Owner s Manual L44* / W44* DIGITAL Series This standard owner s manual is designed to show you how to connect and tune in your Toshiba TV and to operate the most commonly used functions. During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance: If your TV is connected to the internet, firmware will be automatically made available. If your TV is not connected to the internet, you can download the latest version of firmware from www.toshiba-om.net/firmware.php If you want to view advanced functions for your TV you can do so by visiting www.toshiba-om.net Toshiba estimates that the initiative of making the advanced functions available online will save over, trees per year (6.5 Million Kg CO ). If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your local owner s manual Helpline number. Contact details are shown at the back of this book.
Safety Precautions... 4 Installation and Important Information... 5 Where to install... 5 When using a Wall Bracket... 5 Link)... 6 The Remote Control... 7 Inserting batteries and effective range of the remote... 7 Connecting External Equipment... 8 HDMI CEC Connections... Connecting an HDMI or DVI Device to the HDMI Input... To connect an HDMI device... To connect a DVI device... Connecting a Computer... Acceptable Video signals through HDMI terminals... 4 Acceptable PC signals through HDMI terminals... 4 Using the Controls... 5 Switching On... 5 Using the Remote Control... 5 Using the Controls on the TV... 5 Tuning the Television... 6 First Time Using... 6 Setting the Channels... Auto Tuning... Manual Tuning... Satellite Settings... 4 Automatic Power Down... 6 Reset TV... 6 DTV Settings... 7 Channels... 7 Subtitle and Audio... 8 Password... 8 Parental... 8 Standby Update Control... 9 Standby Channel Update... 9 Channel Grouping... 9 Contents Common Interface... 9 Data Transfer... Digital On-Screen Information and Programme Guide... Information... On-Screen Information Icons... Guide... General Controls... Selecting Channels... Stereo and Bilingual Transmissions... Quick Access Menu... Subtitles... Picture Still... Input Selection... Sound Controls... 4 Volume Controls and Mute Sound... 4 Dual... 4 Bass, Treble and Balance... 4 Stable Sound... 4 Dynamic Range Control... 4 Voice Enhancement... 4 Bass Boost... 5 Audio Level Offset... 5 Digital Audio Output... 5 Audio Description... 5 Widescreen Viewing... 6 Available Picture Size and Position Control... 7 Picture Controls... 8 Picture Position... 8 Picture Mode... 8 Picture Preferences... 8 Black/White Level... 9 Cinema Mode... 9 Colour Temperature... 9 Static Gamma... 9 Reset... 9 Active Backlight Control... 9 D Colour Management... 4 Base Colour Adjustment... 4 Digital Noise Reduction... 4 MPEG NR Noise Reduction... 4
Enjoy Photos through USB Port... 4 View Photo Files... 4 Using Slide Show... 4 Repeat Settings for Slideshow... 4 Set Interval Time... 4 Using the Play List... 4 Background Music... 4 Photo Info... 4 Enjoy Music through USB Port... 44 Play Music Files... 44 Repeat Settings... 45 Using the Play List... 45 Music Info... 45 Enjoy Videos through USB Port... 46 Play Video Files... 47 Repeat Settings... 48 Set... 48 Using the Play List... 48 Slow Forward... 48 Step Forward... 48 Video Info... 48 Aspect Ratio... 48 Picture Mode... 48 Goto Time... 48 HDMI CEC Control... 49 Equipment Control... 49 Select HDMI CEC Device... 49 HDMI CEC Menus... 5 One Touch Play... 5 System Standby... 5 System Audio Control... 5 Enable HDMI-LINK... 5 Auto Power On... 5 Auto Standby... 5... 5 Speaker Preference... 5 HDMI CEC Playback Device Control... 5 Using MHL TV Function... 5 Connecting an MHL-compatible Device... 5 MHL Control... 5 Operating an MHL-compatible Device... 54 USB HDD Record Function... 55 Connecting the USB HDD for recording... 56 Recording DTV Programmes... 56 View a Record Programme... 57 Protect a Record Programme... 57 Delete a Record Programme... 57 Sort Record Programmes... 57 USB HDD Capacity... 57 Select Device... 58 One Touch Recording Time... 58 Padding Time... 58 Device Test... 58 Format Device... 58 Scheduling Priority... 59 Preference Controls... 6 On Timer... 6 Sleep Timer... 6 EPG... 6 Panel Lock... 6 Auto Format (Widescreen)... 6 4: Stretch... 6 Blue Screen... 6 Side Panel... 6 DivX Registration... 6 DivX Deregistration... 6 System Information... 6 Software Upgrade... 6 Text Services and Text Information... 64 Setting the Modes... 64 Navigating Pages using Auto... 64 Navigating Pages using LIST... 64 Control Buttons... 64 PC Settings... 65 Horizontal and Vertical Position... 65 Horizontal Width... 65 Clock Phase... 65 Reset... 65 Input Signal Selection... 66 Input Signal Selection... 66 Frequently Asked Questions... 67... 69 License Information... 7
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. Air Circulation Leave more than cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND LIVE PARTS. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5 C (4 F) min. and 5 C (94 F) max. Mains Supply The mains supply required for this equipment is -4v AC 5Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. plug is approved by ASTA or BSI to BS6. It should only be replaced by a correctly rated and IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN. Do DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels on equipment. WARNING: To prevent injury, this apparatus must be securely attached to a solid base in accordance with the installation instructions. 4 Do Not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DO NOT allow electrical equipment to be exposed such as vases, to be placed on the equipment. DO NOT sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt WARNING: To prevent the spread of away from this product at all times. DO NOT legs with wood screws. To ensure complete safety, to the instructions. DO NOT leave equipment switched on when it it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities. DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way switch off, withdraw the mains plug and consult your dealer. WARNING excessive sound pressure from earphones or headphones can cause hearing loss. ABOVE ALL NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case. These actions will damage screen or internal parts. NEVER guess or take chances with electrical equipment of any kind it is better to be safe than sorry. THE MAINS PLUG IS USED AS THE DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
