Ordering Guide of the Generic Closure Organizer (FIST-GCO2)

Transcription

1 Page 1 of 26 Ordering Guide of the Generic Closure Organizer (FIST-GCO2) This document provides assistance with the selection of FIST Generic Closure Organizers (FIST-GCO2) for use in FIST applications. It includes the following sections: 1 Product description 2 2 Ordering information How to order this product Application kits Closure name string Accessories Cable seal kits for the oval port Cable seal kits for the round ports (6-round-port-base) Cable seal kits for the round port (16-round-port-base) Cable termination accessories Mounting kits Organizer trays Storage baskets Installation kit components Installation tools 10 3 Product guide Closure description Closure dimensions Closure capacity Accessories Cable seal kits for the oval port Cable seal kits for the round port (6-round-port-base) Cable seal kits for the round port (16-round-port-base) Cable termination accessories Mounting kits Organizer modules Storage baskets Installation kit components Tools 22

2 Page 2 of 26 1 Product description The generic closure FIST-GCO2 is the environmentally sealed enclosure for the fiber management system that provides the functions of splicing and passive component integration in the external network. The product can be tailored to almost any required configuration by adding splicing and/or passive device sub-assemblies. The FIST-GCO2 has provision for all cable termination and sealing requirements. UMS profile uncut loose buffer tube storage area modular wraparound groove plates Organizer trays FAS block (Fiber Arrangement System) Tube holder assembly base The closure is a single-ended design made of a thermoplastic material. The base and dome are sealed with a clamp and an O-ring system. One oval entry port for looped (uncut) cable and six or sixteen round ports for single cable entry/exit are provided in the base. The cable seals are manufactured from heat-shrinkable material. The UMS (Universal Mounting System) profiles provide the foundation for mounting combinations of SOSA2 (Splicing Only Sub-Assembly) and/or SASA2 (Splitter Array Sub- Assembly) modules, which consist of a modular groove plate and trays. Uncut loose buffer tube storage space is available between the two UMS profiles; for central core applications, storage baskets are available.

3 Page 3 of 26 2 Ordering information 2.1 How to order this product Order one of the application kits Some application kits have been identified for an easy product selection and ordering. These kits contain all necessary accessories for a certain application and fiber count. The information can be found in paragraph 2.2. Order the closure and its accessories separately For maximum flexibility, the closure and the accessories can be ordered as separate items. The information can be found in paragraphs 2.3 and 2.4. This is recommended when: other splice / fiber capacities are required the required configuration is not covered by the application kits (e.g. ANT splice holders,...) ribbon fiber is used when the cable configuration is not loose tube or central core a mix of cable configurations (e.g. single fiber and Ribbon8) has to be spliced in the same closure other quantities and types of cable seal kits are necessary an extension of an application kit or installed closure is needed

4 Page 4 of Application kits Network functions Application kits for single fiber have been identified for the following network functions: Cable Fiber SE Cable Track joint Two cable lengths are spliced onto each other. The joint is not a flexibility point in the network; typically single element trays are used. This type of joint is used when at the end of the cable spool or when an outdoor cable has to be spliced to an indoor cable (cable chamber joint). Splice SC 'dead' end Spur joint type 1 Branch a number of fibers onto another cable; the main cable continues without being cut and spliced. The fibers of the main cable are stored as tubes. Single ccircuit trays are used since this is a flexibility point in the network. SC SE Spur joint type 2 Branch a number of fibers onto another cable; the main cable continues and is spliced as well. The main cable continues via single element trays. Spur joint type 3 Branch off a secondary ring from a main ring; the main cable continues without being cut and spliced. The fibers of the main cable are stored as tubes. SC SC SE Spur joint type 4 Branch off a secondary ring from a main ring; the main cable continues via single element trays. SC SC

