ARS 20, ARS 25: Single-turn Absolute Encoders. Modular Design for tailor-made solutions.

Size: px
Start display at page:

Download "ARS 20, ARS 25: Single-turn Absolute Encoders. Modular Design for tailor-made solutions."

Transcription

1 , : ingle-turn bsolute Encoders. Modular Design for tailor-made solutions. Maximum reliability as a result of opto-ics with Chip-on-Board technology quare flange, servo and face mount options with 1/4, 3/8 and 1 mm solid shafts. D a t a h e e t Whether with square flange, servo flange with connector or cable outlet, I or Parallel interface / single-turn absolute encoders will meet virtually any application profile. Number of steps to 3,768 bsolute Encoder ingle-turn CCoreTech technology permits tailor-made solutions for every application, due to its modular design. / single-turn absolute encoders are available with any desired number of steps between and 3,768. urther highlights of this generation of encoders: imple zero adjustment remotely via a signal line. Excellent price/performance ratio Long LED lifetime as a result of automatic light regulation Thanks to this wide variety of products, there are numerous possible uses, for example in: machine tools textile machines woodworking machines packaging machines ev..7

2 ingle-turn bsolute Encoder I and Parallel Number of steps to 3,768 bsolute Encoder ingle-turn Dimensional Drawing quare lange Mount.6 (.3) 1.7 (44.4).1 (3.) (46.77) n Connector or cable outlet n Protection class up to IP 66 n Electrical Interfaces I or Parallel n Zero adjustment via a remote line.6 (.3) 1.7 (44.4) 1.49 (31.7) 1.47 (31.67).16 (3.96) Dia. Thru (4) Places. (6.3).96 (6.94) Max. (.8) Dimensional Drawing ervo lange Mount #6-3 UNC-B Thread x.1 (3.81) Min. ull Thread (4) Holes 9 part on a 1.6 (41.8) Dia. B.C..1 (.4) (46.77).6 (.3). (.8) 1.8 (46.99) 1.49 (31.7) 1.47 (31.67). (.8).1 (.4). (1.7).96 (6.94) Max Dimensional Drawing haft Options 1. (.4) 1. (.4).87 (.1).84 (1.34).3749 (9.).3744 (9.1).7 (19.).3749 (9.).3744 (9.1).487 (6.3).497 (6.34).393 (9.99).396 (9.97) ccessories Connection systems Mounting systems dapter modules.34 (8.64).88 (.3) 3/8" w/lat.88 (.3) 3/8".7 (19.) 1/4.7 (18.9) 1mm ICK-TEGMNN

3 Technical data olid shaft diameter 1/4", 3/8", 1mm Number of steps per revolution 3,768 Electrical interfaces I +-6 V Open Collector + V TTL +1-3 V Push-Pull Mass 1) pprox.. lb (. kg) Moment of inertia of the rotor.184 lb-in (4 g-cm ) Code direction ) CW Measurement range 1 revolution Measuring step 36 /number of steps epeatability. Error limits binary number of steps.3 non-binary number of steps.46 Measuring step deviation binary number of steps. non-binary number of steps.16 Measured value backlash. esponse threshold.3 Max. angular acceleration x 1 rad/s Max. operating speed with shaft seal 6, rpm without shaft seal 1, rpm Operating torque. lbf-in (.6 Ncm) tart up torque.3 lbf-in (3.4 Ncm) Permissible shaft loading radial 4. lbf ( N) axial. lbf (1 N) Bearing lifetime 3.6 x 1 9 revolutions Working temperature range ( - 8 C) torage temperature range -4 1 (-4 1 C) Permissible relative humidity 3) 9 % EMC 4) esistance to shocks ) /11 g/ms to vibration 6) /1 1 g/hz Protection class acc. IEC 69 connector outlet 7) IP 6 cable outlet IP 66 Operating voltage range (+Vs) I 1 3 V Open Collector 8 4 V TTL 4.7. V Push-Pull 1 3 V Operating current I/Parallel Typ. 6/9 m witching level of the control inputs Logic H =.7 x Vs Logic L = V.3 x Vs Operation of zero-set 8) 1 ms Initialization time after power on 4 ms 1) 4) or an encoder with connector outlet To DIN EN ) Increasing when viewing the and DIN EN ) clockwise rotating shaft To DIN EN ) Condensation not permitted 6) To DIN EN ) With mating connector fitted 8) Only with shaft stationary (note initialization time) ICK-TEGMNN

4 ingle-turn bsolute Encoder I and Parallel Order information I Interface Point 1 Electrical Interface i 1 3 V I Gray = i 1 3 V I Gray Capped = B Mechanical Interface Connection quare lange, 1/4 haft = E adial Connector (M3, 1 pin) = quare lange, 3/8 haft = adial Cable 1. m = quare lange,, adial Cable 1. m = K 3/8 haft with lat = G adial Cable 3. m = L quare lange, 1 mm haft = C adial Cable. m = M ervo lange/ace Holes, adial Cable 1. m = N 1/4 shaft = ervo lange/ace Holes, 3/8 shaft = 6 ervo lange/ace Holes, 3/8 shaft w/ flat = 7 ervo lange/ace Holes, 1 mm shaft = 8 esolution ny number of steps from up to 3,768 possible. lways characters in clear text. Order example: ingle-turn bsolute Encoder I 1 3 V, I, Gray; quare lange; 3/8 shaft; 1-pin, radial, number of steps: 819 Point Please enter your individual encoder here Point 1 Point 1 Point 1 ICK-TEGMNN

