Reference Manual. Notes 9/16 Series H

Size: px
Start display at page:

Download "Reference Manual. Notes 9/16 Series H"

Transcription

1 Reference Manual Notes 9/16 Series H

2

3 Copyright notice The information in this document is subject to change without prior notice and does not represent a commitment on the part of Q-MATIC AB. All efforts have been made to ensure the accuracy of this manual, but Q-MATIC AB can not assume any responsibility for any errors and their consequences. This manual is copyrighted and all rights are reserved. Qmatic, Qmatic Calendar, Qmatic Client Terminal, Qmatic Staff Basic and Qmatic Staff Advanced are registered trademarks or trademarks of Q-MATIC AB. Reproduction of any part of this Manual, in any form, is not allowed, unless written permission is given by Q-MATIC AB. COPYRIGHT 2013 Q-MATIC AB H Qmatic i

4 Notes 9 / 16 Series - Reference Manual ii Qmatic H

5 Contents Presentation... 1 Notes 9-series... 3 Notes 16-series... 5 Notes Display Types... 7 Notes Workstation display... 9 Notes Main display Settings Changing settings Factory default settings Mounting Notes displays Connection devices Cleaning of displays Fixing the Notes display to a wall Fixing the Notes display to the ceiling Hanging 2-4 displays from a ceiling, using a fixture plate Connecting a Buzzer Connecting Notes displays Cabling Power Consumption Technical description and Assembly Guidelines General Assembly Guidelines, 9-series Assembly Guidelines, 16-series H Qmatic iii

6 Notes 9 / 16 Series - Reference Manual Index...i iv Qmatic H

7 1. Presentation Topics in this chapter Notes 9-series... 3 Notes 16-series H Qmatic 1

8 Notes 9 / 16 Series - Reference Manual The Notes displays are LED matrix displays. There are two sets of Notes displays with different heights of the matrix. They are 9 or 16 pixels high. The LEDs are available in four colours: red, green, white and red-green (Two-coloured display). Notes 9-series is available in three LED widths and Notes 16-series in one width and both sets of Notes are available with or without signboard. The name of a Notes display is the height and the width of the matrix, for example a Notes 924 display is 9 pixels high and 24 pixels wide. The following table describes the Notes displays. All Notes are 20,5 mm thick. Table 1: Orchestra Notes Displays Set (height) Width (pixels) Name Size (mm) w x h LED area (mm) w x h Number of characters a x x (with signboard) 300 x x x x (with signboard) 300 x x x x (with signboard) 516 x x x x (with signboard) 516 x x a.the number of characters that can be shown on the Notes display depends on the used font. The values in the table are based on a font that is 6 pixels wide for the Notes 9-series and 10 pixels wide for the Notes 16-series. For the Notes displays, the same programming and script language that was used for previous displays, is used. Please refer to the Display Programming manual, found on the Partner Portal, for more information about display programming. 2 Qmatic H

9 Notes 9-series The Notes 9-series are the standard displays for languages that use a Latin alphabet (or similar) x 17 pixels. Colours and article numbers: Red Red with signboard White White with signboard Green Green with signboard x 24 pixels. Colours and article numbers: Red Red with signboard White White with signboard Green Green with signboard Red/Green Red/Green with signboard H Qmatic 3

10 Notes 9 / 16 Series - Reference Manual x 48 pixels. Colours and article numbers: Red Red with signboard White White with signboard Green Green with signboard Red/Green Red/Green with signboard Qmatic H

11 Notes 16-series The Notes 16-series are the standard displays for languages that use an alphabet with complex characters, for example Chinese, Japanese and Thai. The Notes 16-series displays can show more fonts and graphics than the Notes 9-series. It is, for example, possible to show a logotype. The text on the Notes 16-series can be bigger than the text on a Notes 9-series and it can also be shown in one or two lines. This makes the Notes 16-series display very useful as a main display, especially in larger waiting areas x 64 pixels. Colours and article numbers: Red Red with signboard White White with signboard Green Green with signboard Red/Green Red/Green with signboard H Qmatic 5

12 Notes 9 / 16 Series - Reference Manual 6 Qmatic H

13 2. Notes Display Types Topics in this chapter Notes Workstation display... 9 Notes Main display H Qmatic 7

14 Notes 9 / 16 Series - Reference Manual In an Orchestra, Ensemble, Solo Virtua, Duet Virtua, or Solo Linea system, there might be many different types of Notes displays, showing different types of information. The system settings specify the information shown on the displays. Each type of display has its own settings. An ID code identifies each Notes display. Each type of Notes has its own range of ID codes. In the settings you specify the ID code for the first Notes display in the display range. Notes displays only receive information; they do not transmit any information. This makes it possible for many Notes to have the same ID code. Notes with the same ID code will show exactly the same information. The only connection needed for a Notes display is the Qmatic serial communication (the Modular cable). The Notes will both communicate and get its power through this cable. Notes Workstation display The Notes workstation display is usually placed above the workstation. The display guides the customers to the workstations. Notes Main display The Notes main display informs the customers when a new ticket number is called. It shows the ticket number, the workstation number and the direction to the workstation. A bell connected to the main display ensures that the customers do not miss the call. 8 Qmatic H

15 Notes Workstation display The Notes workstation display is usually placed above the workstation. The display guides the customers to the workstations. The ticket number flashes on the Notes when a new customer is called. Text messages can be used to enhance the information, for example CLOSED when the workstation is closed. A signboard showing for example the workstation number can be integrated in the Notes display. A Notes workstation display. ID code The Notes workstation display uses the same ID code as the corresponding workstation. Default start ID code: H Qmatic 9

16 Notes 9 / 16 Series - Reference Manual Connection A modular cable connects the Notes workstation display to the Satellite Connection Box. The displays can be connected to any connectors on the Satellite Connection Box. The workstation number is specified by the ID code of the Notes not by the connector on the connection box. Depending on the system it may be necessary to connect a power supply to the Satellite Connection Box. The Satellite Connection Box is connected to the rest of the system with an EKKX 4 x 0.5 mm 2 cable. Do not connect wire 1 (+ 24V) to another power supply or ticket printer. 10 Qmatic H

17 Notes Main display The Notes main display informs the customers when a new ticket number is called. It shows the ticket number, the workstation number and the direction to the workstation. A bell connected to the Notes main display ensures that the customers do not miss the call. It is possible to combine two Notes to show two ticket numbers and workstation numbers at the same time or to show the ticket number and the workstation number on separate rows. The Notes main display is placed in the waiting area visible for all customers. A Notes main display with signboard. ID code Default start ID code: H Qmatic 11

18 Notes 9 / 16 Series - Reference Manual Connection A modular cable connects the Notes main displays to the Satellite Connection Box. The displays can be connected to any connectors on the Satellite Connection Box when there are no bells but they should be connected to Disp 1, Disp 2, etc. if the bell connectors (Bell 1, Bell 2, etc.) are used. Connectors "Disp 1" to "Disp 4" are connected to "Bell 1" to "Bell 4" respectively, on the terminal block in the Satellite Connection Box. This makes it possible to have four Notes main displays connected to four different bells. Also, the terminal block makes it possible for Notes main displays to share the same bell. This bell should be connected to Bell 1: 12 Qmatic H

19 Four displays sharing one bell. The Terminal block in the box: It is the ID code and not the Satellite Connection Box that specifies the Notes main display number. The numbering of the display connectors on the Satellite Connection Box (Disp 1, Disp 2, etc.) indicates the corresponding bell connectors (Bell 1, Bell 2, etc.) and not the Notes main display number. Make sure that the power supply you use works well together with the power consumption of your displays. For more information, see Power Consumption. The Satellite Connection Box is connected to the rest of the system with an EKKX 4 x 0.5 mm2 cable. Do not connect wire 1 (+ 24V) to another power supply or ticket printer H Qmatic 13

20 Notes 9 / 16 Series - Reference Manual 14 Qmatic H

21 3. Settings Topics in this chapter Changing settings...16 Factory default settings H Qmatic 15

22 Notes 9 / 16 Series - Reference Manual The settings give the Notes an identity, an ID code. All Notes showing different information must have different ID codes. Notes with the same ID code will show exactly the same information. The ID code also specifies the type of the display. All Notes display types (workstation display and main display) have their own range of ID codes. The ID code for the first Notes display of each type is specified in the system settings.. Workstation displays Information displays Main displays ID Codes ID code 1 ID code 65 ID code 81 Changing settings Use the button on the Notes display to change the settings. The button is placed on the left side of the display. To access the button, remove the side cover of the Notes display. No tools are needed for this, just pull the side off. Settings button 16 Qmatic H

