DATA SHEET. MODEL : HERMES Part Nr. : LDB-XXXXHE Data Sheet (Ver 2.0) January Data Sheet : LDB-XXXXXHM. 806,Anyang Trade Center Dongan-Gu

Transcription

1 DATA SHEET MODEL : HERMES Part Nr. : LDB-XXXXHE Data Sheet (Ver 2.0) January ,Anyang Trade Center 1107 Bisan-Dong, Dongan-Gu Gu, Anyang-Si Kyunggi-Do, , KOREA Tel : Fax : rjm319@reap.co.kr 1

2 CONTENTS 1. Features General descriptions Block diagram Outline Dimensions Reference data Supported Input Formats OSD & Optional TV tuner Basic operations Customization Contacts Numbering system Panels Support Ordering information The information presented in this document may form a part of quotation or contract under the agreement of both parties. Otherwise, this datasheet is subjected to be changed without notice. 2

3 RECORD OF REVISIONS Revision No. Date Page Description Ver 1.0 Aug,2003 All First Draft, Preliminary Specification Ver2.0 Jan, 2006 IC changed, pw130--> pw131 3

4 1. FEATURES State of the art high performance picture quality design Analog RGB / CVBS (x1) & SVHS (x1) with NTSC, PAL, SECAM / Audio input (x3) / TV / Remote control / Speaker out (x1) Optional input combination, e.g., PC Monitor only, PC Monitor with TV Full CRT multi-sync monitor compatibility Multi-sync capability up to SXGA 75Hz, compatible standard DOS, VGA, SVGA, XGA and SXGA VESA timing Expand DOS, VGA, SVGA and XGA to full screen display True color (16.7M) data processing and display driving Single control operated & transparent On-Screen-Display (hereafter OSD ) user interface Full control of all relevant display and interface parameters via OSD Multi language support VESA DDC1/2B compliant Compatible with VESA DPMS power saving modes Form factor: 120mm (L) x 150mm (W) x 17mm(H) +12VDC single power: 48watts AC/DC power adapter recommended. Operating temperature: 0 to 50 C The 3watt x 2 7 ohms audio capability with treble, bass, volume and mute control through either OSD or remote controller. OSD & Power switch board: ROSD-xxx TV tuner : NTSC, PAL and SECAM LCD Voltage select on Board : 3.3V, 5.0V, 12V 2. GENERAL DESCRIPTIONS LDB-XXXXXHM is an advanced TFT LCD Monitor Control Board. This design enables a full conventional CRT monitor and/or video & audio replacement with a large size Active Matrix LCD module. It is suitable for video resolution up to 75Hz in all video modes, the full display area of the module is used. The design is implemented as a single printed circuit board. The LDB-XXXXXHM is designed to act as a full monitor and/or video & audio interface. Besides the main functionality of an analog and digital video interface, also CVBS (x1), SVHS (x1) and stereo audio amplifier with 3 inputs. The LDB-XXXXXHM is designed to support various TFT LCDs under SXGA resolution by BIOS option, customers line-up their monitors with their own identity with following options. 4

5 3. BLOCK DIAGRAM 12V DC Regulator 3.3V DC 5.0V DC Inverter Control Inverter I/F Red Green Blue Sync 8bitx3 ADC LCD I/F TTL (even) CVBS SVHS Video decoder Scaler Analog DVI LCD I/F TTL (odd) Audio in Audio out Audio Amplifier LCD I/F LVDS Remote controller IR receiver Flash Memory Debug I/F (RS-232) REAP internal usage DDC DDC ROM NVM OSD I/F 5

6 Data Sheet : LDB-XXXXXHM 4. OUTLINES DIMENSIONS STANDARD CONNECTORS FOR POWER, VIDEO, AUDIO, OSD, INVERTER Dimension : 120mm (L) x 150mm (W) x 17mm(H) 6

7 BOARD WITH THE STANDARD CONNECTORS CONFIGURATION (Part# : LDB-AV-XXXXXHM) Panel I/F LVDS INVERTER Panel I/F (TTL) OSD RS232C TUNER DC Input VGA S_Video Comp. Video Audio in left From Video Audio in right From Video Audio in from PC Audio out From PC or Video 7

8 4.2.1 LOW PROFILE CONNECTORS FOR POWER, VIDEO, AUDIO, OSD, INVERTER (ALTERNATIVE) Dimension : 120mm (L) x 150mm (W) x 17mm(H) 8

