Timer TK-415 with RS-232 communication

Sequential and Combination Timer TK-415 with RS-232 communication NOVATEK-ELECTRO LTD. Sequential and Combination Timer TK-415 with RS-232 communication OPERATION MANUAL WWW.NOVATEK-ELECTRO.COM/EN 2011 1. GENERAL PROVISIONS 1.1. BASIC FUNCTIONS - microprocessor controlled.

More information

RS flip-flop using NOR gate

RS flip-flop using NOR gate RS flip-flop using NOR gate Triggering and triggering methods Triggering : Applying train of pulses, to set or reset the memory cell is known as Triggering. Triggering methods:- There are basically two

More information

XTM72E & F Real-Time Clock Modules

XTM72E & F Real-Time Clock Modules Capricorn Controls Ltd Data & Application Notes Page 1 of 8 XTM72E & F Real-Time Clock Modules Originally designed to compliment our wide range of Gen-Set controls, these DC powered Real-Time-Clocks have

More information

Preset counters, electronic

Preset counters, electronic The multifunction preset counters Codix 923 / 924 can be used universally. These preset pulse counters, tachometers or preset timers with up to 6 presets can solve a wide variety of control and monitoring

More information

Magnetic Sensor - Incremental EHP

Magnetic Sensor - Incremental EHP small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display

More information

Series CT7N Bimetallic Overload Relays

Series CT7N Bimetallic Overload Relays Series CT7N imetallic Overload Relays Choose CT7N overloads in DC applications and when monitoring Variable Frequency Drives Sprecher + Schuh has always paid particular attention to the subject of motor

More information

COMP2611: Computer Organization Building Sequential Logics with Logisim

COMP2611: Computer Organization Building Sequential Logics with Logisim 1 COMP2611: Computer Organization Building Sequential Logics with COMP2611 Fall2015 Overview 2 You will learn the following in this lab: building a SR latch on, building a D latch on, building a D flip-flop

More information

Pulse Counters, electromechanical

Pulse Counters, electromechanical Mini Counters W 5 / AW 5 5-digit miniature pulse counter, adding with manual reset Power consumption min. 30 mw Suitable for battery and electronic switching operations Long operating life (50 Mio. pulses)

More information

Pluggable interface relays CR-M Miniature relays

Pluggable interface relays CR-M Miniature relays 2CDC 293 035 F0004 CR-M 1 2 4 3 5 Features Standard miniature relays with mechanical status indication 12 different supply voltages: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions:

More information

Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 Circuit-breaker3psystems/cableprot. Partno. NZMB2-A250 Articleno. 259090 Deliveryprogramme Range Circuit-breaker Protective function System and cable protection Standard/Approval IEC Installation type

More information

Features of the 745T-20C: Applications of the 745T-20C: Model 745T-20C 20 Channel Digital Delay Generator

Features of the 745T-20C: Applications of the 745T-20C: Model 745T-20C 20 Channel Digital Delay Generator 20 Channel Digital Delay Generator Features of the 745T-20C: 20 Independent delay channels - 100 ps resolution - 25 ps rms jitter - 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every

More information

Preset counters, electronic

Preset counters, electronic With its automatic help texts, clearly and legibly displayed on 14 LED segments, the Codix 560 preset counter takes the user effortlessly through the programming. The large user-friendly front keys can

More information

Final Exam review: chapter 4 and 5. Supplement 3 and 4

Final Exam review: chapter 4 and 5. Supplement 3 and 4 Final Exam review: chapter 4 and 5. Supplement 3 and 4 1. A new type of synchronous flip-flop has the following characteristic table. Find the corresponding excitation table with don t cares used as much

More information

EMC Solutions Noise filtering

EMC Solutions Noise filtering Power & Signal Quality TRABTECH EMC Solutions Noise filtering Interference-free power supply and signal transmission A permanent supply and safe data link are essential for the operational reliability

More information

Asynchronous counters

Asynchronous counters Asynchronous counters In the previous section, we saw a circuit using one J-K flip-flop that counted backward in a two-bit binary sequence, from 11 to 10 to 01 to 00. Since it would be desirable to have

More information

Dimming actuators GDA-4K KNX GDA-8K KNX

Dimming actuators GDA-4K KNX GDA-8K KNX Dimming actuators GDA-4K KNX GDA-8K KNX GDA-4K KNX 108394 GDA-8K KNX 108395 Updated: May-17 (Subject to changes) Page 1 of 67 Contents 1 FUNCTIONAL CHARACTERISTICS... 4 1.1 OPERATION... 5 2 TECHNICAL DATA...

More information

Luminaire installation box Surface-mounted box Ceiling installation box

Luminaire installation box Surface-mounted box Ceiling installation box -Smart PTM Ambient light sensor and motion detector for constant lighting control uminaire installation box Surface-mounted box Ceiling installation box Overview: -SMART PTM i is an ambient light sensor,

More information

CSCB58 - Lab 4. Prelab /3 Part I (in-lab) /1 Part II (in-lab) /1 Part III (in-lab) /2 TOTAL /8

CSCB58 - Lab 4. Prelab /3 Part I (in-lab) /1 Part II (in-lab) /1 Part III (in-lab) /2 TOTAL /8 CSCB58 - Lab 4 Clocks and Counters Learning Objectives The purpose of this lab is to learn how to create counters and to be able to control when operations occur when the actual clock rate is much faster.

More information

Flip-Flops. Because of this the state of the latch may keep changing in circuits with feedback as long as the clock pulse remains active.

Flip-Flops. Because of this the state of the latch may keep changing in circuits with feedback as long as the clock pulse remains active. Flip-Flops Objectives The objectives of this lesson are to study: 1. Latches versus Flip-Flops 2. Master-Slave Flip-Flops 3. Timing Analysis of Master-Slave Flip-Flops 4. Different Types of Master-Slave

More information

Operating Instructions (ed. 5.97) Electronic Preset Counter Type Series 904

Operating Instructions (ed. 5.97) Electronic Preset Counter Type Series 904 Operating Instructions 3.96.3 (ed. 5.97) Electronic Preset Counter Type Series 904 1. Description 6 digit preset counter, 2 presets, add./subtr. bright 2-line LCD display with symbols for activated outputs

More information

Multi-functional safety relay modules PROTECT SRB-E

Multi-functional safety relay modules PROTECT SRB-E Multi-functional safety relay modules PROTECT SRB-E PROTECT SRB-E The configurable User-friendly Up to 16 different applications can be selected Monitoring of all conventional safety switchgear Safety

More information

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable

More information

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01 Universal Flow Controller Model 261 / 261-EC-01 Instruction Manual Type ARS 261-EC 01 Art.-no: 82212264 Table of Contents 1. Safety Instructions 2. Product ID - Dimensions 3. Function Description 4. Installation

More information

Programmable time switches Multiple function - daily/weekly

Programmable time switches Multiple function - daily/weekly Programmable time switches ultiple function - daily/weekly Programmable time switches DIN rail mounting n Technical data Type Alpha Rex D21 No. of modules (17.5 mm) 2 Alpha Rex D22 No. of channels 1 2

More information

GFT Channel Digital Delay Generator

GFT Channel Digital Delay Generator Features 20 independent delay Channels 100 ps resolution 25 ps rms jitter 10 second range Output pulse up to 6 V/50 Ω Independent trigger for every channel Fours Triggers Three are repetitive from three

More information

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650 M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de

More information