Installation and Important Information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV set on a stable, level surface that can support the weight of the TV. The LCD display panels are manufactured using an extremely high level of precision technology, however sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Make sure the television is located in a position it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case. Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damaged to TV and TV pedestal. Cleaning the screen and cabinet... Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. Two people are required for installation. To install a wall-mount from another manufacturer.. Unplug and remove any cables and/or other connections from the rear of the TV... Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 4. Always use the screws supplied or recommended by the wall mount manufacturer. Removing the Pedestal Stand:. ioned surface with the stand hanging over the edge.. Remove the screws.. After the screws are removed, hold the pedestal stand in place, then remove it from the TV by sliding away from the bottom of the TV. NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. W44* L/4L44* x 4 5
Interoperability with MHL devices of other manufacturers is not guaranteed. Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL source is connected to the TV. - No picture or sound - Some of the functions do not work be remote operation from the TV If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use. Do not disconnect the power plug when the TV is active and the MHL device is being connected. Do not disconnect the power plug when the TV is in standby mode and the MHL device is being connected. Please take note EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) ii) iii) iv) v) vi) vii) any damage or loss caused as a result of the owner s failure and/or neglect to follow the instructions any loss or damage caused directly as a result of misuse or malfunction of the product when used viii) Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage whether caused during normal operation or misuse of the product. The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP menu. Depending on country/area, some of this television s functions may not be displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings. Very long, continuous use of the 4: picture on a 6:9 screen may result in some retention of the image at the 4: outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention. NOTE: Interactive video games that involve shooting a gun type of joystick at an on-screen target may not work with this TV. SYMBOL SYMBOL DEFINITION INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. WARNING: this product at all times. 6
Simple at-a-glance reference of your remote control. The Remote Control In TV mode: Display on-screen information In Text mode: Access the index page Mute the sound 4 Display the QUICK access menu 5 Exit the menu system 6 Display EPG 7 Go to the previous level of the menu 8 Display the on-screen menu 9 In Text mode: Change the page Colour button: Text control buttons Reveal concealed text Hold a wanted page Enlarge text display size Select a page while viewing a normal picture Switch between TV ON or Standby Switch between external input sources Still Picture 4 To display the teletext screen 5 TEXT subtitle pages if available 6 Stereo/Bilingual transmissions 7 Number buttons 8 Audio Description 9 Switch between ATV and DTV Change the volume Change the channel Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA,.5V. Do not combine a used, old battery with a new one or mix battery types. Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 7 of this manual. Warning: batteries must not be exposed to excessive heat such as The performance of the remote control will or outside an angle of degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing. 7
Connecting External Equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. ILLUSTRATION SHOWS L44. *a decoder could be Digital Satellite or any other compatible decoder. *Model will determine power cord position. USB SOCKET HDMI INPUT SOCKET POWER CORD RGB/ PC HDMI INPUT SOCKET SCART (INPUT/TV OUT) 8
Aerial cables: - - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. Satellite cable: - - - - - - - - - - - - - - - - - - - Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception. SCART cables: - - - -- - - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby. HDMI video signals but will also accept and display 48i, 48p, 576i, 576p, 7p and 8p. HDMI also support VGA, SVGA, XGA, WXGA and SXGA. NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly. A wide variety of external equipment can be connected to the back of the television, therefore the relevant owner s manuals for all additional equipment must be referred to. If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired channel button. To recall external equipment, press to select. NOTE: Due to copy protected signal in some DTV programme, non-scrambled content and scrambled content with copy freely (CGMS-A: ) are available via SCART analog video and audio output. DTV Programme Scrambled with CGMS-A: (Copy Freely) Scrambled with CGMS-A: (Copy No More) Scrambled with CGMS-A: (Copy Once) Scrambled with CGMS-A: (Copy Never) SCART Analog Output Output via SCART Not output via SCART Not output via SCART Not output via SCART Non- scrambled Output via SCART *CGMS-A (Copy Generation Management System-Analog) is a copy protection mechanism for analog television signals. 9
HDMI CEC Connections The basic functions of connected audio/video equipment can be controlled using the television s remote control if an HDMI CEC compatible device is connected. ILLUSTRATION SHOWS L44. The back of your television AV amplifier HDMI in HDMI out Playback equipment Playback equipment HDMI out HDMI out
Connecting an HDMI or DVI Device to the HDMI Input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-86-D compliant [] consumer electronic devices (such as a settop box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 4. NOTE: Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. Supported Audio format: Linear PCM and Dolby Digital, sampling rate /44./48kHz. To connect an HDMI device Connect an HDMI cable (type A connector) from the device to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). If your HDMI connection is capable of 8p and/or your television is capable of refresh rates greater than 5Hz, you will need a Category cable. Conventional HDMI/DVI cable may not work properly with this mode. HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration). ILLUSTRATION SHOWS L44. HDMI device HDMI out HDMI cable (not supplied) To view the HDMI device video, press the button to select HDMI or HDMI mode.