5 Page 5 of Track joint SE Order code: FIST-GCO2-TJ-SFKITXX Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F Single fiber loose tube 8 fibers per tube/tray Single fiber loose tube 12 fibers per tube/tray Central core cable 12 fibers per tray Kit content (detailed in Addendum 1) FIST-GCO2-BC6-NN (See details under paragraph 2.3) SOSA2 s with single element trays for fiber counts indicated in the table 2 round port seal kits Heat shrinkable splice protectors (SMOUV with a length of 45 mm) Spur joint type 1 Order code : FIST-GCO2-SJ1-SFKITXX SC 'dead' end Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT04 contains 24 single circuit trays (for 48 fibers, which is 50% of the indicated fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F Single fiber loose tube 2 fibers per tray Central core cable 2 fibers per tray (BD6) Kit content (detailed in Addendum 1) Closure type as indicated in the table, without ground feed-through and flash test valve SOSA2 s with Single circuit trays for 50% of the fiber count indicated in the table. 1 oval port seal kit 1 round port seal kit Heat-shrinkable splice protectors (SMOUV with a length of 45 mm) Storage basket for the central core cable kits (kits 8-11) Note: the tube diameter of the loop is limited to 2.8 mm for kits 05, 06 and 07.

6 Page 6 of Spur joint type 2 SE Order code: FIST-GCO2-SJ2-SFKITXX SC Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT09 contains 24 single circuit trays (for 48 fibers, which is 50% of the indicated fiber count) and 4 single element trays (for 48 fibers, which is 50% of the indicated fiber count) Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F Single fiber loose tube 8 fibers per tray/tube Single fiber loose tube 12 fibers per tray/tube Central core cable 12 fibers per tray (BD6) 12 (BE6) Kit content (detailed in Addendum 1) Closure type as indicated in the table, without ground feed-through and flash test valve SOSA2 s with SC trays for 50% of the fiber count indicated in the table. SOSA2 s with SE trays for 50% of the fiber count indicated in the table. 1 oval port seal kit 1 round port seal kit Heat-shrinkable splice protectors (SMOUV with a length of 45 mm) Spur joint type 3 Order code : FIST-GCO2-SJ3-SFKITXX SC SC Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT04 contains 2x 24 single circuit trays (for 2x 48 fibers, which is 50% of the indicated fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F Single fiber loose tube 2 fibers per tray Central core cable 2 fibers per tray (BD6) 06 (BE6) Kit content (detailed in Addendum 1) Closure type as indicated in the table, without ground feed-through and flash test valve SOSA2 s with SC trays for fiber count indicated in the table. 1 oval port seal kit 2 round port seal kits Heat-shrinkable splice protectors (SMOUV with a length of 45 mm) Basket for central core cable kits (kits 8-11)

7 Page 7 of Spur joint type 4 SE Order code: FIST-GCO2-SJ4-SFKITXX SC SC Note Kits are defined assuming that 50% of the fibers are spliced to the branch. Example KIT09 contains 2x 24 single circuit trays (for 2x 48 fibers = 50% of the indicated fiber count) and 4 single element trays (for 48 fibers = 50% of the indicated fiber count). Cable fiber count Fiber organization 24F 48F 72F 96F 144F 192F 288F Single fiber loose tube 8 fibers per tray/tube (BD6) 05 (BE6) Single fiber loose tube 12 fibers per tray/tube (BD6) 10 (BE6) 11 (BE6) Central core cable 12 fibers per tray (BD6) Kit content (detailed in Addendum 1) Closure type as indicated in the table, without ground feed-through and flash test valve SOSA2 s with SC trays for the fiber count indicated in the table. SOSA2 s with SE trays for 50% of the fiber count indicated in the table. 1 oval port seal kit 2 round port seal kits Heat-shrinkable splice protectors (SMOUV with a length of 45 mm) 2.3 Closure name string Refer to section 3.0 for full product descriptions. FIST-GCO2-XX X-X X Closure type Flash test point BC BD BE 488 mm long with two 28 units UMS 566 mm long with two 42 units UMS 700 mm long with two 58 units UMS V N Pre-mounted flash test point in dome No flash test valve Number of round ports 6 6 ports with max cable 30 mm 16 8 ports with max. cable 13.5 mm and 8 ports with max. cable 20 mm Ground feed-through G Pre-mounted ground feed-through N No ground feed-through Standard kit content Base UMS profiles; height depending on closure size Dome Clamp O-ring 2x FAS block (including 2 tube holders each, cap and wedge) - pre-installed 2x Velcro 2x traylids (including fiber guiding pin) Silica gel Allen key Installation Instructions

