Section COMMUNICATION EQUIPMENT ROOM FITTINGS. Section Communications Cable Management and Ladder Rack
|
|
|
- Marian Booth
- 5 years ago
- Views:
Transcription
1 PART 1 GENERAL 1.1 WORK INCLUDED Section COMMUNICATION EQUIPMENT ROOM FITTINGS Section Communications Cable Management and Ladder Rack A. Provide all labor, materials, and equipment for the complete installation of work called for in the Contract Documents. 1.2 SCOPE OF WORK A. This section includes the minimum requirements for the equipment and cable installations in communications equipment rooms (Telecommunications Closets). B. Included in this section are the minimum composition requirements and installation methods for the following: 1. Cable Management 1.3 QUALITY ASSURANCE A. All cable and equipment shall be installed in a neat and workmanlike manner. All methods of construction that are not specifically described or indicated in the contract documents shall be subject to the control and approval of the Owner or Owner Representative. Equipment and materials shall be of the quality and manufacture indicated. The equipment specified is based upon the acceptable manufacturers listed. Where approved equal is stated, equipment shall be equivalent in every way to that of the equipment specified and subject to approval. B. Strictly adhere to all Building Industry Consulting Service International (BICSI), Electronic Industries Alliance (EIA) and Telecommunications Industry Association (TIA) recommended installation practices when installing communications/data cabling. C. Material and work specified herein shall comply with the applicable requirements of: 1. ANSI/TIA/EIA 568-B Commercial Building Telecommunications Cabling Standard, TIA 569-B Commercial Building Standard for Telecommunications Pathways and Spaces, ANSI/TIA/EIA 606-A Administration Standard for the Telecommunications Infrastructure of Commercial Buildings, ANSI-J-STD 607-A Joint Standard for Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications, Communications Cable Management
2 5. NFPA 70 National Electric Code, BICSI Telecommunications Distribution Methods Manual, 10 th Edition, ANSI/NECA/BICSI Standard for Installing Commercial Building Telecommunications Cabling 1.4 SUBMITTALS A. Provide product data for the following: 1. Manufacturers data/cut sheets, specifications and installation instructions for all products (submit with bid). PART 2 PRODUCTS 2.1 CABLE MANAGEMENT A. Vertical Cable Management for Racks/Frames (MCS Master Cabling Section) 1. Every rack/frame will have a minimum of one vertical cable manager. The vertical cable manager will create a space for storing and organizing cables along the side of the rack/frame. The cable manager will maintain separation between patch/equipment/jumper cords and premise cables. 2. The cable manager will be sized to match cabling requirements. The initial quantity of cables within the cable manager will not exceed a whole number value equal to 40% of the interior area of the cable manager. 3. A single vertical cable manager can be used in between bayed racks/frames if it is sized to match cable requirements for both racks/frames. The manufacturer will state estimated cable fills for the cable manager in the product data sheet. 4. The vertical cable manager will match the height of the rack(s)/frame(s). 5. The vertical cable manager will bolt to the side of racks/frames with included hardware. The manufacturer of the vertical cable manager will sell compatible racks/frames. 6. The vertical cable manager will be a single-sided C-shaped trough with a cover or a double-sided H-shaped trough with covers. The single-sided trough will provide a single pathway. The double-sided trough will provide independent front and rear cable pathways and will have multiple evenly-spaced edge-protected front-to-rear cable pass-through holes for cables in the center divider. 7. The cover will be removable, hinged to open from the right or left side and will include a latch that will secure the cover in the closed position Communications Cable Management
3 8. The vertical cable manager will have cable openings along both sides of the trough. The openings will be formed by evenly-spaced T-shaped cable guides. The T-shaped cable guides will be made from a composite plastic material (not metal) and will have rounded edges to protect cables. When the cable manager is attached to a rack/frame, each cable opening will align with a rack-mount space (RMU) on the rack/frame. Each opening will pass a minimum of 24 each.25 OD patch cords. 9. The cable manager will be delivered individually boxed, and available in several widths as specified below and in the contract documents. 10. The vertical cable manager shall be manufactured from sheet aluminum and composite materials. 11. Finish shall be clear grained aluminum or epoxy-polyester hybrid powder coat paint in the color as specified below and in the contract documents. Edge-protectors, T-shaped cable guides and latch hardware is black. 12. Design Make: Chatsworth Products, Inc. (CPI), MCS Master Cabling Section: Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 66 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 72 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 78 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 84 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 90 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 96 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 108 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 66 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 72 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 78 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 84 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 90 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 96 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 4.4 Wide x 108 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 66 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 72 High x 8.1 Deep, Clear Communications Cable Management
