Agilent T-1 3 /4 Super Ultra-Bright LED Lamps Data Sheet HLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223, HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515, HLMP-C523, HLMP-C615, HLMP-C623 Description These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A slight tint is added to the lens for easy color identification. This lamp has been designed with a 2 mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment. Features Very high intensity Exceptional uniformity Microtint lens for color identification Consistent viewability All colors: AlGaAs Red High Efficiency Red Yellow Orange Green Emerald Green 15 and 25 family Tape and reel options available Binned for color and intensity Applications Ideal for backlighting front panels* Used for lighting switches Adapted for indoor and outdoor signs
Selection Guide Part Number Luminous Intensity Iv (mcd) Color 2θ 1/2[1] Standoff Leads HLMP- Min. Max. DH AS AlGaAs 15 No C115 29. C115-Oxx 29. C115-OPxx 29. 1. Yes C117-OPxx 29. 1. 25 No C123 9.2 C123-Lxx 9.2 Red 15 No C215 138. C215-Mxx 138. C215-MNxx 138. 4. 25 No C223 9.2 C223-Lxx 9.2 C223-MNxx 138. 4. Yellow 15 No C315 147. C315-Lxx 147. C315-LMxx 147. 424. 25 No C323 96.2 C323-Kxx 96.2 C323-KLxx 96.2 294. Orange 15 No C415 138. C415-Mxx 138. C415-MDxx 138. C415-MNxx 138. 4. 25 No C423 9.2 C423-Lxx 9.2 C423-LMxx 9.2 276. Green 15 No C515 17. C515-Lxx 17. C515-LMxx 17. 49. 25 No C523 69.8 C523-Jxx 69.8 C523-KLxx 111.7 34. Emerald Green 15 No C615 17. C615-Gxx 17. 25 No C623 6.7 C623-Exx 6.7 2
Part Numbering System HLMP - C x xx - x x x xx Mechanical Options : Bulk 1: Tape & Reel, Crimped Leads 2: Tape & Reel, Straight Leads B2: Right Angle Housing, Even Leads UQ: Ammo Pack, Horizontal Leads Color Bin Options : Full Color Bin Distribution D: Color Bins 4 & 5 only Maximum Iv Bin Options : Open (No Maximum Limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle & Standoffs Options 15: 15 Degree, without Standoffs 17: 15 Degree, with Standoffs 23: 25 Degree, without Standoffs Color Options 1. AS AlGaAs Red 2. High Efficiency Red 3. Yellow 4. Orange 5. Green 6. Emerald Green Package Options C: T-1 3/4 (5 mm) 3
Package Dimensions 5. ±.2 (NOTE 1) (.197 ±.8) 5. ±.2 (.197 ±.8) 8.71 ±.2 (.343 ±.8) 1.14 ±.2 (.45 ±.8) 12.6 ±.18 (.496 ±.7) 8.71 ±.2 (.343 ±.8) 1.85 (.73) MAX. 1.14 ±.2 (.45 ±.8) 31.6 (1.244) MIN..7 (.28) MAX. 31.6 (1.244) MIN. 1.5 ±.15 (.59 ±.6) CATHODE LEAD CATHODE LEAD.7 (.28) MAX. 1. (.39) MIN..5 ±.1 SQ. TYP. (.2 ±.4) 1. (.39) MIN..5 ±.1 SQ. TYP. (.2 ±.4) CATHODE FLAT 5.8 ±.2 (.228 ±.8) 2.54 ±.38 (.1 ±.15) CATHODE FLAT 5.8 ±.2 (.228 ±.8) 2.54 ±.38 (.1 ±.15) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT.5 mm (.2 in.) DOWN THE LEADS. HLMP-Cx15 and HLMP-Cx23 HLMP-Cx17 Absolute Maximum Ratings at T A = 25 C High High DH AS Efficiency Performance AlGaAs Red and Green and Parameter Red Orange Yellow Emerald