Decoder - Streamer WSD-2 HD

Transcription

1 Installation and Configuration English Decoder - Streamer WSD-2 HD Rev /

2 Information about copyright, trademarks, design patents 2009 All rights reserved. This document may not be copied, photocopied, reproduced, translated, transferred to an electronic medium or converted to a machine-readable form either whole or in part without first receiving written permission from GmbH & Co.KG. We reserve the right to make technical modifications. The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer. GmbH & Co.KG Cranachweg 1 D Regensburg, Germany info@dallmeier.com All trademarks identified by are registered trademarks of. All trademarks identified by *) are trademarks or registered trademarks of the following owners: AMD Athlon of Advanced Micro Devices headquartered in Sunnyvale, California, USA Adobe and Flash of Adobe Systems Incorporated headquartered in San Jose, California, USA IBM of International Business Machines Corporation headquartered in Armonk, New York, USA Intel and Pentium of Intel Corporation headquartered in Santa Clara, California, USA Microsoft, DirectX, Internet Explorer and Windows of Microsoft Corporation headquartered in Redmond, Washington, USA Mozilla and Firefox of Mozilla Foundation headquartered in Mountain View, California, USA Third-party trademarks are named for information purposes only. respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected. 2

3 Table of contents 1 This document Validity Documents Conventions Safety instructions General notes Scope of delivery Transportation and packaging Appropriate use Performance features Warranty Certifications Connection assignment Front Back Installation and commissioning Requirements at the installation side Stand-alone Installation Requirements Installation Rack mounting Requirements Mounting Commissioning Preparation System requirements Establishing a connection Basic settings Language Text display System time Manual setting Timeserver Video standard COM interface Password Fieldcontact display Fieldcontact display filters Fieldcontact display position HDMI interface

4 8 Network settings General settings Alarm host Setting up Editing and copying Recording settings Decoder Audio and video source Tracks Creating tracks Deleting a track Deleting recordings Recording Saving the configuration Saving the configuration file Sending the configuration file Individual module Several modules Information and log Information dialogue MAC adress Event log Breaking the connection Cleaning and service Cleaning Service Technical data Pin assignment interfaces Dimensions

5 1 This document 1.1 Validity This document applies to the high-definition 2 channel audio and video decoder WSD-2 HD. The descriptions in this document are based on the DCM-1 module software version Documents Commissioning The document entitled Commissioning contains the most important steps for the connection and commissioning of the device. Installation and Configuration (this document) The document entitled Installation and Configuration contains detailed descriptions of the installation, connection, commissioning and configuration of the device. Safety instructions, general notes and technical data are additionally provided. The target audience is exclusively specially trained and authorized professionals (installers). 1.3 Conventions This document contains warning words and symbols that indicate potential sources of danger. Various symbols and formats are used to maintain the clarity of the document. DANGER The warning word DANGER denotes an immediate danger that may cause death or serious injury if it is not averted. WARNING The warning word WARNING denotes a possible danger that may cause death or serious injury if it is not averted. CAUTION The warning word CAUTION denotes a possible danger that may cause minor injury if it is not averted. IMPORTANT The word IMPORTANT denotes information for preventing damage, incorrect configurations or incorrect actions. NOTE A NOTE offers information on principles, special features and efficient procedure as well as general recommendations. 5

6 Expression Expressions in bold and italics generally indicate a control element on the device (switches or lables) or on its users interface (buttons, menu, entries). 6