4 Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 78 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 84 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 90 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 96 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 108 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 66 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 72 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 78 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 84 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 90 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 96 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 6 Wide x 108 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 66 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 72 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 78 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 84 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 90 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 96 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 108 High x 8.1 Deep, Clear. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 66 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 72 High x 8.1 Deep, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 78 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 84 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 90 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 96 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Single-Sided, 10 Wide x 108 High x 8.1 D, Black Communications Cable Management
5 Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 66 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 72 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 78 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 84 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 90 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 96 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 108 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 66 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 72 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 78 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 84 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 90 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 96 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 4.4 Wide x 108 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 66 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 72 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 78 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 84 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 90 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 96 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 108 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 66 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 72 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 78 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 84 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 90 High x 8.1 D, Black Communications Cable Management
6 Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 96 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 6 Wide x 108 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 66 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 72 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 78 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 84 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 90 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 96 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 108 High x 8.1 D, Clear. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 66 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 72 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 78 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 84 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 90 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 96 High x 8.1 D, Black. Part Number , MCS Master Cabling Section, Double-Sided, 10 Wide x 108 High x 8.1 D, Black. PART 3 EXECUTION 3.1 INSTALLATION A. Vertical Cable Management 1. Attach vertical cable managers to the side of the rack/frame using the manufacturer s installation instructions and included hardware. 2. When a single vertical cable manager is used in between two racks/frames, attach the vertical cable manager to both racks/frames. 3. When more than one cable manager is used on a rack/frame or group of racks/frames, use the same make, style and size of vertical cable manager on the rack/frame or in between racks/frames. 4. The color of the rack(s)/frame(s) and cable manager(s) must match. 5. Doors should be attached to the cable manager and in the closed position after cabling is complete Communications Cable Management
A. All communications equipment rooms shall be installed in a neat and workmanlike manner.
SECTION 27 11 00 - COMMUNICATIONS EQUIPMENT ROOM FITTINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
CABLE MANAGEMENT PRODUCTS Cable Managers & Accessories
CABLE MANAGEMENT PRODUCTS Cable Managers & Accessories Evolution Cable Management Page 5-3 Velocity Cable Management Page 5-8 Velocity Standard Pack Page 5-12 Vertical Cable Management Page 5-13 Global
BILOXI PUBLIC SCHOOL DISTRICT. Biloxi Junior High School
BILOXI PUBLIC SCHOOL DISTRICT Biloxi Junior High School Request for Proposals E-Rate 2014-2015 - Internal Connections Submit Proposals To: Purchasing Department Attn: Traci Barnett 160 St. Peter Street
SECTION COMMUNICATIONS HORIZONTAL CABLING
SECTION 271500 COMMUNICATIONS HORIZONTAL CABLING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. UTP cabling. 2. Telecommunications outlet/connectors including patch panels. 3. Cabling identification
SECTION TESTING, IDENTIFICATION AND ADMINISTRATION
PART 1 - GENERAL 1.1 SUMMARY SCOPE SECTION 25170 TESTING, IDENTIFICATION AND ADMINISTRATION 1. This section includes the minimum requirements for the testing, certification administration and identification
STRUCTURED CABLE SYSTEM (SCS)
PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such construction, all materials and equipment incorporated
California Polytechnic State University ITS Telecommunications PART 1 GENERAL SECTION AUDIO VISUAL STATION CABLES 1.
PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such construction, all materials and equipment incorporated
Cable and Power Management Open-Frame Rack Cable Managers
Spec-001 Cable and Power Management Open-Frame Rack Cable Managers CABLETEK Horizontal Cable Manager DCHD shown DCHS4 shown Arrowhead fingers funnel cable into base and hold it securely Vertical and horizontal
The University of Texas at Austin September 30, 2011
SECTION 27 08 20 COPPER TESTING PART 1 - GENERAL 1.1 SUMMARY A. Test measurements shall be taken for all balanced-twisted pair cabling, including horizontal and backbone copper cables and wall-to-rack
ADDENDUM NO. 2 This addendum consists of 8 pages. Kenai Peninsula Borough Purchasing & Contracting
KENAI PENINSULA BOROUGH Purchasing and Contracting 144 North Binkley Street Soldotna, Alaska 99669-7520 Toll-free within the Borough: 1-800-478-4441, Ext. 2260 PHONE: (907) 714-2260 FAX: (907) 714-2373
Coastal Carolina University RE-BID WILLIAMS BRICE RENOVATION AND REPAIR October 19, 2018 Construction Documents
PART 1 - GENERAL 1.1 SUMMARY SECTION 271500 COMMUNICATIONS HORIZONTAL CABLING A. Section Includes: 1. UTP cabling. 2. Telecommunications outlet/connectors. 3. Cabling system identification products. 1.2
UNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-27 05 14.00 10 (April 2006) -------------------------------- Preparing Activity: USACE Superseding UFGS-27 05 14.00 10 (April 2004) UNIFIED FACILITIES GUIDE SPECIFICATIONS
SPECIAL SPECIFICATION :1 Video (De) Mux with Data Channel
1993 Specifications CSJ 0924-06-223 SPECIAL SPECIFICATION 1160 8:1 Video (De) Mux with Data Channel 1. Description. This Item shall govern for furnishing and installing an 8 channel digital multiplexed
WJHW, Inc. 6 April 2016 Texas Tech University Issue for CD Set Sports Performance Complex Lubbock, Texas
SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATIONS SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Provide materials, labor, and methods for telecommunications grounding and bonding system in accordance with
Section Communications Optical Fiber Backbone Cabling
Part 1 1.1 Related Documents 1.1.1 Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specifications Sections apply to this Section. 1.2 Related
UNIVERSITY of NORTH DAKOTA LOW VOLTAGE COMMUNICATIONS STANDARDS FOR CABLING, PATHWAYS, AND SPACE
UNIVERSITY of NORTH DAKOTA LOW VOLTAGE COMMUNICATIONS STANDARDS FOR CABLING, PATHWAYS, AND SPACE Prepared in cooperation and approval from BICSI Building Industry Consulting Services International and
SECTION FIBER OPTIC STATION CABLES
PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications shall include all labor necessary to perform and complete such construction, all materials and equipment incorporated
CASS COUNTY, MICHIGAN CASSOPOLIS, MI REQUEST FOR PROPOSAL SPECIFICATIONS
CASS COUNTY, MICHIGAN CASSOPOLIS, MI REQUEST FOR PROPOSAL SPECIFICATIONS Cass County, Michigan invites qualified vendors to submit proposals for the purchase, installation, and programming of a centralized
SECTION TESTING OF COPPER CABLES
SECTION 27 08 13 TESTING OF COPPER CABLES PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such construction,
REQUEST FOR QUOTE: TELECOMMUNICATIONS CABLING Library/Classroom Building, Beltline Campus
REQUEST FOR QUOTE: TELECOMMUNICATIONS CABLING Library/Classroom Building, Beltline Campus PART 1: GENERAL REQUIREMENTS A. Contractor Work 1. Provide and install (except as noted in this document), cable,
Minimum qualifications for the Telecommunications Engineer are: A. Texas Licensed Profession Engineer (PE)
PART 1: GENERAL 1.01 Telecommunications Engineer Minimum qualifications for the Telecommunications Engineer are: A. Texas Licensed Profession Engineer (PE) B. Registered Communications Distribution Designer
UNM IT/Telecommunications Guide Specification Labeling 11/07/
Labeling 1 PART 1: GENERAL 1.01 SCOPE OF WORK A. Work covered by this Section shall consist of furnishing labor, equipment, supplies, materials, and testing unless otherwise specified, and in performing
Division 27 COMMUNICATION/DATA, PATHWAYS, AND WIRING
Revision 05/01/2017 Division 27 COMMUNICATION/DATA, PATHWAYS, AND WIRING PART 1 GENERAL 1.1 SECTION INCLUDES A. Voice, Data, and Fiber Cable Product materials B. Voice, Data, and Fiber Cable Execution
PROJECT SPECIFICATIONS UCO STEM TEACHING AND RESEARCH CENTER AV PACKAGE
SECTION 27 00 05 AV PACKAGE SPECIFICATIONS TITLE SHEET AND TABLE OF CONTENTS PROJECT SPECIFICATIONS UCO STEM TEACHING AND RESEARCH CENTER AV PACKAGE UNIVERSITY OF CENTRAL OKLAHOMA 100 NORTH UNIVERSITY
DESIGN!!GUIDELINES!!!!!