Green Units DC Forward Current [1] 3 3 2 3 ma Transient Forward Current [2] 5 5 5 5 ma (1 µsec Pulse) Reverse Voltage (Ir = 1 µa) 5 5 5 5 V LED Junction Temperature 11 11 11 11 C Operating Temperature Range 2 to +1 55 to +1 2 to +1 C Storage Temperature Range 55 to +1 C Wave Soldering Temperature 25 C for 3 seconds [1.59 mm (.63 in.) from body] Lead Solder Dipping Temperature 26 C for 5 seconds [1.59 mm (.63 in.) from body] Notes: 1. See Figure 5 for maximum current derating vs. ambient temperature. 2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond. 4
Electrical Characteristics at T A = 25 C Forward Reverse Capacitance Speed of Response Voltage Breakdown C (pf) Thermal τ s (ns) Vf (Volts) Vr (Volts) Vf = Resistance Time Constant @ If = 2 ma @ Ir = 1 µa f = 1 MHz Rθ J-PIN e -t/τs Part Number Typ. Max. Min. Typ. ( C/W) Typ. HLMP-C115 1.8 2.2 5 3 21 3 HLMP-C117 HLMP-C123 HLMP-C215 1.9 2.6 5 11 21 9 HLMP-C223 HLMP-C315 2.1 2.6 5 15 21 9 HLMP-C323 HLMP-C415 1.9 2.6 5 4 21 28 HLMP-C423 HLMP-C515 2.2 3. 5 18 21 26 HLMP-C523 HLMP-C615 2.2 3. 5 18 21 26 HLMP-C623 Optical Characteristics at T A = 25 C Luminous Color, Viewing Intensity Peak Dominant Angle Luminous Iv (mcd) Wavelength Wavelength 2θ 1/2 Efficacy @ 2 ma [1] λ peak (nm) λ d [2] (nm) (Degrees) [3] η v Part Number Min. Typ. Typ. Typ. Typ. (lm/w) HLMP-C115 29 6 645 637 11 8 HLMP-C117 HLMP-C123 9 2 26 HLMP-C215 138 3 635 626 17 145 9 17 23 HLMP-C315 146 3 583 585 17 5 96 17 25 HLMP-C415 138 3 6 62 17 38 9 17 23 HLMP-C515 17 3 568 57 2 595 69 17 28 HLMP-C615 17 45 558 56 2 656 6 27 28 Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, λ d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 2θ 1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. 5
1. EMERALD GREEN ORANGE TS AlGaAs RED DH As AlGaAs RED T A = 25 C RELATIVE INTENSITY.5 HIGH PERFORMANCE GREEN YELLOW HIGH EFFICIENCY RED 5 55 6 65 7 75 WAVELENGTH nm Figure 1. Relative intensity vs. wavelength. I F FORWARD CURRENT ma 3. 2. 1. 5. 2. 1. 5. 2. 1..5.2.1 DH As AlGaAs RED TS AlGaAs RED.5 1. 1.5 2. 2.5 3. 3.5 V F FORWARD VOLTAGE V I F FORWARD CURRENT ma 1 8 6 4 2 HIGH EFFICIENCY RED, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN HIGH PERFORMANCE GREEN, EMERALD GREEN HIGH EFFICIENCY RED/ORANGE YELLOW 1. 2. 3. 4. 5. V F FORWARD VOLTAGE V Figure 2. Forward current vs. forward voltage (non-resistor lamp). 5. 1.6 HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 2 ma) 2. 1..5.2.1.5.2 DH As AlGaAs RED TS AlGaAs RED RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 2 ma) 1.4 1.2 1..8.6.4.2.1.1.2.5 1 2 5 1 2 3 5 5 1 15 2 25 3 I F DC FORWARD CURRENT ma I DC DC CURRENT PER LED ma Figure 3. Relative luminous intensity vs. forward current. 6