7 2 Safety instructions Only use this unit if it is technically in proper working order, to the intended purpose and while keeping safety and potential dangers in mind. Have malfunctions or damages eliminated immediately! Appoint a professional Installation, mounting, connection, start-up and configuration of the unit may only be carried out by trained and authorized professionals (installers). Unless otherwise expressly specified, this also applies to the maintenance, testing and repair. In doing so the regulations of the DIN VDE 0701 series of standards (repair, modification and inspection of electrical appliances) must be followed in addition. Read and pay attention to the documents Carefully and completely read the documents included in delivery. Always pay attention to the provided instructions, notes and warnings. Regulations surveillance systems The use of video and audio surveillance systems is strictly regulated in most countries. Therefore, inform yourself on laws and regulations that govern individual applications before using the unit. Ensure compliance with these laws and regulations and also observe regulations regarding data, working and environmental protection. Do not make modifications Do not make any modifications to the unit (neither to the software nor the hardware) without consulting. Improper modifications can cause malfunctions or damages. accepts no liability for damages resulting from unauthorized or improper modifications to the unit. Protection against condensation water If the unit is brought from a cold to a warm environment, condensation water can form inside the unit. Short-circuits may then lead to damage to the system. Wait up to 8 hours for the unit to reach room temperature before starting it up. Observe the rated voltage The unit can be damaged or destroyed by the application of an incorrect voltage. The mains voltage must always match the rated voltage of the unit. The rated voltage is specified on the rating plate of the unit. Observe ratings Unsuitable ambient conditions and improper installation (mainly too high ambient temperature and insufficient ventilation) may reduce the unit s life cycle. Ensure compliance with the stated operating conditions (see technical data), requirements at the installation site and, if applicable, maintenance regulations. Expansion components/peripheral devices Use only expansion components conforming with the technical data of the unit. Inappropriate peripheral devices may result in the violation of local laws and regulations and damages to the unit. In case of doubt, contact the sales partner responsible for your area. 7

8 Do not move while in operation Strong vibrations can cause damage to the unit, in particular to the hard disk(s). Therefore, do not bump the unit or move it in a jerky motion while in operation. Instruct the cleaning personnel accordingly if necessary! Do not open the unit Do not open the housing of the unit. There are no components inside the unit that require maintenance by the user. The inspection, maintenance and repair with an open housing must only be carried out by trained and authorized professionals (installer). Penetration of foreign bodies and liquids No objects or liquids may be allowed to get into the device. In this case, immediately disconnect the unit from the power supply (pull out the power plug). Please contact the sales partner responsible for your area. Measures to be taken in the event of damage and burnt smell If you notice burnt smell or formation of smoke from a unit, immediately disconnect it from the power supply (pull out the power plug). Please contact the sales partner responsible for your area. Disposal Disconnect the unit from the power supply. Remove all connected units and system components. Return the unit to your respective sales partner. 8

9 3 General notes 3.1 Scope of delivery Included in the standard scope of delivery is: 1x WSD-2 HD 1x Power supply unit 1x 19 bracket 1x Documentation Installation and Configuration (CD) The scope of delivery may differ depending on the ordered equipment or device variant. The device s range of functions depends on the ordered equipment or device variant and may therefore not correspond with this document s content. Certain functions and features may require an activation that is subject to costs. 3.2 Transportation and packaging Store the original packaging for transportation at a later date. is not responsible for damage resulting from unprofessional/improper transportation. The goods should only be shipped in their original packaging. If the original packaging is no longer available, ensure that the packaging used sufficiently protects the unit against damage, moisture, heat and cold. 3.3 Appropriate use The WSD-2 HD is a high-definition 2 channel audio and video decoder with recording capability. It is able to receive audio and video streams via an Ethernet network (unicast or multicast), decode them and output them via its HDMI interfaces (up to 1080p). The WSD-2 HD is a stand-alone device in compact design (1HU). Additionally, it is designed for the installation in a 19 rack an operation in control and server room. 3.4 Performance features The WSD-2 HD is especially characterised by the following functions and properties: 2x IP based video decoder channel Simultaneous decoding, recording and live display/playback Supported video formats: MPEG-2/-4, MJPEG, H.264 Supported audio formats: MPEG-1 Layer 2, G.722 Bit rate (constant or dynamic) up to 16 Mbps HDMI ready with an output format up to 1080p Video outputs: 2x CVBS/BNC (only active at SD resolution) Fast display times, low delay (less than 100ms) Upscaling from SD to 720p, 1080i or 1080p Configuration with web browser via LAN Evaluation with SeMSy or PView via Ethernet Linux operating system on Flash memory 9