5 Order information Parallel Interface Point 1 Electrical Interface Mechanical Interface Connection esolution i 1 3 V Par Gray = quare lange, 1/4 haft = E adial Cable 1. m = ny number of steps from up i 1 3 V Par Gray Capped = G quare lange, 3/8 haft = adial Cable 1. m = K to 3,768 possible, with the following 1 3 V Par Binary = H 1 3 V Par BCD = J, 8 4 V, Open Collector 1, Gray = 8 4 V, Open Collector 1, Gray Capped = V, Open Collector 1, Binary = V, = Open B Collector 1, BCD = V, TTL (747) = B Gray = 6 V, TTL (747) Gray Capped = 7 V, TTL (747) Binary = 8 quare lange, 3/8 haft with lat = G quare lange, 1mm haft = C ervo lange/ace Holes, 1/4 shaft = ervo lange/ace Holes, 3/8 shaft = 6 ervo lange/ace Holes, 3/8 shaft w/ flat = 7 adial Cable 3. m = L adial Cable. m = M adial Cable 1. m = N adial Connector (M 3 pin) = 4 adial Connector (M 19 pin) = electrical interfaces: 1 3 V, parallel, Gray 1 3 V, parallel, Gray Excess 1 3 V, parallel, BIN Number of steps from up to 8 possible, with the electrical interface: 1 3 V, parallel, BCD lways characters in clear text. V, TTL (747) = B BCD = 9 1) Open Collector (747) ervo lange/ace Holes, 1 mm shaft = 8 Order example: ingle-turn bsolute Encoder Parallel 1 3 V, Push-Pull, Gray; quare lange; 3/8 shaft; 3-pin, radial, number of steps: 819 Point Please enter your individual encoder here Point 1 Point 1 Point 1 ICK-TEGMNN

6 bsolute ingle-turn Encoder Number of steps to 3,768 bsolute Encoder ingle-turn Dimensional Drawing quare lange Mount 3.8 (96.) Max.. (63.) Max. 8-3 UNC-B x.18 (4.7) Min. ull Threads (3) Places 1 part on 1.87 (47.63) Dia. B.C..6 (66.).6 (.3) n Connector or cable outlet n Protection class up to IP 66 n Electrical Interfaces I or Parallel n Zero adjustment via a remote line Ø.6 (66.4) Max. Ø4. (13.68) Max..3 (7.6) 1.49 (31.74) 1. (31.7) Ø.1 (.33) (4) Holes.6 (66.).6 (.3) Dimensional Drawing ervo lange Mount/ace Mount 3.3 (83.8).3 (8.4).1 (.4) #8-3 UNC-B.188 (4.74) Min. Deep ull Threads (3) Places 1 part on 1.87 (47.63) Dia. B.C..6 (6.).31 (8.67) 1.49 (31.74) 1. (31.7).6 (67.31) Max..1 (.4).3 (7.6). (63.) Dimensional Drawing haft Options 1.18 (9.97).88 (.3).7 (19.) 1.18 (9.97).88 (.3) 1. (6.67).7 (19.) 1. (.91).7 (18.39) ccessories Connection systems Mounting systems dapter modules.34 (8.64).3749 (9.).3744 (9.1).3749 (9.).3744 (9.1) /8" w/lat 3/8" 1/4 (6.3) (6.34).393 (9.99).396 (9.97) 1 mm 6 ICK-TEGMNN

7 Technical data olid shaft diameter 1/4", 3/8", 1mm Number of steps per revolution 3,768 Electrical interfaces I +-6 V Open Collector + V TTL +1-3 V Push-Pull Mass 1) pprox..7 lb (.3 kg) Moment of inertia of the rotor.184 lb-in (4 g-cm ) Code direction ) CW Measurement range 1 revolution Measuring step 36 /number of steps epeatability. Error limits binary number of steps.3 non-binary number of steps.46 Measuring step deviation binary number of steps. non-binary number of steps.16 Measured value backlash. esponse threshold.3 Max. angular acceleration x 1 rad/s Max. operating speed with shaft seal 6, rpm without shaft seal 1, rpm Operating torque. lbf-in (.6 Ncm) tart up torque.3 lbf-in (3.4 Ncm) Permissible shaft loading radial 4. lbf ( N) axial. lbf (1 N) Bearing lifetime 3.6 x 1 9 revolutions Working temperature range ( - 8 C) torage temperature range -4 1 (-4 1 C) Permissible relative humidity 3) 9 % EMC 4) esistance to shocks ) /11 g/ms to vibration 6) /1 1 g/hz Protection class acc. IEC 69 connector outlet 7) IP 6 cable outlet IP 66 Operating voltage range (+Vs) I 1 3 V Open Collector 8 4 V TTL 4.7. V Push-Pull 1 3 V Operating current I/Parallel Typ. 6/9 m witching level of the control inputs Logic H =.7 x Vs Logic L = V.3 x Vs Operation of zero-set 8) 1 ms Initialization time after power on 4 ms 1) 4) or an encoder with connector outlet To DIN EN ) Increasing when viewing the and DIN EN ) clockwise rotating shaft To DIN EN ) Condensation not permitted 6) To DIN EN ) With mating connector fitted 8) Only with shaft stationary (note initialization time) ICK-TEGMNN

8 ingle-turn bsolute Encoder Order information I Interface Point 1 Electrical Interface i 1 3 V I Gray = i 1 3 V I Gray Capped = B Mechanical Interface quare lange, 1/4 haft quare lange, 3/8 haft = E = quare lange, 3/8 haft with lat = G quare lange, 1 mm haft = C ervo lange/ace Holes, 1/4 shaft = ervo lange/ace Holes, 3/8 shaft = 6 ervo lange/ace Holes, 3/8 shaft w/ flat = 7 ervo lange/ace Holes, 1 mm shaft = 8 Connection adial Connector (M3, 1 pin) = xial Connector (M3, 1 Pin) = B adial Cable 1. m = adial Cable 1. m = K adial Cable 3. m = L adial Cable. m = M adial Cable 1. = N xial Cable 1. m = 3 xial Cable 1. m = xial Cable 3. m = xial Cable. m = T xial Cable 1. m = U esolution ny number of steps from up to 3,768 possible lways characters in clear text. Order example: ingle-turn bsolute Encoder I 1 3 V, I, Gray; quare lange; 3/8 shaft; 1-pin, radial, number of steps: 819 Point Please enter your individual encoder here Point 1 Point 1 Point 1 ICK-TEGMNN

