Data sheet. CI-TI TM Contactors and Motor Starters Contactors CI EI 520B1286

Size: px
Start display at page:

Download "Data sheet. CI-TI TM Contactors and Motor Starters Contactors CI EI 520B1286"

Transcription

1 CI-TI TM Contactors and Motor Starters June 2002 DKACT.PD.C00.I B1286

2 Introduction are intended for a.c. coil voltages and cover the power range kw. The largest types, CI 170 EI-420 EI have electronic control circuits that mean low holding power and wide coil voltage ranges on both 50 and 60 Hz. The EI version 170 EI is supplied with an integrated interface relay for PLC applications with 24V d.c. output. Accessories include a wide selection of clipon auxiliary contact blocks and timers. In addition, the range also includes thermal overload relays and an electronic motor protection relay for the protection of squirrelcage motors. Ordering Contactors CI EI Main circuit AC-3 load I th2 ) I the3 ) Aux. contacts Main in base module contacts 1 NO + 1 NC Code no. U e U e I e (AC-1) (AC-1) (make) Add-on 1 ) V V Open Encl. options kw kw A A A Number Number H3206 CI H3339 CI H3257 CI 170 EI H3259 CI 210 EI H3267 CI 250 EI H3269 CI 300 EI H3279 CI 420 EI 1 ) Coil voltage/frequency or Suffix no. (see table below) must be added to the Danfoss code no. 2 ) The thermal current value I th gives the maximum load at 40 C, which corresponds tho intalling the contactor in air (open). 3 ) The thermal current value I the gives the maximum load at 60 C, corresponding installing the contactor inside an enclosure. Coil voltages and coils for CI Coil voltage* Suffix no. Code no. 24 V, 50 Hz / 28 V, 60 Hz H V, 50 Hz / 24 V, 60 Hz H V, 50 Hz / 55 V 60 Hz H V, 50 Hz / 127 V, 60 Hz H V, 50 Hz / 110 V, 60 Hz H V, 50 Hz / 120 V, 60 Hz H V, 50 Hz / 208 V, 60 Hz H V, 50 Hz / 260 V, 60 Hz H V, 50 Hz / 220 V, 60 Hz H V, 50 Hz / 277 V, 60 Hz H V, 50 Hz / 240 V, 60 Hz H V, 50 Hz / 440, 60 Hz H V, 50 Hz / 480 V, 60 Hz H V, 50 Hz / 575 V, 60 Hz H5016 * Standard voltage tolerance -15%, +10% 2 DKACT.PD.C00.I2.02 Danfoss A/S

3 Coil voltages and coils for CI 170 EI-420 EI Coil voltage* Suffix no. Coils for Coils for Coils for CI 170 EI CI 210 EI-300 EI CI 420 EI V, 50/60 Hz H V, 50/60 Hz H V, 50/60 Hz H H V, 50/60 Hz H H V, 50/60 Hz H H3425 * Standard voltage tolerance -15% +10% Correct ordering of contactors Example: CI 170 EI for 24 V, 50 Hz coil voltage. Select one of the following two forms of ordering: Auxiliary contact block CBC for CI EI contactors 1.Danfoss code no. + Suffix no.: 037H or 2.Danfoss code no. + coil voltage/frequency: 037H3257, 24 V/50 Hz Load I e I th2 ) I the3 ) U e Contact function (AC - 15) (AC-1) (AC-1) Code no. Open Encl. A A A V 1 NO+1NC left hand side H3230 CBC-11 1 ) 1 NO+1NC right hand side H3231 CBC-11 1 ) 1 ) Force-actuated contacts suitable for safety switching. 2 ) The thermal current value I th gives the maximum load at 40 C, which corresponds tho intalling the contactor in air (open). 3 ) The thermal current value I the gives the maximum load at 60 C, corresponding installing the contactor inside an enclosure. CBC-11 Auxiliary contact block Accessories for contactors for CI EI Descriptiion Comments Code no. Mechanical interlock RCC-/ VRC- RC Element / varistor element Marking plate Terminal block for CI EI Terminal cover for CI EI Mech. interlock for CI EI Mech. interlock can be established between pairs 037H3232 Reduces overvoltage on de-energization of coils RC Element RCC 48 (24-48 V, 50/60 Hz) 037H3235 for CI RCC 240 ( V, 50/60 Hz) 037H3236 RCC 550 ( V, 50/60 Hz) 037H3237 Reduces overvoltage on de-energization of coils VRC-Varistor Element VRC 40 (24-28 V, Hz) 037H3238 VRC 75 (43-65 V, Hz) 037H3399 for CI EI VRC 460 ( V, Hz) 037H3407 VRC 550 ( V, Hz) 037H3241 For CI 105, type CI 105 HU (set of 3) 037H3240 UL-terminals For CI 141, CI 170 EI type CI 170 HU (1 pc.) 037H3249 For CI 210 EI-420 EI, type CI 420 HU (1 pc.) 037H3442 Finger protection of terminals: Transparent cover for CI 105 (set of 2) 037H3246 Transparent cover CI 141, CI 170 EI (set of 2) 037H3409 Terminal cover Transparent cover CI 210 EI-420 EI (set of 2) 037H3406 Terminal block for CI 105 (set of 2) 037H3244 Terminal block for CI 141, CI 170 EI (set of 2) 037H3247 Terminal block for CI 210 EI-420 EI (set of 2) 037H3404 Clip-on markers for CI 4 and CI EI Rating plate with cover (100-off) 037H3142 Contact set (complete) for CI H3228 Contact set (complete) for CI H3229 Contact set (complete) for CI H3357 Contact set (complete) for CI 140 EI 037H3233 Main contact set Contact set (complete) for CI 170 EI 037H3234 for CI EI Contact set (complete) for CI 210 EI 037H3400 Contact set (complete) for CI 250 EI 037H3401 Contact set (complete) for CI 300 EI 037H3402 Contact set (complete) for CI 420 EI 037H3403 Danfoss A/S DKACT.PD.C00.I2.02 3

