Features. = +25 C, Vs = 5V, Vpd = 5V

Size: px
Start display at page:

Download "Features. = +25 C, Vs = 5V, Vpd = 5V"

Transcription

1 v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features Psat Output Power: +26 dbm > 4% PAE Output IP3: +36 dbm High Gain: 21 db Vs: +V Electrical Specifications, T A = +2 C, Vs = V, Vpd = V Ultra Small Package: MSOP8G General Description The HMC326MS8G & HMC326MS8GE are high efficiency GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC driver amplifiers which operate between 3. and 4. GHz. The amplifier is packaged in a low cost, surface mount 8 leaded package with an exposed base for improved RF and thermal performance. The amplifier provides 21 db of gain and +26 dbm of saturated power from a +V supply voltage. Power down capability is available to conserve current consumption when the amplifier is not in use. Internal circuit matching was optimized to provide greater than 4% PAE. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db Gain Variation Over Temperature.2.3 db / C Input Return Loss 12 db Output Return Loss 7 db Output Power for 1dB Compression (P1dB) dbm Saturated Output Power (Psat) 26 dbm Output Third Order Intercept (IP3) dbm Noise Figure db Supply Current (Icc) Vpd = V 1 ua Supply Current (Icc) Vpd = V ma Control Current (Ipd) 7 ma Switching Speed ton/toff 1 ns 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D

2 v1.117 AMPLIFIER, GHz Broadband Gain & Return Loss 2 Gain vs. Temperature 2 RESPONSE (db) P1dB vs. Temperature OUTPUT P1dB (dbm) S21 S11 S22 2 Output IP3 vs. Temperature 4 GAIN (db) Psat vs. Temperature Psat (dbm) Power 3. GHz 4 IP3 (dbm) Pout (dbm), Gain (db), PAE (%) Output Power (dbm) Gain (db) PAE (%) INPUT POWER (dbm) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D 2

3 v1.117 AMPLIFIER, GHz Input Return Loss vs. Temperature Output Return Loss vs. Temperature RETURN LOSS (db) Reverse Isolation vs. Temperature REVERSE ISOLATION (db) Gain, Power & Quiescent Supply Current vs. GHz 1 RETURN LOSS (db) Noise Figure vs. Temperature NOISE FIGURE (db) Additive Phase Noise Vs Offset Frequency, RF Frequency = 4 GHz, RF Input Power = 1 dbm (Psat) -9 GAIN (db), P1dB (dbm), Psat (dbm) PSAT Icc P1dB GAIN Icc (ma) PHASE NOISE (dbc/hz) Vpd (Vdc) K 1K 1K 1M 1M OFFSET FREQUENCY (Hz) 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D

4 v1.117 AMPLIFIER, GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) Control Voltage Range (Vpd) RF Input Power (RFIN)(Vs = Vpd = +Vdc) Outline Drawing +. Vdc +. Vdc +1 dbm Junction Temperature 1 C Continuous Pdiss (T = 8 C) (derate 14 mw/ C above 8 C) Thermal Resistance (junction to ground paddle).916 W 71 C/W Storage Temperature -6 to +1 C Operating Temperature -4 to +8 C ESD Sensitivity (HBM) PKG BSC Class 1A 4 TOP VIEW SIDE VIEW BSC 1.1 MAX.2 GAGE PLANE EXPOSED PAD BOTTOM VIEW 2.41 MAX END VIEW MAX COPLANARITY.6 REF COMPLIANT TO JEDEC STANDARDS MO-187-AA-T ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 1.78 MAX FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-4) Dimensions shown in millimeters A Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H326 HMC326MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H326 HMC326MS8GE RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 23 C [2] Max peak reflow temperature of 26 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D 4