To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI. The maximum recommended HDMI DVI cable length is m. An HDMI-to-DVI adapter cable transfers video only. Separate analogue audio connection is not supported for audio receivers. ILLUSTRATION SHOWS L44. HDMI-to-DVI adapter cable (not supplied) DVI device To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: device. television. [] EIA/CEA-86-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer s display on the television. HDMI Op. When connecting a PC to the HDMI terminal on the TV, use an HDMI cable. Op. When connecting a PC with DVI terminal, use an HDMI - to - DVI cable. PC Input Op. When connecting a PC to the RGB/PC terminal on the TV, use a RGB (5 pin) cable. For acceptable PC and video signal formats, see page 4. NOTE: The edges of the images may be hidden. If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
Acceptable Video signals through HDMI terminals Resolution 48i 5.75 6. 48p.5 6. 576i 5.65 5. 576p.5 5. 7p 7.5 5. 7p 45. 6. 8i 8.5 5. 8i.75 6. 8p 7. 4. 8p 8.5 5. 8p.75. 8p 56.5 5. 8p 67.5 6. Acceptable PC signals through HDMI terminals Resolution Pixel Clock H-Polarity V-Polarity H-Total V-Total 64 x 48.469 59.94 5.75 Negative Negative 8 55 64 x 48 7.86 7.89.5 Negative Negative 8 5 64 x 48 7.5 75..5 Negative Negative 84 5 8 x 6 5.6 56.5 6. Positive Positive 4 65 8 x 6 7.879 6.7 4. Positive Positive 56 68 8 x 6 48.77 7.88 5. Positive Positive 4 666 8 x 6 46.875 75. 49.5 Positive Positive 56 65 4 x 768 48.6 6.4 65. Negative Negative 44 86 4 x 768 6. 75.9 78.75 Positive Positive 8 8 x 768 47.776 59.87 79.5 Negative Positive 664 798 6 x 768 47.7 6.5 85.5 Positive Positive 79 795 8 x 4 6.98 6. 8. Positive Positive 688 66 8 x 4 79.976 75.5 5. Positive Positive 688 66 9 x 8 67.5 6. 48.5 Positive Positive 5 4
Using the Controls While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used control some functions. ILLUSTRATION SHOWS L44. Common Interface USB HDMI INPUT SOCKET Power Up / down (Volume or channel) Programme / Volume / Source Headphone Remote sensor RED LED - Standby GREEN LED - Power on Switching On If the RED Standby LED is unlit, check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. For energy saving: We recommend that you use the television with factory settings. These settings are designed for energy saving. Unplugging the mains plug will reduce energy use to zero. This is recommended when the television is not being used for long periods, e.g. when on holiday. Reducing the brightness of the screen will energy consumption and can save money by reducing electricity bills. NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power. Using the Remote Control To set up the television you will now need to use the on screen menus. Press MENU on the remote control to see the menus. topics. As each symbol is selected by pressing control. To use the options, press to enter the sub ring to move up and down through the menu and use to select the required choice. Follow the on-screen instructions. The functions of each menu are described in detail throughout this manual. Using the Controls on the TV Press to adjust volume. Press to change programme selection, then press to adjust programme selection. Press and hold until Source List is displayed, then press to scroll through the list until desired input source is located. NOTE: Inserting the headphone plug will mute the sound from all speakers. 5
Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 7. First Time Using and press the button. The Language menu will appear. 6 Press to select Tuner Mode. Tuner Mode Satellite Language Español Nederlands Norsk Slovenščina Česky бългapcки Hrvatski Français Italiano Svenska Suomi Magyar Pyccкий Srpski Türkçe Select Enter Deutsch Português Dansk Polski Slovensky Română Eλληvıκά Українське NOTE: This function is accessed in the SETUP Quick Setup menu. language. Press to enter Quick Setup menu. Country and 4 Country Digital Subtitle Language Digital Subtitle Language nd Audio Language Audio Language nd Quick Setup Germany German Turkish German Turkish Select Tuner Mode RETURN Back Digital Subtitle Language, Digital Subtitle Language nd, Audio Language and Audio Language nd select your preferred language. 5 Press to select Time Zone. Time Zone This function allows you to manually set the time zone. Mainland Select Tuner Mode RETURN Back Mainland or Canary Islands. NOTE: This function is only available when Country is Spain. Select Location RETURN Back Satellite, Antenna, Cable, Antenna + Satellite or Cable + Satellite. If Satellite is selected, the following displays except in Austria, Germany and Switzerland. Tuner Mode Pay TV channels may not be supported for the selected country. As a result, some programmes could be unavailable. Do you wish to proceed with Satellite tuning? NO Select Location RETURN Back If Antenna is selected in Tuner Mode, the following displays. Tuner Mode DTV may not be fully supported for the selected country. As a result, some programmes could be unavailable. Do you wish to proceed with Terrestrial tuning? NO Select Location RETURN Back If Cable is selected in Tuner Mode, the following displays except in Germany. Tuner Mode Digital cable may not be fully supported for the selected country. As a result, some programmes could be unavailable. Do you wish to proceed with Cable tuning? NO Select Location RETURN Back NOTE: Cable option is not supported in Greece, Italy, Luxembourg, Portugal, Spain and the UK. Select Yes No to re-select Tuner Mode. 6
7 Press to select Location. Home or Store. For normal home use, select Home. 9 In Antenna+Satellite mode, the ATV channel list appears after auto tuning. Press to enter Satellite Settings menu. Location Auto tuning To use the TV for the display in a store showroom, please select [Store]. [Home] mode is recommended for normal use. Home ATV Position DTV Services Found: Name VCH S-5 ATV Services Found: CH C6 S5 Select Auto tuning RETURN Back When Store window appears. Location You have selected [Store]. This mode consumes more energy. Are you sure you want to set to this mode? NO Select Auto tuning RETURN Back YES or NO. In Antenna/Cable In Satellite mode, press to enter Satellite Settings In Antenna/Cable+Satellite mode, go 8 Press to enter the Auto tuning menu. NOTE: Please make sure the aerial is connected to the TV before tuning. Tuning Mode Start Scan Edit Auto tuning ATV and DTV RETURN Back Tuning Mode ATV, DTV or ATV and DTV. Start Scan and press. ATV DTV Progress Auto tuning 6 % % Channel: S54 Station: EXIT to exit ATV scan Found Next Press to enter Satellite Settings menu. Switch Type None, ToneBurst, DiSEqC way, DiSEqC 4way or Single Cable. Switch Type LNB Power No. 4 Edit Satellite Settings Satellite ASTRA 9. E Done None On RETURN Back LNB NOTE: None is being used when the satellite dish will control only one universal Low Noise Block (LNB) with a single satellite (e.g. Astra 9. ). As a rule, most households use just one satellite. ToneBurst sends a khz signal. ToneBurst is only necessary for simple LNBs (not universal LNBs). The khz signal is needed for switching LNBs with multifeed signals as well as for changing between lowand high-band. DiSEqC way automatically switches between two LNBs, which receive different satellites at the same time (e.g. Astra 9. and Hotbird ). DiSEqC 4way automatically switches between up to four LNBs / satellites. Single Cable is selection and control of plural Satellite antennas through the combined single antenna cable. 7
