GXP880 3Gb/s, HD and SD and ASI/DVB and SMPTE-310M 8x8 router and master cross-point board A SynCross product COPYRIGHT 2012 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.
Block Schematic & panel RS422 9-16 17-24 25-32 33-40 32 IN 32 OUT BPH25 -SDI INPUT 1/2 -SDI INPUT 3/4 -SDI INPUT 5/6 -SDI INPUT 7/8 ETHERNET (BPH25) RS422 (BPH26) -SDI OUTPUT 1/2 -SDI OUTPUT 3/4 -SDI OUTPUT 5/6 -SDI OUTPUT 7/8
Features The GXP880 is part of the SynCross system. SynCross is a Synapse based modular video routing system capable of switching 3Gb/s, HD and SD SDI signals, as well as compressed domain signals such as ASI/DVB and SSI/SMPTE-310. The SynCross routing system can populate Synapse frames from 1 slot with 8 in- and outputs (with the GXP880) up to 5 slots for a 40x40 routing solution. It is very simple to expand a SynCross system up to 40 in and outputs, both in electrical or fiber or a mix between optical and electrical. This system can be controlled over the Ethernet, Cortex Control Panels or Cortex. ACP, Ethernet and a RS422 port are available for control with automation systems. The GXP880 is the center part of the SynCross system and can be used standalone as an 8x8 router. Supports SDI, ASI/DVB, composite (SD), HDMI and SSI/SMPTE-310 Possible to integrate into other Synapse applications Expandable system starting from 8x8 up to a 40x40 router Square router and Non square router depending on amount of populated sfp cages Selectable test signal with ident System can run on two references. Both SD and HD at the same time Option to bypass reclocker for SMPTE-310 (19.4Mb/s) purposes DIN1.0/2.3`, LC fiber and/or HDMI connections Flexible types CVBS SDI HDMI output Three types of control Controllable with SW-P-08 protocol or Ethernet protocol (Subset) Control via ACP (Axon Command Protocol) commands i.e. Cortex or third party software Stand alone Assignable hardware panels Relegendable buttons through Cortex and stand alone CCP1601, CCP3201, CCP4801, CCP4800, CCP2410 Applications Video router for small applications Monitoring and master control applications with GDK-HDK series
Examples ELECTRICAL 2 ELECTRICAL OPTICAL 2 OPTICAL ELECTRICAL 2 OPTICAL OPTICAL 2 ELECTRICAL MIXED CWDM MIXED MIXED SD SD SD SD SD SD SD SD CWDM CWDM CWDM CWDM SD SD SD SD DUAL SFP CVBS SD SD CVBS IN 5 CVBS IN 6 CVBS OUT 1 CVBS OUT 2 CVBS OUT 3 CVBS OUT 4 CVBS OUT 5 CVBS OUT 6 CVBS OUT 7 CVBS OUT 8 CWDM CWDM CWDM CWDM DUAL SFP CVBS DUAL SFP CVBS CVBS OUT 1 CVBS OUT 2 CVBS OUT 3 CVBS OUT 4 CWDM CWDM CWDM CWDM Figure 10. some examples using the back panels with sfp modules
Ordering information Example ordering information: SCG0808S0: 8x8 SDI router (no frame) SCG0808S2: 8x8 SDI router in 2RU frame SCG0808F4: 8x8 fiber router in 4RU frame SCG0808F4S: 8x8 fiber router in 4RU SNMP-enabled frame For more details on the various router input and output options, up to 40x40, please contact AXON.
Specifications Inputs Standard 3Gb/s,HD and SD SDI: SMPTE424, SMPTE259M, SMPTE 292M, SMPTE-310M Number of Inputs 8 Connector Equalization Return Loss Outputs DIN1.0/2.3, HD BNC or fiber LC Typical maximum equalized length of Belden 1694A cable: 50m at 2.97Gb/s, 140m at 1.485Gb/s, and 350m at 270Mb/s > 15dB up to 3GHz Standard 3Gb/s,HD and SD SDI: SMPTE424, SMPTE259M, SMPTE 292M, SMPTE-310M Number of Outputs 8 Connector Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Wideband Jitter Serial control Connector Signal Level DIN1.0/2.3, HD BNC or fiber LC 800mV nominal 0V ±0.5V 135ps nominal < 10% of amplitude > 15dB up to 1.5GHz (typ.) > 10dB up to 3GHz (typ.) < 0.2UI (1 UI HD/3Gb/s) RS422 Data Rate 9600, 19200, 38400, 57600, 76800, 115200 Protocol SW-P-02 (Axon extended) Reference Input through RRC Number of Inputs 2 on SFR18, 2 on SFR08 and 1 on SFR04 Tri-level Bi-level Miscellaneous Weight SMPTE274M, SMPTE296M 600 mvp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop Approx. 250g Operating Temperature 0 C to +50 C Dimensions 137 x 296 x 20 mm (HxWxD) Electrical Voltage +24V to +30V Power 15W