10 2x HDDs for recording optionally available Compact design, 1HU Provided with power supply unit and 19 bracket for installation into a 19 rack NOTE For detailed information please see chapter Technical data. 3.5 Warranty The terms and conditions valid at the signing of the contract shall apply. 3.6 Certifications The following certifications were in effect at the time this document was produced: CE 10

11 4 Connection assignment 4.1 Front DCM-1 Module DCM-1 Module Fig. 4-1 DCM-1 Fig HDD plug-in module 2 Status LEDs (Power, Record, Alarm, Error) 3 Video OUT (CVBS) 4 Video OUT (HDMI) 5 Audio OUT (3.5 mm phone jack) 6 Serial interface (RS232/RS485 RJ12) 7 LAN interface (RJ45) NOTE The modules on the left and on the right are identically developed. 4.2 Back Fig Fan 1 9 Fan V power in 11

12 5 Installation and commissioning 5.1 Requirements at the installation side Unfavorable local conditions may shorten the life of the product or lead to malfunctions. Do not operate the WSD-2 HD at places: with large scale dust and dirt with steam or oil vapors (e.g. kitchen) with direct sunlight with unsuitable ambient temperatures (see technical data) near sources of strong radiation, i.e. X-rays, radio transmitters or magnetic fields with corrosive surroundings (e.g. gases or salt water) with insufficient ventilation (e. g. closed cabinet) 5.2 Stand-alone Installation The WSD-2 HD may be freely positioned in a place respecting the requirements mentioned above. Attention should be paid to the fact that all connections are freely accessible Requirements Computer room This device is not for use in a computer room as defined in the Standard for Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. Secured room Manipulation and sabotage danger. A stand-alone installation should be made in secured rooms with restricted access only. Socket-outlet The used socket-outlet has to be installed near the device. It has to be easily accessible Installation Do not place the device upside down. Ensure a stable and horizontal surface. Ensure sufficient ventilation with 4 inch free space on the front and back side. 12

13 Fig. 5-1 Establish the required connections as described in the following. Start-up and login for configuration as described in the following. 5.3 Rack mounting The WSD-2 HD can be installed in a 19 standard rack using two 19 mountings (option) Requirements Elevated operating ambient The operating ambient temperature in a multi-unit rack may be greater than the room ambient. Ensure that the maximum ambient temperature in the rack complies with the requirements specified in the technical data. Reduced air flow The air flow in a (closed) rack may be reduced. Ensure that the amount of air flow required for save operation is not compromised. Ensure sufficient ventilation with 4 inch free space on the WSD-2 HD front and back side. Mechanical loading Mechanical loading may damage the device. Do not mount the WSD-2 HD upside down. Ensure a stable and horizontal mounting. Circuit overloading The device can be damaged or destroyed by the application of an incorrect voltage. The mains voltage must always match the rated voltage. The rated voltage is specified on the nameplate. 13

14 Reliable earthing Ensure a reliable earthing of the WSD-2 HD. Use power strips when other supply connections than direct connections to the branch circuit are being used Mounting Remove the four housing screws. Fid. 5-2 Place the two 19 mountings against the housing. Fig. 5-3 Secure the 19 mountings to the housing using the removed screws. Install the device in the 19 rack. IMPORTANT Follow the instructions supplied by the rack manufacturer. Do not mount the device upside down. Ensure a stable and horizontal mounting. Ensure sufficient ventilation with 4 inch free space on the fan sides. Establish the required connections as described in the following. Start-up and login for configuration as described in the following. 14

15 5.4 Commissioning WARNING Danger of death from electric shock in the event of a lightning strike! Data transfer and video cables must not be connected or disconnected during a storm. Connect both modules of the WSD-2 HD to the network. Connect the WSD-2 HD to the power supply. Both modules start at the same time. They are ready for configuration via network after approx. 45 seconds. Make the configuration as described in the following. 15