8 Page 8 of Accessories Cable seal kits for oval port Organizer trays + wraparound groove plates Uncut fiber storage basket Cable seal kits for round port Cable seal kits for the oval port Name Qty/Pk Description FIST-GCO2-OSK-LTS 1 pc Oval port seal kit for single fiber loose tube cable FIST-GCO2-OSK-LTR 1 pc Oval port seal kit for loose tube ribbon cable FIST-GCO2-OSK-CC 1 pc Oval port seal kit for central core cable (both single fiber and ribbon) FOSC-CSEAL-2NW-S pc Wraparound cable seal sleeve for use on any oval port (repair or re-entry) Cable seal kits for the round ports (6-round-port-base) Name Qty/Pk Description FIST-GCO2-RSK-LTS 1 pc Round port seal kit for single fiber loose tube cable FIST-GCO2-RSK-LTR 1 pc Round port seal kit for loose tube ribbon cable FIST-GCO2-RSK-CC 1 pc Round port seal kit for central core cable (both single fiber and ribbon) FOSC-CSEAL-1NW-S pc Wraparound cable seal sleeve for use on any round port (repair or re-entry). FIST-GCO2-MULTI2/9 1 pc Multi drop cable kit for 1 cable (max. 14 mm) and 2 tubes (max. cable Ø 9.5 mm) (only for single fiber loose tube) FIST-GCO2-MULTI2/11 1 pc Multi drop cable kit for 1 cable (max. 14 mm) and 2 tubes (max. cable Ø 11.5 mm) (only for single fiber loose tube) FIST-GCO2-MULTI2/12 1 pc Multi drop cable kit for 1 cable (max. 12 mm) and 2 tubes (max. cable Ø 12 mm) (only for single fiber loose tube) FIST-GCO2-MULTI3/9 1 pc Multi drop cable kit with 3 tubes (max. cable Ø 9.5 mm) (only for single fiber loose tube) FIST-GCO2-MULTI3/11 1 pc Multi drop cable kit with 3 tubes (max. cable Ø 11.5 mm) (only for single fiber - loose tube) FIST-GCO2-MULTI-SEAL 1 pc Cable seal to seal the cable onto the tube (only for single fiber - loose tube) FIST-GCO2-MULTI-UCT 1 pc Multi termination plate with 3 strength member fixations to be used with the MULTI3 kits (only for single fiber - loose tube) FIST-GCO2-MULTI2/12-INST 1 pc Tool to install the FIST-GCO2-MULTI2/12 kit

9 Page 9 of Cable seal kits for the round port (16-round-port-base) Name Qty/Pk Description FIST-GCO2-RSK-16-LTS 1 pc Round port seal kit for loose tube cable (single fiber or ribbon) FIST-GCO2-RSK-16-CC 1 pc Round port seal kit for central core cable (single fiber or ribbon) FOSC-CSEAL-1NW-S pc Wraparound cable seal sleeve for use on any round port (repair or re-entry) Cable termination accessories Name Qty/Pk Description FACC-UCT pc Strength member fixation kit FIST-CU-TERM8 1 pc 8 Cu pair termination disconnect module Mounting kits Name Qty/Pk Description FIST-MOUNTING-KIT 1 pc Pole/wall mounting kit (*) FIST-MOBRA4-FIX 1 pc Wall mounting kit for 6-round-port-base (fits on all sizes) FIST-MOBRA-16-FIX 1 pc Wall mounting kit for 16-round-port-base (fits on all sizes) (*) fits only on the FIST-GCO2-BC6-XX closure Organizer trays See the FIST-SOSA2 ordering guide Storage baskets Name Qty/Pk Description FIST-BASKET-A 1 pc Storage basket for uncut fibers of a loose tube ribbon or central core cable (size BC) FIST-BASKET-B 1 pc Storage basket for uncut fibers of a loose tube ribbon or central core cable (size BD and BE) Installation kit components Name Qty/Pk Description FISTV-E S m Cutting wire to open the GCO ports FISTV-E S x 100 g Silicagel for inside the closure, to be replaced after each re-entry