LNB Power and On or Off. press to change further settings. Switch Type LNB Power Satellite Settings None On 4 If you select Single Cable in step 9, the Single Cable Settings menu User Slot Number, User Slot Frequency, Password PIN, Reset or Verify Slot Frequency the setting. No. Satellite LNB Single Cable Settings ASTRA 9. E 4 Transponder: / (74 MHz) Lower LOF: 975 Upper LOF: 6 User Slot Number User Slot Frequency Password PIN Reset Verify Slot Frequency Done 84 None Done Edit RETURN Back Edit RETURN Back It is possible to select up to four satellites. Please note that the number of available LNBs and the adjustment of your satellite dish determines the number of satellites found. For further information on satellite signal technology, please contact your local dealer. 5 Done and press to enter Positioning menu. Adjust the dish position manually for the maximum Signal Level strength. The signal level strength is displayed from % to %. A high signal level can be achieved by adjusting the satellite dish the best way possible. Satellite or LNB and press. Satellite:. ASTRA 9. E Positioning PLease adjust the dish position manually, and then select [Done]. Satellite Settings Switch Type LNB Power None On Signal Level % No. Satellite LNB Done ASTRA 9. E 4 Transponder: / (74 MHz) Lower LOF: 975 Upper LOF: 6 Done Transponder Enter Press to enter menu. Change Save Transponder Settings Done and press. 8
6 Search Option Free to Air or All. Auto Tuning ( Satellite ) Scan Type Search Option Start Scan Quick Scan Free to Air Edit RETURN Back 7 When choosing the search option All, all channels (including encrypted ones) of the satellite will be searched for. If you wish to only search for unencrypted (free) channels, please select Free to Air. In this case, the channel scan will be completed faster. Start Scan and press. Auto Tuning ( Satellite ) Progress Found % ASTRA 9. E : 79 MHz / V(R) / EXIT Stop The search will begin for all available stations. The slide bar will move along the line as the search progresses. You must allow the television to complete the search. When the search is complete the television will automatically select channel. This may not be a clear picture or the signal may be weak, so the station order can be changed using ATV/ DTV Manual Tuning in the SETUP menu. 9
Setting the Channels NOTE: When Parental is activated, the 4-digit password is needed. Auto Tuning The Auto tuning function will completely retune the television and can be used to update the channel list. NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added. NOTE: All the current channels and settings, for example, the locked channels, will be lost. Tuner Mode - Antenna Press MENU SETUP and press to enter the PICTURE SOUND APPLICATIONS PREFERENCES SETUP Auto tuning, and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Antenna Enter RETURN Back Start Scan and press to start Auto Tuning. ATV DTV Progress Auto tuning 6 % % Channel: S54 Station: EXIT to exit ATV scan Found Tuner Mode - Cable Switching between tuner modes will change the features available on your television. All the current channels and settings, for example, the locked channels, will be lost. In the SETUP Tuner Mode and press. YES or NO. Tuner Mode This may change the features available on your TV. Continue? NO Select Enter RETURN Back Press MENU SETUP and press to enter the Auto tuning, and press to enter the Tuning Mode ATV, DTV or ATV and DTV. Auto tuning Previous settings will be lost! Press EXIT for no change. Tuning Mode Start Scan ATV and DTV Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Cable Edit RETURN Back Enter RETURN Back
Tuning Mode ATV, DTV or ATV and DTV. Auto tuning Previous settings will be lost! Press EXIT for no change. Tuning Mode Start Scan Operator Selection Scan Type Start Frequency (MHz) End Frequency Modulation Symbol Rate Network ID System Edit ATV and DTV Quick Scan Auto Auto Auto Auto Auto D/K RETURN Back 4 Operator Selection Others, Ziggo or UPC. NOTE: Operator Selection can only be adjusted when Country is Netherlands. 5 Scan Type, and Full Scan or Quick Scan. NOTE: Channels with a weak signal may be missed by Quick Scan. 6 Operator Selection, Scan Type, Start Frequency, End Frequency, Modulation, Symbol Rate, Network ID or System, and use number key pad on the remote to Auto for tuning. Start Scan and press to start tuning. NOTE: The information should be given by your cable provider. Network ID is only available for Quick Scan. Tuner Mode - Satellite Press MENU SETUP and press to enter the Auto tuning, and press to enter the 4 5 Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Satellite Enter RETURN Back Scan Type, and Full Scan, Quick Scan or Fast Scan. NOTE: Quick Scan is enabled only when Fast Scan is enabled only when choosing ASTRA 9.E. Search Option Free to Air or All. Scan Type Search Option Start Scan Edit Auto Tuning ( Satellite ) Quick Scan Free to Air RETURN Back Start Scan and press to start tuning.
Manual Tuning There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. ATV mode - Antenna/Cable Press MENU SETUP and press to enter the ATV Manual Tuning and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Antenna Enter RETURN Back position you want to arrange and then Position 4 5 6 Channel C69 C69 C69 C69 C69 C69 ATV Manual Tuning Station Sort Enter RETURN Back 4 your preferred position. As you do so the other stations will move to make room. Position 4 5 6 Channel C69 C69 C69 C69 C69 C69 ATV Manual Tuning Station 5 A B C D E F G H I Press to display the breakdown shown below. ATV Manual Tuning Position DK A C 69 Select Change Save RETURN Back A B C D E F G H I Position: The number to be pressed on the remote control. System: Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source. Skip: means nothing has been stored or the facility to skip the channel is On. Signal Class: Channel: The channel number on which a station is being broadcast. Searching: Search up and down for a signal. function. Station: characters. 6 Press to save. Store RETURN Back
DTV mode - Antenna Press MENU SETUP and press to enter the DTV Manual Tuning and press to enter the Frequency, Modulation or Symbol Rate, and use the information or select Auto for tuning. Signal Strength Quality DTV Manual Tuning Weak Average Poor Strong 4 Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Antenna Enter RETURN Back RF Channel and pad on the remote to enter a channel. Signal Strength Quality Tuner Mode RF Channel Frequency Start Scan 9 Input DTV Manual Tuning Weak Average Poor Edit DVB T 5 77.5 MHz RETURN Back Strong Start Scan and press to start tuning. Frequency Modulation Symbol Rate Start Scan 9 Input Edit. MHz Qam 6 69 KS/s RETURN Back Start Scan and press to start tuning. DTV mode - Satellite Press MENU SETUP and press to enter the DTV Manual Tuning and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Satellite DTV mode - Cable Press MENU SETUP and press to enter the DTV Manual Tuning and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Cable Enter RETURN Back Enter RETURN Back Satellite, Transponder, Frequency, Symbol Rate, Polarisation, Search Option or Start Scan the setting. Signal Strength Quality Satellite Transponder Frequency Symbol Rate Polarisation Search Option Start Scan Edit DTV Manual Tuning ( Satellite ) Weak Average Poor LNB Settings ASTRA 9. E / 74 MHz KS/s H (L) Free to Air RETURN Back Strong Start Scan and press to start tuning.
