(7) Changing the Ratio (8) Initialization Additional features (1) Adjusting the monitor position (2) Light on/off

Transcription

1

2 Table of Contents 1. What is the SenseView DESKTOP? Safety Precaution Package Overview How to install... 5 (1) Connect the power cable... 5 (2) Using DVI-D cable... 6 (3) Connecting to a computer Easy guide... 9 (1) Power on... 9 (2) The camera location... 9 (3) Using the Reading table... 9 (4) Changing the magnification rate (5) Changing the color mode (6) Changing the contrast (7) Using the marker (8) Practicing the SenseView DESKTOP Using the Front controller (1) Magnification rate (2) Changing the color mode (3) Changing the contrast (4) Using the marker (5) Using the Focus lock (6) Using a PC with the SenseView DESKTOP

3 (7) Changing the Ratio (8) Initialization Additional features (1) Adjusting the monitor position (2) Light on/off Troubleshooting Technical Specifications Warranty... 22

4 1. What is the SenseView DESKTOP? User Manual - SenseView DESKTOP The SenseView DESKTOP is an electronic magnifier for low vision and the elderly to read books, manuals, grocery information with the large screen monitor. Not as same as general optical magnifier, it magnifies a large range so convenient to read lots of text at once. You can also change magnification level for your convenience depending on the size of text. To get a clear and vivid image you can select Full color mode for cooking books or pictures and High contrast mode for study or reading books. The SenseView DESKTOP is useful to read small text and see the pictures in your daily activities such as reading a book, newspapers and the latest magazine, writing essay, reading manuals of electronic devices, ensuring medicine is taken correctly with instructions, verifying your statements as well as your bills and keeping up with friends by viewing their latest photos. 1

5 2. Safety Precaution To protect both yourself and the equipment, observe the following precautions. Do not use damaged power plug or unsuitable outlet to prevent electronic shock or fire. Do not touch power plug with wet hands to prevent electronic shock. Do not disassemble, remodeling or repair by unauthorized person. It may damage the unit and void the product warranty. Only the power adapter supplied by HIMS should be used as other power adapter may damage the unit. Install the unit in flat and stable place. Put on a table enough to bear the unit s weight. Do not pull down monitor too aggressively. It can cause the monitor to fall down, and it can bear a serious damage. Do not press down the Reading table firmly when moved toward you. The unit may fall down. Do not disconnect the Controller cable when the power is on. It may damage to the unit. Do not use this unit in moisture environment to prevent any damage. 2

6 3. Package The SenseView DESKTOP consists of the following items. SenseView DESKTOP User manual VGA cable x1 DVI-D cable x2 Main frame adapter Monitor adapter 3

7 4. Overview (1) (8) (2) (3) (4) (7) (6) (5) (1) LCD Monitor (2) Front Controller (3) Cable Cover (4) Table Lock (5) Reading table (6) Camera (7) Camera Module (8) Monitor arm 4

8 5. How to install (1) Connect the power cable After purchasing the unit, you need to connect the power cable of monitor and the power cable of the body to start using SenseView DESKTOP. 1 Connect the power cable of the monitor to monitor connection cable which is set to SenseView DESKTOP as shown below. 2 Pull out the Cable cover while pressing the small lever on the top. 5

9 3 Connect the Power cable to the body through the lower hole on the Cable cover and replace the Cable cover. 4 5 Plug the Power cable and Monitor cable into outlets. Turn on the power (2) Using DVI-D cable To use DVI-D cable, disconnect VGA cable. 1 Move up the monitor and unscrew the screw at the cable clamp. 2 Disconnect VGA cable and connect DVI-D cable. (Note) Do not strain the cable. It may obstruct movement of the monitor. 6

10 3 Tie up the cables with the cable clamp and screw into the Monitor arm. 4 Pull the Cable cover out and connect the DVI-D cable to the body through the hole on the Cable cover. It should be connected upper DVI-D port. 5 6 Put the Cable cover back. Plug the power cables into outlets. (Note) Do not connect a LAN cable to the Front controller port on the body. The SenseView DESKTOP may be damaged. (Note) The monitor and computer should be connected with either VGA or DVI-D cable. 7

11 (3) Connecting to a computer User Manual - SenseView DESKTOP You can use the SenseView DESKTOP and computer in one monitor. To use this feature, connect a computer to the SenseView DESKTOP in advance. Turn off the SenseView DESKTOP. Pull the Cable cover out and check what type of cable is connected between the SenseView DESKTOP and monitor. The monitor and computer should be connected with either VGA or DVI-D cable. Please use an adequate cable for each port. (Note) The monitor and computer should be powered by their own supplied cable. (Note) The SenseView DESKTOP and computer should be connected with either VGA or DVI-D cable. Please use an adequate cable for each port 8

12 6. Easy guide (1) Power on The Power button is the first key from the right in the front controller. To start using the unit, press the Power button. While it's on, the LED located at the top of the right side in the front controller will be turned on with green color. Pressing once again the power will be turned off. (2) The camera location When the Reading table is in initial position, the camera is right above the SenseView logo on the Reading table. The camera is fixed, so use the Reading table to read the material that you want to magnify. (3) Using the Reading table When you want to magnify the object that does not display on the screen at once, you can use the SenseView DESKTOP by moving the Reading table. 9