23 Selecting setting Press the button to move between the different settings. The settings are shown on the Notes display. Release the button and wait about two seconds to see the current value of the setting. The following settings are available. ID ID Code SID Sub ID Code W Width of the Notes in pixels BSID ID Code for the font LED Test the Light Emitting Diodes (LED) Editing a setting Press the button until you reach the setting you want to change. Press the button to step between settings H Qmatic 17

24 Notes 9 / 16 Series - Reference Manual The setting is shown on the display. Release the button and wait until the current value is displayed (about two seconds). Press the button while the value is shown to change it step by step. If you keep the button pressed the value will continue to increase or decrease until you release the button. Stop when you reach the desired value. 18 Qmatic H

25 Release the button for a short while to change the direction of the counting. The setting is stored when ST is shown on the display. ID and Sub ID code The ID code and the Sub ID code of the Notes display. Width The width is usually correctly specified when the Notes display is delivered. The width must be specified if the display has been restored to factory default settings. The width is used in the name of the Notes display. For example, a 948 has width 48. BSID The broadcast sub ID code is used together with the broadcast ID code. These ID codes are used to send information to a wide range of units in the system. One example is when fonts are loaded into the Notes displays. All Notes should have the fonts, no matter which ID codes they have. This kind of information cannot be sent to the usual ID code because it is different for all units. Instead it is sent to the broadcast ID code. The broadcast ID code is the same for all units in the system and it cannot be changed H Qmatic 19

26 Notes 9 / 16 Series - Reference Manual The broadcast sub ID code (BSID) is a sub ID code for the broadcast ID code. Default BSID is 100. The broadcast ID code makes it possible to divide Notes into groups, for example if they are going to use different sets of fonts. The broadcast sub ID code is usually not changed. Notes with the same broadcast sub ID code will have the same set of fonts. The broadcast sub ID code that the system will use to upload fonts is specified in the font settings, in the settings section of the controlling system, such as Orchestra. LED test Use the LED test to check if all LEDs are working properly. All LEDs are turned on for a few seconds. All colours are tested on a multicoloured Notes display. To reduce the power consumption the LEDs are tested with 20% of the maximum intensity. Factory default settings All Notes displays have a set of basic settings that cannot be changed: the factory default settings. These settings can be used when a Notes display is not working properly. The factory default settings are the same for all display sizes so the display settings must be changed before the display is used. New settings must be specified when a Notes display has been restored to factory default settings. Do not forget to specify the width and the height of the display because these settings are also restored to a factory default value that may be different from the actual size of the display. Follow these steps to restore the Notes displays to the factory default. Disconnect the cable from the Notes display. Press the settings button and keep it pressed. Connect the cable to the Notes display. Release the button. The Notes display is restored to the factory default settings. 20 Qmatic H

27 4. Mounting Notes displays Topics in this chapter Connection devices...22 Cleaning of displays...28 Fixing the Notes display to a wall...28 Fixing the Notes display to the ceiling...29 Hanging 2-4 displays from a ceiling, using a fixture plate...33 Connecting a Buzzer H Qmatic 21

28 Notes 9 / 16 Series - Reference Manual Connection devices The connection devices must never be used in any other way than described in documentation from Qmatic. Never use the connection devices together with any other products than those described in this manual or other manuals or documents from Qmatic. Make sure that the Notes displays are firmly fixed to a surface that can withstand their weight even in cases of earthquake or other kind of disturbances. Incorrect use of the mounting devices may result in fatal danger for persons passing under the Notes displays. Beware of static electricity when handling the Notes displays and especially when removing the folio from the displays. Many of the connection devices below work together with both a 10 x 25 mm tube and a 15 x 25 mm tube, which means that they are backwards compatible. 22 Qmatic H

29 The following connection devices are available. Table 2: Connection devices Name Figure Description Art. No. Distance for wall mount Distance used when mounting Notes to wall. (4 pcs for each display). (40 pcs in each package) Display top bracket Bracket used when mounting Notes to the ceiling. Can be used both with a 10 x 25 and a 15 x 25 mm tube. (10 pcs of article number and 20 pcs of article number , in each package) Display stacking bracket Bracket used when stacking Notes displays. Can be used both with a 10 x 25 and a 15 x 25 mm tube. (10 pcs of article number and 40 pcs of article number , in each package) H Qmatic 23

30 Notes 9 / 16 Series - Reference Manual Table 2: Connection devices (Continued) Name Figure Description Art. No. Tube 1,1 m, 15 x 25 mm Tube used for mounting the Notes from the ceiling. Length 1100 mm. Mounting Lock and screw are included. Standard profile, available for purchase anywhere. (10 pcs in each package) Tube 1,1 m, 10 x 25 mm mm 25.00mm Tube used for mounting the Notes from the ceiling. Length 1100 mm. Mounting Lock and screw are included. Standard profile, available for purchase anywhere. (10 pcs in each package) Tube 90 mm for stacking with signboard, 15 x 25 mm Tube used when stacking Notes displays. Length 90 mm. Mounting Lock and screw are included. Standard profile, available for purchase anywhere. (10 pcs in each package) Qmatic H

31 Table 2: Connection devices (Continued) Name Figure Description Art. No. Display ceiling profile bracket Profile bracked used when mounting Notes to a fixed ceiling or for example a table. Note: Used only with the 15 x 25 mm tube Fixture for holes when mounting 2-4 displays Note: Used only with the 15 x 25 mm tube A Ceiling hole cover Hole cover, used when mounting Notes display to a ceiling. Note: Used only with the 15 x 25 mm tube. (10 pcs in each package) H Qmatic 25

32 Notes 9 / 16 Series - Reference Manual Table 2: Connection devices (Continued) Name Figure Description Art. No. Desk hole cover Hole cover, used when mounting a Notes display to a desk. Note: Used only with the 15 x 25 mm tube. (10 pcs in each package) Ceiling Rail Used to hang Notes displays from an acoustic ceiling. Used both with 10 x 25 mm and 15 x 25 mm tubes. However 15 x 25 mm tubes can only be used in the center hole A Clamp Used to hang Notes displays on the Acoustic Ceiling Hanging system. The screw is included. It can be used with both 10 x 25 mm and 15 x 25 mm tubes A Coverplate for 25 mm Tube 60 mm 48 mm Used to cover the holes in the acoustic ceiling. It is available in sets of 100. Note: Can only be used with the 10 x 25 tubes Qmatic H

33 Table 2: Connection devices (Continued) Name Figure Description Art. No. Fixed Ceiling Fastener 25 mm The Fixed Ceiling Fastener is used to attach the Notes displays to a fixed ceiling mm Used only together with the 10 x 25 mm tube. All screws are included (two for the ceiling and two for the tube). Buzzer A buzzer than can be mounted in the display H Qmatic 27

34 Notes 9 / 16 Series - Reference Manual Cleaning of displays Handle the Notes displays with care! Leave the protective folio/foam on as long as possible. Note that removing the folio may cause static electricity. After mounting of the display and removal of the folio, please use a soft microfibre screen cleaning cloth, or a mild detergent to remove any finger prints or dust from the display. To avoid scratches, make sure that the cloth is perfectly clean. Also, never use strong solvents or polishes on the display! Fixing the Notes display to a wall To mount the Notes display to a wall, start by removing the display cover center from the display and drilling a hole through the circle in the center (se figure below). This is where the cable will be placed. Fix the display cover center to the wall, using four suitable screws (not included) and four wall mounting distances (article number ). Note that if the wall mounting distances are not used, it will not be possible to slide the side covers of the display into place. Wall mounting distances Arrow symbol Hooks Drill hole for cable here. 28 Qmatic H

35 Make sure that the arrow symbol on the display cover center is facing upwards. When the cover center is mounted to the wall, hang the Notes display onto the four hooks on the cover center. Fixing the Notes display to the ceiling Fixing the Notes display to a tube To fix the Notes display to the ceiling, use a tube (both 25 x 10 mm and 25 x 15 mm are possible), connected to the display top bracket (article number ), using the included screw. Then, fix the display to the top bracket, using the included screws (article number ). To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. When using the 25 x 10 mm tube, make sure you press it all the way down to the bottom of the display top bracket. Tube (either 25 x 10 mm or 25 x 15 mm) Included screw Display top bracket Included screws Display top H Qmatic 29

