CH-06TXN & RXN to CAT6 Transmitter & Receiver Operation Manual CH-06TXN&RXN
Revision History Version No Date Summary of Change RDV 20307 Preliminary Release Precaution Failure to follow the precautions described below may cause damage to the device and void the warranty. DO NOT open the case. Doing so will void the warranty. If you find problem with it, please return back to your retailer or seller who will assist you or provide you with solution. DO NOT use third-party AC adapter or power cord. Doing so may damage the device. DO NOT bump, jar or drop contents of the products as it may damage it and result in warranty void. DO NOT set any liquids or beverages on the drive as they may damage the device.
Table of Contents. Introduction....... 2. Applications....... 3. Package Contents.... 4. System Requirements....... 5. Features......... 6. Specifications........ 7. Operation Controls and Functions......... 7. Front Panel... 7.2 Rear Panel.... 8. Connection and Installation..... 9. Acronyms...... 2 3 3 3 4 6
. Introduction The transmitter and receiver is the right way to send your signal over long distances. Instead of using expensive cables, this device lets you use your existing CAT6 cables/sockets while also performing the same functions like transferring video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, all with a bandwidth up to 225MHz. And if that weren t enough, you can use your existing remote to control your device from over 30/45 m away through an IR blaster. If your looking for a way to extend an signal, then the Transmitter and Receiver is what you have been searching for. 2. Applications Showroom display Window display Home or individual display Commercial display Lecture room display 3. Package Contents Transmitter Receiver IR Eye Receiver cable IR Eye Blaster cable 5V DC power supply adaptor Operation Manual 4. System Requirements input source equipment, output displayer, 2 x CAT6 cables and source equipment s remote control. 5. Features Compliant with, HDCP. and DVI.0 standards. Supports digital video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio. Supports CAT6 cables for data/ transmission. Equalizes and recovers incoming TMDS data before re-transmitting it in high quality, regardless of the incoming signal quality. Supports high definition resolution, Cable distance testing showed that with 080p/8bits resolution the Input/Output source CAT6 can be up to 30/45 meters away. Supports CEC bypass and xvycc. Supports wide range of IR frequencyies from 30~50kHz.
6. Specifications Transmitter Receiver Input Cable Output Cable CAT6 Cable Power Supply Dimensions (mm) Weight(g) Chassis Material Silkscreen Color Operating Temperature Storage Temperature Relative Humidity Power Consumption x x IR Blaster x CAT6 Output Video x CAT6 Output x x IR Receiver x CAT6 Input for Video x CAT6 Input for 080p 8-bit (6M) 080p 8-bit (0M) 080p 8-bit (45M) x5v/2.6a DC (US/EU standards, CE/FCC/UL certified)) 78.5(W) x 72(D) x 30(H)/each 40/each Aluminum Silver 0 C ~ 40 C/32 F~04 F -20 C~C/-4 F~40 F 20~90% RH (non-condensing) 2.7w/TX, 3.2w/RX 2
7. Operation Controls and Functions 7. Front Panel 06TXN 06RXN IR INPUT POWER 5V POWER 5V OUTPUT IR Transmitter Receiver 2 3 input: Connect the input port to the or DVI output of your equipment such as a DVD/Blu Ray player or set-top-box. 2 Power: Plug the 5VDC power supply into the unit and connect the adaptor to an AC outlet. Only a power adaptor is required for both the Transmitter and Receiver boxes. Although the Receiver box can use power from the connected CAT6 and cables, it is recommended to use both side power to maintain a strong and stable signal. 3 output: Connect the output port to the or DVI input of your display such as an HDTV or HD monitor. 7.2 Rear Panel 06TXN 06RXN CAT6 OUTPUT CAT6 INPUT 2 output/input: Connect the output of the transmitter to the input of the receiver using a CAT6 cable. 2 Video output/input: Connect the video output of the transmitter to the video input of the receiver using a CAT6 cable. Note: A. Cable tested with CAT6E/23AWG/Solid, using cables of another type may result in a different operating distance. B. Equipment used in cable distance testing included: PS3 20G, 37" Philips 8 bit LCD TV and 37" Samsung 2 bit LCD TV. C. Figures provided in this manual are for reference only, actual performance may depend on the source and display used along with the type of cable. 3
8. Connection and Installation A B C CH-06RXN / CH-06RXN CLUX-CAT4H CLUX-CAT8H CLUX-22HC Cable IR Receiver Cable IR Receiver Cable CAT6 OUTPUT CAT6 OUTPUT 4 3m 3m 7m 3m 3m 7m.5m HD TV IR BLASTER HD TV HD TV AorBorC AorBorC 3m 3m 7m IR RECEIVER
IR Receiver IN OUT Cable CH-06TXN / CH-06TX DVD IN IR Blaster CAT6 OUTPUT AorBorC CLUX-H4CAT CLUX-H8CAT DVD CAT6 OUTPUT x3 HD TV AorBorC DVD CLUX-22HC IN CH-06TXN CH-06TX CLUX-H4CAT CLUX-H8CAT CMLUX-4H4CAT CLUX-22HC CAT6 IN CAT6 OUTPUT HD TV IR Blaster AorBorC Cable 3m 7m 3m.5m.5m IR BLASTER 3m 3m 7m IR RECEIVER.5m 5
Acronyms A Acronym CAT6 DVI ESD GND HDCP IR Complete Term Category 6 cable Digital Visual Interface Electrostatic Discharge Ground High-bandwidth Digital content protection High-Definition Multimedia Interface Infrared 6
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.tw 20307 MPM-CH06TXNRXN