Cable, Connectors & Adaptors

November 2018 able, onnectors & daptors oaxial cable and terminations

able, s & s ontents page able & onnectors oaxial cable - 50 Ohm cable - 75 Ohm cable - ustom RF cable assemblies - able fitting/accessories onnectors/terminations - 50 Ohm s - 75 Ohm s daptors - 50 Ohm s - 75 Ohm s - Inter series EI s Strain relief, cable grommets and glands rimp sleeves and earth Lugs How to order Terms & conditions of sale ontact us

oxial cable ontents page able & onnectors 50 Ohm cable - 1-5/8 flexible foam dielectric coaxial cable, 50 Ohm - 7/8 flexible foam dielectric coaxial cable, 50 Ohm - 1/2 flexible foam dielectric coaxial cable, 50 Ohm - 1/2 super flexible foam dielectric coaxial cable, 50 Ohm - 1/4 super flexible foam dielectric coaxial cable, 50 Ohm - RU400 low loss coaxial cable, 50 Ohm - RG214/U double-shielded coaxial cable, 50 Ohm - RG213 MIL-SPE coaxial cable, 50 Ohm - RG58 MIL-SPE low loss solid core coaxial cable, 50 Ohm - RG58 /U MIL-SPE stranded coaxial cable, 50 Ohm - RG174 /U MIL-SPE miniature coaxial cable, 50 Ohm - RG316 Teflon Insulated Miniature coaxial cable, 50 Ohm - RG142 teflon insulated miniature coaxial cable, 50 Ohm 75 Ohm cable - RU400-75 low loss coaxial cable, 75 Ohm - RG59 /U MIL-SPE coaxial cable, 75 Ohm RF cable assemblies able fittings - ird-proofing stainless steel braid - Hoist stocking hangers - Stand-off cable s - Snap-in cable hangers - PV cable hangers - ngle s - Tower member cleats - oaxial cable trimming tools - Hand crimp tools - Stainless steel cable tie tensioner tool

ZG1580 1-5/8 flexible foam dielectric 50 Ohm coaxial cable able & onnectors Our 1-5/8 foam flexible dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands on the market. This coaxial cable is available in metre cut lengths, please consult ZG for more information. Specifications Order code - per metre entre conductor Dielectric Outer conductor Jacket 1-5/8 flexible coaxial cable - ZG7850 ZG1580 Smooth copper tube, 17.4mm Physical foam polyethylene (PE), 42.80mm orrugated copper tube, 46.5mm lack polyethylene (PE) or Low smoke halogen-free fire retardant (specify), 49.5mm outside diameter Mechanical specifications Minimum bend radius Installation: 200mm Repeated: 510mm Maximum bends 15 Weight Operating temperature 1.06kg per metre -55 to +85 Electric specifications Impedance 50 Ohm (+/- 1 Ohm) Nominal capacitance 76 pf/m RF Peak Voltage 5.70 kv Velocity of propogation 88% Shielding effectiveness Insulation resistance ut-off frequency >10MHz - >120 d 5000 MΩ/Km 2.8 GHz ttenuation figures on following page...

ZG1580 1-5/8 flexible foam dielectric 50 Ohm coaxial cable able & onnectors ttenuation 100MHz 200MHz 450MHz 800MHz 900MHz 1GHz 1.5GHz 1.8GHz 2GHz 2.2GHz 2.4GHz 2.5GHz Per 100 metres 0.67d 0.98d 1.53d 2.12d 2.28d 2.42d 3.09d 3.45d 3.68d 3.91d 4.13d 4.24d Maximum power 100MHz 200MHz 450MHz 800MHz 900MHz 1GHz 1.5GHz 1.8GHz 2GHz 2.2GHz 2.4GHz 2.5GHz 16,900 Watts 11,600 Watts 7,360 Watts 5,260 Watts 4,930 Watts 4,610 Watts 3,640 Watts 3,270 Watts 3,000 Watts 2,850 Watts 2,700 Watts 2,610 Watts

ZG7850 7/8 flexible foam dielectric 50 Ohm coaxial cable able & onnectors Our 7/8 foam flexible dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands on the market. This coaxial cable is available in metre cut lengths or by the roll, please consult ZG for more information. Specifications Order code - per metre Order code 500m roll entre conductor Dielectric Outer conductor Jacket 7/8 flexible coaxial cable ZG7850 ZG7850 ZG7850-500 Smooth copper tube, 9.3mm Physical foam polyethylene (PE), 22.8mm orrugated copper tube, 25.40mm lack polyethylene (PE) 27.80mm outside diameter - low smoke halogen-free fire retardant available Mechanical Specifications Minimum bend radius Single: 90mm Repeated: 250mm Weight Operating temperature 46Kg per 100 metres -55 to +85 Max number of bands 50 Electric Specifications Impedance Nominal capacitance 50 Ohm 74.0 pf/m Velocity of propogation 89% RF Peak voltage Peak power rating Shielding effectiveness Insulation resistance Maximum frequency 3.00KV 91kW >10MHz >120d 5000MΩ km 4.9GHz ttenuation figures on following page...

