Cabling Systems for Data Centers

Transcription

1 Comprehensive Cabling Platform for Data Center Environments

2 Factory-terminated and tested Due to the increasing demands on technology and capacity, the number of network connections in a Data Center is continually increasing. Irrespective of the connection type, extremely high port density supported by a scalable, modular cabling system is a critical requirement of the modern Data Center. The AMP NETCONNECT Data Center Cabling Systems provide those key features. Connectors that are terminated and tested in the factory enable you to deploy real Plug&Go solutions. Preterminated high-pair/high-fiber cable assemblies which connect to modular break-out cassettes give flexible and fast deployment of Copper and Fiber Optic solutions within the Data Center. Combined with next generation cable management and cable routing we are able to offer one of the most comprehensive product ranges for infrastructure in Data Centers. Once installed, those systems provide easy on-going management and are extremely cost-effective over the lifetime of the installation. Cabling System Infrastructure Designed for the requirements of modern Data Centers MPO High density 10/40/100 Gb/s system AMP -Link Classic Pre-terminated 1 and 10 Gb/s copper solution Secure System Optical and physical security AMPTRAC Intelligent infrastructure management MRJ21 System High densitycopper system XG 10 Gb/s for copper and fiber Lightrax Fiber routing and management AMP Hi-D Cable management platform Tyco Electronics AMP NETCONNECT is member of the Cisco Technology Developer Program as part of the program s IP Communication / Solution Enablers category. In addition, the AMP NETCONNECT MRJ21 High-Density Modular Cabling system has successfully completed interoperability testing* with the Cisco Catalyst 6500 high capacity switch. The Cisco Technology Developer Program ( unites Cisco with thirdparty developers of hardware and software to deliver tested interoperable solutions to joint customers. Members of the program share Cisco s strong commitment to customer service and satisfaction and are required to undergo interoperability testing based on criteria set forth by Cisco. With Cisco Technology Developer Program member offerings such as MRJ21 High-Density Modular Cabling Systems, customers can more quickly and efficiently deploy a broad range of Cisco Compatible business applications that can enhance the capabilities, performance, and management of their Cisco network. * The interoperability testing is designed to simulate typical customer configurations, and does not replace the need for on-site testing in conjunction with actual implementation. Enjoy Plug&Go Solutions

3 AMP Hi-D State of the Art The AMP Hi-D System is a cabling platform for your IT infrastructure. The platform embraces different kinds of products and features designed for future IT high-density solutions. In line with the desire of organisations to provide more performance in less space within their data centers whilst meeting power consumption objectives, Tyco Electronics has started to develop focused product sets for these environments. Systems that meet the design objectives of guaranteed high-density performance, seamless migration and user flexibility at a reduced power level. This provides a number of advantages. Key Facts Improved ROI compared to traditional cabling systems Improved airflow in racks and raised floors Enables reduced power consumption Permits higher density due to space saving Zero U lateral cable management The AMP Hi-D platform consists of several components which have been designed to overcome issues in cable maintenance, routing and management. AMP Hi-D products supports design and installation simplicity as well as integration into a wide range of cabinet configurations. Reduced operation cost (MAC) Airflow Dynamics The AMP Hi-D System is smart and Protection means 100% uptime saves money (ROI) Saves up to 40 % space 1

4 MPO Connector System MPO System Pre-terminated and Factory Tested Tyco Electronics AMP NETCONNECT has more than 15 years experience with MPO termination and assembly production. MPO cabling system is an excellent choice for various fiber optic applications. Modular components are the key to fast deployment, simple installation, capital effectiveness and network flexibility. Pre-terminated trunk cables, breakout cassettes and cable assemblies are the basic modular components needed for a complete network. Utilizes the high-density MT-Ferrule 12 fibers per ferrule on only 16 mm 2 Very accurate fiber positioning 10 Gb/s capability Available in OM1, OM2, OM3 or OS2 For 1 and 10 Gigabit Ethernet up to 300 m with MM For 10 Gigabit Ethernet and more future applications with SM MPO Link Configuration Each link contains 1x Trunk cable 1x Flipped cassette 1x Straight cassette 2x Panels Desired patch cords MPO Installation and Polarity In each fiber optic system, the link from source (Tx) to receiver (Rx) needs to be flipped once. In a complete MPO link this flipping is provided by one flipped cassette, while all other components in this link shall be installed as straight version. MPO cassette straight MPO Segment MPO cassette flipped 2

5 MPO Connector System Pre-terminated MPO Trunk Cable, 12 Fiber (Midi Fan-out) Factory pre-terminated assemblies Cables terminated with high density MPO connectors All cords with protocol, for constant and reliable quality In MM and SM design LSZH sheath Available in lengths up to 500 m (on request) The trunks are equipped with midi fan-out that can be clipped in CaRe-Clip Fiber 62,5/125 µm, OM1 Y X 50/125 µm, OM2 Y X 50/125 µm, OM3 (XG) Y X 9/125 µm, OS2 Y X All pairs straight (Complete link needs one component with flipped pairs!). All non-highlighted PNs have unterminated cable stocked ready for assembly (except OM1) m m m m m m m m m m m m Factory pre-terminated assemblies Cables terminated with high density MPO connectors High packing density up to 72 fibers on 1 U All cords with protocol, for constant and reliable quality In MM and SM design LSZH sheath Also available in 72 and 96 fiber count Available in lengths up to 500 m (on request) m m m m Pre-terminated MPO Trunk Cable, 24/48 Fibers m m m m Midi Fan-out to be clipped in CaRe-Clips on rare cable management bars m m m m m m m m Fiber 24 Fibers 48 Fibers 62,5/125 µm, OM1 Y X Y X 50/125 µm, OM2 Y X Y X 50/125 µm, OM3 (XG) Y X Y X 9/125 µm, OS2 Y X Y X All pairs straight (complete link needs one component with flipped pairs!). All non-highlighted PNs have unterminated cable stocked ready for assembly (except OM1). All cable assemblies delivered with pulling socks m m m m m m m m m m m m m m m m m m m m m m m m m m m m 3