9 Order information Parallel Interface Point 1 Electrical Interface i 1 3 V Par Gray = i 1 3 V Par Gray Capped = G 1 3 V Par Binary = H 1 3 V Par BCD = J, 8 4 V, Open Collector 1, Gray = 8 4 V, Open Collector 1, Gray Capped = V, Open Collector 1, Binary = V, = Open B Collector 1, BCD = V, TTL (747) = B Gray = 6 V, TTL (747) Gray Capped = 7 V, TTL (747) Binary = 8 V, TTL (747) = B BCD = 9 1) Open Collector (747) Mechanical Interface quare lange, 1/4 haft quare lange, 3/8 haft = E = quare lange, 3/8 haft with lat = G quare lange, 1 mm olid haft = C ervo lange/ace Holes, 1/4 shaft = ervo lange/ace Holes, 3/8 shaft = 6 ervo lange/ace Holes, 3/8 shaft w/ flat = 7 ervo lange/ace Holes, 1 mm shaft = 8 Connection adial Cable 1. m = adial Cable 1. m adial Cable 3. m adial Cable. m adial Cable 1. m = K = L = M = N xial Cable 1. m = 3 xial Cable 1. m xial Cable 3. m xial Cable. m xial Cable 1 m = = = T = U adial Connector (M 3 pin) = 4 adial Connector (M 19 pin) = xial Connector (M 3 pin) = 7 xial Connector (M 19 pin) = 8 xial Connector (M 17 pin) = 9 esolution ny number of steps from up to 3,768 possible, with the following electrical interfaces: 1 3 V, parallel, Gray 1 3 V, parallel, Gray Excess 1 3 V, parallel, BIN Number of steps from up to 8 possible, with the electrical interface: 1 3 V, parallel, BCD lways characters in clear text. Order example: ingle-turn bsolute Encoder Parallel 1 3 V, Push-Pull, Gray; quare lange; 3/8 shaft; 3-pin, radial, number of steps: 819 Point Please enter your individual encoder here Point 1 Point 1 Point 1 ICK-TEGMNN

10 bsolute Encoder ingle-turn / I and Parallel PIN and wire allocation llocation for encoder with 1 pin connector; View of the connector M3 fitted to the encoder body I Interface llocation for encoder with 3, 19, or 17 pin connector Parallel Interface ignal Cable 1 Pin GND Blue 1 Data (+) White Clock (+) Yellow 3 N/C 4 cw/ccw Pink N/C 6 N/C 7 +Vs ed 8 et Zero Orange 9 Data () Brown 1 Clock () Violet 11 N/C 1 Case hield P N B M Y Z L X T W K U J V G H 3 Pin KPTE-3P B C M L N V P D U K T E J G H C D E 19 Pin KPTE14-19P unction Cable 17 pin 19 pin 3 pin Bit Lilac Bit 1 white/brown B B B Bit white/green C C C Bit 3 white/yellow D D D Bit 4 white/grey E E E Bit white/pink Bit 6 white/blue G G G Bit 7 white/red H H H Bit 8 white/black J J J Bit 9 brown/green K K K Bit 1 brown/yellow L L L Bit 11 brown/grey M M M Bit 1 brown/pink N N N Bit 13 brown/blue -- P P Bit 14 brown/red cw/ccw brown T GND blue T T tore pink -- U +Vs red V V et Zero grey P U W Enable yellow* X* Parity green Y Case shield Z 1 M L T K J H N G B C P D E 17 Pin M31 ICK-TEGMNN * vailable only with 1 3 V Push-Pull (77) on V s upply voltage to the encoder (before commissioning, note must be taken of the type label of the encoder). GND Zero volt connection to the encoder: electrically isolated from the housing. The voltage referred to GND is U s. CW/CCW_ orward/reverse: this input programs the counting direction of the encoder. If not connected, this input is»high«. If the encoder shaft, as viewed on the drive shaft, rotates in the clockwise direction, it counts in an increasing sequence. If it should count upwards when the shaft rotates in the anti-clockwise direction, this connection must be connected permanently to»low«level (zero volts). Enable_ tore_ Parity ET This input activates the data output driver when a»low«level is applied. If not connected, this input is»low«. In the case of a»high«level, the outputs are in the tristate mode. This input stores the encoder data in Gray code when a»low«level is applied. This avoids a read error if the out- put data ist requested in binary code. If this input is»low«, the data at the encoder output is stable, irrespective of whether the input shaft rotates. If not switched, this input is»high«. This output supplies a»high«level when the binary check sum of the data bits is even. This input serves to set the zero electronically. If the ET line is connected to U s for more than 1 ms, the mechanical position corresponds to the value.

11 / ignal outputs Data format for resolutions 8,19 (1-13 bits) In order to be compatible with the data formats on the market, a distinction is made in the 6 between two data formats. The first data format applies to the encoder designs with resolutions up to 13 bits. This is the standard data format for the single-turn absolute encoder. Data format for resolutions > 8,19 (14 and 1 bits) The data transmitted is leftjustified. The 1 data bits are followed by two error bits. Error 1 (E 1 ) = Position error During the determination of the position, an error has occurred since the last I transmission. This error bit will be deleted during the next I transmission. Error (E ) = light source monitoring ICK-TEGMNN 11

12 ccessories Dimensional drawings and order information crew-in system M3, 1 pin emale connector M3, 1 pin, straight, screened Male connector M3, 1 pin, straight, screened Part no. Contacts Part no. Contacts DO-31-G TE-31-G approx. General tolerances according to DIN IO 768-mk General tolerances according to DIN IO 768-mk emale connector M3, 1 pin, straight, cable 1 pin, 4 x x. + x. + x.14 mm with screening, capable of being dragged, cable diameter 7.8 mm Part no. Contacts Cable length DOL-31-G1MM m DOL-31-G3MM m DOL-31-GMM m DOL-31-G1MM m DOL-31-GMM m DOL-31-G3MM m crew-in system M 3 pin emale connector M3116, 3 pin, straight Part no. Contacts DO-M3-G (3.4) Max..943 (74.7) N B M C T Y Z L D X U K E V W J G H DO-M3-G emale connector M3116, 3 pin, straight, cable core, x x.14 + x. mm with screening, capable of being dragged, cable diameter 7.8 mm DOL-M3-G1MM DOL-M3-G3MM Part no Contacts 3 3 Cable length 1. m 3. m DOL-M3-GMM m DOL-M3-G1MM m DOL-M3-GMM m DOL-M3-G3MM m 1 ICK-TEGMNN