9 4.3. CONNECTORS INFORMATION INPUT CONNECTORS Power Input connector Connector : DC12 Jack (J602) Pin No. Symbol Description Pin No. Symbol Description 2, 1 GND GND 3 Vin +12Vdc Power Input connector (Alternative) Connector : Molex (J601) Pin No. Symbol Description Pin No. Symbol Description 1 Vin 12V 2 GND GND Analog RGB Input connector Connector : Mini D_Sub 15pin(J101) pin no Symbol Description pin no Symbol Description 1 RED Analog Red 9 NC +5Vdc 2 GREEN Analog Green 10 SGND Sync GND 3 BLUE Analog Blue 11 NC NO CONNECTION 4 GND GND 12 SDA DDC Serial Data 5 GND Digital GND 13 HSYNC Horizontal Sync 6 RGND Red Return 14 VSYNC Vertical Sync. 7 GGND Green Return 15 SCL DDC Data Clock 8 BGND Blue Return Analog RGB Input connector (Alternative) Connector : Molex (J102) pin no Symbol Description pin no Symbol Description 1 NC NO CONNECTION 8 GND GND 2 GND GND 9 GND GND 3 DSCL DDC data clock 10 BLUE BLUE 4 DSDA DDC serial data 11 GND GND 5 GND GND 12 GREEN GREEN 9

10 6 VSYNC Vertical sync 13 GND GND 7 HSYNC Horizontal sync 14 RED RED S-VIDEO input Connector Connector : Mini Din 4 (J304) Pin No. Symbol Description Pin No. Symbol Description 1 GND1 GND1 4 S-VIDEO COLOR 2 GND2 GND2 5 GND3 GND3 3 S-VIDEO LUMINANCE Composite-VIDEO Connector Video input Connector : RCA 1B-Yellow (J303) Pin No. Symbol Description Pin No. Symbol Description 1,3 CVBS Video Signal 2 GND GND EXTERNAL AUDIO & VIDEO Connector (Alternative) Connector : Molex (J302) Pin No. Symbol Description Pin No. Symbol Description 1 AUDEX2R AUDEX2R(PC) 6 CVBS CVBS 2 AUDEX2L AUDEX2L(PC) 7 GND GND 3 AUDEX1R AUDEX1R(VIDEO) 8 SCHROMA COLOR 4 AUDEX1L AUDEX1L(VIDEO) 9 GND GND 5 GND GND 10 SLUMA LUMINANCE TUNER Connector Connector : Molex (J301) Pin No. Symbol Description Pin No. Symbol Description 1 VIDTU VIDTU 5 SCL SCL 2 GND GND 6 SDA SDA 3 AUDTU AUDTU 7 GND GND 4 GND GND 8 12V 12V 10

11 Sound input from Video Connector Input Connector : RCA Red(J803) Pin No. Symbol Description Pin No. Symbol Description 1, 3 AUDIO AUDIO-L 2 GND GND Input Connector : RCA White (J802) Pin No. Symbol Description Pin No. Symbol Description 1, 3 AUDIO AUDIO-R 2 GND GND Sound input from PC Connector Input Connector : ST3505 [STERO Jack] (J801) Pin No. Symbol Description Pin No. Symbol Description 1 GND GND 4 NC NO CONNECTION 2 NC NO CONNECTION 5 AUDIO External Audio-R 3 AUDIO External Audio-L Sound Output Connector : ST3505 [STERO Jack (J804) Pin No. Symbol Description Pin No. Symbol Description 1 GND GND 4 NC NO CONNECTION 2 NC NO CONNECTION 5 AUDIO Audio out_r 3 AUDIO Audio out_l Speaker Connector (Alternative) : 4pin Connecter : Yeonho SMW (J805) Pin No. Symbol Description Pin No. Symbol Description 1 AUDIO Sound out_right+ 3 GND GND 2 GND GND 4 AUDIO Sound out_left+ 11