4 Introduction Electronic motor protection relays TI 180 E and TI 630 E gives effective protection of electric motors exposed to thermal overload, phase failure and asymmetrical load. They therefore fulfil the requirements of IEC and IEC TI 180 E/630 E are compact units with builtin current transformers for the measurement of motor operating current. Other features: Trip range A, that can be reduced by loop to A or less. Trip range from A Galvanically isolated signal contact. Light emitting diodes for operating and protection functions. Connection for thermistor over temperature protection. TI 180 E can be mounted on backplate, 35 mm symmetrical DIN rail or direct on contactors CI EI via bus bars. Test and reset functions Ordering Electronic motor protection relay TI 180 E and TI 630 E Control voltage Range Manual reset U s D.O.L. Code no. Current rail set for CI EI Front cover for TI 180 E RRM Remote reset module for TI 180 E RRM Remote reset module for I 630 E IMR Indication module for TI 180 E, 630 E 24 V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz A 047H V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz A 047H V, 50/60 Hz 047H V, 50/60 Hz 047H V, 50/60 Hz 047H3036 With Y/D start, the motor full load current must be multiplied by 0.58 Accessories for motor protection relays TI 180 E-630 E TI 180 E TI 630 E Description Comments Code no. For direct mounting of motor protection relay TI 180 E Current rail set on contactors CI 105 (set of 3) 047H3027 For direct mounting of motor protection relay TI 180 E on contactors CI EI (set of 3) 047H3028 Front cover for motor protection relay TI 180 E (prevents tampering with settings on front) 047H3025 Finger protection of main terminals on TI 180 E and CI 105 Cover 037H3246 (set of 2) Finger protection of main terminals on TI 180 E and CI EI 047H3409 (set of 2) Finger protection of main terminals on TI 630 E and CI 210 EI-420 EI (set of 2) 037H3406 Indication module Indication and reset module for panel mounting (IP 54 from front). type IMR Inclusive 3 m connection cable, plugs and mounting fixture. 047H3023 for TI 180 E, 630 E Remote reset module type RRM For TI 180 E and TI 630 E 047H3024 DIN rail socket for RRM 037H3154 Used with TI 630 E and RRM Mounting plate for RRM 047H3120 Marking plate Marking plate with covers for TI 630 E (100 off) 037H3142 Marking plate for TI 630 E 4 DKACT.PD.C00.I2.02 Danfoss A/S

5 General Contactors, thermal overload relays and accessories are designed and tested in acc. w. IEC 947/EN Environment Temperate climate Tested and passed in acc. w. DIN and part 38 and IEC 68 Max. installation height: 2000 NN, in acc. w. IEC 947 Pulse voltage CI EI U imp 12 kv Ambient temperature Ambient temperature Operation Storage/Transport CI CI 420 EI 25 C +60 C 40 C +80 C Vibration and shock Tested and passed in accordance with IEC Vibration 1 ) Shock 2 ) CI EI 2 g, Hz 1 ) Operating conditions: All directions with de-energized coil. 2 ) Operating conditions: Parallel with armature and with de-energized coil Short circuit protection of contactors without thermal overload relay Max. fuse type gg at 3 x V Contactor type Short circuit co-ordinator type 1 Short circuit co-ordinator type 2 A A CI CI CI 170 EI CI 210 EI-250 EI CI 300 EI-420 EI CI EI TI 180E- 630E Danfoss A/S DKACT.PD.C00.I2.02 5

6 Rated life Electrical life Switching per hour Mechanical life AC-3 load AC-3 load Operations Operations Operations CI EI 10 x x Approvals Approval authority A S Product type EN CSA Canada UL-listed USA Lloyds Register of Shipping, UK Germanischer Lloyd, Germany Bureau Veritas France PTB CI 105 CI 141 CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI CBC- RCC- TI 180 E TI 630 E Approved No approval requirement No approval applied for 6 DKACT.PD.C00.I2.02 Danfoss A/S

7 Electrical life curve Contactors CI 105, CI 141,CI 170 EI, CI 210 EI/250 EI/300 EI/420 EI load categories AC-1, AC-3 A: Electrical life in millions of make/break operations B: Breaking current (A) Danfoss A/S DKACT.PD.C00.I2.02 7

8 Electrical life curve Contactors CI 105, CI 141, CI 170 EI, CI 210 EI/250 EI/300 EI/420 EI load categories 90% AC-3, 10% AC-4 A: Electrical life in millions of make/break operations B: Breaking current (A) 8 DKACT.PD.C00.I2.02 Danfoss A/S

9 Electrical life curve Contactors CI 105, CI 141, CI 170 EI, CI 210 EI/250 EI/300 EI/420 EI load category AC-4 A: Electrical life in millions of make/break operations B: Breaking current (A) Danfoss A/S DKACT.PD.C00.I2.02 9

10 TI 180 E E IEC, BS, AS, SEV, VDE V Main circuit Nominal CSA, UL 600 V voltage IEC V Control circuit SEV 380 V BS, AS, VDE V CSA, UL 240 V Test voltage Main circuit IEC kv a.c. for 1 min., Control circuit IEC kv a.c. for 1 min., Pulse voltage IEC SEN kv, 1.2/50 µs ANSI/C37.90a 1971 Noise voltage IEC kv, 1 MHz, 2 s SEN Setting range TI 180 E A TI 630 E A Supply Control ciruit Hz 24 V 110V V 240 V V 415 V Voltage tolerance a.c.: x U s, 50/60 Hz d.c.: U s Consumption a.c.: 2.5 VA/ 2 W d.c.: 2 W Max. power loss Measuring current circuit a.c.: 4.5 VA/ 4 W and supply d.c.: 4 W Remote reset External resistance V: 8.2 kω, 4 W V: 22 kω, 10 W Max. fuse TI 180E and TI 630E are short-circuit proof. Fuse size depends on contactor selection. See page 5 Operation C Ambient Intermittent operation C temperature Transport C Storage C Weather Temp./Relative humidity 40 C, 92% RH i 56 dg. resistance Temperature climate 23 C, 83% RH/ 40 C, 93% RH Vibration IEC 68 3 g, Hz Shock IEC / DIN 40046/7 30 g, shock pulse 11 ms, half-sinusoidal, in 3 direction (x, y, z) No. of contacts Control circuit 1 NO + 1 NC, galv. isolated Output relay Operating voltage [V] (125) I th [A] Max. current AC-15, cosϕ = 0.3 [A] DC-13, L/R = 35 ms [A] , (0.3) Inductive load UL 508, B 300 Pilot duty Max. control of gg 10 A, 500 V currnt fuse BS 88 type T 16 A, 250 V single core: mm Control circuit 2.5 mm 2 Connection with core sieve: mm mm 2 Main circuit mm 2 Max. PTC resistance value in circuit (cold condition) 1.5 kω Max. no. of PTC resistors (acc. to IEC ) 6 Thermistor Activation value υ A = C 3.3 kω overtemperature Reset value υ A = C 1.8 kω protection Activation value on short-circuit in sensor circuit υ A = C 15 Ω Cross section [mm 2 ] Max. cable length [m] Up to 100 m, screened cable not necessary 10 DKACT.PD.C00.I2.02 Danfoss A/S

