HDBaseT HDMI Extender

Transcription

1 over Single Cat 6 up to 330 Feet Model Supports 100BaseT Uncompressed Video and Surround Sound Audio User Manual

2 Table of Contents 1. INTRODUCTION Introduction 1.2 Copyright and Trademarks 1.3 FCC Compliance Statement 2. PRODUCT OVERVIEW 2.1 Package Contents 2.2 Product Description Product Features 3. CONNECTION AND OPERATION 3.1 Installation Checklist Front Panel Connections - Transmitter 3.3 Rear Panel Connections - Transmitter Front Panel Connections - Receiver 3.5 Rear Panel Connections - Receiver IR Cable Installation Extender Connection Instructions Troubleshooting Notes TECHNICAL SPECIFICATIONS WARRANTY AND SUPPORT Customer Support and Contact Information 5.2 Warranty Information 5.3 Limitations of Liability

3 1. Introduction 1.1 Introduction Thank you for your purchase from Cable Matters Inc., the Reliable Connectivity company. This User Manual provides an overview of the features and installation of your new over Single Cat 6 Cable up to 330 Feet Please read these instructions carefully before connecting, operating or configuring this product. Please keep this manual for future reference. Contact support@cablematters.com for questions or product support. 1.2 Copyright and Trademarks Specifications are subject to change without notice. Cable Matters is a registered trademark or trademark of Cable Matters Inc. All rights reserved. All other trademarks are the property of their respective owners. 1.3 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 2. PRODUCT OVERVIEW 2.1 Package Contents Please check that the following items are contained in the package: 1 x HDMI Extender Transmitter 1 x HDMI Extender Receiver 2 x AC Power Adapter 2 x HDMI Cables 4 x IR Cables 4 x Mounting Brackets with screws 1 x User Manual (available as a PDF from Cable Matters) NOTE: Two HMDI cables are included. Additional cables are sold separately. 1

4 2.2 Product Description The Cable Matters over Cat 6 connects devices with HDMI up to 330 Feet. One cable transmits video, audio, Ethernet, and control signals using HDBaseT technology. 2.3 Product Features Connect devices with HDMI up to 330 feet apart over a Cat 6 cable Video resolution support for 4K UHD up to 230 feet Supports video over Cat 5e up to 150 feet Supports HDBaseT uncompressed video technology Plug & Play installation with no drivers required Dolby Digital, DTS, Dolby TrueHD, and DTS HD-Master Audio Support Bi-directional IR Control with the included RX and TX cables Bi-directional RS-232 support to connect a PC for control Bi-directional Ethernet to connect a router to a PC or smart device HDCP compliant with HDCP compatible equipment Surface mountable with included brackets and hardware Rugged metal housing with side cooling air vents Includes 2-Pack of 4K rated HDMI cables 2

5 3. CONNECTION AND OPERATION 3.1 Installation Checklist Please review these steps before installing the HDMI Extender Power-off the source and display equipment before connecting Extenders must be located within 3.7 feet of an electrical outlet Recommend max total distance for HDMI cables (in/out) is 20 feet 4K displays require 4K rated HDMI cables in the shortest length needed Use high quality AWG HDMI cables for the best performance Unshielded cable is appropriate for shorter lengths in a low EMI area Shielded cable is appropriate for longer lengths in a high EMI area CATV STB or A/V receivers with HDMI 1.2 may block the signal IR TX & RX cables must have line of sight with source and remote Test the Extender and cabling before installing in a permanent location 3.2 Front Panel Connections - Transmitter 1) HDMI IN: Connect the HMDI input video source cable 2) IR RX/TX: Connect the IR Receiver and Transmitter cables to RX and the TX ports (optional) 3) Ethernet: Connect an RJ45 patch cable to a router to provide internet access. LEDs: Status=green and Data Transfer=yellow 3

6 3.3 Rear Panel Connections - Transmitter 1) RS232: Female DB-9 serial port connects an RS-232 controller 2) Link: Connect a Cat 6 cable with 568B wiring. Green LED Link status indicator verifies a live connection 3) DC/5V: AC power adapter port. Red LED confirms power. 3.4 Front Panel Connections - Receiver 1) HDMI OUT: Connect the HMDI output display cable 2) IR RX/TX: Connect the IR Receiver and Transmitter cables to RX and the TX ports (optional) 3) Ethernet: Connect an RJ45 patch cable to a router to receive internet access. LEDs: Status=green and Data Transfer=yellow 4

7 3.5 Rear Panel Connections - Receiver 1) RS232: Male DB-9 serial port connects an RS-232 device 2) Link: Connect a Cat 6 cable with 568B wiring. Green LED Link status indicator verifies a live connection 3) DC/5V: AC power adapter port. Red LED confirms power. See Section 3.7 for Extender connection instructions 5