6 MPO Connector System 1 U Patch Panel, Drawer, Empty, for 3 MPO Cassettes or Snap-In-Modules 1 U, 19, metal Drawer style Accommodates up to 3 MPO/MPOptimate Cassettes (see below and page 10) or Snap-In-Modules (see below) Quick release front panel Color: black (RAL 9005) Heigth Drawer panel for 3 MPO Cassettes (w/o glands & managers) 1 U Drawer panel for 3 Snap-in-Modules (w/ glands & managers) 1 U U Patch Panel, Frontplate, Empty, for 3 MPO Cassettes or Snap-In Modules 1 U, 19, metal Frontplate style Accommodates up to 3 MPO/MPOptimate Cassettes (see below and page 10) or Snap-In Modules (see below) For rear cable management bars (recommended for MPO trunks) see page 24 Color: black (RAL 9005) Heigth Frontplate panel for 3 Snap-In Modules 1 U Snap-In Blank Modules Packaging Blank modules Blank modules MPO to SC or LC Snap-In Cassettes Simple and flexible premises fiber cabling Pre-terminated cassettes with either 1 or 2 MPO trunk connections (1 x 12 or 2 x 12 fibers) at rear 6 x SC Duplex, 6 x LC Duplex or 12 x LC Duplex Easy installation, moves, adds and changes Fits in all AMP NETCONNECT patch panels for Snap-In Modules Fiber type Fiber count Pairs flipped Pairs straight MPO to SC, 62,5 µm, Multimode MPO to SC, 50 µm, Multimode MPO to SC, 50 µm, OM3, 10 GBit XG, Multimode MPO to SC, 9 µm, Singlemode MPO to LC, 62,5 µm, Multimode MPO to LC, 50 µm, Multimode MPO to LC, 50 µm, OM3, 10 GBit XG, Multimode MPO to LC, 9 µm, Singlemode MPO to LC, 62,5 µm, Multimode MPO to LC, 50 µm, Multimode MPO to LC, 50 µm, OM3, 10 GBit XG, Multimode MPO to LC, 9 µm, Singlemode

7 MPO Connector System MPO Fan-out Solution The default fiber solution is shown on page 2. MPO cables are terminated on two cassettes. This allows flexibility and single operation of fiber links. In some scenarios especially in storage area networks a high density along with less connections is preferred. For this MPO fan-out cables are available. This allows direct connections of the fan-out cables to equipment as shown on the picture. MPO Fan-out Cords Available in different lengths LSZH sheath (Fan-out cord 2 mm jacketed LSZH) For lengths 10 m: ribbon cable with 1 fan-out (on tail side) For lengths > 10 m: round cable with 2 fan-outs Configuration with other connector types on request Available with female and male MPO connectors Female MPO Male MPO MPO to 6 x MT-RJ, 62,5/125 µm, OM1 Y X Y X MPO to 6 x MT-RJ, 50/125 µm, OM2 Y X Y X MPO to 6 x MT-RJ, 50/125 µm, OM3 (XG) Y X Y X MPO to 6 x MT-RJ, 9/125 µm, OS2 Y X Y X MPO to 12 x ST-Style, 62,5/125 µm, OM1 Y X MPO to 12 x ST-Style, 50/125 µm,om3 (XG) Y X ,0 m ,0 m ,0 m ,0 m Female Male MPO to 12 x LC, 62,5/125 µm, OM1 Y X Y X MPO to 12 x LC, 50/125 µm, OM2 Y X Y X MPO to 12 x LC, 50/125 µm, OM3 (XG) Y X Y X MPO to 12 x LC, 9/125 µm, OS2 Y X Y X MPO to 12 x SC, 62,5/125 µm, OM1 Y X Y X MPO to 12 x SC, 50/125 µm, OM2 Y X Y X MPO to 12 x SC, 50/125 µm, OM3 (XG) Y X Y X MPO to 12 x SC, 9/125 µm, OS2 Y X Y X MPO Snap-In Module MPO coupler always used with on one side MPO male and other side MPO female. MPO Coupler Snap-In Module (6 ports) MPO Patch Cords Available in different lengths LSZH sheaths 2 x 5 mm outer dimensions Available in female/female and male/female version Female/Female Female/Male 62,5/125 µm, OM1 Y X Y X 50/125 µm, OM2 Y X Y X 50/125 µm, OM3 (XG) Y X Y X 9/125 µm, OS2 Y X Y X ,0 m ,0 m ,0 m ,0 m ,0 m 5

8 LWL Patch Cords Technical Specification SC Assemblies Cable sheath: LSZH Cable diameter: 2,5 mm Twin Zip Buffer: 0,9 mm EasyStrip Ferrule: Ceramic Singlemode Patchcords and Pigtails LC Assemblies SC Duplex/SC Duplex Patch Cords 50/125 µm, MM Y X 62,5/125 µm, MM Y X 9/125 µm, SM Y X 10 GBit XG, 50/125 µm, OM3, MM Y X Cable sheath: LSZH Cable diameter: 1,8 mm Mini Twin Zip Buffer: 0,6 mm Ferrule: Ceramic Connector type Tuned Insertion loss, typ. Insertion loss, max.* Return loss, min. Temp.-Range SC, PC Yes 0,15 db 0,3 db > 45 db 25 C/+70 C MPO N/A 0,75 db 1 db > 35 db 10 C/+60 C LC, PC Yes 0,1 db 0,3 db > 45 db 25 C/+70 C * against reference, ** random mated Multimode Patchcords Connector type Insertion loss, max.* Return loss, min. Temp.-Range SC, PC 0,3 db > 20 db 10 C/+60 C LC, PC 0,3 db > 20 db 10 C/+60 C MPO 0,75 db (0,5 db typ.) > 20 db 10 C/+60 C MPO (OM3) 0,5 db (0,35 db typ.) > 20 db 10 C/+60 C * against reference, ** random mated m m m m m Other lengths on request! All assemblies are factory tested and come with a test protocol. All assemblies are semi-tight cable constructions except when specially indicated. For all OM3 XG cable assemblies All assemblies are machine polished providing highest quality with controlled endface specifications. SC Duplex/LC Duplex Patch Cords 50/125 µm, MM Y X 62,5/125 µm, MM Y X 9/125 µm, SM Y X 10 GBit XG, 50/125 µm, OM3, MM Y X m m m m m Other lengths on request! LC Duplex/LC Duplex Patch Cords 50/125 µm, MM Y X 62,5/125 µm, MM Y X 9/125 µm, SM Y X 10 GBit XG, 50/125 µm, OM3, MM Y X m m m m m Other lengths on request! 6

