ExpandView CAT5. Quick Installation Guide. F1DV108Aea

Transcription

1 ExpandView CAT5 En Quick Installation Guide F1DV108Aea

2 TABLE OF CONTENTS INTRODUCTION Intoduction 1. What is the ExpandView CAT5?... 1 Overview 2. The multi-functional ExpandView CAT The ExpandView CAT Installation 4. Expanding the ExpandView CAT Pre-installation instructions The ExpandView... 5 The... 6 Connecting the... 6 Power supply... 6 Configuration 7. The ExpandView CAT5 configuration for a CBT application ExpandView CAT5 detailed connections The ExpandView CAT5 configuration without remote computers Operating the ExpandView CAT What is the ExpandView CAT5? The ExpandView CAT5 from Belkin broadcasts real-time high-resolution video signals to hundreds of remote display monitors. The ExpandView CAT5 consists of the following: Broadcaster + Control Unit to expand the system that connect to each remote monitor/computer Dual connects 2 monitors to the system CAT5 UTP or FTP cables connect the ExpandView CAT5. The units can be up to 110m/360ft away from the Broadcaster. This Quick Installation Guide illustrates the ExpandView CAT5 and explains how to install and operate it. Technical Specifications Technical Specifications

3 OVERVIEW OVERVIEW 2. The multi-functional ExpandView CAT5 You can use the ExpandView CAT5 in the following ways: (A) Without the Control Unit The ExpandView CAT5 constantly broadcasts a computer screen to all remote monitors. (B) With the Control Unit Broadcast a computer screen to all remote monitors Darken all remote screens Release the remote screens to allow local monitor viewing (when remote computers are connected). The screen dark function is useful when carrying out maintenance, changing the broadcast program or in a classroom environment to grab students attention. With both applications broadcast the video up to resolutions of 1600 x 75Hz depending on the cable length. 3. The ExpandView CAT5 The figures below illustrate the Broadcaster,, and Dual. Power Connector ExpandView CAT5 Control Unit Broadcaster Module System Monitor Video Cable splitter Power Connector System System cable from Broadcaster or previus 2 3

4 OVERVIEW INSTALLATION Module 4. Expanding the ExpandView CAT5 Video Cable System Picture adjuster You can expand the ExpandView CAT5 to 512 s by having 2 levels of. Level 1 can have 8 s or connected. Level 2 can have 8 s connected. (See page 7). 5. Pre-installation instructions SIDE A Monitor SIDE B Note! In the ExpandView CAT5 the CAT5 UTP or FTP cables carry electrical power. Therefore do NOT connect them to any other device. To avoid this we recommend you attach the stickers provided to the ends of each cable. Place cables away from fluorescent lights, air conditioners and machines that are likely to generate electrical noise. 6. The ExpandView CAT5 VGA video cables The is illustrated below. Connect the cable as explained. Dual Module To monitors Dual Module To s Video Card Broadcaster & To Broadcaster s or s Video In port System To monitors 4 5

5 INSTALLATION CONFIGURATION The The is only used with the when the Dongle is connected to a computer. Connecting the Please note! Connect the to the Broadcaster and s when the s are powered off. We recommend that you connect the BEFORE connecting the power supply. Power supply Connect the Broadcaster and to the power supply with the 12 VDC, 2A from the AC/DC adapter provided. The s and the Dual receive 12 VDC, 160 ma via the from the Broadcaster or. 7. The ExpandView CAT5 configuration for a CBT application The figure below illustrates the ExpandView CAT5 configuration with the ExpandView CAT5 Control Unit and the optional remote computers. The Dual has no VGA input and is therefore not suitable for CBT applications. Control Unit to s or Broadcaster Module Broadcaster to s or Level 1 to s Level 2 to s 6 7

6 CONFIGURATION CONFIGURATION 8. ExpandView CAT5 detailed connections The figure below illustrates the detailed connections of the ExpandView CAT5. Control Unit to s or 9. The ExpandView CAT5 configuration without remote computers The figure below illustrates the ExpandView CAT5 configuration without optional computers connected to the s and the Dual. Connect the Broadcaster and as in figure 1. Figure 2 illustrates the detailed connections of the. Control Unit to s or Module to Broadcaster or Broadcaster Module Broadcaster Module Broadcaster Figure 2 Dual Module to s or to s or to s to s or Broadcaster to s or to s Dual Instead of the, use the Dual Module to connect 2 screens to the Broadcaster or via CAT5 cable. The 2 screens display the images broadcast by the Broadcaster computer. to Broadcaster or Dual to s Figure 1 Figure 3 8 9

7 CONFIGURATION TECHNICAL SPECIFICATIONS 10. Operating the ExpandView CAT5 Once connected, the ExpandView CAT5 broadcasts to all remote monitors. The Control Unit The Control Unit is illustrated below SYSTEM Resolution System cable Max distance Input/Output Video Signals Sync. Up to 75 Hz CAT5 UTP or FTP 2x4x24 AWG Solid Wire Conductor cable 110m/360ft Analog signal red, green, blue 0.7v p-p 75 Ohm TTL compatible To Broadcaster s Control port Horizontal/Vertical Sync. Polarity Positive/Negative Operating temperature 0ºC to 40ºC/32ºF to 104ºF Storage temperature -40ºC to 70ºC/-40ºC to 158ºF Humidity Warranty 80% non condensing relative humidity 3 Years With the ExpandView CAT5 Control Unit carry out the following functions: Master to all Press the Master to all button to send the broadcaster s screen to all remote monitors. The LED above the button lights up. Press the button again to release the remote monitors. Dark all Press the Dark all button to darken all remote screens. The LED above the button lights up. Press the button again to release the remote screens. 11. Adjusting the picture quality Use a small screwdriver to turn the Picture adjuster on the to adjust the picture quality. BROADCASTER MODULE LINE SPLITTER REMOTE MODULE & Connectors VGA In - HDD15M System In - RJ45 System In - RJ45 Dimensions Power supply & Connectors Power supply VGA Out - HDD15F System Out - RJ45 CPU VGA - HDD15M System Out - 8 Ports RJ45 Control - MiniDin8F 175 x 96 x 42mm/ 0.57 x 0.38 x 0.14ft External Power Adapter 12VDC 2A DUAL REMOTE MODULE System In - RJ45 Screen x 2 - HDD15F From previous unit through CAT5 cable 118 x 96 x 42mm/ 0.39 x 0.38 x 0.14ft External Power Adapter 12VDC 2A Screen - HDD15F 78 x 62 x 23mm/ 0.31 x 0.26 x 0.07ft From previous unit through CAT5 cable 10 11

8 ExpandView CAT5 Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom +44 (0) (0) fax Belkin B.V. Boeing Avenue PH Schiphol-Rijk The Netherlands +31 (0) (0) fax Belkin GmbH Hanebergstraße Munich Germany +49 (0) (0) fax Belkin SAS 130 rue de Silly Boulogne-Billancourt France +33 (0) (0) fax Belkin Nordic Knarrarnäsgatan Kista Sweden +46 (0) (0) fax Belkin Iberia Avda. Cerro del Aguila San Sebastián de los Reyes Spain +34 (0) (0) fax Belkin Tech Support Europe: Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. P75110ea