SETi 40 Integrated Amplifier Single Ended 845 Triode User's Guide and Operating Information

Size: px
Start display at page:

Download "SETi 40 Integrated Amplifier Single Ended 845 Triode User's Guide and Operating Information"

Transcription

1 bel canto SETi 40 Integrated Amplifier Single Ended 845 Triode User's Guide and Operating Information Bel Canto Design February 1999

2 SETi 40 Single Ended 845 Triode Integrated Amplifier The Bel Canto Design SETi 40 uses the simplest and most elegant of circuit architectures with the highest quality of parts and construction to produce an integrated amplifier which is unparalleled in recreating the musical event. Contents Bel Canto Design Statement 3 Unpacking 4 Initial Setup & Assembly 5 Connection and Use of the SETi40 7 Technical Description 9 Specifications 10 Warranty Information 11 Page 2 SETi 40 Owner's Manual

3 Dedicated to Technical Virtuosity and Beauty of Music Bel Canto grew from the quest to achieve the ultimate musical satisfaction from an audio system. This quest began with the discovery of the inherent sonic qualities and musical performance potential of a nearly forgotten technology, the single-ended triode amplifier. The ability of this type of amplifier to recreate the musical experience and evoke a powerful emotional response in the listener, much like the live event, inspired the development of the SET line of amplifiers through the ultimate expression of this technology. The SETi 40 circuit was developed to be used as both a cornerstone for a modern audio system and as a reference tool to explore the reasons behind the single-ended triode amplifier's uniquely musical attributes. For the better part of a decade this quest continued and has resulted in a line of fine audio amplifiers that are designed to incorporate the unparalleled musical reproduction of the single-ended triode architecture. Bel Canto Design's goal for the SET Line is simply to provide the most expressive and powerful musical experience outside of the live event and bring some of the greatest musicians and their performances into the intimacy of your home. The SETi 40 represents the attainment of a goal and is designed to provide very high value and to retain this value for many years, both because of the quality of design and manufacturing and also the timelessness of each component's musical performance. Bel Canto Design SETi 40 Owner's Manual Page 3

4 Unpacking Unpacking The box containing your SETi 40 contains the following parts: 1 - SETi 40 User's Guide 1 - Power Cable for connection to utility power [6' 7" - 2 meters long] 1 - SETi 40 audio power amplifier power triodes in a protective box, these tubes may be shipped in a separate shipping container AX 7 driver tubes 1 - Bel Canto Owner's Warranty & Registration Card Carefully unpack each piece and check for shipping damage. If there is any damage, please contact your dealer or Bel Canto Design, Ltd. Save all packing materials as the packing is specially designed to protect the amplifier during shipping or transporting. If you lose or damage the packing materials or carton, please contact your dealer or distributor before attempting to transport the amplifiers. The SETi 40 power supply is preset for the proper national voltages before you receive it. The power cable will have the correct plug for your local power system. If you believe this is not true, please contact your dealer immediately. Do not attempt to alter or change power settings yourself!! Warning Do not connect power to this amplifier yet! This power amplifier, like any electrical component, can be dangerous and cause injury unless correct handling procedures are observed and used. Before powering this power amplifier it is necessary to read and follow proper procedures concerning its setup and use. Do not open up your SETi 40 (do not remove the chassis covers). There are no user serviceable parts inside. Any tampering of internal parts will immediately void your warranty. Immediately complete and mail the Owner's Registration Card in order to activate your warranty. Page 4 SETi 40 Owner's Manual

5 Initial Setup and Assembly! Warning 1. Never remove the bottom panel of the amplifier. There are no fuses or user serviceable components in the amplifier, and dangerous voltages could be present if the bottom cover is removed. Removal of this cover or any tampering with the amplifier will immediately void the warranty. 2. Never plug the amplifier into the power source without all tubes in place and the protective tube cover (Necessary in Europe for CE, optional in US) attached to the top plate of the chassis. 3. Always use a correctly grounded power outlet to ground the chassis of the amplifier. If there is any question about this refer to your dealer/importer or a qualified electrician. 4. Never connect the amplifier to any other audio components until directed to proceed later in this manual. -Assembling the SETi 40 requires that the 845 power triodes be placed in the tube sockets prior to plugging the amplifier into the power outlet. -NOTE: This procedure is not difficult or dangerous if done according to the following instructions, but it does require some care in handling the 845 tube. If you are unsure of yourself or would like more help than can be given in this manual, please contact your dealer, who will be pleased to help you set the SETi 40 up. All of our dealers are chosen with this service in mind, and we urge you to request dealer assistance in setting up your system. -Follow these steps in inserting or changing the 845 tube. (Total time for this procedure: approximately 15 minutes.) 1. Be certain the SETi 40 is not connected to a power source. This is the most important step! The amplifier could be damaged if power is applied without the tubes in place. Extremely dangerous voltages are present and accessible at the tube sockets if power is on! 2. Remove the 845 tube from its box. It is important for tube life that oils from your hands do not get on the upper part of the glass tube envelope. Insert the 845 into the large socket, taking care to line up the bayonet pin protruding from the metal base of the tube with the slot in the tube socket. 3. Push down on the tube until you feel that the pin has reached the bottom of the slot in the socket. Some force and slight movement of the tube may be required to get the tube to clear the contacts and go down far enough so that the tube can rotate. Do not apply too much rotational force until you are certain that the tube is down far enough. The metal tube base should protrude less than 1/4" from the top of the tube socket when the pin is at the bottom of the slot in the socket. When you are certain that the tube is in place, then rotate the tube approximately 1/8 turn in the clockwise direction. SETi 40 Owner's Manual Page 5

6 Initial Setup and Assembly (Continued) The tube should be nearly vertical or leaning slightly. NOTE: Be certain that the bayonet pin is at the bottom of the slot before applying rotational force on the tube. The pin could be damaged if too much force is applied if it is not at the bottom of the slot. Place the tube cover ring assembly over the 845 and push it home into the three sockets for the banana type plugs on the ring assembly. (Gold Ring Assembly is Optional) 4. Remove small driver tubes from their protective boxing and install by aligning the pins at the bottom of the tube with the tube socket in the amplifier chassis. Once the pins are properly aligned, push down on tube until the tube contacts the tube socket. Figure 1. Input Tube Types and Positioning One Channel Shown 12AX7 ECC83 12AX7 ECC83 Page 6 SETi 40 Owner's Manual