13 The Table lock, a blue lever at the front of the Reading table, allows you to fix the Reading table. To lock the Reading table, move the lever all the way to the right. To unlock the Reading table, move the lever to the left. (4) Changing the magnification rate You can change the magnification rate by using the Zoom key in the center of the front controller. Find the best rate for your convenience, depending on the text or picture size. Rotate the Zoom key to the right to increase the magnification rate and rotate to the left to decrease. Tip) As the magnification rate is higher, the range you can see at once is smaller. In order to reduce the tiredness of your eyes and read for a long time, use as the lowest magnification rate as you can. (5) Changing the color mode You can change the color mode by using the Mode key, the second key from the left. The image can be viewed in 7 different color modes and you can edit its color combination as well. Tip) By changing the color on screen, it makes help to read for the people who have color blindness, macular degeneration, corneal opacity, cataract, or other low vision eye condition. Generally, people prefer to use white on black or yellow on blue. Choose the color mode for your convenience. 10

14 (6) Changing the contrast User Manual - SenseView DESKTOP To adjust contrast to see the image clearly irrespective of the material being viewed. The Contrast key is the first key from the left. Tip) Rotate the Contrast key to the left for the letters with weak contrast and rotate to the right for strong contrast. (7) Using the marker The markers help you to read text on the screen. It improves your reading ability. When you press the Marker key, second key from the right, a marker will show up. To select another marker, press the Marker key again. You can adjust the marker position by rotating the Marker key to the right or left. (8) Practicing the SenseView DESKTOP In order to prevent tiredness of your eyes, you need to take a break. You need to rest your eyes every 5, 10 or 15 minutes. Find out the best using time for you. After 30 minutes reading, please take a break to relieve your eyes. 11

15 7. Using the Front controller You can use the Front controller to set the options. (1) Magnification rate The SenseView DESKTOP can magnify from 3X to 74X. 1 Changing the magnification rate The Zoom key is located in the center of the Front controller. Rotate to the right to increase the magnification rate. Rotate to the left to decrease the magnification rate. 2 Using digital zoom The SenseView DESKTOP provides optical magnification up to 27.5X. To magnify more than 27.5X, you have to use digital zoom. It allows you to magnify up to 74X. Press the Marker key, second key from the right, for more than 5 seconds. When DIGITAL ZOOM ON shows up, zoom mode will be changed to digital. When you press the Marker key once again for more than 5 seconds, DIGITAL ZOOM OFF shows up and returns to the optical zoom mode. 12

16 (2) Changing the color mode User Manual - SenseView DESKTOP You can change the color on the screen. When you read text, you can change the color of the text and background for the best matches your needs. 1 Changing the color mode 7 color modes are selectable. The Mode key is the second key from the left. Rotate to the right to increase the value. Rotate to the left to decrease the value. 2 Changing the color combination From mode 1 to 4 are unchangeable and from mode 5 to 7 are available to change the combination of the text and background. Move to among mode 5 to 7 you want to change the combination by using the Mode key. When you press the Mode key for more than 3 seconds, MODE SETUP will show up and then GENERAL MODE will be displayed on the screen. Move to the color combination you prefer by rotating the Mode key. (Refer to the Color table) Press the Mode key. It will ask you SAVE? YES. Press the Mode key once again. CONFIRM will show up and it is saved If you don t want to save, rotate the Mode key and when SAVE? NO shows up, press the Mode key. EXIT will show up and it is canceled. 13

17 3 Color table No. Text Background 1 Full color 2 Gray 3 Black White 4 White Black 5 Blue White 6 White Blue 7 Blue Yellow 8 Yellow Blue 9 Green White 10 White Green 11 Red White 12 White Red 13 Magenta White 14 White Magenta 15 Cyan White 16 White Magenta 17 Yellow White 18 White Yellow 19 Black Red 20 Red Black 21 Black Green 22 Green Black 23 Black Blue 24 Blue Black 25 Black Magenta 26 Magenta Black 27 Black Cyan 28 Cyan Black 29 Black Yellow 30 Yellow Black 31 Cyan Red 32 Red Cyan 33 Green Magenta 34 Magenta Green 14

18 (3) Changing the contrast User Manual - SenseView DESKTOP Adjust contrast to see the image clearly irrespective of the material being viewed. The Contrast key is the first key from the left. 35 levels are available and the default value is level 18. Rotate to the left to decrease the value. Rotate to the right to increase the value. Increase the value for the letters with weak contrast and decrease for the letters with strong contrast. (4) Using the marker The markers help you to read text on the screen. It improves your reading ability. 2 types of markers are available. Line markers show a line on the screen and Window markers blind the unwanted part. The Marker key is the second key from the right. There are 4 kinds of markers: Horizontal Line Marker, Vertical Line Marker, Horizontal Window Marker and Vertical Window Marker. When you press the Marker key, 4 marker modes are selectable. In Line Marker mode, when you rotate the Marker key, the Line maker moves up and down. In Window Marker mode, when you rotate the Marker key, the blinded part gets extended and narrow. To cancel this option, press the Marker key in the Vertical Window Marker. In the marker modes, no message shows up. In the marker modes, you can t change the color combination. (5) Using the Focus lock The SenseView DESKTOP provides Automatic focus, so to prevent to focus your hand or the pen when you write, use the Focus lock. Press the Contrast key for more than 3 seconds, F/LOCK will show up and disappear. To cancel the Focus lock, press the Contrast key once again for more than 3 seconds, F/AUTO will show up and disappear. 15