Satellite Settings From the Satellite Settings menu, you can add the satellites that you wish to tune and Edit satellite settings Press MENU SETUP and press to enter the Satellite Settings and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Satellite Add a satellite In the Satellite Settings menu, press another satellite and press. Switch Type LNB Power No. 4 Transponder: N/A Lower LOF: N/A Upper LOF: N/A Satellite Settings Satellite ASTRA 9. E Done ToneBurst On Edit Delete RETURN Back LNB Satellite or LNB Switch Type LNB Power Satellite Settings ToneBurst On Enter RETURN Back Switch Type None, ToneBurst, DiSEqC way, DiSEqC 4way or Single Cable. Switch Type LNB Power No. 4 Satellite Settings Satellite ASTRA 9. E None On LNB No. 4 Transponder: N/A Lower LOF: N/A Upper LOF: N/A Change Satellite ASTRA 9. E Save Done Press to save the settings. Switch Type LNB Power Satellite Settings LNB Transponder Settings ToneBurst On No. Satellite LNB 4 Edit Done RETURN Back Press to select LNB Power and press to select On or Off. 4 Transponder: /45 (68 MHz) Lower LOF: 975 Upper LOF: 6 ASTRA 9. E ASTRA.5 E Done Edit Delete RETURN Back 4 Delete a satellite In the Satellite Settings delete. Press the button on the remote to delete the selected satellite. YES select NO to exit and press. NOTE: It is not possible to delete position No..
Add a transponder In the Satellite Settings. Switch Type LNB Power No. Satellite Settings ASTRA 9. E 4 Transponder: / (74 MHz) Lower LOF: 975 Upper LOF: 6 Change Save Satellite Done None On LNB Transponder Settings Press the button on the remote to enter Transponder Settings menu. Transponder Settings Delete a transponder In the Transponder Settings menu, you want to delete. Press the button on the remote to delete the selected transponder. YES select NO to exit and press. NOTE: It is not possible to delete position No.. Edit the transponser settings In the Transponder Settings menu, you want to edit and press. Frequency, Polarisation, Symbol Rate or S/S and 4 5 6 7 8 9 Frequency 74 79 744 759 77 788 8 88 8 Polarisation H (L) V (R) H (L) V (R) H (L) V (R) H (L) V (R) H (L) Symbol Rate Cancel Reset Done Edit S/S. 8 9 4 4 4 4 44 45 46 Frequency 69 645 66 66 674 685 75 75 Transponder Settings Polarisation V (R) H (L) V (R) V (R) V (R) H (L) H (L) V (R) Symbol Rate 94 477 555 6 75 S S S S S S S S S S/S S S S S S S S S 4 5 6 7 8 9 Frequency 68 79 79 759 778 798 87 87 856 Transponder Settings Polarisation V (R) H (L) V (R) H (L) V (R) H (L) V (R) H (L) V (R) Symbol Rate 74 75 75 75 75 75 75 75 S/S S S S S S S S S S -9 Input Enter RETURN Back Press to save settings. 4 Press the button on the remote to cancel any edits that were made. Press the button on the remote to reset all transponder settings to their default settings. Press the button on the remote to Satellite Settings menu. Cancel Reset Done Edit Transponder Settings 4 Edit each parameter as required and press. 4 5 6 7 8 9 Frequency 68 79 79 759 778 798 87 87 856 Polarisation V (R) H (L) V (R) H (L) V (R) H (L) V (R) H (L) V (R) Symbol Rate 74 75 75 75 75 75 75 75 S/S S S S S S S S S S Delete Cancel Reset Done Edit 5
Select LNB settings In the Satellite Settings edit and press. LNB. Switch Type LNB Power No. Satellite Settings Satellite ASTRA 9. E 4 Transponder: / (74 MHz) Lower LOF: 975 Upper LOF: 6 Done None On LNB Automatic Power Down The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after approximately 5 minutes. In the SETUP select Automatic Power Down. Press to select Off, 4h, 6h or 8h. Automatic Power Down Location Library Software Upgrade System Information Reset TV SETUP / 4h Home Change Save LNB Settings Press the button on the remote to enter LNB Settings menu. LNB Settings Edit RETURN Back 4 LNB : Lower LOF Upper LOF 975 6-9 Input Enter RETURN Back Lower LOF or Upper LOF, and use number key pad on Reset TV Selecting Reset TV will reset all TV settings to their original factory values. In the SETUP select Reset TV and press. YES select NO to exit and press. Reset TV Previous settings will be lost! Press EXIT for no change. NO Select Enter RETURN Back 6
Channels The channel order may be changed to suit your personal preference. NOTE: This function is only available in DTV mode. Press MENU SETUP and press to enter the DTV Settings Favorite 7 Press the button on the remote. A icon appears. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three TV Re number Favorite Skip Lock Sort PICTURE SOUND APPLICATIONS PREFERENCES SETUP DTV Settings and press to enter the Channels and press. Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface DTV Settings :7 Enable Off On Enter RETURN Back 4 Channels. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three TV Skip 8 Press to show the Channel List and Favorite. The desired channel is displayed on the list. Channel List DTV DTV Favorite 84 Rossia 4 86 TRK 5 kamal Press the button on the remote. A icon appears. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three Re number Favorite Skip Lock Sort TV Re number Favorite Skip Lock Sort Re-number 5 Press the button on the remote to renumber the highlighted channel. 6 Edit the channel number using the number keys on the remote and press. Position 8 4 ABC Jazz ABC ABC ABC ABC ABC4 Channels Name TV Lock 9 Press the button on the remote. A icon appears. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three Re number Favorite Skip Lock Sort TV 9 Input Enter RETURN Back 7
