VISSONIC ELECTRONICS LIMITED. Signal Management. 2015~2016 Catalogue. Copy right by Vissonic Electronics Limited 2015/1/1

Transcription

1 VISSONIC ELECTRONICS LIMITED Signal Management 2015~2016 Catalogue Copy right by Vissonic Electronics Limited 2015/1/1

2 CONTENT Signal Management Products VIS-SHM Series Seamless Hybrid Matrix Switchers...Page 3 VIS-HM Series Hybrid Matrix Switchers...Page 15 VIS-PSC9 Professional Scaler Switcher...Page 19 VIS-PH44 UHD4K2K HDMI 4X4 Matrix...Page 24 VIS-PHD88 UHD4K2K HDMI MATRIX...Page 27 VIS-HD88 HDMI MATRIX...Page 30 VIS-HM44 HDBaseT Matrix...Page 33 VIS-HS12H HDBaseT Spliter...Page 36 VIS-HS14 HDBaseT Spliter...Page 39 VIS-HS18 HDBaseT Spliter...Page 42 VIS-HE7H HDBaseT Extender...Page 45 VIS-HE10H HDBaseT Extender...Page 48 VIS-HDS14 HDBaseT Receiver with 4 HDMI Out...Page 51 VISSONIC ELECTRONICS LIMITED Building-B, NanGang Business Park, BiGang Road HuangPu District,Guangzhou China Phone: Mobile: inquiry@vissonic.com Web: 2

3 VIS-SHM Series Seamless Hybrid Matrix Switcher 3

4 VIS-SHM0808 Seamless Hybrid Matrix Switcher Features Seamless switching without any blank and frozen screen Available in I/O sizes from 1x1 to 8x8 Configurable of a variety of I/O cards, HDMI,VGA, HDBaesT, DVI,SDI and fiber etc Built-in scaler to up scale the low resolution source for every output Color, brightness, contrast and saturation are adjustable for every output Audio breakaway switching Scalable video wall processing for videowalls with up to 8 displays Configurable and editable OSD text for the input channels to mark the signal sources Hot-swappable design TCP/IP network control, RS232 serial control and the front keyboard control N*M combination feature is optional! ---That means you can set up like 1*16, 3*9, 12*3 etc any input/output in one chassis 4

5 HD1i/HD1o HDMI Input and Output blades with Analog Stereo Audio Features Seamless switching technology Support HDPC resolution up to and HDTV resolution up to HDCP compliant Intelligent EDID management Signal and power indicators for detecting the signal and power status on the blade Configurable and editable OSD text for the input channels to mark the signal sources VA1i/VA1o VGA Input and Output blades with Analog Stereo Audio Features Support seamless switching One VGA input/output with 3.5MM audio; Configurable and editable OSD text for the input channels to mark the signal sources Green LED indicator for detecting the VGA input 5

6 Red LED indicator for detecting the power of the card Bandwidth up to 450MHz(-3dB) ) Support VGA SVGA XVGA SXGA UXGA WUXGA HD1080P signal input/output; TP1i/TP1o HDBaseT Input and Output blades with Analog Stereo Audio Features Support seamless switching Green LED indicator for detecting the HDBaseT input Red LED indicator for detecting the power of card Transmit the signal up to 100m via CAT5e/6 cable, working with the HDBaseT transmitter/receiver Support HDBaseT1.0, HDCP; DVI1i/DVI1o DVI Input and Output blades with Analog Stereo Audio Features One DVI input, support 3.5MM audio input;

7 Support arbitrarily configurable OSD indicator for input source; Led indicator for valid signal detecting; One DVI output, one 3.5MM audio output interface; Seamless switch of audio and video; Configurable resolution for video output; Support video splitting output; Led indicator for valid signal detecting; SDI1i/SDI1o SDI Input and Output blades with Analog Stereo Audio Features One SDI input and one SDI loop out, support 3.5MM audio input; Support arbitrarily configurable OSD indicator for input source; Led indicator for valid signal detecting; Support SD-SDI HD-SDI 3G-SDI standard and support 1080p; Comply with SMPTE424M, SMPTE292M and SMPTE259M standard, support hotplug; Two SDI output port, one 3.5MM audio output interface; Seamless switch of audio and video; Configurable resolution for SDI output; Support video splitting output; Led indicator for valid signal detecting; Support SD-SDI/HD-SDI/3G-SDI standard, support 1080p; Comply with SMPTE424M/SMPTE292M/SMPTE259M,support hotplug; CVBS1i/CVBS1o CVBS Input and Output blades with Analog Stereo Audio 7

8 Feattures One CVBS input, support 3.5MM audio input; Support arbitrarily configurable OSD indicator for input source; Led indicator for valid signal detecting; One CVBS output, one 3.5MM audio output interface; Seamless switch of audio and video; Configurable resolution for video output; Support video splitting output; Led indicator for valid signal detecting CVBS1i/CVBS1o CVBS Input and Output blades with Analog Stereo Audio Feattures One YPbPr input, support 3.5MM audio input; Support arbitrarily configurable OSD indicator for input source; Led indicator for valid signal detecting; Support NTSC3.58 NTSC4.42 PALand SECAM; One YPbPr Output, one 3.5MM audio output interface;

