POWER SUPPLIES COAX DC INSERTERS SITUATION

Size: px

Start display at page:

Download "POWER SUPPLIES COAX DC INSERTERS SITUATION"

Myra Lane
5 years ago
Views:

SITUATION devices require voltage on the coax output connector and RF signals must pass from input to output on the power inserter.

Power originates from switching, short circuit protected transformers.

In some applications, filtering is required to prevent 22 khz or 2.3 from leaking in or out of the port.

......................... Ka/Ku Frequency Response.

couple power on coax cables to supply LNBs, line amplifiers and switches. COAX INSERTERS Dual Ground Screw Case:.

.......................... Regulated Output Voltage PS12250 PS121000A PS201200A APPLICATION P AT I NOTES HRFPI...single direction inserter.

1 SITUATION devices require voltage on the coax output connector and RF signals must pass from input to output on the power inserter. SOLUTION Sonora power inserters couple regulated voltage on coax cables while allowing the signal to pass through the inserter. Power originates from switching, short circuit protected transformers. RELATED CONSIDERATIONS can be inserted in one direction (HRFPI) or both directions (HRFPIB) on the coax. In some applications, filtering is required to prevent 22 khz or 2.3 from leaking in or out of the port. Models HRFPIX or HRFPIXB pass 22 khz on the RF ports and filter 22 khz and 2.3 from the ports. FEATURES E compatibility Ka/Ku Frequency Response to 2400 HRFPIB POWER SUPPLIES HRFPX4 PS2x8 HRFPI HRFPX2 DESCRIPTION HRFPIX 4SPI PS1x7 HRFPIXB Power inserters couple or de couple power on coax cables to supply LNBs, line amplifiers and switches. COAX INSERTERS Dual Ground Screw Case: Die cast RF shielded Switching Power Supplies:.... short circuit protected Regulated Output Voltage PS12250 PS121000A PS201200A APPLICATION P AT I NOTES HRFPI...single direction inserter HRFPIB... bidirectional inserter HRFPIX... inserter / extractor...22 khz HRFPIXB... bidirectional inserter / extractor...22 khz HRFPX2... dual extractor combiner khz & 2.3 filter HRFPX4... Quad extractor combiner khz & 2.3 filter 4SPI...(4) Coax inserter PS242000A PS2x8... Splitter...(2) F Inputs to (8) F Outputs PS1x7... Splitter...(1) F Input to (7) F Outputs PS Watt 12 V, 0.25 Amp PS121000A...12 Watt 12 V, 1.0 Amp PS201200A Watt 20 V, 1.2 Amp PS242000A Watt 24 V, 2.0 Amp

2 (1) COAX POWER INSERTER SINGLE DIRECTION 2 HRFPI Power Inserter Passes 1 to 2400, RF to RF+ Inserts to RF+ Port Blocks from RF+ to RF Port F-Female Connector for Input F-Female Connector for RF Input F-Female Connector for RF Output SAT1 +RF RF HRFPI PS A Parameter Unit HRFPI Frequency Range RF PORT RF+ PORT PORT Connectors (INPUT / PUT) RF + (INPUT) RF + (PUT) Loss RF+ to RF PORT passing SWM FSK (2.3 ) to to 2150 Rejection RF to FSK to to 2150 Return Loss RF+ PORTS FSK to to 2150 Power pass 1 to 2400, 1 to 2400 NO < 1.5 < 2.0 > 26 > 45 > 60 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

3 18V (1) COAX POWER INSERTER BI-DIRECTIONAL 3 HRFPIB Power Inserter Passes RF 1 to 2400 Inserts to both RF+ Ports Passes from RF+ to RF+ F-Female Connector for Input F-Female Connector for RF Input F-Female Connector for RF Output Legacy 4 FLEX1 FLEX2 SWM16 99º/101º 103º/110º/119º 18V 18V 18V 99º/101º 103º/110º/119º FLEX2 FLEX1 Legacy 4 FACE DOWN SWM16 SAT1 +RF RF HRFPI / PWR / PWR +RF +RF HRFPIB RF +RF HRFPIB PS A V Model HRFPIB combined with model PS242000A powers (2) SWM16 switches switches via the /PWR port. The total current draw at 24 volts is less than 1.5A. Model HRFPIB may be used with a voltmeter to measure the voltage on the coax while the load device is in operation. This is useful more measureing the voltage at the LNB after a long coax run. +RF +RF HRFPIB V Parameter Unit HRFPIB Frequency Range RF+ PORT RF+ PORT PORT Connectors (INPUT / PUT) RF + (INPUT) RF + (PUT) Loss RF+ to RF+ PORT passing SWM FSK (2.3 ) to to 2150 Rejection RF to FSK to to 2150 Return Loss RF+ PORTS FSK to to 2150 Power pass, 1 to 2400, 1 to 2400 YES < 1.5 < 2.0 < 2.0 > 26 > 45 > 60 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60 PS A

