HIGH QUALITY RG-11 CCS SERIES CABLES FOR SATELLITE, CABLE TV ANTENNA RECEPTION AND DISTRIBUTION. Main Features

Transcription

1 HIGH QUALITY CABLES FOR SATELLITE, CABLE TV ANTEN RECEPTION AND DISTRIBUTION RG-11 CCS SERIES Main Features RG-11 cables are designed and manufactured to meet the increasing demands of Cable TV, MATV & SMATV reception and distribution. Cables are manufactured in ISO 9002 approved plant. Manufactured with high quality raw materials and Nitrogen Gas Injection Foaming plant, cables feature Low structural and intrinsic noise, high shielding effectiveness and are made to withstand harsh outdoor hot and humid environments. Newer models with Trishield have been added to comply with Class A+ shielding requirements. RG-11 range also features Low smoke Zero Halogen model to comply with IEC standards.

2 Technical Specifications: Model Product Inner Conductor Braid Material Braid Coverage Construction Centre Conductor Diameter Foam PE Sealed AP Tape Aluminum Braiding Aluminum Foil Jacket Jacket Material Jelly (For Corrosion Protection Jacket Jelly (For Corrosion Protection) Messenger (for BVM) Messenger Diameter Electric Specifications Nominal 20 deg C Inner conductor Outer Conductor Nominal Capacitance Propagation Velocity Ratio Packing 100Y Reel-Size 100Y Reel-Weight 305M Reel-Size 305M Reel-Weight 305M Reel-Weight CS1190BV CS1190BEF CS1190BVF CS1190BVM 90% Coverage 7.80 mm PVC (CS1190BVF) PE CS1190BVF-YES (CS1190BEF) CS1190BEF-YES CS1190BVF-YES CS1190BEF-YES Solid Gl Steel 1.82mm/ ohms/km 35 kgs (For BVM) CS1195BV 95% Coverage 7.80 mm PVC ohms/km CS1197BV CS1197BVF CS1197BVM 97% Coverage CS1197BZT 7.90 mm 7.90 mm 8.03 mm PVC Solid GI Steel 1.82mm/ ohms/km 30x30x30 cm 12 kgs 97% Coverage LSZH mm ohms/km

3 20 deg. C Frequency (MHz) CS1190BV CS1190BEF CS1190BVF CS1190BVM CS1195BV CS1197BV CS1197BVF CS1197BVM CS1197BZT Technical Notes All Models Attenuation increases with increasing temperature and decreasing temperature at the rate of 0.18% / Deg C. DC resistance changes at the rate of 0.393% / Deg C. All Braiding in % are approximate values. Sequential meter marking on all cables.

4 Packaging Information All Models REEL-305MR COIL-100YARD General Notes RG-11 Feedthru type Model RG-11-FT RG-11 Feedthru with F Male adapter Model RG-11-FT+F RG-11 Screw type small Model RG-11-SRW RG-11 Screw type with Pin and Bush Model RG-11-SRW-PIN RG-11 Crimp type Model F-11-ALM RG-11 Compression type Model RG-11-CMP RG-11 BNC Male Crimp type Model BNC-MAL-CRM-RG11 RG-11 BNC Male Compression type Gold Model BNC-MAL-CMP-RG11-GGT RG-11 BNC Male Compression Right Angle Gold Model BNC-MAL-CMP-RG11-RA-GGT RG-11 Compression type PPC Model EX11N716 Stripping Tool Crimp tool Crimp tool Compression tool Compression tool Cable Prep Model CPT-1100 Model DL-806F (RG-6 and RG-11) Model DL-801K Model DL-8081R or DL-8083R Model DL-8071R

5 Cable Construction Part Numbers T-Tinsel Z LSZH Jacket A CCA-Bonded A - CCA Braiding 500-Flexible 500 Series Disclaimer 1. Astel Digicom Electronics reserves the right to change, modify specifications without prior notice. 2. All pictures are for illustrative purposes only. Actual product may be different in color and size, which may appear in product specifications. 3. Every effort is made to provide accurate information at the time of publishing, however Astel Digicom Electronics LLC is not responsible for any loss, directly or indirectly caused by any error in publishing. 4. E&OE (Errors and Omissions are excepted)