7 Connection and Use Input Connections / Selection On the back of the SETi 40 there are three pairs of RCA jacks for the analog inputs. The right channel is marked with a Red band and the left with a Black band. These inputs correspond with the input selector display (marked 1 2 3) located at the bottom left of the main display on the front of the SETi40. These inputs can be used for any source (CD, VCR, etc.) that has an RCA output. *All function may be activated through the use of the front panel selector buttons or the corresponding button the remote control. -Input Selection The SETi 40 provides switching for 3 sources with RCA outputs. Source selection is accomplished by pressing the INPUTS button until the input light activates above the input number (located at the lower left of the front panel display and marked ) that corresponds the desired RCA input on the back panel of the SETi40 (again marked 1 2 3). -Volume and Balance Control All controls are located in the control cluster near the center of the front panel display. Simply: Volume up is the top button in the cluster. Volume down is the bottom button in the cluster. Balance left is the left button in the cluster. Balance right is the right button in the cluster. -Muting Control Pressing the mute button will completely mute the output of the SETi 40 and activate the LED located above the Mute button on the front panel display. Pressing the mute button again will turn off the LED and resume volume at the previous volume level. Loudspeaker Connection -The loudspeaker connections use one of the two pairs of output jacks behind the output transformer on the top plate of the chassis. The output jacks accept many types of wire termination, although we recommend either a high quality spade lug or the use of simple tinned wire terminations for this hookup. -Determine the nominal impedance of your loudspeaker. The impedance selector is between the loudspeaker outputs and can be switched with music being played. The 8 ohm switch position should be used with loudspeakers that have greater than 6 ohm minimum impedance. The 4 ohm position should be used with loudspeakers with 3 to 6 ohm minimum impedance. -Power Switch / Standby Button WARNING Be certain all tubes are in position and fully installed before turning this amp on! To turn on, place the rear panel switch marked 0 1 into the 1 position. This will activate the front panel standby light above the button marked standby. By pressing the remote control or front panel standby button you may now activate your SETi 40. All tubes will light up when the SETi 40 is powered. -Tube Life and Replacement The 845 output tubes are designed for commercial use in and will provide at least 8000 hours of life as used in the SET circuit. This translates to over 5 years of typical use. The input tubes generally have 2000-hour life and will need replacement every 1 1/2 to 2 years. These tubes are available off the shelf from current production at reasonable prices. Contact your dealer or Bel Canto Design for replacement. -Standby Button Pressing the standby button will take the unit in and out of the standby mode. When in this mode all tubes and lights, except the standby LED, will be turned off and no music output. SETi 40 Owner's Manual Page 7

8 Amplifier Power and Loudspeaker Selection The SETi 40 has a nominal power rating of nearly 40 watts for each channel. While this may seem like a low power output compared to many amplifiers on the market, because of the class A operation, the low distortion, wide power bandwidth, and the grace that these amplifiers have when overdriven, they will produce as much or more level sound than many 100 watt amplifiers. We suggest that you consider any loudspeakers with average rated sensitivity of db/watt/meter or greater. Greater sensitivity will allow higher listening levels before either the amplifier or the loudspeaker runs out of steam. Remember that with many speakers in even a relatively large room the amplifiers will be operating at average levels of only 1-5 watts each with typical music at quite a high average sound level of 90 db. This leaves 15 to 17 db of amplifier headroom for musical peaks. We have successfully used the SETi 40 with many types of loudspeakers, including dynamic cone, planar magnetic and electrostatic types. When choosing a loudspeaker many variables come into play, therefore we will not attempt to recommend a type or set of brands that you should consider. Our suggestion is that you work with the dealer representing the SETi 40 and choose a loudspeaker that works well for your tastes, in your room, with your system. A dealer who sells the SETi 40 will be more than competent to guide you in your selection. Amplifier Placement and Power-on When installing the amplifiers it is important that they receive adequate ventilation. Allow at least 6 inches above the amplifiers, and be certain that the holes on the bottom cover are open to air circulation (do not place them directly on a thick carpet, as this will block the bottom ventilation holes). Do not use the SETi40 in a closed cabinet unless fan cooling is allowed or the amplifiers will overheat and could be damaged. They generate consider-able heat in operation because of their single-ended class A operation. With adequate ventilation on an open shelf or stand they will cool themselves through convection and will not require any additional cooling. When the setup is complete and all connections are made, the power cord can be installed and the power switch turned to the 'on' position. The amplifiers will be operational nearly immediately, and they require only 15 to 20 minutes to reach optimum performance. There will be a short break-in period of 20 to 30 hours when the amplifiers are first used. The sound quality potential will improve during this period as all of the components and tubes 'settle in' during this time. Further improvement in sonic performance will occur during the first 100 to 200 hours of use as the copper wire anneals and all of the components settle in. Page 8 SETi 40 Owner's Manual

9 Technical Description Circuit Description and Technical Information The philosophy behind the design of the SETi 40 is based on the observation that simplicity of the circuit and the reduction of the number of active devices in an audio amplifier will permit the greatest quantity of information to get through the amplifier. This allows the illusion of music to be most powerful and results in the amplifier 'disappearing' effectively from the playback chain. This chameleon-like performance is achieved through an elegantly simple circuit. The primary design goal of the SETi 40 was to take the idea of the single ended (SE) triode amplifier to its ultimate level, using only two triode stages to keep distortion low and reduce the number of active devices to a strict minimum, while delivering enough power so that a wide range of loudspeaker choices could be made for use in a home audio system. Unlike other high power SE triode amplifiers which use several stages of gain and buffering, the SETi 40 takes advantage of the distortion cancellation and reduction which occurs when using just two triode stages. The low distortion figures at typical playback levels of 1-5 watts are achieved with no local or loop feedback. This total absence of feedback also maximizes the amplifier's ability to transmit the information content in the music signal. Care in the choice of active and passive parts results in an audio amplifier that will remain valid in the future as fashion and taste changes. In other words, it is likely to become a 'classic,' retaining its musically satisfying performance for many years to come. This thinking begins at the power supply that uses two high value PI filters with 2-10 Henry inductors and over 150 Joules of energy storage. This provides a very quiet and well regulated supply for the output stage. The capacitors used for all high tension supplies and decoupling are the highest quality audio grade polypropylene film caps. The single coupling capacitors are custom Bel Canto film and foil units. The output stage uses the 845 triode (a tube which has seen many, many years of use as an audio amplifier in high power radio station modulators) to drive a custom output transformer which provides superb power handling and bandwidth. The 845 tube is run at maximum power in radio stations for over 8000 hours, you should get similar performance life in the SETi 40. The SETi 40 bandwidth is similar to many amplifiers which use feedback and push-pull operation to achieve good performance. The SETi 40 achieves this without resorting to these information robbing circuit techniques. The use of self bias for the 845 tube allows a higher grid resistance to be used, permitting a single high gain, relatively low power, input/driver stage. This type of bias scheme is more difficult to implement than grid bias schemes, requiring high quality, high value decoupling capacitors, large power resistors and a higher voltage on the main supply. (This voltage is near 1200 V DC on the SETi 40!) The input/driver stage uses two 12AX7s in a modified SRPP stage which provide total gain of 30 db and 1 K ohm of output impedance. This input stage can supply over 100 Vrms at low distortion into the 400 K ohm grid resistor used on the 845. The SRPP type load provides power supply rejection and reduces the sensitivity of the input stage to power supply variations. It also reduces power supply modulation and avoids the problems inherent in the use of high power/high voltage resistor load devices. SETi 40 Owner's Manual Page 9

