CMC STEEL MILLS PRODUCT GUIDE

Similar documents
Hot strip mill product dimensions Hot rolled Steel Strip

Unmatched Product Range Material Availability Manufacturing Capabilities Innovative Applications and Engineering Expertise

Scotch Heavy Duty Vinyl Electrical Tape 22

Linatron - M9 & M9A. Modular high-energy X-ray source. 2.0 Performance

Bolt-A-Plate. We Support You.

National Wire and Cable and National Cable Molding Headquarters Los Angeles California

Mounting Set ACCESSORIES

1.8 METER SERIES 1183 Az/El MOUNT ANTENNA SYSTEM

1000 / 500 TECHNICAL GUIDE INTRODUCING THE Q-LED GAMECHANGER SYSTEM THE LATEST LED TECHNOLOGY

TRAN-COR H. grain ORIENTED ELECTRICAL STEELS. Applications Potential. a significant increase in core loss.

SECTION [ ] [02730] WAX-COATED DECOMPOSED GRANITE SURFACING

Professionally Install Products Right the First Time. TOOL-CRIMP Radial Linear compression tool for BNC, F & RCA connectors

Section 8 FIBERLIGN Hardware for Aerial FTTP Applications

DL-AR2 Technical Specifications Universal HDMI Adapter Ring Rev

WIRE AND CABLE FIRE TESTS

PERFORMANCE SPECIFICATION SHEET

Features wideband, 10 to 500 MHz. Applications military, hi-rel applications stabilizing generator outputs reducing amplitude variations

INVISILED ACCESSORIES

RIPPLE TANK - projection, with strobe & kit

Flexible Cord. Inside this section

Eddy Current Probe System

Highlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors

StandardProducts DieCatalog

CARLITE grain orien TEd ELECTRICAL STEELS

INCH-POUND MIL-PRF-55629/21G 10 March 2010 SUPERSEDING MIL-PRF-55629/21F 21 September 2005 PERFORMANCE SPECIFICATION SHEET

The full range of performance

Wiring. Requirements

Standard Trench/Embankment Installation

Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore

MIL-C CLASS L COMPATIBILITY ORDERING INFORMATION

GUY-GRIP Dead-end NOMENCLATURE GENERAL INFORMATION SAFETY CONSIDERATIONS (440)

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

Tools Amphenol CTL Crimp Series

AMERICAN NATIONAL STANDARD

Applications protects low noise amplifiers and other devices from ESD or input power damage military, hi-rel applications

Underwater and decorative LED lighting solutions

Amphenol RF. Tools. Tools. Tools. Description. Tool Series

ACADEMIC SUCCESS CENTER THE COLLEGE AT BROCKPORT STATE UNIVERSITY OF NEW YORK PROJECT NO

Modular Expansion Cards

COILS COUPLING TABLE COILS/ELECTROPILOTS ELECTROPILOTS/SOLENOID VALVES. Electropilots. Coils. Solenoid valves G6 GL6.

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2)

Community Outdoor Distributed Engineered Full-Line Product Catalog

We give 5* YEARS FULL WARRANTY on our boards and provide 24H/7 Customer Support

GN Shaker Screen (API RP 13C Compliant, Third Party Test)

1. Update Software in Meter

TENSIONED ELPRO CONCEPT Motorized projection screen for wall or ceiling installations

color range 16.7 million (24-bit) additive RGB colors; continuously variable intensity output range High power colored LEDs Standard MR16 pins

TruePlate Structural Plate

I SERIES Compact 600 IC6-2082/96 HIGH OUTPUT DUAL 8-INCH TWO-WAY 90 x 60 INSTALLATION LOUDSPEAKER

CR Signals Price List (N Gauge & General) April 2010

nroads Fleet Full Size Lightbar Mid-Size Lightbar Mini Lightbar Beacons Accessories

Content BULK CABLES VIDEO CABLES AUDIO CABLES EXTENDERS USB CABLES ETHERNET CABLES VIDEO BALUNS CONNECTORS ADAPTERS PATCH PANELS & WALLPLATES TOOLS

Three Strategies for Creating Retail Stickiness

Device/PLC Connection Manuals

Lenntech GRUNDFOS DATA BOOKLET. CM 25. Horizontal, multistage centrifugal pumps 50/60 Hz

2014 Essentially Ellington Competition & Festival Recording and Application Guidelines

Photoelectric Sensors E3F2

SEEGNAL LED Signal luminaires featuring striking designs and clear communication.