36 Notes 9 / 16 Series - Reference Manual The finished result looks like this: The tube is 1100 mm long (article number or , depending on if it s 25 x 10 mm, or 25 x 15 mm). Hanging from an acoustic ceiling An acoustic ceiling is usually not firm enough to support hanging Notes displays. The Ceiling Rail is an aluminium profile that is placed on beams in the ceiling with clamps to hold the tubes of the Notes hanging from the profile. The Ceiling Rail is placed on beams in the ceiling. For this, it is possible to use both 25 x 10 mm and 25 x 15 mm tubes. However, the 25 x 15 mm tubes can only be used in the center hole. 30 Qmatic H

37 For heavy loads of Notes displays, use two profiles one on top of the other, like this: Use the clamp to hang the display tube on the profile. The above clamp can be used with both the 25 x 10 mm and the 25 x 15 mm tubes. Use Cover Plates to cover the holes in the acoustic ceiling. There are breaking holes in the profile so that the profile can be shortened to a suitable length. First, cut open the holes close to the edge with cutting pliers then break the profile. The same profile can be used for all Notes displays H Qmatic 31

38 Notes 9 / 16 Series - Reference Manual Hanging from a fixed ceiling The Fixed Ceiling Fastener is used if there is no acoustic ceiling. Two screws fix the Ceiling Fastener to the ceiling. Two other screws fix the 25 mm tube to the Ceiling Fastener. A A The Fixed Ceiling Fastener can only be used with the 10 x 25 mm tube. 32 Qmatic H

39 Hanging 2-4 displays from a ceiling, using a fixture plate It is possible to hang 2, 3 or 4 Notes displaýs back-to-back, in a square, or in a triangular formation, from an acoustic ceiling, using the ceiling fixture plate (article number A). This plate can only be used together with 15 x 25 mm tubes and together with clamps (article number A). To better be able to plan where and how to mount your displays, here you can see the measurements of the fixture plate: H Qmatic 33

40 Notes 9 / 16 Series - Reference Manual Naturally, any holes can be used for this, but below you can find a number of possible usages. Hanging the Notes displays in a square formation: Alternative a) (948 and 1664) Alternative b) (917 and 924) Hanging the Notes displays in a triangular formation: Alternative a) (948 and 1664) Alternative b) (917 and 924) 34 Qmatic H

41 Hanging two Notes displays back-to-back: Connecting a Buzzer It is possible to add a Buzzer to the Notes Displays, to make it easier for the customers to know when the displayed information is changed. The buzzer is mounted inside the display, using double-coated adhesive tape, as in the picture below. Connect the buzzer to the bottom connector H Qmatic 35

42 Notes 9 / 16 Series - Reference Manual 36 Qmatic H

43 5. Connecting Notes displays Topics in this chapter Cabling...38 Power Consumption H Qmatic 37

44 Notes 9 / 16 Series - Reference Manual Cabling All Notes displays use modular cables for both the power supply and the signal. Some Notes displays need an additional power supply cable. All cables must be placed inside the tubes and the displays. No cables should be visible from the outside of the display. The cables must be put through the tubes before the connectors are mounted on the cables. The placement of the cable through a tube The cables are always placed inside the tubes and the display top bracket or display stacking bracket, as in the picture below. 38 Qmatic H

45 The placement of the cable in a Display Cover Center. You need to drill through the circle in the middle of the display cover center, so that the cable can be pulled through and the display can be mounted. The following picture shows the placement of the cable in a display cover center. Naturallay, the cable can also be entered from the bottom, in a similar way. The cable is entered from the top H Qmatic 39

46 Notes 9 / 16 Series - Reference Manual Power Consumption The number of Notes displays that can be supplied with power through the same cable depends on the displays power consumption. The following table can be used as a guideline for calculating the number of Notes displays per cable. The current in each cable must never exceed 1 A during normal use. Never exceed the maximum allowed output power of the power supply connected to the Notes displays. The maximum allowed output power depends on the type of the power supply. The power supply must be dimensioned for the maximum power consumption (usually at LED test). The power consumption of the Notes display depends on the font, the number of shown characters and the used colour. This table is only a guideline. The power consumption of the Notes display when amber is used is about twice the value compared to green or red. The power consumption for amber may exceed the power consumption at LED test if, for example, graphical symbols are shown on the Notes display. Never use an inverted font on the whole Notes display. To turn on all LEDs or most of them at the same time may damage the display. The table specifies the number of characters shown at the display for the presented power consumption. The values for the Notes 16-series are when they show Japanese or Chinese characters. Table 3: Power consumption for Notes Notes Stand by A (W) Single colour A (W) Amber A (W) Max single colour All LED on A (W) 917 (3 characters) (1.6) 0.21 (5.5) N/A 0.42 (11) 924 (4 characters) (1.2) 0.24 (6.2) 0.44 (11) 0.60 (16) 948 (8 characters) (1.3) 0.44 (12) 0.84 (22) 1.2 (31) 1664 (4 characters) (1.3) 0.49 (13) 1.0 (26) 1.8 (47) 40 Qmatic H

47 Cable lengths The following tables should be used as guidelines when you plan an installation. The tables show the voltage at the Notes displays for different lengths of the cable. The voltage is measured at the Notes display when the specified numbers of characters are shown. The voltage at the Notes display must never be under 20 V during normal use and 15 V when a signal is sent to the external bell. The cable used in the table is the Qmatic Modular Cable. The power supply is placed close to the connection box. Only one Notes is connected to the Modular Cable. There are two cases where the Notes displays must be connected to two Modular Cables. 1 The current to the Notes display is above 1A. 2 The voltage drops below 20 V because of the power loss in the cable. The selected font and the text shown on the Notes display affect the power consumption of the Notes display. The tables must not be used as exact values that you can use in your installation, only as a guideline to help you calculate the numbers of cables you need and the maximum length of the cables. Display The Notes display type. Characters Single Colour The number of characters in one colour (red or green) that are shown on the Notes display. Characters Amber The number of characters using amber (amber = green + red) that are shown on the Notes display. Bell An "x" indicates that an external bell is connected to the Notes display H Qmatic 41

48 Notes 9 / 16 Series - Reference Manual 40m, 30m, 20m, 10m, 1m The length of the Modular Cable. The table shows the voltage at the connector of the Notes display. This voltage must never be below 20 V during normal use or 15 V when there is a signal to the external bell. The value is measured when only one Notes display is connected to the same cable. The use of other cables or other power supplies may result in other values. In such cases we recommend that you measure the voltage at the Notes display connector to make sure that they get enough voltage. 42 Qmatic H

49 Connecting two power supply cables Some Notes displays (see the table above) need two cables for power supply. The second cable should only be connected to the power supply not to the signals. It is possible to use a CS1702 Y 2/1 box for this: Two power cables connected to one Notes display H Qmatic 43

50 Notes 9 / 16 Series - Reference Manual Cable running through two stacked Notes displays. Two power supplies connected to one Notes display Some Notes displays require more power than can be supplied by one power supply. Two or more units can be parallel connected if more power is needed. 44 Qmatic H

51 6. Technical description and Assembly Guidelines Topics in this chapter General...46 Assembly Guidelines, 9-series...47 Assembly Guidelines, 16-series H Qmatic 45

52 Notes 9 / 16 Series - Reference Manual General Technical data for all Notes Displays. Voltage 24 V DC. Colour of the LEDs 924, 948 and 1664 available with: red, green, white and red-green. 917 available with red, green and white. Background colour Black. Operating temperatures C. Storage temperature C. Operating humidity 15-85% Relative humidity. Storage humidity 10-90% Relative humidity. Connectors Q-MATIC Seriall I/O: Wire V Wire 2 GND Wire 3 Signal in Wire 4 Not in use Wire 5 External bell Wire 6 Not in use 46 Qmatic H

53 Assembly Guidelines, 9-series Handle the Notes displays with care! After assembly, if needed, clean the Notes display, according to the guidelines in Cleaning of displays on page 28. Before you follow the Assembly Guidelines below, please make sure you are familiar with the instructions in Fixing the Notes display to a wall on page 28 (for Notes that are to be fixed to a wall) and Fixing the Notes display to the ceiling on page 29 (for Notes that are to be hung from the ceiling). Make sure you have decided how to place the cable before you start with the procedures below. For more information, see The placement of the cable through a tube on page 38 and The placement of the cable in a Display Cover Center. 917, with signboard H Qmatic 47