9 Seamless switch of audio and video; Configurable resolution for video output; Support video splitting output; Led indicator for valid signal detecting; System Diagram 9

10 Application Specification Main Chassis Model VIS-SHM0808 VIS-SHM1717 VIS-SHM3636 VIS-SHM17-M VIS-SHM36-M Total Slots N+M< =17 N+M<=36 Input Slots N<17 N<36 Output Slots M<17 M<36 Control Front key panel, IR, RS232 and TCP/IP Dimensions 440X400X89 440X400X X400X X400X89 440X400X225 Work environment Storage environment Power Supply Maximum power mm(2u) mm (5U) mm (10U) mm(2u) mm(5u) Temperature: -20 ~ +70, humidity: 10%~90% Temperature: -20 ~ +50, humidity: 10%~80% 100~260V 50/60Hz 100W 200W 450W 100W 200W 10

11 dissipation Weight 7Kg 15Kg 31Kg 7Kg 15Kg Running Work without interruption for 7X24 hours Hours MTBF 10,000 hours Warranty One year warranty and lifetime maintenance Note: The model VIS-SHM17-M and VIS-SHM36-M can be defined the quatity of maximum input and output slots by software to get the inputs and outputs completely match your need. For example,vis-shm17,it provide 17 slots for defining input and output.you can set it as 3 IN 14 OUT matrix,9 IN 8 OUT or 15 IN 2 OUT matrix etc, any combination of inputs and outputs matrix. VA1i VGA Input Blade specifications: Interface D-Sub 15 pin, female,3.5mm audio input interface Format RGBHV,RGBS,RGsB,RsGsBs Input voltage 0.5~2.0Vp-p Input impedance 75Ω Resolution support 1024x768@60hz ~ 1920x1200@60hz Bandwidth 450MHz(-3dB) VA1o VGA Output Blade Specifications Interface D-Sub 15 pin, female, 3.5MM audio output interface Format RGBHV,RGBS,RGsB,RsGsBs Output Voltage 0.5~2.0Vp-p Output impedance 75Ω Resolution support 1024x768@60hz ~ 1920x1200@60hz Bandwidth 450MHz(-3dB) TP1i HDBaseT Input Blade specifications Interface Format Bandwidth RJ45 female HDBaseT1.0 standard 20Gbps Resolution support HDPC:1920x1200@60Hz HDTV:1920x1080@60Hz 3D:1920*1080@60Hz Transmission distance Length up to 100M TP1o HDBaseT Output Blade specifications Interface Standard Bandwidth Resolution support RJ45, female HDBaseT1.0 20Gbps HDPC:1920x1200@60Hz HDTV:1920x1080@60Hz 3D:1920*1080@60Hz 11

12 Transmission distance Length up to 100M HD1i 一 --HDMI Input Blade specifications Interface HDMI Type A, female, 3.5MM audio output interface Protocol HDMI1.3, HDCP1.3, compatible with DVI1.0 Bandwidth 6.75Gbps, digital Maximum resolution Minimum and maximum level TMDS 2.9V/3.3V Input impedance 50Ω Bit clock jitter <0.15 Tbit Bit rising time <0.3 Tbit(20%~80%) Bit falling time <0.3 Tbit(20%~80%) Transmission delay 5ns(±1ns) EDID Support EDID and DDC management HD1o--HDMI Output Blade specifications Interface HDMI Type A, female, 3.5MM audio output interface Protocol HDMI1.3, HDCP1.3, compatible with DVI1.0 Bandwidth 6.75Gbps, digital Maximum resolution Minimum and maximum level TMDS 2.9V/3.3V Input impedance 50Ω Bit clock jitter <0.15 Tbit Bit rising time <0.3 Tbit(20%~80%) Bit falling time <0.3 Tbit(20%~80%) Transmission delay 5ns(±1ns) EDID Support EDID and DDC management DVI1i--DVI Input Blade specifications Interface DVI-I 24+5 pin, female, 3.5MM audio input interface Protocol Bandwidth Maximum resolution DVI1.0 protocol,hdcp1.3 protocol,compatible HDMI Gbps,digital Minimum and maximum level Input impedance Bit clock jitter Bit rising time Bit falling time Transmission delay TMDS 2.9V/3.3V 50Ω <0.15 Tbit <0.3 Tbit(20%~80%) <0.3 Tbit(20%~80%) 5ns(±1ns) 12