10 SETi40 Specifications Continuous power output into 4 or 8 ohms 37 watts Peak power output >70 watts Bandwidth -3 db 6 Hz - 35 khz Class of operation Class A single-ended 845 triode Input level for 37 watts output 1.5 V rms Signal to Noise Ratio re 1 watt out 96 db A weighted Distortion at 1 watt / 1 khz <0.1% predominantly 2nd harmonic Damping Factor 3 across full bandwidth Output Impedance = 4ohms 8ohms Input configuration and impedance 100K ohm single ended RCA Gain at 8 ohm tap 21 db Power Requirement / VAC; Hz 400 VA *Voltage settings are made at our facility to correspond to requirements of the country in which the product is shipped. Size 19.5" W x 15" D x 11" H (496 mm x 381 mm x 280 mm) Weight 64 lbs. (29 kg) Page 10 SETi 40 Owner's Manual

11 Warranty Information Completion and return, by fax or mail, of your warranty papers along with a copy of the original sales receipt is the only way to receive ANY extended warranty coverage. Please return the requested documentation to Bel Canto within 15 days of original purchase. Bel Canto Design offers a 90-day warranty that can be extended to a 3-year limited warranty by simply returning, by fax or mail, your fullycompleted warranty paper along with a copy of your original sales receipt. Warranty coverage includes all parts and workmanship. Warranty is void if damage is due to abuse, neglect or unauthorized modification. All warranty work must be done by Bel Canto or authorized Bel Canto international distributor. Bel Canto Design products are uniquely identified with a serial number on the back panel or the bottom plate of each unit. This number is required to validate your warranty, please reference if service is required. If you have any questions, comments or if we can be of service, please contact us Monday through Friday 9:00 a.m. - 5:00 p.m. central time. Bel Canto Design 212 Third Avenue North, Suite 345 Minneapolis, MN Phone: Fax: Info@BelCantoDesign.com SETi 40 Owner's Manual Page 11

Orfeo 30 Single Ended 845 Triode Monobloc Audio Power Amplifier User's Guide and Operating Information

Orfeo 30 Single Ended 845 Triode Monobloc Audio Power Amplifier User's Guide and Operating Information bel canto Orfeo 30 Single Ended 845 Triode Monobloc Audio Power Amplifier User's Guide and Operating Information Bel Canto Design 10250 Valley View Road, Suite 135A Eden Prairie, MN 55344 612-942-9919

More information

bel canto SEP2 Single Ended Triode Tube Preamplifier User's Guide and Operating Information

bel canto SEP2 Single Ended Triode Tube Preamplifier User's Guide and Operating Information bel canto SEP2 Single Ended Triode Tube Preamplifier User's Guide and Operating Information Bel Canto Design 212 Third Avenue North, Suite 274 Minneapolis, MN 55401 USA Phone: 612 317.4550 Fax: 612.359.9358

More information

Pre1. Balanced Control Preamplifier. User's Guide and Operating Information

Pre1. Balanced Control Preamplifier. User's Guide and Operating Information Pre1 Balanced Control Preamplifier User's Guide and Operating Information Bel Canto Design 212 Third Avenue North Suite 345 Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 Email: Info@BelCantoDesign.com

More information

Low Noise Solid State Phono Preamplifier User's Guide and Operating Information

Low Noise Solid State Phono Preamplifier User's Guide and Operating Information Bel Canto Design PHONO 1 Low Noise Solid State Phono Preamplifier User's Guide and Operating Information Bel Canto Design 212 Third Avenue North Suite 345 Minneapolis, MN 55401 Phone: (612) 317.4550 Fax:

More information

Table of Contents. Read This First.2. Introduction by Jim Fosgate...3. Unpacking..4. Tubes and Tube shield Installation 5. Product Placement...

Table of Contents. Read This First.2. Introduction by Jim Fosgate...3. Unpacking..4. Tubes and Tube shield Installation 5. Product Placement... Owner s Manual Table of Contents Read This First.2 Introduction by Jim Fosgate...3 Unpacking..4 Tubes and Tube shield Installation 5 Product Placement...6 Connecting your Fosgate Signature..7 Phono stage

More information

COHERENCE ONE PREAMPLIFIER

COHERENCE ONE PREAMPLIFIER COHERENCE ONE PREAMPLIFIER OWNER S MANUAL TABLE OF CONTENTS Introduction Features Unpacking Instructions Installation Phono Cartridge Loading Basic Troubleshooting Technical Specifications Introduction

More information

Sphinx II. Owner s Manual. Tube Hybrid Integrated Power Amplifier. Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA Issue date: 08/01/16

Sphinx II. Owner s Manual. Tube Hybrid Integrated Power Amplifier. Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA Issue date: 08/01/16 Sphinx II Tube Hybrid Integrated Power Amplifier Owner s Manual Rogue Audio, Inc. 3 Marian Lane Brodheadsville, PA 18322 Issue date: 08/01/16 TABLE OF CONTENTS 1) Introduction 2 2) Unpacking the Sphinx

More information

110LP MOON Series. Phono Preamplifier. Owner s Manual

110LP MOON Series. Phono Preamplifier. Owner s Manual Phono Preamplifier Owner s Manual Owner s Manual I Table of Contents Introduction 4 Unpacking 5 Installation & Placement 5 Circuit Board Layout s 6 Internal Adjustments 7 Rear Panel Connections 8 Operating

More information

This Level 3 amplifier features Audio Note Silver wire and Audio Note signal capacitors. UNPACKING AND INSTALLATION

This Level 3 amplifier features Audio Note Silver wire and Audio Note signal capacitors. UNPACKING AND INSTALLATION Congratulations on your purchase of the Audio Note Meishu Line Integrated Amplifier. The Meishu is a Pure Class A Singled Ended valve amplifier that uses the highly regarded 300B direct heated triode valve.