54 Notes 9 / 16 Series - Reference Manual Table 4: Parts, 917 Position Part Article Number 1 Display cover, left and right Part of Notes display cover, with article number Display cover center Part of Notes display cover, with article number Display cover top and bottom Part of Notes display cover, with article number Display plate kit: Display plate, short; heat pad; PBA 917 and reflector glass. Part of Notes 917 with signboard : (red), (green), (white) To assemble a Notes 917, follow the procedure below. The numbers in the procedure refer to the position numbers in the table. 1. Mount Display cover, top and bottom (3) to Display cover center (2). Make sure that the hinge of the display cover, top and bottom, snaps into place properly in the display cover center. 2. Mount this (3 together with 2) to Display plate kit (4). 3. Finally, mount Display cover, left and right (1). To disassemble the Notes simply follow the steps in reverse, making sure you pull the Display cover center (2) in the right direction. 48 Qmatic H

55 924, with signboard, hanging from ceiling This instruction applies to any Notes that is to be hung from a ceiling H Qmatic 49

56 Notes 9 / 16 Series - Reference Manual Table 5: Spare 924 Position Part Article Number 1 Display cover, left and right Part of Notes display cover with article number Display cover, center Part of Notes display cover with article number Display cover, bottom (top not used in this case) 4 Display plate kit: Display plate, short; heat pad; PBA 924 and reflector glass. 5 Display top bracket Tube 25 x 15 mm (25 x 10 mm is also possible) To assemble a Notes 924 in such a way that it can be hung from the ceiling, follow the procedure below. The numbers in the procedure refer to the position numbers in the table. 1. Using Screws (7). mount Display top bracket (5) to Display plate kit (4). Part of Notes display cover with article number Part of Notes 924 with signboard : (red), (green), (white) and red/green / Screws Part of Display top bracket with article number , position 5 in this table. To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. 2. Mount Display cover, bottom (3) to Display cover center (2). Make sure that the hinge of the display cover, top and bottom, snaps into place properly in the display cover center. 3. Mount this (3 together with 2) to Display plate kit (4), after having fixed the plate to the glass again. 50 Qmatic H

57 4. Fasten Display top bracket (5) to tube (6). If the 25 x 10 mm tube is used, make sure it hits the bottom of the diplay top bracket! 5. Finally, mount Display cover, left and right (1). To disassemble the Notes simply follow the steps in reverse, making sure you pull the Display cover center (2) in the right direction. For more information, see Fixing the Notes display to the ceiling on page 29. Stacked, with signboard H Qmatic 51

58 Notes 9 / 16 Series - Reference Manual Table 6: Parts, stacked with signboard Position Part Article Number 1 Display top bracket Tube 90 mm (15 x 25 mm) Screws Part of Display top bracket with article number , position 1 in this table. This instruction applies to any Notes with signboards that are to be stacked. With two Notes displays, (see 917, with signboard on page 47, or 1664, with signboard on page 57) at hand, follow the procedure below to stack them together. The numbers in the procedure refer to the position numbers in the table. 1. Remove the Display cover bottom from the Notes that is to hang at the top. 2. Mount the Display top bracket (1) to the top display, using the included screws (3). To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. 3. Fix the tube (2) to the Display top bracket (1), using the included screw. If a 10 x 25 mm tube is used, make sure it goes all the way to the bottom! 4. Fix the second Display top bracket (1) to the tube (2), using the included screw. If a 10 x 25 mm tube is used, make sure it goes all the way to the bottom! 5. Remove the Display cover top from the Notes that is to hang at the bottom. 6. Mount the Display top bracket (1) to the bottom display, using the the included screws (3). To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. 7. Finally, make sure that Display cover, left and right are properly mounted to both the displays. To disassemble the stacked Notes simply follow the steps in reverse. 52 Qmatic H

59 Stacked, without signboard H Qmatic 53

60 Notes 9 / 16 Series - Reference Manual Table 7: Parts, stacked without signboard Position Part Article Number 1 Display stacking bracket Screws Part of Display stacking bracket with article number , position 1 in this table. This instruction applies to any Notes without signboard, that are to be stacked. With two Notes displays, (see 948, without signboard on page 55) at hand, follow the procedure below to stack them together. The numbers in the procedure refer to the position numbers in the table. 1. Remove the Display cover bottom from the Notes that is to hang at the top. Mount the Display stacking bracket (1) here instead, using the included screws (2). To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. 2. Remove the Display cover top from the Notes that is to hang at the bottom. Mount the Display stacking bracket (1) here instead, using the the included screws (2). To be able to fix the display top bracket to the display top, you first need to remove the display plate from the glass, so that the screw holes are accessible. 3. Finally, make sure that Display cover, left and right are properly mounted to both the displays. To disassemble the stacked Notes simply follow the steps in reverse. 54 Qmatic H

61 948, without signboard Position Table 8: Parts, 948 Part Article Number 1 Display cover, left and right Part of Notes display cover with article number Display cover center Part of Notes display cover with article number Display cover, top and bottom Part of Notes display cover with article number H Qmatic 55

62 Notes 9 / 16 Series - Reference Manual Table 8: Parts, 948 (Continued) Position Part Article Number 4 Display plate kit: Display plate, long; heat pad; PBA 924; PBA 924 Slave and reflector glass. Part of Notes 948 without signboard : (red), (green), (white) and (red/green) To assemble a Notes 948, follow the procedure below. The numbers in the procedure refer to the position numbers in the table. 1. Mount Display cover, top and bottom (3) to Display cover center (2). Make sure that the hinge of the display cover, top and bottom, snaps into place properly in the display cover center. 2. Mount this (3 together with 2) to Display plate kit (4). 3. Finally, mount Display cover, left and right (1). To disassemble the Notes simply follow the steps in reverse, making sure you pull the Display cover center (2) in the right direction. Assembly Guidelines, 16-series Handle the Notes displays with care! After assembly, if needed, clean the Notes display, according to the guidelines in Cleaning of displays on page 28. Before you follow the Assembly Guidelines below, please make sure you are familiar with the instructions in Fixing the Notes display to a wall on page 28 (for Notes that are to be fixed to a wall) and Fixing the Notes display to the ceiling on page 29 (for Notes that are to be hung from the ceiling). Make sure you have decided how to place the cable before you start with the procedures below. For more information, see The placement of the cable through a tube on page Qmatic H

63 1664, with signboard H Qmatic 57

64 Notes 9 / 16 Series - Reference Manual Table 9: Parts, 1664, with signboard Position Part Article Number 1 Display cover, left and right Part of Notes display cover with article number Display cover center Part of Notes display cover with article number Display cover, top and bottom Part of Notes display cover with article number Display plate kit: Display plate long; heat pad; PBA 1664; PBA 1664 Slave and reflector glass Part of Notes 1664 with signboard : (red), (green), (white) and (red/green) To assemble a Notes 1664, follow the procedure below. The numbers in the procedure refer to the position numbers in the table. 1. Mount Display cover, top and bottom (3) to Display cover center (2). Make sure that the hinge of the display cover, top and bottom, snaps into place properly in the display cover center. 2. Mount this (3 together with 2) to Display plate kit (4). 3. Finally, mount Display cover, left and right (1). To disassemble the Notes simply follow the steps in reverse, making sure you pull the Display cover center (2) in the right direction. 58 Qmatic H

65 7. Index Numerics A acoustic ceiling 30 B BSID 17, 19 Buzzer 27 C cable lengths 41 connection devices 23 connectors 46 Coverplate 26 E edit a setting 17 F factory default settings 20 fixed ceiling 32 Fixed Ceiling Fastener 27, 32 H humidity 46 I ID 17 ID code 9, 11, 16 ID codes 8 L LED 17 LED test H Qmatic i

66 Notes 9 / 16 Series - Reference Manual M main display 8, 11 O operating humidity 46 operating temperatures 46 P power consumption 40 S select setting 17 SID 17 Spare parts 47, 49 spare parts 47 storage humidity 46 storage temperature 46 T temperatures 46 Triangle System Wall Bracket 29, 33, 35 W W 17 workstation display 8, 9 ii Qmatic H

67

68 Q-MATIC AB, Box 198, SE Mölndal, Sweden. VAT No SE Phone: Fax: Web:

LINK-RAY TM MODULATORS FOR CONSTANT- VOLTAGE. LinkRay Modulators 12 V / 24 V Constant-voltage Applications MODULATORS

LINK-RAY TM MODULATORS FOR CONSTANT- VOLTAGE. LinkRay Modulators 12 V / 24 V Constant-voltage Applications MODULATORS MUSIUM RESTAURANT SOUVENIR SHOP EXIT LinkRay Modulators 12 V / 24 V Constant-voltage Applications LINK-RAY TM MODULATORS FOR CONSTANT- VOLTAGE LINK-RAY TM MODULATORS FOR CONSTANT-VOLTAGE APPLICATIONS 186755

More information

PIXEL TOUCH PCB KEEP THIS MANUAL FOR FUTURE NEEDS

PIXEL TOUCH PCB KEEP THIS MANUAL FOR FUTURE NEEDS KEEP THIS MANUAL FOR FUTURE NEEDS Indoor Fixtures Dimensions System Max. in Chain Cabling System Control Pixels Pixel Pitch DMX Channels Addressing DMX Power requirements Current Consumption Light Source

More information

Caution. Hanging the Screen:

Caution. Hanging the Screen: Installation Instructions for Laminar and Laminar XL Projection Screens Caution 1. Read Instructions through completely before proceeding; keep them for future reference. Follow these instructions carefully.