16 6 Preparation Both modules will be configured via a PC with web browser in the LAN. 6.1 System requirements Detail Desktop CPU RAM OS OS service packs Graphics card Monitor Ethernet Browser Miscellaneous Requirements PC (IBM *) compatible) Intel *) Pentium *) 1.3 GHz (or higher) or AMD *) Athlon *) (or equivalent) 1.3 GHz (or higher) Min.128 MB, recommended 256 MB Microsoft *) Windows 2000 / XP Recommended, latest version VGA compatible, min. 64 MB, DirectX *) capable Resolution min x 768, colors min. 16 Bit 100 Mbit/s Microsoft Internet Explorer *) 6.0 or higher Mozilla Firefox *) (Linux) or (Windows) Adobe Flash Player *) 5 (Windows) or 7 (Linux) 6.2 Establishing a connection Before you establish a connection, first ensure that the configuration PC and the modules of the WSD-2 HD are in the same LAN. The WSD-2 HD and PC or laptop can also be connected direct using a cross cable. First start the browser. Enter the IP address of the module in the browser s address line. NOTE If the DCM-1 has not yet been configured, use the default address set at the factory ( ). Confirm the input. The connection to the respective module will be established. First of all the login pages will be displayed. 16

17 Fig. 6-1: DCM-1 module login page Enter the password. Confirm the password by clicking on OK. NOTE If the modules have not yet been configured, use the default password set at the factory (3). To protect the modules from unauthorized access, you must change the default password. After you have logged in successfully, the main or navigation pages will be displayed. Fig. 6-2: DCM-1 navigation page The single configuration dialogue can be selected and opened with the navigation bar (left). 17

18 7 Basic settings The basic configuration dialogues are centralised under Common settings: Fig Language Open the User interface dialogue via Common settings > User interface... Fig. 7-2 Select the Language tab. Select the required Language. Confirm with OK. 7.2 Text display The WSD-2 HD is able to integrate and display data in the output video signal. Open the User interface dialogue via Common settings > User interface... Fig

19 Select the Player tab. Set which data should be integrated and displayed (activate checkbox). Set the Transparency level for the displayed text (0 = not transparent). Control the displayed image. Confirm with OK. NOTE The camera name can only be displayed if it is defined on the evaluation station (SeMSy ). 7.3 System time The system time can be set manually or be actualised via network. Open the Set time dialogue via Common settings > Time Manual setting NOTE If a time server was set (see chapter Timeserver), neither the date nor the time can be set manually. Select the Date/Time tab. Fig. 7-4 Enter Date and Time. Select the Timezone tab. Fig. 7-5 Set the Timezone. Confirm with OK. 19

20 7.3.2 Timeserver Select the Timeserver tab. Fig. 7-6 Activate the use timeserver checkbox. Enter the IP adress of the Timeserver. Finally confirm with OK. 7.4 Video standard Open the Video standard dialogue via Common settings > Video standard... Fig. 7-7 Set the Standard. Confirm with OK. 7.5 COM interface External devices, such as a dome or PTZ camera, can be connected to the module s COM interface. These devices are controlled by the evaluation software (PView, SeMSy, etc.). The control signals are sent to the module using the DaVid protocol. This then forwards the signals to the external device. Open the Interfaces dialogue via Common settings > Interfaces... Fig. 7-8 Set the Function to Crosslink. Make the necessary settings. Finally confirm with OK. 20

21 7.6 Password Open the Change password dialogue via Common settings > Password... Fig. 7-9 Enter the the active password at Current password. Enter the New password and confirm it. Finally confirm with OK. IMPORTANT For security reasons the new password should consist of at least 8 characters. Do not use any conventional expressions or names, but instead use a combination of numbers and letters. 7.7 Fieldcontact display The module can be made to write external data to the track by an external program or device (using the DaVid protocol). For example, an automatic teller machine can send the account number and sort code for a transaction. The data for this field contact can be displayed in the image when the track is played back. Which data are displayed and in what position on the screen can be defined in the Fieldcontact display dialogues. NOTE The dialogues described here define the display of the fieldcontact data for playback at the evaluation station. The recording of the field contact data must be activated in the recording settings Fieldcontact display filters First of all decide which field contact data are relevant for the display. Click on Common settings > Fieldcontact display... > Filter. 21