5 v1.117 AMPLIFIER, GHz Evaluation PCB List of Materials for Evaluation PCB 1436 [1] Item J1 - J2 J3 C1 - C2 C3 C4 C L1 U1 PCB [2] Description PCB Mount SMA RF Connector 2mm DC Header 33 pf Capacitor, 63 Pkg..7 pf Capacitor, 63 Pkg. 3. pf Capacitor, 42 Pkg. 2.2 µf Capacitor, Tantalum 3.3 nh Inductor, 8 Pkg. HMC326MS8G / HMC326MS8GE Amplifier 1416 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 43, 1 mil thick, tr = 3.48 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D

6 v1.117 AMPLIFIER, GHz Application Circuit TL1 TL2 TL3 Impedance ohm ohm ohm Physical Length Electrical 3.7 GHz Measurement Center of package pin to center of capacitor C3. Center of capacitor C3 to center TL for inductor. Center of TL for inductor to edge of capacitor C4. PCB Material: 1 mil Rogers 43 or Arlon 2FR Recommended Component Values L1 C1 - C2 C3 C4 3.3 nh 33 pf.7 pf 3. pf C 2.2 µf For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA Phone: Order online at Application Support: Phone: 1-8-ANALOG-D 6

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1]

Features. = +25 C, Vdd = +7V, Idd = 820 ma [1] Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Functional Diagram Features Saturated

More information

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units v. DOWNCONVERTER, - GHz Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radios Features Conversion

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units HMCBLPE v.. -. GHz Typical Applications The HMCBLPE is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection:

More information

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v1.111 LO AMPLIFIER, 1.7-4. GHz Typical Applications The HMC215LP4 / HMC215LP4E is ideal for Wireless Infrastructure Applications: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM &

More information

Features. Parameter Min. Typ. Max. Units

Features. Parameter Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radios Military Radar, EW & ELINT Satellite Communications Features Conversion Gain: db Image Rejection: dbc Input Third-Order

More information

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH stm-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Features High Output Power: +21

More information

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1] v2.614 Typical Applications The HMC412AMS8G / HMC412AMS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features General Description Parameter Min. Typ. Max. Units Frequency

More information

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E

1.5 GHz to 4.5 GHz, GaAs, MMIC, Double Balanced Mixer HMC213BMS8E FEATURES Passive: no dc bias required Conversion loss: 1 db typical Input IP3: 21 dbm typical RoHS compliant, ultraminiature package: 8-lead MSOP APPLICATIONS Base stations Personal Computer Memory Card

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V

HMC485MS8G / 485MS8GE. Features OBSOLETE. = +25 C, LO = 0 dbm, IF = 200 MHz*, Vdd= 5V Typical Applications High Dynamic Range Infrastructure: GSM, GPRS & EDGE CDMA & W-CDMA Cable Modem Termination Systems Functional Diagram Features +34 dbm Input IP3 Conversion Loss: db Low LO Drive: -2

More information

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description

HMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description HMCBMSGE v1.1 Typical Applications The HMCBMSGE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features Conversion Loss: db Noise Figure: db LO to RF Isolation: db LO to

More information

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V* v3.1 LO AMPLIFIER, 7 - MHz Typical Applications The HMC684LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32

More information

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications Typical Applications The is ideal for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Sensors Functional Diagram Features High

More information

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units v1.514 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Features Passive: No DC Bias Required

More information

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A

6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773A FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input

More information

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

OBSOLETE HMC422MS8 / 422MS8E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram v4.712 Typical Applications The HMC422MS8 / HMC422MS8E is ideal for: MMDS & ISM Wireless Local Loop WirelessLAN Cellular Infrastructure Functional Diagram Electrical Specifications, T A = +2 C Features

More information

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B

10 GHz to 26 GHz, GaAs, MMIC, Double Balanced Mixer HMC260ALC3B Data Sheet FEATURES Passive; no dc bias required Conversion loss 8 db typical for 1 GHz to 18 GHz 9 db typical for 18 GHz to 26 GHz LO to RF isolation: 4 db Input IP3: 19 dbm typical for 18 GHz to 26 GHz

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The is ideal

More information

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Typical Applications The is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +38 dbm 8 db Conversion Loss @ 0 dbm LO Optimized

