TENDER SUMMARY. Tender Title:
|
|
- Tobias Anderson
- 5 years ago
- Views:
Transcription
1 TENDER SUMMARY Tender Title: Tender Ref: Closing Date: OPEN TENDER FOR THE SUPPLY OF FIBER OPTIC CABLE 384 CORE LOOSE TUBE ( FOC 384C ) FOR TELEKOM MALAYSIA BERHAD ( TM ) LPM/2018/T/02/FOC 384C 23 February 2018 (Friday) 1. The purpose of this tender is to realise the aspiration of the LOBs and ultimately TM, it is deemed necessary to have a new high capacity fiber optic cable (FOC) deployed in the network. Currently the cable optic range between 4 cores, 8 cores, 12 cores, 24 cores, 32 cores, 48 cores, 96 cores, 144 cores and 192 cores of various configurations and specific usage characteristic such as underground, overhead and armoured. 2. In order to support the aspiration of 20,20,3,4,6 initiatives the new emerging 384 core FOC is seen as a variable solution to meet the new demands. This 384 core fiber will enable ND to provide broader expansion, fastere deployment with a lover overall cost in order to fulfil the targets set by the LOBs and ultimately realise the aspirations set forth by TM s top management. 3. This tender will support the delivery of high rise building fiberization, Wifi AP establishment, Mobile Unifi and TM Global Next Generation Backhaul (NGBH) in order to achieve of following: a) To increase of bandwidth and service offerings as well as bigger coverage areas. b) To reduce operational cost due to requirement for civil works and installation cost. 4. The scope of this tender are as follow:- a) Supply of FOC 384 core loose tube cable. b) Warranty period for twelve (12) months upon the signing of Delivery Order (DO). c) Training. 5. Tenderer is required to fully comply with the clauses marked as Critical (CRQ) Clause in the Technical Specifications failing which, the Tenderer shall be disqualified from the tender exercise and their tender submission shall be rejected. The list of CRQ clauses are as below: No. Clause No 1. B.3.2 The Fibre Optic Cable shall be of 384 core loose tube type with outside diameter less than 20 mm. The Tenderer shall submit supporting evidence in tender submission. 2. B The fibre core attribute shall be in accordance with ITU-T G.652D and the cable attribute requirement as tabulated in Table 1. The Tenderer shall submit supporting evidence (such as but not limiting to datasheet of fibre core or brochure) in the tender submission.
2 No. Clause No FIBRE ATTRIBUTES Transmission wavelength Mode Field Diameter (MFD) Cladding Diameter Core Concentricity Error Cladding Noncircularity Cut-off Wavelength Macro bend loss Proof Stress Chromatic Dispersion CABLE ATTRIBUTES Attenuation coefficient Polarization Mode Dispersion (PMD) 1310nm, 1490nm, 1550nm and m to 9.5 m with ± 0.6 m at 1310nm wavelength 125 m± 1 m 0.6 m (maximum) 1.0% (maximum) a) Cable Cut-off Wavelength ( cc) shall be maximum 1260nm b) Fibre Cut-off Wavelength ( c) shall be maximum 1250nm Parameter Radius (mm) 30 Value Number of turns 100 Max. at 1625nm (db) 0.1dB 0.69Gpa (minimum) a) Zero Dispersion Slope (S 0max) shall be less than and equal to 0.092ps/nm 2.km b) Zero Dispersion Wavelength shall range from 1300nm (λ 0min) to 1324nm (λ 0max) Maximum from 1310nm to 1625nm is 0.35 db/km Maximum at 1550nm is 0.22 db/km 0.2ps/ km (maximum) Table 1: Fibre Attributes 3. B The fibre optic cable shall be constructed as per Table 2 below. The Tenderer shall submit cross-sectional diagram and/or any supporting evidence in tender submission. REQUIREMENT Fibre Core Counts in Cable Number of tubes Fibre Core Counts in Tube Filler PARAMETER 384 cores Six (6) tubes for inner layer Ten (10) tubes for outer layer 24 cores per tube 2 (outer layer) Table 2: Cable design and construction requirement