8 3.6 IR Cable Installation HDMI Extender transmits bi-directional IR control signals over a Cat 6 cable using HDBaseT technology. Control both the HDMI input source and output display with a paired handheld remote for either side. 1) Connect an IR Transmitter cable to the Transmitter TX port It must have line of sight with the remote for the Output display 2) Connect an IR Receiver cable to Transmitter RX port It must have line of sight to the source HDMI Input IR sensor 3) Connect an IR Transmitter cable to the Receiver TX port It must have line of sight with the remote for the Input source 4) Connect an IR Receiver cable to the Receiver RX port It must have line of sight to the source HDMI Output IR sensor 6

9 3.7 Extender Connection Instructions 1) Power off all the equipment before connecting any cables 2) Connect the HDMI cables to the Transmitter and Receiver boxes 3) Connect the Cat 6 cabling to the Transmitter and Receiver boxes 4) Connect the IR RX and TX cables (optional) 5) Connect the RS-232 cables (optional) 6) Power on all the equipment 7) Select the input source from the display menu 8) Connect the AC power adapters to the Extender boxes 9) Check that the red power LED is lit 10) Check that the green Link LED is lit 11) Check the Ethernet status indicators if a router is connected Note: Test the Extender boxes and connections before installing in a permanent location or mounting with the included brackets. 7

10 3.8 Troubleshooting Notes Verify that the Extender and all connected equipment have power. The red power LED indicator should be lit on the Extender. Verify that all cables are connected to the correct input and output ports. Verify that the correct input source is selected from the display menu. Check the green LED indicators on the front panels of the Extender boxes. All connected equipment must support HDCP. Set-top CATV boxes or A/V receivers with HDMI 1.2 may not function with this HDBaseT Extender. Directly connect the video source to the output display to test for compatibility. Check the audio output settings from the source input device. Test each HDMI cable by connecting it with other equipment. Test the Cat 6 cable with a cable tester. It must be terminated using the 568B wiring standard. High resolution 4K displays may require a heavy gauge AWG or RedMere HDMI cable for cables over 10 feet. Place the Extender boxes away from fluorescent lighting or equipment that generates electrical noise. A Not Supported error message may indicated that the connected equipment does not support HDCP (or more than 2 outputs) for content protected video. Check that the IR sensor on the input source or output display is not blocked (check the user manual of your equipment for the exact location). Reboot the video source and output displays after making changes. Contact support@cablematters.com with any questions. 8

11 4. TECHNICAL SPECIFICATIONS Model Extender Connections - Transmitter/Receiver (each) HDMI Input/Output... 1 x HDMI 19 pin female Ethernet (Local)... 1 x RJ45 8P/8C (568B) female HDBaseT (Link)... 1 x RJ45 8P/8C (568B) female IR RX & TX IrDA (Infrared SIR/FIR khz)... 2 x 3.5mm TRS RS-232 Serial/Transmitter... 1xDB-9 (9 pin: D-Sub) female RS-232 Serial/Receiver... 1xDB-9 (9 pin: D-Sub) male Power... 1 x 5V DC power input Video Resolution Support Maximum x 30Hz (up to 70m) 3D Support... HDMI 1.4b 60hz HDCP... HDCP 1.4 Audio Support... 2 Ch/Dolby/DTS/7.1 Surround Sound Extender Dimensions - Transmitter/Receiver (each) (L x W x H) / Weight x 4.2 x 1 Inches / 9.5 Ounces Included Cables HDMI 4K Rated... 2 x HDMI 19 pin male to male - 6 Ft. IR RX & TX... 2 x Transmitter and Receiver Ft. cord (Cat 6, RS-232, and additional HDMI cables are sold separately) Environmental Operating Temperature F to 104 F Storage Temperature F to 140 F AC Power Supply... US Standard 5V/2A Ft. cord Regulatory Approvals Extender... FCC, C E, RoHS Warranty... Limited One Year User Manual... English Version NOTE: Specifications are subject to change without notice. 9

12 5. Warranty and Support 5.1 Customer Support and Contact Information Cable Matters offers lifetime technical support as an integral part of our commitment to provide industry leading solutions. us with any questions at 5.2 Warranty Information This product is backed by a limited one-year warranty. The warranty covers parts and labor costs only. Cable Matters does not warrant its products from defects or damages arising from misuse, abuse, or normal wear. 5.3 Limitation of Liability In no event shall Cable Matters Inc. (including their officers, directors, employees or agents) be liable for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of, or related to the use of this product exceeding the actual price paid for the product (as allowed by state law. View our compatible HDMI products at 10