13 EDID Support EDID and DDC management DVI1o--DVI Output Blade specifications Interface DVI-I 24+5 pin female, 3.5MM audio output interface Protocol Bandwidth Maximum resolution Input voltage Input impedance Bit clock jitter Bit rising time Bit falling time Transmission delay EDID DVI1.0, HDCP1.3, HDMI Gbps, digital TMDS 2.9V/3.3V 50Ω <0.15 Tbit <0.3 Tbit(20%~80%) <0.3 Tbit(20%~80%) 5ns(±1ns) Support EDID and DDC management SDI1o--SDI Input Blade specifications Interface Video format Data rate Input impedance BNC*2 female,3.5mm audio input interface SD-SDI/HD-SDI/3G-SDI 270Mbps 1.485Gbps 2.97Gbps 75Ω Signal amplitude 0.8V p-p ±10% Rise and fall time Minimum and maximum level 400~700ps 0.5V to 1.0 V p-p SDI1o--SDI Ouput Blade specifications Interface Format Data rate Input impedance BNC*2 female, 3.5MM audio output interface SD-SDI/HD-SDI/3G-SDI 270Mbps 1.485Gbps 2.97Gbps 75Ω Signal amplitude 0.8V p-p ±10% Rise and fall time Minimum and maximum level 400~700ps 0.5V to 1.0 V p-p CVBS1i--CVBS Iuput Blade specification Signal type Interface Format Input Voltage Input impedance Resolution support Composite video BNC female,3.5mm audio input interface Support NTSC3.58, NTSC4.42, PAL and SECAM 0.5~2.0V p-p 75Ω 480i,576i 13

14 Bandwidth 200MHz(-3dB) CVBS1o-- CVBS Ouput Blade specification Video Type Interface Format Input voltage Input impedance Resolution support Bandwidth Composite Video BNC female, 3.5MM audio output interface NTSC,PAL and SECAM 0.5~2.0V p-p 75Ω 480i,576i 200MHz(-3dB) YPbPr1i- YPbPr Input Blade specification Signal type Interface Standard Input voltage Input impedance Resolution support Bandwidth YPbPr RCA*3 female,3.5mm audio input interface EIA-770.2a 0.5~2.0V p-p 75Ω 480i,576i,480p,576p,720p,1080i,1080p 450MHz(-3dB) YPbPr1o- YPbPr Ouput Blade specification Video Type Interface Standard Input voltage Input impedance Resolution support Bandwidth YPbPr RCA*3 female, 3.5MM audio output interface EIA-770.2a 0.5~2.0V p-p 75Ω 480i,576i,480p,576p,720p,1080i,1080p 450MHz(-3dB) 14

15 VIS-HM Series Hybrid matrix switcher matrix Overview VIS-HM Series is a new generation modular video matrix switcher which offers an easier way to route any video sources to any displays, with seamless switching in a way that blank screen does not appear in the switching process. Flexible configuration can adapt to different types of video sources and different types of displays to meet your project needs without any additional signal convert. It is the ideal equipment for command center, dispatching center, conference center, video conference system etc. Features Available in I/O sizes from 4x4 to 32x32---The flexible 2 ports blade design of 'one channel one card' to make you get your own matrix for the project and no need to pay for the free channel. Configurable of a variety of I/O cards, HDMI, HDBaseT, VGA, DVI, fiber and SDI etc---we keep fast switching and rich of cards for different project situations. All in one with HDBaseT - HDBaseT card provide two-way IR,RS232 interface for transmit with video/audio via a CAT5E/CAT6 cable to up to 100m. Hot-swappable design---add or remove the in/out cards at any time and don't have to power down the matrix. Audio breakaway switching--- Each input card provide 3.5MM audio input interface and each output card provide 3.5MM audio output interface, audio and video switch simultaneously. Scalable video wall processing for videowalls with up to 32 displays TCP/IP network control, RS232 serial control and the front keyboard control HDCP compliance. Standard 2U case with rack mount structure. 15

16 Redundant Power Supply---Power Supply system can automatically switch to spare power supply when one supply does not work normally or properly. HDMI Blade Overview: HDMI input/output blade is the part of the hybrid matrix to meet the different signal switching requirement Features: 2 channel x HDMI 1.4, with audio extraction from HDMI signal support HDPC resolution up to and HDTV resolution up to 1920x1080@60Hz HDCP compliant Intelligent EDID management High resolution image output without compression Parameter: Type: HDMI 1.4 Signal out: HDCP 1.3a,&DVI X1080p@60Hz and below, support 3D DVI 1.0 VESA Signal Electric: TMDS 2.9V/3.3V Audio: Output stereo Power: DC5V Consumption: 5W HDbaseT Blade

17 Overview: HDbaseT input/output blade is the part of the hybrid matrix to meet the different signal switching requirement Features: Transmit the signal up to 100m via CAT5e/6 cable, working with the HDBaseT transmitter/receiver RS232/IR Signals pass together with RJ45 cable Support HDBaseT1.0, HDCP Parameter: Output type: RJ45 as CAT5e/6 HDBaseT Support HDMI 1.4 and Other signal: RS-232, IR Transmission distance: 100 meter (Cat6) Power: Input voltage DC5V Power consumption: 10W Fiber Optic Blade Overview: Optical fiber signal output board, use LC fiber optic connectors, hot-swappable. Supports 2-way single mode signal output, each port has a photoelectric conversion function. Full HD 60Hz resolution. Suitable for use in long-distance or long distance transmission of high definition signal