3 No. Clause No 4. B The ripcord with minimum 150N breaking load shall be applied under the cable jacket for the purpose of stripping the jacket without damaging the cable core. The Tenderer shall submit supporting evidence in the tender submission. 5. B The colour identification of individual fibre core shall be configured in the following sequence as in Table 3. The tenderer shall submit supporting evidence (such as but not limiting to product brochure or datasheet) in the tender submission. FIBRE REFF. COLOUR COLOUR NUMBER CODE 1 Blue RAL Yellow RAL Green RAL Red RAL Violet RAL Brown RAL Pink RAL Grey RAL Black RAL Orange RAL White RAL Aqua RAL Blue with black tracer RAL Yellow with black tracer RAL Green with black tracer RAL Red with black tracer RAL Violet with black tracer RAL Brown with black tracer RAL Pink with black tracer RAL Grey with black tracer RAL Neutral with black tracer RAL Orange with black tracer RAL White with black tracer RAL Aqua with black tracer RAL 6027 Note: The tracer at the fibres shall be black (RAL 9004) colour. Table 1: Fibre Core Colour and Configuration 6. B The colour identification of individual buffer tube shall be configured in the following sequence as in Table 4. The tenderer shall submit supporting evidence (such as product brochure) in the tender submission. LAYER Inner Layer TUBE NUMBER TUBE COLOUR REFF. CODE 1 Blue with black stripes RAL Yellow with black stripes RAL 1021
4 No. Clause No LAYER Inner Layer Outer Layer TUBE NUMBER TUBE COLOUR REFF. CODE 3 Green with black stripes RAL Red with black stripes RAL Violet with black stripes RAL Brown with black stripes RAL Blue RAL Yellow RAL Green RAL Red RAL Violet RAL Brown RAL Pink RAL Grey RAL Black RAL Orange RAL 2008 Note: The stripe at the inner layer buffer tube shall be black (RAL 9004) colour Table 2: Buffer Tube Colours and Configuration
5 No. Clause No 7. B.5.1 The cable shall subject to the following mechanical and environmental tests and meet the expected outcome to gauge its reliability and durability. The Tenderer shall submit supporting evidence (such as but not limiting to product brochure or data sheet) in the tender submission. NO TEST TYPE TEST METHOD 1 Tensile Test Method E1 2 Crush Test Method E3 3 Cable Bend Test Method E11 4 Impact Test Method E4 5 Repeated Bend Test Method E6 6 Torsion Test Method E7 7 Temperature Cycle Test Method F1 TEST CONDITION Load: 2000N Length under tension: 100m Load: 3000N Mandrel/plate: 25mm mandrel Duration: 10min Mandrel Diameter: 20 x Cable OD No. of turn: 5 No. of cycle: 3 Impact energy: 5J with striking surface radius of 10mm or 20J with striking surface radius of 300mm Striking surface radius: 10 or 300mm No. of impact: 1 times at 3 different places ( > 500 mm apart) Load: 100N Bending radius: 20 x Cable OD No. of cycles: 35 Twist: +/- 180 degree No. of Cycle: 5 Load: 100N Temperature range: -30 C to 70 C No of cycle: 2 REQUIREMENT a) Change in attenuation 0.05 db/km b) No residual elongation. c) No damage to sheath, cable element b) No damage to sheath, cable element b) No damage to sheath, cable element /km
6 NO 8 9 TEST TYPE Water Penetration Test Compound Flow Test 10 Cable Retention TEST METHOD Method F5 Method IEC Test reference GR-771- CORE TEST CONDITION Water height: 1m Sample length: 3m Test period: 24 hour Length of cable under test 300mm Remove outer sheath at 130mm Remove all the non-intrinsic cable elements 80mm Temperature: 70±5 C for 24 hours Apply 10kg load at 1 meter length of the cable from the cable clamp (FRP holder + cable clamp termination hardware) REQUIREMENT No leakage at end of 3m length No dripping of flooding and filling gel after 24 hours. No cable or others cable elements movement during and after test 8. B.8.1 The proposed FOC 384 core shall have successfully implemented and still in operation with minimum 5000 km in total length. Tenderer shall provide supporting evidence as per appendix B and submit upon tender submission. 6. The Tenderer shall deposit a sum of RINGGIT MALAYSIA Fifty Thousand Only (RM50,000.00) as a Tender Deposit and to be submitted in the Tender Proposal during Tender Closing Date.
Optical Fibre Cable Technical Specification. Duct Cable GYFTY-24,48,72,144,216B1.3
Version GYFTY-V1.0 Optical Fibre Cable Technical Specification Duct Cable GYFTY-24,48,72,144,216B1.3 Yangtze Optical Fibre and Cable Joint Stock Limited Company All rights reserved 1. Scope This Specification
More informationMicro duct Cable with HDPE Sheath for Installation by Blowing
Optical Fiber Cable Technology Specification INTERNAL Optical Fiber Cable Specification Micro duct Cable with HDPE Sheath for Installation by Blowing GCYFY-12/24/36/48/72/96/144/288/432/576B1.3 V7.0 2018-3-20,CCopyright.