More information

HMC412MS8G / 412MS8GE

HMC412MS8G / 412MS8GE v.91 HMC4MS8G / 4MS8GE MIXER, 9. - 15. GHz Typical Applications The HMC4MS8G / HMC4MS8GE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Features Conversion Loss: 8. db Noise Figure: 8. db

More information

HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

HMC576LC3B MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications v2.514 Typical Applications The is suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram Features

More information

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A

GaAs, MMIC Fundamental Mixer, 2.5 GHz to 7.0 GHz HMC557A FEATURES Conversion loss: db LO to RF isolation: db LO to IF isolation: 3 db Input third-order intercept (IP3): 1 dbm Input second-order intercept (IP2): dbm LO port return loss: dbm RF port return loss:

More information

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications.

OBSOLETE HMC423MS8 / 423MS8E MIXERS - DBL-BAL - SMT. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Typical Applications The HMC423MS8 / HMC423MS8E is ideal for: Base Stations Portable Wireless CATV/DBS ISM Functional Diagram Electrical Specifications, T A = +25 C Features Integrated LO Amplifi er w/

More information

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref. HMC98LP5 / 98LP5E Typical Applications The HMC98LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Functional Diagram Features Ultra

More information

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V

Features. = +25 C, As a Function of LO Drive & Vdd. IF = 1 GHz LO = -4 dbm & Vdd = +4V v4.414 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Integrated LO Amplifier: -4

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.511 Typical Applications Features

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v4.414 Typical Applications Features

More information

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram

HMC581LP6 / 581LP6E MIXERS - SMT. HIGH IP3 RFIC DUAL DOWNCONVERTER, MHz. Typical Applications. Features. Functional Diagram Typical Applications The HMC1LP6 / HMC1LP6E is ideal for Wireless Infrastructure Applications: GSM, GPRS & EDGE CDMA & W-CDMA Cellular / 3G Infrastructure Functional Diagram Features +26 dbm Input IP3

More information

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz

HMC613LC4B POWER DETECTORS - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz v.54 HMC6LC4B AMPLIFIER (SDLVA),. - GHz Typical Applications The HMC6LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v4.514 HMC62LC4 Typical Applications The HMC62LC4 is ideal for: Point-to-Point Point-to-Multi-Point Radio WiMAX & Fixed Wireless VSAT Functional Diagram Features General Description Electrical Specifications,

More information

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter

Features OBSOLETE. LO = +19 dbm, IF = 100 MHz Parameter Typical Applications The HMC351S8 / HMC351S8E is ideal for: Cellular Basestations Cable Modems Fixed Wireless Access Systems Functional Diagram Electrical Specifications, T A = +25 C Features Conversion

More information

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz Typical Applications The HMC219AMS8 / HMC219AMS8E is ideal for: UNII & HiperLAN ISM Microwave Radios Functional Diagram Features Ultra Small Package: MSOP8 Conversion Loss: 8.5 db LO / RF Isolation: 25

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz v1.112 HMC27AS8 / 27AS8E BALANCED MIXER,.7-2. GHz Typical Applications The HMC27AS8 / HMC27AS8E is ideal for: Base Stations Cable Modems Portable Wireless Functional Diagram Features Conversion Loss: 9

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units v1.214 HMC163LP3E Typical Applications The HMC163LP3E is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Sensors Functional Diagram Features

More information

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram

OBSOLETE HMC908LC5 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT. GaAs MMIC I/Q DOWNCONVERTER 9-12 GHz. Typical Applications. Functional Diagram v3.1 HMC98LC Typical Applications The HMC98LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Maritime & Mobile Radio Functional Diagram

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz v.211 HMC22AMS8 / 22AMS8E Typical Applications Features The HMC22AMS8 / HMC22AMS8E is ideal for: Microwave Radios VSAT Functional Diagram Ultra Small Package: MSOP8 Conversion Loss: 8.5 db Wideband IF:

More information

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz Typical Applications Functional Diagram The HMC28AMS8 / HMC28AMS8E is ideal for: Base Stations PCMCIA Transceivers Cable Modems Portable Wireless Features Ultra Small Package: MSOP8 Conversion Loss: db