11 PTC sensor characteristic in accordance with IEC TNF: Rated activation temperature Memory On voltage drop-out, the thermal overload relay remembers its condition (e.g. thermal cutout) for a period. When supply voltage is restored, the associated LED lights up. Memory period at 25 C approx. 30 min at 60 C approx. 5 min at 70 C approx. 1 min Accuracy Parameter Comments Tolerance Release range TI 180 E: A, changeable to A TI 630 E: A Function range: Ie incl. tolerance Release time 2-30 s in steps of 2 s Setting: 2 6 s ± 0.5 s, fra 8 30 s ± 10% Overload indication LED flash for thermal overload Setting: 110% I e ± 2% Phase drop-out Start: 1.5 s ± 0.5 s. Release times (differential protection) Operation: 3 s ± 1 s Asymmetry Standard versions : 40% Option: 20% eller 60% Test function Setting time (t 6 I e ) ± 20% Reset time Cool-off time (6 x set time) Application as secondary relay Used as a secondary relay, TI 180 E can also protect motors with full load currents higher than 180 A, and high-voltage motors for operating voltages higher than 1000 V. Recommended current transformer data: Min. operating voltage = rated motor operating voltage Min. primary current = motor operating current Class and overcurrent factor: 5 P 10 Secondary current No. of windings Rated current setting 5 A = (2.5-5) 8 1 A = (0.5-1) 40 2-phase current measurement 3-phase current measurement Danfoss A/S DKACT.PD.C00.I

12 Indication Operationally ready The green LED lights up when supply voltage is on. It goes out in the event of cut-out and voltage failure. The cause of cut-out is remembered up to 30 min after voltage failure. Asymmetric load On phase failure or more than 40% phase current asymmetry, the thermal overload relay cuts out - on starting within 1.5 s and during operation within 3 s. The cut-out condition is indicated by the red LED. Thermal overload If the current setting is exceeded by 110%, the red LED flashes. If the overload period exceeds the set release time, the thermal overload relay cuts out and the red LED lights up constantly. Thermistor overtemperature Thermistor overtemperature protection is used for motors with PTC sensors built into the windings. If PTC temperature sensors are connected, the resistors across terminals T1-T2 must be removed. If the permissible motor temperature is exceeded, or if the thermistor circuit is broken, the motor is cut out and the LED lights up. Setting The operating current can be set with the eight slide switches. TI 180 E Motor full load current 120 A Setting: Basic value = 120 A TI 630 E Motor full load current 580 A Setting: Basic value = 580A TI 180 E Example 1 TI 630 E Setting from 2.5 A to 20 A I e no. of motor lead windings Motor full load current: 8.7 A No. of motor lead windings: 4 Thermal overload relay setting: (8.7 x 4) = 34.8 (Basic value ) = 35 A With star-delta start, the motor full load current must be multiplied by a factor of The thermal overload relay setting is I e x Motor lead wound 2 times Example 2 Motor lead wound 4times 12 DKACT.PD.C00.I2.02 Danfoss A/S

13 Tripping graph, TI 180 E and TI 630 EI Explanation of tripping graph a) Time/current curve, cold condition, with max. tripping time 30 s. b) Time/current curve, cold condition, with normal tripping time 10 s. c) Time/current curve, cold condition, with min. tripping time 2 s. d) Time/current curve, warm condition, with max. and min. tripping time 30 s or 2 s. e) Time/current curve with normal tripping time 10 s. f) Interpolation example Start current (LRC) 8.5 x I e Permissible blocking time 17 s (from cold condition) The nearest time/current curve (a) is parallel displaced through intersection point (17 s; 8.5 x I e ). On intersection with the line 6 x I e, read off tripping time 25 s. The thermal overload relay must be set on the nearest lower value, i.e. 24 s. Example 3 Connection of remote reset Danfoss A/S DKACT.PD.C00.I

14 Contact symbols and terminal markings Auxiliary contacts Auxiliary contact (1 NO + 1 NC) CBC-11 Auxiliary contact (1 NO + 1 NC) CBC-11 Contactors Contactors CI 105/141 CI 170 EI/210 EI/250 EI/300 EI/420 EI Main circuit Connections, main contacts Multi core Recom- Single mended Connection method core without with Tightening terminal sleeve terminal sleeve torque [mm 2 ] [mm 2 ] [mm 2 ] [Nm] Screw and lug CI 105 Terminal block CI 141, CI 170 EI Screw and lug Terminal block CI 210 EI, CI 250 EI, Screw and lug CI 300 EI, CI 420 EI Terminal block Loads Direct start, load categories AC-2, AC-3, AC-4 Rated loads at Hz V 240 V V 415 V 500 V 690 V 1000 V CI 105 A ) kw ) CI 141 A ) ) kw ) CI 170 EI A kw CI 210 EI A ) kw ) CI 250 EI A ) kw ) CI 300 EI A ) kw ) CI 420 EI A ) kw ) ) Typical electrical life time 25% 14 DKACT.PD.C00.I2.02 Danfoss A/S

15 Table continued Star-delta start, load categories AC-2, AC-3 CI 105 CI 141 CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI Rated loads at Hz V 240 V V 415 V 500 V 690 V 1000 V A kw A kw A kw A kw A kw A kw A kw Three phase ohmic load, load category AC-1 Operating temperature max. 40 C (Open condition) V 240 V V 415 V 500 V 690 V 1000 V CI 105 A kw CI 141/CI 170 EI A kw CI 210 EI/ A CI 250 EI kw CI 300 EI A kw CI 420 EI A kw Three phase ohmic load, load category AC-1 Operating temperature max. 60 C (Enclosed condition) V 240 V V 415 V 500 V 690 V 1000 V CI 105 A kw CI 141/CI 170 EI A kw CI 210 EI/ A CI 250 EI kw CI 300 EI A kw CI 420 EI A kw Switching three phase power transformers (AC-6a) CI 105 CI 141 CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI Transformer load, (factor n = 30, inrush current = n x rated transformer current) V 240 V V 415 V 500 V 690 V 1000 V A kva A kva A kva A kva A kva A kva A kva Danfoss A/S DKACT.PD.C00.I