22 Fig If the Enable checkbox is checked, the marked field contact data will be displayed in the track playback. However, this is only possible for data that are sent to the module. In default state, all types of field contact data are activated for the display. Deactivate those that you do not require by unchecking the checkbox. During the playback the data are displayed in the image that was recorded when the data were received (in other words when the field contact was received). The duration of the display depends on the value set in Display time Fieldcontact display position To ensure that the display of the field contact data on the evaluation station or interface does not cover any important image sections, you can define the position of the display. Click on Common settings > Fieldcontact display... > Position. Fig A screen will be shown through the blue rectangle background on the right-hand side of the dialogue (Dallmeier logo). The white lines represent the stylized playback panel of a typical evaluation station. The white rectangle (with the blue corner) symbolizes the screen area in which the field contact data are displayed. The display area can be repositioned using a drag & drop technique. Precise positioning is possible using the coordinates that are displayed on the left-hand side of the dialogue. X Pos. denotes the horizontal position of the display area and Y Pos. its vertical position, relative to its top left-hand corner. The position details are entered in pixel form, relative to the full resolution for PAL or NTSC. 22

23 Fig If you click on the blue corner (bottom right), you can change the size of the display area by pressing and holding the mouse button. The Width and the Height of the display area is displayed in pixels on the left-hand side of the dialogue. Fig When you have set up the display area to suit the situation on the evaluation station, save the setting by clicking on OK. 7.8 HDMI interface The HDMI interface does not support auto-negotiation and consumer electronics control (CEC). It has to be configured manually for the connected device. Click on Video... Fig Select the necessary resolution at HDMI Resolution. Select the aspect ratio at Scaling mode. Select the Filter mode. 23

24 8 Network settings 8.1 General settings The basic network settings are made in the Network settings dialogue. NOTE After the network settings have been changed, the connection to the DCM-1 is broken. You then have to log in again. Select Common settings > Network... Fig. 8-1 First select the appropriate Link speed for the current LAN. In most cases the defaultsetting automatic will suffice. If you check the DHCP option, you will connect to the existing network without any furtherconfiguration. No other information (IP address, etc.) must be entered. In this case the module takes its network settings from a central DHCP server. If DHCP is not selected, enter the IP-Address for the module and also the Netmask and the Gateway. Save your settings by clicking on OK. Log back on to the system. 8.2 Alarm host If you wish to configure an alarm host, the module can send alarm messages via the LAN. A software package (for example PGuard) to evaluate the messages must be running on the receiving computer. Select Common settings > Alarm hosts... If you have not previously configured an alarm host, only the New... option will be displayed. 24

25 8.2.1 Setting up Fig. 8-2 Click on the New... selection. The selection is expanded to include the Alarm host 1 entry. Fig. 8-3 Click on Settings. Click on the Name field. Enter the name of the computer which is to receive the alarm notifications from your DCM-1. Click on the IP address field and enter the IP address of the receiving computer (alarm host). All the settings for the selected host are only applied when the checkbox located next to active is checked. Selecting messages To select the messages to be sent to the alarm host, open the Messages tab. Fig. 8-4 Click on Messages. The following messages can be transmitted: harddisk failure Defective hard disk track deleted The recording track has been deleted. power supply status Notification in the event of a power supply failure 25

26 You can select one or more notifications by ticking the respective checkbox. Fig. 8-5 If you don t want to make any additional settings (e.g. Scheduler function or Copy), click on OK to save your settings. Fig. 8-6 After clicking on OK, the designation alarm host 1 is replaced by the name you entered. NOTE Please note that this calendar only applies to the selected alarm host. Additionally, there is no connection to the calendar function for video recording. Set week schedule Fig. 8-7 Click in the selection list on the host for which you would like to configure the calendar. Fig. 8-8 Click on the Scheduler button. 26

