TECH SUPPORT NOTES. Help Desk: x4357 For priority support, please use the classroom phone. At the end of class:

Transcription

1 TRAINER NATURAL RESOURCES BUILDING TECH SUPPORT Help Desk: x4357 For priority support, please use the classroom phone. NOTES At the end of class: Turn off the projector. Log off the teaching station. Turn off the room lights. PLEASE LEAVE THIS MANUAL ON THE COUNTERTOP OF THE INSTRUCTOR S STATION

2 Trainer Natural Resources Building THIS ROOM IS EQUIPPED WITH: COMPUTER PC Wireless Presenter EQUIPMENT OVERVIEW VIDEO Video Projector Document Camera AUDIO Wall Speakers Stereo Receiver VCR 1

3 PROJECTOR Panasonic PT-F300 Projector To use the projector: 1. Make sure both the projector and the needed video device (Computer, VCR, DVD, etc.) are turned ON. 2. Use the corresponding INPUT button on the projector s remote to activate the video input line for the video device. Classroom computers, laptops, and document cameras are generally activated by pressing the COMPUTER button until the correct input line is selected; whereas, DVD and VCR players are generally activated by pressing the VIDEO button in the same fashion. Below is the input configuration for this room. In a few classrooms, additional steps are needed to get some of the video devices to display on the projector. A detailed explanation of how to operate each device is given in the following sections of this manual. Input Buttons INPUT CONFIGURATION: Computer 1 - Extron Switcher S-Video - Video Switcher SWITCHER CONFIGURATION: Please see the full switcher configuration chart on page 7 of this manual. Projector Remote 2

4 AUDIO SYSTEM JVC RX-6010V Stereo Receiver To adjust audio settings: 1.) Make sure the receiver and the corresponding video device are turned ON. 2.) Select the appropriate video device using input configuration chart on page 7. 3.) Adjust the VOLUME knob on the receiver to reach the desired level. 3

5 DOCUMENT CAMERA Samsung SDP-860 Document Camera To use the document camera: 1.) Make sure the document camera and the projector are turned ON. 2.) Select the appropriate video configuration using input configuration chart on page 7. 4

6 DVD/VCR JVC HR-57300U VCR To use the VCR: 1.) Make sure the VCR, projector, and receiver are turned ON. 2.) Select the appropriate video and audio configuration using input configuration chart on page 7. Windows Media DVD Player While this room is not equipped with a dedicated DVD player, DVDs can be played through the PC s DVD drive. To play a DVD: 1.) Make sure the PC, projector, and receiver are turned ON. 2.) Insert your DVD into the PC s DVD drive. 3.) If video playback software does not automatically open, launch Windows Media Player from the application menu. 5

7 COMPUTER HP Computer To use the computer: 1.) LOGON to the computer using your UWSP username and password. 2.) To display the computer s screen on the projector, turn the projector on using the POWER button on the remote. Then press the corresponding input button on the projector remote to choose the PC as the video source (see the PROJECTOR page). Unlocking a computer: If the PC s screen indicates that it has been locked by another user, you can unlock the system by restarting it. To restart a locked computer: 1.) Press and hold the POWER button on the computer until it shuts down (typically, you will need to hold the button for 5 to 10 seconds before the sequence will begin). 2.) Press the power button again to restart the PC. When the login screen appears, enter your UWSP username and password. NOTE TO USERS: Please remember to logoff the computer when finished. After 60 minutes of inactivity, classroom computers will automatically lock, preventing subsequent users from logging on. If a computer has accidentally been left locked by another user, please see the section on Unlocking a Computer above. 6

8 INPUT CONFIGURATION Input Configuration INPUT CONFIGURATION INPUT EQUIPMENT > Projector VIDEO SWTICH EXTRON SWITCH RECEIVER INPUT PROJECTOR INPUT VCR VCR TV Sound S-Video Computer PC 1 TV Sound Computer 1 Document Camera 2 Computer 1 7

9 At the end of class: At the end of class: Trainer Natural Resources Building TECHNOLOGY PROBLEMS For issues related to technical services, please consult the technical support information found on the front cover. MAINTENANCE EMERGENCIES During the hours of 7 AM - 3:30 PM, issues related to building maintenance may be directed to Facility Services. During off-hours, maintenance emergencies may be reported to Protective Services. SEE FRONT x4219 FACILITY SERVICES SECURITY CONCERNS For issues related to building or campus security, please contact Campus Protective Services. POLICE/FIRE EMERGENCIES NOTE: There will be 7-12 seconds of silence before the phone rings. Please do not hang up. x3456 CAMPUS PROTECTIVE SERVICES SPPD/SPFD EXIT EXIT EXIT EXIT FOURTH FLOOR