More information

Please take a few minutes to read this manual so that you will better understand the featues and capabilities of your MF80. MF80 Owner s Manual 1

Please take a few minutes to read this manual so that you will better understand the featues and capabilities of your MF80. MF80 Owner s Manual 1 Congratulations on your purchase of the Conrad-Johnson MF80 amplifier. You have acquired one of the finer pieces of musical reproduction equipment available today. The MF80 is the result of over a decade

More information

Owner s Manual PRE1. v1.2. Triode Class A Line Preamplifier

Owner s Manual PRE1.   v1.2. Triode Class A Line Preamplifier Owner s Manual PRE1 Triode Class A Line Preamplifier www.lab12.gr v1.2 Table of Contents It is yours Features Installation & Placement Front Panel Rear Panel Remote Control Main connections For the safety

More information

CPH-10 SUBWOOFER OWNERS MANUAL

CPH-10 SUBWOOFER OWNERS MANUAL CPH-10 SUBWOOFER OWNERS MANUAL www.artcoustic.com Welcome to the world of Artcoustic! Congratulations with your purchase of the Artcoustic CPH-10 Subwoofer. The CPH-10 has an efficient design, producing

More information

Issue date : 9/11/00. Rogue Audio Tempest Vacuum Tube Integrated Amplifier. Owners Manual. Vacuum Tube Amplifiers

Issue date : 9/11/00. Rogue Audio Tempest Vacuum Tube Integrated Amplifier. Owners Manual. Vacuum Tube Amplifiers Issue date : 9/11/00 Rogue Audio Tempest Vacuum Tube Integrated Amplifier Owners Manual Vacuum Tube Amplifiers TABLE OF CONTENTS 1) Introduction 1 2) Setting up your amplifier 1 3) Using an external preamplifier

More information

VK-P10SE WARRANTY REGISTRATION FORM

VK-P10SE WARRANTY REGISTRATION FORM VK-P10SE WARRANTY REGISTRATION FORM Unit Serial Number: Customer Name: Address: Date of Purchase: Purchased From: Dealer Name: Address: IMPORTANT NOTE: In order to receive the full five-year product warranty,

More information

Valve Amplification Company

Valve Amplification Company Valve Amplification Company Standard Musicbloc 160 Monoblock Tube Amplifier Instructions 15 February 2005 Please read carefully before installing Copyright 2006 by Valve Amplification Company. All rights

More information

T L Audio. User Manual C1 VALVE COMPRESSOR. Tony Larking Professional Sales Limited, Letchworth, England.

T L Audio. User Manual C1 VALVE COMPRESSOR. Tony Larking Professional Sales Limited, Letchworth, England. T L Audio User Manual C1 VALVE COMPRESSOR Tony Larking Professional Sales Limited, Letchworth, England. Tel: 01462 490600. International +44 1462 490600. Fax: 01462 490700. International +44 1462 490700.

More information

Please take a few minutes to read this manual so that you will better understand the featues and capabilities of your MV52. MV52 Owner s Manual 1

Please take a few minutes to read this manual so that you will better understand the featues and capabilities of your MV52. MV52 Owner s Manual 1 Congratulations on your purchase of the conrad-johnson MV52 amplifier. You have acquired one of the finer pieces of musical reproduction equipment available today. You will find it to be capable of reproducing

More information

LAMM INDUSTRIES, INC.

LAMM INDUSTRIES, INC. LAMM INDUSTRIES, INC. TheLP1Si gnat ur e phono preamplifier LAMM INDUSTRIES, INC. LP1 Signature dual monaural phono preamplifier The dual monaural phono preamplifier model LP1 Signature is the ultimate

More information

H I G H D E F I N I T I O N. Reference 75 SE

H I G H D E F I N I T I O N. Reference 75 SE H I G H D E F I N I T I O N Reference 75 SE Thank you for choosing the Reference 75 SE to be a part of your high performance music listening system. Since 1970, Audio Research has been creating some of

More information

BIRD 2. Owners manual MADE IN SWEDEN

BIRD 2. Owners manual MADE IN SWEDEN BIRD 2 Owners manual 1 MADE IN SWEDEN Table of contents Introduction Marten Philosophy Unpacking Quick Setup Connecting the loudspeakers 2 3 3 4 4 5 Choosing cables Connections Burn-in Room Acoustics Positioning

More information

TABLE OF CONTENTS. 1) Introduction 2. 2) Unpacking the Ares 2. 3) Installing the Ares in your system 3. 4) Setting the Operational Parameters 4

TABLE OF CONTENTS. 1) Introduction 2. 2) Unpacking the Ares 2. 3) Installing the Ares in your system 3. 4) Setting the Operational Parameters 4 TABLE OF CONTENTS 1) Introduction 2 2) Unpacking the Ares 2 3) Installing the Ares in your system 3 4) Setting the Operational Parameters 4 5) High Output MM/MC Cartridge Setup 6 6) Medium Output Cartridge

More information

Reference 150 LINEAR

Reference 150 LINEAR Reference 150 LINEAR USER GUIDE Congratulations on your new CONSONANCE! Our products are based on a simple philosophy: The component shall reproduce the original musical sound, purely and naturally. The

More information

508 Phono Preamplifier. Boulder Amplifiers, Inc. 255 S. Taylor Ave. Louisville, CO (303) /1/2018 Rev. 1.

508 Phono Preamplifier. Boulder Amplifiers, Inc. 255 S. Taylor Ave. Louisville, CO (303) /1/2018 Rev. 1. 508 Phono Preamplifier 6/1/2018 Rev. 1.0 P/N: 91053 Boulder Amplifiers, Inc. 255 S. Taylor Ave. Louisville, CO 80027 (303) 449-8220 www.boulderamp.com About About Boulder Amplifiers, Inc. Boulder was founded

More information

INSTRUCTION MANUAL PELLERE PHONO PRE-AMPLIFIER. Extended 5-Year Warranty

INSTRUCTION MANUAL PELLERE PHONO PRE-AMPLIFIER. Extended 5-Year Warranty V1.2E INSTRUCTION MANUAL PELLERE PHONO PRE-AMPLIFIER Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable

More information

MX-206 Stereo Microphone Mixer. Operating Manual

MX-206 Stereo Microphone Mixer. Operating Manual MX-206 Stereo Microphone Mixer Operating Manual ASHLY AUDIO INC. 847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010 Toll-Free: (800) 828-6308 Fax: (585) 872-0739 www.ashly.com Operating Manual

More information

Chameleon Labs Model 7720

Chameleon Labs Model 7720 Chameleon Labs Model 7720 Stereo Compressor Owner s Manual 704 228 th Avenue NE, # 826 Sammamish, WA 98074 206-264-7602 www.chameleonlabs.com Revision C - December, 2007 UNPACKING AND INSPECTION Carefully

More information

By CHANNEL VISION. Flush Mount Amplifier A0350

By CHANNEL VISION. Flush Mount Amplifier A0350 Spkrs Local In IR In 24VDC A0350 10 The A0350 can be used with Channel Vision s CAT5 audio hubs to provide a powerful 50Watts per channel in the listening zone. Alternatively, the A0350 can be added to

More information

RoHS. Atma-Sphere Music Preamplifier. model P-2 OWNER'S MANUAL. Please study this document carefully before using equipment

RoHS. Atma-Sphere Music Preamplifier. model P-2 OWNER'S MANUAL. Please study this document carefully before using equipment 1742 Selby Av. St. Paul, MN 55104 651 690 2246 atma sphere.com Atma-Sphere Music Preamplifier model P-2 OWNER'S MANUAL Please study this document carefully before using equipment RoHS CONGRATULATIONS!