27 Fig. 8-9 All areas in the weekly plan which are shown as light colored are active areas (pre-set). This means that within this time area all selected messages will be sent to the corresponding alarm host. Fig Click on the not active button. Move the mouse pointer over the top left corner of the desired time area. If you change the position of the cross hairs whilst holding the mouse button, a dark square will be opened (see Fig. 8-11). Dark areas are inactive time areas. The smallest time unit you can set is 15 minutes. In the example shown here (Fig. 8-10) the time from 02:15 to 02:30 has been marked as not active. This means that within this time period no messages will be forwarded to the alarm host. Fig To undo the marking, click on the active button and trace a square over the inactive area. You also can remark certain sections within the inactive area as active by tracing the particular section. Active and inactive time areas defined using the above-mentioned method are valid for the entire year. 27

28 If no exceptions are to be made (see the following paragraph), click on OK. Exceptions to the weekly plan To account for public holidays and company-specific deviations you can stipulate exceptions to the weekly plan. Fig Open the Exceptions tab. Click on New... Fig Mark the day for which you would like to apply the deviation setting in the displayed calendar. Confirm your selection by clicking on OK. Fig After confirming the security message which appears, the date you have selected will be entered in the list. All 24 hours are initially marked as not active for this date. 28

29 Fig Click on the active button. Now mark the time during which the system is to be active (i.e. deviate from the standard setting). Copy exceptions for another date If you want the set exception to apply to other days as well you can copy these settings for a new date. Fig Click on Copy... Select the new date in the displayed calendar. Confirm the selection by clicking on OK. The new date now appears in the list with the setting of the previous date. Delete exceptions Fig Mark the respective date in the list. Click on Delete. 29

30 Apply exceptions to the week timer Fig Click on OK to apply this exceptions to the week timer Editing and copying Editing Open the Alarm hosts dialogue for the appropriate alarm host to edit the details. Make the required changes and confirm them by clicking on OK. Copying The Copy function allows you to make a copy of all settings for another alarm host. To copy the settings of an alarm host, click on the relevant alarm host in the selection list. Fig Open the Settings tab. Click on Copy... The name of the copied alarm host now appears in the alarm hosts selection list and in the Name field with the attribute (1) for first copy. Change the Name and the IP address of the copied alarm host. IMPORTANT The IP address of the new alarm host must be changed since otherwise there will inevitably be network conflicts. All of the settings that were made for the original alarm host under Messages and Scheduler apply to this new alarm host. 30

31 9 Recording settings 9.1 Decoder If the module is equipped with hard disk drives it can be configured for local recording of the output audio and video signal in addition to it s decoding and displaying. NOTE Evaluation of the local recordings is possible with SeMSy or PView (in appropriate version) only. 9.2 Audio and video source The definition of the decoder s audio and video source is effected in the Video streaming dialogue. NOTE The decoded audio and video source can be switched dynamically via SeMSy. Open the Video streaming dialogue via Common settings > Video streaming... Fig. 9-1 Set the (streaming-) Mode that the audio and video source is using. Enter the audio and video source s IP address. Enter the used Port. Confirm with OK. The output of the audio and video signal is effectuated immediately. The optional local recording can be configured in addition. 9.3 Tracks First of all tracks have to be defined for local recording. The number of tracks depends on the number of the module s hard disk drives. A module with two hard disk drives can be configured with one track on 2 HDD or with two tracks each on one HDD. 31

32 NOTE In standard configuration one track on all available HDDs is defined. An existing allocation of a track to a hard disk drive always can be deleted and redefined. But in this case all recordings will be lost Creating tracks Click on Tracks > New. The navigation bar will be extended. Fig. 9-2 Open the Track settings via Tracks > Track 1. Fig. 9-3 Select the relevant encoder as Input. Enter the track Name. You can limit the age of the recorded data. Activate the checkbox Limit age of recorded data. Select how long with Days or Hours. Allocate the track to the available HDDs by activating the checkbox Partition 2. Finally confirm with OK Deleting a track A track s definition and recordings can be deleted completely. Open the Track settings dialogue via Tracks > Track name. Fig

33 Click on Delete. Confirm the safety dialogue. All recordings and the track s definition will be deleted irretrievably. The corresponding HDD can be reallocated afterward Deleting recordings All recordings of a track can be deleted without changing the allocation. Open the Track settings dialogue via Tracks > Track name. Fig. 9-5 Click on Delete data. Confirm the safety dialogue. All recordings of a track will be deleted irretrievably. Then the recording will automatically be continued with the current settings. 9.4 Recording The activation of the local recording is effected relating to the track in the Recording settings dialogue. Additionally the option Event recording can be used to simplify the evaluation of a track. Thereby certain events can be defined so that a marker is set and recorded in the track if these events occur using suitable search functions, it is possible to go straight to these markers in the track during the evaluation process. This allows the images that were recorded at the time of the event to be checked very quickly. Open the Recording settings dialogue for the relevant track via Recording > Track name. Fig. 9-6 Set the Mode to Permanent in order to activate the recording. Set the relevant events by activating the corresponding checkboxes. Please note the explanations below. Confirm with OK. 33

34 record start If the checkbox for record start is activated, a marker is recorded at every recording start regardless of other settings. fieldcontact The module can be made to write external data to the track by an external program or device (using the DaVid protocol). For example, an automatic teller machine can send the account number and sort code for a transaction. If the fieldcontact checkbox is activated, a marker is always set in the track if such information is saved in the track. bookmark The marker is set in the track whenever the module receives the command for this via the DaVid protocol (from an external program or device). 34

35 10 Saving the configuration The configuration of each module can be exported as a file and thus backed up. In addition to re-establishing an individual module, the configuration can also be transferred to several modules simultaneously Saving the configuration file To transfer and save the configuration on the configuration PC, click on Config File > Save. You can decide which configuration groups should be included in the backup in the Config File Management dialogue. Fig IMPORTANT If you wish to transfer the configuration at a later date to several devices, you must not save the Network settings configuration group. IMPORTANT If you wish to transfer Track settings and Video standard to a module which originally had different settings in these areas, the module s images or tracks must be deleted. Click on OK after the selection has been made. Follow the instructions in the download dialogues and save the configuration file. The configuration file is a plain text file. The file name contains the IP address of the relevant module Sending the configuration file The configuration file saved on the configuration PC can be sent to an individual module. This allows the configuration to be restored on the module that is currently connected. In addition the configuration file can also be sent to several modules at the same time. This is a very effective method of configuring several modules identically in terms of certain configuration groups. 35

36 Individual module To restore the configuration of an individual module, first establish a connection to this module. Open the Config File Management dialogue via Config File > Upload. Fig Click on Search (Durchsuchen). Select the relevant configuration file on your configuration PC. Click OK. At the end of the transfer the system will display a list of transferred (or skipped) configuration groups. Fig Several modules The prerequisite for this method is that all the relevant devices are integrated in a LAN (with suitable cabling and a separate IP address for each device). In addition the password must be identical for all the devices. Before the configuration file is sent, it must be saved as described above. However, the Network settings configuration group must not be included in the file that you save. If these settings were included, the same IP address would be sent to all the modules. Since, however, every IP address in the LAN must be unique, this would cause massive problems in the LAN. 36

37 IMPORTANT Ensure that the Network settings configuration group is not sent to the modules. To send the configuration file, first establish a connection to one of the receiving modules. Log on and open the Config File Management dialogue via Config File > Upload. Click on Search (Durchsuchen). Select the relevant configuration file on your configuration PC. Check the Broadcast checkbox. Enter the first and last IP address of the relevant module group. The configuration will be sent to all the IP addresses between Start IP and Last IP. Enter the administrator password in the Password field and click on OK. IMPORTANT The password must be identical for all the modules. This is the case with the default setting (password = 3). Fig After confirming by clicking on OK the transfer will be started. When it has finished, the system will display a list of transferred (or skipped) configuration groups. 37