18 Features: Full HD 60Hz resolution; Resolution Automatic setting; Hot-swapping for blades; Support for single-mode fiber transmission; Transmit to distance of 2km (optional 15km); 3D Noise Reduction; Hardware uncompressed real-time conversion. Parameter: Input port: LC X 2 Signal:850nm,Single mode fiber Optic power:-5-6dbm PowerVoltage : DC5V Consumption: 5W Working Temperature: 0-60 Specification Model VIS-HM0404 VIS-HM0808 VIS-HM1616 VIS-SHM3232 Total Slots Input Slots Output Slots Control Dimensions Work environment Storage environment Front key panel, IR, RS232 and TCP/IP 440X400X89 440X400X89 440X400X225 mm(2u) mm(2u) mm (5U) Temperature: -20 ~ +70, humidity: 10%~90% Temperature: -20 ~ +50, humidity: 10%~80% 440X400X445 mm (10U) Power Supply 100~260V 50/60Hz 100~260V 50/60Hz Maximum power dissipation 100W 100W 200W 450W Weight 7Kg 7Kg 15Kg 31Kg Running Hours MTBF Warranty Work without interruption for 7X24 hours 10,000 hours One year warranty and lifetime maintenance 18

19 VIS-PSC9 Professional Scaler Switcher Overview: New generation scaler switcher VIS-PSC9 offers you a great flexibility to process with various signals type in one environment. During the transition from traditional video formats like VGA, Composite video etc to HDMI HD signals, the scaler acting as a intermediate device to connecting together. With it you can convert any type of signal to HDMI displays. Moreover, the HDbaseT port can even extend the signal out to 100 meter away, inside mini amplifier to save you cost for small-sized applications. It's a device plays important role in: multi-media conference room, schools, broadcasting center, medical education, command center etc. Features Multi-type signal input---- including HDMI, HDbaseT, DisplayPort, CV, VGA, YPbPr Upscale to 1 HDMI & 1 HDbaseT output simultaneously---- Support multiple output resolutions, unique scaling function makes it compatible with most used resolutions, up to 1920x1200 & 1080P HD. Fast switching technology---- The high processing chipset makes the video image frozen during switching, so it's more faster and glitch-free. HDCP Compliant, HDMI Deep color Balanced stereo audio amplifier---- output by: 8Ω,2x20W@4Ω, or choose to Line Out. Powerful audio processing with video----analog audio signal input and can be breakaway to combine with video input. The audio can be de-embedded or embedded with HDMI signal Smart EDID Manager inside---- User can load their own EDID or use the default EDID storage Master audio control---- Front panel knob can easily control the master audio and have one-key mute feature. 19

20 HDbaseT twisted pair port----users can easily extend the output to 100 meters with CAT5 cable, meanwhile the RS232 commands can pass-through with the HDbaseT signal together. We have compatible receiver for working with it. Control Methods----Front panel control,ir remote control,rs232 & TCP/IP control System Diagram Recommend Accessories: VIS-HE7H HDMI Cat5 extender, to send the HDMI output of VIS-PSC9 to 70 meters. click for info VIS-HDS HDMI Cat5 receiver, to extend the HDMI remote distance and split to 4 displays. click for info 20

21 Application Specification Analog CV video/ypbpr video Gain Bandwidth Format Differential phase error Differential gain error Switching speed Signal type Interface Minimum / maximum level Impedance Return loss Analog VGA video Gain Bandwidth Signal type Interface Signal strength Impedance Return loss DC compensation 0dB -3dB NTSC,PAL,SECAM 0.1, MHz 0.1%, MHz 200 ns(the maximum time) Composite video(cvbs), Component video(ypbpr/ycbcr) RCA female joint(4pin),1(cvbs),1(ypbpr/ycbcr) Analog signal: -2V/+2V 75 Ω <-30dB@5MHz 0 db 380 MHz VGA 15-pin HD female interface,2 VGA input 0.63V p-p to 0.9 V p-p 75 Ω <-40dB@5MHz Maximum ±5mV 21

22 Hz; Supported resolution HDMI video Supported protocols HDMI1.3a,DVI1.0,HDCP1.3 Maximum pixel clock 225MHz Interface bandwidth 6.75Gbps(RGB:2.25 Gbps/per lane) Signal type In HDMI 1.3a / DVI 1.0 specifications HDMI / DVI-D all-digital T.M.D.S. signal Interface HDMI-A interface (Type A connector ),3 HDMI input,1hdmi output Minimum / maximum level T.M.D.S.2.9V/3.3V Impedance 100 Ω Input EDID Use the system default EDID,( Supports EDID mapped to the input terminal) The maximum DC bias error 15mV The input distance is less than 25 meters;output less than 10 meters,in Recommended maximum input 1920x1080p@60(you re recommended to use the certified HDMI distance dedicated wire, such as the Molex TM wire.) 640x480@60Hz;800x600@60Hz;1024x768@60Hz;1280x720@60Hz; 1280x800@60Hz;1280x960@60Hz;1280x1024@60Hz;1360x768@60 Hz; Supported resolution 1366x768@60Hz;1400x1050@60Hz;1440x900@60Hz;1600x1200@6 0Hz; DisplayPort video Interface 20-pin DP interface, standard,1 DisplayPort input Supported protocols DisplayPort 1.1 Maximum transmission delay 500us Transmission bandwidth The maximum of transmission bandwidth is 10.8Gb/S 640x480@60Hz;800x600@60Hz;1024x768@60Hz;1280x720@60Hz; 1280x800@60Hz;1280x960@60Hz;1280x1024@60Hz;1360x768@60 Hz; Supported resolution 1366x768@60Hz;1400x1050@60Hz;1440x900@60Hz;1600x1200@6 0Hz; HDBaseT video 22