9 MPOptimate Connector System MPOptimate System The MPOptimate system is intended for Data Center owners who are considering the implementation of structured fiber cabling in accordance with ISO/IEC, EN or TIA standards, and who are looking for the most flexible pre-terminated MPO solution. With significantly improved optical parameters, the system allows different approaches today and preparation of forthcoming high speed Data Center applications in the future. Trends such as virtualization and switch consolidation by Super-Switches can be covered easily with the MPOptimate system. The MPOptimate system is the only system on the market which is capable of covering today's and tomorrow's design and applications requirements. In particular 40 and 100 Gb/s Ethernet requires much higher precision and a tighter system approach. Each single part of the complete system is important to achieve the expected performance. The product range is a factory pre-terminated and tested solution with a high density MPO connector at its core. The system is designed for reliable and quick operations in data centers and can also be used for backbone installations in office environments. Next generation MPO system offering a migration path to 40 Gb/s and 100 Gb/s Ethernet Support 10 Gb/s channels with up to six cassettes on a length of 300 meters Insertion loss 0,35 db max. per cassette Return loss > 35 db (LC) and > 28 db (MPO) Reduced number of LAN electronics required due to power saving data center design Fully compliant with all data center standards MPOptimate Aggregation, Cross Connect Aggregation, Cross Connect Main Distribution Area Aggregation, Cross Connect MPOptimate Aggregation, Cross Connect Server, Storage Server, Storage Server, Storage MPOptimate 6 Cassette Application 7

10 MPOptimate Connector System Design in and Configuration Importance of patch cords With MPOptimate patch cords are part of the overall system performance, as all channel values are based on the use of MPOptimate patch cords. The endface geometry of the LC interface is an essential part of system performance and we have been able to improve both the insertion and the return loss. Unlike earlier days, patch cords are now needed to achieve the guaranteed values of the channel. The geometry of the interface and the resulting values for insertion and return loss have impact on the channel performance. This also applies to the warranty. Commercial MPO versus MPOptimate 10 Gb/s 40 and 100 Gb/s 6 cassettes per channel MPO MPOptimate Insertion loss max. (cassette) 1 db 0.35 db Return loss min. (MPO) 20 db 28 db (MPO) Return loss min. LC 20 db 35 db Headroom 10 Gb/s (2 cassettes), 100 m link 0.25 db 1.55 db Headroom 40/100 Gb/s (2 cassettes), 100 m link 1 db Headroom 40/100 Gb/s (4 cassettes), 100 m link 0 db Patch cords needed to achieve system performance To make the right choice insertion loss, return loss and the laser bandwidth shall be considered together. Only a generic approach allows indepence of light sources and therefore switch components. Comparison to other low loss systems Parameter Low loss System A Low loss System B MPOptimate System Max. insertion loss > 0,5 db > 0,5 db 0,35 db Return loss MPO / LC Not applicable Not applicable 28/35 db Max number of cassettes Optical values guaranteed for all 850 nm VCSEL s No No yes Fully ISO/IEC , 1 and 10 Gb/s compliant No No Yes An excellent MPO system is designed for any kind of light source on the market. This allows the customer to choose any kind of switch vendor. Other companies have optimized systems for certain light sources; the Tyco Electronics system has a generic approach. Number of interconnections and application link length with MPOptimate 2 cassettes 4 cassettes 6 cassettes 8 cassettes Fiber channel 1 Gb/s 1300 m 875 m 840 m 600 m Fiber channel 2 Gb/s 850 m 510 m 400 m 170 m Fiber channel 4 Gb/s 600 m 385 m 255 m n/a Fiber channel 8 Gb/s 550 m 150 m n/a n/a Fiber channel 10 Gb/s 640 m 400 m 160 m n/a 10 Gb/s 300 m 300 m 300 m 275 m 40/100 Gb/s 340 m 100 m n/a n/a In order to fulfill today s and tomorrow s data center requirements, the hardware is much more important than using a fiber with bandwidth higher than OM3 or bend radii optimized fibers. MPOptimate allows more flexibility in design considerations and provides a future path to 40 and 100 Gb/s. 8

11 MPOptimate Connector System MPOptimate Installation and Polarity Common Features: In each fiber optic system, the link from source (Tx) to receiver (Rx) needs to be flipped once. In a complete MPOptimate link this flipping is provided by one flipped cassette, while all other components in this link shall be installed as straight version. MPOptimate Pre-terminated Trunks Cable terminated with low loss 12 fiber MPOptimate connectors Terminated with female MPO connectors (male versions on request) OM3 cable performance, LSZH construction Connector performance: IL 0,35 db (max.); RL 28 db The trunks are equipped with midi fan-out that can be clipped in CaRe-Clip Available in 12 fiber or 24 fiber 12 fiber: L > 20 m protection tube on both sides L > 50 m protection tube on both sides; on a reel 24 fiber: L > 20 m protection tube on both sides L > 40 m protection tube on both sides, on a reel (For details see customer drawing) 1 MPOptimate trunk cable Fiber Pairs 12 Fibers (1 MPO) 24 Fibers (2 MPO) 50/125 µm, OM3 straight Y X Y X All pairs straight (Complete link needs one component with flipped pairs!). All non-highlighted PNs have unterminated cable stocked ready for assembly (except OM1). Midi Fanout to be clipped in CaRe-Clips on rare cable management bars m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m m 9

12 MPOptimate Connector System MPOptimate to SC Snap-In-Cassettes Preterminated low loss cassettes Front: 6 optimized SC duplex Back: 1 low loss MPOptimate connector Available in straight or flipped pair version Optical performance: IL 0,35 db/cassette (max.); RL 27dB Fits in AMP NETCONNECT Snap-In patch panels (see page 4) Fiber type Pairs 1 x MPO to 6 x SC duplex OM3 straight x MPO to 6 x SC duplex OM3 flipped MPOptimate to LC Snap-In-Cassettes Preterminated low loss cassettes Front: 6 or 12 optimized LC duplex Back: 1 or 2 low loss MPOptimate connector(s) Available in straight or flipped pair version Optical performance: IL 0,35 db/cassette (max); RL 27 db Fits in AMP NETCONNECT Snap-In patch panels (see page 4) Fiber type Pairs 1 x MPO to 6 x LC duplex OM3 straight x MPO to 6 x LC duplex OM3 flipped x MPO to 12 x LC duplex OM3 straight x MPO to 12 x LC duplex OM3 flipped