DESIGNGUIDELINES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 1. Testing General 1.1. For acceptance, 100% of the media
CASS COUNTY, MICHIGAN CASSOPOLIS, MI REQUEST FOR PROPOSAL SPECIFICATIONS
CASS COUNTY, MICHIGAN CASSOPOLIS, MI REQUEST FOR PROPOSAL SPECIFICATIONS Cass County, Michigan invites qualified vendors to submit proposals for the purchase, installation, and programming of: a door card
Primex Wireless, Inc. July, Wells Street Lake Geneva, WI
Division 0 0 0 0 Primex Wireless, Inc. July, 00 Wells Street Lake Geneva, WI 00--0 www.primexwireless.com Product Guide Specification Specifier Note: This product specification is written according to
Request for Proposal (RFP)
Request for Proposal (RFP) Data Network for OCMS 017 Inquiries and requests regarding this RFP should be directed to: Michael Hale Technology Director Oconee County Schools PO Box 16 5-A School Street
Liberty Mutual Structured Cabling Specification Bid and Build Structured Cabling Technical Specification for:
Bid and Build Structured Cabling Technical Specification for: Horizontal & Backbone Requirements Page 1 of 30 PUBLICATION RECORD Document Version Publication Date Primary Author Description Revision 1.0
BUSD Ramona Middle School Gymnasium Project AV Project
BUSD Ramona Middle School Gymnasium Project AV Project Scope: Provide all part necessary for the completion of an AV System for the new Middle School Gymnasium per the attached parts lists and drawings.
SECTION TELECOMMUNICATIONS INFRASTRUCTURE
PART 1 - GENERAL 1.1 SUMMARY A. The telecommunications (telecom) infrastructure provides the basic infrastructure for the transport of voice and data signals throughout the facility. This is often regarded
SPECIAL SPECIFICATION 8540 Telecommunication Cable
2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,
Telecommunciations Infrastructure Project September 20, A. Broadband radio frequency active and passive components
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Broadband radio frequency active and passive components B. Broadband optical active and passive components C. Coaxial cable and connectors D. Support and termination
MIDDLESEX COUNTY COLLEGE WIRE AND CABLE NETWORK REQUIREMENTS BH, CB, CH, ED, MH, LH, Camera Project
1.1.0 GENERAL The purpose of this specification is to establish a requirement for the installation of a voice, video and data cable network. The cable (copper), wire, hardware, equipment racks, jumpers,
6000 Series Patch Panel Terminating Instructions
6000 Series Patch Panel Terminating Instructions INTRODUCTION The 6000 Series patch panels include a unique feature not found on any other patch panel. This feature allows you to angle each of the four
SECTION COMMUNICATIONS CABLING. (Sub-Sub-Bid Required, Part of Sub-Bid Section ELECTRICAL)
SECTION 270000 (Sub-Sub-Bid Required, Part of Sub-Bid Section 260001-ELECTRICAL) PART 1 - GENERAL... 3 1.01 GENERAL REQUIREMENTS... 3 1.02 RELATED DOCUMENTS... 3 1.03 SECTION INCLUDES... 4 1.04 RELATED
Public Works Division Lighting District Fiber Optic Specifications April 2009
Public Works Division Lighting District Fiber Optic Specifications April 2009 7000 Florida Street Punta Gorda, Florida 33950 Tele: 941.575.3600 Fax : 941.637.9265 www.charlottecountyfl.com/publicworks
DS1 Cross-Aisle Panel
DS1 Cross-Aisle Panel Model 005-0005-0100 Installation Guide 1.1 Overview 1.1.1 Inspection Compare the contents of the DS1 Cross-Aisle Panel shipping container with the packing list. Call Telect if anything
Effective earthing of screened cables
NOVEMBER 2006 Effective earthing of screened cables All metallic containment items, other extraneous metalwork and the screens of telecommunications cables in an information technology environment must
SPECIAL SPECIFICATION 6559 Telecommunication Cable
2004 Specifications CSJ 0015-09-147, etc. SPECIAL SPECIFICATION 6559 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing, training,
SECTION 683 VIDEO OPTICAL TRANSCEIVER WITH BI-DIRECTIONAL DATA CHANNEL DESCRIPTION
683 SECTION 683 VIDEO OPTICAL TRANSCEIVER WITH BI-DIRECTIONAL DATA CHANNEL DESCRIPTION 683.01.01 GENERAL A. The Contractor shall furnish the designated quantity of Video Optical Transceiver (VOTR) pairs
IEEE 802.3af Power via MDI Standard Compliant Mid-Span Insertion Solution. Presented by PowerDsine: David Pincu -
IEEE 802.3af Power via MDI Standard Compliant Mid-Span Insertion Solution Presented by PowerDsine: David Pincu - davidp@powerdsine.com Objectives! Investigate the Channel /Link options! Identify the requirements
WaveTrax. Fiber Cable Management System
Table of Contents Overview...3 Trough...4 Trough Cover...4 Trough Notching Tool...4 FastLock Coupler...4 Competitive FastLock Coupler...5 Horizontal Elbow...5 Horizontal Elbow Cover...5 Horizontal T...5
Pre-bid Supplement #01 Communications Specifications and Additional Scope Project Bid: CM Date: 05/26/2017
Pre-bid Supplement #01 Communications Specifications and Additional Scope Project Bid: CM-2017-2 Date: 05/26/2017 Additional specification information for data communication to cameras and between Library
SOLICITATION ADDENDUM NO. 1 ITB THE FOLLOWING CHANGES TO THE ABOVE CITED SOLICITATION ARE ANNOUNCED.