More informationSpecification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)
2-3, Marunouchi 2-chome, Chiyoda-ku, Tokyo 100-8322, Japan No. FB-KL4001C for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D) Aug 2014 1 1. General This specification describes
More informationGYFTY TECHNICAL SPECIFICATIONS FOR GYFTY CABLE
TECHNICAL SPECIFICATIONS FOR GYFTY CABLE 1 1. Product Description This specification covers the general requirements and performance of cable, which FOC offered including optical characteristics, mechanical
More informationRevision No. 4 Page No. Page 1 of 7
Page No. Page 1 of 7 Single Mode Optical Fibre Cables With Loose Fibres in Stranded Tubes And Corrugated Steel tape Armouring For Duct Applications LITE KABEL SDN. BHD. reserves the right to make changes
More informationSpec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer
Spec No.: ZTT 45012 Revision: 2 Date: Oct 3, 2014 TECHNICAL SPECIFICATION Optical Fiber Cable (Reference: NBR 14566) Designer Senior Technical Manager Approver Chief Technical Engineer Jiangsu Zhongtian
More informationHES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.
Technical Specification Revision/Date: 04/04.15 By N.KARAAĞAÇ Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSJSA41JYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657
More informationOPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE
SPEC NO. TEC-OPTIC-81101A(Rev.4)-2014.07 TECHNICAL PROPOSAL FOR OPTICAL FIBER CABLE, ALL DIELECTRIC SELF SUPPORTING CABLE ( Span length : Max. 100m ) APPROVED BY : J.Y. LEE / HEAD OF TEAM ENGINEERING TEAM
More informationStandard FTTH Drop Cable. FTTH DROP - nb6a1/g657a1
Optical Fibre Cable Technical Specification Standard FTTH Drop Cable FTTH DROP - nb6a1/g657a1 NextraCom Optical Fibre Cable All rights reserved 1.Scope This Specification covers the design requirements
More informationSPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:01 Date: 07.10.06 SPECIFICATION OF 96F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-96/SM/MTY(F)-MFN-O6.3 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More informationSPECIFICATION. Optical Fiber Cable
SPECIFICATION Optical Fiber Cable (GYFS) Prepared by Zhang xin Approved by Yin peng xiang 1 1 Product description GYFS is gel-free, single-jacket, single-armored cable for direct burial and duct GYFS is
More informationSPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE
Revision No.:00 Date: 08.03.2010 SPECIFICATION OF 192F SM LOOSE TUBE, DRY CORE MINI CABLE PART NO.:D-192/SM/MTY(F)-MFN-O9.1 Checked By: Pavan Maheshwari Process Associate Design & Development Team Approved
More informationSINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS)
SINGLE MODE OPTICAL FIBER CABLE SPECIFICATION (ARSS) No. FT-S16274 Version: A (ITU-T Rec. G.652.D) Futong Group Communication Technology (Thailand) Co., Ltd. All Right Reserved Add: No.7/324, Moo 6, T.Mabyangporn
More informationTECHNICAL SPECIFICATION
ISSUED : OCT. 02, 2006 PAGE : 1 OF 9 REV. : 1 TECHNICAL SPECIFICATION FOR GST 2006-043A LOOSE TUBE DRY CORE CABLE SINGLE JACKET/SINGLE ARMOR (SJSA CABLE) Prepared By : Oh-Heoung Kwon Engineer Optical Technical
More informationDetailed Specifications & Technical Data
For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents: No.10 for Fiber Optic Cables.pdf Cable Characteristics: DESCRIPTION: 2 to 12 optical fibers, Central gel filling
More informationOPTICAL FIBRE CABLE NETWORK 2004/1
OPTICAL FIBRE CABLE NETWORK 2004/1 HELKAMA OPTICAL FIBRE CABLES Cabled optical fibre characteristics OS1 singlemode fibre SM ITU-T G.652 Mode field diameter 1310nm 9.3+/-0.5µm Mode field eccentricity 1.0
More informationLD Series High Performance Loose Tube Fiberoptic Cables
Fiberoptic Cables Catalog LD Series High Performance Loose Tube Fiberoptic Cables APPLICATIONS Long-distance outside plant telephone, CATV as well as data communications Direct burial and installation
More informationNumber of Fiber 12 Core 24 Core 48 Core. Part Number
Order Information OUTDOOR OFC-FIG.8, MM (OM2), (50/125) LOOSE TUBE BLACK 1. General 1. Scope 2. Quality Assurance Number of Fiber 12 Core 24 Core 48 Core Part Number 63460012 63460024 63460048 This specification