Look No Further... Materials & Finishes. Specifically made for all your: Gigabit Ethernet, HDMI, USB 2.0/3.0 Needs! onnectors

CIRCOGRAPH. Non-Destructive Eddy Current Testing of Long Products such as Wires, Bars and Tubes

Continuous Flex Data Cable

MedicaLight SURGICAL AND EXAMINATION LIGHTING

2.4 METER SERIES 1250 ANTENNA SYSTEM

High performance circuit breakers

THE ULTIMATE IN PREMIUM CONNECTION

Ratios. How are the numbers in each ad compared? Which ads are most effective?

DOWNDRAFT SANDING TABLES

ADN-8126 JJTRON Display System

The oldest Broadcast Antenna Company in North America.

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

AUDIO/VIDEO CONNECTIVITY

I SERIES Point Source 800 IP8-1122/66 HIGH POWER 12-INCH TWO-WAY 60 x 60 INSTALLATION LOUDSPEAKER

POINTS POSITION INDICATOR PPI4

Reliability for all Laparoscopic Procedures

Flanders' Mechatronics Engineering Centre

LUMIPLUS SPOT- LIGHTS AND LAMPS

TWIN-PUMP. Dual line system. Designed to work all the day, every day in extreme condition and difficult environments

fiber copper rapidrun audio/video pc/computer Quiktron Connectivity Solutions

PJ PRODUCTION PRODUCT CATALOGUE DESIGN, DEVELOPMENT AND PRODUCTION OF OFFICE ACCESSORIES FOR MODERN WORKPLACES

Width Right (WR) Victory-LX 2-leg. Standard Price. Triumph-LX

Structural Plate Design Guide. 5 th Edition MULTI-PLATE. Aluminum Structural Plate. Aluminum Box Culvert SUPER-SPAN SUPER-PLATE.

110 Volt AC at 50 Hertz, 120 Volt AC at 60 Hertz. 20 Amp (UL Continuous), 7 Amp (AC-3), 22 Amp (AC-1)

Magnetic Sensor - Incremental EHP

The requirements for acquiring the product described herein shall consist of this specification sheet and FF-N-836.

Support Frame STB Technical Instruction Manual

Content. The brand walimex pro 4. Aptaris Universal XL 10. Aptaris Blackmagic Cinema 12. Aptaris Blackmagic Pocket 13.

TORK MODEL DWZ100A 1 CHANNEL DIGITAL TIME SWITCH

ECOQUIP 2 VAPOR ABRASIVE BLASTERS

DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, SOLDER OR WELDED FLANGE MOUNT, BAYONET COUPLING, SOLDER PIN CONTACT, CLASS H, SERIES 2

Magnum Panel Systems. UL1741 Interconnection System Equipment. The Powerful Difference

Building a MidiBox LCD Cable

Shaped for every bathroom

SERIES M Rx/Tx ANTENNA SYSTEM

What s essential is invisible to the eye* *(Le Petit Prince) Antoine de Saint-Exupéry

ELECTRIC SAWS. with most of current standards and directives, making RUBI electric saws the safest on the market.

JAMES A. FARLEY NATIONAL AIR MAIL WEEK MAY 15 21, 1938 FINDING GUIDE

CLD Series. CLD LED Surface Luminaire

1.1. IEC Contactors and Starters. Contents Description Relays and Timers... Miniature Controls... Contactors and Starters. XT IEC Power Control

TRAN-COR H-0 CARLITE H-0 CARLITE DR H-1 CARLITE H-1 CARLITE DR H-2 CARLITE H-2 CARLITE DR

Introduction. Introduction

Transcription:

CMC STEEL MILLS PRODUCT GUIDE

CMC S COMMITMENT We are committed to providing the highest level of customer service in our industry as well as providing a safe work environment for everyone in our organization. You can be sure that you are receiving the highest levels of quality, expertise and service when you work with our team. We look forward to serving you soon. CONTENTS 4 PRODUCT DETAILS - EQUAL ANGLES 5 PRODUCT DETAILS - UNEQUAL ANGLES 6 PRODUCT DETAILS - FLATS 8 PRODUCT DETAILS - CHANNELS 9 PRODUCT DETAILS - REBAR, SPOOLED REBAR, COILED REBAR, ROUNDS 10 PRODUCT DETAILS - SBQ ROUNDS, SQUARES 11 PRODUCT DETAILS - T-POST, WIRE ROD, MISC. 12 PRODUCT DETAILS - GRADES 11.01.2018 2

With 10 mills strategically located across the United States, we have the capabilities to meet your long steel products needs. Our state-of-the-art EAF mini and micro mill technology provides unmatched manufacturing quality and immediate access to a wide inventory of products nationwide. 3