16 Switching lighting Incandescent lamps Fluorescent lamps, individually compensated Max. operat. current [A] at operat. temperature 1 ) A 40 C 60 C CI CI CI 170 EI CI 210 EI/250 EI CI 300 EI CI 420 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Switching capacitor loads, individual capacitors (AC-6b) Inductance in leads between capacitors connected in parallel min. 6 µh. Max. reactive power [kvar] V V 500 V 690 V 1000 V 40 C 60 C 40 C 60 C 40 C 60 C 40 C 60 C 40 C 60 C CI CI CI 170 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Switching capacitor loads, regulating capacitors (ac-6b) Inductance in leads between parallel-connected capacitors must be min. 6 µh Max. reactive power [kvar] V V 500 V 690 V 40 C 60 C 40 C 60 C 40 C 60 C 40 C 60 C CI CI CI 170 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Switching direct current load Load categories DC-3 and DC-5, contacts connected in series Max. operating current [A] DC-3, 3-pole in series DC-5, 3-pole in series 24 V 48 V 110 V 220 V 440 V 24 V 48 V 110 V 220 V 440 V CI CI 141/ 170 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Switching direct current load Load category DC-1, contacts connected in series Max. operating current [A] 24 V 48 V 110 V 220 V 440 V 1-pole 2-pole 3-pole 1-pole 2-pole 3-pole 1-pole 2-pole 3-pole 1-pole 2-pole 3-pole 1-pole 2-pole 3-pole CI CI 141/ 170 EI DKACT.PD.C00.I2.02 Danfoss A/S

17 Table (continued) Contact resistance and power losses Typical Power losses Coil Total power losses impedance all 3 poles consumption per pole AC-3 AC-1 a.c. AC-3 AC-1 m Ω W W W W W CI CI CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI Short time withstand current I cw Current transfer time in sec. Min cooling Short time withstand in Amps (I cw ) in min. CI CI CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI Control circuit Connections, auxiliary contacts Single and High capacity Tightening Connection method multi core without with torque terminal sleeve terminal sleeve [mm 2 ] [mm 2 ] [mm 2 ] [Nm] Coil terminals for CI 420 EI Screw and clamp washer Auxiliary contacts, load categories: AC-15 and AC-1 Max. driftstrøm [A] Comments AC-15 AC V V 415 V 500 V 690 V 40 C 1 ) 60 C 1 ) CBC- For contacts CI 105..CI 420 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Danfoss A/S DKACT.PD.C00.I

18 Auxiliary contacts, load categories DC-12, DC-13, DC-14 Max. operating current [A] Comments DC-12 DC-13 DC V 48 V 110 V 220 V 440 V 24 V 48 V 110 V 220 V 440 V 24 V 48 V 110 V 220 V 440 V CBC- For contacts CI CI 420 EI Coils, consumption and operating times Inrush power Holding power Pull-in voltage Drop-out voltage Make time Break time a.c. a.c. a.c. a.c. a.c. a.c. VA W VA W V V ms ms CI 105/CI ( ) U s ( ) U s CI 170 EI U min CI 300 EI U max U min CI 420 EI U min U max U min RC element (charge suppressor) Comments Overvoltage factor U max n = Un RCC Suitable for contactors CI VRC Suitable for contactors CI EI UL/ CSA specifications UL/CSA approved loads Motor load (AC-3) [hp] Other loads (AC-1) [A] 1-phase 3-phase UL CSA 115 V 230 V 200 V 240 V 460 V 575 V 40 C 1 ) 60 C 1 ) 40 C 1 ) 60 C 1 ) CI CI CI 170 EI CI 210 EI CI 250 EI CI 300 EI CI 420 EI ) 40 C is defined as non-enclosed installation 60 C is defined as enclosed installation Auxiliary contacts, UL/CSA-approved loads Load capacity Comments a.c. d.c. category VA category W CBC- For contactors CI 105..CI 420 EI A P Connections, main contacts Connection method Cross section Recommended tightening torque [AWG] [lb-in] Screw and lug 6-2/ CI 105 Terminal block top 6-1/ Terminalblock, bottom 6-3/ Screw and lug MCM CI 141, CI 170 EI Terminal block top 6-1/ Terminal block bottom MCM CI 210 EI, CI 250 EI Screw and lug MCM Terminal block top MCM CI 300 EI, CI 420 EI Terminal block bottom MCM DKACT.PD.C00.I2.02 Danfoss A/S

19 Dimensions Contactor CI 105 The mechanical interlock occupies no further space Contactor CI 105 built together with thermal overload relay TI Danfoss A/S DKACT.PD.C00.I

20 Dimensions (continued) Contactors CI EI Contactors CI EI built together with electronic motor protection relay TI 180 E 20 DKACT.PD.C00.I2.02 Danfoss A/S

21 Dimensions (continued) Contactors CI 210 EI-420 EI Contactors CI 210- EI-420 EI built together with electronic motor protection relay TI 630 E Danfoss A/S DKACT.PD.C00.I

22 Electronic motor protection relay TI 180 E-630 E Electronic motor protection relay TI 180 E Drilling dimensions TI 80 E with terminal cover TI 180 E with remote reset module RRM 22 DKACT.PD.C00.I2.02 Danfoss A/S

23 Electronic motor protection relay TI 180 E-630 E Remote reset module RRM for TI 180 E and TI 630E mounted on DIN rail adapter Indication module IMR for TI 180 E and TI 630 E Electronic motor protection relay TI 630 E Drilling dimensions Danfoss A/S DKACT.PD.C00.I

24 24 DKACT.PD.C00.I2.02 Danfoss A/S

AS09..S 3-pole Contactors - Spring Terminals

AS09..S 3-pole Contactors - Spring Terminals 4 kw 5 hp AS09..S 3-pole Contactors - Spring AC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Rail-mounted, no tools required, - Additional

More information

TeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40

TeSys contactors. Model d. Type of contactor LC1- LC1- LC1- LC1- LC1-D115 & D09 D18 D25 D38 D40 D50 D95 LC1-D150 DT20 & DT25 DT32 & DT40 Characteristics Type of contactor LC- LC- LC- LC- LC-D & D09 D8 D2 D38 D40 D0 D9 LC-D0 DT20 & DT2 DT32 & DT40 Environment Rated insulation voltage (Ui) Conforming to IEC 947-4-, overvoltage category III,

More information

PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories

PBC series. RoHS. Ready. IEC-Type Contactors & Accessories 9-80 Amp AC-3, Amp AC-1 AC Coils. P&B PBC Series IEC Type Contactors & Accessories PBC series IEC-Type Contactors & Accessories 9-80 Amp AC-3, 25-125 Amp AC-1 AC Coils File E38802 (PBC) RoHS Ready Users should thoroughly review the technical data before selecting a product part number.