More information

The performance of a lifetime. Owner s Manual MOON 110LP v2 Phono Preamplifier

The performance of a lifetime. Owner s Manual MOON 110LP v2 Phono Preamplifier The performance of a lifetime Owner s Manual MOON 110LP v2 Phono Preamplifier MOON by Simaudio simaudio.com Simaudio Ltd 1345 Newton Road, Boucherville, Québec J4B 5H2 CANADA Date Code: 20180831 01 INTRODUCTION

More information

ModWright Instruments, Inc. PH 150 Tube Phono Stage Owner s Manual

ModWright Instruments, Inc. PH 150 Tube Phono Stage Owner s Manual ModWright Instruments, Inc. PH 150 Tube Phono Stage Owner s Manual Manufactured by ModWright Instruments, Inc. 21919 399th St., Amboy, WA 98601 USA www.modwright.com 1 CAUTIONS: Do not operate or power

More information

USER MANUAL GOLDMUND MIMESIS 32.5 Universal Acoustic Processor

USER MANUAL GOLDMUND MIMESIS 32.5 Universal Acoustic Processor USER MANUAL GOLDMUND MIMESIS 32.5 Universal Acoustic Processor Congratulations. Thank you for purchasing the Goldmund MIMESIS 32.5 UNIVERSAL ACOUSTIC PROCESSOR. You have acquired the best multi-usage acoustic

More information

Calaf integrated stereo amplifier

Calaf integrated stereo amplifier Calaf integrated stereo amplifier USER GUIDE Congratulations on your new CONSONANCE! Our products are based on a simple philosophy: The component shall reproduce the original musical sound, purely and

More information

Owner s Manual SUONO. 25W Class A Single Ended Power Amplifier. manual v1.2

Owner s Manual SUONO.   25W Class A Single Ended Power Amplifier. manual v1.2 Owner s Manual SUONO 25W Class A Single Ended Power Amplifier www.lab12.gr manual v1.2 Table of Contents It is yours Features Installation & Placement Front Panel Rear Panel Main connections Bias Setting

More information

USER MANUAL GOLDMUND METIS 7 Integrated Amplifier

USER MANUAL GOLDMUND METIS 7 Integrated Amplifier USER MANUAL GOLDMUND METIS 7 Integrated Amplifier Congratulations. Thank you for purchasing the Goldmund METIS 7. You have acquired the best multi-usage ever made for professional and domestic uses. Please

More information

Phono Amplifier brinkmann «EDISON» Manual.

Phono Amplifier brinkmann «EDISON» Manual. Phono Amplifier brinkmann «EDISON» ----------------------------------------------------------------------------------------------- Manual Preface We congratulate you on the purchase of our «EDISON» phono

More information

USER MANUAL Goldmund PH3.8 Phono Preamplifier

USER MANUAL Goldmund PH3.8 Phono Preamplifier USER MANUAL Goldmund PH3.8 Phono Preamplifier Congratulations. Thank you for purchasing the Goldmund PH3.8 Phono Preamplifier. You have acquired the best Phono Preamplifier ever made for professional and

More information

DUKE 2. Owners manual

DUKE 2. Owners manual DUKE 2 Owners manual 1 Table of contents Introduction Marten Philosophy Unpacking Quick Setup Connecting the loudspeakers 2 3 3 4 4 5 Choosing cables Connections Burn-in Room Acoustics Positioning 6 6

More information

Premier. Pre-Amplifiers. User Manual

Premier. Pre-Amplifiers. User Manual Premier Pre-Amplifiers User Manual Models Covered Phono Stage MM Head Amplifier MC Line Pre-Amplifier + Remote Version Line / Phono MM Pre-Amplifier + Remote Version Line / Phono MM Plus + Remote Version

More information

INSTRUCTION MANUAL PELLAR PHONO PRE-AMPLIFIER. Extended 5-Year Warranty

INSTRUCTION MANUAL PELLAR PHONO PRE-AMPLIFIER. Extended 5-Year Warranty V1.1E INSTRUCTION MANUAL PELLAR PHONO PRE-AMPLIFIER Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable

More information

Technical Specifications

Technical Specifications INSTALLATION SHEET AND OPERATORS MANUAL General Description: The is a mixer/preamplifier that includes 6 channels that each include a microphone input at screw terminals and an aux input at an RCA jack.

More information

A7 Owner's Manual ii

A7 Owner's Manual ii Owner s Manual Table of Contents Introduction...1 Unpacking...2 Components...3 Assembling...4 Placing Stereo Loudspeakers...6 Connecting...7 Specifications...8 Warranty...9 030519 A7 Owner's Manual ii

More information

Integre4. Audiophile integrated amplifier. v1.2

Integre4. Audiophile integrated amplifier.   v1.2 Owner s Manual Integre4 Audiophile integrated amplifier www.lab12.gr v1.2 Table of Contents It is yours Features Unpacking and Warnings Installation & Placement Front Panel Rear Panel Connections Remote

More information

H I G H D E F I N I T I O N. Reference 75 SE

H I G H D E F I N I T I O N. Reference 75 SE H I G H D E F I N I T I O N Reference 75 SE 2 Thank you for choosing the Reference 75 SE to be a part of your high performance music listening system. Since 1970, Audio Research has been creating some

More information

Mapletree Audio Design

Mapletree Audio Design Ultra 4C Preamplifier Mapletree Audio Design Ultra 4C Stereo Phono/Line Preamplifier PS 2D Power Supply User s Manual Rev. Mar. 22, 2019 Mapletree Audio Design R. R. 1, Seeley's Bay, Ontario, Canada, K0H

More information

INSTRUCTIONS FOR USE Pro-Ject Receiver Box S

INSTRUCTIONS FOR USE Pro-Ject Receiver Box S INSTRUCTIONS FOR USE Pro-Ject Receiver Box S Dear music lover, thank you for purchasing a PRO-JECT AUDIO receiver. In order to achieve maximum performance and reliability you should study these instructions