13 MPOptimate Connector System MPOptimate MPO Patch Cords Low loss MPOptimate MPO ribbon patch cord Terminated with female MPOptimate connectors Cable performance: OM3; LSZH construction Connector performance: IL 0,35 db (max.); RL 28 db MPO-MPO patch cord 12 fiber MPOptimate Fan-out Cords Low loss transition from MPO to LC/SC tails 2 mm Terminated with female MPOptimate connectors Cable performance: OM3; LSZH construction Optical performance: MPO connector: IL 0,35 db (max.); RL 28 db LC connector: IL 0,15 db; RL 35 db For lengths L 10 m construction with one fan-out For lengths L > 10 m construction with two fan-outs (construction details see customer drawing) Fan-out cord 1 x MPO to 12 x LC Fan-out cord 1 x MPO to 12 x SC X Y X Y X Y ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m MPOptimate LC and SC Patch Cords Patch cords with Optimized LC and SC connectors Cable performance: OM3; LSZH construction Optical performance: LC connector: IL 0,15 db; RL 35 db SC connector: IL 0,15 db; RL 35 db Patch cord LC duplex LC duplex Patch cord SC duplex SC duplex Patch cord LC duplex SC duplex X Y X Y X Y ,0 m ,0 m ,0 m ,0 m 11

14 MPO/MPOptimate Cleaning Accessories Fiber ferrule reel cleaners Reduces the number of field and test issues caused by contaminated end faces Ultra clean micro-fiber cloth captures debris and other contamination Static attraction is minimized Robust cloth does not fray or leave fibrous material behind Packaging 1 Slot Slot MT-RJ with pins MTP/MPO with pins Cleaner Refill 6 rolls MPO Coupler Cleaner To clean MPO cassettes and cables Allows cleaning of build in MPO connectors For coupling bushes and connectors Packaging MTP/MPO Cleaner MTP I.B.C Card Cleaner For cleaning of all kind of 1,25 and 2,5 mm connectors For MTRJ and MPO connectors without pins Packaging Card Cleaner Card Cleaner Refill 100 sheets Cleaning Sticks for Single Fiber Couplers For cleaning of sleeves in couplers Packaging 2,5 mm stick cleaner 5 x ,25 mm stick cleaner 5 x Note: Sleeves of the couplers shall be empty Bulkhead Cleaner SC LC MT-RJ Note: Cleaning is an essential part of MPO and any high speed fiber system. Reason is the low budget of such systems. Is the budget for 10 Gigabit Ethernet 2,55 db, is it going to be for 40 Gb/s about 1,7 db. Cleaning is part of a reliable system performance!!! 12

15 PARALIGHT Active Optical Cable Assemblies PARALIGHT Active Optical Cable Assemblies for High-Speed Interconnects Tyco Electronics PARALIGHT active optical cable assemblies use state-of-the-art technology to provide cost effective high data throughput interconnects. The cables incorporate E/O and O/E conversion built into the connector shell to yield a dramatic improvement in PCB real estate utilization. Using 850 nm VCSEL technology, the 5 Gb/s active cable assemblies will operate over a data rate of 2.5 to 5 Gb/s per lane with an aggregate data rate of 20 Gb/s. The 10 Gb/s active cable assemblies will operate over a data rate of 2.5 to 10 Gb/s per lane with an aggregate data rate of 40 Gb/s. At 5 Gb/s this provides aggregate throughput of 20 Gb/s in each direction. At 10 Gb/s this provides aggregate throughput of 40 Gb/s in each direction. They are available in lengths up to 100 meters using 50 micron fiber. Longer lengths available upon request. The EOE circuitry is designed for use with 8B/10B encoded data streams, such as InfiniBand, Fibre Channel, and XAUI. 4 transmit and 4 receive channels at 5 Gb/s and 10 Gb/s per channel Industry standard (SFF-8470) electrical connector (aka InfiniBand 4X, IB 4X, CX4*, Fibre Channel) and QSFP Connector Internally terminated optics no optical connector to clean Differential data I/O per InfiniBand version Asynchronous, internally AC coupled inputs and outputs Passively cooled design low thermal resistance heat path from chip to connector shell Small diameter cable (3.0mm) Light weight Tight bend radius * CX4 available in 5 Gb/s only. Length (meters) Cable Type s CX4*** CX4 to QSFP QSFP QSFP 5 GB/S 5 GB/S 5 GB/S 10 GB/S 2 OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* OFNP** LSZH* *LSZH = Low Smoke Zero Halogen **OFNP = Optical Fiber Nonconductive Plenum ***Also known as CX4 and SFF-8470 Note: Longer lengths are available upon request. Note: All part numbers are RoHS compliant. 13

16 Infiniband Copper Cable Assemblies Cable Assemblies Applications: High Performance Computing Clusters Supercomputers High End Servers Mass Storage Metro Network Switch/Cross Connect High End Carrier Class Routers Mechanical/Environmental: Up to 10 meters longer lengths available upon request 40 mm bend radius Operating Ambient Temperature 0 C to 60 C Storage Temperature 20 C to 85 C Materials: Jacket is 0.03 of flexible XPbT, black UL listed (type CL2) RoHS compliant Spec. Type AWG Equalized (Y/N) Length (meters) InfiniBand 4x to 4x 28 no InfiniBand 4x to 4x 28 no InfiniBand 4x to 4x 28 no InfiniBand 4x to 4x 28 yes InfiniBand 4x to 4x 28 yes InfiniBand 4x to 4x 28 yes InfiniBand 4x to 4x 28 yes InfiniBand 4x to 4x 28 yes InfiniBand 4x to 4x 24 yes InfiniBand 4x to 4x 24 yes InfiniBand 4x to 4x 24 yes InfiniBand 4x to 4x 28 no InfiniBand 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no Cx4 4x to 4x 28 no