12 OSD, LED Interface Connector : Molex (J11) Pin No. Symbol Description Pin No. Symbol Description 1 LED 1 LED 1 7 KEY2 INCREASE 2 LED 0 LED 0 8 KEY3 DECREASE 3 Vcc Vcc 5V 9 KEY4 DOWN 4 RCVR remote control 10 KEY5 MENU 5 GND GND 11 KEY6 SOURCE SELECT 6 KEY1 POWER 12 KEY7 UP RS-232C Connector : Molex (J4) Pin No. Symbol Description Pin No. Symbol Description 1 GND GND 3 TX RXD 2 RX TXD 4 VCC 5V OUTPUT CONNECTORS TTL Output (ODD) : HIROSE 40 PIN Header (J2) Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. Symbol 1 3.3V1 11 ODD RED DATA1 21 ODD GREEN DATA1 31 ODD BLUE DATA V2 12 GND4 22 GND6 32 GND8 3 GND1 13 ODD RED DATA2 23 ODD GREEN DATA2 33 ODD BLUE DATA2 4 MCLK 14 ODD RED DATA3 24 ODD GREEN DATA3 34 ODD BLUE DATA3 5 GND2 15 ODD RED DATA4 25 ODD GREEN DATA4 35 ODD BLUE DATA4 6 VSYNC 16 ODD RED DATA5 26 ODD GREEN DATA5 36 ODD BLUE DATA5 7 HSYNC 17 ODD RED DATA6 27 ODD GREEN DATA6 37 ODD BLUE DATA6 8 DE 18 ODD RED DATA7 28 ODD GREEN DATA7 38 ODD BLUE DATA7 9 GND3 19 GND5 29 GND V1 10 ODD RED DATA0 20 ODD GREEN DATA0 30 ODD BLUE DATA V2 12

13 TTL Output (EVEN) : HIROSE 34 PIN Header (J7) Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. Symbol 1 GND1 9 EVEN RED DATA6 17 GND4 25 EVEN BLUE DATA3 2 EVEN RED DATA0 10 EVEN RED DATA7 18 EVEN GREEN DATA5 26 EVEN BLUE DATA4 3 EVEN RED DATA1 11 GND3 19 EVEN GREEN DATA6 27 GND6 4 EVEN RED DATA2 12 EVEN GREEN DATA0 20 EVEN GREEN DATA7 28 EVEN BLUE DATA5 5 EVEN RED DATA3 13 EVEN GREEN DATA1 21 GND5 29 EVEN BLUE DATA6 6 EVEN RED DATA4 14 EVEN GREEN DATA2 22 EVEN BLUE DATA0 30 EVEN BLUE DATA7 7 GND2 15 EVEN GREEN DATA3 23 EVEN BLUE DATA1 31 GND7 8 EVEN RED DATA5 16 EVEN GREEN DATA4 24 EVEN BLUE DATA2 32~34 NC LVDS Output : HIROSE DF14-30S (J402) Pin No. Function Pin No. Function Pin No. Function Pin No. Function 1 Tx0- E 9 TxCLK+ E 17 GND 25 ODE 2 Tx0+ E 10 Tx3- E 18 Tx2- O 26 GND 3 Tx1- E 11 Tx3+ E 19 Tx2+ O 27 VCC 4 Tx1+ E 12 GND 20 TxCLK- O 28 VCC 5 GND 13 Tx0- O 21 TxCLK+ O 29 VCC 6 Tx2- E 14 Tx0+ O 22 Tx3- O 30 VCC 7 Tx2+ E 15 Tx1-O 23 Tx3+ O 8 TxCLK- E 16 Tx1+O 24 GND Backlight Power Connector : MOLEX (J604) Pin No. Symbol Description Pin No. Symbol Description 1 BRIGHT Brightness adjustment 5 GND GND 2 ON/OFF Backlight on/off 6 GND GND 3 GND3 GND3 7 12V 12V 4 5V 5v 8 12V 12V 13

14 5. REFERENCE DATA 5.1. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134) Symbol Description Min Max Unit V DD +12V DC power supply 10.8 V i(rgb) Video input signal (w.r.t. GND) VDC VDC 5.2. FEATURES Parameter Overall dimensions Value Unit width 150 mm height length (from PCB bottom) mm mm Max. output resolution Data processing 1280 x 1024 pixel 24 bits Input impedance video 75 ohm sync 470 ohm Sync polarities Sync levels Supply voltage Max. number of colors Operating temperature Storage temperature Max. weight + / - TTL compatible M 0 ~ ~ V DC colors C C g 14

15 5.3. ELECTRICAL PARAMETERS reference LDB-XXXXXHM, t A 25 C Symbol Description Min Typ Max Unit V DD +12V DC power supply 10.8 V i(rgb) Video input signal (w.r.t. GND) V V PP f S Video sample rate 80 MHz f HS Horizontal sync frequency 30 f vs Vertical sync frequency KHz Hz F SIH Sync input high level 2.5 V V SIL Sync input low level 0.8 VDC I DD2 Supply current +12V (with LCD & inverter) A Note 1. Power consumption measuring condition is 2pixel checkerboard XGA 75Hz and maximum brightness with Samsung LTM170E4 & inverter at t A 25 C. 15