More information

Passive Four Channel Stereo/Mono Mixer/Splitter. Artcessories. User's Manual

Passive Four Channel Stereo/Mono Mixer/Splitter. Artcessories. User's Manual Passive Four Channel Stereo/Mono Mixer/Splitter Artcessories User's Manual IMPORTANT SAFETY INSTRUCTION READ FIRST This symbol, whenever it appears, alerts you to the presence of uninsulated dangerous

More information

USER MANUAL GOLDMUND PH3 Phono Preamplifier

USER MANUAL GOLDMUND PH3 Phono Preamplifier USER MANUAL GOLDMUND PH3 Phono Preamplifier Congratulations. Thank you for purchasing the Goldmund PH3 Phono Preamplifier. You have acquired the best Phono Preamplifier ever made for professional and domestic

More information

Concert Series ORDERCODE D3470 ORDERCODE D3471 ORDERCODE D3472 D3470 D3471 D3472

Concert Series ORDERCODE D3470 ORDERCODE D3471 ORDERCODE D3472 D3470 D3471 D3472 Concert Series ORDERCODE D3470 ORDERCODE D3471 ORDERCODE D3472 D3470 D3471 D3472 Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Concert Series brings excitement

More information

OPERATION NOTES FOR PSIDEX AUDIO PGP-1A PRE-AMPLIFIER DESCRIPTION INSTALLATION

OPERATION NOTES FOR PSIDEX AUDIO PGP-1A PRE-AMPLIFIER DESCRIPTION INSTALLATION OPERATION NOTES FOR PSIDEX AUDIO PGP-1A PRE-AMPLIFIER DESCRIPTION The Psidex Audio Laboratory PGP- 1A is a vacuum tube based microphone preamp and program line amplifier designed to provide solid, robust

More information

Stereo Box Pre Box Amp Box Amp Box Mono Switch Box. Tuner Box Dock Box F / V Phono Box MM Record Box USB Phono Box II

Stereo Box Pre Box Amp Box Amp Box Mono Switch Box. Tuner Box Dock Box F / V Phono Box MM Record Box USB Phono Box II Overview Box Program Stereo Box Pre Box Amp Box Amp Box Mono Switch Box Tuner Box Dock Box F / V Phono Box MM Record Box USB Phono Box II Phono Box II USB Phono Box SE II Tube Box II Tube Box SE II Head

More information

CONQUEROR STEREO POWER AMPLIFIER OWNER S INFORMATION

CONQUEROR STEREO POWER AMPLIFIER OWNER S INFORMATION CONQUEROR STEREO POWER AMPLIFIER OWNER S INFORMATION CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW UNPACKING AND INSTALLATION

More information

Ios english manual:ios english manual.qxd 07/08/ :35 Page 1

Ios english manual:ios english manual.qxd 07/08/ :35 Page 1 Ios english manual:ios english manual.qxd 07/08/2008 10:35 Page 1 Ios english manual:ios english manual.qxd 07/08/2008 10:35 Page 2 Contents Introduction...1 Design Innovation...2-3 Installation...3 Ventilation...4

More information

CP1 OAD. Owner s Manual. Stereo Control Preamplifier. Ultrafidelity

CP1 OAD. Owner s Manual. Stereo Control Preamplifier. Ultrafidelity OAD Ultrafidelity CP1 Stereo Control Preamplifier Owner s Manual Contents Section Page No. Introduction........................................................................ 1 Warnings.................................................................................

More information

MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY REFERENCE DIGITAL TO ANALOGUE CONVERTER MANLEY LABORATORIES, INC MAGNOLIA AVE. CHINO, CA.

MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY REFERENCE DIGITAL TO ANALOGUE CONVERTER MANLEY LABORATORIES, INC MAGNOLIA AVE. CHINO, CA. MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY REFERENCE DIGITAL TO ANALOGUE CONVERTER MANLEY LABORATORIES, INC 13880 MAGNOLIA AVE. CHINO, CA. 91710 TEL: (909) 627-4256 FAX: (909) 628-2482 CONTENTS SECTION

More information

Flat-Bed Module Recorders

Flat-Bed Module Recorders Flat-Bed Module Recorders Model No. 08376-50 08376-55 08376-60 0115-0192 4/28/00 Table of Contents Introduction...3 Power Requirements...3 Chart Paper Installation...3 Pen Installation...5 Grounding...5

More information

Owners Manual PERREAUX

Owners Manual PERREAUX éloquence Phono Preamplifier Owners Manual PERREAUX 1 The éloquence phono preamplifier Designed and Manufactured in Dunedin, New Zealand Table of Contents INTRODUCTION... 3 Unpacking... 4 Fitting Instructions...

More information

SATRI AMPLIFIER AMP-51R. Owner s Manual

SATRI AMPLIFIER AMP-51R. Owner s Manual SATRI AMPLIFIER AMP-51R Owner s Manual contents SAFETY INSTRUCTIONS 4 INTRODUCTION 6 OVERVIEW (FRONT PANEL) 8 OVERVIEW (REAR PANEL) 9 OVERVIEW (REMOTE CONTROL) 1 1 OPERATION 12 TROUBLESHOOTING 13 SPECIFICATION

More information

RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products.

RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products. Appendix C RS232 Protocol RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products. Baud rate 9600 or 19200 Echo status AUTO or REQUEST

More information

BP2-MM/MC Phono Preamplifier Owner s Manual

BP2-MM/MC Phono Preamplifier Owner s Manual BP2-MM/MC Phono Preamplifier Owner s Manual Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated

More information

USER MANUAL. GOLDMUND MIMESIS 20.7 D/A Converter

USER MANUAL. GOLDMUND MIMESIS 20.7 D/A Converter USER MANUAL GOLDMUND MIMESIS 20.7 D/A Converter Thank you for purchasing the Goldmund MIMESIS 20.7 D/A CONVERTER. Please take some time to read this manual. It will provide you with useful information

More information

HeadAmp 4 Pro. User s Manual. Project Series. Five Channel Headphone Amp with Listen and Talkback

HeadAmp 4 Pro. User s Manual. Project Series. Five Channel Headphone Amp with Listen and Talkback HeadAmp 4 Pro Five Channel Headphone Amp with Listen and Talkback Project Series User s Manual IMPORTANT SAFETY INSTRUCTIONS READ FIRST This symbol, wherever it appears, alerts you to the presence of

More information

Hi-fi for music lovers...

Hi-fi for music lovers... REGA RESEARCH LIMITED QUALITY HI-FI DESIGNED AND BUILT IN ENGLAND SINCE 1973. Hi-fi for music lovers... Rega Research Ltd first started making specialist Hi-Fi equipment in 1973. Back then life and the

More information

Power Source The equipment should be connected to a power supply only of the type described in this manual or as marked on the equipment.