More information1. Scope OUTDOOR OFC-ADSS, SM(0.9) LOOSE TUBE BLACK
1. General 1. Scope OUTDOOR OFC-ADSS, SM(0.9) LOOSE TUBE BLACK 2. Quality Assurance This specification covers the construction and properties of all-dielectric selfsupporting (ADSS), single jacket, dry
More information1. General. 1. Scope. 2. Quality Assurance
1. General 1. Scope 2. Quality Assurance This specification covers the construction and properties of 50/125 um Multimode (Graded-index, OM2), anti-rodent self-supporting (ARSS), single jacket, single
More informationFIBER OPTIC CABLES. Models GYXTC-8SS GJFJV
FIBER OPTIC CABLES ASTEL offers an innovative and wide range of Optical Fiber Cables from 4 Fiber to 144 Fibers for broadband networks. ASTEL offers variety of models from Uni-Tube construction, to Stranded
More informationNumber of Fiber 6 Core 12 Core 24 Core 48 Core
Order Information OUTDOOR OFC-ADSS-MM (OM3, 50/125) LOOSE TUBE-BLACK Number of Fiber 6 Core 12 Core 24 Core 48 Core Part Number 74060006 74060012 74060024 74060048 1. General 1. Scope This specification
More informationNumber of Fiber 6 Core 12 Core. Part Number
Order Information OUTDOOR OFC-Drop Wire, MM (OM2) (50/125) LOOSE TUBE BLACK Number of Fiber 6 Core 12 Core Part Number 74550006 74550012 1. General 1. Scope 2. Quality Assurance This specification covers
More informationETSI ES V1.1.1 ( )
ES 202 319 V1.1.1 (2004-06) Standard Transmission and Multiplexing (TM); Passive optical components and cables; Optical fibre cables to be used for patchcord applications for single-mode optical fibre
More information1. Scope OUTDOOR OFC-DW-(Twisted), SM (0.9) LOOSE TUBE BLACK
1. General 1. Scope OUTDOOR OFC-DW-(Twisted), SM (0.9) LOOSE TUBE BLACK 2. Quality Assurance This specification covers the construction and properties of optical fiber three tubes stranded, dry core fiber
More informationØ 1000 * 588 mm 50 kg
GOCN Central Loose Tube Cables Outdoor Corrugated Steel Tape Armor (CST) A-DQ(ZN)(SR)2Y Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24 62.5/125-OM1
More informationFREEDM Loose Tube Interlocking Armored Cables
features and benefits Flexible, interlocking armor design Gel-free waterblocking technology Color-coded tubes and fibers UV-resistant, flameretardant jacket UV-Resistant Flame-Retardant Outer Jacket InterlockingArmor
More informationMining and Petrochemical Fiber Optic Cables
Features and Benefits Loose construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation in outdoor or indoor/outdoor applications
More informationGUWN. Central Loose Tube Cables Universal Indoor/Outdoor, Steel Wire Armor (SWA) A/I-DQ(ZN)HBH Full Rodent Protection. Ordering Information
GUWN Central Loose Tube Cables Universal Indoor/Outdoor, Steel Wire Armor (SWA) A/I-DQ(ZN)HBH Full Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24
More informationGBRE. Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection. Ordering Information. Applications. Features & Benefits
GBRE Multi Loose Tube Cables Outdoor A-DQ(ZN)B2Y Improved Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 84 96 62.5/125-OM1 GBRE184 GBRE196 -OM2 BW /1200 GBRE284
More informationHERA RETICULATION FIBRE CABLE PRODUCT REQUIREMENTS
Organisation : NRF (National Research Foundation) Facility : SARAO (South African Radio Astronomy Observatory) Project : HERA (Hydrogen Epoch of Reionization Array) Document Type : PRD (Product Requirements
More informationDelaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011
SECTION 271323 - COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 - GENERAL 1.1 DESCRIPTION A. This section provides the specifications for the work related to the optical fiber system in the project.
More informationOPTICAL CHARACTERISTICS (applied to 12c MPO/MTP ) Item Parameter Reference
MPO/MTP TRUNK CABLE FEATURES MTP (US Conec) brand or MPO standard compliant multifiber connector Connector's design complies with IEC 61754-7 standards 4, 8, 12 and 24-fiber with single mode and multimode
More informationGUXT. Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)BH Improved Rodent Protection. Ordering Information.