4 (1) COAX POWER XTRACTOR (1) PORT BLOCKING 4 HRFPIX Power Inserter / Extractor Passes 22 khz to 2400 from RF+ to RF port Extracts from RF+ Port Blocks from RF+ to RF port F-Female Connector for Port F-Female Connector for RF Port F-Female Connector for RF Port SL5 Legacy 4 1Out 2Out 18V Sat 99º / 101º HRFPIX DIRECTV 16 Channel SWM 18V/Hz /Hz Sat 103º/110º/119º SPLT-4-55 m SPLT-4-55 m SPLT-4-55 m SPLT-4-55 m PWR SWM1PWR -45 m (min) H24 RCVR SWM-FAN APT 1 HRFPIB SWM H25 HD SWM H25 HD SWM H25 HD SWM IN2 V IN1 LA142R HRFPIX SWM H25 HD HR24 DVR APT 2 APT 3 SWM H25 HD SWM H25 HD 2 V 1 2 HR24 DVR H25 HD HR24 DVR APT 4 2 BLOCK HR24 DVR HRFPIX 2 BLOCK Parameter Unit HRFPIX Frequency Range RF+ PORT RF+ PORT PORT Connectors (INPUT / PUT) RF + (INPUT) RF + (PUT) Loss RF+ to RF PORT passing DISEqC (22 khz) 22 khz impedance SWM FSK (2.3 ) to to 2150 Rejection RF to 22 khz 22 khz impedance FSK to to 2150 Return Loss RF+ PORTS 22 khz FSK to to 2150 Power pass ohm ohm 22 khz to khz to 2400 NO < 2 < 1.5 < 2.0 > 10k > 60 >12 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

5 (1) COAX POWER XTRACTOR BI-DIRECTIONAL 5 HRFPIXB Power Inserter / Extractor Passes 22 khz to 2400 RF+ to RF+ port Extracts from RF+ Ports Passes from RF+ to RF+ port F-Female Connector for Port F-Female Connector for RF+ Port 1 F-Female Connector for RF+ Port 2 HRFPIBX Model HRFPIXB may be used with a coax cables carrying and 22 khz signals. The port is isolated from the 22 khz signals to prevent 22 khz distortion. Model HRFPIXB may be used between switches and LNBs to extract the while passing the and 22 khz signals to the LNB. Parameter Unit HRFPIXB Frequency Range RF+ PORT RF+ PORT PORT Connectors (INPUT / PUT) RF + (INPUT) RF + (PUT) Loss RF+ to RF+ PORT passing DISEqC (22 khz) 22 khz Impedance SWM FSK (2.3 ) to to 2150 Rejection RF to 22 khz 22 khz Impednace FSK to to 2150 Return Loss RF+ PORTS 22 khz FSK to to 2150 Power pass ohm 0hm, 22 khz to 2400, 22 khz to 2400 Yes < 2 < 1.5 < 2.0 > 10 k > 60 >12 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

FLEX 1 FLEX 2 FLEX 1 FLEX 2 18V Sat 99º / 101º 18V Sat 99º / 101º 18V/Hz /Hz Sat 103º/110º/119º 18V/Hz /Hz Sat 103º/110º/119º (2) COAX POWER XTRACTOR & COMBINER 6 Legacy 4 1Out 2Out 18V Sat 99º /