More information

imac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement

imac Intel 20 EMC 2133 and 2210 LCD Backlights (CCFL) Replacement imac Intel 20" EMC 2133 and 2210 LCD Backlights (CCFL) Replacement The CCFL back lights are replaceable. I have pulled mine apart and documented my method. '''NOTE''' This is not for the feint hearted!

More information

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM Content 1. General 5 2. The products of NC-1000 system 6 3. Mounting of the frame 8 4. Earthing of the frame 8 NC-1000 FIBRE OPTIC

More information

Video Server SED-2100R/S. Quick Installation Guide

Video Server SED-2100R/S. Quick Installation Guide Video Server SED-2100R/S Quick Installation Guide Feb.10,2006 1 1 Getting Started 1.1 PACKAGE CONTENTS SED-2100 Warranty Card Software CD Hook up & Screws Terminal Blocks for Power & DI/O Power Adaptor

More information

Hip Hop Activity Box. Instruction Manual. Hip Hop Activity Box 22875, October 2018 Copyright ROMPA Ltd

Hip Hop Activity Box. Instruction Manual. Hip Hop Activity Box 22875, October 2018 Copyright ROMPA Ltd Hip Hop Activity Box Instruction Manual Hip Hop Activity Box 22875, October 2018 Copyright ROMPA Ltd Contents 3 Panel Overview 5 Colour 5 Description 5 Technical Specification 6 Dimensions 7 Contents 8

More information

PXL2470MW LED LCD Monitor

PXL2470MW LED LCD Monitor PXL2470MW LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Unpacking Instructions...2 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5

More information

In-Ceiling Electric Motorized Front Projection Screen Evanesce Series. User s Guide

In-Ceiling Electric Motorized Front Projection Screen Evanesce Series. User s Guide In-Ceiling Electric Motorized Front Projection Screen Evanesce Series User s Guide Important Safety & Warning Precautions Make sure to read this user s guide and follow the procedures below. Caution: The

More information

INSTRUCTION MANUAL [J] [E] [C] [G] [B] [I] [H] [D] [F] [A] 0 INTRODUCTION 1 RECOMMENDATIONS 2 ACCESSORIES INCLUDED

INSTRUCTION MANUAL [J] [E] [C] [G] [B] [I] [H] [D] [F] [A] 0 INTRODUCTION 1 RECOMMENDATIONS 2 ACCESSORIES INCLUDED 0 INTRODUCTION Video Lift is an electro-mechanical device which, once installed in the ceiling, allows vertical movement (ceiling floor ceiling) for loads of up to 19 Kg and with maximum runs of 1 metre

More information

LM/TM-30xx, 31xx Series LCD Monitor User s Manual Rev. A0

LM/TM-30xx, 31xx Series LCD Monitor User s Manual Rev. A0 LM/TM-30xx, 31xx Series LCD Monitor User s Manual Rev. A0 FCC NOTICE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions

More information

Model: S-4904T/R. Wireless HD Transmission System. User Manual. Please read this User Manual throughout before using.

Model: S-4904T/R. Wireless HD Transmission System. User Manual. Please read this User Manual throughout before using. Model: S-4904T/R Wireless HD Transmission System User Manual Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please read this user manual

More information

PRJTPFL inch PRJTPFL inch PRJTPFL inch. Fixed Wall Mount Projector Screen. Universal Home/Office Projector Viewing Display

PRJTPFL inch PRJTPFL inch PRJTPFL inch. Fixed Wall Mount Projector Screen. Universal Home/Office Projector Viewing Display PRJTPFL102-100 - inch PRJTPFL112-110 - inch PRJTPFL122-120 - inch Fixed Wall Mount Projector Screen Universal Home/Office Projector Viewing Display Be sure to read this manual before use so you will know

More information

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL

Model DT-311J. And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Model DT-311J And DT-311J-230V(AC) DIGITAL STROBOSCOPE INSTRUCTION MANUAL 1. GENERAL The DT-311J DIGITAL

More information

1440/2880 HP RGB+WW+CW

1440/2880 HP RGB+WW+CW office Nano*Pix 1440/2880 HP RGB+WW+CW User Manual Rev 7/2014 V4.4 Specifications subject to change without notice. Seite 1 Product Description Thank you for choosing this LDDE Nano*Pix 1440 HP / 2880

More information

NEO-STB-0004 Neo-Flash 300 RGB User Manual

NEO-STB-0004 Neo-Flash 300 RGB User Manual NEO-STB-0004 Neo-Flash 300 RGB User Manual Introduction Thank you for investing in our Neo-Flash series. The Neo-Flash 50 RGB features 132 high power SMD 5050 s and is a compact, yet powerful strobe fixture

More information

19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43

19 TiRAX cabinet system. from page 3. 19 NETcell cabinet system from page 31. Open 19 racks from page 43 19" TiRAX cabinet system from page 3 19" NETcell cabinet system from page 31 Open 19" racks from page 43 all-mounting/stand-alone distribution systems from page 53 all-mounting enclosure systems from page

More information

Business Display Solutions - Institutional Television Mirror TV. Installation Guide for 32PM8822 ( BDL3221M) 42PM8822 (BDL4221M)

Business Display Solutions - Institutional Television Mirror TV. Installation Guide for 32PM8822 ( BDL3221M) 42PM8822 (BDL4221M) Business Display Solutions - Institutional Television P.O. Box 218, 5600 MD Eindhoven, The Netherlands 32-42 Mirror TV Installation Guide for 32PM8822 ( BDL3221M) 42PM8822 (BDL4221M) Date: October 2005

More information

PLL2710W LED LCD Monitor

PLL2710W LED LCD Monitor PLL2710W LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5 Rear View of the Product...6

More information

apple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April Apple Computer, Inc. All rights reserved.

apple Service Source Apple Cinema HD Display 23 LCD (ADC) 11 April Apple Computer, Inc. All rights reserved. apple Service Source Apple Cinema HD Display 23" LCD (ADC) 11 April 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart Apple Cinema HD Display 23" LCD (ADC) 2003 Apple

More information

Model: S-1071H 7" Broadcast On-camera 3GSDI&HDMI LCD Monitor. User Manual. Please read this User Manual throughout before using.

Model: S-1071H 7 Broadcast On-camera 3GSDI&HDMI LCD Monitor. User Manual. Please read this User Manual throughout before using. Model: S-1071H 7" Broadcast On-camera 3GSDI&HDMI LCD Monitor User Manual Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please read this

More information

SquareLED - Aura Bar & Matrix Beam Light 100

SquareLED - Aura Bar & Matrix Beam Light 100 SquareLED - Aura Bar & Matrix Beam Light 100 1. SAFETY INSTRUCTIONS Please read these instructions carefully they include the important information about the installation usage and maintenance of this

More information

22" Touchscreen LED Monitor USER'S GUIDE

22 Touchscreen LED Monitor USER'S GUIDE 22" Touchscreen LED Monitor USER'S GUIDE Content Operation Instructions...1 Unpacking Instructions...2 Safety Precautions...2 Front View of the Product...3 Rear View of the Product...4 Quick Installation...5

More information

INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN

INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN INSTRUCTION AND MAINTENANCE VIDEO MOTORE PROJECTION SCREEN 1.1 TECHNICAL DATA PRODUCT DESCRIPTION Screens made with the following projection fabrics: SOFT WHITE, MATT WHITE SOFT, SOFT WHITE TRANSOUND,

More information

RADIO RECEIVER RGBW CONTROLLING LED STRIP COMMON ANODE

RADIO RECEIVER RGBW CONTROLLING LED STRIP COMMON ANODE TELECO AUTOMATION SRL - Via dell Artigianato, 16-31014 Colle Umberto (TV) ITALY TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com This document is the property of Teleco Automation

More information

PLL2210MW LED Monitor

PLL2210MW LED Monitor PLL2210MW LED Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Quick Installation...6