Power Source The equipment should be connected to a power supply only of the type described in this manual or as marked on the equipment. Linear 1 Vacuum Tube Preamplifier SAFETY INSTRUCTION To avoid personal injury or damage to equipment, please ensure that you read this manual in its entirety before attempting to operate the equipment.

More information

ALLNIC AUDIO H 1500 II PLUS PHONO STAGE

ALLNIC AUDIO H 1500 II PLUS PHONO STAGE ALLNIC AUDIO H 1500 II PLUS PHONO STAGE OWNER S MANUAL ALLNIC AUDIO H-1500 II PLUS PHONO STAGE Thank you for purchasing this Allnic Audio H 1500 II PLUS Phono Stage. We are certain your trust in Allnic

More information

OWNER MANUAL PV9 VACUUM TUBE PREAMPLIFIER. conrad-johnson design

OWNER MANUAL PV9 VACUUM TUBE PREAMPLIFIER. conrad-johnson design OWNER MANUAL PV9 VACUUM TUBE PREAMPLIFIER conrad-johnson design 703-698-8581 Congratulations on your purchase of the conrad-johnson model PV9 vacuum tube preamplifier. In it, you have acquired one of the

More information

Orpheus. Phono Preamplifier. by Thrax Audio. Operating Manual. Manual issued 05/03/2012 CAUTION

Orpheus. Phono Preamplifier. by Thrax Audio. Operating Manual. Manual issued 05/03/2012 CAUTION Orpheus Phono Preamplifier by Thrax Audio Operating Manual Manual issued 05/03/2012 CAUTION THE UNIT CONTAINS NO USER SERVICEABLE PARTS. DO NOT REMOVE THE COVERS. LETHAL VOLTAGES ARE PRESENT WITHIN THE

More information

SyncGen. User s Manual

SyncGen. User s Manual SyncGen User s Manual 1 IMPORTANT SAFETY INSTRUCTION READ FIRST This symbol, whenever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure-voltage that may be sufficient

More information

TUBE MIX FIVE CHANNEL MIXER WITH USB AND ASSIGNABLE 12AX7 TUBE. User's Manual

TUBE MIX FIVE CHANNEL MIXER WITH USB AND ASSIGNABLE 12AX7 TUBE. User's Manual TUBE MIX FIVE CHANNEL MIXER WITH USB AND ASSIGNABLE 12AX7 TUBE User's Manual IMPORTANT SAFETY INSTRUCTIONS READ FIRST This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous

More information

clipping; yellow LED lights when limiting action occurs. Input Section Features

clipping; yellow LED lights when limiting action occurs. Input Section Features ELX-1A Rack-Mount Mic/Line Mixer Four inputs, one output in a single rack space Very-highery-high-quality audio performance High reliability Extensive filtering circuitry and shielding protect against

More information

Absolute performance 1

Absolute performance 1 Absolute performance 1 Design is in the detail Since 1972 Monitor Audio has been at The grille-less design ensures the speaker s the leading edge of loudspeaker design voice is clear and true, and lets

More information

Hegel HD20 High End D/A Converter

Hegel HD20 High End D/A Converter Hegel HD20 High End D/A Converter www.hegel.com info@hegel.com USER GUIDE Congratulations on your new HEGEL! Every Hegel product is based on a simple philosophy: The audio reproduction instrument shall

More information

MclNTOSH MODEL C-4 and C-4P

MclNTOSH MODEL C-4 and C-4P INSTRUCTION MANUAL MclNTOSH MODEL C-4 and C-4P AUDIO COMPENSATORS McINTOSH LABORATORY, INC. 320 Water St. Binghamton, N. Y. U.S.A. - 1 - INSTRUCTION MANUAL McINTOSH MODEL C-4 and C-4P AUDIO COMPENSATORS

More information

INSTRUCTION MANUAL. Extended 5-Year Warranty

INSTRUCTION MANUAL. Extended 5-Year Warranty V2.1E INSTRUCTION MANUAL PULSARE II PHONO PRE-AMPLIFIER Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable

More information

MANLEY LABORATORIES, INC.

MANLEY LABORATORIES, INC. MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY LAB SERIES MONOBLOCK 100 WATT AMPLIFIER MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 TEL: (909) 627-4256 FAX: (909) 628-2482 CONTENTS SECTION

More information

12 Channel Media Splitter MS12 Mk2 User manual

12 Channel Media Splitter MS12 Mk2 User manual 12 Channel Media Splitter MS12 Mk2 User manual 01. 12 Channel Media Splitter MS12 Mk2 An audio distribution amplifier primarily designed to feed multiple ENG cameras from a single lectern microphone at

More information

.Power Distribution Center. PD-1. Instruction Manual

.Power Distribution Center. PD-1. Instruction Manual .Power Distribution Center. PD-1 Instruction Manual www.datavideo-tek.com 1 Contents Warnings and Precautions... 3 Warranty... 4 Standard Warranty... 4 Two Year Warranty... 4 Disposal... 4 Packing List...

More information

PHOENIX AUDIO. Owner s Manual

PHOENIX AUDIO. Owner s Manual PHOENIX AUDIO Costa Mesa CA 92262 USA Telephone +1 866 302 1091 Email :sales@phoenixaudio.net Owner s Manual Firstly, let us congratulate you on your purchase of the Ascent-Two Microphone Pre- Amplifier.

More information

Owner s Manual. Model PH8 Phono Preamplifier

Owner s Manual. Model PH8 Phono Preamplifier Owner s Manual Model PH8 Phono Preamplifier 2 Contents Model PH8 Phono Preamplifier Illustrations 4 Preface 5 Warnings 5 Packaging 5 Front Panel Controls 5 6 Remote Control Functions 6 Connections 6 Installation

More information

Operating Manual. Mark Levinson Nº25 Dual Monaural Phono Preamplifier. Madrigal Audio Laboratories, Inc. 1

Operating Manual. Mark Levinson Nº25 Dual Monaural Phono Preamplifier. Madrigal Audio Laboratories, Inc. 1 Operating Manual Mark Levinson Nº25 Dual Monaural Phono Preamplifier Madrigal Audio Laboratories, Inc. 1 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

More information

We extend our regards from Bochum and wish you much musical satisfaction from your new EINSTEIN The Absolute Tune.