6 FLEX 1 FLEX 2 FLEX 1 FLEX 2 18V Sat 99º / 101º 18V Sat 99º / 101º 18V/Hz /Hz Sat 103º/110º/119º 18V/Hz /Hz Sat 103º/110º/119º (2) COAX POWER XTRACTOR & COMBINER 6 Legacy 4 1Out 2Out 18V Sat 99º / 101º SL5 5SATPL HRFPX2 DIRECTV 16 Channel SWM 18V/Hz /Hz Sat 103º/110º/119º worlddirect Left Plate Legacy 4 1Out 2Out Legacy 4 1Out 2Out SWM-FAN DIRECTV 16 Channel SWM DIRECTV 16 Channel SWM PWR SWM1PWR PWR SWM1PWR PWR SWM1PWR HRFPX2 FAN120 SB5RP-PL32 BS HRvS4D BS HRFPX2 HRFPX2 RT Plate BS BS BS BS BS BS HRFPX2 Power Extractor Passes 22 khz to 2400 from RF to RF ports Extracts from RF 1 and RF 2 ports Combines from RF 1 and RF 2 ports Blocks 22 khz and 2.3 from Dual Green Ground Screws Parameter Unit HRFPX2 Frequency Range RF 1 PORT RF 2 PORT RF1 PORT RF2 PORT PORT Connectors (PUT) RF1 (PUT) RF2 (PUT) Loss RF+ to RF+ PORT passing DISEqC (22 khz) 22 khz Impedance SWM FSK (2.3 ) to to 2150 Rejection RF to 22 khz 22 khz Impedance FSK to to 2150 Return Loss RF+ PORTS 22 khz FSK to to 2150 Power pass ohm ohm, 22 khz to 2400, 22 khz to khz to khz to 2400, No RF (2) F-Female Yes < 2 < 1.5 < 2.0 < 2.5 > 2 k > 60 >12 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

FLEX 2 FLEX 2 FLEX 1 FLEX 1 13 V / 22 K 13 V / 22 K 18 V / 22 K 18 V / 22 K 13 V 13 V 18 V 18 V (4) COAX POWER XTRACTOR & COMBINER 7 HRFPX4 Power Extractor Passes 22 khz to 2400 from RF to RF ports

7 FLEX 2 FLEX 2 FLEX 1 FLEX 1 13 V / 22 K 13 V / 22 K 18 V / 22 K 18 V / 22 K 13 V 13 V 18 V 18 V (4) COAX POWER XTRACTOR & COMBINER 7 HRFPX4 Power Extractor Passes 22 khz to 2400 from RF to RF ports Extracts from RF 1,2,3,4 ports Combines from RF 1,2,3,4 ports Blocks 22 khz and 2.3 from Dual Ground Screws SWM-FAN HRFPX SL5 SWM32 HRFPX4 Parameter Unit HRFPX4 Frequency Range RF 1,2,3,4 PORTS RF1,2,3,4 PORT PORTS Connectors (PUT) RF (INPUT) RF (PUT) Loss RF+ to RF+ PORT passing DISEqC (22 khz) 22 khz Impedance SWM FSK (2.3 ) to to 2150 Rejection RF to 22 khz 22 khz Impedance FSK to to 2150 Return Loss RF+ PORTS 22 khz FSK to to 2150 Power pass ohm ohm, 22 khz to khz to 2400, No RF (2) F-Female (4) F-Female (4) F-Female Yes < 2 < 1.5 < 2.0 < 2.5 > 2 k > 60 >12 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

(4) COAX POWER INSERTER, SINGLE DIRECTION 8 4SPIv Power Inserter Passes 1 to 2400, RF to RF+ Inserts to (4) RF+ Ports Blocks 22 khz from RF to RF+ ports F-Female Connector for Input F-Female

8 (4) COAX POWER INSERTER, SINGLE DIRECTION 8 4SPIv Power Inserter Passes 1 to 2400, RF to RF+ Inserts to (4) RF+ Ports Blocks 22 khz from RF to RF+ ports F-Female Connector for Input F-Female Connector for RF Input F-Female Connector for RF Output SAT1 4SPIv SAT2 SAT3 SAT4 IN 1 IN 2 IN 3 IN 4 LA144R IN 1 IN 2 IN 3 IN 4 MST406 S SPI-20 PS Locks Powers Blocks Amplifies Switch TO RECEIVERS Switch TO RECEIVERS Switch TO RECEIVERS Switch TO RECEIVERS Parameter Unit 4SPIv Frequency Range RF PORTS (4) RF+ PORTS (4) PORTS (2) Connectors (INPUT / PUT) RF + (INPUT) RF (PUT) Loss RF+ to RF PORT passing SWM FSK (2.3 ) to to 2150 Rejection RF to FSK to to 2150 Return Loss RF+ PORTS FSK to to 2150 Power pass 1 to 2400, 1 to 2400 (2) F-Female (4) F-Female (4) F-Female YES < 1.5 < 2.0 > 26 > 45 > 60 > 13 > 11 Dc to (2) RF+ PORTS Amp 3 (max) Grounding Block (2) ea NEC gauge copper Dimensions L x W x H Inch 2.0 x 2.3 x 0.7 Environmental Indoor Only Operating Temperature ºC -34 to + 60