23 Interface RJ-45 female interface;1 HDBaseT input,1 HDBaseT output Supported protocols Conform to HDCP standard Maximum pixel clock 225MHz Impedance 100Ω Recommended maximum input distance The maximum transmission distance is 100m(use standard Cat5 enhanced or Cat6 cable) Hz; Supported resolution Audio signal Input/output interface 9 3-pin phoenix joint/each has unbalanced audio input,balanced audio amplifier output of 1 4-pin phoenix joint Gain 0 db Frequency response 20 Hz~20 khz, THD + Noise 0.05%@1 khz (with rated voltage) Signal-to-Noise(S/N ) >80dB Stereo separation >80dB@1 khz Common-mode rejection ratio(cmrr) >75dB@:20 Hz ~ 20 khz Signal type stereo Impedance input:>10 kω(unbalanced) maximum input level +19.5dBu, Gain error 20 Hz ~ 20 khz Control Way button Front panel, LCD screen status display serial control interface RS-232,9-pin female D-type interface Baud rate and protocol Baud rate:115200,data bits:8 bits,stop bits:1,no parity The serial control port structure 2=TX,3=RX,5=GND Ethernet control interface RJ-45 female interface Ethernet control protocol TCP/IP Ethernet control rate Adaptive 10M/100M,full-duplex or half-duplex HDBaseT remote HDBaseT remote RS232 control Others Power supply 100VAC~240VAC,50/60Hz Temperature Storage and operation temperature:-20 ~+70 C Humidity Storage and operation humidity:0 ~.95% Chassis Size 483(L)X230(W)X44mm(H) Product weight About 2.3kg 23

24 MTBF Warranty 30,000 hours 1 year free warranty and lifetime maintenance 24

25 VIS-PHD44 UHD4Kx2K HDMI 4x4 matrix Overview: PHD series HDMI matrix is professional switcher routs UHD 4Kx2K HDMI signals to any outputs in need. It provides high peak data transfer rate and perfectly supports synchronous switching of HDMI signals, the robust industrial design makes it able to be a signal management center for high definition signal transmission. It can be widely used in command control center, multi-screen systems, conference room, high definition medical or education teaching etc. Features Support 4 HDMI inputs and 4 HDMI outputs Support 3 GHz video formats up to 4k 2k at 24 Hz/25 Hz/30 Hz, in addition to all mandatory HDMI 3D TV formats. HDCP and DVI compliant Supports 10/100Mbps Ethernet network connection Supports Baud rates up to bps No loss and no delay HDMI crosspoint switch Support HDMI 1.4 protocol Flexible control: front key panel with LCD, RS232 bus, TCP/IP control with RJ45 interface Input HDMI cable lengths up to 30 meters Mode saving function, can save and load 32 different scenes. Supports default HDMI EDID and learns the EDID of displays Easy installation with rack-mounting design 25

26 System Diagram Application

27 Specification Model Input type Output type Video Protocol Maximum resolution HDMI interface Serial Interface Input cable length Output cable length RJ45 control protocol Ethernet rate VIS-PHD44 HDMI HDMI HDMI 1.4, HDCP 1.3, compliant to DVI1.0 Up to 4kx2k at 24 Hz/25Hz/30Hz Type A, 19 pin, female RS-232 IN, DB9, Female; RS-232 OUT, DB9, Male Adaptive equalizer for cable lengths up to 30 meters 15m TCP/IP Self-adaptive 10M/100M Storage environment Temperature: -20 ~ +70, humidity: 10%~90% Work environment Temperature: -20 ~ +70, humidity: 10%~90% Power supply AC 110~240V Maximum power dissipation 10W Dimensions(WxDxH) Weight MTBF Warranty 1U( 436.8X280X44.5)mm About 2.3Kg 30,000 hours One year warranty and lifetime maintenance 27

28 VIS-PHD88 UHD4Kx2K HDMI 8x8 matrix Overview: PHD series HDMI matrix is professional switcher routs UHD 4Kx2K HDMI signals to any outputs in need. It provides high peak data transfer rate and perfectly supports synchronous switching of HDMI signals, the robust industrial design makes it able to be a signal management center for high definition signal transmission. It can be widely used in command control center, multi-screen systems, conference room, high definition medical or education teaching etc. Features Support 8 HDMI inputs and 8 HDMI outputs Support 3 GHz video formats up to 4k 2k at 24 Hz/25 Hz/30 Hz, in addition to all mandatory HDMI 3D TV formats. HDCP and DVI compliant Supports 10/100Mbps Ethernet network connection Supports Baud rates up to bps No loss and no delay HDMI crosspoint switch Support HDMI 1.4 protocol Flexible control: front key panel with LCD, RS232, TCP/IP control with WEB GUI Input HDMI cable lengths up to 30 meters Mode saving function, can save and load 32 different scenes. Supports default HDMI EDID and learns the EDID of displays Easy installation with rack-mounting design 28