16 6. SUPPORTED INPUT FORMATS 6.1. VIDEO MODE SUPPORT The LDB-XXXXXHM series can support any video mode at the input within the following constraints: The signal sample frequency on the input 80MHz The horizontal sync frequency between 30KHz and 60KHz The modes are detected when presented to the input and previous alignments for setup are automatically recalled. A true multi-sync monitor emulation is implemented. The factory preset supported modes include: Mode *1 Resolution Refresh rate H-freq. Pixel freq. Remarks *1 VGA 640 x Hz 31.47KHz MHz VESA Standard VGA 720 x HZ KHZ MHZ IBM VGA 3H VGA 640 x Hz 31.5KHz MHz Industry Standard VGA 640 x Hz 37.9KHz MHz VESA Standard VGA 640 x HZ 37.5KHZ MHZ VESA Standard SVGA 800 x Hz 37.9KHz MHz VESA Guidelines SVGA 800 x Hz 48.1KHz MHz VESA Standard SVGA 800 x HZ 46.9KHZ MHZ VESA Standard XGA 1024 x Hz 48.4KHz MHz VESA Guidelines XGA 1024 x Hz 56.5KHz MHz VESA Standard XGA 1024 x HZ 60KHZ MHZ VESA Standard SXGA 1280 x Hz 64KHZ MHZ VESA Standard SXGA 1280 x HZ 80KHZ MHZ VESA Standard Notes: 1. All mentioned modes are non-interlaced. The maximum and minimum frame rates are determined by the TFTLCD. 2. Factory preset modes are overwritten by additional user alignments for automatic recall. At all times it remains possible to recall the initial factory presets LCD PANEL & I/O SUPPORT 16 The LDB-XXXXXHM is an advanced and general application TFT LCD Monitor Control board. Therefore execution of this board is not limited to panel manufacturer as well as model. Furthermore, this board operates with any TTL and LVDS interface panel ranging from VGA to SXGA that can be driven with three or less timing signals. The usual timing signals to the panel are H-sync, V-sync and Data Enable. For backlight intensity control mechanism, the built in DC dimming drive signal is prepared to the CCFL inverter control port. The CCFL inverter DC power, generally 12V DC, is prepared to the same port. The users can design own key pad board using OSD & power tact switch and two color LED. Power on/off and OSD input signal is detected and executed by the micro controller.

17 6.3. AUDIO SUPPORT The LDB-XXXXXHM has Hi-Fi Stereo Audio amplifier that users control using OSD interface. There are 4 input channels to the audio input port, and is automatically switched when users select the signal source. The audio output is 2 x 3 watt, and users easily configure the audio interface features using earphone output, speaker output ports. Output max.: 2 x 3 7ohm Current: 450mA max. Input voltage: 12VDC THD (Total Harmonic Distortion): 0.15% S/N: 105dB 6.4. TV TUNER AND VIDEO INTERFACE The LDB-XXXXXHM can be used as PC monitor with TV and/or video board. REAP has developed TV tuner board which operates NTSC, PAL, and SECAM broadcasting system. There are three CVBS input ports and one SVHS input port for standard video interface. High-end Multi-media Display System TFTLCD (Cable) TV LDB-xxxx2 TUN-XX series Speaker DVD VCR Camcorder Etc. PC DVI/VGA/Audio 17

18 7. OSD (On Screen Display) & Optional Tuner board 7.1. OSD Board Dimension OSD Board with 6 Buttons (Part# : ROSD-T7) MENU / SOURCE / DOWN / UP / LEFT / RIGHT / REMOCON / LED / POWER 18

19 7.2. SUMMARY OF OSD MENU Analog RGB brightness contrast H position V position phase Frequency Volume Treble Bass Balance Audio preset Mute Osd preset Osd h pos Osd v pos Osd timeout Osd background language Room lighting Sleep time Factory reset More option Color temp Red temp Green temp Blue temp Sharpness filter VIDEO TV brightness contrast sharpness color tint volume treble bass balance Audio preset mute osd Osd h pos Osd v pos Osd timeout Osd background language Room lighting Sleep time Factory reset More option channel Tune type Fine tune Channel edit Channel search source region 19

20 7.3. OSD Menu enables user to manipulate the image and settings. Brightness : It is used to adjust brightness of the screen. (used to pwm control) Contrast : It is used to adjust distinction. H position : It is used to move screen right-wards or left-wards. V position : It is used to move screen upwards or downwards. Phase : It is used to adjust the phase of the screen. Please use it in case there is noises or lines are overlapped. Frequency : It is used to adjust horizontal size of the screen by increasing or decreasing number of picture elements. 20