4SPI-20 TRUNK POWER INSERTER 9 Stacked LNB Power Inserter Features: Simplifies MDU installations by providing an integrated module for locking LNB polarizations and satellite selection Parameter UNIT

4 IN 1 IN 2 IN 3 IN 4 MST406 S 6 1 2 3 4 PS 24 2000A Locks Powers Blocks Amplifies Switch TO RECEIVERS 1 2 3 4 Switch TO RECEIVERS 1 2 3 4 Operating Frequency Range 250-2400 Insertion Loss 1.5 (max.

9 4SPI-20 TRUNK POWER INSERTER 9 Stacked LNB Power Inserter Features: Simplifies MDU installations by providing an integrated module for locking LNB polarizations and satellite selection Parameter UNIT 4SPI-20 4SPI-20 Trunk Power Inserter Powers (4) LNBs Regulated Voltages F-Connector Power Input Power LED Indicators Looped Output SAT1 SAT2 SAT3 SAT4 4SPI IN 1 IN 2 IN 3 IN 4 LA144R IN 1 IN 2 IN 3 IN 4 MST406 S PS A Locks Powers Blocks Amplifies Switch TO RECEIVERS Switch TO RECEIVERS Operating Frequency Range Insertion Loss 1.5 (max.) Flatness in frequency range ± 0.5 Number of Input Ports Each (4) F Number of Output Ports Each (4) F Isolation between ports Input / Output Return Loss > 12 (min) Power provided to inputs V Port #1 (20 V ) V 20 ± 0.5 Port #2 (20 V ) V 20 ± 0.5 Port #3 (20 V ) V 20 ± 0.5 Port #4 (20 V) V 20 ± 0.5 Number of LEDs Each 5 (1 per input & 1 for adaptor input) Power Path ma 1000 (max.) From Input to Input Power Connector Type Each (1) F Switching Mode Power Supply 24 V, 2 A (min) Short Circuit Protection Yes, Multi fuse Lightning Surge Protection 32 V p-p, max shunt current 200 A; 8 msec, 1.5 kw max dissipation Ground Screws Each (2) Ground Screw. Dimensions L x W x H mm 58 x 188 x 23 Environmental Requirements Indoor use only Operating Temperature range ºC -34 to + 60 Indoor housing Humidity Shall survive exposure to 95% relative humidity over operating temperature Switch TO RECEIVERS Switch TO RECEIVERS

(7) COAX POWER SPLITTER 10 PS1X7 7-Way Splitter F-Connector for Input F-Connector for Outputs PS1x7 Parameter UNIT PS1X7 Input Connectors Each (1) F Female Input Current A 5 max Outputs Each (7) F

10 (7) COAX POWER SPLITTER 10 PS1X7 7-Way Splitter F-Connector for Input F-Connector for Outputs PS1x7 Parameter UNIT PS1X7 Input Connectors Each (1) F Female Input Current A 5 max Outputs Each (7) F Female PS A PS1x7 Made in China Splitter A2SR0 A2SR0 A2SR0 A2SR0 Model PS1x7 is used with a large capacity power adaptor to power multiple A2R0 MoCA adaptors. The adaptors work over a range of voltages at a constant (3.1) watts. At 20 volts draws 155 ma. The model PS201200A power supply is capable of 1.2 Amps. If (7) adaptors were to be powered, the total current would be one Amp. At 24 volts draws 135 ma. The model PS242000A power supply is capable of 2.1 Amps. If (7) adaptors were to be powered, the total current would be 0.95 Amp.

