LAB CODE 571- Issued Date: July, 11 Page : 1 of 11 Antenna Test Report Test Plan: Non-compliance with ISO175 Applicant Name: EGIGA TECHNOLOGIES CO LTD Manufacturer Name: EGIGA TECHNOLOGIES CO LTD / STOLLMANN E+V GmbH Product Name: Bluetooth Module Model Number: egm-a3(bluemod+b) Measurements performed at SGS Taiwan Ltd. Taipei, Taiwan Issued Date: July, 11 Prepared by: Jacob Chiou Name Date & Signature Distribution Engineer July, 11 Approved by: Nick Hsu Supervisor July, 11
LAB CODE 571- Page No.: of 11 Measurement System Information General Information Testing Condition: Temperature: 5±3 C Humidity: <8% Measurement Facility: Measurement Chamber: ETS-Lindgren 3D fully anechoic chamber and its measuring system (AMS5) Base Station Simulator: Agilent E5515C (or R&S CMU) ETS-Lindgren EMCO9 Auxiliary Ports RF Relay Switches Spectrum Analyzer: Agilent E445B Network Analyzer: Agilent E571C Spectrum Analyzer Communication Antenna on ceiling RF Relay Switch Mobile Phone Universal Radio Communication Tester Control PC Limiting Amplifier Measurement Antenna Communication Antenna on MAPS GPIB-Bus Fiber Optics for MAPS system MAPS Controller
LAB CODE 571- Page No.: 3 of 11 Measurements are performed in a ETS-Lindgren AMS5 3D fully anechoic test system. The test system includes a high-performance RF-shielded, rectangular anechoic chamber, a Multi-Axis Positioning System (MAPS), and EMQuest TM EMQ data acquisition and analysis software. The geometry of the setup is specified below for reference. Typical Setup for ETS-Lindgren AMS5: Instruments View Inside View
LAB CODE 571- Page No.: 4 of 11 Testing Laboratory: Identification of the Responsible Test Laboratory. OTA Laboratory: SGS Taiwan Ltd. Electronics & Communication Laboratory 5F, No.134, Wu Kung Road, Wuku Industrial zone, Taipei County, Taiwan 48, R.O.C. Telephone: +886 99 379 Fax: +886 98 488 Internet: http://www.tw.sgs.com Details of Applicant: Applicant s name: EGIGA TECHNOLOGIES CO LTD Applicant s address: 3F, No., Sec., Nanchang Rd., Jhongjheng District, 184Taipei, Taiwan Contact person: Jasen Ho/ GM Telephone: +886368135 Fax: +88636793 E-mail: Jasen@egigatek.com.tw Details of Manufacturer: Manufacturer s name: EGIGA TECHNOLOGIES CO LTD / STOLLMANN E+V GmbH Manufacturer s address: 3F, No., Sec., Nanchang Rd., Jhongjheng District, 184Taipei, Taiwan Contact person: Tony Kuan, CTO Telephone: +886368135 Fax: +88636793 E-mail: tony@egigatek.com.tw
Details of EUT: LAB CODE 571- Page No.: 5 of 11 Device Description: Bluetooth Module Device Manufacturer: EGIGA TECHNOLOGIES CO LTD / STOLLMANN E+V GmbH Device Model: egm-a3(bluemod+b) BD serial number: 85 A61D Hardware version: V1. Software version: V1.1 Frequency Band: 4MHz ~ 483.5MHz Modulation Type: GFSK Number of Channels: 79 Antenna: Internal antenna Duration of Tests: Sample Receive Date: 11-7-19 Test Starting Date: 11-7-19 Test Ending Date: 11-7-19 Report Issued Date: 11-7 Photographs of EUT: Front View Back View
LAB CODE 571- Page No.: 6 of 11 List of Equipment Equipment Summary Sheet Equipment Description Manufacturer Identification no. Current calibration date Next calibration date Base station Agilent E5515C 11/1/6 13/1/6 Spectrum analyzer Agilent E445B 11/7/1 1/7/1 Network analyzer Agilent E571C 1/9/6 11/9/6 Measurement software ETS-Lindgren EMQuest 1.8 N/A N/A Multi axis positioning system(mapstm) ETS-Lindgren EMCO 115 N/A N/A Multi axis positioning system(mapstm) ETS-Lindgren EMCO 11 N/A N/A MAPSTM controller ETS-Lindgren EMCO 9 N/A N/A Horn antenna ETS-Lindgren 3164-4 N/A N/A
Antenna Gain and Efficiency LAB CODE 571- Page No.: 7 of 11
Test Setup LAB CODE 571- Page No.: 8 of 11 - Front View - Side View Coordinate System The coordinate system is centered on the antenna of the EUT, with the +-axis pointing front side of the EUT (out of the picture), the +-axis pointing right side of the EUT (top side of the picture), and the +-axis pointing top side of the EUT (left side of the picture).
Antenna 3D Plot Matrix LAB CODE 571- Page No.: 9 of 11 All plots in this section show the total EIRP (EIRPθ + EIRPφ) with the +x-axis pointing out of the page, +y-axis pointing right, and +z-axis pointing up. EIRP (4 MHz) - 3D EIRP (41 MHz) 3D EIRP (4 MHz) - 3D EIRP (43 MHz)
EIRP (44 MHz) - 3D LAB CODE 571- Page No.: 1 of 11 EIRP (45 MHz) 3D EIRP (46 MHz) - 3D EIRP (47 MHz)
EIRP (48 MHz) - 3D LAB CODE 571- Page No.: 11 of 11 EIRP (49 MHz) EIRP (5 MHz) - 3D 4 End of Report