Beaverton School District Capital Program Purchasing 16550 SW Merlo Road, Beaverton, OR 97006 Phone: 503-591-4539 SOLICITATION ADDENDUM NO. 1 ITB 15-0012 THE FOLLOWING CHANGES TO THE ABOVE CITED SOLICITATION
PREMIUM 5e F/UTP PRODUCTS
Siemon s end-to-end cabling system is guaranteed to provide transmission performance margins in excess of industry standards for category 5e parameters, while featuring excellent EMI resistance. has been
STRAND LIGHTING 200F 7-INCH TUNGSTEN LED TELEVISION FRESNEL SPECIFICATION.
STRAND LIGHTING 200F 7-INCH TUNGSTEN LED TELEVISION FRESNEL SPECIFICATION. GENERAL. A.) Overview. 1) The Television Fresnel fixture shall be purpose designed for television and studio lighting applications.
Colorado River Union High School District 1004 Hancock Rd Bullhead City, AZ (928)
Colorado River Union High School District 1004 Hancock Rd Bullhead City, AZ 86442 (928) 758-3961 NOTICE OF REQUEST FOR PROPOSAL RFP NAME: 2018 MHS Office Low Voltage. MATERIAL OR SERVICE: CRUHSD is seeking
Data Network Wiring Standard. Part 1: General Section Includes Publications and Standards
Part 1: General 1.01 Section Includes A. Fiber Optic Cable B. Fiber Optic Distribution Cabinets C. Interbuilding Fiber Optic Cabling/Patch Cords D. Fiber Optic Connectors E. Interbuilding Distribution
Tender Report for Supply and installation of LAN in *Biomedical Imaging and Bioinformatics Lab*
Tender Report for Supply and installation of LAN in *Biomedical Imaging and Bioinformatics Lab* General Scope of Work: Supply and installation of Computer Laboratory setup in MIU Location of Installation:
CABLING STANDARDS FOR
RFB for Wiring in the Outagamie County Courtrooms Attachment B September 1, 2016 CABLING STANDARDS FOR GENERAL The purpose of this document is to provide guidelines for all structured cable installations
TITLE: FIBER OPTIC SHOCK FIXTURES
ENGINEERING PRACTICE STUDY TITLE: FIBER OPTIC SHOCK FIXTURES 18 January 2007 STUDY PROJECT 60GP-2006-019 FINAL REPORT Study Conducted By Dave Leight DSCC-VAT Fiber Optic Group Prepared by: Dave Leight
Furnish & Install Video Surveillance System for Lot B. Exhibits
C-1443 Furnish and Install Video Surveillance System for Lot B Ernest N. Morial New Orleans Exhibition Hall Authority 900 Convention Center Boulevard New Orleans, LA 70130 ADDENDUM NO. 1 Project Name:
ADDENDUM NUMBER 02 TO THE BID DOCUMENTS. BID DOCUMENT: RFP #G PE Building Audio Visual System San Jose City College
ADDENDUM NUMBER 02 TO THE BID DOCUMENTS To all general contract bidders of record on the Bid Proposal: BID DOCUMENT: RFP #G2010.0160 PE Building Audio Visual System Addendum Date: January 24, 2017 A. This
Request for Quote E- Rate Eligible Services Scope of Work - Wireless LAN and Cabling for Access Points
Request for Quote E- Rate Eligible Services Scope of Work - Wireless LAN and Cabling for Access Points Due Date: Allowable Contract Date from Posted 470 The Palo Verde Elementary School District is requesting
NYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 15 00 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION MEDIUM VOLTAGE CABLE INSTALLATION. 1. Section Underground Ducts and Manholes.