GUXT Mini-Breakout Cables (Distribution) Universal Indoor/ Outdoor A/I-VQ(ZN)BH Improved Rodent Protection Ordering Information Belden European Part Numbers Fibre type / count 4 6 8 12 16 24 62.5/125-OM1
More informationSumitomo Cable Specification SE-*RD. All-Dielectric Ribbon Cable with Fibers. Issued: April 2014
Sumitomo Cable Specification SE-*RD Litepipe Ribbon / ADS Sheath Cable All-Dielectric Ribbon Cable with 12-864 Fibers Issued: April 2014 78 Alexander Drive, Research Triangle Park, NC 27709 Phone (919)
More informationSPECIFICATION FIBER OPTIC SPLICE CLOSURE. Spec No : VSS-1007-BS403A-04A/SD. VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division
SPECIFICATION FIBER OPTIC SPLICE CLOSURE Model Spec. No. Distribution Depts. VSOF-BS403A VSS-0107-BS403A-04A/SD R & D Center Manufacturing Division Sales Division Management Division Revision 10. 07 (Rev.4)
More informationSumitomo Cable Specification SE-*RU. OFNP Rated Central Tube Cable with Optical Fibers. Issued: December 2014
Sumitomo Cable Specification SE-*RU Litepipe Ribbon Indoor Plenum Cable OFNP Rated Central Tube Cable with 12-432 Optical Fibers Issued: December 2014 78 Alexander Drive, Research Triangle Park, NC 27709
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationSTANDARD FOR MULTI-DWELLING UNIT (MDU) OPTICAL FIBER CABLE. Publication S First Edition - June 2012
STANDARD FOR MULTI-DWELLING UNIT (MDU) OPTICAL FIBER CABLE Publication S-115-730 First Edition - June 2012 Published By Insulated Cable Engineers Association, Inc. Post Office Box 1568 Carrollton, Ga 30112,
More informationSOLO ADSS Short-Span Cables, Fibers
features and benefits Loose tube design Self-supporting Track-resistant jacket available Innovative waterblocking cable core SOLO ADSS Cable Drawing ZA-2615 Stable performance and compatibility with all
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationMaterial Description Quantity UOM
Page : 1 / 2 OIL INDIA LIMITED Fax-91 0361 2643686 (A Govt. of India Enterprise) Email-oilmatpl@oilindia.in Udyan Vihar, Narengi, Guwahati, Assam Tender No. & Date : GOD3162L12/1H 20.08.2011 Bid Security
More informationProduct Classification. Dimensions. Environmental Specifications. General Specifications. Material Specifications. Mechanical Specifications
E2O540JCASS-12CT MICFIBR-12.7MB MICFIBR-12.7MB DUCT DUCT E2O540JCASS- Product Classification Brand E 2 O E 2 O Coaxial/Fiber/Microduct Hybrid Buried Cable E O is a solution that enables service providers
More informationNon-metallic Aerial Distribution Optical Cables for FTTH Networks
Non-metallic Aerial Distribution Optical Cables for FTTH Networks Go Taki, 1 Akira Namazue, 1 and Ken Osato 1 One of the common practices to construct economical and efficient Fiber To The Home (FTTH)
More information100GBASE-DR2: A Baseline Proposal for the 100G 500m Two Lane Objective. Brian Welch (Luxtera)
100GBASE-DR2: A Baseline Proposal for the 100G 500m Two Lane Objective Brian Welch (Luxtera) Supporters Rob Stone (Broadcom) IEEE 802.3cd Task Force, July 2016 2 100G-DR2 Configuration: A 2x50 Gb/s parallel
More informationRFP LC Uniboot to RFP LC Uniboot Patch cord, 2 fibres, Interconnect tight-buffered cable, LSZH
1 1 9.41 115 0 Pretium EDGE 143 RFP LC Uniboot to RFP LC Uniboot Patch Pretium EDGE Solutions jumpers are integrated reverse -polarity uniboot duplex assemblies that meet the high -density space requirements
More informationProduct Catalogue. Fiber Optic Assemblies & Adapters. Table of Contents General Description... 2
Product Catalogue Fiber Optic Assemblies & Adapters Table of Contents 1. General Description... 2 2. Connectors... 3 2.1 SC/UPC... 3 2.2 SC/APC... 3 2.3 FC/UPC... 3 2.4 FC/APC... 3 2.5 ST/UPC... 3 2.6
More informationNC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM
NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC
More informationSumitomo Cable Specification SE-*DB. 100% Dry - Armored Central Tube Ribbon Cable with Fibers. Issued: January 2014
Sumitomo Cable Specification SE-*DB DriTube Ribbon / Armorlux Sheath Cable 100% Dry - Armored Central Tube Ribbon Cable with 12-576 Fibers Issued: January 2014 78 Alexander Drive, Research Triangle Park,
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION (FIBER OPTIC SPLICE CLOSURE) Model Spec. No. Distribution Depts. VSOF-BS403A SJP-0609-403A-01A/SD Quality Assurance Team Manufacturing Division Sales Division Management Division
More informationSPECIFICATION. Spec No : VSS-1402-CS603B
SPECIFICATION Spec No : VSS-1402-CS603B 1. INTRODUCTION 1.1. General This specification covers the design requirements and characteristics required of fiber optic splice closures to be used on fiber optic
More informationfor FOSTEC INC. 1/ 15
TECHNICAL SPECIFICATION for OPTICAL FIBER PATCH CORD / PIGTAIL FOSTEC / 5 . Scope: This specification is applicable to optical fiber patch cord, pigtail and with w optical connectors. The pigtail is single
More informationSJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1
Fiber Optic Splice Closure 1. Introduction 1.1 General SAMJIN s SJOF-BS604B protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct buried
More informationCisco ONS Exposed Faceplate Mux/Demux 48-Channel Extended Bandwidth Patch Panel and Splitter Coupler Module
Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch Panel and Splitter Coupler Module Product Overview The Cisco ONS 15216 Exposed Faceplate Mux/Demux 48- Extended Bandwidth Patch
More informationProduct Catalogue. Fibre Optic Cable
Product Catalogue Fibre Optic Cable version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around
More informationINDUSTRY SOLUTIONS: MINING
INDUSTRY SOLUTIONS: MINING MS 2 INDUSTRY SOLUTIONS: MINING Optical Cable Corporation is built on a tradition of innovation and dependability. In the early 1980s, Optical Cable Corporation was a pioneer
More informationEmpowering businesses through innovative network solutions.
Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients around the world for nearly two decades. Our experience
More informationCC-Link IE Controller Network Compatible. CC-Link IE Controller Network Recommended Network Wiring Parts Test Specifications
Model Title CC-Link IE Controller Network Compatible CC-Link IE Controller Network Recommended Network Wiring Parts Specifications Management number: BAP-C0401-028-A CC-Link Partner Association (1/31)
More informationThe advantages of using reduced coating diameter optical fibers (200µm) in ADSS cables for deployment in FTTx networks
The advantages of using reduced coating diameter optical fibers (200µm) in ADSS cables for deployment in FTTx networks Paul van Zyl CBI Electric Telecom Cables Brits, South Africa +27-12-381-1498 pvzyl@cbitele.com
More informationTE CONNECTIVITY <cable type> <fiber type> MM/YY SO<shop order number> XXXXX FEET
June 30th, 2015 Rev E2 Optic Interconnect Cables Simplex 1 900um Buffered Aramid Yarn Strength Members 2 s 900um Buffered Aramid Yarn Strength Members 900um Buffered 900um Buffered Aramid Yarn Strength
More information40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
More informationThe BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum.
As of May 8, 2012 BRU-SF10 1. Single mode fiber cable supported The BRU-SF10 supports single mode optical fiber cable ensuring 2,000m transmission at maximum. 2. Status display on the front panel The following
More informationADDENDUM #3. SPECIAL NOTE: Addendum #3 information shall supersede the information contained in the Contract Documents
WESLEYAN U N I V E R S I T Y Facilities 170 Long Lane Middletown, Connecticut 06457 (860) 685-3476 FAX (860) 685-3101 ADDENDUM #3 Date: March 4, 2013 Project: To: CFA A Rehearsal Hall AHU Replacement Annual
More information100G-FR and 100G-LR Technical Specifications
100G-FR and 100G-LR Technical Specifications 100G Lambda MSA Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu,
More informationMar11 Rev E
Product Specification 108-1832 11Mar11 Rev E MT-RJ Patch Panel and Outlet Jacks (Standard, XG, SECURE and SECURE XG) 1. SCOPE 1.1. Content This specification, which meets the Optical Fiber Cabling Components
More informationLIIN-25 FO Pigtail FC (0.9mm)
LIIN25 FO Pigtail FC (0.9mm) Features Single and Multi Mode ISO900, RoHS Compliant Test Certificate for each item Batch number tracking Standards of reference and applications ITU.T G652.D, ISO/IEC 80,
More informationSPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting)
2004 Specifications CSJ 0086-14-046 SPECIAL SPECIFICATION 2284 Fiber Optic Cable (Self-Supporting) 1. Description. Furnish, install, splice, field terminate, and test the fiber optic cables. 2. Materials.