4 EQUAL ANGLES 1 x1 x.109 1 x1 x 1/8 1 x1 x 3/16 1 x1 x 1/4 1-1/4 x 1-1/4 x.109 1-1/4 x 1-1/4 x 1/8 1-1/4 x 1-1/4 x 3/16 1-1/4 x 1-1/4 x 1/4 1-1/2 x 1-1/2 x.109 1-1/2 x 1-1/2 x 1/8 1-1/2 x 1-1/2 x 3/16 1-1/2 x 1-1/2 x 1/4 1-3/4 x 1-3/4 x 1/8 + 1-3/4 x 1-3/4 x 3/16 1-3/4 x 1-3/4 x 1/4 + 2 x 2 x 1/8 2 x 2 x 3/16 2 x 2 x 1/4 2 x 2 x 5/16 2 x 2 x 3/8 2-1/2 x 2-1/2 x 3/16 2-1/2 x 2-1/2 x 1/4 2-1/2 x 2-1/2 x 5/16 + 2-1/2 x 2-1/2 x 3/8 2-1/2 x 2-1/2 x 1/2 3 x 3 x 3/16 3 x 3 x 1/4 3 x 3 x 5/16 3 x 3 x 3/8 3 x 3 x 1/2 3-1/2 x 3-1/2 x 1/4 3-1/2 x 3-1/2 x 5/16 3-1/2 x 3-1/2 x 3/8 3-1/2 x 3-1/2 x 1/2 4 x 4 x 1/4 4 x 4 x 5/16 4 x 4 x 3/8 4 x 4 x 7/16 4 x 4 x 1/2 4 x 4 x 5/8 4 x 4 x 3/4 5 x 5 x 5/16 * 5 x 5 x 3/8 * 5 x 5 x 7/16 5 x 5 x 1/2 * 5 x 5 x 5/8 5 x 5 x 3/4 5 x 5 x 7/8 6 x 6 x 5/16 * 6 x 6 x 3/8 * 6 x 6 x 7/16 6 x 6 x 1/2 * 6 x 6 x 5/8

EQUAL ANGLES 6 x 6 x 3/4 Continued 6 x 6 x 7/8 6 x 6 x 1 UNEQUAL ANGLES 2 x 1-1/2 x 1/8 2 x 1-1/2 x 3/16 2 x 1-1/2 x 1/4 2-1/2 x 2 x 3/16 2-1/2 x 2 x 1/4 3 x 2 x 3/16 3 x 2 x 1/4 3 x 2 x 3/8 3 x 2-1/2 x 3/16 3 x 2-1/2 x 1/4 3 x 2-1/2 x 5/16 3 x 2-1/2 x 3/8 3-1/2 x 2-1/2 x 1/4 3-1/2 x 2-1/2 x 5/16 3-1/2 x 2-1/2 x 3/8 3-1/2 x 2-1/2 x 1/2 3-1/2 x 3 x 1/4 3-1/2 x 3 x 5/16 3-1/2 x 3 x 3/8 3-1/2 x 3 x 1/2 4 x 3 x 1/4 4 x 3 x 5/16 4 x 3 x 3/8 4 x 3 x 1/2 4 x 3-1/2 x 1/4 4 x 3-1/2 x 5/16 4 x 3-1/2 x 3/8 4 x 3-1/2 x 1/2 5 x 3 x 1/4 5 x 3 x 5/16 5 x 3 x 3/8 5 x 3 x 1/2 5 x 3-1/2 x 1/4 * 5 x 3-1/2 x 5/16 * 5 x 3-1/2 x 3/8 * 5 x 3-1/2 x 1/2 6 x 3-1/2 x 5/16 * 6 x 3-1/2 x 3/8 * 6 x 3-1/2 x 1/2 6 x 4 x 5/16 * 6 x 4 x 3/8 * 6 x 4 x 1/2 * 6 x 4 x 5/8 6 x 4 x 3/4 7 x 4 x 3/8 * 7 x 4 x 1/2 * 5