17 Server Cabling Copper Cabling in Data Centers Copper is the preferred medium for switch and server connections. Most servers have copper connections and therefore cabling to servers needs a copper cabling system. With the introduction of global cabling standards for data center, newer data centers have a end of row design or in principle a dedicated distributor (POD). Each rack for the equipment contains copper and fiber patch panels for servers or storage devices. Tyco Electronics offers pre-terminated cabling in both copper and fiber. All systems are pre-terminated, scalable and support different customer designs.the systems support Ethernet and Fiber channel from 1 Gb/s up to 40 Gb/s. All solutions are integrated in the AMP Hi-D cabling platform for an overall professional IT-infrastructure platform. Please check page 1. AMP NETCONNECT systems can be used for: Applications: Equipment Cabling Server Cabling SAN Cabling Supports EoR-Design Supports POD-Design Ethernet Fiber Channel Infiniband Electromagnetic Environment: Shielded systems for MICE classes E 1, E 2 and E 3 Immunity against air discharge (8 kv) and contact discharge (4 kv) No separation distance to electrical devices, such as: fluorescent lamps power cable mobile phones and walkie-talkies Speed: 1 and 10 Gigabit Ethernet 40 Gigabit Ethernet* Sigma Link Copper or Fiber Patch Panel Server, Storage Copper or Fiber Patch Panel Server, Storage Consolidation point cabling MRJ21 rear cabling Copper or Fiber Patch Panel Server, Storage Trunk Cables Copper or Fiber Patch Panel Server, Storage Horizonal Distribution Area Standard compliant equipment cabling MICE Classes: International standard bodies have recognized the importance of the environment when designing cabling systems. To underline the importance ISO/IEC has released the TR 29106:2007 paper. The content of this paper is being used in more and more standards such as ISO/IEC 11801, EN and TIA 569-C. In the TR 29106:2007 paper are three defined classes. The classes have been named MICE and have the following meaning: Mechanical Ingress Climatic Electromagnetic Class 3 has the highest requirement while Class 1 has the lowest one. For copper cabling systems the electromagnetic behavior is directly related to the technology. The global parameter is coupling attenuation, which is a kind of EMC factor. Data Center belongs to Class E 2, for flawless and reliable services in the data center. Copper cabling systems shall comply in all disciplines to E 2 specifications as there are many different electrical systems in a small area. Independent tests have shown that devices such as fluorescent lamps, power cabling, wireless devices may have an impact. This is particularly true for UTP cabling systems supporting 10 Gigabit Ethernet applications. The XG and XG A systems from Tyco Electronics fulfil the E 1, E 2 and E 3 requirements and provide highest availability with consistently high margins. * With Class FA system up to 50 m, based on current studies. Length and capability depend on final definition by IEEE 802.3ba. 15

18 MRJ21 Connector System MRJ21 System The MRJ21 system is a high-density, high-performance modular system. The Tyco Electronics solution is designed to deliver multiple Gigabit Ethernet ports in a high-density package that fully supports PoE. The 24 pair cabling and connector solution supports any Plug&Play environment including Data Centers. MRJ21 trunk cables, cassettes and assemblies are the basic components of this modular connectivity solution. 10/100 MBit/s 1 Gigabit Ethernet Factory tested 48 Ports, 1 U AMPTRAC Ready! BER tested Application: Equipment Cabling Server Cabling SAN Cabling Supports EoR-Design Supports POD-Design Only a pre-terminated system allows moves, adds and changes in the short time scales usually allowed in Data Centers. This solution allows the installation of % more ports than a conventional solution. MRJ21 Card Switch with MRJ21 MRJ21 in a main distribution area MRJ21 switch MRJ21 System Configuration How it works: Cables are pre-terminated in the factory to the correct length with high-density connectivity Place or pull the cables into pathways Plug in the MRJ21 connectors and finish links with patch cords as necessary MRJ21 can be directly plugged into end equipment with high-density interfaces 16

19 MRJ21 Connector System MRJ21 Snap-In Cassette, Unshielded High-performance TP cabling for guaranteed application performance High-density, small form factor connectivity Factory terminated and tested solution Modular, pluggable solution Application specific cassettes For rear cable management bars see page 26 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports Snap-In cassette for 100Base-T Snap-In cassette for 1000Base-T frontplate panel 1 U for 3 cassettes AMP Hi-D MRJ21 Angled Patch Panel High-performance TP cabling for guaranteed application performance High-density, small form factor copper connector interface Angled panel with 48 ports on 1 U Factory terminated and tested solution Modular, pluggable solution For rear cable management bars see page 26 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports AMP Hi-D MRJ21 panel for 1000Base-T MRJ21 Patch Panel, 1 U, Angled High-performance TP cabling for guaranteed application performance High-density, small form factor copper connector interface Angled panel with 48 ports on 1 U (protrusion: 140 mm) Available with AMPTRAC functionality Factory terminated and tested solution Modular, pluggable solution For rear cable management bars see page 26 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports Standard angled panel for 1000Base-T MRJ21 Patch Panel, 1 U, Straight, Unshielded High-performance copper cabling for guaranteed application performance High-density, small form factor copper connector interface Straight panel with 24 or 48 ports on 1 U Available with AMPTRAC functionality Factory terminated and tested solution Modular, pluggable solution For rear cable management bars see page 26 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports Standard straight panel for 1000Base-T Standard straight panel for 100Base-T Standard straight panel for 1000Base-T

20 MRJ21 Connector System MRJ21 to MRJ21 Cable Assemblies, Unshielded Factory terminated and tested solution Modular, pluggable solution Dense CHAMP style double blade design with offset jackscrew Contact layout and footprint for differential pairs creates reduced crosstalk and built-in compension 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45) 3 times the port density of an RJ-21 Jackscrew for positive latching and secure cable retention Color: grey MRJ21 to MRJ21, 180 back shell Y X MRJ21 to RJ-21 Cable Assemblies, Unshielded Factory terminated and tested solution Modular, pluggable solution Dense CHAMP style double blade design with offset screw fixing Contact layout and footprint for differential pairs creates reduced crosstalk and built-in compensation 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45) Jackscrews for positive latching and secure cable retention Color: grey ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m Other lengths on request! MRJ21 to RJ-21, 180 back shell Y X ,0 m ,0 m ,0 m ,0 m ,0 m Other lengths on request! ,0 m ,0 m ,0 m ,0 m MRJ21 Fan-out Cable to Multiple RJ-45 Plugs Factory terminated and tested solution Modular, pluggable solution Dense CHAMP style double blade design with offset screw fixing Contact layout and footprint for differential pairs creates reduced crosstalk and built-in compensation 3 times the port density of an RJ-21 Jackscrews for positive latching and secure cable retention Color: grey MRJ21 to 6 RJ-45 for 1000Base-T, 180 back shell MRJ21 to 12 RJ-45 for 100Base-T, 180 back shell Y X Y X ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m Other lengths on request! 18