38 11 Information and log 11.1 Information dialogue General information about the module will be displayed in an information dialogue. Open the dialogue via About. Fig The following will be displayed: Type of module Version number of the recorder software Version number of the encoder Version number of the Linux kernel Serial number In addition, information about the installed hard disks and the Uptime will be displayed in the bottom section MAC adress The MAC address of the network interface is displayed in the Network settings dialogue. Open the Network settings dialogue via Common settings > Network. Fig

39 11.3 Event log Current errors are displayed as a list but they will not be saved. Open the Event log dialogue via Common settings > Event log. Fig Please note that a removed error will not be displayed after the modules reboot. 39

40 12 Breaking the connection After completing the configuration you should break the connection in controlled conditions. First log off the system by clicking on LOGOUT. The login page will be displayed: Fig Schließen Sie den Browser. NOTE If the connection is broken by closing the browser without clicking on LOGOUT, you must wait for five minutes before logging on again. 40

41 13 Cleaning and service 13.1 Cleaning The system should be installed in an air-conditioned and duct-controlled server room. This means that no cleaning is generally required. If, nevertheless, cleaning is required, wipe the housing (outside) with a dry, anti-static cloth. IMPORTANT Do not use cleansing agents or detergents. Some cleansing agents and detergents contain solvents that can damage the surface of your system Service If you replace a hard disk that the module has identified as defective, the new disk must be activated after the system has been started for the first time. This activation procedure is carried out in the HDD management configuration dialogue. To use this function, a so-called Day Password must be entered for security purposes. You can obtain this from the Dallmeier Support Team by quoting the serial number of the module. Fig Proceed as follows to activate the new hard disk: Log on to the module using a browser. Click on Service in the menu bar (on the left). Enter the day password in the login dialogue. The HDD management dialogue will appear: Fig Activate the checkbox. Click OK. 41

42 14 Technical data Operation mode Max. video decoder channels Supported cameras Decoding, recording, live-viewing/play-back 2x IP based channels IP cameras of Dallmeier and of third party, incl. megapixel and high definition cameras Supported video format MPEG-2 MPML, MPEG-4 ISO/IEC 14496, H.264 (H.264 in development) Supported audio formats Frame rate per decoder channel (HDTV) Up to 50 fps/60 fps Frame rate per decoder channel (SDTV) Resolution per decoder channel (HDTV) Resolution per decoder channel (SDTV) MPEG-1 Layer 2, G.722 (G.722 in development) 25 fps/30 fps 720p, 1080i, 1080p (1080p in development) 576p, 480p Interfaces Video outputs Audio outputs Ethernet Ethernet protocols Serial 2x HDMI, 2x CVBS/BNC 2x 3.5 mm phone jack (stereo) 2x RJ45, 10/100 Mbps Unicast: IPv4, TCP, HTTP, IGMP, DHCP, ARP, NTP, UDP Multicast: UDP, RTP, RTCP 2x RS485/RJ11 Further specifications Configuration Via web browser Exchangeable hard disks Up to 2x 3.5 Max. storage capacity Video norm Power consumption Up to 2 TB PAL/NTSC/HDTV Max. 50 W Voltage supply 12V DC +/- 5% Heating power Fan Dimensions W x H x D Weight Operating temperature Humidity Operating system Languages Applicability Area of use Approvals/certifications Max. 170 BTU/h 2x Approx. 425 x 44 (1HE) x 351 mm Approx. 1.5 kg 5-40 C 5-70% - not condensing Linux German, English, French, Spanish (others on request) In a 19 rack via a 19 bracket Control and server rooms CE 42

43 15 Pin assignment interfaces DCM-1 Video OUT (BNC) Audio OUT (3.5 mm phone jack) LAN (RJ45) Fig Video OUT (HDMI) Serial IO Serial IO Serial-IO is a RS232 interface. RS232 Connection assignment: PIN Function 1 GND 2 RX 3 w/o 4 w/o 5 TX 6 GND 43

44 16 Dimensions Fig Unit: mm 44