More information

8000 Plus Series Safety Light Curtain Installation Sheet ( CD206A/ CD206B )

8000 Plus Series Safety Light Curtain Installation Sheet ( CD206A/ CD206B ) SMARTSCAN 8000 PLUS LIGHT CURTAIN 1 Unpacking 8000 Plus Series Safety Light Curtain Installation Sheet ( CD206A/0160306 CD206B160306 ) Remove all packaging material and retain it Locate and keep the delivery

More information

PT1500MX / PT1550MX PT1555MU / PT1505MU Touch Screen LCD Monitors

PT1500MX / PT1550MX PT1555MU / PT1505MU Touch Screen LCD Monitors PT1500MX / PT1550MX PT1555MU / PT1505MU Touch Screen LCD Monitors USER S GUIDE www.planar.com Important Recycle Instructions: Lamp(s) inside this product contains mercury. This product may contain other

More information

Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door

Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door CHAPTER 8 Assembling and Mounting the Presentation Display, Speakers, Speaker Screens, and Table Door July 13, 2012, This document provides you with the procedures you perform to assemble and mount the

More information

SINGLE ZONE CLIMATE ZONING SYSTEM. Technical Manual. Polyaire Pty Ltd

SINGLE ZONE CLIMATE ZONING SYSTEM. Technical Manual. Polyaire Pty Ltd SINGLE ZONE CLIMATE ZONING SYSTEM Technical Manual Polyaire Pty Ltd 11-13 White Road GEPPS CROSS South Australia, 5094 Tel: (08) 8349 8466 Fax: (08) 8349 8446 www.polyaire.com.au CONTENTS Features 1 Application

More information

PLL1920M LED LCD Monitor

PLL1920M LED LCD Monitor PLL1920M LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Installation...6

More information

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any MRV366 Receiving Card Document Version: Document Number: V1.0.1 NS110100658 Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted

More information

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any

Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any Receiving Card MRV328 Document Version: Document Number: V1.0.0 NS110100409 Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted

More information

Contact-Type Digital Displacement Sensor. HG-S Series. User's Manual WUME-HGS panasonic.net/id/pidsx/global

Contact-Type Digital Displacement Sensor. HG-S Series. User's Manual WUME-HGS panasonic.net/id/pidsx/global Contact-Type Digital Displacement Sensor HG-S Series User's Manual WUME-HGS-4 2017.1 panasonic.net/id/pidsx/global (MEMO) 2 Panasonic Industrial Devices SUNX Co., Ltd. 2017 Thank you for purchasing an

More information

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes

3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx Preparing drop cable with micro-tubes FIST-GCOG2-Dx24 I N S T A L L A T I O N I N S T R U C T I O N FTTH closure for micro-tubes and micro-cables Content 1 Introduction 2 Kit content 3 Closure preparation 3.1 Work-stand 3.2. Opening FIST-GCOG2-Dx24

More information

2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table

2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table FIST-GCO2-F INSTALLATION INSTRUCTION GCO2-FC GCO2-FD Content 1 Introduction 2 General 2.1 Kit Contents 2.2 Elements needed from the FIST installation kit 2.3 Tools 2.4 Cable preparation table 3 Installation

More information

MY-HITE ADJUSTABLE TABLE

MY-HITE ADJUSTABLE TABLE MY-HITE ADJUSTABLE TABLE Corner T Leg Base Model Number : FCNAHBT Please Read Instructions Before Use ASSEMBLY INSTRUCTIONS ALL WORKSTYLES WELCOME Thank you for choosing Friant. We appreciate the trust

More information

MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION

MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION MAGNETIC CARD READER DESIGN KIT TECHNICAL SPECIFICATION Part Number: D99821002 Rev 212 MAY 2017 REGISTERED TO ISO 9001:2008 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301

More information

Specifications. Mechanical Information. Mass (grams) Dimensions (mm) 15 x 75 Housing. Anodised Aluminium Isolated Body

Specifications. Mechanical Information. Mass (grams) Dimensions (mm) 15 x 75 Housing. Anodised Aluminium Isolated Body Beta TX Datasheet Beta-TX The Beta-TX is a complete self contained laser diode system which can operate in both CW and modulation modes. The Beta- TX features high speed modulation with a bandwidth of

More information

LED Thunder S-150 Code 1097

LED Thunder S-150 Code 1097 LED Thunder S-150 Code 1097 User Manual 1 1 SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely

More information

ivw-fd122 Video Wall Controller MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Page i Rev. 1.

ivw-fd122 Video Wall Controller MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Page i Rev. 1. MODEL: ivw-fd122 Video Wall Controller Supports 2 x 2 Video Wall Array User Manual Rev. 1.01 Page i Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice

More information

Fully ly Automaticti. Motorised Satellite t TV System. User s manual REV

Fully ly Automaticti. Motorised Satellite t TV System. User s manual REV REV. 1.0 Fully ly Automaticti Motorised Satellite t TV System User s manual Customer Help Line: 1300 139 255 Support Email: support@satkingpromax.com.au Website: www.satkingpromax.com.au www.satkingpromax.com.au

More information

User Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor

User Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor Touch Display LCD Monitor User Manual Installation Guide 15 Resistive Touch LCD Monitor MODEL: KK1500-TR i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com User

More information

LA1500R USER S GUIDE.

LA1500R USER S GUIDE. LA1500R USER S GUIDE www.planar.com The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights

More information

sequenza 1000/1250 al manuale di istruzioni instruction manual 1^ edizione, ottobre st edition october 1996

sequenza 1000/1250 al manuale di istruzioni instruction manual 1^ edizione, ottobre st edition october 1996 manuale di istruzioni instruction manual 1^ edizione, ottobre 1996 1st edition october 1996 sequenza 1000/1250 al sequenza 1 1000/1250al cod. 5092 sequenza 1000/1250 al/s cod. 5093 sequenza 1000/1250 al/a

More information

Tube Roller Shakers. User Guide. Version 1.2

Tube Roller Shakers. User Guide. Version 1.2 Tube Roller Shakers User Guide Version 1.2 Control panel Rollers Side retaining panels Analog models LED display Drip tray (not visible) Digital models Power On/Off and control dial Roller retaining panel

More information

2x2 HDMI Matrix Switch - 4K with Fast Switching and Auto-Sensing

2x2 HDMI Matrix Switch - 4K with Fast Switching and Auto-Sensing 2x2 HDMI Matrix Switch - 4K with Fast Switching and Auto-Sensing Product ID: VS222HD4K Save time and hassle by automatically switching between your HDMI audio/video sources. This 2x2 HDMI matrix switcher

More information

KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus. P/N: Rev 1

KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus. P/N: Rev 1 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: RTBUS-12 Round Table Connection Bus P/N: 2900-300099 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1

More information

Cable System Installation Guide

Cable System Installation Guide Overview Cable System Installation Guide 5/19/2008 Our recommended approach for the installation of your Circle Graphics Cable Systems on the panels in your market is to install the fixed hardware (namely

More information

Industrial Monitor Update Kit

Industrial Monitor Update Kit Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part

More information

A6 OPERATING INSTRUCTIONS

A6 OPERATING INSTRUCTIONS Amerec s A6 control for the AX steamer is a touch screen control intended to be mounted on a wall, generally in or near the steam bath. It may be mounted directly on the wall surface or, using an optional

More information

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements.

FIST-GCOG2-Dx6. Follow all local safety regulations related to optical fiber plant elements. FIST-GCOG2 I N S T A L L A T I O N I N S T R U C T I O N TC-986-IP Rev A, Mar 2017 www.commscope.com FIST-GCOG2-Dx6 Content 1 Introduction 2 General 2.1 Abbreviations 2.2 Kit contents 2.3 Tools 2.4 Accessories

More information

USER MANUEL. SNIPE 2 Ref R13

USER MANUEL. SNIPE 2 Ref R13 USER MANUEL SNIPE 2 Ref. 0141317R13 Contents 1. General Information 1-1. Introduction 1-2. Proper use and operation 1-3. Safety notes......... 2 3 3 2. Contents 2-1. Accessory included 2-2. Name of parts......