Sort channel and then press. A tick icon appears. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three Store RETURN Back wish to swap with the one selected in the previous step and then press. Position 8 84 85 86 87 7 Channels Name Rossia Rossia 4 NTV TRK 5 kamal Bibigon Service Information Radio Three Store RETURN Back The name of the two channels are swapped. TV TV Password Change the 4-digit parental control password. The factory default password is 76. In the DTV Settings Password, and press to enter the Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface DTV Settings :7 Enable Off On Enter RETURN Back Enter a new 4-digit password, and re- New Password Confirm Password Password Position 84 85 86 87 7 74 Channels Name Rossia NTV TRK 5 kamal Bibigon Service Information Radio Three CNN CO/B EIT text TV 9 Input RETURN Back NOTE: cannot be used. Re number Favorite Skip Lock Sort Subtitle and Audio You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired. If the Hearing Impaired is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions. Subtitle Language or Audio Language allow of soundtrack language, provided they are currently being broadcast. In the DTV Settings Subtitle And Audio, and press to enter the Subtitle Display On or Off. Subtitle Type or Audio Type Normal or Hearing Impaired. 4 Digital Subtitle Language, Digital Subtitle Language nd, Audio Language or Audio Language nd select your preferred language. Parental This function blocks channels or programmes that you do not want to or that you do not want your children to watch. A password is required to access this function. The factory default password is 76. NOTE: When Parental Control is activated, you will need to enter the 4-digit password before you enter the DTV Settings submenu under the SETUP menu. After auto tuning, all the channel blocks will be cleared. In the DTV Settings Parental, and press to enter the Enter the 4-digit password. age ~8 or select None to turn this function off. NOTE: This function is available for programmes with Age Rating information. 8
Standby Update Control In the DTV Settings Standby Update Control. Enable or Disable. Standby Channel Update If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved. In the DTV Settings Standby Channel Update. On or Off. NOTE: Standby Channel Update is only available when Standby Update Control is Enable. Channel Grouping There are Video, Radio and Text services combined in a channel list for DTV services, The function provides the selection of channel change with one service group or among all services by pressing P and P. In the DTV Settings Channel Grouping. On or Off. Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box the CAM has been inserted. In the DTV Settings Common Interface, and press to enter the Details of the CAM should now be available. NOTE: The software updating of CI Plus CAM may be automatically executed. At this time, any Recording/Reminder programme timer will be cancelled. Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface DTV Settings :7 Enable Off On Edit RETURN Back When Channel Grouping is On, the channel change by P and P will be within a single service group, press ATV/DTV on the remote control can be still used for change services among ATV, DTV Video, DTV Radio and DTV Text. 9
Data Transfer This function is used to export the channel list and transponder table from the TV to a USB so they can be edited on a PC. NOTE: The function is only available when Tuner Mode is Satellite, Antenna + Satellite or Cable + Satellite. Use an empty USB storage device for data will be erased. To edit the channel list/transponder table, download the tool from the Toshiba website. root of the USB storage device. Do not change the name of the transferred back to the TV. Exporting from TV to USB In the DTV Settings Data Transfer, and press to enter the Channels Subtitle and Audio Password Parental Local Time Setting Standby Update Control Standby Channel Update Channel Grouping Data Transter Common Interface DTV Settings :7 Enable Off On Enter RETURN Back Channel List or Transponder Table and press. Channel Iist Transponder Table Data Transfer 4 TV to USB. Please Insert USB Memory Channel Iist TV to USB Caution: Files on the USB stick will be erased! Edit RETURN Back NOTE: Files on the USB storage device will be erased when exporting the channel list. 5 Press to export. Channel Iist Please Wait Edit RETURN Back Press RETURN to exit. Channel List Edit RETURN Back Importing from USB to TV - Channel List Repeat step ~ as Exporting from TV to USB. USB to TV. Channel Iist Please Insert USB Memory USB to TV Edit RETURN Back Enter RETURN Back NOTE: Channel List and Transponder Table are both for Satellite. Transponder Table is always transferred with the default scanned information. Insert a USB storage device to the TV. Press to import. Channel Iist Please Wait Edit RETURN Back Remove the USB storage device from the TV and then the TV will be reset automatically. Channel Iist Please remove USB memory, then TV will be reset automatically. Edit RETURN Back
Importing from USB to TV - Transponder Table Repeat step ~ as Exporting from TV to USB. USB to TV. Transponder Table Please Insert USB Memory USB to TV Press to import. Edit RETURN Back Transponder Table Please Wait Edit RETURN Back After importing the transponder table, please see page 4 to follow the instructions and re-select the satellite for tuning. Transponder Table Edit RETURN Back
Digital On-Screen Information and Programme Guide When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information Press, and the information screen will appear giving details of the channel and programme currently being viewed. BBC Parliament Now Next Westminster Hall Prime Minister's Questions :8 Sun, 7// SD 6 : 9 AD 7 Minutes Left Recorded coverage of questions in the House of Commons to Prime Minister Gordon Brown from Wednesday 6 November. Change RETURN Exit 7: : : : Event info Icon Description HD, SD Video format (HD, SD) 6:9, 4: Video Aspect Teletext Subtitle (Single, Multi) Multi-audio track, 4-8 Parental rating Encrypted Now or Next information guide. Timer info Recording Reminder On-Screen Information Icons Icons will appear on the Information screen giving details about the programmes being broadcast. Details of these icons are listed below: Service info Audio info Audio/ Subtitle info Icon Dolby D Dolby D+ HE-AAC AD Description Service type (TV, Radio, TEXT) Skip Mono Stereo Dual mono Multichannel Dolby Digital Dolby Digital+ Audio Coding Audio Description Hearing Impaired Recording info Guide New Locked Recording Select the on-screen guide by pressing GUIDE. The guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. programmes scheduled for the channel selected. For details of other programmes currently down the channel list. NOTE: In order for the recording operation to work properly, the media recorder must be set to the same time as the TV. Regarding the process for recording, please refer to the owner s manual of the recording equipment.
General Controls The General Functions allow you to select channels and information, adjust sound features, personalise the picture style and select any connected external equipment. Selecting Channels To select a channel use the numbered buttons on the remote control. Channels can also be selected using P and P. Stereo and Bilingual Transmissions If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time channels are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. Stereo: Press to select Stereo or Mono. Bilingual: If a bilingual programme is offered, the word Dual will display on screen. To change between languages, press to switch between Dual and Dual. Quick Access Menu Quick access helps you access some options quickly such as PVR Control, Picture Size, Picture Mode, Sleep Timer, Media Player, System Information, HDMI CEC Control, Speakers and MHL Control. Press the QUICK button to display the Quick access menu and to change. PVR Control Picture Size Picture Mode Sleep Timer Media Player System information HDMI CEC Control Speakers MHL Control Quick access Wide Standard : TV Speakers Subtitles If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off. Picture Still This feature is used to hold a still image on the screen. Press to hold an image on the screen, press again to cancel. Input Selection Use the Input Selection feature if the television does not switch over automatically when using an external device. Pressing, a list will appear on-screen showing all external equipment. to select. Inputs TV C HDMI HDMI MEDIA PC HDMI displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with NOTE: Quick access items are different depending on the current mode.
Sound Controls Volume Controls and Mute Sound Volume Press or to adjust the volume. Sound Mute Press on the remote once to turn the sound off and again to cancel. Dual a soundtrack in more than one language, the DUAL feature allows selection between them. Press MENU SOUND and press to enter the PICTURE SOUND SETUP APPLICATIONS PREFERENCES Dual, and press Dual or Dual. Dual Bass Treble Balance Stable Sound Dynamic Range Control Advanced Sound Settings Audio Level Offset Digital Audio Output Audio Description Edit SOUND Dual Off On RETURN Back Bass, Treble and Balance The sound controls are accessible in digital and analogue modes. Press MENU SOUND and press to enter the Bass, Treble or Balance the setting. Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. Press MENU SOUND and press to enter the Stable Sound, On or Off. Dynamic Range Control This feature allows control of audio compression for some digital TV programmes (MPEG- and MPEG- audio programmes are not supported). Press MENU SOUND and press to enter the Dynamic Range Control On or Off. Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker s voice, making it easier to catch what they are saying. Press MENU SOUND and press to enter the Advanced Sound Settings and press to enter the Voice Enhancement select On or Off. Voice Enhancement Bass Boost Edit Advanced Sound Settings Off Low RETURN Back 4
Bass Boost Bass Boost enhances depth of the sound. Press MENU SOUND and press to enter the Advanced Sound Settings and press to enter the Bass Boost, and Digital Audio Output Press MENU SOUND and press to enter the Digital Audio Output and press to enter the Audio Format, PCM or Auto. Audio Level Offset Sometimes there can be large changes in volume when switching from a DTV 5.ch to a DTV ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. Press MENU SOUND and press to enter the Audio Level Offset and press to enter the DTV ch ATV External Input Edit Audio Level Offset RETURN Back NOTE: The available item changes depending on the current input source. For example, while watching a DTV ch programme, only DTV ch is available and the other two items are grayed out in the menu. This allows you to easily adjust according to each condition. When watching a DTV 5.ch programme, this feature is not available. 4 5 Audio Format Audio Delay Audio Delay Time (ms) Edit Digital Audio Output Auto Manual RETURN Back Audio Delay, Auto or Manual. Audio Delay the setting. NOTE: is only available when Audio Delay is Manual. Audio Description Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations. Press MENU SOUND and press to enter the Audio Description and press to enter the Audio Description On or Off. Audio Description Mixing Level Audio Description On 8 5 Edit RETURN Back 4 Mixing Level, NOTE: Mixing Level can only be adjusted when Audio Description is On. NOTE: Press the AD button on the remote control to switch the Audio Description On or Off.
Wide (Except PC) Widescreen Viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Use this setting when watching a widescreen DVD, widescreen video tape or a 6:9 broadcast (when available). Due to the range of widescreen formats (6:9, 4:9, :9 etc.) black bars may be visible on the top and bottom of the screen. Wide (PC only) This setting will show the picture without over scan and side panel when watching a PC signal source via HDMI or PC terminal. 4: Use this setting to view a true 4: broadcast. Super Live Cinema This setting will enlarge a 4: image to horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. video tapes, this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion. Subtitle When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. Subtitle 4:9 Use this setting when watching a 4:9 broadcast. Native The setting will show the picture without over scan, i.e. WYSIWYG. This option is available when watching video signal source via HDMI or watching DTV (HD signal). 6
Normal This setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Dot by Dot is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and bottom (i.e. VGA input source). Press QUICK to display the Quick access Picture Size, PVR Control Picture Size Picture Mode Sleep Timer Media Player System information HDMI CEC Control Speakers MHL Control Quick access Wide Standard : TV Speakers You can choose the picture size from Wide, 4:, Super Live, Cinema, Subtitle, 4:9, Native, Normal or Dot by Dot. Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. Available Picture Size and Position Control Wide 4: Super Live Cinema Subtitle 4:9 Native Normal Dot by Dot ATV o o o o o o x x x DTV SD o o o o o o x x x HD o o o o x o o x x Scart o o o o o o x x x CVBS o o o o o o x x x YPbPr HDMI SD o o o o o o x x x HD o o o o x x x x x SD o o o o o o o x x HD o o o o x x o x x D-SUB o x x x x x x o o DVI o x x x x x x o o 7
Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. NOTE: Features not available will be greyed out. Picture Position The Picture Position may now be adjusted to suit personal preference. Press MENU SETUP and press to enter the Picture Mode You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category. Press MENU PICTURE and press to enter the PICTURE SOUND APPLICATIONS PREFERENCES SETUP Picture Position and press to enter the Language Country Tuner Mode Satellite Settings Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SETUP / Germany Antenna Enter RETURN Back adjust the settings as required. Horizontal position Vertical position Reset Picture Position PICTURE SOUND SETUP APPLICATIONS PREFERENCES Picture Settings and press to enter the Picture Mode Dynamic, Standard, Mild, Movie, Game or User. NOTE: Game is not available for the TV input mode. Picture Mode Active Backlight Control Back Light Contrast Brightness Colour Tint Sharpness Black/White Level Cinema Mode Colour Temperature Static Gamma Reset Picture Settings Standard High 7 95 5 5 5 Middle On Medium Edit RETURN Back Edit RETURN Back Picture Preferences You can customise current picture mode settings while selecting User. In the Picture Settings Back Light, Contrast, Brightness, Colour, Tint, Sharpness. 8
Black/White Level This function increases the strength of dark areas of the picture, which improves picture In the Picture Settings Black/White Level. Off, Low, Middle or High. The effect depends on the broadcast and is most noticeable on dark colours. Cinema Mode second, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at (NTSC) or 5 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the Cinema Mode. In the Picture Settings Cinema Mode. On or Off. Colour Temperature Colour Temperature increases the warmth or coolness of a picture by increasing the red or blue tint. In the Picture Settings Colour Temperature and Colour Temperature Medium, Warm or Cool to suit your preference. Static Gamma The static gamma feature allows you to adjust the levels of black in the picture. In the Picture Settings Static Gamma. Static Gamma (-5~+5). Reset This feature resets all picture settings to the factory settings. In the Picture Settings select Reset and press to reset settings. NOTE: If any picture settings have not been changed, Reset is not available. Active Backlight Control When the Active Backlight Control feature is activated, High mode will control the backlighting levels depending on various scenes such as picture motion, bright scene or dark scene. Low mode will control the backlighting level on dark scene. In the Picture Settings Active Backlight Control. Off, Low or High. Colour Temperature Colour Temperature Red Level Green Level Blue Level Medium Red Level, Blue Level or Green Level to adjust the settings as required. 9
D Colour Management When D Colour Management is set to On, it allows the Base Colour Adjustment feature to become available. You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan. In the PICTURE select D Colour Management. On or Off. Digital Noise Reduction enables you to soften the screen representation of a weak signal to reduce the noise effect. In the PICTURE select DNR. Off, Low, Middle or High. NOTE: This function is not available for HDMI input. NOTE: When a DVD movie with subtitle is playing back, this mode may not work correctly. Base Colour Adjustment The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when D Colour Management is set to On. In the PICTURE to select Base Colour Adjustment and press to enter the to adjust and press. MPEG NR Noise Reduction When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. In the PICTURE select MPEG NR. Off, Low, Middle or High. Base Colour Adjustment Hue Saturation Brightness Red Green Blue Yellow Magenta Cyan Reset Edit RETURN Back Hue, Saturation or Brightness. Base Colour Adjustment Hue Saturation Brightness Red 4 required. NOTE: In the PC Input mode, this function is not available. 4
Enjoy Photos through USB Port Image Photo Resolution JPEG PNG BMP Base-line Progressive non-interface interface 56x874 (9x8 x 88x8) 4x768 96x64 x8 96x64 View Photo Files Insert a USB storage device and press on the remote. MEDIA and press. you wish to view and press to enter. Press P or P to page up or down. USB:\ Home / Inputs TV C HDMI HDMI MEDIA PC Photo and press to enter the Home Music Photo Video P Page Move Select RETURN 4 desired photo and press to view. Back USB. Photo Music Movie Move Select EXIT Exit 4
5 Press MENU to change the settings when viewing a photo. Set Interval Time Press MENU to change the settings when viewing a photo. and press to select the desired interval time (/5//5//6/9 Sec). Off On 5 sec 788 X 57 / 4 -.jpg ---- /-- /-- -- : -- Previous Move Select RETURN Back : Go to the previous photo : Go to the next photo : Select slide show mode : Select repeat mode : Select the desired interval time : Clockwise rotation 9 : Counterclockwise rotation 9 : Show play list : Set the background music : Photo information and press Using the Play List Press MENU to change the settings when viewing a photo. and press. press to show the photo. Press RETURN on the remote to collapse the list. Off On 5 sec 788 X 57 / 4 -.jpg ---- /-- /-- -- : -- P Page -.jpg -.jpg -.jpg -4.jpg / Play List Move Select RETURN Back Using Slide Show This view allows you to watch a slide show of the photos. In this view mode, the only content that locates on the same directory shall be played. Press MENU to change the settings when viewing a photo. and press to turn On or Off. NOTE: If Repeat is On, slide show starts photo Repeat Settings for Slideshow Press MENU to change the settings when viewing a photo. and press to turn On or Off. Background Music Set the background music when viewing photo. Press MENU to change the settings when viewing a photo. and press. Off On 5 sec 788 X 57 / 4 -.jpg ---- /-- /-- -- : -- P Page Background Music Move Select RETURN Back 4
and press. Photo Info Info number, photo title, shooting date and time, resolution etc.). Press MENU to change the settings when viewing a photo. and press. Background Music 6 Play List Move Select RETURN Back to play music. Press RETURN on the remote to collapse the list. USB:\ / Home Music Photo Video Off On 5 sec 788 X 57 / 4 -.jpg ---- /-- /-- -- : -- P Page -.jpg Resolution: 788 X5 Size: KBytes Date: ---- / -- / -- Time: -- : -- : -- Info Move Select RETURN Back The information will be removed by timeout (about 5 sec) or press to exit. P Page Move Select RETURN Back 4 and press to select One or Folder. Background Music 6 Play List Move Select RETURN Back 4