More informationOPTICAL CABLE FIBER-LAN INDOOR
OPTICAL CABLE FIBER-LAN INDOOR Product Type Optic Cable Construction RoHS-2 Compliant Dielectric Tight Buffer Singlemode or Multimode Description Optical cable with singlemode or multimode optical fibers
More information100G SR4 Link Model Update & TDP. John Petrilla: Avago Technologies January 2013
100G SR4 Link Model Update & TDP John Petrilla: Avago Technologies January 2013 100G 100m Transceivers Summary Presentation Objectives: Provide an update of the example link model for 100G 100m MMF Discuss
More informationA Comparison of Dry Versus Gel Filled Optical Cables
Application Notes A Comparison of Dry Versus Gel Filled Optical Cables Author John Peters Issued December 2012 Abstract The dry cable design compares favorably with a wet design that uses a flooding compound
More information400G-FR4 Technical Specification
400G-FR4 Technical Specification 100G Lambda MSA Group Rev 1.0 January 9, 2018 Chair Mark Nowell, Cisco Systems Co-Chair - Jeffery J. Maki, Juniper Networks Marketing Chair - Rang-Chen (Ryan) Yu Editor
More information3M 8900 Single-mode SC Crimplok Connector
3M 8900 Single-mode SC Crimplok Connector Technical Report June 1999 80-6110-1441-8 1 1.0 Product Description & Requirements The 3M SC Single-mode Crimplok Connector is designed to provide the customer
More information40G SWDM4 MSA Technical Specifications Optical Specifications
40G SWDM4 MSA Technical Specifications Specifications Participants Editor David Lewis, LUMENTUM The following companies were members of the SWDM MSA at the release of this specification: Company Commscope
More informationSPECIAL SPECIFICATION 6191 Fiber Optic Cable
2004 Specifications CSJ 0014-02-014, etc SPECIAL SPECIFICATION 6191 Fiber Optic Cable 1. Description. Furnish, install, splice, field terminate, and test the fiber optic cables. 2. Materials. A. General
More informationSpecification of Fusion Splice Loss - FIA TSD Mike Gilmore FIA Technical Director
Specification of Fusion Splice Loss - FIA TSD-2000-4-1-1 Mike Gilmore FIA Technical Director Mike Gilmore Standards Activities Member: ISO/IEC JTC1 SC25 WG3: Generic Cabling ISO/IEC JTC1 SC25 Project Team:
More informationWe design, build, and manage web-scale networks for the needs of tomorrow. System Integration SERVICES
ABOUT STERLITE TECH We design, build, and manage web-scale networks for the needs of tomorrow Optical Communication PRODUCTS System Integration SERVICES Telecom SOFTWARE Among the world s largest integrated
More informationSECTION 4 TABLE OF CONTENTS
Contents Introduction LC, SC and ST Series...4-2 Markets and Applications...4-2 International Standard Documents Compliance...4-2 LC Series Features and Benefits...4-3 LC Standard... 4-4 to 4-5 LC for
More informatione-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service)
R e-enterable Fiber Optic Splice Closure (Re-Enterable Aerial Closure for Access Service) Optical Fiber Drop wire Closure Model FOC-CB1612-24DW. Available with optical fiber cable from 12 up to 24 fibers
More informationIndustry solutions: Broadcast
Industry solutions: Broadcast Bc 2 Industry solutions: Broadcast Optical Cable Corporation s broad range of Fiber Optic Broadcast Cables are specifically designed for real-time transmission of high definition
More informationOptical Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12
Fiber Link, 0.1~ 20 GHz RF Over Fiber, I-IFLRF12 Our I-IFLRF20 series is a wideband RF over fiber link that provides optical transport of RF signals in radars, satcom, EW/ECM and other antenna remoting
More informationSpecification DNA Tracking Resistant ADSS Cable AC024AP6821BD0
PO Box 3127 Spartanburg, SC 29304 Tel: Fax: 1 800 235 3423 1 84 433 550 Specification DNA-31734 Trackg Resistant ADSS Cable Representative 8 unit Fiber Optic Core Representative AFL-ADSS Fiber Optic Cable
More informationA IR-BL O W N SOLUTION C O D. M I C R O C O D. M I C R O D U C T
AIR BLOWN SYSTEM INTRODUCTION 2013 A IR-BL O W N SOLUTION C O D. M I C R O C O D. M I C R O D U C T O P T I R O A D INC. PRODUCT INFORMATION ABS FEATURES APPLICATION STRUCTURE & DIMENSION A IR B L O W
More informationOur cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY
Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY - SYMBOLS AND THE MEANING OF THE SYMBOLS FOR FIBRE OPTIC CABLES - SINGLE LOOSE TUBE, SINGLE SHEATH, NON METALLIC
More informationHI-DEX PRODUCT SET DATASHEET
APPLICATION HI-DEX is an ultra high-performance, pre-terminated and modular optical fibre cabling system based on MT ferrule connector technology. This product set is designed for installationn in the
More informationEVLA Fiber Selection Critical Design Review
EVLA Fiber Selection Critical Design Review December 5, 2001 SJD/TAB 1 Fiber Selection CDR Decision about what fiber to install Select cable Jan 2002 Order cable Jan 2002 Receive cable May 2002 Start installation
More informationGear up for the future.