More information

Multi-Input to HDMI Automatic Switch and Converter - 4K

Multi-Input to HDMI Automatic Switch and Converter - 4K Multi-Input to HDMI Automatic Switch and Converter - 4K Product ID: HDVGADP2HD This multi-input converter switch lets you connect your DisplayPort (DP), HDMI and VGA audio/video sources to one HDMI display

More information

Photovoltaic Module Installation Manual (IEC)

Photovoltaic Module Installation Manual (IEC) Phono Solar Technology Co., Ltd. Add: No. 1 Xinghuo Rd., Nanjing Hi-tech Zone, Nanjing, China Tel: +86 25 5863 8000 Fax: +86 25 5863 8009 E-mail: support@phonosolar.com Website: www.phonosolar.com PHONO

More information

LED MODULES READYLINE DL

LED MODULES READYLINE DL LED MODULES READYLINE DL BUILT-IN MODULE LED-MODULE READYLINE DOWNLIGHT DL WU-M-538 / WU-M-539 / WU-M-540 Typical Applications Downlights Replacement for CFL DIRECT MAINS CONNECTION REDUCED FLICKER HIGH

More information

Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module

Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Installation and User Guide 458/CTR8 8-Channel Ballast Controller Module Helvar Data is subject to change without notice. www.helvar.com i Contents Section Page Introduction 1 Installation 2 1. Attach

More information

ivw-fd133 Video Wall Controller MODEL: ivw-fd133 Video Wall Controller Supports 3 x 3 and 2 x 2 Video Wall Array User Manual Page i Rev. 1.

ivw-fd133 Video Wall Controller MODEL: ivw-fd133 Video Wall Controller Supports 3 x 3 and 2 x 2 Video Wall Array User Manual Page i Rev. 1. MODEL: ivw-fd133 Video Wall Controller Supports 3 x 3 and 2 x 2 Video Wall Array User Manual Rev. 1.01 Page i Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior

More information

Operating instructions Retro-reflective sensor. OJ50xx laser / / 2010

Operating instructions Retro-reflective sensor. OJ50xx laser / / 2010 Operating instructions Retro-reflective sensor OJ50xx laser 70481 / 00 05 / 010 Contents 1 Preliminary note3 1.1 Symbols used 3 Safety instructions 3 4 Installation 4 4.1 Installation of the supplied mounting

More information

PATCH PANEL Easy Patch INSTRUCTION MANUAL

PATCH PANEL Easy Patch INSTRUCTION MANUAL Page 1 BDA82-0 PATCH PANEL Easy Patch 96 Bantam (TT) Jacks 50 pin D-subminiature NPPA-TT-SD50 Easy Patch NPPA-TT-SD50 Page 2 BDA82-0 Index page 1 Electrical configuration 3 2 Re-Configuration and Replacement

More information

SIR-GM1 GM CLASS-2 BUS COMPATIBLE SIRIUS SATELLITE RADIO TUNER

SIR-GM1 GM CLASS-2 BUS COMPATIBLE SIRIUS SATELLITE RADIO TUNER SIR-GM1 GM CLASS-2 BUS COMPATIBLE SIRIUS SATELLITE RADIO TUNER Installation Guide Congratulations on your purchase of the SIR-GM1 the GM Compatible SIRIUS Satellite Radio Tuner! Your SIR-GM1 is designed

More information

Photovoltaic Module Installation Manual (IEC)

Photovoltaic Module Installation Manual (IEC) Phono Solar Technology Co., Ltd. Add: No. 1 Xinghuo Rd., Nanjing Hi-tech Zone, Nanjing, China Tel: +86 25 5863 8000 Fax: +86 25 5863 8009 E-mail: support@phonosolar.com Website: www.phonosolar.com PHONO

More information

LCD Thermometer / Clock S No. 1253

LCD Thermometer / Clock S No. 1253 Installation and Operating Manual LCD Thermometer / Clock S No. 1253 The 3 fold thermometer with crystal clock is purpose build for the mounting in caravans, boats and intervention vehicles. Please read

More information

2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES

2 WIRE - LOOP POWERED TRANSMITTER FOR PT100 AND NI100 PROBES EN K20RTD 2 WIRE - LOOP POWERED TRANSMITTER FOR PT00 AND NI00 PROBES General Description The K20RTD instrument converts a temperature signal read by a PT00 (EN 60 75) or NI00 probe with connection by 2,

More information

DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE

DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION ORIGINAL ASSEMBLY GUIDE DREAMOC DIAMOND 4K - ASSEMBLY GUIDE VERSION 1.2 - ORIGINAL ASSEMBLY GUIDE It is important to read this assembly guide before using the Dreamoc Diamond, and to follow advices and instructions on safety,

More information

Operating Manual P.01. Outperform. Outlast. Operating Manuel. Operating Manual YACHT MOTORHOME HOTEL

Operating Manual P.01. Outperform. Outlast. Operating Manuel. Operating Manual YACHT MOTORHOME HOTEL P.01 Operating Manuel YACHT MOTORHOME HOTEL P.02 CONTENTS C.01 INTRODUCTION C.02 FEATURES C.03 PRODUCT DIMENSIONS C.04 INITIAL PRODUCT SET UP Set up P.06 Images P.07-08 C.05 PRODUCT CONTROL IR remote control

More information

MONDO VIDEOSCREENS AND LED SOLUTIONS

MONDO VIDEOSCREENS AND LED SOLUTIONS MONDO VIDEOSCREENS AND LED SOLUTIONS DESCRIPTION A MONDO video screen is not only a product but a full package that includes personalized service done at different stages, from before to after the production

More information

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01

Instruction Manual. Universal Flow Controller Model 261 / 261-EC-01 Universal Flow Controller Model 261 / 261-EC-01 Instruction Manual Type ARS 261-EC 01 Art.-no: 82212264 Table of Contents 1. Safety Instructions 2. Product ID - Dimensions 3. Function Description 4. Installation

More information

CLF Manuals CLF Colour Par CLF Colour 12 Par CLF Colour Par 12 Version 1.0 November 2012 Version 1.0 1

CLF Manuals CLF Colour Par CLF Colour 12 Par CLF Colour Par 12 Version 1.0 November 2012 Version 1.0 1 CLF Manuals CLF Colour Par 12 CLF Colour Par 12 Version 1.0 November 2012 1 1.BEFORE YOU BEGIN What is included Ø 1 x Fixture Ø 1 x Power cable with plug Ø 1 x User Manua Unpacking Instructions Immediately

More information

12.1 Inch CGA EGA VGA SVGA LCD Panel - ID #492

12.1 Inch CGA EGA VGA SVGA LCD Panel - ID #492 12.1 Inch CGA EGA VGA SVGA LCD Panel - ID #492 Operation Manual Introduction This monitor is an open frame LCD Panel monitor. It features the VESA plug & play system which allows the monitor to automatically

More information

RADIO RECEIVER RGB CONTROLLING LED COMMON KATHODE

RADIO RECEIVER RGB CONTROLLING LED COMMON KATHODE RADIO RECEIVER RGB CONTROLLING LED COMMON KATHODE Product code: TVRGBDSYA0 Syncroled Master receiver 0mA TVRGBDSYM0 Syncroled receiver 0mA TVRGBDSYB0 Syncroled Master receiver 00mA TVRGBDSYN0 Syncroled

More information

General Wiring and Installation Guidelines. Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers

General Wiring and Installation Guidelines. Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers General Wiring and Installation Guidelines Typical Mounting Installations Electrical Connections General Guidelines Common Questions & Answers Congratulations on your purchase of a Dynapar brand encoder.

More information

USER S MANUAL (1/2) (Functions and connections)

USER S MANUAL (1/2) (Functions and connections) English USER S MANUAL (1/2) (Functions and connections) WIDE PLASMA DISPLAY P42VCA30W/P42VCA30E WITH OPTIONAL VIDEOBOARD (P-TE1100/P-TE1110/P-TE1120/P-TE1130) HE4VS01W/HE4VS01E WITH OPTIONAL VIDEOBOARD

More information

User Manual Color Video Door Phone

User Manual Color Video Door Phone User Manual Color Video Door Phone CMV-43A Thank you for purchasing COMMAX products. Please carefully read this User s Guide (in particular, precautions for safety) before using a product and follow instructions

More information

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display.

1 Output 1 operation. 3 Pressure unit display. 4 Main display Large 4-character LCD display. 5 Sub-display Small 4-character LCD display. ure Sensor DP-100 Series INSTRUCTI MANUAL High-performance Digital Display For use outside Japan MEUML-DP100 V1.1 Thank you for purchasing products from Panasonic Electric Works SUNX Co., Ltd. Please read

More information

Documentation on all Paxton products can be found on our web site -

Documentation on all Paxton products can be found on our web site - 11/05/2012 Ins-30202-US Net2 Entry - Monitor Paxton Technical Support 1.800.672.7298 supportus@paxton-access.com Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST) Documentation

More information

User Manual. SWIT ELECTRONICS CO., LTD Model: S-4904P Wireless HD Transmission System(with Panel Receiver) Ver:A

User Manual. SWIT ELECTRONICS CO., LTD Model: S-4904P Wireless HD Transmission System(with Panel Receiver) Ver:A SWIT ELECTRONICS CO., LTD Model: S-4904P Wireless HD Transmission System(with Panel Receiver) User Manual Ver:A Please read this User Manual throughout before using Preface 1. All internal technologies

More information

PL2410W LCD Monitor USER'S GUIDE.