29 System Diagram Application 29

30 Specification Model VIS-PHD88 Input type HDMI Output type HDMI Video Protocol HDMI 1.4, HDCP 1.3, compliant to DVI1.0 Maximum resolution Up to 4kx2k at 24 Hz/25Hz/30Hz HDMI interface Type A, 19 pin, female Serial Interface RS-232 IN, DB9, Female; RS-232 OUT, DB9, Male Input cable length Adaptive equalizer for cable lengths up to 30 meters Output cable length 15m RJ45 control protocol TCP/IP Ethernet rate Self-adaptivee 10M/100M Storage environment Temperature: -20 ~ +70, humidity: 10%~90% Work environment Temperature: -20 ~ +70, humidity: 10%~90% Power supply AC 110~240V Maximum power dissipation 10W Dimensions(WxDxH) 1U( 436.8X280X44.5)mm Weight About 2.3Kg MTBF 30,000 hours Warranty One year warranty and lifetime maintenance

31 VIS-HD88 HDMI 8x8 matrix switcher Overview: This is advanced HDMI matrix, support up to 1080P resolution, HDMI1.4, 3D features. The 8x8 HDMI Matrix can connect four HD Sources with four HD Displays; it can easily switch and distribute four HD Source signals to four HD displays at the same time. It offers solutions for data center control, information distribution, conference room presentation, school and corporate training environments. Features Eight Input HD Source signals switch and distribute to four HD Displays Support 30/36 Bit Deep Color Support Blue-Ray DVD24/50/60fs/HD-DVD/xvYCC Support Audio Format:DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD Support Signal Retiming Input HDMI Cable length up to 10M if use the standard HDMI Cable; Output HDMI Cable length up to 15M if use the standard HDMI Cable. It can use the remote to choose the signal source or switch the input signal source by press the switch button. 31

32 System Diagram Application 32

33 Specification Model HDMI0808 Input type HDMI Output type HDMI Video Protocol HDMI 1.3, HDCP 1.3, compliantto DVI1.0 Pixel bandwidth 165MHz Maximum resolution 1080p 60hz HDMI interface HDMI-A female Serial Interface RS-232, DB9 Maximum input cable < 20m length RJ45 control protocol TCP/IP Ethernet rate Self-adaptivee 10M/100M Storage environment Temperature: -20 ~ +70, humidity: 10%~90% Work environment Temperature: -20 ~ +70, humidity: 10%~90% Power supply 100VAC ~ 240VAC, 50/60 Hz Maximum power dissipation 35W Dimensions 437(L)X300(W)X89 (H) Weight About 5Kg MTBF 30,000 hours Warranty One year warranty and lifetime maintenance

34 VIS-HM44 HDBaseT 4x4 matrix Overview: The VIS-HM44 offer you great flexibility to transmit 4 channel HDMI signal route to 4 HDBaset output or 4 mirroring HDMI out locally. By HDbaseT technology, the IR bi-directional/rs232 commands can be pass together with HDMI video signal up to 100 meters.the VIS-HM44 HDBaseT matrix can work with receiver VIS-HE7M-RX to get the video and achieve the control remotely up to 70m. It can be applied in the place where has multiple HDMI sources and then with more than one displays close or away from the sources. Purchasing information: HDBaseT to HDMI Receiver up to 70m-Model VIS-HE7M-RX Features HDMI matrix integrated with HDbaseT CAT5e/6 transmission Any input channel can be routed to any output, for the signal from 480P to 1080P, HDMI and HDbaseT output at the same time. Audio formats support: Dolby True-HD/DTS Master audio Multi-way for controlling like front panel, remote IR, RS232, Ethernet etc. HDCP compliant, 3D signal 34

35 System Diagram Application 35

36 Specification VIS-HM44 HDBaseT 4x4 matrix Operating Temperature: - Operating Humidity: Video Bandwidth: Video Format: Connector Transmission Distance: Power supply Power Consumption: Dimension: Weight: 5 to +35 (+23 to +95 ) 5 to 90%RH (No Condensation) 225MHz/6.75Gbps Up to 1080P@60Hz@36 b/pixels, and 3D HDMI,RJ45,IR,RS P 328FT/100m(MAX) over single Cat5e/6 110/240V 12VDC power supply 20watts 442Wx170Dx44H(mm) 2.4KG