10 Page 10 of Installation tools Name Qty/Pk Description FISTV-LCIT 1 pc Looped tube insertion tool for oval outlet (loose tube cable) FACC-HEAT-GUN-220V 1 pc 1460W, hot air gun to shrink the cable seals FACC-HEAT-GUN-110V 1 pc 1460W, hot air gun to shrink the cable seals FACC-HEAT-GUN-TIP-01 1 pc Nozzle for heat gun with side outlet (recommended to install seals on 16-port-base) FACC-S-HOT-AIR-TORCH 1 pc Flameless gas torch that can be used instead of a heat gun FACC-AXIAL-STRIPPER-01 1 pc Loop tube stripper FACC-TUBE-STRIPPER-02 1 pc Tube stripper OPTI-STRIP FIST-WORK-STAND 1 pc Closure installation stand FIST-WORKSTAND-H 1 pc Hingeable closure installation stand (for 6-round-portbase) FIST-WORKSTAND-16-H 1 pc Closure installation stand (for 16-round-port-base)

11 Page 11 of 26 3 Product guide 3.1 Closure description Dome The dome is made from a polymer, ribbed for extra strength. GC2OG010.JPG Base The base provides the foundation for the UMS profiles. Six or sixteen round and one oval port for cable entry/exit are provided in the base. GCOCAT09.JPG 7N3K0142.JPG Dome to base seal This seal consists of a mechanical clamp and a rubber O-ring. GC2OG009.JPG

12 Page 12 of 26 UMS (Universal Mounting System) profiles On the 2 UMS profiles, the wraparound groove plates can be clicked. The capacity of the UMS profile is defined by the closure size. Groove plates are available for single fiber, R4/8 and R12 and in different sizes. See SOSA2 ordering guide for more details. GC2OG002.JPG FAS block The window between the two FAS blocks is used to route fibers from one side of the FAS block to the other. Tube holders mounted on each side of the FAS block hold the loose tubes or spiral tubes in position. GC2OG003.JPG FAS block cap A FAS cap protects mechanically the fibers on the FAS block. Provision has been made to store the tray wedge. GCO2OG29.JPG Tube holder On every side of the FAS block, tube holders are provided to keep tubes coming from the cables in place. Twelve cavities provide a neat organization of the tubes. The total capacity depends on the tube diameter (see paragraph 3.3.1). GC2OG004.JPG Retainers for tube holders The retainers have to be slid into the tube holders. They are delivered in a set of 12. Spare retainers can be stored on the tray lid. GCO2OG28.JPG

13 Page 13 of 26 Expressed fiber storage area The area between the UMS profiles is used to store uncut loose buffer tubes. The looped cable is fed through the oval port. For central core cable, storage baskets provide the necessary protection of the fibers. GC2OG005.JPG Loose tube drop cable strength member fixation point The central strength member of each individual cable can be attached at this point. GC2OG006.JPG Ground feed-through (optional) A sealed grounding feed-through bolt can be pre-mounted in the base to connect metallic components to an external ground. GCOCAT09.JPG Flash test valve (optional) This is pre-mounted in the dome if pressure access is required. GCOCAT10.JPG

14 Page 14 of Closure dimensions Key 1. Dome 2. Base sealing ring 3. Base 4.UMS profile L D C A C D B A B* B** Closure type Dimensions in mm BC BD BE L A B (B**/B*) 30 (20/13.5) 30 (20/13.5) 30 (20/13.5) C D D with clamp

