PRJTPFL102-100 - inch PRJTPFL112-110 - inch PRJTPFL122-120 - inch Fixed Wall Mount Projector Screen Universal Home/Office Projector Viewing Display
Be sure to read this manual before use so you will know how to install it properly. After you have finished reading these documents, put them away in a safe place for future reference. The content of this manual and the specifications of the product it describes are subject to change without prior notice. Note that PyleUSA will accept no liability whatsoever for injuries and damages arising from incorrect use or handling that exceeds normal operating limits. IMPORTANT SAFETY INSTRUCTION Follow all installation instructions. Failing to do so, may lead to serious consequences. Screens must be installed in accordance with the instructions. Make sure that the wall mount projector is installed high enough so that there is no risk of people bumping their heads. If a sufficiently high installation cannot be made, be sure to take the necessary precautions when the projector is used. Ensure that the screen is mounted securely. Operate within specified temperature and humidity range Do not operate screen before it is installed on wall. Make sure that the operating voltage of the screen corresponds to your local voltage. Provide proper adult supervision when using the screen around children. We strongly suggest that this item should be fitted by a professional, we will not be held responsible for any loss, incidental or consequential damage. Do not install the projector in a location exposed to vibrations. After you have finished installation, keep this manual and accessories in a safe place for future reference. Small parts could be swallowed by children and pets and should be kept out of their reach. If your child swallows any small parts, consult a doctor immediately. Routine Inspections Like the projector, the wall mount unit should be inspected once a year. 1. Check that the screws in the wall mount unit and adjusted parts are not loose. 2. Check that the wall mount unit, adjusted parts and the set are not scarred or damaged. 2
INSTALLATION PROCEDURE 1. Open the carton and find the square hole at both end of the polyfoam. Take out the corner connector, hanging kit, Alan head screws, wrench, and springs. 2. Lay the longer frame and shorter frame on a neat and soft ground. Place the L-shape corner connector in the groove of both frames and join the two frames together by the corner connector. Make sure the direction of frame and connectors is correct. Drive the screws into the hole of connectors and make sure the frames are joined in a right angle and good tightness. 3. Stretch the screen and put the fiber glass tube respectively according to the length. Stretch the screen after the tubes are placed correctly. Put the screen in vertical direction and make sure the screen is centered in the frame. Use the spring hook to connect the hole on the frame and the hole on the screen. Remember to work the springs hook on the four corner of the frame first before you work on hooks elsewhere. (smaller hook of the spring for the frame and the bigger hook for screen.) 3
4. Install the backing bar between the upper frame and bottom frame. Slant the backing bar and put it in the groove of the frame before you adjust it to be vertical 5. Install the hanging kits on the wall with the expansion bolt. Make sure the two hangers are on the same horizontal line. Hang the screen on the hangers. 4
Screen Size White Display Screen Dimension Total Assembled Dimensions (L x W x H) PRJTPFL102 - PRJTPFL112 - PRJTPFL122 Fixed Wall Mount Projector Screen Universal Home/Office Projector Viewing Display PRJTPFL102 100 -inch (Diagonal) 87.0''x48.8''-inches (W x H) 91.0'' x 52.0'' x 1.2'' -inches Features: Fixed Wall Projector Screen Quick & Hassle-Free Setup Universal Wall Mounting, Flat Surface Installation Flat Leveled Display with Tension Spring Assembly Matte White Fabric HDTV Format Support Compatible Vivid Color Pickup: Quality Visual Reproduction Image & Video Capture Black Velvet Masking Border for Optimum Image Focus and Alignment Ideal for Home Theater, Office Presentation, School Classroom Applications What s in the Box: Projector Screen Wall Display Frame Screen Mounting Hardware Technical Specs: Screen Material: Engineered PVC Fabric Cloth Frame Material: Aluminum Matte Fabric Thickness: 0.5mm Projectors Viewing Angle: 160 Degree Display Ratio: 16:9 Gain: 1.2 Screen Color: Matte White Sold as: 1 PRJTPFL112 PRJTPFL122 110 -inch (Diagonal) 120 -inch (Diagonal) 96.0''x54.0''-inches (W x H) 100.0'' x 57.0'' x 1.2'' -inches 104.0''x58.7''-inches (W x H) 108.0'' x 62.2'' x 1.2'' -inches 5