21 MRJ21 Connector System MRJ21 Snap-In Cassette, Shielded High performance TP Cabling for guaranteed application performance High-density, small form factor connectivity Factory terminated and tested solution Modular, pluggable solution Application specific cassettes Frontplate includes cassette bonding fastener For rear cable management bars see page 25 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports Snap-In Cassette shielded for 1000Base-T Snap-In Cassette shielded for 100Base-T frontplate panel 1 U for 3 cassettes AMP Hi-D MRJ21 Angled Patch Panel High-performance TP cabling for guaranteed application performance High-density, small form factor copper connector interface Angled panel with 48 ports on 1 U Factory terminated and tested solution Modular, pluggable solution For rear cable management bars see page 25 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports AMP Hi-D MRJ21 panel for 1000Base-T MRJ21 Patch Panel, 1 U, Straight, Shielded High performance TP Cabling for guaranteed application performance High-density, small form factor copper connector interface Factory terminated and tested solution Straight panel with 48 ports on 1 U Modular pluggable solution Available with AMPTRAC functionality For rear cable management bars see page 25 Color: black (RAL 9005) MRJ21 Plugs RJ-45 Ports Standard straight panel for 1000 Base-T User friendly field installable 1 Gbs solution Enhanced screening and improved EMC Factory terminated and 100 % tested solution Dense double blade connector with offset jackscrews for latching 1,5 to 4 times the port density of 2 x 6 Stacked Mod Jack (RJ-45) 24 pair shielded cable with AWG 24 solid conductors LSZH sheath Color: white MRJ21 to MRJ21 Cable Assemblies, Shielded MRJ21 to MRJ21, back shell MRJ21 to MRJ21, back shell Y X Y X ,0 m ,0 m ,0 m ,0 m ,0 m Other lengths on request! ,0 m ,0 m ,0 m ,0 m 19

22 AMP Sigma-Link System Sigma-Link System Introduction The AMP Sigma-Link Classic is a pre-terminated, fast and easy to install cabling solution for high speed applications. Performance is ensured by 100% factory testing of all AMP Sigma-Link Classic cable assemblies. The far end can be traced by an integrated plastic optical fiber (POF) for easy identification after installation. The system is designed for reliable and quick operation in Data Centers. All components fully comply to TIA/EIA 942 and EN , the Data Center specific standards. The system can be used in Data Centers for equipment cabling such as from server to cabling distributors or cross connects. For smaller Data Centers the system can even act as a server to switch cabling solution with the upgrade patch to 40 Gb/s. Another application is for open office applications where multiple distribution points in a raised floor or ceiling are needed. Key Facts: Fully supports 1 and 10 Gb/s over copper with high margins Cat. 6 A/Class E A and Cat. 7 A/Class F A performance Modular solution features reusable cassettes and cables Part of the AMP Hi-D cabling platform Class F A / Cat. 7 A capable for 40 Gb/s Allows any length from 2 90 m 10 Gb/s over copper without any ANEXT testing and EMC consideration Applicable for MICE E 1, E 2 and E 3 environment Application: Equipment Cabling Server Cabling SAN Cabling Supports EoR-Design Supports POD-Design Main distribution to horizontal distribution cabling Additional features: Automatic bonding The Sigma-Link system contains an integrated automatic bonding system compliant as described in EN and the forthcoming TIA 607 standard. If the mounting frame is not painted, the channel is designed to bond automatically. In the case of painted frames, each panel contains an earthing bold. On site channel tracking Cassette-to-cassette trunk cables contains a POF fiber for easy tracking in the field. This is excellent during installation and also for troubleshooting. 20

23 AMP Sigma-Link System System Features Factory pre-terminated high-efficiency solution 24 connections per 1 U, 6-port links Lengths 2 90 meter 100% factory tested Integrated Plastic Optical Fiber (POF) in cassette-to-cassette version to trace/detect far-end Available in 3 different options: cassette to cassette connection cassette to jack connection cassette to open end Bundle of 6 x 4 pair solid Cat. 7 S/FTP cable, LSFRZH Sheath AMP-TWIST 6S SL jacks Cassette to cassette with POF Cassette to jack AMP Sigma-Link Classic Cable Assemblies, Class E A Bundle of 6 x 4 pair solid Cat. 7 A S/FTP cable (compliant to IEC ), LSFRZH Sheath AMP-TWIST 7A S SL jacks Cassette to cassette with POF Cassette to jack Cassette to open end AMP Sigma-Link Classic Cable Assemblies, Class E A Cassette to open end Y X Y X Y X Y X Y X Y X ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m AMP Sigma-Link Classic Cable Assemblies, Class E Bundle of 6 x 4 pair solid Cat. 6 U/UTP cable, LSZH Sheath Cat. 6 RJ-45 SL jacks Cassette to cassette with POF Cassette to jack Cassette to open end Y X Y X Y X ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m ,0 m AMP Sigma-Link Classic Patch Panel 19 1 U unloaded panel to be equipped with -Link Classic Cassettes Angled and flush style panels available AMP Sigma-Link Classic Hi-D patch panel AMP Sigma-Link Classic Flush patch panel

24 AMP Hi-D 19 Panels / Ducts System Features A complete cabling platform needs the right tools and accessories. The AMP Hi-D cabling platform contains all necessary items to address issues such as improvement of airflow, open frames and more. AMP Hi-D 1 U Blind Panel 1 U blind panels Angled version to leave a space in between AMP Hi-D panels Straight version to fill space between AMP Hi-D panels and straight panels or active equipment AMP Hi-D 1 U blind panel angled AMP Hi-D blind panel (straight) The design of the pass through ducts features a hinged cover that ensures the stored patch cords are always accessible and maintains flexibility and ease of MAC operations. The pass through duct allows left to right side patching as well as front to back patching and intra-cabinet patching. 2 height units, 19, metal Hingeable front cover Patchcords are always accessible Feed through holes provided for organized management of patch cords from front to back AMP Hi-D 2 U Pass Through Duct AMP Hi-D 2 U pass through duct