More information

Minicontactorrelay,2NO/2NC,DCoperated

Minicontactorrelay,2NO/2NC,DCoperated Minicontactorrelay,2NO/2NC,DCoperated Partno. DILER-22-G(24VDC) Articleno. 010042 CatalogNo. XTRM10A22TD Deliveryprogramme Product range DILER Mini-contactors Application Contactor relays Connection technique

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control IEC Contactors and Starters. XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and

More information

Series CT7N Bimetallic Overload Relays

Series CT7N Bimetallic Overload Relays Series CT7N imetallic Overload Relays Choose CT7N overloads in DC applications and when monitoring Variable Frequency Drives Sprecher + Schuh has always paid particular attention to the subject of motor

More information

LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC

LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC Product datasheet Characteristics LC2D09E7 REVERSING CONTACTOR 575VAC 9A IEC Price* : 86.25 GBP Main Range Product name Product or component type Device short name Contactor application Utilisation category

More information

Type: DILM25 10(24V50HZ) Article No.:

Type: DILM25 10(24V50HZ) Article No.: Type: DILM25 10(24V50HZ) Article No.: 277119 Ordering information Rated operational current AC 3 400 V I e A 25 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,

More information

LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil

LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil Product datasheet Characteristics LC1D09FE7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Climatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC

Climatic proofing Damp heat, constant, to IEC Damp heat, cyclic, to IEC Deliveryprogramme Contactorrelay,3N/O+1N/C,AC Partno. DILER-31(230V50HZ,240V60HZ) Articleno. 051768 CatalogNo. XTRM10A31F Product range DILER Mini-contactors Application Contactor relays Description with

More information

Type: DILM12 10(24VDC) Article No.:

Type: DILM12 10(24VDC) Article No.: Type: DILM12 10(24VDC) Article No.: 276845 Ordering information Rated operational current AC 3 400 V I e A 12 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors,

More information

LC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 80 A V AC 50/60 Hz coil

LC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 80 A V AC 50/60 Hz coil Product datasheet Characteristics LC1D80F7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and a variety of related accessories.

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control . XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and a variety of related accessories.

More information

Bulletin 190 IEC Modular Starter System

Bulletin 190 IEC Modular Starter System Bulletin 90 Table of Contents Selection Guide Description Page Bulletin 90....................................... Accessories....................................... 7 Specifications.....................................

More information

LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil

LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil Product data sheet Characteristics LC1D50AF7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

LC1D25G7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A V AC coil

LC1D25G7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A V AC coil Product data sheet Characteristics LC1D25G7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

LC1D09B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC coil

LC1D09B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC coil Product data sheet Characteristics LC1D09B7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

LC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil

LC3D180AV7 TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A V AC coil Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 18 A - 400 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device

More information

LC1D150G7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A V AC coil

LC1D150G7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A V AC coil Product data sheet Characteristics LC1D150G7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

02/11/2015

02/11/2015 DIN Rail Mount 17.5 mm MUS/MUSF 80 AC/DC Part number 84872141 Control relays monitoring their own power supply - MUS : Over/undervoltage control Selectable latching (memory) function - MUSF : Over/undervoltage

More information

LC3D115M7 TeSys D - star delta starter - 3 x 3P (3 NO) A V AC coil

LC3D115M7 TeSys D - star delta starter - 3 x 3P (3 NO) A V AC coil Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 115 A - 220 V AC coil Main Range Product name Product or component type Device short name Contactor application Utilisation category Device

More information

LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil

LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil Product data sheet Characteristics LC1D09F7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control . XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and a variety of related accessories.

More information

110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1)

110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1) 80 South Street 7596-726, TX Nacogdoches Phone: 96-569-79 Fax: 96-560-685 XTCE007B0A PH FVNR 7A IEC Contactor Eaton Corp Catalog Number XTCE007B0A Manufacturer Eaton Corp Description Magnetic Contactor,

More information

LC1D150B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A - 24 V AC 50/60 Hz coil

LC1D150B7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 150 A - 24 V AC 50/60 Hz coil Product data sheet Characteristics LC1D150B7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

Magnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A

Magnecraft General Purpose Relays 750R Series DPDT and 3DPT, 10 A and 3DPT, 10 A UL Listed when used with proper Magnecraft s The 750R series octal base, plug-in relays offer clear or full-feature covers with multiple mounting options and accessories. 750R 750R Full-Feature

More information

LC1D50AFE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil

LC1D50AFE7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 50 A V AC 50/60 Hz coil Product data sheet Characteristics LC1D50AFE7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control . XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and a variety of related accessories.

More information

and Refrigeration Institute). CAQ7 Capacitor Switching Contactors

and Refrigeration Institute). CAQ7 Capacitor Switching Contactors SSN9000 Series C7 Special Use designed and labeled for specific industrial applications Special Use Capacitor switching contactors HVC rated contactors NEM size labeled contactors Lighting contactors Hydraulic

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Magnetic and Hydraulic-Magnetic Circuit Breaker 850-... Description Single, two, three and four pole magnetic and hydraulic-magnetic circuit breakers with trip-free-mechanism and toggle or rocker actuation.