15 Page 15 of Closure capacity General Closure type BC BD BE UMS profile data UMS profile length (units) (1) 2 x 28 2 x 42 2 x 58 FAS Block data Number of tube holders Cavities per tube holder Capacity per tube holder - FOPT-SF (1.8 mm) - tubes of 2.2 mm - tubes of 2.9 mm - tubes of 3.1 mm - tubes of 5.0 mm - Spiral tube of 6.8 mm - Spiral tube of 8.8 mm Maximum number of fibers through the window in between the 2 FAS plates (2) - Single fiber - R4 - R8 - R Cable looping capacity Single fiber loose tube 7 tubes (3.6 m) 10 tubes (3.8 m) 11 tubes (4 m) (3.1 mm ) Stored in basket - R4 (ribbons) - R8 (ribbons) - R12 (ribbons) 25 + (5.3m) 15 + (5.3m) 12 + (5.3m) 25 + (5.9m) 24 + (5.9m) 12 + (5.9m) 25 + (6.1m) 24 + (6.1m) 12 + (6.1m) Cable port capacity (3) one oval port for 2 cables Max. 2x25 mm Min. 2x12 mm Max. 2x25 mm Min. 2x12 mm Max. 2x25 mm Min. 2x12 mm 6 round port base: six round ports (1 cable each) Max. 30 mm (4) Min. 5 mm Max. 30 mm (4) Min. 5 mm Max. 30 mm (4) Min. 5 mm 16 round ports (1 cable per port) of which 8 ports: of which 8 ports: Max mm Min. 5 mm Max. 20 mm Min. 5 mm Max mm Min. 5 mm Max. 20 mm Min. 5 mm Max mm Min. 5 mm Max. 20 mm Min. 5 mm (1) (2) (3) (4) The number indicated is the space that can be occupied by trays. A Single circuit tray occupies 1 unit; a Single Element or R4/8 tray occupies 2 units; a R12 tray needs 3 units. One UMS profile length unit equals 6 mm. Fibers must be evenly spread (entering both from left and right). Both oval and round ports can accommodate multiple cables per port subject to cable types and dimensions. Limited to 25 mm when a cable fixation bracket is used (included in the FIST-GCO2-RSK- CC).

16 Page 16 of Splicing cable to cable - primary coated fibers Loose tube - central core cable Closure type BC BD BE Fibers Trays Fibers Trays Fibers Trays Single circuit splicing capacity 2 primary coated fibers - SC Single element splicing capacity 8 primary coated fibers - SE tray 12 primary coated fibers - SE tray Ribbon fiber splicing capacity R4 cable - 2xR4 per tray R8 cable - R8 tray R12 cable - R12 tray Note Capacities indicated above are applicable for heat-shrinkable, ANT and QPAK splice protectors. 3.4 Accessories The following accessories are ordered separately for field installation Cable seal kits for the oval port Oval port seal kit for single fiber loose tube FIST-GCO2-OSK-LTS Cable seal kit to seal two cables having a diameter range of mm through the oval outlet port (numbered 1-2) of the FIST-GCO2. Includes a plastic sleeve to store the uncut loose buffer tubes between the 2 UMS profiles. GCO2OG16.JPG Oval port seal kit for loose tube ribbon fiber FIST-GCO2-OSK-LTR Cable seal kit to seal two cables having a diameter range of mm through the oval outlet port (numbered 1-2) of the FIST-GCO2. GCO2OG20.JPG

17 Page 17 of 26 Oval port seal kit for central core cable FIST-GCO2-OSK-CC Cable seal kit to seal two cables having a diameter range of mm through the oval outlet port (numbered 1-2) of the FIST-GCO2. Includes a metal bracket to terminate the two central core cables. GCO2OG17.JPG Wraparound cable seal kit for oval ports FOSC-CSEAL-2NW-S6073 A wraparound sleeve for an oval port that can be used in case of re-entry/repair. SEA013.JPG Cable seal kits for the round port (6-round-port-base) Single cable kits can be used when only one cable has to be terminated per drop port. Depending on cable construction, the following types can be ordered: Round port seal kit for single fiber loose tube FIST-GCO2-RSK-LTS Cable seal kit to seal cables with a diameter range of 5-30 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a universal strength member termination kit. GCO2OG18.JPG Round port seal kit for loose tube ribbon FIST-GCO2-RSK-LTR Cable seal kit to seal cables with a diameter range of 5-30 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a universal strength member termination kit and spiral tubing. GCO2OG21.JPG

18 Page 18 of 26 Round port seal kit for central core FIST-GCO2-RSK-CC Cable seal kit to seal cables with a diameter range of 5-25 mm through the round ports (numbered 3-8) of the FIST-GCO2. Includes a metal cable fixation bracket and spiral tube to terminate the central core cable. GCO2OG19.JPG Wraparound cable seal kit for round ports FOSC-CSEAL-1NW-S6073 A wraparound sleeve for a round port that can be used in case of re-entry/repair. SEA012.JPG Multi drop cable kits allow to feed more than 1 cable through the round port in a flexible way. In case that one cable is installed day one of the installation and further flexibility is needed to bring in 2 extra cables later on, the MULTI2-kits can be used. In a first stage, the cable is sealed together with 2 tubes; at a later stage, additional cable can be fed through these tubes. When full flexibility is needed and no cables are installed on day one, the MULTI3-kits can be used. Note that these kits are only applicable for single fiber-loose tube cable. FIST-GCO2-MULTI2/9 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=14 mm; other cable (through tubes) can have a max. diameter of 9.5 mm. Includes a multi-termination plate with one strength member fixation. FIST-GCO2-MULTI2/11 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=14 mm; other cable (through tubes) can have a max. diameter of 11.5 mm. Includes a multi-termination plate with one strength member fixation. FIST-GCO2-MULTI2/12 - Multi drop cable kit Multi drop cable kit for 1 cable and 2 tubes. Multi termination plate with one strength termination is included. Max. cable diameter for the first cable=12 mm; other cable (through tubes) can have a max. diameter of 12 mm. Includes a multi-termination plate with one strength member fixation. FIST-GCO2-MULTI3/9 - Multi drop cable kit Multi drop cable kit with 3 tubes. Max. cable dia. = 9.5 mm. FIST-GCO2-MULTI3/11 - Multi drop cable kit Multi drop cable kit with 3 tubes. Max. cable dia. = 11.5 mm. GCO2OG22.JPG

19 Page 19 of 26 FIST-GCO2-MULTI-SEAL Cable seal kit to seal the cable onto the tube GCO2OG23.JPG Multi strength member fixation kit FIST-GCO-MULTI-UCT Multi termination plate with 3 strength member fixations to be used with the MULTI3 kits. GCO2OG25.JPG Multi drop cable kit install tool FIST-GCO2-MULTI2/12-INST Tool to install the FIST-GCO2-MULTI2/12 kit GCO2OG24.JPG For more information on multi-kits, please refer to addendum Cable seal kits for the round port (16-round-port-base) Round port seal kit for loose tube cable FIST-GCO2-RSK-16-LTS Cable seal kit to seal cables with a diameter range of 5-20 mm through the round ports (numbered 3-16) of the FIST-GCO2. It includes a universal strength member termination kit. Round port seal kit for central core cable FIST-GCO2-RSK-16-CC Cable seal kit to seal cables with a diameter range of 5-20 mm through the round ports (numbered 3-16) of the FIST-GCO2. It includes a dual strength member termination kit and spiral tubing. Wraparound cable seal kit for round ports FOSC-CSEAL-1NW-S6073 A wraparound sleeve for a round port that can be used in case of re-entry/repair. SEA012.JPG

20 Page 20 of Cable termination accessories Cable termination kit (strength member fixation kit) FACC-UCT-10 (10 pc per pack) Universal strength member termination kit for metallic/non-metallic strength members between 1.5 and 5 mm diameter. Kit includes 10 universal strength member terminations, 10 screws and 1 Allen key. FIK&C103.JPG 8 copper pairs termination disconnect module FIST-CU-TERM8 This module can easily be mounted in the closure to terminate or connect up to 8 copper pairs from a hybrid cable. GCO2OG32.JPG Mounting kits Pole/wall mounting kit FIST-MOUNTING-KIT Bracket for mounting the FIST-GCO2-BCX-2A-XXX closure on a pole or a wall. (It does not fit on other sizes) It is not possible to work on the closure while it is mounted on this bracket. FTOO041.JPG Wall mounting kit (6-round-port-base) FIST-MOBRA4-FIX Bracket for mounting all GCO closure sizes (with 6-round-port-base) on a wall. It is possible to work on the closure while it is mounted on this bracket. FCMFI01.JPG Wall mounting kit (16-round-port-base) FIST-MOBRA-16-FIX Bracket for mounting all GCO2 closure sizes (with 16-round-port-base) on a wall. It is possible to work on the closure while it is mounted on this bracket. FCMFI01B.JPG

21 Page 21 of 26 Manhole mounting kit FIST-TIEBAR-KIT-01 Stainless steel device that has to be mounted between 2 walls in order to fix the closure in, for instance, a manhole. Designed for holes between mm. DSC0001.JPG FIST-TIEBAR-KIT-02 Stainless steel device to be mounted between 2 walls in order to fix the closure in, for instance, a manhole. Designed for holes between mm Organizer modules See the SOSA2 organizer ordering guide Storage baskets FIST-BASKET-A Storage basket to store the uncut fibers of a loose tube ribbon or central core cable. Model designed for size BC. GC2OG026.JPG FIST-BASKET-B Storage basket to store the uncut fibers of a loose tube ribbon or central core cable. Model designed for size BD and BE. GC2OG027.JPG Notes: 1. To store uncut single fiber loose tubes, no extra items need to be ordered; a plastic sleeve is delivered with the oval port seal kit for loose tube to store the tubes between the UMS profiles. 2. Uncut fibers can also be stored on trays using their loop-back facility.

22 Page 22 of Installation kit components Cutting wire FISTV-E S5027 Cutting wire to open the FIST-GCO2 ports. I&CO32.JPG Silica gel Silica gel to dry the air in the closure, to be replaced after each re-entry. I&C034.JPG 3.5 Tools Looped cable insertion tool FISTV-LCIT A tool to help feed the uncut loose buffer tubes through the oval outlet port in a controlled manner. I&C030.JPG Heat gun FACC-HEAT-GUN-220V A 1460W, 220V heat gun to shrink the cable seals as recommended. FACC-HEAT-GUN-110V A 1460W, 110V heat gun to shrink the cable seals as recommended. TO26.JPG Nozzle with side outlet FACC-HEAT-GUN-TIP-01 It is recommended to use this nozzle with side outlet on the heat gun for the installation of the seals on the 16-port-base. 7N3K1809.JPG

23 Page 23 of 26 Flameless gas torch FACC-S-HOT-AIR-TORCH A flameless gas torch that can be used to shrink the cable seals if no 1500W power source is available. TO11.JPG Axial tube stripper FACC-AXIAL-STRIPPER-01 SIECOR tooling to split cut or uncut (midspan) buffer tubes, mm in diameter, or pigtail jacket to expose fibers without damaging them. Resulting buffer tube halves can be easily removed with scissors. FACC-AXIAL-STRIPPER-01-SP Spare knifes for SIECOR axial stripper 01 DSC00045.JPG FACC-AXIAL-STRIPPER-RC1 Raucut1 tooling to open cut or uncut (midspan) buffer tubes. Kit includes inserts for tubes 1.8 to 4.2 mm diameter. RAUCUT1.JPG Tube stripper FACC-TUBE-STRIPPER-02 Tube stripper OPTI-STRIP to cut the loose buffer tubes of the fiber cable in confined spaces. FACC-TUBE-STRIPPER-02-SP Spare knive for FACC-TUBE-STRIPPER-02 TO17.JPG Work stand (for 6-round-port-base only) FIST-WORK-STAND A tool to hold the closure and mounting bracket in a vertical position during installation. MOBRA040.JPG

24 Page 24 of 26 Hingeable work stand (for 6-round-port-base only) FIST-WORK-STAND-H A tool to hold the closure and mounting bracket in a vertical or horizontal position during installation. 7N3K0521.JPG Hingeable work stand (for 16-round-port-base only) FIST-WORK-STAND-16-H A tool to hold the closure and mounting bracket in a vertical or horizontal position during installation. (Clamp to fix the rod to a table is not shown.) 7N3K1409.JPG Addendum 1 - Application kit contents for FIST-GCO2 Track joint kits FIST-GCO2-TJ-SFKITxx Kit content FIST-GCO2-BC6-NN FIST-GCO2-BD6-NN FIST-GCO2-BE6-NN FIST-SOSA2-4SC-S FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV (pc) FIST-BASKET-A FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC FIST-GCO2-RSK-LTS Spur joint type 1 kits FIST-GCO2-SJ1-SFKITxx Kit content FIST-GCO2-BC6-NN FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN FIST-SOSA2-4SC-S FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV (pc) FIST-BASKET-A FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC FIST-GCO2-RSK-LTS

25 Page 25 of 26 Spur joint type 2 kits FIST-GCO2-SJ2-SFKITxx Kit content FIST-GCO2-BC6-NN FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN 1 FIST-SOSA2-4SC-S FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV (pc) FIST-BASKET-A FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC FIST-GCO2-RSK-LTS Spur joint type 3 kits FIST-GCO2-SJ3-SFKITxx Kit content FIST-GCO2-BC6-NN FIST-GCO2-BD6-NN 1 FIST-GCO2-BE6-NN 1 FIST-SOSA2-4SC-S 1 1 FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV (pc) FIST-BASKET-A FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC FIST-GCO2-RSK-LTS

26 Page 26 of 26 Spur joint type 4 kits FIST-GCO2-SJ4-SFKITxx Kit content FIST-GCO2-BC6-NN FIST-GCO2-BD6-NN FIST-GCO2-BE6-NN FIST-SOSA2-4SC-S FIST-SOSA2-8SC-S FIST-SOSA2-2SE-S FIST-SOSA2-4SE-S SMOUV (pc) FIST-BASKET-A FIST-BASKET-B 1 FIST-GCO2-OSK-CC FIST-GCO2-OSK-LTS FIST-GCO2-RSK-CC FIST-GCO2-RSK-LTS Addendum 2 - Overview multi-kits Name Qty/Pk Description Cables that can be Cable to be installed installed through the on day 1 tubes at a later stage FIST-GCO2-MULTI2/9 1 pc multi drop cable kit for 1 cable and 2 tubes multi termination plate with one strength 1 cable max. dia. 14 mm 2 cables max. dia. 9.5 mm termination is included FIST-GCO2-MULTI2/11 1 pc multi drop cable kit for 1 cable and 2 tubes 1 cable 2 cables multi termination plate with one strength max. dia. 14 mm max. dia mm termination is included FIST-GCO2-MULTI2/12 1 pc multi drop cable kit for 1 cable and 2 tubes multi termination plate with one strength 1 cable max. dia. 12 mm 2 cables max. dia. 12 mm termination is included FIST-GCO2-MULTI3/9 1 pc multi drop cable kit with 3 tubes None 3 cables max. dia. 9.5 mm FIST-GCO2-MULTI3/11 1 pc multi drop cable kit with 3 tubes None 3 cables max. dia mm FIST-GCO-MULTI-SEAL 1 pc cable seal kit to seal the cable onto the tube FIST-GCO-MULTI-UCT 1 pc multi termination plate with 3 strength members to be used with the MULTI3 kits Tyco Electronics Raychem NV Telecom Outside Plant Diestsesteenweg 692 B-3010 Kessel-Lo, Belgium All of this information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco and FIST are trademarks. Copyright Tyco Electronics 1999