25 AMP Hi-D Rack System AMP Hi-D 19 2 and 4 Post Racks 45 U on 2200 mm height High strength aluminum construction Universal 19 EIA hole pattern including unit identification Color: black (RAL 9005) Thread AMP Hi-D 19 2 post rack Metric AMP Hi-D 19 2 post rack UNC AMP Hi-D 19 4 post rack Metric AMP Hi-D 19 4 post rack UNC AMP Hi-D Cable Ducts 45 U on 2200 mm height Cable duct available in left and right versions Versions with 1 or 2 doors available Doors can be ordered separately Key lockable Cable managers included Color: black (RAL 9005) AMP Hi-D 6" Cable Duct Left AMP Hi-D 6" Cable Duct Right AMP Hi-D 8" Cable Duct Left AMP Hi-D 8" Cable Duct Right AMP Hi-D 12" Cable Duct AMP Hi-D 12" Cable Duct Left AMP Hi-D 12" Cable Duct Right Y Y Y Y Y Y Y AMP Hi-D 6" Door Left AMP Hi-D 6" Door Right AMP Hi-D 8" Door Left AMP Hi-D 8" Door Right AMP Hi-D 12" Door Left AMP Hi-D 12" Door Right AMP Hi-D 12" Door Y- Doors AMP Hi-D Central Doors Key lockable Closed cabinet look Vented version available Color: black (RAL 9005) AMP Hi-D central doors AMP Hi-D central doors vented

26 AMP Hi-D Rack System AMP Hi-D Raised Floor Kit Ensures a stable construction Can be used below raised floors Suitable for 2 & 4 post racks AMP Hi-D Cable Managers AMP Hi-D raised floor kit ( mm) AMP Hi-D raised floor kit ( mm) AMP Hi-D raised floor kit ( mm) AMP Hi-D raised floor kit ( mm) U fixed style rack mount Designed to be used in 4-Post Racks Can accept electronic equipment up to 300 kg Bracket or shelf version available Color: black (RAL 9005) AMP Hi-D Heavy Duty Fixed Brackets / Shelf AMP Hi-D Heavy Duty Fixed Bracket AMP Hi-D Heavy Duty Fixed Shelf Bend controlled exit of patchcords acc. to EN & ISO/IEC table 25 Re-openable cover for ease of MAC-operations Stressless cable holding eliminates radial compression of cables Suitable for twisted pair & fiber optic patch cords For cabinet mounting only AMP Hi-D 1 U cable managers AMP Hi-D 2 U cable managers AMP Hi-D 6 U cable managers AMP Hi-D 15 U cable managers AMP Hi-D cable manager clip MRJ21 Cable Guiding Shelf 19" 4 U shelf with 16 vertical slots Each slot accepts max. 8 stacks of MRJ21 cable assemblies Tie down possibilities at the back of the shelf Color: black (RAL 9005) 24 MRJ21 Cable Guiding Shelf

27 AMP Hi-D Rack System AMP Hi-D Fiber Organizer Drum Plate Designed to handle fiber optic patch cords overlength Can be used in 8" and 12" cable ducts Dimensions: 188,5 x 16 x 8 cm (H x D x W) Drums can be removed and replaced to fullfill customer needs Color: black (RAL 9005) Subfloor Panel Holder Kit AMP Hi-D fiber organizer drum plate Fully flexible system for installing 19 patch panels underneath the racks in the false floor area Pedestals distance max. 630 mm The clamping range varies from 14 mm up to 30 mm Pedestal shape can be round or square Height Subfloor Panel Holder Kit Subfloor Panel Holder Kit Subfloor Panel Holder Kit AMP Hi-D Rack Top Cable Trough The Hi-D rack top cable trough ensures easy guiding and routing of patchcords from one rack to an adjacent rack. Cable fixing possible using velcro cable ties. AMP Hi-D rack top cable trough Accessories Velcro Cable Ties AMP Hi-D 1 x 8 (10 pcs.) AMP Hi-D 1 x 12 (10 pcs.) Mounting Hardware Screw set (50 pcs) M Screw set (500 pcs) M Screw set (50 pcs) UNC Screw set (500 pcs) UNC Screw set (50 pcs) M6 + cage nuts Screw set (500 pcs) M6 + cage nuts UNC M6 M6 + Cage Nuts 25

28 AMP Hi-D Rack System MPO Back Cable Manager 19, 1 U rear cable management bar Used for MPO front panels 3 depths available Applications include new installation and retrofit Rear or front of rack or cabinet mount Color: black (RAL 9005) MRJ21 Back Cable Manager Cable Management Bar 100 mm depth Cable Management Bar 175 mm depth Cable Management Bar 275 mm depth , 1 U rear cable management bar Used for MRJ21 or other high density copper or fiber optic panels Simple on site assembly Applications include new installation and retrofit Rear or front of rack or cabinet mount 4 depths available Tie-down capability on side brackets and back tie-down bar Tie-down bar is adjustable for horizontal or vertical cable strain relief Color: black (RAL 9005) Back Cable Manager 6 (150 mm) depth Back Cable Manager 9 (230 mm) depth Back Cable Manager 12 (300 mm) depth Back Cable Manager 16 (400 mm) depth U Cable Management Panels 19 Product Facts Panels mount to the front of 19 racks and provide for the orderly dressing and routing of cable assemblies Various ring lengths available 1 U high Color Ring length 5 rings black (RAL 9005) 95 mm rings light grey (RAL 7035) 60 mm rings light grey (RAL 7035) 80 mm rings black (RAL 9005) 60 mm

29 AMP Hi-D Rack System Technical Specification Foot Print Capacity Study Back Channel Area Front Channel Area Front View Cable Type Cable AMP Hi-D 12 Cable Duct AMP Hi-D 6 Cable Duct Max. used U Diameter 300 (W) x 260 (D) 150 (W) x 260 (D) Cat. 5E UTP 5,1 mm Cat. 5E FTP 6,2 mm Cat. 5E S/FTP 6,5 mm Cat. 6 UTP 5,7 mm Cat. 6 FTP 7,6 mm Cat. 6 PIMF C 250 7,4 mm Cat. 7 PiMF C 600 7,0 mm Cat. 7 PiMF 600 7,8 mm Cat. 7 PiMF ,1 mm MRJ21 UTP Cat. 5E +/ 12,0 mm Patch Cord Type Cable AMP Hi-D 12 Cable Duct AMP Hi-D 6 Cable Duct Max. used U Diameter 300 (W) x 260 (D) 150 (W) x 260 (D) Cat. 5E ø 5,2 5,6 mm Cat. 6 ø 5,3 5,9 mm Note: capacities are based upon a fill rate of 100% vs the max used U Fill Capacity of AMP Hi-D Cable Ducts Cable Type AMP Hi-D 12 Cable Duct AMP Hi-D 8 Cable Duct AMP Hi-D 6 Cable Duct Cable Back Channel Area Max. Back Channel Area Max. Back Channel Area Max. Diameter (mm 2 ) 40% Fill Rate (mm 2 ) 40% Fill Rate (mm 2 ) 40% Fill Rate Cat. 5E UTP 5,1 mm Cat. 5E FTP 6,2 mm Cat. 5E S/FTP 6,5 mm Cat. 6 UTP 5,7 mm Cat. 6 FTP 7,6 mm Cat. 6 PIMF C 250 7,4 mm Cat. 7 PiMF C 600 7,0 mm Cat. 7 PiMF 600 7,8 mm Cat. 7 PiMF ,1 mm Patch Cord Type AMP Hi-D 12 Cable Duct AMP Hi-D 12 Cable Duct AMP Hi-D 6 Cable Duct Cable Front Channel Area Cables Front Channel Area Cables Front Channel Area Cables Diameter (mm 2 )* (mm 2 )* (mm 2 )* Cat. 5E 5,2 5,6 mm Cat. 6 5,3 5,9 mm Note: capacities are based upon a fill rate of 40% according to ANSI/TIA/EIA-569-B * See footprint under Technical Specifications 27