13 / Dimensional drawings and order information crew-in system M 19 pin emale connector M 3116, 19 pin, straight Part no. Contacts DO-M19-G (9.36) Max..99 (66.1) M B N L P C V U K D T J E H G DO-M19-G emale connector M 3116, 19 pin, straight, cable core, x x.14 + x. mm with screening, capable of being dragged, cable diameter 7.8 mm DOL-M19-G1MM DOL-M19-G3MM Part no Contacts Cable length 1. m 3. m DOL-M19-GMM m DOL-M19-G1MM m DOL-M19-GMM m DOL-M19-G3MM m crew-in system M 17 pin emale connector M 316, 17 pin, straight Part no. Contacts DO-M17-G (37.11).64 (67.41) B M C N L P T D K E J H G emale connector M 316, 17 pin, straight, cable core, x x.14 + x. mm with screening, capable of being dragged, cable diameter 7.8 mm DOL-M17-G1MM DOL-M17-G3MM Part no Contacts Cable length 1. m 3. m DOL-M17-GMM m DOL-M17-G1MM m DOL-M17-GMM m DOL-M17-G3MM m ICK-TEGMNN 13

14 ccessories Dimensional drawings and order information Couplings Helvetical curved beam, max. shaft offset radial.1 in., axial.1 in., torsional stiffness. lb-in/min, annodized aluminum Part no. haft diameter KUP-1414-H KUP-3838-H KUP-3814-H /4 in 1/4 in 3/8 in 3/8 in 3/8 in 1/4 in KUP-138-H mm 3/8 in KUP-11-H mm 1 mm B1 B KUP-XXXX-H Cables Cable 11 core, per meter, 4 x x. + x. + 1 x.14 mm with screening, cable diameter 7. mm Part no. Wires LTG-411-MW Cable 1 core, per meter, 4 x x. + x. + x.14 mm with screening, capable of being dragged, cable diameter 7.8 mm Part no. Wires LTG-1-MW Cable core, per meter, x.14 + x. mm with screening, cable diameter 7.8 mm Part no. Wires LTG-6-MW ICK-TEGMNN

15 / Dimensional drawings and order information dapter modules for I Interface erial-parallel dapter modules Part no. D-IG-P D-I-P D-IPG-P D-IP-P D-IP-P Description I-Parallel dapter module in plastic housing I-Parallel dapter module without plastic housing I-Parallel dapter module, programmable, in plastic housing I-Parallel dapter module programmable, without plastic housing, with front plate I-Parallel dapter module programmable, without plastic housing, without front plate crew-in systems ub-d for dapter modules Male connector ub-d, 1 pin, straight, screened Part no. Contacts TE-D1-G emale connector ub-d, 37 pin, straight, screened Part no. Contacts DO-D37-G General tolerances according to DIN IO 768-mk General tolerances according to DIN IO 768-mk ICK-TEGMNN 1

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach

DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing

More information

DKS 40: Incremental Encoder

DKS 40: Incremental Encoder DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. Besides has the DKS 4 a very high protection

More information

DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions

DGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions ,, 1/ and 3/34: Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variations: 1/4 and 3/8 in solid shafts with square flange or servo mount, through

More information

VFS60: Motor Feedback System for installation on asynchronous motors

VFS60: Motor Feedback System for installation on asynchronous motors Data heet : Motor eedback ystem for installation on asynchronous motors elect the motor feedback system to suit your individual requirements. Possible product variations: Photo: Wieland Werke G Through

More information

DGS 35/34: Incremental Encoders for rough environmental conditions

DGS 35/34: Incremental Encoders for rough environmental conditions Possible product variations: 1/4 and /8 in solid shafts with H E E T elect your individual encoder! A T A /4: Incremental Encoders for rough environmental conditions square flange or servo mount, through

More information

The VFS60 is a high-resolution. Excellent concentricity and excep- immunity. tional robustness are achieved

The VFS60 is a high-resolution. Excellent concentricity and excep- immunity. tional robustness are achieved to suit your individual requirements. Possible product variations: Through hollow or blind hollow shaft Cable outlet universal.5 m or 1.5 m oto: Wieland Werke G Number of lines from 1 up to 5.53 Interfaces

More information

DKS 40: Incremental Encoder

DKS 40: Incremental Encoder DKS 4: Incremental Encoder By adopting highly successful Mini- Disc technology, the DKS 4 is extremely robust and can resist high levels of shock and vibration. In addition the DKS 4 has a very high protection

More information

Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads

Product Information. RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads Product Information RIQ 425 Absolute Rotary Encoder with Inductive Scanning Principle for High Bearing Loads May 2014 RIQ 425 Absolute rotary encoders Synchro flange 01C Solid shaft for separate shaft

More information

DFS60 Incremental Encoders. High-resolution, programmable encoder for complex applications and high operational demands

DFS60 Incremental Encoders. High-resolution, programmable encoder for complex applications and high operational demands P r o d u c t i n f o r m at i o n DFS60 Incremental Encoders High-resolution, programmable encoder for complex applications and high operational demands DFS60 Incremental encoders High-resolution, programmable

More information

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Bearing Life: Shaft Speed: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable:

Material: Weight: Shaft Speed: Starting Torque: Storage Temp.: Shock: Vibration: Bump: Humidity: IP Rating: Cable: Connector: Flat Cable: Automation / Mini Type 2RMHF Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 1/4 inch Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution:

More information

Material: Weight: IP Rating: Cable: Connector:

Material: Weight: IP Rating: Cable: Connector: Automation / Mini Hollow Shaft Encoder - Ø 24 mm Hollow Bore: Ø 2 mm to Ø 6 mm Resolution up to 7.500 ppr IP 64 rating (IP 50 for flat cable option) Electrical Specifications Code: Resolution: Supply Voltage:

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P

TECHNICAL DATASHEET Absolute Encoder AC 58 - SSI-P n n n n n Compact design: 59 mm mounting depth for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response Parameterization: Resolution, code type, direction,

More information

Ø50mm Shaft Multi-Turn Absolute Type

Ø50mm Shaft Multi-Turn Absolute Type Ø50mm Shaft Multi-Turn Absolute Type Diameter Ø50mm Shaft Type Multi-Turn Absolute otary Encoder Features Total 23-bit resolution (8388608-division) of 10-bit single-turn (1024-division) and 13-bit multi-turn

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 4 mm and a blind hollow shaft

More information

BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m

BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m BKS/PKS: Compact absolute and incremental wire draw encoders for measuring lengths up to 5 m Precise linear guidance, as required for other length measurement systems, is not necessary. The choice between

More information

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm

E6CP-A. An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. Low-cost Encoder with Diameter of 50 mm Low-cost Encoder with Diameter of 50 mm CSM DS_E An Absolute Encoder at About the Same Price as an Incremental Encoder. Ideal for robot limit signals. High-precision detection of automatic machine timing.

More information

EZ Encoder : Optical Incremental

EZ Encoder : Optical Incremental 1. Introduction The EZ25 Encoder is a 2.5 incremental optical encoder, designed for optical shaft encoder motion control and precision sensor systems. Our ET7272 available models are short circuit proof

More information

Smart-Encoder : Optical Incremental

Smart-Encoder : Optical Incremental 1. Introduction The Smart-Encoder effectively eliminates multiple encoder part numbers by bringing intelligence and security to its design. In seconds, a four-digit LED display with two push-buttons enables

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder RMHF Introduction Mini hollow shaft encoder (blind end) mm diameter - up to 00 pulses/turn Up to 0000 counts Std. IP ( option; Ribbon cable +IDC connector

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment.

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment. Absolute 60-mm-dia. Rotary Encoder A High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

Type SCH94FO. Type SCH94FO. Description

Type SCH94FO. Type SCH94FO. Description Type SCH94FO Hollow Shaft Fiber Optic Encoder - Ø 94 mm Dual Output Option (Digital & Fiber Optic) Fiber Optic Transmission up to 2,000 meters (~ 1.25 miles) No Degradation of Encoder Signal from Electrical

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

EZ Encoder : Optical Incremental (P Series)

EZ Encoder : Optical Incremental (P Series) 1. Introduction Our EZ Encoders effectively eliminate multiple encoder part numbers by bringing intelligence and security to the design. A four-digit LED display with two push-buttons enables the user

More information

ENC-CK58SN-L R-L1

ENC-CK58SN-L R-L1 CK58/ CK59/ CK60 Blind Hollow Shaft Encoder Series FETURES Standard Encoder for Heavy Industrial pplications Blind Hollow Shaft up to ø15mm 2 to 10,000 Cycles Per Revolution 8 to 40,000 Pulses Per Revolution

More information

ENC-MC58SN-L R-L1

ENC-MC58SN-L R-L1 MC58/ MC59/ MC60 Hollow Shaft Magnetic Encoder Series FETURES DESCRIPTION Standard Encoder for Heavy Industrial pplications Hollow Shaft up to ø15mm 20 to 10,000 Cycles Per Revolution 80 to 40,000 Pulses

More information

Incremental Hollow Shaft Encoder

Incremental Hollow Shaft Encoder www.scancon.dk Incremental Hollow Shaft Encoder SCH32B Introduction Mini hollow through shaft encoder Std. IP 65 Thermal shutdown at 155 C Strong compact electronics Based on 2 precision ball bearings,

More information

DFS60 Incremental Encoders. High-resolution, programmable encoder for sophisticated applications

DFS60 Incremental Encoders. High-resolution, programmable encoder for sophisticated applications Product information DFS60 Incremental Encoders High-resolution, programmable encoder for sophisticated applications DFS60 Incremental encoders High-resolution, programmable encoder for sophisticated applications

More information

wheel encoder! The DKV 60 incremental measuring and extremely compact solution for the direct determination of position and speed of a conveyor belt.

wheel encoder! The DKV 60 incremental measuring and extremely compact solution for the direct determination of position and speed of a conveyor belt. DKV 60: Incremental measuring wheel encoder The basis of the product is the DKS 40 incremental encoder. The DKS 40 and therefore the DKV 60 utilise Mini-Disc technology, making the DKV 60, extremely robust

More information

Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Material: Weight: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands: Oil & Gas / Heavy Industry Type 2REX-H EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc

More information

Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:

Material: Weight: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands: Oil & Gas / Heavy Industry Type 2REX-H-SR EN 60079 Electrical Specifications Code: Resolution: Supply Voltage: Voltage: Current: Incremental 1 to 10,000 ppr (pulses per revolution) 4.5 Vdc min. to 30 Vdc

More information

Absolute Rotary Encoder E6CP

Absolute Rotary Encoder E6CP Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the

More information

40 A6B2 INCREMENTAL ROTARY ENCODERS,OUTSIDE DIAM 40 MODEL A6B2 SUBSTITUTE E6B2

40 A6B2 INCREMENTAL ROTARY ENCODERS,OUTSIDE DIAM 40 MODEL A6B2 SUBSTITUTE E6B2 ROTRY ENCODERS 40 6 INCREMENT ROTRY ENCODERS,OUTSIDE DIM 40 MODE 6 SUSTITUTE E6 Sequence Number 40 outsidediam diam 40 : C: PNP open collector Open collector output Push Pull output S: singleness W: 90

More information

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features:

ENCODER. Incremental Angle Transducer. Series A36, A58. Key-Features: ENCODER Incremental Angle Transducer Series A36, A58 Key-Features: Content: Technical Data A36...2 Technical Data A58...4 Elektrical Data...6 Accessories...7 Measuring Wheels...8 Order Code...9 - Incremental

More information

Up to 85% higher Service Life due to efficient sealing method.