19 (6) Using a PC with the SenseView DESKTOP. User Manual - SenseView DESKTOP You can use the SenseView DESKTOP and a computer in one monitor. (To connect a computer, refer to Connecting a computer on page 7) When you press the Contrast key, it changes to PC ONLY mode and the PC screen will be displayed. In PC mode, when you press the Contrast key again, it changes to CAM ONLY mode and the SenseView screen will be displayed. To use this option, connect a computer to the SenseView DESKTOP in advance. When you press the Contrast key while the computer is off, NO SIGNAL will show up. When NO SIGNAL shows up while the computer is on, reboot the computer. You can use this option when the SenseView DESKTOP is off. (The power adapter need to be connected.) Check list when you connect DVI-D cable. 1 When you connect DVI-D cable, turn on the computer and wait until the screen shows up. Afterward, turn on the SenseView DESKTOP. 2 You need to reboot the computer after disconnecting DVI-D cable. (You don t need to reboot while using VGA cable.). (7) Changing the Ratio It allows you to alternate Normal mode or Wide mode. The default value is Normal mode. To change the mode, follow the steps below. In order to switch mode, turn on the power while pressing the Marker key. It turns off with a beep sound. Wait until it turns on again and NORMAL or WIDE shows up, release the Marker key. 16

20 (8) Initialization User Manual - SenseView DESKTOP You can initialize the SenseView DESKTOP due to the user s faulty or malfunction. Follow the steps below. Turn on the power while pressing the Marker key and Mode key simultaneously. Release the Marker key and Mode key when Initialization shows up with a beep sound. The SenseView DESKTOP will reboot and return to factory defaults. To keep the factory defaults, reboot the SenseView once again. 17

21 8. Additional features (1) Adjusting the monitor position You can adjust the monitor for your convenience. Hold both sides of the monitor and move up or down and swivel left or right. Pulling the monitor down Pulling the monitor up Turning the monitor to the left Turning the monitor to the right 18

22 Tilting the monitor forward Tilting the monitor backward (Note) Pulling monitor too aggressively can cause the monitor to fall down, and it can bear a serious damage. When adjusting the position, please be careful, and try to adjust it slowly. (2) Light on/off When you turn on the SenseView DESKTOP, the light is on. Turn off the light, when you view the reflexible objects or the light is too bright. The Light switch is under the Camera module. 19

23 9. Troubleshooting (1) The screen is blank. Check if the power of monitor is on. It may be turned off the monitor accidently. Check the monitor cable. When the cable is not connected correctly, it doesn t display accurately. (2) NO SIGNAL shows up on the screen while switching to PC screen. Check the cables. Connect the same type of cable to the PC and monitor.(vga-vga, DVI-D-DVI-D) Reboot the computer when the SenseView DESKTOP is on. And try again. (3) The image on the screen is not clear. When in Focus lock mode, it doesn t focus automatically. Switch to the Automatic focus by pressing the Contrast key for more than 3 seconds. When you reboot the SenseView DESKTOP, it returns to the Automatic focus. (4) Cannot change color combination. Check the current color mode. Only in mode 5 to 7, you can select the different color mode. Check if the Mark mode is operated. You cannot change color combination while using the maker function. (5) It doesn t display in full-screen. Press the AUTO button at the monitor to adjust display for optimal viewing. (6) Text message doesn t show up. In marker mode, no text message shows up. 20

24 10. Technical Specifications Magnification Power Size Basic Color Mode Selection of Color Mode Weight 3X~74X (19" monitor) 12V / 3A 340mm(w) x 467mm(d) x 361mm(h) (except the monitor and Displaying Module) 1. True Color 2. Gray 3. Black text on White background 4. White text on Black background 5. Blue text on White background (changeable) 6. White text on Blue background (changeable) 7. Yellow text on Blue background (changeable) - True Color, 16 kinds of general color mode (Black/White, Blue/White, Yellow/Blue, Green/White, Red/White, Magenta/White, Cyan /White, Yellow/White, Black/Blue, Black/Green, Black/Red, Black/Magenta, Black/Cyan, Black/Yellow, Cyan/Red, Magenta/Green) - Support Negative Mode for each color mode except True Color 17 Kg Output Resolution 1280 X 1024 In/Output Input Output - VGA, DVI-D - VGA, DVI-D (NOTE) This user guide will be differed from actual operation due to improved function of products and it is subject to change and modified without prior notice. 21

25 11. Warranty (1) Warranty term is 2 years from your purchasing. (2) Warranty does not cover the problem due to the user s fault. Note: The warranty term will be different from each country. 22

26 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user s authority to operate the equipment. 23