OptiC@ t5e Gear up for the future. OptiC@t 5e cables will take you there. Gear up for the future. Future-proof your home! The communication cable OptiC@t 5e is a combo of a four pair Cat5e and two bend-insensitive
More informationOptiSPEED LC Keyed Red to Unconnectorized, Fiber Pigtail, 0.9 mm Tight Buffer, 12-fiber Kit, Blue - Aqua (1-12)
FAML1UC0C OptiSPEED LC Keyed Red to Unconnectorized, Fiber Pigtail, 0.9 mm Tight Buffer, 12-fiber Kit, Blue - Aqua (1-12) Fiber Type Total Fibers, quantity 12 Cord Length, maximum 23 ft 7 m Cord Length,
More information200GBASE-DR4: A Baseline Proposal for the 200G 500m Objective. Brian Welch (Luxtera)
200GBASE-DR4: A Baseline Proposal for the 200G 500m Objective Brian Welch (Luxtera) IEEE 802.3bs Task Force, May 2016 Supporters Tom Issenhuth (Microsoft) Rob Stone (Broadcom) Eric Baden (Broadcom) Steve
More informationOPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks
OPTICAL FIBRE CABLES for very-high bit transmission and FTTx networks OPTICAL FIBRE CABLES SILEC CABLE REFERENCES AND KNOW-HOW Since 1983, Silec Cable has successfully supplied the major telecom operators,
More informationHardware Specifications
APPENDIXA Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring
More informationProduct information. OpDAT VIK with breakout cable. Product description. Illustrations. Page 1/7
Page /7 Illustrations Product description Pre-terminated installation cables (VIK) are fiber optic cables with connectors on one or both ends that are made in manual singleitem production at METZ CONNECT
More informationCATEGORY 6A CABLING SOLUTIONS
10 Gigabit Ethernet is nowadays viable solution for destinations with very high data traffic concentration like data center, server farms, MAN s and backbones. Premium Line Category 6A Cabling Solutions
More informationNew Ultra-Density Fiber Cable Technology for FTTx and Access Markets Using New SpiderWeb Ribbon
New Ultra-Density Fiber Cable Technology for FTTx and Access Markets Using New SpiderWeb Ribbon Patrick E. Dobbins, Director Applications Engineering, AFL Brett Villiger, Cable Engineering Development
More information100GBASE-SR4 Extinction Ratio Requirement. John Petrilla: Avago Technologies September 2013
100GBASE-SR4 Extinction Ratio Requirement John Petrilla: Avago Technologies September 2013 Presentation Summary Eye displays for the worst case TP1 and Tx conditions that were used to define Clause 95
More informationD-COAX, Inc. D-COAX d086 Series Cable Pair. High Frequency, Skew Matched, Phase Stable Cable Pair (65 GHz)
D-COAX, Inc. D-COAX d086 Series Cable Pair High Frequency, Skew Matched, Phase Stable Cable Pair (65 GHz) D-COAX d086 Series Cable Pair consists of two skew matched (to 1ps) flexible cable assemblies with
More informationFIBRE OPTIC CABLE SOLUTIONS
point2point FIBRE OPTIC CABLE SOLUTIONS Introduction From patch-leads through to cross-site cables, or optical adapters through to patch panels, PPM s one-stopshop approach to fibre optic cable management
More informationPM Couplers (Polarization Maintaining Couplers)
1/6 PM Couplers (Polarization Maintaining Couplers) Fujikura PM Couplers are produced by Fujikura fused taper technology and knowhow of PANDA fiber. Fujikura PM couplers are qualified with Telcordia GR-1221-CORE
More informationSPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE
SP-CTN-CT3000M,CT3000ML-00 ISSUED : 2015/02/11 PAGE : 8 SPECIFICATION FOR FIBER OPTIC SPLICE CLOSURE CT3000M/CT3000ML Fiber Optic Splice Closure 2 / 8 1. GENERAL This specification covers the standards
More informationHow to Speak Fiber Geek Article 4: Single-Mode Optical Fiber Geometries
Welcome back, Fiber Geeks! The first article in this series highlighted some bandwidth demand drivers and introductory standards information. Article 2 then focused on attenuation and Article 3 followed
More informationMid-Span Access of Loose-Tube Ribbon Fiber Optic Cable
Application Notes Mid-Span Access of Loose-Tube Ribbon Fiber Optic Cable Author Prasanna Pardeshi and Sudipta Bhaumik Issued November 2013 Abstract In fiber optic network, it is sometime necessary to splice
More information