Up to 85% higher Service Life due to efficient sealing method. Robot Accessories Feeding through Up to 85% higher Service Life due to efficient sealing method. 346 Robot Accessories Feeding through Feeding through DDF 2 Rotary Feed-through Series Size Page DDF 2 348

More information

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide

Product Information. LS 1679 Incremental Linear Encoder with Integrated Roller Guide Product Information LS 1679 Incremental Linear Encoder with Integrated Roller Guide February 2007 LS 1679 Incremental linear encoder for measuring steps to 5 µm or 1 µm Integrated wear-free roller guide

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module. This module is designed to detect rotary or linear position when used together with a codewheel or linear strip. The EM1 consists

More information

Incremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range

Incremental Encoder DFS60 in a class of its own. The high-resolution incremental encoder range ProduCt information Incremental Encoder DFS60 in a class of its own The high-resolution incremental encoder range PDF processed with CutePDF evaluation edition www.cutepdf.com DFS60 In a class of its own

More information

Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness

Gurley Models LA18, LA20, LA25, High Resolution - Industrial Ruggedness Gurley Models LA18, LA20, LA25, and LA35 Absolute Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: absolute Max Resolution: 0.5 to 8µm High Resolution - Industrial Ruggedness ingenuity@work

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix multiturn encoders 5868 and 5888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a maximum resolution

More information

Linear encoders without bearings incremental System for linear motion feedback

Linear encoders without bearings incremental System for linear motion feedback Features Robust magnetic sensing method Output signals A 90 B with index signal Output circuits: HTL/push-pull and TTL/RS422 Resolution up to 5 µm (4-times evaluation) Non-contact, wear-free sensing system

More information

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 8. Description. Features Description Page 1 of 8 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders

Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Considerations for Specifying, Installing and Interfacing Rotary Incremental Optical Encoders Scott Hewitt, President SICK STEGMANN, INC. Dayton, OH www.stegmann.com sales@stegmann.com 800-811-9110 The

More information

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles PRDS2 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 degrees in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Incremental encoder

More information

Incremental Rotary Encoders

Incremental Rotary Encoders Incremental Rotary Encoders Rotary Magnetic Incremental Encoder Encoders ELTRA are designed in order to control the position and the angular speed of moving mechanical axels. Rotary Incremental Eltra encoder

More information

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR

SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR SE22HR Small Encoder High Resolution 5V optical encoder up to 2048 CPR Description SE22HR is a very high performance hollow shaft encoder; a high resolution is achievable in a small space with a good performance/price

More information

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT)

MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) MK4 S CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER (SYNCHRONOUS SERIAL OUTPUT) TECHNICAL DATA Measurement taken Position read sampling time (typical) Shock test DIN IEC68T2-27 Vibrations DIN

More information

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181

Contactless Encoder Incremental: ppr RI360P0-QR24M0- INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features

EM1. Transmissive Optical Encoder Module Page 1 of 9. Description. Features Description Page 1 of 9 The EM1 is a transmissive optical encoder module designed to be an improved replacement for the HEDS-9000 series encoder module. This module is designed to detect rotary or linear

More information

Accessories. Servo Motors. Servo Motors B-45. Accessories

Accessories. Servo Motors. Servo Motors B-45. Accessories Servo Motors Servo Motors Accessories Accessories Introduction NX Accessories Page Cables B-46 Flexible Couplings B-50 Control Module B-51 Data Setting Software B-51 Accessory Sets B-52 Regeneration Units

More information

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics

RK-2 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD. Main characteristics RK-2 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED HEAD (ANALOG OR START/STOP OUTPUT) Main characteristics Absolute transducer Strokes from 50 to 4000mm (RK-2- -N/E/S) Digital output

More information

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71. Optical SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational

More information

Accessories. Servo Motors. Servo Motors B-47. Accessories

Accessories. Servo Motors. Servo Motors B-47. Accessories Servo Motors Servo Motors Accessories Accessories Page Cables B-48 Flexible Couplings B-52 Control Module B-55 Data Setting Software B-55 Accessory Sets B-56 Battery B-56 Regeneration Units B-57 B-47 Accessories

More information

Contactless Encoder SSI RI360P0-QR24M0-HESG25X3-H1181

Contactless Encoder SSI RI360P0-QR24M0-HESG25X3-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Positioning element and aluminium ring not incl. output 25 bit, Gray-coded clock rate: 62.5 KHz 1 MHz Single or multiturn, length

More information

AC diagonal module Ø 200 mm

AC diagonal module Ø 200 mm max. 850 m /h C diagonal module Ø 00 mm Material: Housing: Plastic P Support bracket: Plastic P Impeller: Plastic P Rotor: Coated in black Number of blades: 7 Direction of air flow: "V" Direction of rotation:

More information

Flat. Compact. Cost-effective. FWS Flat Change System

Flat. Compact. Cost-effective. FWS Flat Change System Flat. Compact. Cost-effective. FWS Flat Change System Manual tool changing system for small manipulators and grippers, with integrated air and electrical feed-through. Field of Application The changer

More information

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions

CSM Color sensors. Color sensors for the detection of a single color in restricted space conditions CSM Color sensors Color sensors for the detection of a single color in restricted space conditions Due to its compact design, the CSM can be used in the most confined of spaces. The choice of color tolerance

More information

Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181

Rotative measurement Incremental rotary encoder Ri-10S10C-2B4096-H1181 Clamping flange, Ø 58 mm Solid shaft, Ø 10mm x 20mm Optical measuring principle Shaft material, stainless steel Protection class IP67 on the shaft side -40 +85 C Max. 6000 rev/min (continuous operation

More information

MAGNETOSTICTIVE TRANSDUCER

MAGNETOSTICTIVE TRANSDUCER MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges 50 to