37 VIS-HS12 HDBaseT 1x2 Spliter Overview: To extend your HDMI signal in different remote area, the VIS-HS12 HDBaseT splitter is the best solution to achieve, without any signal loss, even it could receive the IR signal from the terminal by its Bi-directional IR/CEC pass through features. The spliter VIS-HS12 can work with the receiver VIS-HE7M-RX to get the video and achieve the control remotely up to 70m. Purchasing information: HDBaseT to HDMI Receiver up to 70m-Model no. VIS-HE7H-RX HDBaseT 1x2 Spliter up to 100m model no.vis-hs12h which work with 100m HDBaseT extender VIS-HE10H-RX Features Transmit 1 HDMI signal to 2 outputs separately to remote area via Cat5e/6 70 meter/100 meter two optional devices HDMI support 3D, resolution from 1080P to 4Kx2K, HDCP compliance Bi-directional IR/CEC pass through Output can pass the RS232 and Ethernet (VIS-HS12 Lite version doesn't feature it) Support TrueHD Dolby&DTS DTS-HD audio 37

38 System Diagram 38

39 Application Specification VIS-HS12 HDBaseT 1x2 Spliter Operating Temperature: - Operating Humidity: Video Bandwidth Video Format: Transmission Distance: Power Consumption: Dimension: Weight: 5 to +35 (+23 to +95 ) 5 to 90%RH (No Condensation) 300MHz/9Gbps 1080P@60Hz/4K& 3D video 1080P 328FT/100M(MAX) over single Cat5e/6 10watts 200Wx115Dx30H(mm) 0.7KG

40 VIS-HS14 HDBaseT 1x4 Spliter Overview: To extend your HDMI signal in different remote area, the VIS-HS14 HDbaseT splitter is the best solution to achieve, without any signal loss, even it could receive the IR signal from the terminal by its Bi-directional IR/CEC pass through features. The spliter VIS-HS14 can work with the receiver VIS-HE7M-RX to get the video and achieve the control remotely up to 70m. Purchasing information HDBaseT to HDMI Receiver up to 70m-Model VIS-HE7M-RX HDBaseT 1x4 Spliter transmit up to 100m model no.vis-hs14h which work with 100m HDBaseT extender VIS-HE10H-RX Features Transmit 1 HDMI signal to 4 outputs separately to remote area via Cat5e/6 70 meter/100 meter two optional models. HDMI support 3D, resolution from 1080P to 4Kx2K, HDCP compliance Bi-directional IR/CEC pass through Output can pass the RS232 and Ethernet (VIS-HS14 Lite version doesn't feature it) Support TrueHD Dolby&DTS DTS-HD audio 40

41 System Diagram 41

42 Application Specification VIS-HS14 HDBaseT 1x4 Spliter Operating Temperature: - Operating Humidity: Video Bandwidth Video Format: Transmission Distance: Power Consumption: Dimension: Weight: 5 to +35 (+23 to +95 ) 5 to 90%RH (No Condensation) 300MHz/9Gbps 1080P@60Hz/4K& 3D video 1080P 230FT/70M(MAX) over single Cat5e/6 12watts 290Wx160Dx35H(mm) 1.4KG

43 VIS-HS18H HDBaseT 1x8 Spliter Overview: To extend your HDMI signal in different remote area, the VIS-HS1H HDbaseT splitter is the best solution to achieve, without any signal loss, even it could receive the IR signal from the terminal by its Bi-directional IR/CEC pass through features. The spliter VIS-HS18H can work with the receiver VIS-HE7M-RX to get the video and achieve the control remotely up to 100m. Purchasing information HDBaseT to HDMI Receiver up to 100m-Model VIS-HE10H-RX HDBaseT 1x8 Spliter up to 70m model no.vis-hs18 which work with 70m HDBaseT receiver VIS-HE7H-RX Features Transmit 1 HDMI signal to 8 outputs separately to remote area via Cat5e/6 70 meter/100 meter two optional models HDMI support 3D, resolution from 1080P to 4Kx2K, HDCP compliance 43

44 Bi-directional IR/CEC pass through Output can pass the RS232 and Ethernet (VIS-HS14 Lite version doesn't feature it) Support TrueHD Dolby&DTS DTS-HD audio System Diagram 44

45 Application Specification VIS-HS18H HDBaseT 1x8 Spliter Operating Temperature: - Operating Humidity: Video Bandwidth Video Format: Transmission Distance: Power Consumption: Dimension: Weight: 5 to +35 (+23 to +95 ) 5 to 90%RH (No Condensation) 300MHz/9Gbps 1080P@60Hz/4K& 3D video 1080P 328FT/100m(MAX) over single Cat5e/6 12watts 290Wx160Dx35H(mm) 2.4KG

46 VIS-HE7H HDBaseT extender for 70m with RS232 and IR Overview: The VIS-HE7H HDMI Extender over cat5e/cat6 is to extend the HDMI signal over long distances to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal and transmit by Cat5e/6 cable. It also transmit Bi-directional Infrared signal together with the HDMI signal, capable of controlling the source in the device side out to 70 meters, or from source to device, RS232 pass through makes it more convenient to be controlled. Features Allow HDMI signal and bi-directional IR&RS232 transmit up to 70 meter over Cat5e/6 cable HDMI signal from 1080P to 4Kx2K, 3D video format support, HDCP1.3,HDMI1.4,DVI1.0 compliance Ultra Light&thin case design for easy installing 46