21 7.3. OSD Menu enables user to manipulate the image and settings. Volume : Adjust the volume of sound Treble : Adjust the sound of high tone. Bass : Adjust the sound of low tone. Balance : Adjust the balance of the Left and Right sound. Audio preset Mute : Mute on/off the sound 21

22 7.3. OSD Menu enables user to manipulate the image and settings. Osd position preset : It adjusts the position of OSD menu screen Osd h pos : It adjusts the horizontal position of OSD menu by value. Osd v pos : It adjusts the vertical position of OSD menu by value. Osd timeout : (osd turn-off time)it adjusts the time within which OSD menu disappears. You can adjust it to disappear if there is no input for maximum 1 minute. Osd background : (osd basic color) You can choose between clear and opaque for the basic color of OSD menu. 22

23 7.3. OSD Menu enables user to manipulate the image and settings. Language : You can choose one among English, Japan, Korean, German. Room lighting : Adjust the bright of Backlight. Sleep time : Set sleep timer. Factory reset : (initial set-up) It changes the set up value to the initial value at time of forwarding at the factory. 23

24 7.3. OSD Menu enables user to manipulate the image and settings. Sharpness filter : You can adjust sharpness of colors in 5 levels. Color temp : You can choose one among 5000, 7300, 9300, and user s option. Initial value is set at In case you choose user s option, you can adjust R, G, B respectively : It chooses screen tinged with red color : It chooses screen tinged with blue color. 24

25 7.3. OSD Menu enables user to manipulate the image and settings. Channel : It adjusts the channel of TV. Tune type : It adjusts the tune of TV. Fine tune : It adjusts the manual tune. Channel edit : Add or Erase of current channel. Channel search : Search of TV channel. Source : Change of Antenna or Cable. Region : Change of TV signal Area 25

26 7.4 TV Tuner (Optional) 26

27 8. PROCEDURES This part describes the installation of LDB-XXXXXHM board with panel and inverter PROCEDURES Carefully check the no. 1 index or key of mating connectors of the harness and LDB-XXXXXHM. Do not touch the output of the CCFL inverter when the LDB-XXXXXHM is turned on. Connect the RGB cable, Audio, Video and DVI connectors to the output of the each signal sources. Connect the LCD interface cable to the panel. Connect the other side of this cable to the LCD I/F connector of the PCB. Connect the backlight inverter, not supplied with this system, to the display module. Connect the input of backlight inverter to the PCB through inverter harness. Connect the OSD board to the PCB through OSD harness. Plug in the 12V DC adapter output jack to the power input connector of the PCB. Plug in the power adapter AC connector to the AC consent. Turn on the computer power Turn on the LDB-XXXXXHM board. A complete set consists of: 1. A/D controller board 2. OSD Control board 3. Backlight inverter for each LCD 4. Cable for the LCD panel Interface 5. Cable for the OSD board interface 6. Cable for the inverter Interface 7. Cable for the VGA Card interface DC/GND Power supply module 27

28 9. CUSTOMIZATION Based on customer s request, REAP supports customization for LDB-XXXXXHM board configuration, harness connection & length, DDC and OSD menu. Generally, it requires MOQ (minimum order quantity) and 1 month lead time after finalizing customization specification. Details should be agreed by both parties. 10. CONTACTS Tel Fax / rjm319@reap.co.kr Address: REAP Inc. 806, Anyang Trade Center 1107 Bisna-dong, Dongan-gu, Anyang-city, Kyunggi-Do, , KOREA 11. NUMBERING SYSTEM LDB - X1 X2 X3 X4 X5 X6 X7 X8 X9.. LDB : LCD Drive Board ( Basic Part Number ) X1 X2 X3 : Video Input source AOX : Analog RGB only VOX : Video Composite and S-video only AVX : Analog & Video AVT : Analog & Video & TV X4 X5 : Resolution VG: VGA SV: SVGA XG: XGA SX: SXGA X6 X7 : Two (2) characters of Model name TM : THEMIS HM : HERMES HB : HEBE X8 X9 : Internal Panel name Example 1) Customer needs Analog input model for Samsung LTM170E4-L01 (SXGA TFT LCD) : LDB-AOXSXTM-SS02 Example 2) Customer needs Analog & Video Input model for LG LM181E1 (SXGA TFT LCD) : LDB-AVXSXTM-LG01 Example 3) Customer needs Analog & Video Input with Low profile model for LG LM181E1 (SXGA TFT LCD) : LDB-AVXSXTM-LG01-L 28