FLATS 1 x 1/8 1 x 3/16 1 x 1/4 * 1-1/2 x 1/8 1-1/2 x 3/16 * 1-1/2 x 1/4 1-1/2 x 3/8 1-1/2 x 1/2 1-1/2 x 5/8 2 x 3/16 * 2 x 1/4 2 x 5/16 2 x 3/8 2 x 1/2 2 x 5/8 2 x 3/4 2 x 1 2-1/2 x 1/4 2-1/2 x 3/8 2-1/2 x 1/2 2-1/2 x 5/8 2-1/2 x 3/4 2-1/2 x 1 3 x 3/16 3 x 1/4 3 x 3/8 3 x 1/2 3 x 5/8 3 x 3/4 3 x 1 3 x 1-1/4 3 x 1-1/2 3 x 2 3-1/2 x 1/4 3-1/2 x 3/8 3-1/2 x 5/16 3-1/2 x 1/2 3-1/2 x 5/8 3-1/2 x 3/4 3-1/2 x 1 3-1/2 x 1-1/4 4 x 1/4 4 x 5/16 4 x 3/8 4 x 1/2 4 x 5/8 4 x 3/4 4 x 7/8 4 x 1 4 x 1-1/4 4 x 1-1/2 4 x 2 4-1/2 x 1/4 6

FLATS 4-1/2 x 3/8 Continued 4-1/2 x 1/2 4-1/2 x 5/8 4-1/2 x 3/4 4-1/2 x 1 5 x 1/4 5 x 5/16 + 5 x 3/8 5 x 7/16 5 x 1/2 5 x 5/8 + 5 x 3/4 5 x 7/8 5 x 1 5 x 1-1/4 5 x 1-1/2 5 x 2 5-1/2 x 3/8 5-1/2 x 5/16 5-1/2 x 1/2 5-1/2 x 3/4 5-1/2 x 1 6 x 1/4 6 x 5/16 6 x 3/8 6 x 7/16 6 x 1/2 6 x 5/8 6 x 3/4 6 x 7/8 6 x 1 6 x 1-1/4 6 x 1-1/2 6 x 2 6-1/2 x 1-1/4 7 x 1/4 7 x 5/16 7 x 3/8 * 7 x 7/16 7 x 1/2 * 7 x 5/8 7 x 3/4 * 7 x 7/8 7 x 1 7 x 1-1/4 7 x 1-1/2 8 x 1/4 * 8 x 5/16 * 8 x 3/8 * 8 x 7/16 8 x 1/2 * 8 x 5/8 * 8 x 3/4 * 7

FLATS 8 x 7/8 Continued 8 x 1 * 8 x 1-1/8 8 x 1-1/4 8 x 1-1/2 8 x 2 9 x 3/8 9 x 1/2 9 x 5/8 9 x 3/4 9 x 1 10 x 3/8 * 10 x 1/2 * 10 x 5/8 10 x 3/4 * 10 x 7/8 10 x 1 * 11 x 3/8 11 x 1/2 11 x 5/8 11 x 3/4 11 x 7/8 11 x 1 12 x 3/8 * 12 x 1/2 * 12 x 5/8 12 x 3/4 * 12 x 1 * CHANNELS 3 x 3.5 3 x 4.1 3 x 5 3 x 6 4 x 4.5 4 x 5.4 4 x 6.25 4 x 7.25 5 x 6.7 5 x 9 6 x 8.2 6 x 10.5 6 x 13 7 x 9.8 * 7 x 12.25 7 x 14.75 8 x 8.5 * 8 x 11.5 * 8 x 13.75 * 8 x 18.75 * 8

REBAR #3 (10MM) + 10MM (metric) #4 (13MM) + 15MM (metric) #5 (16MM) + #6 (19MM) + 20MM (metric) #7 (22MM) + #8 (25MM) 25MM (metric) #9 (29MM) #10 (32MM) #11 (36MM) #14 (43MM) #18 (57MM) SPOOLED REBAR #3 (10MM) #4 (13MM) #5 (16MM) #6 (19MM) COILED REBAR #3 (10MM) #4 (13MM) #5 (16MM) ROUNDS 1/2 9/16 5/8.680 11/16 + 3/4 +.797 13/16 + 7/8 +.910 1 1.025 1-1/8 1.150 1-1/4 1-3/8 + 1.383 1-1/2 1.613 1-5/8 1-3/4 1.848 2 2-1/4 2-1/2 2-3/4 9

ROUNDS 3 Continued 3-1/4 3-1/2 3-3/4 SBQ ROUNDS 1/2 + 9/16 + 5/8 +.680 + 11/16 + 3/4 +.797 + 13/16 + 7/8 +.910 + 1 + 1.025 + 1-1/8 + 1.150 + 1-1/4 + 1-3/8 + 1.383 + 1-1/2 + 1.613 + 1-3/4 + 1.848 + 2 + 2-1/4 + 2-1/2 + 2-3/4 + 3 + 3-1/4 + 3-1/2 + 3-3/4 + SQUARES 1/2 5/8 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 + 2-1/2 3 10