47 System Diagram Application 47

48 Specification HDMI video interface Protocol support Pixel bandwidth Interface bandwidth Maximum resolutions Signal type IN/OUT interface Signal amplitude Min/Max Voltage Input impedance Dimensions Control interface Serial Baud IR control IR frequency Transmission Distance Power supply Maximum dissipation HDMI1.4, HDCP1.3,EDID MHz 10.2Gbps HDTV: BD: HDMI 1.4 / T.M.D.S. HDMI type A, female; HDBaseT T.M.D.S. +/- 0.4Vpp T.M.D.S. 2.9V/3.3V 100Ω 135mmX75mmX15mmm RS232 (3PIN 3.5mm ) bps IR (3.5MM) 38K Up to 100m by CAT5e/6 12V/5V DC 18W

49 VIS-HE10H HDBaseT extender for 100m with Ethernet&POE Overview: The VIS-HE10H HDMI Extender over cat5e/cat6 is to extend the HDMI signal over long distances to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal and transmit by Cat5e/6 cable. It also transmit Bi-directional Infrared signal together with the HDMI signal, capable of controlling the source in the device side out to 100 meters, or from source to device, RS232 pass through makes it more convenient to be controlled. Features Allow HDMI signal/ir transmit up to 100 meter over Cat5e/6 cable HDMI signal from 1080P to 4Kx2K, 3D video format support, HDCP compliance Support bidirectional Power Over Ethernet IR signal/rs232,cec pass through together with HDMI over Cat5e/6 cable bi-directionally for remote control Ethernet can be transmitted on output Ultra Light&thin case design for easy installing Support 802.3af compliant PoE (Power over Ethernet), Support standard 48V from Transmitter (PSE) to Receiver(PD) 49

50 System Diagram Smart TV VISSONIC VIS-PHD44 UHD4Kx2K HDMI 4x4 matrix HDBaseT with CAT5E/CAT6 Up to 100m VISSONIC VIS-HE10H-TX HDBaseT Transmitter IR HDMI Enthernet VISSONIC VIS-HE10H-RX HDBaseT Receiver Apply TV Set-Top Box 4K player RS232 IR IR IR IR Enthernet Enthernet VIDEO CONTROL VISSONIC VIS-NOVA700 Ethernet Control Unit Enthernet Router VISSONIC ipad control with VIS-ITD10 table dock HDBaseT Application

51 Specification HDMI video interface Protocol support Pixel bandwidth Interface bandwidth Maximum resolutions HDMI1.4, HDCP1.3,EDID MHz 10.2Gbps HDTV: BD: Signal type HDMI 1.4 / T.M.D.S. IN/OUT interface HDMI type A, female; HDBaseT Signal amplitude T.M.D.S. +/- 0.4Vpp Min/Max Voltage T.M.D.S. 2.9V/3.3V Input impedance 100Ω Dimensions 126mmX95mmX25mm Control interface Serial RS232 (3PIN 3.5mm ) Baud bps IR control IR (3.5MM) IR frequency 38K ETHERNET RJ45 Transmission Distance Up to 100m by CAT5e/6 Power supply 48V DC Maximum dissipation 5W(TX) 3W(RX) 51

52 VIS-HDS14 HDBaseT Receiver with 4 HDMI Out Overview: The VIS-HDS14 is the perfect solution for anyone who needs to receive HDBaseT signal of digital high definition video to four HDMI displays at the same time. It supports all HDMI-enabled equipment, such as DVD players, satellite set-top boxes and all HDMI displays. This Splitter supports extending uncompressed HDMI signals up to 1080p@60Hz, making it effective for use with all HDMI displays in home theater applications, as well as in corporate, educational and commercial settings. Features HDMI 1.4 compliance Send uncompressed HDMI signals up to 1080p@60Hz With up to 36 bits/pixel Deep Color Multi-format LPCM 7.1, Dolby True HD, Dolby digital plus, and DTS-HD Master audio By Cat5e/6 cable send up to 100 meters Uses IEEE-568B wiring standard for Cat5e/Cat6 cable 52

53 System Diagram Recommend Accessories: VIS-HE7H-TX HDBaseT transmitter to send the HDMI to the receiver VIS-HDS14 up to 100 meters. click for info Application 53

54 Specification VIS-HDS14 HDBaseT Receiver with 4 HDMI Out Input type HDBaseT Output type HDMI Video Protocol HDMI 1.4, HDCP 1.3, compliantto DVI1.0 Maximum resolution Up to HDMI interface Type A, 19 pin, female Input cable length Up to 100 meters with 1080P@60Hz Output cable length 15m Storage environment Temperature: -20 ~ +70, humidity: 10%~90% Work environment Temperature: -20 ~ +70, humidity: 10%~90% Power supply AC 110~240V Maximum power dissipation 10W Dimensions(WxDxH) 135mmX75mmX15mm Weight About 0.3Kg MTBF 30,000 hours Warranty One year warranty and lifetime maintenance