30 Copper Patch Cords Cat. 6 Patch Cord RJ-45 LSZH Category 6 according to ISO/IEC nd Ed. and EN Pair stranded U/UTP cable LSZH sheath Color-matched snagless boots TIA/EIA T568B wiring Color white black blue grey yellow red green Cat. 6 PiMF 600 Patch Cord 4 Pair stranded S/FTP cable LSZH sheath Color-matched snagless boots Universal B-wiring Color white black blue grey yellow red green Y X Y X Y X Y X Y X Y X Y X Y X Y X Y X Y X Y X Y X Y X ,5 m ,0 m ,0 m ,0 m ,0 m ,0 m For other patch cord lengt, colors and versions please refer to the AMP NETCONNECT EMEA Product Catalog ,5 m ,0 m ,0 m ,0 m ,0 m ,0 m For other patch cord lengt, colors and versions please refer to the AMP NETCONNECT EMEA Product Catalog. 28

31 Lightrax Fiber Optic Raceway System Introduction Fiber Routing is an Essential Part The Lightrax fiber optic raceway system is a fully enclosed ducting system that segregates, routes and protects fiber optic cables and jumpers from the point of building entry to the fiber termination and distribution equipment. Protects your fiber performance No bend radii issues For Multi- and Singlemode fibers Channels Channel length is 2,0 m Haircell textured surface Solid and slotted channels available All channels provided with cover Velcro facilitates easy access to patchcords Style 4 x 4 channel with cover Solid F x 4 channel with cover Slotted D Elbow Creates an angle 45 or 90 from a straight horizontal run Haircell textured surface All elbows provided with cover Velcro facilitates easy access to patchcords Angle Direction 4 x 4 horizontal elbow 45 D x 4 vertical elbow 45 inside up A x 4 vertical elbow 45 outside down F x 4 horizontal elbow 90 E x 4 vertical elbow 90 inside up F x 4 vertical elbow 90 outside down C way Cross Creates a horizontal 4-way cross intersection Haircell textured surface Cover included Velcro facilitates easy access to patchcords 4 x 4 4-way cross F

32 Lightrax Fiber Optic Raceway System Tee Creates a 90 horizontal or vertical branch from straight horizontal runs Haircell textured surface Cover included Velcro facilitates easy access to patch cords Direction 4 x 4 tee Horizontal C x 4 tee Vertical F Quick Drop Can fit on the duct or in the duct Haircell textured surface Cover included Max capacity: 100 (3 mm patch cords) Quick drop full cover D Quick drop modified cover A Channel & Fitting Accessories Haircell textured surface 4 x 4 channel splice A x 4 fitting splice D x 4 end cap D x 4 trumpet F x 4 slotted channel trumpet flare F

33 Lightrax Fiber Optic Raceway System Flex Tubing and Accessories Split Flex Tubing provides a vertical pathway to the equipment Adaptors for 10 and 20 flex tubes Packaging 1 split flex tubing 12,5 m 1 C split flex tubing 12,5 m 1 F square to dual round adaptor 1 E Anchor clamp for 2 tube 10 CC Anchor clamp for 1 tube 10 CC Adaptor to two 1 flextubes 1 D Adaptor to one 2 flextube 1 D Hardware & Mounting Kits Suitable for M14 and M16 threaded rods Threaded rod purchased separately Brackets are recommended every 900 mm for direct channel mounting Packaging Hardware kit 200 C or 4 ladder rack mounting kit 5 CC or 4 offset ladder rack mounting kit 5 CC end-accessible threaded rod kit saddle bracket equipment rack horizontal mounting kit equipment rack vertical mounting kit hanger bracket 5 C side wall support 5 C Installation Tools Easy positioning of holes in duct Slides over the ducts Quick Drop template to be used when installation in the duct Drilling template E Quick drop template A

34 Intelligent Infrastructure Management ITIL (IT infrastructure Library) Successful IT increasingly depends on cooperation between different services and competencies within the IT department. In order to control these combined IT services, so-called IT processes have been developed and collected as ITIL (IT Infrastructure Library), a framework of best practices for IT processes. As a vital part of ITIL, IT Service Management is recognized as the central organizational instrument for aligning IT with business processes and for controlling IT services according to customer needs. Configuration Management Enhancement using AMPTRAC AMPTRAC fully supports ITIL The overall purpose of the Configuration Management Database (CMDB) is to collect data about all assets and configurations and to offer this information to other IT processes. Hence, the CMDB is a logical image of the IT infrastructure. AMPTRAC supports the CMDB by adding real-time connectivity and networking device information. Tracing Virtualization AMPTRAC's VM support allows tracking and monitoring of virtual machines and their physical hosts. It offers more control over peripheral network devices. It identifies, tracks, and documents the logical configuration and physical location of VMs. And it helps data center customers keep track of IT equipment and cabling in virtual networks. Plus, it supports troubleshooting and simplifies move add change activity. Real-time Overview & Documentation In many industries data network down time is business critical! Depending on the importance of the network as a daily business tool, hourly costs can be extremely high (e.g. in banking and insurance, airports, ISP's, etc.). The solution: accurate, reliable documentation by AMPTRAC helps recovery from any problem as quickly as possible by greatly reducing the debugging time. 32

35 Further Reading Field Installable Copper and Fiber Solutions Tyco Electronics also provide traditional field installable AMP NETCONNECT fiber and copper solutions according to the latest performance standards. Using patented termination techniques our field installable connectors can be terminated within 1 to 2 minutes. Literature No Literature No Literature No Literature No A complete Product Range