SECTION 33 71 49.23 MEDIUM VOLTAGE CABLE INSTALLATION PART 1 GENERAL 1.1 SCOPE A. Work included in this Section: Medium Voltage Cable (4 kv and 12 kv) Installation and Termination. Removal and return of
Technical Specifications Florida Gulf Coast University
Technical Specifications Florida Gulf Coast University 9/19/2018 Page 1 of 21 Approved Vendors (alphabetical order) Aztek (CIP) Certified Installer Plus Mr. Scott Coyne 4730 Enterprise Avenue Suite #308
University Center AV Integration Construction Documents February 8, 2012
SECTION 27 41 30 AUDIOVISUAL ARCHITECTURAL SPACES PART 1 GENERAL 1.01 SUMMARY A. This Section defines the Audiovisual System requirements for Audiovisual Systems within Architectural Spaces. 1.02 RELATED
IndyGo Facility Upgrades Project 35671EE
SECTION 260553 IDENTIFICATION FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Identification for raceways. 2. Identification of power and control cables. 3. Identification for
SECTION COMMUNICATIONS HORIZONTAL CABLING
SECTION 27 15 00 COMMUNICATIONS HORIZONTAL CABLING PART 1 GENERAL 1.1 RELATED DOCUMENTS AND SECTIONS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Request for Quote E- Rate Eligible Services Scope of Work Network Infrastructure and Structured Cabling
Request for Quote E- Rate Eligible Services Scope of Work Network Infrastructure and Structured Cabling Due Date: Allowable Contract Date from Posted 470 The Clarkdale- Jerome School District is requesting
Request for Purchase DESIGN AND INSTALLATION OF STRUCTURED COMMUNICATIONS CABLE SYSTEMS
VOFP Cabling RFP 1 Request for Purchase DESIGN AND INSTALLATION OF STRUCTURED COMMUNICATIONS CABLE SYSTEMS For The Village of Franklin Park 2014 VOFP Cabling RFP 2 TABLE OF CONTENTS I. PROJECT DESCRIPTION
1993 Specifications CSJ , etc. SPECIAL SPECIFICATION ITEM CCTV Central Equipment
1993 Specifications CSJ 0922-33-042, etc. SPECIAL SPECIFICATION ITEM 8549 CCTV Central Equipment 1. Description. This Item shall govern for the furnishing and installation of closed circuit television
PHYSICAL FACILITIES Consultant s Handbook Specifications Division 27 Communication 0553 Identification for Communications Systems
1 General 1.1 Scope of work 1.1.1 The Contractor is held responsible to be familiar with the provisions contained herein and with other Sections of this Specification as applicable to the completion of
SECTION COMMUNICATIONS HORIZONTAL CABLING
(NOTE TO DESIGNER: These Specifications are basic minimum criteria to be met in preparing the final specifications for this section, which is the responsibility of the Designer.) PART 1 - GENERAL 1.1 SECTION
Product information 19" 1U HD Patch Panel 48xRJ45/s, Cat. 6A, gray, fully populated
Product information 19" 1U HD Patch Panel 48xRJ45/s, Cat. 6A, gray, fully populated R512417 966740615 1 Pcs. 090.6102 Metal patch panel with integrated cable tie shelf. 19" 1U HD patch panel 4 12-port/s
RACKS, ENCLOSURES AND CABLE MANAGEMENT
and RS3 RACK SYSTEM (pages 6.2 6.3) RS RACK SYSTEM (pages 6.4 6.5) EXTENDED DEPTH RS RACK SYSTEM (page 6.5) Vertical Side Rail Capacity Cable Manager Covers Accessories 117mm x 152mm (4.6 in. x 6.0 in.)