We extend our regards from Bochum and wish you much musical satisfaction from your new EINSTEIN The Absolute Tune. Dear customer! With the EINSTEIN The Absolute Tune stereo integrated amplifier, you have acquired that rarest of Hifi components one that conforms to the most stringent standards of electrical design and

More information

M3 Phono PRE AMPLIFIER OWNER S INFORMATION

M3 Phono PRE AMPLIFIER OWNER S INFORMATION M3 Phono PRE AMPLIFIER OWNER S INFORMATION CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW 5) UNPACKING AND INSTALLATION

More information

BP2-MM MM Phono Preamplifier Owner s Manual

BP2-MM MM Phono Preamplifier Owner s Manual BP2-MM MM Phono Preamplifier Owner s Manual Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated

More information

USB Phono Plus. Project Series USER S MANUAL. Audiophile Computer Interface

USB Phono Plus. Project Series USER S MANUAL. Audiophile Computer Interface USB Phono Plus Audiophile Computer Interface Project Series USER S MANUAL IMPORTANT SAFETY INSTRUCTION READ FIRST This symbol, whenever it appears, alerts you to the presence of uninsulated dangerous voltage

More information

INSTRUCTION MANUAL PULSARE PHONO PRE-AMPLIFIER. Extended 5-Year Warranty

INSTRUCTION MANUAL PULSARE PHONO PRE-AMPLIFIER. Extended 5-Year Warranty V1.3E INSTRUCTION MANUAL PULSARE PHONO PRE-AMPLIFIER Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable

More information

OPERATOR MANUAL OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM

OPERATOR MANUAL OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM PTY. LTD A.B.N. 83 003 020 504 OPERATOR MANUAL OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM OSD390 SERIES 4 CHANNEL VIDEO/AUDIO/DATA FIBER OPTIC TRANSMISSION SYSTEM Document

More information

OTO Phono SE Signature

OTO Phono SE Signature OTO Phono SE Signature INTEGRATED AMPLIFIER OWNER S INFORMATION CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW UNPACKING

More information

INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION

INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION 1 INTRODUCTION PRODUCT CONCEPT AND DESCRIPTION The Audio Suite is a mainframe which accepts up to ten modular sections thereby permitting individualized selection of preamplifier features and functions.

More information

INSTRUCTION MANUAL PULSUS PHONO PRE-AMPLIFIER. Extended 5-Year Warranty

INSTRUCTION MANUAL PULSUS PHONO PRE-AMPLIFIER. Extended 5-Year Warranty V1.3E INSTRUCTION MANUAL PULSUS PHONO PRE-AMPLIFIER Extended 5-Year Warranty AVID is pleased to extend the normal warranty duration to 5-Years from the date of original shipping. This warranty is transferable

More information

PRO VLA PROFESSIONAL TWO CHANNEL VACTROL/TUBE LEVELING AMPLIFIER

PRO VLA PROFESSIONAL TWO CHANNEL VACTROL/TUBE LEVELING AMPLIFIER PRO VLA PROFESSIONAL TWO CHANNEL VACTROL/TUBE LEVELING AMPLIFIER USER S GUIDE TABLE OF CONTENTS Introduction 2 Registration 2 Features 3 Overview 4 Setting Up 5 Unpacking 5 AC Power Hookup 5 Audio Connections

More information

Caspian M2 Integrated Amplifier User Manual. Roksan Audio Ltd

Caspian M2 Integrated Amplifier User Manual. Roksan Audio Ltd Caspian User Manual Roksan Audio Ltd Jubilee Close Townsend Lane London NW9 8TR Tel: +44 (0)20 8900 6801 Fax: +44 (0)20 82052644 Email: info@roksan.co.uk Web: www.roksan.co.uk INTRODUCTION Congratulations

More information

MEISHU Phono INTEGRATED AMPLIFIER OWNER S INFORMATION

MEISHU Phono INTEGRATED AMPLIFIER OWNER S INFORMATION ! MEISHU Phono INTEGRATED AMPLIFIER OWNER S INFORMATION CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW UNPACKING AND INSTALLATION

More information

Owner's Manual. Model PH6 PHONO PREAMPLIFIER.

Owner's Manual. Model PH6 PHONO PREAMPLIFIER. Owner's Manual Model PH6 PHONO PREAMPLIFIER 3900 ANNAPOLIS LANE NORTH / PLYMOUTH, MINNESOTA 55447-5447 / PHONE: 763-577-9700 FAX: 763-577-0323 www.audioresearch.com Contents Model PH6 Page No. Preface.......................................................1

More information

INTEGRATED AMPLIFIER INSTRUCTIONS FOR USE

INTEGRATED AMPLIFIER INSTRUCTIONS FOR USE INTEGRATED AMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity Amplifier. Used properly and carefully, it should give you many years of outstanding musical reproduction. The is

More information

AG 500SC. Owners Manual. Manual Version 1.7

AG 500SC. Owners Manual. Manual Version 1.7 AG 500SC Owners Manual Manual Version 1.7 1. Table of Contents I. Getting Started page 3. A. Safety Instructions B. Manual Conventions C. Basic Setup D. Protection Modes II. Features and Functions page

More information

M8 Phono Balanced CD Input

M8 Phono Balanced CD Input M8 Phono Balanced CD Input PRE AMPLIFIER OWNER S INFORMATION CONTENTS 1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERVIEW 5) UNPACKING

More information

RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products.

RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products. Appendix C RS232 Protocol RS232 settings are internally definable via jumper blocks, to accommodate interfacing with a wide range of control products. Baud rate 96ØØ or 192ØØ Echo status AUTO or REQUEST

More information

Hegel HD10 High End D/A Converter

Hegel HD10 High End D/A Converter Hegel HD10 High End D/A Converter www.hegel.com info@hegel.com USER GUIDE Congratulations on your new HEGEL! Every Hegel product is based on a simple philosophy: The audio reproduction instrument shall

More information

MANUAL ENGLISH Core Club Ordercode: D2314

MANUAL ENGLISH Core Club Ordercode: D2314 MANUAL ENGLISH Core Club Ordercode: Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands Table of contents Warning... 2 Unpacking Instructions... 2 Safety Instructions... 2 Operating

More information

Rhea PHONO STAGE. Aesthetix Audio Corporation 5220 Gabbert Rd., Suite A Moorpark, CA Phone: (805)

Rhea PHONO STAGE. Aesthetix Audio Corporation 5220 Gabbert Rd., Suite A Moorpark, CA Phone: (805) Rhea PHONO STAGE Aesthetix Audio Corporation 5220 Gabbert Rd., Suite A Moorpark, CA. 93021 Phone: (805) 529-9901 INTRODUCTION Thank you for purchasing the Rhea Phono Stage. The Rhea is a groundbreaking

More information

MODEL PA II-R (1995-MSRP $549.00)

MODEL PA II-R (1995-MSRP $549.00) F O R T H E L O V E O F M U S I C MODEL PA II-R (1995-MSRP $549.00) OWNER'S MANUAL AND INSTALLATION GUIDE INTRODUCTION To aid in the exciting and custom installs which installers are performing all over

More information