RELATIVE EFFICIENCY (NORMALIZED AT 2 ma) 1.2 1..8.6.4.2 DH As AlGaAs RED η PEAK RELATIVE EFFICIENCY (NORMALIZED AT 2 ma) 1.3 1.2 1.1 1..9.8.7.6.5 HER, ORANGE, YELLOW, HIGH PERFORMANCE GREEN, EMERALD GREEN YELLOW EMERALD GREEN HIGH EFFICIENCY RED/ORANGE HIGH PERFORMANCE GREEN 1 2 5 1 2 3 I PEAK PEAK FORWARD CURRENT ma.4 1 2 3 4 5 6 7 8 9 I PEAK PEAK FORWARD CURRENT ma Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. 4 DH As AlGaAs RED 4 HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN I F FORWARD CURRENT ma 35 3 25 2 15 1 5 Rθ JA = 559 C/W Rθ JA = 689 C/W I F FORWARD CURRENT ma 35 3 25 2 15 1 5 HER, ORANGE, GREEN, EMERALD GREEN Rθ JA = 47 C/W Rθ JA = 3 C/W YELLOW Rθ JA = 75 C/W 2 4 6 8 1 2 4 6 8 1 T A AMBIENT TEMPERATURE C T A AMBIENT TEMPERATURE C Figure 5. Maximum forward dc current vs. ambient temperature. Derating based on T j MAX = 11 C. NORMALIZED LUMINOUS INTENSITY 1.9.8.7.6.5.4.3.2.1 45 4 35 3 25 2 15 1 5-5 -1-15 -2-25 -3-35 -4-45 ANGULAR DISPLACEMENT DEGREES Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family. 7
NORMALIZED LUMINOUS INTENSITY 1.9.8.7.6.5.4.3.2.1 45 4 35 3 25 2 15 1 5-5 -1-15 -2-25 -3-35 -4-45 ANGULAR DISPLACEMENT DEGREES Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family. Intensity Bin Limits Intensity Range (mcd) Color Bin Min. Max. L 11.5 162.4 M 162.4 234.6 N 234.6 34. O 34. 54. P 54. 85. Q 85. 12. R 12. 17. Red/Orange S 17. 24. T 24. 34. U 34. 49. V 49. 71. W 71. 12. X 12. 148. Y 148. 214. Z 214. 39. L 173.2 25. M 25. 36. N 36. 51. O 51. 8. P 8. 125. Yellow Q 125. 18. R 18. 29. S 29. 47. T 47. 72. U 72. 117. V 117. 18. W 18. 27. 8
Intensity Bin Limits, continued Intensity Range (mcd) Color Bin Min. Max. E 7.6 12. F 12. 19.1 G 19.1 3.7 H 3.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 21.1 L 21.1 289. Green/ M 289. 417. Emerald Green N 417. 68. O 68. 11. P 11. 18. Q 18. 27. R 27. 43. S 43. 68. T 68. 18. U 18. 16. V 16. 25. W 25. 4. Maximum tolerance for each bin limit is ± 18%. Color Categories Lambda (nm) Color Category # Min. Max. 6 561.5 564.5 5 564.5 567.5 Green 4 567.5 57.5 3 57.5 573.5 2 573.5 576.5 1 582. 584.5 3 584.5 587. Yellow 2 587. 589.5 4 589.5 592. 5 592. 593. 1 597. 599.5 2 599.5 62. 3 62. 64.5 Orange 4 64.5 67.5 5 67.5 61.5 6 61.5 613.5 7 613.5 616.5 8 616.5 619.5 Tolerance for each bin limit is ±.5 nm. 9
Mechanical Option Matrix Mechanical Option Code Definition Bulk Packaging, minimum increment 5 pcs/bag 1 Tape & Reel, crimped leads, minimum increment 13 pcs/bag 2 Tape & Reel, straight leads, minimum increment 13 pcs/bag B2 Right Angle Housing, even leads, minimum increment 5 pcs/bag UQ Ammo Pack, horizontal leads, in 1K minimum increment Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (8) 235-312 or (916) 788-6763 Europe: +49 () 6441 9246 China: 18 65 17 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 12-61-128 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 244 Taiwan: (+65) 6755 1843 Data subject to change. Copyright 24 Agilent Technologies, Inc. Obsoletes 5965-6165E November 11, 24 5988-2149EN