PURCHASING DEPARTMENT. Project # Addendum # # of pages Original Issue Date Request Doc # April 15, see text below
PURCHASING DEPARTMENT The bid listed below has had addenda issued. Documents are available over the Internet at http://www.norwalkct.org Adobe Acrobat reader is required to view this document. If you do
SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment
2004 Specifications CSJ 3256-02-079 & 3256-03-082 SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment 1. Description. Furnish and install Fiber Optic Video Data Transmission Equipment
Michigan State University Construction Standards EXTERIOR FIBER OPTIC CABLE SYSTEM PAGE
PAGE 271800-1 SECTION 271800 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment
1993 Specifications CSJ 0500-01-117 SPECIAL SPECIFICATION 1291 Fiber Optic Video Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic Video
3M Telecommunications. Solutions for Networks. 3M MPO solutions. High Density Networks. Technology built for business
3M Telecommunications Solutions for Networks 3M MPO solutions High Density Networks Technology built for business 2 3M Telecommunications Solutions for Networks 3M Telecommunications Solutions for Networks
SECTION MASTER TELEVISION ANTENNA SYSTEM (MTAS)
PART 1 GENERAL 1.1 SCOPE OF WORK SECTION 27 41 00 MASTER TELEVISION ANTENNA SYSTEM (MTAS) A. The extent of the master television antenna system (MTAS) work is hereby defined to include (but not by way
EXHIBIT BASIS OF DESIGN REPORT. Space Type: Space Usage: Approx. 2,000 BTU each. Off-center of room to match side screen.
AV Basis of Design Illinois Project #: Space : Date of Creation: Latest Revision: General Information Space : Space Usage: Other Notes: Project Name: Room s Presentation Room Room Numbers 1 System AV Presentation
CHABOT- LAS POSITAS COMMUNITY COLLEGE DISTRICT
CHABOT- LAS POSITAS COMMUNITY COLLEGE DISTRICT Purchasing and Warehouse Services Department October 1, 2007 Addendum No. 1 INVITATION FOR BID No. 08-09 Temporary Faculty Offices, Chabot College All Prospective
INFRASTONE BLACKSTONE 10G 6A(U/UTP) Europe, Middle East and Africa regions UNLIMITED USAGE 1
INFRASTONE BLACKSTONE 10G 6A(U/UTP) Europe, Middle East and Africa regions UNLIMITED USAGE 1 WWW.INFRASTONE.COM Contents BLACKSTONE CAT6A U/UTP channel performance Introduction BLACKSTONE CAT6A U/UTP channel
Abhyudaya Marketing Solutions
9553315000 Abhyudaya Marketing Solutions http://cabletraygratings.com/ Welcome to Abhyudaya Marketing Solutions We came into existence in the market, in the year 2014 with a name of Abhyudaya Marketing
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 39 2013 Test Method for Static Minimum Bending Radius for Coaxial Trunk, Feeder, and Distribution Cables NOTICE
Delaware County Community College Project # Marple Campus Renovation - Phase % Construction Documents November 23, 2011
SECTION 271323 - COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING PART 1 - GENERAL 1.1 DESCRIPTION A. This section provides the specifications for the work related to the optical fiber system in the project.
1.0 DESCRIPTION. This specification covers roll-up signs to be used in temporary traffic control zones.
(Page 1 of 10) ROLL-UP SIGNS (MGS-04-01O) 1.0 DESCRIPTION. This specification covers roll-up signs to be used in temporary traffic control zones. 2.0 MATERIAL. 2.1 SIGNS AND OVERLAYS. 2.1.1 SUBSTRATES.
EXHIBIT BASIS OF DESIGN REPORT. Space Type: Space Usage: Off-center of room to match side screen. Location
AV Basis of Design Illinois Project #: Space Location: Date of Creation: Latest Revision: General Information Space Type: Space Usage: Other Notes: Project Name: Room Types Presentation Room Room Numbers
APPENDIX A Verify All Part Numbers (Partial List of Approved Products)
SECTION 16651 APPENDIX A Verify All Part Numbers (Partial List of Approved Products) SYSTIMAX SCS: OVER-VOLTAGE PROTECTION 1. Over-voltage Protection Device, 100-Pair with Enclosure, Product 489ACAI-100,