More information

LC1D09M7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil

LC1D09M7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A V AC coil Bảng thông số sản phẩm Đặc diểm LC1D09M7 TeSys D contactor - 3P(3 NO) - AC-3 -

More information

LC3D80B7 TeSys D - star delta starter - 3 x 3P (3 NO) - 80 A - 24 V AC coil

LC3D80B7 TeSys D - star delta starter - 3 x 3P (3 NO) - 80 A - 24 V AC coil Characteristics TeSys D - star delta starter - 3 x 3P (3 NO) - 80 A - 24 V AC coil Price* : 4058.00 USD has not been replaced. Please contact your customer care center for more information. Main Range

More information

High performance circuit breakers

High performance circuit breakers Series High performance Description The high performance MCB offers a compact solution to circuit protection. The devices are DIN rail mounted. The is available with application-specific trip characteristics

More information

Interface Relays and Optocouplers Product group picture

Interface Relays and Optocouplers Product group picture Interface Relays and Optocouplers Product group picture /1 ABB Catalog 2CDC 1 004 C0208 Interface Relays and Optocouplers Table of contents Interface Relays and Optocouplers Interface Relays and Optocouplers

More information

A V 50Hz / V 60Hz

A V 50Hz / V 60Hz A16-22-00 400-415V 50Hz / 415-440V 60Hz Products Low Voltage Products and Systems Control Products Contactors Block Contactors General Information Extended Product Type: A16-22-00 400-415V 50Hz / 415-440V

More information

and Refrigeration Institute). Hydraulic Elevator Wye-Delta Contactors

and Refrigeration Institute). Hydraulic Elevator Wye-Delta Contactors C7 Series C7 Special Use designed and labeled for specific industrial applications The C7 line includes a number of contactors designed and labeled for specific industrial applications. In most cases,

More information

Pluggable interface relays CR-M Miniature relays

Pluggable interface relays CR-M Miniature relays 2CDC 293 035 F0004 CR-M 1 2 4 3 5 Features Standard miniature relays with mechanical status indication 12 different supply voltages: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions:

More information

Soft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit

Soft starter, 66 A, V AC, Us= 24 V DC, with control unit, Frame size N. Function Soft starter for three-phase loads, with control unit DATASHEET - S811+N66N3S Delivery program Soft starter, 66 A, 200-600 V AC, Us= 24 V DC, with control unit, Frame size N Part no. S811+N66N3S Catalog No. 168978 Eaton Catalog No. S811PLUSN66N3S EL-Nummer

More information

Datasheet - SRB301LC 24VAC/DC

Datasheet - SRB301LC 24VAC/DC 25.02.2016-18:05:23h Datasheet - SRB301LC 24VAC/DC Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB301LC Preferred

More information

with handle LIMOGES Cedex 1. DESCRIPTION - USE 3. DIMENSIONS Symbol: Technology: Use:. For controlling a load remotely via a switch 2.

with handle LIMOGES Cedex 1. DESCRIPTION - USE 3. DIMENSIONS Symbol: Technology: Use:. For controlling a load remotely via a switch 2. 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 25A power contactors silent CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Dimensions... 1 4. Positioning - Connection...

More information

ALLEN BRADLEY TIMING RELAY

ALLEN BRADLEY TIMING RELAY ALLEN BRADLEY TIMING RELAY Configuration Details Product: 700-HS12BA1 Description: 700-HS General Purpose Square Base Timing Relay, On Delay Timer, 1.0 to 180 seconds, DPDT, 120V AC 50/60Hz CONTROL RELAY

More information

Ordering details. Approval. Classification

Ordering details. Approval. Classification Datasheet - SRB 301MC-24V Guard door monitors and Safety control modules for Emergency Stop applications / General Purpose safety controllers (Series PROTECT SRB) / SRB 301MC Fit for signal evaluation

More information

Magnecraft Power Relays

Magnecraft Power Relays Description DPST-NO, 30 A; DPDT, 30 A (NO) / 3 A (NC) Description The series power relays offer a small package size and features Class F insulation for a maximum coil temperature of 55 C (3 F). These

More information

Pluggable interface relays CR-M Miniature relays

Pluggable interface relays CR-M Miniature relays 2CDC 293 035 F0004 1 2 4 3 5 Features Standard miniature relays with mechanical status indication 12 different supply s: DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V AC versions: 24 V, 48 V,

More information

Type Contact form Model

Type Contact form Model Low Signal Relay G6A High sensitivity can be driven by digital circuits. Low-profile design allows use in.70 mm (0.50 in) PC board rack. Surge withstand meets FCC Part 68 regulation. Units can be mounted

More information

Kuhnke Technical Data. Contact Details

Kuhnke Technical Data. Contact Details Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have

More information

CT7N CT7 CT7K 4 6 CT TJ 4 6 CT7K TKK 6 10 CT TK 6 9 CT7K TKL

CT7N CT7 CT7K 4 6 CT TJ 4 6 CT7K TKK 6 10 CT TK 6 9 CT7K TKL Obsolete Overload Cross Reference Series CT7/CT7K to Cross Reference CT7 CT7K Directly Mounts to Contactor... Adjustment Catalog Adjustment Catalog Adjustment Catalog Code Code Range (A) Number Range (A)

More information

Series CDP2 Definite Purpose Contactors

Series CDP2 Definite Purpose Contactors Series CDP2 Definite Purpose Contactors High performance economical contactors for commercial applications up to 90 Sprecher + Schuh s Definite Purpose contactors are ideal for commercial applications

More information

Bulletin 100-G IEC Contactors

Bulletin 100-G IEC Contactors Bulletin G IEC Contactors 315...710 kw, 400V 350 900 Hp, 460/575V 3-Pole contactors 4th add-on neutral switching pole AC and DC control Horizontal and vertical interlocking Mechanical latching Meets IEC,

More information

Type: NZMN1 A100 Article No.: Sales text Circuit breaker3p systems/cable prot. Ordering information Number of poles

Type: NZMN1 A100 Article No.: Sales text Circuit breaker3p systems/cable prot. Ordering information Number of poles Type: NZMN1 A100 Article No.: 259085 Sales text Circuit breaker3p systems/cable prot. Ordering information Number of poles Description Rated current = rated uninterrupted current Setting range 3 pole I

More information

Modular pulse operated latching relay 16 A

Modular pulse operated latching relay 16 A 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Modular pulse operated latc / 05 / 07 / 08 / 10 / 11 / 12 / 14 / 16 / 20 and 927 00 / 49 CONTENTS PAGES 1. Description,

More information

Bulletin 100-G IEC Contactors

Bulletin 100-G IEC Contactors Bulletin 100-G IEC Contactors Bulletin 100 G IEC Contactors 315...710 kw, 400V 350 900 Hp, 460/575V 3-Pole contactors 4th add-on neutral switching pole AC and DC control Horizontal and vertical interlocking

More information

GV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A - screw clamp terminals. Main.