More information

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units v3.514 MIXER, 5.5-14. GHz Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features Passive Double Balanced

More information

CMD197C GHz Distributed Driver Amplifier

CMD197C GHz Distributed Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Pb-free RoHs compliant 4x4 mm SMT package Description The CMD197C4 is a wideband GaAs MMIC

More information

SUNSTAR 微波光电 TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER

SUNSTAR 微波光电   TEL: FAX: v HMC750LP4 / 750LP4E 12.5 Gbps LIMITING AMPLIFIER Typical Applications The HMC75LP4(E) is ideal for: OC-192 Receivers Gbps Ethernet Receivers Gbps Fiber Channel Receivers Broadband Test & Measurement Functional Diagram Features Electrical Specifications,

More information

HMC187AMS8 / 187AMS8E. Features OBSOLETE. = +25 C, As a Function of Drive Level

HMC187AMS8 / 187AMS8E. Features OBSOLETE. = +25 C, As a Function of Drive Level v.41 DOUBLER,.8-2. GHz INPUT Typical Applications Features The HMC187AMS8(E) is ideal for: Wireless Local Loop LMDS, VSAT, and Point-to-Point Radios UNII & HiperLAN Test Equipment Functional Diagram *

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v1.111 47 Analog Phase Shifter, Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 47 Phase Shift Low

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.514 MIXER, 5.5-14. GHz Typical

More information

HMC958LC5 HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description

HMC958LC5 HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description Typical Applications Features The HMC958LC5 is ideal for: SONET OC-192 and 1 GbE 16G Fiber Channel 4:1 Multiplexer Built-In Test Broadband Test & Measurement Functional Diagram Supports High Data Rates:

More information

Features. = +25 C, 50 Ohm System

Features. = +25 C, 50 Ohm System v.211 18 Analog Phase Shifter, 2-2 GHz Typical Applications The is ideal for: EW Receivers Military Radar Test Equipment Satellite Communications Beam Forming Modules Features Wide Bandwidth: 2-2 GHz 18

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.514 MIXER, 2.5-7. GHz Typical

More information

= +25 C, IF= 100 MHz, LO = +17 dbm*

= +25 C, IF= 100 MHz, LO = +17 dbm* v3.514 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use Functional Diagram Wide IF Bandwidth: DC - 3.5

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC148* Product Page Quick Links Last Content Update: 11/1/216 Comparable

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v3.514 Typical Applications Features The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 db LO to RF

More information

Features. = +25 C, As a Function of LO Drive

Features. = +25 C, As a Function of LO Drive Typical Applications v.411 The is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional Diagram Features Passive

More information

= +25 C, IF= 100 MHz, LO = +15 dbm*

= +25 C, IF= 100 MHz, LO = +15 dbm* v3.514 HMC52LC4 6-1 GHz Typical Applications Features The HMC52LC4 is ideal for: Point-to-Point and Point-to-Multi-Point Radio Digital Radio VSAT Functional Diagram Wide IF Bandwidth: DC - 3.5 GHz Image

More information

DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier DATASHEET ISL008 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL01 Data Sheet MMIC Silicon Bipolar Broadband Amplifier FN21 Rev 0.00 The ISL00, ISL007, ISL008 and ISL009, ISL0, ISL011

More information

Parameter Min. Typ. Max. Min. Typ. Max. Units

Parameter Min. Typ. Max. Min. Typ. Max. Units Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features db Conversion Gain Image Rejection:

More information

RFOUT/ VC2 31 C/W T L =85 C

RFOUT/ VC2 31 C/W T L =85 C 850MHz 1 Watt Power Amplifier with Active Bias SPA-2118(Z) 850MHz 1 WATT POWER AMPLIFIER WITH ACTIVE BIAS RoHS Compliant and Pb-Free Product (Z Part Number) Package: ESOP-8 Product Description RFMD s SPA-2118

More information

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units

The Hmc869LC5 is ideal for: Point-to-Point and Point-to-Multi-Point Radio. Parameter Min. Typ. Max. Units Typical Applications The Hmc86LC is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features Electrical Specifications, T

More information

DATASHEET ISL Features. Ordering Information. Applications. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier

DATASHEET ISL Features. Ordering Information. Applications. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier DATASHEET ISL551 MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL551 FN28 Rev. The ISL551 is a high performance gain block featuring a Darlington

More information

Features. = +25 C, As a Function of LO Drive. LO = +10 dbm IF = 100 MHz

Features. = +25 C, As a Function of LO Drive. LO = +10 dbm IF = 100 MHz v4.6 HMC218MS8 / 218MS8E Typical Applications The HMC218MS8 / HMC218MS8E is ideal for: Basestations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety

More information

Absolute Maximum Ratings Parameter Rating Unit Max Supply Current (I C1 ) at V CC typ. 150 ma Max Supply Current (I C2 ) at V CC typ. 750 ma Max Devic

Absolute Maximum Ratings Parameter Rating Unit Max Supply Current (I C1 ) at V CC typ. 150 ma Max Supply Current (I C2 ) at V CC typ. 750 ma Max Devic 850MHz 1 Watt Power Amplifier with Active Bias SPA2118Z 850MHz 1 WATT POWER AMPLIFIER WITH ACTIVE BIAS Package: Exposed Pad SOIC-8 Product Description RFMD s SPA2118Z is a high efficiency GaAs Heterojunction

More information

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 5 GHz The Big Deal Excellent Gain Flatness and Return Loss over 50-1000 MHz High IP3 vs. DC Power consumption Broadband High Dynamic Range without external

More information

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High IP3 High isolation Wide IF bandwidth Pb-free RoHs compliant 3x3 mm SMT package Description The CMD255C3 is a general purpose double balanced mixer

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 39.0 dbm @ 70 MHz Gain = 24 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 28 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 15.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage.

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage. 1.7~2.7GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +33.9 dbm Input IP3 8.3dB Conversion Loss Integrated LO Driver -2 to +4dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

Description. Specifications

Description. Specifications PW21 Wideband Block Features to 6MHz 21.4dB @ 7MHz P1dB 16.3dBm @ 23MHz OIP3 3.6dBm @ 19MHz Lead-free / Green / compliant SOT-89 Package Applications Base station / Repeater / Mobile / Automotive / Military

More information

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage 0.7~1.4GHz High IIP3 GaAs MMIC with Integrated LO AMP Device Features +31.7 dbm Input IP3 8.8dB Conversion Loss Integrated LO Driver -2 to +2dBm LO drive level Available 3.3V to 5V single voltage MSL 1,

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 43.0 dbm @ 70 MHz Gain = 17.5 db @ 70 MHz Output P1 db = 20.5 dbm @ 70 MHz 50 Ω Cascadable Patented temperature compensation Patented over voltage protection Lead-free/RoHS-compliant

More information

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD179C3 is a general purpose

More information

Features. Gain Variation Over Temperature db/ C

Features. Gain Variation Over Temperature db/ C v4.3 MODULE,. - 5 GHz Features Typical Applications The Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain:

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 30 dbm @ 1900 MHz Gain = 16.4 db @ 1900 MHz Output P1 db = 17 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

Features. = +25 C, IF= 100 MHz, LO= +13 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units Features Passive Double Balanced Topology High LO/RF Isolation: 48 db Low Conversion Loss: 7 db Wide IF Bandwidth: DC - GHz Robust 1,000V esd, Class 1C Typical Applications The is ideal for: Point-to-Point

More information

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description CMD18C3 2-32 GHz Fundamental Mixer Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description

More information

TGA2218-SM GHz 12 W GaN Power Amplifier

TGA2218-SM GHz 12 W GaN Power Amplifier Applications Satellite Communications Data Link Radar Product Features Functional Block Diagram Frequency Range: 13.4 16.5 GHz PSAT: > 41 dbm (PIN = 18 dbm) PAE: > 29% (PIN = 18 dbm) Large Signal Gain:

More information

Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information

Power Amplifier 0.5 W 2.4 GHz AM TR Features. Functional Schematic. Description. Pin Configuration 1. Ordering Information Features Ideal for 802.11b ISM Applications Single Positive Supply Output Power 27.5 dbm 57% Typical Power Added Efficiency Downset MSOP-8 Package Description M/A-COM s is a 0.5 W, GaAs MMIC, power amplifier

More information

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. +5V. RFout. Absolute Maximum Ratings Device Features OIP3 = 41.5 dbm @ 500 MHz Gain = 27 db @ 140 MHz Output P1 db = 21 dbm @ 140 MHz NF = 2.7 @ 70MHz at Demo Board Product Description BeRex s BIG8 is a high performance InGaP/ GaAs HBT MMIC

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 44.0 dbm @ 70 MHz Gain = 20.3 db @ 70 MHz Output P1 db = 23.5 dbm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Product Description

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 19.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 7 dbm per tone separated by 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 32 dbm @ 1900 MHz Gain = 21.5 db @ 1900 MHz Output P1 db = 19 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description

CMD257C GHz High IP3 I/Q Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High IP3 Image rejection: 3 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The is a high IP3 I/Q mixer in a leadless surface

More information

GHz High Dynamic Range Amplifier

GHz High Dynamic Range Amplifier Features.2 to 6. GHz Range +41 dbm Output IP3 1.7 db db +23 dbm P1dB LGA Package Single Power Supply Single Input Matching The is a high dynamic range amplifier designed for applications operating within

More information

DC-6.0 GHz 1.0W Packaged HFET

DC-6.0 GHz 1.0W Packaged HFET Features 46. dbm OIP3 @.8 GHz 1. db Gain @ 2 GHz.0 db Gain @ 6 GHz 30.0 dbm P1dB SOT-89 Package Functional Block Diagram General Description The X is a high linearity Hetrojunction Field Effect Transistor

More information

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.55 Typical Applications The is

More information

Features. = +25 C, IF = 1 GHz, LO = +13 dbm*

Features. = +25 C, IF = 1 GHz, LO = +13 dbm* v.5 HMC56LM3 SMT MIXER, 24-4 GHz Typical Applications Features The HMC56LM3 is ideal for: Test Equipment & Sensors Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Functional Diagram

More information

MAMX Sub-Harmonic Pumped Mixer GHz Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1

MAMX Sub-Harmonic Pumped Mixer GHz Rev. V1. Functional Schematic. Features. Description. Pin Configuration 1 MAMX-119 Features Up or Down Frequency Mixer Low Conversion Loss: 11 db 2xLO & 3xLO Rejection: db RF Frequency: 14 - LO Frequency: 4-2 GHz IF Frequency: DC - 7 GHz Lead-Free 1.x1.2 mm 6-lead TDFN Package

More information

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Wide IF bandwidth Passive double balanced topology Pb-free RoHs compliant 3x3 mm SMT package Description The CMD178C3 is a general purpose

More information

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings

2 OIP3 _ measured on two tones with a output power 8 dbm/ tone, F2 F1 = 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 41 dbm @ 14 MHz Gain = 2. db @ 14 MHz Output P1 db = 2. dbm @ 14 MHz NF = 2.7 @ 14MHz at Demo Board Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance 1

More information

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description

1 Watt High Linearity, High Gain InGaP HBT Amplifier. Product Description Product Features 18 24 MHz 24.7 db Gain +3 dbm P1dB +46 dbm Output IP3 +V Single Positive Supply Internal Active Bias Lead-free/ RoHS-compliant SOIC-8 & 4xmm DFN Package Applications Mobile Infrastructure

More information

CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description

CMD176P GHz 4-Bit Digital Phase Shifter. Features. Functional Block Diagram. Description Features Functional Block Diagram Low phase error Low insertion loss 36 phase shift, LSB = 22.5 Single bit positive logic Pb-free RoHs compliant 4x4 QFN package Description The CMD176P4 is a GaAs MMIC

More information

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 9 dbm per tone separated by 1 MHz. Absolute Maximum Ratings

Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 9 dbm per tone separated by 1 MHz. Absolute Maximum Ratings Device Features OIP3 = 35.5 dbm @ 1900 MHz Gain = 16 db @ 1900 MHz Output P1 db = 19.7 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

RF V W-CDMA BAND 2 LINEAR PA MODULE

RF V W-CDMA BAND 2 LINEAR PA MODULE 3 V W-CDMA BAND 2 LINEAR PA MODULE Package Style: Module, 10-Pin, 3 mm x 3 mm x 1.0 mm Features HSDPA and HSPA+ Compliant Low Voltage Positive Bias Supply (3.0 V to 4.35 V) +28.5 dbm Linear Output Power

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.0 dbm @ 1900 MHz Gain = 22.2 db @ 1900 MHz Output P1 db = 19.0 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description

CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description Features Functional Block Diagram Low conversion loss High isolation Image rejection: 26 db Wide IF bandwidth Pb-free RoHs compliant 4x4 mm SMT package Description The CMD183C4 is a compact I/Q mixer in

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 35 dbm @ 1900 MHz Gain = 13.3 db @ 1900 MHz Output P1 db = 18.5 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Lead-free/RoHS-compliant SOT-89 SMT package Product

More information

4W High Linearity InGaP HBT Amplifier. Product Description

4W High Linearity InGaP HBT Amplifier. Product Description AH42 Product Features 4 27 MHz +3.7 dbm P1dB -49 dbc ACLR @ 26 dbm db Gain @ 2 MHz 8 ma Quiescent Current + V Single Supply MTTF > 1 Years Lead-free/green/RoHS-compliant 12-pin 4xmm DFN Package Applications

More information

QPL GHz GaN LNA

QPL GHz GaN LNA General Description The is a wideband cascode low noise amplifier fabricated on Qorvo s 0.25um GaN on SiC production process. This cascode LNA is robust to 5W of input power with 17dB typical gain and

More information

HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram

HMC-C078. SDLVAs. Features. Typical Applications. General Description. Functional Diagram HMC-C8 v. MODULE w/ LIMITED RF OUTPUT, - GHz Typical Applications The HMC-C8 is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control

More information

Product Description. Ordering Information. GaAs HBT GaAs MESFET. InGaP HBT

Product Description. Ordering Information. GaAs HBT GaAs MESFET. InGaP HBT InGaP HBT MMIC Amplifier 5MHz to 3MHz RFGA244 InGaP HBT MMIC AMPLIFIER 5MHz TO 3MHz Package: SOT-89 Features Low Cost Broadband Gain Internally Matched Internal Active Bias No Dropping Resistor Single

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features 3 ~ 3.2V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-363 package Application: Driver Amplifier, Cellular, PCS, GSM, UMTS, WCDMA, Wireless

More information

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system. Device Features OIP3 = 32.5 dbm @ 1900 MHz Gain = 20.9 db @ 1900 MHz Output P1 db = 18.8 dbm @ 1900 MHz 50 Ω Cascadable Patented temperature compensation Patented Over Voltage Protection Circuit Lead-free/RoHS-compliant

More information

SKY LF: 698 to 915 MHz Low-Noise Power Amplifier Driver

SKY LF: 698 to 915 MHz Low-Noise Power Amplifier Driver DATA SHEET SKY65094-360LF: 698 to 915 MHz Low-Noise Power Amplifier Driver Applications 2.5G, 3G, 4G wireless infrastructure transceivers ISM band transmitters WCS fixed wireless 3GPP LTE Features Wideband

More information

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information

TGL2210-SM_EVB GHz 100 Watt VPIN Limiter. Product Overview. Key Features. Applications. Functional Block Diagram. Ordering Information .5 6 GHz Watt VPIN Limiter Product Overview The Qorvo is a high-power receive protection circuit (limiter) operating from.5-6ghz. Capable of withstanding up to W incident power levels, the allows < dbm

More information