T-POST #0.85 #0.95 #1.25 + + #1.33 + + RUB RAIL 3/8 CHECKER LEG ANGLE 1/8 EARTHBAR 4MM 6MM 4 5 WIRE ROD COIL 7/32 1/4 9/32 19/64 5/16 11/32 3/8 13/32 7/16 1/2 11

GRADES CMC Steel Alabama CMC Steel Arizona CMC Steel Arkansas Bars & Structurals: ASTM A36; ASTM A529-50/55; ASTM A572-50/55; ASTM A588; ASTM A709-36/50; AISI 1010 TO 1090; AASHTO M270-36/50/50W; ABS GRADES A, B, AH32, AH36; Military MIL-S-22698 C, CLASS U - GRADE A, B, AH36; CANADIAN CSA G40.21 44W, 44WT, 50W, 50WT, 50A, 50AT; 1 SERIES BPS (CMC Proprietary Multi-Grade) T-Post: ASTM A702 Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A706-60; ASTM A706-80; CryoSTEEL (EN14620-3 Annex A3) Bars & Structurals: ASTM A36; ASTM A529-50; ASTM A572-50 T-Post: ASTM A702 Rebar: ASTM A615-40; ASTM A615-60 Bars & Structurals: ASTM A36; ASTM A529-50; ASTM A572-50 CMC Steel California Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A706-60; ASTM A706-80; ASTM A706-60/A615-60 (Dual) CMC Steel Florida Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A615-100; ASTM A706-60; ASTM A706-80; ASTM A615-60/A706-60 (Dual) Wire Rod: 1006; 1008; 1010; 1012; 1015; 1018; 1022 CMC Steel New Jersey Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A615-100; ASTM A706-60; ASTM A706-80 CMC Steel Oklahoma CMC Steel T-Post: ASTM A702 Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A706-60; ASTM A706-80 Spooled Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A706-60; ASTM A706-80 Spooled Rounds: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80 T-Post: ASTM A702 Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A615-100; ASTM A706-60; ASTM A706-80; ASTM A1035 CL; ASTM A1035 CM; ASTM A1035 CS Bars & Structurals: ASTM A36; ASTM A529-50/55; ASTM A572-50/55; ASTM A588; ASTM A709-36/50; AISI 1010 TO 090; AASHTO M270-36/50/50W; ABS GRADES A, B, AH32, AH36; Military MIL-S-22698 C, CLASS U - GRADE A, B, AH36; CANADIAN CSA G40.21 44W, 44WT, 50W, 50WT, 50A, 50AT; 1 SERIES BPS (CMC Proprietary Multi-Grade) CMC Steel Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A706-60; ASTM A706-80 CMC Steel Rebar: ASTM A615-40; ASTM A615-60; ASTM A615-75; ASTM A615-80; ASTM A615-100; ASTM A706-60; ASTM A706-80; ASTM A1035 CL; ASTM A1035 CM; ASTM A1035 CS Bars and Structurals: ASTM A36; ASTM A529-50/55; ASTM A572-50/55; ASTM A588; ASTM A709-36/50; AASHTO M270-36/50/50W; ABS GRADES A, B AH32, AH36; CLASS U - GRADE A, B, AH36; CANADIAN CSA G40.21 44W, 44WT, 50W, 50WT, 50A, 50AT; 1 SERIES BPS (CMC Proprietary Multi-Grade) SBQ Grades: AISI 1016 through 1070, 1117, 1137, 1157, 1541; SAE 4047, 4130, 4140 12

CMC STEEL SALES CONTACT INFORMATION CMC Steel Alabama Phone: 800.621.0262 Email: millsales-al@cmc.com CMC Steel Arizona Phone: 888.641.8956 Email: millsales-az@cmc.com CMC Steel Arkansas Phone: 800.258.0022 Email: millsales-ar@cmc.com CMC Steel California Phone: 909.646.7827 Email: millsales-ca@cmc.com CMC Steel Florida Phone: 888.870.0766 Email: millsales-fl@cmc.com CMC Steel New Jersey Phone: 888.870.0766 Email: millsales-nj@cmc.com CMC Steel Oklahoma Phone: 800.227.6489 Email: millsales-ok@cmc.com CMC Steel Phone: 800.621.0262 Email: millsales-sc@cmc.com CMC Steel Phone: 888.870.0766 Email: millsales-tn@cmc.com CMC Steel Phone: 800.227.6489 Email: millsales-tx@cmc.com RECYCLING MILLS FABRICATION WWW.CMC.COM

2024 © artsdocbox.com Privacy Policy | Terms of Service | Feedback