More information

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment

Ordering Information. Absolute 60-mm-dia. Rotary Encoder E6F-A. High Accuracy and Durability for Automatic Equipment Absolute 60-mm-dia. Rotary Encoder A. High Accuracy and Durability for Automatic Equipment Stronger shaft and greater durability (120 N in the radial direction and 50 N in the thrust direction) than previous

More information

Magnetic Sensor - Incremental EHP

Magnetic Sensor - Incremental EHP small design: 12 x 13 x 35 mm stainless steel case resolution up to 0,5 μm; hysteresis ± 1μm pole pitch:1; 2 mm output signal: Digital (TTL-RS422) or analog (1 Vpp) direct connection to control / display

More information

DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure

DS 210. Electronic Pressure Switch. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure Without Media Isolation accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Contacts, or independent contacts freely configurable Analogue output wire:... 0

More information

Series SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4...

Series SM ø12 mm. Inductive Position Transducer. ranges mm. linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6. out: AC, V, V, 4... LVDT Inductive Position Transducer Series SM ø12 mm ranges 2...200 mm linearity 0,2/0,3% ø12 mm, clamp-ø8 mm h6 out: AC, 0...10 V, 0...5 V, 4...20 ma with external or integrated cable electronics repeatability

More information

MICROMASTER Encoder Module

MICROMASTER Encoder Module MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified

More information

LD OEM/LD PDS/LD PeCo

LD OEM/LD PDS/LD PeCo LD OEM/LD PDS/LD PeCo Features LD OEM/PDS: 360 field of view LD OEM: the basic platform to LD PeCo: 90 field of view provide customized software 14,400 Hz scan rate programs on board and offers the Class

More information

WARNING. The information contained has been scrupulously checked. However AUTINOR declines al1 responsibility for error or omission.

WARNING. The information contained has been scrupulously checked. However AUTINOR declines al1 responsibility for error or omission. AUTINOR Version of 19 December 2000 WARNING This manual is deemed correct on going to press. The information contained has been scrupulously checked. However AUTINOR declines al1 responsibility for error

More information

Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151

Contactless Encoder Analog RI360P0-QR24M0-ELIU5X2-H1151 Compact, rugged housing Many mounting possibilities Status displayed via LED Measuring range indicated via LED Immune to electromagnetic interference Measuring range programmable via Easy Teach Output

More information

Absolute encoder TRT with PROFINET interface

Absolute encoder TRT with PROFINET interface Absolute encoder TRT with PROFINET interface Document no.: TRT 12886 KE Date: 07.02.2017 ingleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration

More information

GENERAL INFORMATION. B-nB, D-nD. Amplitude Vpp Offset / Asymmetry Amplitude ratio A/B Phase A to B 0,5±20% 2,5±10% - -

GENERAL INFORMATION. B-nB, D-nD. Amplitude Vpp Offset / Asymmetry Amplitude ratio A/B Phase A to B 0,5±20% 2,5±10% - - GENERAL INFORMATION SmarSens INTRODUCTION SmarSens is a range of Hohner encoders that give a single encoder the possibility of absolute and incremental signals. Its compact and robust design with numerous

More information

DIRECT DRIVE ROTARY TABLES SRT SERIES

DIRECT DRIVE ROTARY TABLES SRT SERIES DIRECT DRIVE ROTARY TABLES SRT SERIES Key features: Direct drive Large center aperture Brushless motor design Precision bearing system Integrated position feedback Built-in thermal sensors ServoRing rotary

More information

Incremental angle encoders based on the inductive AMOSIN Measuring Principle

Incremental angle encoders based on the inductive AMOSIN Measuring Principle Incremental angle encoders based on the inductive MOSIN Measuring Principle Product information ugust 2016 WMK2010 series Composed of K WMK2010 and measuring flange or measuring ring Grating period 1000µm

More information

RLS Series RLS-GD-20/20 -UV. Design. RLS-GD Series Gloss Detection Sensors. Accessories: (cf. page 9) Product name:

RLS Series RLS-GD-20/20 -UV. Design. RLS-GD Series Gloss Detection Sensors. Accessories: (cf. page 9) Product name: RLS Series RLS-GD-20/20 -UV Detection of Glass Coating - Insensitive to outside light due to clocked UV illumination - Receiver (20 ) and reference - Storing of up to 31 gloss degrees (gloss values) -

More information

Technical data. General specifications. Indicators/operating means

Technical data. General specifications. Indicators/operating means Model Number Single head system Features Sensor head bidirectional and rotatable Function indicators visible from all directions Quick mounting bracket Selectable sound lobe width Programmable Diagrams

More information

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features:

LVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD Hydraulic Series. Key-Features: HM 1808 LVDT Inductive Position Transducer - Hydraulic Series SM-HYD Hydraulic Series Key-Features: Content: - Screw flange M18x1,5 / M30x1,5 or plug-in flange Ø18 - Pressure up to 400 bar - Measurement

More information

Photoelectrics Through-beam Type PA18C.T..., DC

Photoelectrics Through-beam Type PA18C.T..., DC Photoelectrics Through-beam Type, DC Miniature sensor range Range: 20 m (Axial), 16 m (Radial) Sensitivity adjustment by potentiometer Modulated, infrared light 850 nm Supply voltage: to 30 VDC Output:

More information

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through

03-Durchfuehren_RZ_0708_EN.qxd:03-Durchfuehren GB.qxd :06 Uhr Seite 200 Feed-through Feed-through Feed-through FEED-THROUGH Series Size Page Rotary Feed-through for Robots DDF 202 DDF 031 206 DDF 040 208 DDF 040-1 210 DDF 050 212 DDF 050-1 214 DDF 063 216 DDF 080 218 DDF 080-1 220 DDF

More information

Speed sensor MiniCoder GEL 2471

Speed sensor MiniCoder GEL 2471 Speed sensor MiniCoder GEL 2471 for electrically conducting toothed-wheels Technical information version 10.02 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless

More information

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet

POSIWIRE. WS61 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet Cable Extension Position Sensors with internal magnetic encoder Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does

More information

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment)

20 mm Beam Pitch General Purpose Area Sensor. Distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment) OTHER SUNX PRODUCTS SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Test input Interference prevention Wide sensing area of 7 m,60 mm with 0 mm beam pitch Refer to p.9l for

More information

Linear measuring technology

Linear measuring technology raw wire encoder 80 The draw wire mechanics 80 can be used up to a measuring length of 3 meters These draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute

More information

HygroClip Introduction

HygroClip Introduction What is the HygroClip? HygroClip ntroduction he HygroClip is a high quality probe for the measurement of humidity and temperature. t is used in a wide range of applications including handheld instruments,

More information

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor

DCT 532. Industrial Pressure Transmitter with i²c interface. Stainless Steel Sensor Industrial Pressure Transmitter with i²c interface Stainless Steel Sensor Accuracy according to IEC 60770: standard: ± 0. % FSO option: ± 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Digital

More information

MVSI-TS. Technical features

MVSI-TS. Technical features Technical features Power supply Three-phase voltage from 48V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency, with constant torque load profile. Polarity 4, 6 and

More information

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650

Electronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650 M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de

More information

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE

ELECTRICAL. DATA AND INDEX Not all complements shown A shown for reference. Index A leads B, CW (from shaft end) TERMINAL CONNECTIONS COM VCC CASE NorthStar brand SERIES HD35R Heavy Duty Encoder Key Features Phased Array Sensor for Reliable Signal Output Rugged Design with Wide-Spaced Oversized Bearings Unbreakable Code Disc up to 5000PPR Improved

More information

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection

DS 200 P DS 200 P. Electronic Pressure Switch with Flush Process Connection with Flush Process Connection piezoresistive pressure sensor up to independent contacts, configurable optional: analogue output Exprotection (for wire) cooling element up to 00 C nominal pressure ranges

More information

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP 335 DMP 335. Industrial Pressure Transmitter. Welded, Dry Stainless Steel Sensor. Pressure Transmitter. Industrial DMP 5 Industrial Pressure Transmitter Welded, Dry Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Industrial Pressure Transmitter Nominal pressure from 0... 6 bar up to 0... 600 bar Output

More information

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections

DS 400 P. Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing. on hygienic process connections Intelligent Electronic Pressure Switch in Hygienic Stainless Steel Ball Housing Description The electronic pressure switch is the successful combination of hygienic process connections with flush welded

More information

SERIES BNC 50, COAXIAL MINIATURE CONNECTORS

SERIES BNC 50, COAXIAL MINIATURE CONNECTORS SERIES BNC 50, COAXIAL MINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER BNC is still one of the most popular connector series, featuring a two stud bayonet coupling mechanism, which is particularly

More information

Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn Encoder

Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn Encoder Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Rexroth IndraControl VCP 20 Rexroth GDS/GDM1.1 Digital Singleturn/Multiturn

More information

Dimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie.

Dimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie. Q Dimensions Transmitter Detection field + 9. Detection field 7.8 n Beam. Beam Receiver III 0. 0 Fix H H H Fn Model Number Light grid with fixed cable with -pin, M x connector, and fixed cable with 8-pin,

More information

Scanning System S-2100

Scanning System S-2100 2D laser measurement system The fastest 2D laser measurement system in the world 119 m range Scan rate >1 million points/sec 360 vertical field of view System description The PENTAX Scanning System S-2100

More information

HOG 86. The incremental HeavyDuty encoder for highest demands

HOG 86. The incremental HeavyDuty encoder for highest demands HOG 86 The incremental HeavyDuty encoder for highest demands Extremely robust. Failsafe in any environment The solid, extremely sturdy housing with minimum 10 mm wall thickness is a prerequisite design

More information

Manual. Analog (U/I) Sendix M3661 / M3681. Sendix M3661R. Sendix M5861. Absolute multiturn encoder. Order code: 8.M36X1.XXXX.XX12

Manual. Analog (U/I) Sendix M3661 / M3681. Sendix M3661R. Sendix M5861. Absolute multiturn encoder. Order code: 8.M36X1.XXXX.XX12 R60722.0002 - Index 3 Analog (U/I) Manual Absolute multiturn encoder Order code: 8.M36X1.XXXX.XX12 Order code: 8.M3661R.XXXX.XX12 Order code: 8.M5861.XXXX.XX12 Publisher Kübler Group, Fritz Kübler GmbH

More information

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) *1. configuration. Dark-ON/Light-ON Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated) * EE-SX/6 Photomicrosensor with 0- to 00-mA direct switching capacity for built-in application. Series includes models that

More information

PT9150. Heavy Industrial Incremental Encoder

PT9150. Heavy Industrial Incremental Encoder PT950 Heavy Industrial Incremental Encoder Linear Position to 550 inches (00 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent Free-Release Damage IP67 NEM 6 Protection GENERL Full

More information

SPACESCAN SERIES SS 02

SPACESCAN SERIES SS 02 Description 0-10 metre sensing range 12 to 384 channels Available with channel spacing of 5, 10 or 20 mm Active length of 225 mm to 1920 mm Housing length of 300 mm to 1980 mm Plug connection 18-30 V dc

More information

FOM-9010, FOM-9011 and FOM-9012

FOM-9010, FOM-9011 and FOM-9012 Control and Alarm Voltage sense, open collector, or contact inputs Features: FOM-00: Voltage Sense, Open Collector, or Dry Contact Inputs. State Detection for TIA-, TIA-, and TTL Signals. FOM-0: SPDT Form

More information

DF Series Manual Version

DF Series Manual Version DF Series Manual DF Series Manual Version 1.4 27.09.2016 DF Series Manual Version 1.4 27.09.2016 2/60 Inhalt 1 Introduction... 5 1.1 Manufacture... 5 2 Safety instruction... 6 3 Quickstart guide... 7 3.1

More information