(8) COAX POWER SPLITTER 11 PS2X8 Dual 4-Way Splitter F-Connector for (2) Inputs F-Connector for (8) Outputs Parameter UNIT PS2X8 Input Connectors Each (2) F Female Input Current A 5 max 1 Outputs

11 (8) COAX POWER SPLITTER 11 PS2X8 Dual 4-Way Splitter F-Connector for (2) Inputs F-Connector for (8) Outputs Parameter UNIT PS2X8 Input Connectors Each (2) F Female Input Current A 5 max 1 Outputs Each (4) F Female 2 Outputs Each (4) F Female PS A PS A HRF PIB P1 P2 PS2x8 PS PS A PS A P1 P2 PS2x8 PS SWM16 /PWR SWM16 Legacy 4 FLEX1 99º/101º 18V 18V 99º/101º 18V 18V /PWR FLEX2 103º/110º /119º 99º/101º 18V 18V SWM-FAN 99º/101º 18V 18V 99º/101º 18V 18V 99º/101º 18V 18V 99º/101º 18V 18V 99º/101º 18V 18V 99º/101º 18V 18V Model PS2X8 with (2) PS242000A power supplies provides 24 volts at 4 amps of current to up to (8) outputs. The current use per supply is (4) x 385 ma = 1.54 Amps. (4 x 9.25 W/ = 37W) (8) units in a box is equivalent to a 75 watt bulb. Model SWM-FAN provides airflow for lock boxes housing switches. Model HRFPIB is used to split the of one supply to power model SWM-FAN. (105 ma) SWM-FAN Legacy 4 FLEX1 FLEX2 Legacy 1 103º/110º /119º 99º/101º 18V 8V 2 /PWR Legacy 4 FLEX1 SWM16 FLEX2 103º/110º /119º 99º/101º 18V 18V Legacy 4 FLEX1 SWM16 /PWR FLEX2 103º/110º /119º 99º/101º 18V 18V Model SWM16 can be powered via the /PWR port. The current draw was measured at 29 and 24 volts: 29 V = 607 ma = 17.6 watts 24 V = 720 ma = 17.3 watts Powering (4) SWM16 switches draws 1.4 Amps from power supply. The current use for supply 2 is (2) x 720 ma ma (fan) = 1.5 Amps. NO SL5 powering is allowed with this configuration.

Solution: Model 4SATPL-T polarity locker generates one set of voltages and 22 khz tones while blocking the 22 khz signals generated by multiple switches.

12 POWER SUPPLIES 12 SWM to SL5 22 khz Communication Issue : Multiple SWM switches are sending 22 khz signals to the SL5. Some channels are missing. Multiple 22 khz signals when combined can create constructive and destructive interference. 180º out of phase combining will reduce the 22 khz signal to zero! Solution: Model 4SATPL-T polarity locker generates one set of voltages and 22 khz tones while blocking the 22 khz signals generated by multiple switches º/101º 18V 18V 99º/101º 18V 18V 99º/101º 18V 18V 103º/110º /119º 50 ft 100 ft 150 ft HRvS4 HRvS4 HRvS4 HRvS4 90º PHASE SHIFT 22 KHZ 28V, 1.5A PI-28 PI-28 PI-28 SL5 LNB POWERING 20.4 V º/101º 18V 18V 50 ft 100 ft 20.8 V 19.6 V IN PHASE 22 KHZ 4SATPL PS A 18 99º/101º 18V 18V 99º/101º 18V 18V 103º/110º /119º 150 ft 28V, 1.5A PI-28 PI-28 PI V 20 V 19.2 V 180º PHASE SHIFT 22 KHZ V V HRvS4 HRvS4 HRvS4 HRvS4

13 COAX POWER SUPPLY 13 PS V Power Supply 0.25 Amp UL Approved Small Footprint F-Connector for Output Overload Protection PS12250 Parameter UNIT PS12250 Rated Input Voltage Vac 100 to 240 Operating Input Range Vac 90 to 264 Rated Input Frequency Hz 47 to 63 Rated Input Current A 0.15 max No Load Input Current ma < 15 Maximum Input Power W 5.01 AC Input Connector Type US PIN Nominal Output Voltage Vdc 12 Rated load current A 0.25 max Minimum load current A 0.0 A Ripple & Noise mvp-p 100 Output Cable Feet 1 Switching Efficiency % 59 Power Connector Type Each (1) F Female Adaptor included Each (1) F71 Male to Male Short Circuit Protection Yes, Multi fuse Dimensions L x W x H mm 56 x 35 x 24 Environmental Requirements Indoor use only Ambient Temperature range ºC 0 to + 45 Humidity Shall survive 90% relative humidity over operating temperature Safety Ratings Agencies USA Canada Europe Japan Taiwan China Britain UL60950 CSA C22.2 NO.950 TUV/VDE-EN60950 J60950(H14)/J55001(H14) CNS13438 GB EN :2000