GV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A - screw clamp terminals. Main. Product data sheet Characteristics GV2ME06 TeSys GV2-Circuit breaker-thermal-magnetic - 1...1.6 A - screw clamp terminals Main Range Product name Device short name Product or component type Device application

More information

GV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A -screw clamp terminals. Main.

GV2ME. Product data sheet Characteristics. TeSys GV2-Circuit breaker-thermal-magnetic A -screw clamp terminals. Main. Product data sheet Characteristics GV2ME04 TeSys GV2-Circuit breaker-thermal-magnetic- 0.4...0.63 A -screw clamp terminals Main Range Product name Device short name Product or component type Device application

More information

Contactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122

Contactor 4 kw / 400 V with 3 Main Contacts and max. 4 Auxiliary Contacts Series 8510/122 www.stahl.de with 3 Main Contacts and max. 4 Auxiliary Contacts > Screw fastening version robust vibration resistant reliable > Corrosion resistant enclosure material > Easily accessible connection terminals

More information

Magnecraft General Purpose Relays 782 Power Series SPDT 20 A; DPDT 15 A

Magnecraft General Purpose Relays 782 Power Series SPDT 20 A; DPDT 15 A 72 Power Series SPDT 20 A; DPDT 15 A UL listed when used with proper Magnecraft sockets The 72 Plug-in Power relays offer clear or full-feature covers with multiple mounting options and accessories. Feature

More information

GV2ME. Main. Device short name. Device application

GV2ME. Main. Device short name. Device application Product datasheet Characteristics GV2ME32 TeSys GV2-Circuit breaker-thermal-magnetic - 24...32 A - screw clamp terminals Main Range Product name Device short name Product or component type Device application

More information

GV2P05. Main. Device short name. Device application

GV2P05. Main. Device short name. Device application Product datasheet Characteristics GV2P05 Main Range Product name Device short name Product or component type Device application Trip unit technology TeSys TeSys GV2 GV2P Circuit breaker Motor Thermal-magnetic

More information

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A

Protective function Systems, cable, selectivity and generator protection. i 2 t constant function: switchable. I r A Deliveryprogramme Circuitbreak.3pselect.protection Partno. Articleno. 265777 NZMH4-VE1600 Product range Circuit-breaker Protective function Systems, cable, selectivity and generator protection Standard/Approval

More information

Type Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US

Type Contact form Model Ag (Au clad) Standard DPDT G6A-274P-ST-US Low-sensitivity DPDT G6A-274P-ST40-US Low Signal Relay G6A Fullly Sealed Relay with High Impulse Withstand High sensitivity can be driven by digital circuits. Low-profile design allows use in 12.70 mm PC board rack. Surge withstand meets FCC

More information

GV2ME086 TeSys GV2 - Circuit breaker - thermal-magnetic A - lugs-ring terminals

GV2ME086 TeSys GV2 - Circuit breaker - thermal-magnetic A - lugs-ring terminals Product data sheet Characteristics GV2ME086 TeSys GV2 - Circuit breaker - thermal-magnetic - 2.5...4 A - lugs-ring terminals Main Range Product name Device short name Device application Trip unit technology

More information

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control IEC Contactors and Starters. XT Family of Contactors Contactors and Starters Product Description The Eaton XT contactors and starters includes nonreversing and reversing contactors, overload relays and

More information

GV3P80 TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink

GV3P80 TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink Characteristics TeSys GV3P thermal-magn motor circuit breaker 70-80A EverLink Main Range Product name Device short name Product or component type Device application Trip unit technology Complementary Poles

More information

Datasheet - SRB-E-201ST

Datasheet - SRB-E-201ST 27.04.2016-16:36:21h Datasheet - SRB-E-201ST Multi-function safety modules / SRB-E-201ST STOP 0 Function 1 oder 2-channel control Start button / Auto-start Monitoring two-hand control panels to EN 574

More information

Process transmitter RMA422

Process transmitter RMA422 Technical information TI072R/09/en Mat. No. 51001905 Process transmitter RMA422 Multifunctional 1-2 channel top hat DIN rail unit with intrinsically safe current input and loop power supply, alarm set

More information

Generator protection relay

Generator protection relay Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Off-the-shelf generator protection relay for small and medium sized power generators Three-phase time overcurrent and

More information

MIKRO POWER FACTOR CORRECTION COMPONENTS

MIKRO POWER FACTOR CORRECTION COMPONENTS MIKRO POWER FACTOR CORRECTION COMPONENTS MIKRO POWER FACTOR REGULATOR Steps 6, 8, 12, 14 Voltage 1 4V AC Frequency 0 and 60 Hz Detection method Displacement Power Factor Input current A Modes Automatic,

More information

POWER FACTOR CORRECTION

POWER FACTOR CORRECTION Main Catalogue 2015 POWER FACTOR CORRECTION POWER QUALITY ENERGY MANAGEMENT FRAKO Leading-edge quality for reliable power supply networks FRAKO's mission is to provide solutions that are designed and

More information

LED Driver Compact dimming

LED Driver Compact dimming Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250

More information

GV2ME. Main. Device short name. Device application

GV2ME. Main. Device short name. Device application Product datasheet Characteristics GV2ME10 Main Range Product name Device short name Product or component type Device application Trip unit technology TeSys TeSys GV2 GV2ME Circuit breaker Motor Thermal-magnetic

More information

Gamma instabus. Technical product information

Gamma instabus. Technical product information Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output

More information

Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/

Analog Input Module HART Ex i / I.S. Inputs, 8 Channels Type 9461/ > 8 channels for 2-wire HART transmitters > Intrinsically safe inputs Ex ia IIC > Galvanic separation between inputs and system > Open-circuit and short-circuit monitoring for each field circuit > Module

More information

I r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A I i = I n x. Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 Deliveryprogramme Circuitbr.,3pmotorprotection Partno. Articleno. 265784 NZMN4-ME875 Product range Circuit-breaker Protective function Motor protection Standard/Approval IEC Installation type Fixed Release

More information

Type Contact form Model PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US. Type Contact form Model

Type Contact form Model PCB SPDT G6E-134P-ST-US G6E-134PL-ST-US. Type Contact form Model Low Signal Relay G6E Subminiature 7.87 H x.1 W x 16 L mm (0.31 H x 0.3 W x 0.63 L in). High sensitivity with pick-up coil power of 8 mw. Surge withstand meets FCC Part 68 rule and Telcordia 2.5 kv Specifications.

More information

LED control gear Compact fixed output

LED control gear Compact fixed output Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000

More information

Single output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.

Single output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. RoHS Lead-Solder-Exemption Compliant New 3.3 V and 5 V Output Models Universal Input 85-264 VAC Industry-Standard Footprint: 7.0" x 4.3" x 1.97" (177.8 x 109.2 x 50.0 mm) Input Transient & ESD Compliance

More information

3.5. Control Relays and Timers. Contents. 9575H Series 3000 Type AA, AC and DC. General Purpose Relays Type AA

3.5. Control Relays and Timers. Contents. 9575H Series 3000 Type AA, AC and DC. General Purpose Relays Type AA .5 9575H Series 000 Relay Contents 9575H Series 000 Type AA, AC and DC Product Selection....................... Accessories............................ Technical Data and Specifications........... Dimensions............................

More information

Assembly. Front view. LEDs. Parametrization interface. Power Bus

Assembly. Front view. LEDs. Parametrization interface. Power Bus otation Speed Monitor Features Assembly 1-channel signal conditioner 2 V DC supply Input for 2- or -wire sensors Input frequency 10 mhz... 50 khz elay contact output Start-up override and restart inhibit

More information

Operating Instructions 07/2007 Edition. SINAMICS G130/G150 Line harmonics filter. sinamics

Operating Instructions 07/2007 Edition. SINAMICS G130/G150 Line harmonics filter. sinamics Operating Instructions 07/2007 Edition SINAMICS G130/G150 Line harmonics filter sinamics s Safety information 1 General 2 SINAMICS SINAMICS G130/G150 Operating Instructions Mechanical installation 3 Electrical

More information

Contactors. Agency approvals. UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B

Contactors. Agency approvals. UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B Contactors Applications Type DP provide high performance with flexibility and reliability, designed to match numerous applications including: Motors Power supplies Food service equipment Compressors Business

More information

AF-300 E11 Adjustable Frequency Drive

AF-300 E11 Adjustable Frequency Drive AF-300 E11 Adjustable Frequency Drive The AF-300 E11 adjustable frequency drive is GE s new generation of micro drives. GE recognized your need for a high-performance, full-featured compact drive and designed

More information

Selection guide siemens.com/sirius-modular-system

Selection guide siemens.com/sirius-modular-system SIRIUS modular system Selection guide siemens.com/sirius-modular-system Everything for the control cabinet: SIRIUS modular system Efficiently combined Advantages at a glance: Load feeders: easy to implement

More information

Circuit-Breakers for Motor Protection Series 8523/8

Circuit-Breakers for Motor Protection Series 8523/8 > Accessories Auxiliary contacts 1 NC + 1 NO or 2 NC + 2 NO Undervoltage trip Shunt release > Switch operation with knop > Secure switching > Clear switch setting indicator > Different current setting

More information

TeSys circuit-breakers

TeSys circuit-breakers Thermal-magnetic motor circuit-breakers type GV2-ME GV2-ME with pushbutton control and screw clamp terminals (1) Standard power ratings Setting Magnetic Reference Weight of -phase motors range tripping

More information

AC1036. Definite Purpose Contactors

AC1036. Definite Purpose Contactors Definite Purpose Contactors Definite purpose contactors Definite purpose Contactors Applications Type DP contactors provide high performance with flexibility and reliability, designed to match numerous

More information

Movable Contacts Heavy duty silver cadmium oxide composition to resist welding and contact erosion for greater reliability

Movable Contacts Heavy duty silver cadmium oxide composition to resist welding and contact erosion for greater reliability Compare These Features Built-in Shock bsorber Reduces contact bounce for longer life. Coil Dust Cover Keeps dust and dirt away from magnet and coil area. Coil Class B (1300 C Insulation System) with wide

More information

Linear flow controls VFC Linear flow controls with actuator IFC

Linear flow controls VFC Linear flow controls with actuator IFC Linear flow controls VFC Linear flow controls with actuator Product brochure GB 3 Edition 01.16 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 Actuators IC 20 or

More information

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100

I r A Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 DATASHEET - NZMH2-A100 Circuit-breaker, 3p, 100A Part no. NZMH2-A100 Catalog No. 259099 Similar to illustration Delivery program Product range Circuit-breaker Protective function System and cable protection

More information

Agency approvals UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B

Agency approvals UL 508 Guide No. NLDX2, File # E CE/Semko Certified EN :1991 IEC DP 30 C 3P - 1 /B 11 Applications Type DP provide high performance with flexibility and reliability, designed to match numerous applications including: Motors Power supplies Food service equipment Compressors Business machines

More information

SINCE 1989 Quality Products, Prompt Services, Trustful Relationships www.kmindustrialcorp.com KM Industrial Corporation has established itself as a trusted supplier of Electrical, Machinery and Industry

More information

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100

Description Set value in neutral conductor is synchronous with set value Ir of main pole. R.m.s. value measurement and thermal memory CSA 100 DATASHEET - NZMN3-4-AE400 Circuit-breaker, 4p, 400A Part no. NZMN3-4-AE400 Catalog No. 265891 Similar to illustration EL-Nummer (Norway) 0004358857 Delivery program Product range Circuit-breaker Protective

More information

Linear flow control with actuator IFC

Linear flow control with actuator IFC Linear flow control with actuator Product brochure GB 3 Edition 01.14 Linear relationship between adjustment angle and flow rate Large control ratio of 25:1 EC type-tested and certified Actuators IC 20

More information

EMC Solutions Noise filtering

EMC Solutions Noise filtering Power & Signal Quality TRABTECH EMC Solutions Noise filtering Interference-free power supply and signal transmission A permanent supply and safe data link are essential for the operational reliability

More information

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min

Weekly Time Switch. Rated time Time setting range Time division 24 hrs x 7 days 00:00 to 23:59 1min Weekly Time Switch Easy Programming with Large LCD Display and Interactive Functions Programming for 24 hrs x 7 days using just five switches. Sixteen program steps available. Power supply freely selectable

More information

1.1. Contactors and Starters... Contents Description Relays and Timers Catalog Number Selection... Product Selection...

1.1. Contactors and Starters... Contents Description Relays and Timers Catalog Number Selection... Product Selection... IEC ors and Starters. Contents Description Catalog Number Selection................ Product Selection....................... Accessories........................... Technical Data and Specifications..........

More information