Product Description LED production 2017
Product Description 01 Adhesive LED Display 02 Folding Screen 03 Glassesfree 3D
Product Description 01 Adhesive LED Display
Introduction of Adhesive LED Display The major advantage of our display screen is its light weight, thinness, high permeation ratio and it is easy to install. Glimm Adhesive LED Displays, we devote to meeting the global needs of LED Adhesive LED Displays. Adopting our specially designed bare chip (with no encapsulation), we install components on PCB board with high transparent rate. Through specially designed solid glue, the whole display unit is integrated into an optical lens base board, with a minimum thickness of less than1mm.
Seven Advantages of TIEGE Adhesive LED Displays Without the limit of size Window film, a single film module has a standardized length of 1 meter or 2 meters, the maximum length reaches 4 meters. According to the size of the glass, it can be cut into required length(e.g.,1.9m). Strong heat dissipation Stealth appearance Strong heat dissipation, improves the photoelectric conversion efficiency, reduces the failure rate of display, guarantees longer service life and decreases maintenance costs. Light emitting chip uses the micron-grade light source, protected by transparent, high temperature resistant and anti-static waterproof membrane. LED lights and drive IC is invisible from the appearance. Besides, no body structure and mask were installed. Safe and convenient The base board adopts optical lens, and the solid glue is specially designed, which guarantee the fireproof and uv-protective functions of LED screen. High permeation ratio The lighting source mounted on the glass has a permeation ratio of 86%, without affecting daily lighting. Wide view The overall horizon is 160-170 degrees, no dead angle and unbiased color when watching. The images are always seamless. Saving cost Do not need steel structure, do not need to change the appearance of the building, effectively reducing the transportation and installation costs.
Modules of Adhesive LED Display Category Model type Permeation ratio Applicable area( m2 ) Range of visibility (m) large pixel Small pixel series P10 80% 100 15 series P20 86% 200 20 series P3 53% 2 4 series P4 61% 20 6 series P5 50%&73% 30 8
Control box of Adhesive LED Display P3*6 P4*8 P5*10 P10*20 P20 Control box is used to load the adapter plate, different models of adapter plates have different sizes. One single control box can hold more than one small sized adapter plates, we will arrange control box with suitable size according to the height of the screen.
Assembly Instructions of Adhesive LED Display(sketch map) Module 1 Cable Module 2 Adhesive LED Display note: module 1 (including Luminous bare chip and bare wafer driver IC chip); module 2 consisting of receiving card and power supply)
Applications of Adhesive LED Display Model of the product: P3*6 glass sliding door Model of the product: P3*6 rear view window of coach Model of the product: P3*6 side door glass Model of the product: P3*6 Color of the product: black rear view window of taxi Model of the product: P3*6 side door glass Model of the product: P3*6 windscreen in subway station
Applications of Adhesive LED Display Model of the product: P3*6 side door glass Model of the product: P5*10 grand glass window Model of the product: P3*6 counter glass Model of the product: P5*10 glass display window Model of the product: P4*8 glass walls in reception room Model of the product: P10*20 Color of the product: black glass wall
Applications of Adhesive LED Display Model of the product: P3*6 glass hangtags Model of the product: P3*6 decorations indoors Model of the product:p10*20 glass fences Model of the product: P3*6 hangtags Model of the product: P20 Color of the product: blue glass wall Model of the product: P4*8 glass fences
Applications of Adhesive LED Display Model of the product:p10*20 walls of building Model of the product: P10*20 green belt Model of the product: P20 walls of building Model of the product: P10*20 glass canopy in squares Model of the product:p10*20 Color of the product: black walls of building Model of the product: P20 glass canopy in shopping malls
Applications of Adhesive LED Display Model of the product: P4*8 residential elevators Model of the product: P10*20 display window along streets Model of the product: P10*20 Color of the product: blue sightseeing elevators Model of the product: P10*20 elevators in shopping malls Model of the product: P20 Color of the product: copper walls of building Model of the product: P4*8 Color of the product: blue display window in shopping malls
Adhesive LED Display Installation Safe and convenient, just 1/40 of the traditional screen size, 1/60 of the traditional weight, do not need steel structure, do not need to change the appearance of buildings. What you have to do is just tearing open the centrifugal film on the glass.
Procedures for Adhesive LED Display Installation 1.Before formal installation, preliminary inspection of related tools and goods: unit module, the control bar, external power supply and network cable; 2.The glass should be clean before installation, pay attention to the surrounding environment; 3.Lay the display module flat and the signal connector should be connected; 4.Tear open the centrifugal membrane (there is a FRONT sign on the centrifugal membrane ); 5. Choose accurate installation location (big curtain wall installation should use calibration fixture), pay attention to the direction of the joint. There are directions to install power control boxes, the glass should be ensured to keep all signal connectors and electric boxes in the same direction; 6. Install signal power supply (if the extended one is needed, to install another signal power supply back-to-back), to ensure that the signal connectors on the screen can be connected to the electric box; 7. Connect the module and control box, according to the text alignment on the control bar, recheck and supply power electricity, and connect the external signal; 8. The screening is successful, take a comprehensive check of the waterproof membrane, the installation is complete. 1)Signal Transmission Connector 2) Power Transmission Connector 3) Cascade Connection 4) Adhesive LED Film Screen 5) Power Supply box 6)Signal-in 7)Concentrated Power Supply 8)DC Cable 9)Visual Processing Signal-out 10)AC Cable
Product Description 02 Folding Screen
Introduction of other interesting LED screens Folding screen is another new type LED display developed by our company, as the name implies, it is a screen which can 折叠屏是我公司研发的, 另一款 be folded. Three pieces of screen is a 新型 LED 显示屏, 如其名 可折叠式 group, every two groups, three groups or 显示屏 four groups can be folded into a matched flight case, which is convenient in transportation.
Characteristics and advantages of folding screen Easy to be folded Ultra-thinness and light in weight APP control Waterproof crash-proof The ability to be folded is the major difference of folding screen compared with traditional LED, which is also the biggest advantage. It is a quarter the size of traditional LED screen, saving more space in transportation and storage. Adopting standardized flight case, it is convenient in transportation. Our company independently researched and developed ultra-thin wireless integrated sound box. We adopt super-light and ultra-thin die-casting aluminum body, the thickness of all the machine panel is only 27 mm; transportation and installation process is greatly simplified. Through mobile phone APP independently developed by our own company, we realized the remote broadcasting and control of folding screen anywhere any time. IP65 material used in folding screen is waterproof and crash-proof, which has a very good protection to the screen and is convenient in daily cleaning.
Product Description Single folding screen unit Flight case (nine folding screen units can be loaded in it ) Display screen consisting of nine folding screen units (both the front and back of the screen) The white dotted line is the folding line, which can be arbitrarily folded
Instruction of components location
Application fields of folding screen 1)global exhibition for high-end enterprise; 2)high-end teaching, including remote education, scene interaction, assignment correction, etc.; 3)an alternative of projection and DLP in meeting room; 4)the banquet hall, hotel, home theater; 5)television, studio and all kinds of large shopping market; 6)The screen can also be used for large project. Folding screen units, with good heat dissipation, low failure rate and high precision, can be jointed together into larger screen.
THANK YOU! Glimm Display