15dBm Triband Indoor Band Selective Repeater for Multiple Networks, Frequency Agile with Fixed Bandwidth ERSAFR3 series Repeaters are carrier grade 15dBm triple band indoor signal booster covering multiple networks within one unit. These triband boosters can provide 15dBm maximum output power and 65dB gain simultaneously for signals in 3 different bands, offering uninterrupted voice communication and consistent high data throughput in office, store, café shop and underground parking. The uplink and downlink frequencies are field programmable with fixed bandwidth preset at factory. This feature offers great flexibility for material planning, inventory control as well as cost effective solution for frequency re-banding. The customizable bands, high out of band compression, low spurious emission, low intermodulation, control and high energy efficiency design creates clear and green communication environment. Built-in AGC and ALC allow stable output power even when the mobile is close to the repeater, which protects the donor site from interruption. An Example of the Benefit of Using A Triband Repeater Frequency, MHz Canada US Band UL DL Carrier Network Carrier Network AT&T, T-Mobile, GSM, UMTS, B2 1850 1910 1930 1990 Telus GSM, UMTS Verizon HSPA+, FDD-LTE AT&T, Verizon, T- GSM, UMTS, B4 1710-1755 2110-2155 Telus LTE Mobile HSPA+, FDD-LTE GSM, UMTS, B5 824 849 869-894 Telus GSM, UMTS AT&T, US Cellular HSPA+, FDD-LTE The unit is housed by a compact and light alumina casting enclosure. The built-in LCD control panel allows the repeater operation frequencies and gains be configured and optimized easily on site without additional tool. Signal strength indicator and uplink and downlink input and output power readings help find donor signal source and set up the system in the field without additional equipment. Page 1 of 5
Support 3 different uplink/downlink bands simultaneously within one unit Uplink/downlink frequencies field programmable with fixed bandwidths preset at factory Built-in Saw filter provides high out of band rejection Built-in LCD control panel and signal strength indicator allow find donor signal source and set up the system on site without additional equipment Read the real-time uplink and downlink output power levels from the LCD control panel Automatic gain control provides stable output power even when the handheld is close to the repeater to minimize the interference to the donor site Auto turn off for self-oscillation protection. Configurable auto turn on or manual turn on when self-oscillation alarm is dismissed 15dBm maximum output power and 10, 13 dbm power versions available External 100-240VAC universal power supply Indoor wall mount Heatsink convection cooling and low power consumption Order Instruction: Please specify uplink and downlink bandwidths for each of the 3 bands in your order. Items Uplink Downlink Frequency Range (FL f FH) Fixed Bandwidth Center Frequency Adjustment Range Center Frequency Adjustment Step Output Power Gain Ripple The first band The second band The third band The first band(bw1) 1MHz BW1 Frequency Range 1MHz BW1 Frequency Range The second band(bw2) 1MHz BW2 Frequency Range 1MHz BW2 Frequency Range The third band(bw3) 1MHz BW3 Frequency Range 1MHz BW3 Frequency Range The first band FL+BW1/2, FH-BW1/2 FL+BW1/2, FH-BW1/2 The second band FL+BW2/2, FH-BW2/2 FL+BW1/2, FH-BW1/2 The third band FL+BW3/2, FH-BW3/2 FL+BW1/2, FH-BW1/2 The first band 0.5MHz 0.5MHz The second band 0.5MHz 0.5MHz The third band 0.5MHz 0.5MHz The first band 10±2 dbm 15±2 dbm The second band 10±2 dbm 15±2 dbm The third band 10±2 dbm 15±2 dbm The first band 60±2 db 65±2 db The second band 60±2 db 65±2 db The third band 60±2 db 65±2 db The first band 8 db 8 db The second band 7 db 7 db The third band 8 db 8 db Page 2 of 5
VSWR The first band 2.2 2.2 The second band 2.2 2.2 The third band 2.2 2.2 Max. Input Power Without Damage -10 dbm -10 dbm (The third band) ALC Active 10dB (The third band) Intermodulation Products Spurious Emission Noise Figure @ max. gain Time Delay Alarm The first band 2 db 2 db The second band 2 db 2 db The third band 2 db 2 db ± 600 KHz 40 db 45 db ± 1 MHz 35 db 35 db ± 600 KHz 40 db 45 db ± 1 MHz 35 db 35 db The First Band(CW) -36 dbm -36 dbm The Second Band(CW) -30 dbm -30 dbm The Third Band(CW) -30 dbm -30 dbm 9KHz~1GHz -36 dbm -36 dbm 1GHz~12.75GHz -30 dbm -30 dbm The First Band 7 db 7 db The Second Band 7 db 7 db The Third Band 7 db 7 db The First Band 5 μs 5 μs The Second Band 5 μs 5 μs The Third Band 5 μs 5 μs ALC not Active Green ALC Active 5-10dB Orange Alarm ALC not Active Green Page 3 of 5
ALC Active 5-10dB Orange Alarm Power Supply Power Consumption Dimensions Weight RF Connector Environment Conditions ALC not Active Green ALC Active 5-10dB Orange 100-240 VAC, 50Hz 30 W 12.80 x10.55 x4.72 (325mmx268mmx120mm) 26.46lb (12kg) N-Female IP40 Humidity < 90% Operating Temperature -10 -+55 Model Selection Guide ERSAFR3-138P15G65Sxx,yy,zz ERSAFR3-245P15G65Sxx,yy,zz ERSAFR3-358P15G65Sxx,yy,zz ERSAFR3-158P15G65Sxx,yy,zz ERSAFR3-248P15G65Sxx,yy,zz Band # Network UL (MHz) DL (MHz) B2, GSM, UMTS, LTE-FDD, CDMA200 BC1 1x/1xEV-DO, W-CDMA, HSPA, HSPA+ 1850-1910 1930-1990 B4 UMTS, LTE-FDD, W-CDMA, HSPA, HSPA+ 1710-1755 2110-2155 B2, BC1 GSM, UMTS, LTE-FDD, CDMA200 1x/1xEV-DO, W-CDMA, HSPA, HSPA+ 1850-1910 1930-1990 Page 4 of 5
ERSAFR3-178P15G65Sxx,yy,zz ERSAFR3-378P15G65Sxx,yy,zz B4 UMTS, LTE-FDD, W-CDMA, HSPA, HSPA+ 1710-1755 2110-2155 B7 LTE-FDD, W-CDMA, HSPA, HSPA+ 2500-2570 2620-2690 B7 LTE-FDD, W-CDMA, HSPA, HSPA+ 2500-2570 2620-2690 Abbreviation BC Band Class Xx,yy,zz Other Power Options Contact BW1, BW2,BW3: Factory preset bandwidth in MHz 10, 13 dbm sales@excelwavetechnologies.com Customer must specify exact bandwidths for each of the 3 bands in the order Page 5 of 5