14 COAX POWER SUPPLY 14 PS121000A 12 V Power Supply 1 Amp UL Approved Interchangeable AC Cord F-Connector for Output Overload Protection Parameter UNIT PS121000A Rated Input Voltage Vac 100 to 240 Operating Input Range Vac 90 to 264 Rated Input Frequency Hz 47 to 63 Rated Input Current A 0.4 max No Load Input Current ma < 20 Maximum Input Power W AC Input Cable Feet 6 AC Input connector Mini 2 pin Nominal Output Voltage Vdc 12 Rated load current A 1 max Minimum load current A 0.05A Ripple & Noise mvp-p 120 Output Cable Feet 6 Switching Efficiency % 72 Power Connector Type Each (1) F Female Adaptor included Each (1) F71 Male to Male Short Circuit Protection Yes, Multi fuse Dimensions L x W x H mm 110 x 53 x 37 Environmental Requirements Indoor use only Ambient Temperature range ºC 0 to + 45 Humidity Shall survive 90% relative humidity over operating temperature Safety Ratings Agencies USA Canada Europe Japan Taiwan China Britain UL CSA C22.2 NO.950 TUV/VDE-EN J60950(H14)/J55001(H14) CNS13438 GB EN :2000

15 COAX POWER SUPPLY 15 PS201200A Power Supply 1.2 Amp UL Approved Universal AC cord, US standard F-Connector for Output Overload Protection Parameter UNIT PS201200A Rated Input Voltage Vac 100 to 240 Operating Input Range Vac 90 to 264 Rated Input Frequency Hz 47 to 63 Rated Input Current A 0.6 max No Load Input Current ma < 25 Maximum Input Power W AC Input connector 2 Conductor Cord, US PIN Nominal Output Voltage Vdc 20 Rated load current A 1.2 max Minimum load current A 0.0 Ripple & Noise mvp-p 150 Output Cable Feet 6 Switching Efficiency % 78.6 Power Connector Type Each (1) F Female Adaptor included Each (1) F71 Male to Male Short Circuit Protection Yes, Multi fuse Dimensions L x W x H mm 82 x 44 x 48 Environmental Requirements Indoor use only Ambient Temperature range ºC 0 to + 45 Humidity Shall survive 90% relative humidity over operating temperature Safety Ratings Agencies USA Canada Europe Japan Taiwan China Britain UL CSA C22.2 NO.950 TUV/VDE-EN60950 J60950(H14)/J55001(H14) CNS13438 GB EN :2004

16 COAX POWER SUPPLY 16 PS242000A Power Supply 2.08 Amp (50 Watt) UL Approved Interchangeable AC Cord F-Connector for Output Overload Protection Parameter UNIT PS242000A Rated Input Voltage Vac 100 to 240 Operating Input Range Vac 90 to 264 Rated Input Frequency Hz 47 to 63 Rated Input Current A 1.2 max No Load Input Current ma < 20 Maximum Input Power W 58.6 AC Input Cable Feet 6 AC Input connector Mini 2 pin Nominal Output Voltage Vdc 24 Rated load current A 2.08 max Minimum load current A 0.05A Ripple & Noise mvp-p 240 Switching Efficiency % 85 Output Cable Feet 6 Power Connector Type Each (1) F Female Adaptor included Each (1) F71 Male to Male Short Circuit Protection Yes, Multi fuse Dimensions L x W x H mm 110 x 53 x 37 Environmental Requirements Indoor use only Ambient Temperature range ºC 0 to + 45 Humidity Shall survive 90% relative humidity over operating temperature Safety Ratings Agencies USA Canada Europe Japan Taiwan China Britain UL CSA C22.2 NO.950 TUV/VDE-EN J60950(H14)/J55001(H14) CNS13438 GB EN :2000

POWER SUPPLIES COAX DC INSERTERS PS SPI. PS2x8 PS242000A SITUATION

POWER SUPPLIES COAX DC INSERTERS PS SPI. PS2x8 PS242000A SITUATION SITUATION DBS devices require DC voltages on the coax input or output connector and the RF signals must pass through the power inserter. SOLUTION Sonora power inserters couple regulated DC voltage on coax