B. Cross-Connect: A facility enabling the termination of cable elements and their interconnection or cross-connection.
SECTION 271300 - COMMUNICATIONS BACKBONE CABLING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
CONSTRUCTION SPECIFICATION FOR TRAFFIC SIGNAL EQUIPMENT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 620 APRIL 2017 CONSTRUCTION SPECIFICATION FOR TRAFFIC SIGNAL EQUIPMENT TABLE OF CONTENTS 620.01 SCOPE 620.02 REFERENCES 620.03 DEFINITIONS 620.04
4-DIGIT & 6-DIGIT "U" SERIES TIME CODE READERS OPERATION AND MAINTENANCE MANUAL
142 SIERRA ST., EL SEGUNDO, CA 90245 USA (310)322-2136 FAX (310)322-8127 www.ese-web.com 4-DIGIT & 6-DIGIT "U" SERIES TIME CODE READERS OPERATION AND MAINTENANCE MANUAL The "U" Series of 4-digit and 6-digit
City of Winter Springs, FL
City of Winter Springs, FL Request for Quote RFQ/006/17/LS Commission Chambers Audio Visual System Upgrades The City of Winter Springs will be upgrading its Commission Chambers (Chambers) audio visual
SMART CLASSix 48 UTP Patch Panels (with patching switches) -
Features Front-mounted Patching Switches connect ports internally, dramatically reducing the need for patch cords Compatible to Unshielded Twisted Pairs (UTP) cabling systems High performance panel that
ACADEMIC SUCCESS CENTER THE COLLEGE AT BROCKPORT STATE UNIVERSITY OF NEW YORK PROJECT NO
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENTAL SPECIFICATION 804 FIBER OPTIC CABLE AND COMPONENTS. January 20, 2017
804.01 Description 804.02 General 804.03 Materials 804.04 Warranties 804.05 Fiber Optic Cable 804.06 Fan-Out Kit 804.07 Drop Cable 804.08 Fiber Optic Patch Cord 804.09 Fiber Termination Panel 804.10 Fusion
OCC Installation Conduit Guidelines Excerpt from Optical Cable Corporation s INSTALLATION GUIDE
Installation Conduit Guidelines Excerpt from Optical Cable Corporation s INSTALLATION GUIDE Conduit Installation A conduit cable installation involves placement of one or more optical cables inside a preinstalled
Drop Passives: Splitters, Couplers and Power Inserters
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 153 2016 Drop Passives: Splitters, Couplers and Power Inserters NOTICE The Society of Cable Telecommunications
SECTION 7 -- CROSS-CONNECT SYSTEMS
DETAIL ENGINEERING REQUIREMENTS AT&T March, 2016 Section 7, ATT-TP-76400 Revised NA SECTION 7 -- CROSS-CONNECT SYSTEMS CONTENTS PAGE 1. GENERAL... 7-2 1.1. Introduction... 7-2 1.2. Cable Holes... 7-2 1.3.
Best Friends General Trading FZE
Welcome to Best Friends General Trading FZE Tel. +97 1 50-5426 202, Fax. +971 6 7407428, info@bestfgt.com, besttrd@eim.ae Infrastructure Product Guide Best fgt is UAE based company, operational for last
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR FIBER OPTICS. ITS:CLC 1 of 11 APPR:MDW:JVG: FHWA:APPR:
MICHIGAN DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION FOR FIBER OPTICS ITS:CLC 1 of 11 APPR:MDW:JVG:06-08-18 FHWA:APPR:06-18-18 a. Description. This work consists of furnishing, installing, splicing,
Connectivity accessories by Nestor Cables
Connectivity accessories by Nestor Cables NesCon product family includes essential installation and connection accessories for fibre optic networks, from ODFs to joint closures and terminations. www.nestorcables.com
CITY OF SAN MATEO CITY COUNCIL CHAMBERS & CONFERENCE ROOMS SECTION COMMON WORK RESULTS FOR AUDIOVISUAL SYSTEMS
SECTION 27 41 00 COMMON WORK RESULTS FOR AUDIOVISUAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes, but is not necessarily limited to: 1. Common standards and procedures for the Audiovisual
HIGH COURT OF BOMBAY AT GOA
HIGH COURT OF BOMBAY AT GOA Calling Quotations for Supply and Installation of Wireless Synchronized Digital Clocks Quotations are invited from the Manufacturers/Suppliers of Wireless Synchronized Digital
SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment
1993 Specifications CSJ 0027-12-086, etc. SPECIAL SPECIFICATION 1987 Single Mode Fiber Optic Video Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation of color
AMERICAN NATIONAL STANDARD
Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 129 2017 Drop Passives: Bonding Blocks (Without Surge Protection) NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards