Date Ver. Edi. Description Page Design by. Second Sample Modify TFT LCD Modify Optical Characteristics

Transcription

1 TECH. CORP. SPECIFICATIONS CUSTOMER : CFR015 SAMPLE CODE : SH320240T-022-I-Q MASS PRODUCTION CODE : PH320240T-022-I-Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 003 DRAWING NO. (Ver.) : LMD-PH320240T-022-I-Q (Ver.001) PACKAGING NO. (Ver.) : PKG-PH320240T-022-I-Q (Ver.001) Customer Approved Date: Approved Checked Designer Rex Liao Rex Liao Yuan Chang Preliminary specification for design input Specification for sample approval Headquarters: POWERTIP TECH. CORP. No.8, 6 th Road, Taichung Industrial Park, TEL: Taichung, Taiwan FAX: 六路 8 sales@powertip.com.tw NO.PT-A-005-8

2 History of Version Date Ver. Edi. Description Page Design by 07/01/ New Drawing. - Poly 09/29/ New Sample - Poly 07/27/ Second Sample Modify TFT LCD Modify Optical Characteristics Yuan Total: 35 Page PH320240T-022-I-Q Page2 SAMPLE Ver.01

3 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Programming Init code 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix 1. LCM Drawing 2. LCM Packaging Specifications Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): SSD2119 PH320240T-022-I-Q Page3 SAMPLE Ver.01

4 1. SPECIFICATIONS 1.1 Features Main LCD Panel Item Display Type LCD Type Screen size (inch) Viewing Direction Color configuration Backlight Standard Value 320* (R G B) * 240 Dots a-si TFT, Normally White, TN mode, Transmissive type 3.5 inch 6 O clock R.G.B. vertical stripe LED B/L Driver IC SSD2119 (262K Colors ) Interface ROHS 1. 8/ 9/ 16/ 18-bit 6800-series /8080-series Parallel Interface. 2. Serial Peripheral Interface (SPI) /6-bit RGB interface (DEN,DOTCLK, HSYNC, VSYNC, DB[17:0]). 4. VSYNC interface (system interface + VSYNC). 5. WSYNC interface (system interface + WSYNC). THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side Mechanical Specifications Item Standard Value Unit Outline Dimension 76.9 (W) * 63.9(L) * 3.5(H)(MAX) mm LCD Panel Item Standard Value Unit Active Area (W) * (L) mm Note For detailed information please refer to LCM drawing. PH320240T-022-I-Q Page4 SAMPLE Ver.01

5 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit System Power Supply Voltage VDDIO VSS V Input Voltage VCI V Operating Temperature T OP C Storage Temperature T ST C Storage Humidity H D Ta < 60 C %RH PH320240T-022-I-Q Page5 SAMPLE Ver.01

6 1.4 DC Electrical Characteristics Module VSS = 0V, Ta = 25 C Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage VDDIO V Input High Voltage V IH1-0.8* VDDIO - VDDIO V Input Low Voltage V IL * VDDIO V Output High Voltage V OH1 IOH=-0.1mA 0.9 * VDDIO - VDDIO V Output Low Voltage V OL1 IOL=0.1mA 0-0.1* VDDIO V Supply Current IDDIO+ICI VDDIO/VCI = 3.3 V Pattern= picture ma VDDIO/VCI = 3.3 V Pattern= Black * ma Note1 Maximum current display. PH320240T-022-I-Q Page6 SAMPLE Ver.01

7 1.5 Optical Characteristics TFT LCD Panel VDDIO =3.3V, Ta=25 C Item Symbol Condition Min. Typ. Max. Unit - Ta = 25 C Response time Tr + Tf ms Note2 θx, θy = 0 Top θy Bottom θy Viewing angle CR 10 Deg. Note4 Left θx Right θx Contrast ratio CR Note3 X White Y X Color of CIE Coordinate With B/L Average Brightness Pattern=white display Uniformity Red Green Blue Ta = 25 C Y θx, θy = 0 X Y X Y Note1 IV cd/m 2 Note1 IF= 20 ma B % Note1 Note1: 1 B=B(min) / B(max) 100% 2 Measurement Condition for Optical Characteristics: a Environment: 25 ±5 / 60±20%R.H no wind dark room below 10 Lux at typical lamp current and typical operating frequency. b Measurement Distance: 500 ± 50 (θ= 0 ) c Equipment: TOPCON BM-7 fast (field 1 ) after 10 minutes operation. d The uncertainty of the C.I.E coordinate measurement ±0.01 Average Brightness ± 4% VIEW AREA LCM Colorimeter=BM-7 fast 500 PH320240T-022-I-Q Page7 SAMPLE Ver.01

8 Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at White state Contrast ratio (CR) = Photo detector output when LCD is at Black state Note4: Definition of viewing angle: Refer to figure as below: PH320240T-022-I-Q Page8 SAMPLE Ver.01

9 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit LED Forward Current If - 30 ma LED Reverse Voltage Vr Ta =25-5 V Power Dissipation Pd 540 mw Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF V Average Brightness (Without LCD &T/P) CIE Color Coordinate (Without LCD &T/P) Color IV If=20mA cd/m 2 X Y White Internal Circuit Diagram PH320240T-022-I-Q Page9 SAMPLE Ver.01

10 2. MODULE STRUCTURE 2.1 Counter Drawing LCM Mechanical Diagram * See Appendix Block Diagram VCI VSS VDDIO RESB DC/SDC E/RD RW/WR CS/SCS SCL SDO SDI WSYNC D0-D17 DOTCLK HSYNC VSYNC OE PS0-PS3 SSD2119 White BL 320* inch TFT LCD A K PH320240T-022-I-Q Page10 SAMPLE Ver.01

11 2.2 Interface Pin Description Pin No Symbol Function 1 VCI Booster input voltage pin. 2 VCI Booster input voltage pin. 3 VSS System ground pin of the IC. 4. VDDIO Voltage input pin for logic I/O. 5 VSS System ground pin of the IC. 6 RESB 7 DC/SDC 8 E/RD 9 RW/WR 10 CS/SCS System reset pin. - An active low pulse at this pin will reset the IC, Connect to VDDIO in normal operation. Data or command. DC: Parallel Interface. SDC: Serial Interface system:E(enable signal) system:RD(read strobe signal). Serial mode: Not used and should be connected to VDDIO or VSS system: RW(indicates read cycle when High, write cycle when Low) system: WR(write strobe signal). CS: Chip Select pin for 6800/8080 Parallel Interface. SCS: Chip select pin for Serial Mode Interface. 11 SCL Serial clock input. 12 SDO Data output pin in serial interface. 13 SDI Data input pin in serial interface. 14 WSYNC Ram Write Synchronization output. -Leave it OPEN when not used. 15 D17 16 D16 17 D15 18 D14 For parallel mode,8/9/16/18 bit interface. Unused pins should connect to VSS. 19 D13 PH320240T-022-I-Q Page11 SAMPLE Ver.01

12 Pin No Symbol Function 20 D12 21 D11 22 D10 23 D9 24 D8 25 D7 26 D6 27 D5 For parallel mode,8/9/16/18 bit interface. Unused pins should connect to VSS. Please refer to Table D4 29 D3 30 D2 31 D1 32 D0 33 VSS System ground pin of the IC. 34 DOTCLK Dot-clock signal and oscillator source. 35 HSYNC Line Synchronization input. 36 VSYNC Frame/Ram Write Synchronization input. 37 OE Display enable pin from controller. 38 VSS System ground pin of the IC. 39 PS0 40 PS1 41 PS2 Please refer to Table PS3 43 VSS System ground pin for the IC. 44 NC No connection, Must be open. 45 NC No connection, Must be open. PH320240T-022-I-Q Page12 SAMPLE Ver.01

13 Pin No Symbol Function 46 NC No connection, Must be open. 47 NC No connection, Must be open. 48 VSS System ground pin for the IC. 49 K Backlight LED s cathode. 50 A Backlight LED s anode. Table 1 PS3 PS2 PS1 PS0 Interface Mode Data bus input bit 6800 parallel interface. D[17:10],D[8:1] bit 6800 parallel interface. D[17:10] bit 8080 parallel interface. D[17:10],D[8:1] bit 8080 parallel interface. D[17:10] bit generic D[17:9] (262k color) + 3-wire SPI If 65K color, D12 shorts to D17 internally bit generic (262k color)+ 3-wire SPI bit generic (262k color)+ 3-wire SPI bit generic D[17:12] (262k color) + 3-wire SPI bits 6800 parallel interface. D[17:0] bits 6800 parallel interface. D[17:9] bit 8080 parallel interface. D[17:0] bit 8080 parallel interface. D[17:9] wire SPI wire SPI. - PH320240T-022-I-Q Page13 SAMPLE Ver.01

14 2.3 Timing Characteristics Interface Timing D/C CS WR RD D0-D17 D/C /CS WR /RD D0-D17 PH320240T-022-I-Q Page14 SAMPLE Ver.01

15 (VDDIO = 3.3V±.0.3V, T A =-40~85ºC) Rating Item Symbol Condition Units Min. Max. Clock Cycle Time tcycle ns Serial Clock Cycle Time SPI Clock tolerance = +/- 2 fclk - 15 MHz ppm Register select Setup Time tas 4 - Register select Hold Time tah Chip Select Setup Time tcss Chip Select Hold Time tcsh Write Data Setup Time tdsw Write Data Hold Time tohw ns Clock Low Time tclkl Clock High Time tclkh Rise time tr Fall time tf PH320240T-022-I-Q Page15 SAMPLE Ver.01

16 Interface Timing VCI VDDIO RESB DC RW CS E D0-D17(WRITE) D0-D17(READ) PH320240T-022-I-Q Page16 SAMPLE Ver.01

17 (VDDIO = 3.3V±.0.3V, T A =-40~85ºC) Item Symbol Condition Rating Min. Max. Units Clock Cycle Time(write cycle) tcycle ns Clock Cycle Time(read cycle) tcycle MHz Address Setup Time(RW) tas 0 - Address Hold Time(RW) tah Data Setup Time(D0-D17,WRITE) tdsw Data Hold Time(D0-D17,WRITE) tdhw Data Access Time(D0-D17,READ) tacc Output Hold time(d0-d17,read) toh Pulse width CS low(write cycle) PW scl ns Pulse width CS high(write cycle) PW sch Pulse width CS low(read cycle) PW scl Pulse width CS high(read cycle) PW sch Rise time tr Fall time tf PH320240T-022-I-Q Page17 SAMPLE Ver.01

18 VSYNC RGB Interface Timing HSYNC DOTCLK Pixel Data Item Symbol Condition DOTCLK Frequency (70Hz frame rate) (VDDIO = 3.3V±.0.3V, T A =-40~85ºC) Rating Min. Typ. Max. Units f DOTCLK MHz DOTCLK Period f DOTCLK ns Vertical Sync Setup Time t vsys Vertical Sync Hold Time t vsyh Horizontal Sync Setup Time t HSYS ns Horizontal Sync Hold Time t HSYH Phase difference of Sync Signal Falling Edge t HV t DOTCLK DOTCLK Low Period t CLK DOTCLK High Period t CKH Data Setup Time t DS ns Data hold Time t DH PH320240T-022-I-Q Page18 SAMPLE Ver.01

19 2.3.4 Serial Interface Timing SDC SCS SCL SDI SCS SCL SDI PH320240T-022-I-Q Page19 SAMPLE Ver.01

20 (VDDIO = 3.3V±.0.3V, T A =-40~85ºC) Item Symbol Condition Rating Min. Typ. Max. Units Clock Cycle Time t cycle ns Serial Clock Cycle Time SPI Clock tolerance=+/-2 ppm f CLK MHz Register select Setup Time t AS Register select Hold Time t AH Chip Select Setup Time t CSS Chip Select Hold Time t CSH Write Data Setup Time t OSW Write Data Hold Time t OHW Clock Low Time t CLKL Clock High Time T CLKH Rise time t R Fall time t F ns PH320240T-022-I-Q Page20 SAMPLE Ver.01

21 RESB (VDDIO = 3.3V±.0.3V, T A =-40~85ºC) Rating Item Symbol Condition Units Min. Max. Reset pulse duration tres us PH320240T-022-I-Q Page21 SAMPLE Ver.01

22 2.4 Programming Init code ;For SSD bit 8080-series Parallel Interface. INIT_MAIN ADDRL,#28H ADDRL,#06H ADDRL,#00H ADDRL,#01H ADDRL,#01H ADDRH,# b ADDRL,#efH ;EFH ADDRL,#02H ADDRH,#06H ADDRL,#00H ADDRL,#03H ;VGH/VGL Voltage Setting ADDRH,#64H ADDRL,#64H ADDRL,#10H ADDRL,#00H ADDRL,#11H ADDRH,#64H ADDRL,#30H PH320240T-022-I-Q Page22 SAMPLE Ver.01

23 PH320240T-022-I-Q Page23 SAMPLE Ver.01 SPEC Edi.003 DELAY DELAY ADDRL,#07H ADDRL,#33H DELAY ADDRL,#25H ADDRH,#e0H ADDRL,#00H ADDRL,#0bH ADDRH,#53H ADDRL,#08H ; Adjust the Gamma Curve ADDRL,#30H ADDRH,#BFH ADDRL,#BDH ADDRL,#31H ADDRH,#52H ADDRL,#47H ADDRL,#32H ADDRH,#DDH ADDRL,#BAH ADDRL,#33H

24 PH320240T-022-I-Q Page24 SAMPLE Ver.01 SPEC Edi.003 ADDRH,#35H ADDRL,#0EH ADDRL,#34H ADDRH,#A6H ADDRL,#BFH ADDRL,#35H ADDRH,#39H ADDRL,#BCH ADDRL,#36H ADDRH,#C5H ADDRL,#20H ADDRL,#37H ADDRH,#34H ADDRL,#1EH ; power on sequence ADDRL,#0CH ADDRL,#05H DELAY DELAY DELAY ADDRL,#0dH ADDRL,#12H DELAY

25 DELAY DELAY ADDRL,#1eH ;VCOMH setup ADDRL,#E6H DELAY ADDRL,#0eH ;VCOML setup ADDRH,#29H ADDRL,#00H DELAY ADDRL,#26H ADDRH,#7cH ADDRL,#00H ADDRL,#27H ADDRL,#6dH PH320240T-022-I-Q Page25 SAMPLE Ver.01

26 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales R&D Q.A Manufactur ing Product control Purchase Inventory control Info Survey Marketing Request Inquiry Project evaluation & Design Project Validation NG Quote OK Contract Design check Sample Approval NG Sample test NG Verification OK Sample approval OK Pilot Run & Mass Product NG Pilot run & Reliability test Verification OK Specification preparation Mass production OK Inspection NG Ship Out Shipment Ship out PH320240T-022-I-Q Page26 SAMPLE Ver.01

27 Item Customer Sales R&D Q.A Manufactu ring Product control Purchase Inventory control Info Claim Sales Service Analysis report Failure analysis Corrective action Tracking Q.A Activity 1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management PH320240T-022-I-Q Page27 SAMPLE Ver.01

28 3.2. Inspection Specification PH320240T-022-I-Q Page28 SAMPLE Ver.01

29 PH320240T-022-I-Q Page29 SAMPLE Ver.01

30 PH320240T-022-I-Q Page30 SAMPLE Ver.01

31 PH320240T-022-I-Q Page31 SAMPLE Ver.01

32 PH320240T-022-I-Q Page32 SAMPLE Ver.01

33 PH320240T-022-I-Q Page33 SAMPLE Ver.01

34 4. RELIABILITY TEST 4.1 Reliability Test Condition (VER.B01) NO. TEST ITEM TEST CONDITION High Temperature Keep in hrs Storage Test Surrounding temperature, then storage at normal condition hrs. Keep in -30 hrs Surrounding temperature, then storage at normal condition hrs. Low Temperature Storage Test High Temperature / High Humidity Storage Test Temperature Cycling Storage Test Keep in / % R.H duration for hrs Surrounding temperature, then storage at normal condition hrs. (Excluding the polarizer) ( mins) ( mins) ( mins) ( mins) Cycle Surrounding temperature, then storage at normal condition hrs. ESD Test Vibration Test (Packaged) Drop Test (Packaged) Air Discharge: Apply KV with times Discharge for each polarity +/- Contact Discharge: Apply V with times discharge for each polarity +/- 1. Temperature ambiance : 2. Humidity relative : % % 3. Energy Storage Capacitance(Cs+Cd) : pf % 4. Discharge Resistance(Rd) : % 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : %) 1. Sine wave Hz frequency ( min/sweep) 2. The amplitude of vibration : mm 3. Each direction (X Y Z) duration for Hrs Packing Weight (Kg) Drop Height (cm) Drop Direction : 1 corner / edges / sides each time. PH320240T-022-I-Q Page34 SAMPLE Ver.01

35 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING Avoid any strong mechanical shock which can break the glass Avoid static electricity which can damage the CMOS LSI When working with the module, be sure to ground your body and any electrical equipment you may be using Do not remove the panel or frame from the module The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch, push or rub the exposed polarizing with anything harder than an HB pencil lead (glass, tweezers, etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate Do not touch the display area with bare hands, this will stain the display area Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent To control temperature and time of soldering is 320 ± 10 C and 3-5 sec To avoid liquid (include organic solvent) stained on LCM. 5.3 STORAGE Store the panel or module in a dark place where the temperature is 25 C ± 5 C and the humidity is below 65% RH Do not place the module near organics solvents or corrosive gases Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions Unaccepted responsibility This product has been manufactured to your company s specification as a part for use in your company s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH320240T-022-I-Q Page35 SAMPLE Ver.01

36

37