PL2410W LCD Monitor USER'S GUIDE. PL2410W LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 First Setup...3 Front View of the Product...4 Rear View of the Product...5 Quick Installation...6

More information

Motor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at

Motor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at * Motor Operated Solar Shade with Valance Installation and Care Instructions Complete Video Instructions Available Online at www.keystonefabrics.com Step 1: Identify the parts of your shade (parts shown

More information

User s Manual. Digital Media Converter Package Part #: DL-HDCAT-WP

User s Manual. Digital Media Converter Package Part #: DL-HDCAT-WP User s Manual Digital Media Converter Package Part #: DL-HDCAT-WP TABLE OF CONTENTS 1-1 Table of Contents 1-2 Welcome and Safety Notes 1-3 Product Description and General Specifications 1-4 Environmental

More information

PXL2760MW LED LCD Monitor

PXL2760MW LED LCD Monitor PXL2760MW LED LCD Monitor USER'S GUIDE www.planar.com Content Operation Instructions...1 Safety Precautions...2 Package Overview...3 First Setup...4 Front View of the Product...5 Rear View of the Product...6

More information

User Manual MODEL: KKF1500-PCAP. True FLAT P-CAP LCD Monitor. Installation Guide. 15 True FLAT P-CAP Touch LCD Monitor

User Manual MODEL: KKF1500-PCAP. True FLAT P-CAP LCD Monitor. Installation Guide. 15 True FLAT P-CAP Touch LCD Monitor True FLAT P-CAP LCD Monitor User Manual Installation Guide 15 True FLAT P-CAP Touch LCD Monitor MODEL: KKF1500-PCAP i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com

More information

Light Curtain Type LA

Light Curtain Type LA Light Curtain Type LA Status: 2011-04-27 Subject to change without notice. No responsibility is taken for the correctness of this information. Your suggestions for corrections or improvements are welcome!

More information

Instruction Manual. from software version 1.0 (instruction version 1.3) Internet:

Instruction Manual. from software version 1.0 (instruction version 1.3)   Internet: Instruction Manual from software version 1.0 (instruction version 1.3) email: service@glp.de Internet: http://www.glp.de GLP German Light Production (V1.3) 1 Table of contents 1 Description of Device...

More information

3. Electronics and MMU2 unit assembly

3. Electronics and MMU2 unit assembly Written By: Jakub Dolezal 2018 manual.prusa3d.com/ Page 1 of 34 Step 1 Tools necessary for this chapter Please prepare tools for this chapter: 2.5mm Allen key for M3 screws 2mm Allen key for nut alignment

More information

Medium Box for Cable Termination

Medium Box for Cable Termination FIST-MB2-T I N S T A L L A T I O N I N S T R U C T I O N Medium Box for Cable Termination Contents 1 Introduction 1.1 Product description. 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre assembling

More information

SV-LCD50. Installation and User Guide. Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) Color Rear Vision Monitor. Version 1.

SV-LCD50. Installation and User Guide. Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) Color Rear Vision Monitor. Version 1. SV-LCD50 Installation and User Guide Thin-Film Transistor (TFT) Liquid Crystal Display (LCD) Color Rear Vision Monitor Version 1.00 August 2004 SV-LCD50 Installation and User Guide TFT LCD Color Rear Vision

More information

PayMatic P2000. Installation Manual PayMatic P2000. Product Version: N/A. Version of this manual: Inepro B.V. All rights reserved

PayMatic P2000. Installation Manual PayMatic P2000. Product Version: N/A. Version of this manual: Inepro B.V. All rights reserved PayMatic P2000 Installation Manual PayMatic P2000 Product Version: N/A Version of this manual: 2.1.2 2016 Inepro B.V. All rights reserved PayMatic P2000 The most versatile payment solution Congratulations

More information

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at

ACT 10 Digital Keypad Operating & Installation Instructions This manual is found at ACT 10 Digital Keypad Operating & Installation Instructions 18-00001 This manual is found at www.eaglesecuritysolutions.co.uk Installation Notes Always remember to factory default the controller before

More information

The Two Assemblies. Standard Assembly For signs up to 11" wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal

The Two Assemblies. Standard Assembly For signs up to 11 wide. Pull flexible lens directly outward with Sucton Cup Tool for lens removal System Overview The Two Assemblies The Arris system is comprised of two unique assemblies, each designed to provide maximum cost effectiveness and design flexibility for specific types of signs. With both

More information

Video Door Entry System Kits 2 Wires Installation

Video Door Entry System Kits 2 Wires Installation Video Door Entry System Kits 2 Wires Installation Safety & Operating Instructions Réf. NVM-902/NVC-9102B1+NPS-17 2014-10-20 These instructions are for your safety. Please read through them thoroughly before

More information

Three Axis Digital Readout System

Three Axis Digital Readout System NEWALL MEASUREMENT SYSTEMS C80 Three Axis Digital Readout System CONTENTS 2 SPECIFICATIONS 3 CONNECTIONS 4 MOUNTING 4 Arm Mounting (Non-adjustable) 4 Arm Mounting (Adjustable) 5 Face Mounting (Adjustable)

More information

Model: S-1071H(EFP) 7" EFP Field On-camera LCD Monitor. User Manual. Please read this User Manual throughout before using.

Model: S-1071H(EFP) 7 EFP Field On-camera LCD Monitor. User Manual. Please read this User Manual throughout before using. Model: S-1071H(EFP) 7" EFP Field On-camera LCD Monitor User Manual Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please read this user

More information

ART2000i Digital Dimming System. Installation guide. Stock number *8200-

ART2000i Digital Dimming System. Installation guide. Stock number *8200- ART2000i Digital Dimming System Installation guide Stock number 8200-0159 *8200- 0159* Useful Avolites phone numbers:- Avolites England Sales and service* (+44) (0) 20 8965 8522 Service out of hours* (+44)

More information

OM2000N INSTALLATION MANUAL

OM2000N INSTALLATION MANUAL OM2000N INSTALLATION MANUAL 2 1 Figure A 1 2 Laser Beam Output Window Power Cable 821001342 (Rev. B) DESCRIPTION The OM2000N oscillating mirror is an accessory for the 2000N family laser scanners: DS2100N,

More information

Media Tube CW x 48.5mm 1.12 x mm mm mm kg 5.1lbs. 1.6kg 3.5lbs

Media Tube CW x 48.5mm 1.12 x mm mm mm kg 5.1lbs. 1.6kg 3.5lbs Date: Quantity: Company: Project: Media Tube CW The Traxon Media Tube CW is an IP66/IP67-rated slim LED tube for any wall or façade media lighting. Available in 295mm, 495mm, 995mm, and 1495mm lengths,

More information

S020 fluorescent tube luminary

S020 fluorescent tube luminary S020 fluorescent tube luminary DESCRIPTION: Fluorescent lamps S020 are suitable above all for uniform lighting of bigger areas. Lamps from the range S020 are manufactured from extruded aluminium profile

More information

Operating Manual (Edition 04/2004) sinamics. Line Reactors SINAMICS G130

Operating Manual (Edition 04/2004) sinamics. Line Reactors SINAMICS G130 Operating Manual (Edition 04/2004) sinamics Line Reactors SINAMICS G130 Contents 1. Safety Information 2 2. General 5 3. Mechanical Installation 6 4. Electrical Installation 8 5. Technical Specifications

More information

ACCESSORIES MANUAL PART NUMBER: PRODUCT REVISION: 1 PNP202. Interconnect Box USER'S GUIDE

ACCESSORIES MANUAL PART NUMBER: PRODUCT REVISION: 1 PNP202. Interconnect Box USER'S GUIDE MANUAL PART NUMBER: 400-0109-001 PRODUCT REVISION: 1 PNP202 Interconnect Box USER'S GUIDE INTRODUCTION Your purchase of the PNP202 Interconnect Box is greatly appreciated. We are sure you will find it

More information

Litile34 INSTALLATION MANUAL

Litile34 INSTALLATION MANUAL Litile34 INSTALLATION MANUAL Seamless Tiled Panel Wall Solution for Large Area Digital Signage Display (1st Edition 3/25/2009) All information is subject to change without notice. Approved by Checked by

More information