ZG7850 7/8 flexible foam dielectric 50 Ohm coaxial cable able & onnectors ttenuation d per 100 metres Maximum power 100MHz 1.16d 7.49kW 150MHz 1.43d 6.05kW 200MHz 1.66d 5.21kW 280MHz 1.99d 4.33kW 450MHz 2.56d 3.39kW 800MHz 3.51d 2.48kW 900MHz 3.75d 2.32kW 1000MHz 3.97d 2.19kW 1500MHz 4.99d 1.74kW 1800MHz 5.54d 1.53kW 2000MHz 5.88d 1.48kW 2200MHz 6.21d 1.42kW 2400MHz 6.54d 1.31kW 2500MHz 6.69d 1.26kW 3000MHz 7.45d 1.17kW

ZG1250 1/2 flexible foam dielectric 50 Ohm coaxial cable able & onnectors Our 1/2 flexible foam dielectric, 50 Ohm coaxial cable has specificationss and attenuation performance to match or surpass all other brands. This coaxial cable is available in metre cut lengths or by the roll, please consult ZG for more information. Specifications Order code - per metre Order code 500m roll entre conductor Dielectric Outer conductor Jacket 1/2 flexible coaxial cable ZG1250 ZG1250 ZG1250-500 opper-clad aluminium wire, 4.8mm Physical foam polyethylene (PE), 12.30mm orrugated copper tube, 13.8mm lack polyethylene (PE), 15.7mm outside diameter - low smoke halogen-free fire retardant available Mechanical specifications Minimum bend radius Installation: 50mm Repeated: 125mm Weight Operating temperature 24Kg per 100 metres -55 to +85 Electric specifications Impedance Nominal capacitance 50 Ohm 76.0 pf/m Velocity of propogation 88% Shielding effectiveness Insulation resistance RF peak voltage Peak power rating Maximum frequency >10MHz >120d 5000MΩ km 1.60kV 40kW 8.8GHz lternative models available 1/2 low smoke, halogen free, ZG1250-LSZH flexible foam dielectric, 50 Ohm ZG1250-LSZH-500 500m roll ttenuation figures on following page...

ZG1250 1/2 flexible foam dielectric 50 Ohm coaxial cable able & onnectors ttenuation Per 100 metres Maximum power 100MHz 2.17d 3.94kW 150MHz 2.67d 3.17kW 200MHz 3.10d 2.75kW 280MHz 3.69d 2.27kW 450MHz 4.74d 1.80kW 800MHz 6.45d 1.33kW 900MHz 6.87d 1.25kW 1000MHz 7.28d 1.18kW 1500MHz 9.08d 0.95kW 1800MHz 10.05d 0.86kW 2000MHz 10.66d 0.81kW 2200MHz 11.24d 0.77kW 2400MHz 11.80d 0.75kW 2500MHz 12.08d 0.73kW 3000MHz 13.39d 0.65kW

ZG1250SF 1/2 super flexible foam dielectric 50 Ohm coaxial cable able & onnectors The Specifications and attenuation performance of our 1/2 super flexible, foam dielectric, 50 Ohm coaxial cable are comparable with any other brand available. This coaxial cable is available in metre cut lengths or by the roll, please consult ZG for more information. Specifications Order code - per metre Order code 500m roll entre conductor Dielectric Outer conductor Jacket 1/2 super flexible coaxial cable ZG1250SF ZG1250SF ZG1250SF-500 opper-clad aluminium wire, 3.60mm Physical foam polyethylene (PE), 9.10mm Helical copper tube, 12.0mm lack polyethylene (PE), 13.3mm outside diameter - low smoke halogen-free fire retardant available Mechanical specifications Minimum bend radius Single: 15mm Repeated: 30mm Weight Operating temperature 20Kg per 100 metres -55 to +85 Electric specifications Impedance Nominal capacitance 50 Ohm 80.0 pf/m Velocity of propogation 82% RF peak voltage Peak power rating Shielding effectiveness Insulation resistance Maximum frequency 1.13kV 19kW >10MHz >120d 5000MΩ km 12.5GHz ttenuation figures on following page...

ZG1250SF 1/2 super flexible foam dielectric 50 Ohm coaxial cable able & onnectors ttenuation Per 100 metres Maximum power 100MHz 3.22d 3.03kW 150MHz 4.05d 2.39kW 200MHz 4.65d 2.11kW 280MHz 5.65d 1.69kW 450MHz 7.20d 1.37kW 800MHz 9.86d 1.00kW 900MHz 10.56d 0.94kW 1000MHz 11.15d 0.88kW 1500MHz 13.80d 0.70kW 1800MHz 15.55d 0.63kW 2000MHz 16.40d 0.59kW 2200MHz 17.35d 0.56kW 2400MHz 18.10d 0.53kW 2500MHz 18.50d 0.52kW 3000MHz 20.90d 0.48kW

ZG1450SF 1/4 super flexible foam dielectric 50 Ohm coaxial cable able & onnectors Our 1/4 super flexible foam dielectric, 50 Ohm coaxial cable has specifications and attenuation performance to match or surpass all other brands on the market. This coaxial cable is available in metre cut lengths, please consult ZG for more information. Specifications Order code - per metre entre conductor Dielectric Outer conductor Jacket 1/4 super flexible coaxial cable ZG1450SF ZG1450SF opper-clad aluminium wire, 1.90mm Physical foam polyethylene (PE), 4.75mm Helical copper tube, 6.35mm lack polyethylene (PE), 7.50mm outside diameter Mechanical specifications Minimum bend radius Single: 12.5mm Repeated: 25.0mm Weight Operating temperature 46Kg per 100 metres -55 to +85 Electric specifications Impedance Nominal capacitance 50 Ohm 80.0 pf/m - 24.4pF/ft Velocity of propogation 83% RF peak voltage Peak power rating Shielding effectiveness Insulation resistance VSWR ut-off frequency 0.80kV 6.40kW >120d 5000MΩ km 800MHz - 1GHz = <1.15 1.7GHz - 2.2GHz = <1.15 2.2GHz - 2.7GHz = <1.15 20.40GHz ttenuation figures on following page...

ZG1450 1/4 super flexible foam dielectric 50 Ohm coaxial cable able & onnectors ttenuation Per 100 metres Maximum power 100MHz 5.60d 1.23kW 150MHz 7.25d 0.95kW 200MHz 8.00d 0.86kW 280MHz 10.20d 0.67kW 450MHz 12.20d 0.57kW 800MHz 16.70d 0.42kW 900MHz 17.50d 0.39kW 1000MHz 18.60d 0.37kW 1500MHz 23.40d 0.30kW 1800MHz 25.70d 0.27kW 2000MHz 26.90d 0.26kW 2200MHz 28.50d 0.25kW 2400MHz 30.00d 0.24kW 2500MHz 30.60d 0.23kW 3000MHz 33.50d 0.21kW

RU400 Low loss solid core 50 Ohm coaxial cable able & onnectors For those longer cable runs or the higher frequency range, this 50 Ohm RU400 cable will provide the low attenuation performance you require. This is a high quality cable equivalent to, and in some cases better than, all other 400 series coaxial cables available on the market today. This coaxial cable is available in 100m or 300m roll, please consult ZG for more information. Specifications RU400 low loss 7890 Order code 100m roll 7890-100 Order code 300m roll 7890-300 entre conductor Dielectric 1st outer conductor 2nd outer conductor Jacket are copper, 2.74mm Foamed polyethylene (PE), 7.24mm Sealed P tape, 7.37mm Tinned copper braid, 98% coverage, 8.17mm lack polyethylene (PE), 10.30mm outside diameter Mechanical specifications Minimum bend radius Weight Operating temperature 72.1mm 14.6Kg per 100 metres -40 to +85 Electrical specifications Impedance Nominal capacitance 50 Ohms (±3 Ohms) 78 pf/m Velocity of propogation 85% D resistance Inner conductor Outer conductor Loop 3.06 Ohms/Km 5.41 Ohms/Km 8.47 Ohms/Km ttenuation figures on following page...

RU400 Low loss solid core 50 Ohm coaxial cable able & onnectors ttenuation 150MHz 220MHz 450MHz 900MHz 1.5GHz 1.8GHz 2GHz 2.4GHz Per 100 metres 5.64d 6.79d 10.24d 14.72d 19.21d 21.22d 22.66d 25.65d Maximum power 150MHz 220MHz 450MHz 900MHz 1000 Watts 830 Watts 550 Watts 380 Watts

RG214/U Double-shielded 50 Ohm coaxial cable able & onnectors Our RF MX brand of double shielded, 50 Ohm RG214/U coaxial cable offers equivalent or improved construction and performance to other brands available. RG214/U is commonly used in test leads and quality installation requiring Low PIM and cross talk. This coaxial cable is available in 100m or 300m roll, please consult ZG for more information. Specifications RG214/U (7808) Order code 100m roll 7808-100 Order code 300m roll 7808-300 entre conductor Dielectric 1st braid coverage 2nd braid coverage Jacket Silver plated copper, 7 strand, 2.24mm Solid polyethylene (PE), 7.25mm 96%, Tinned copper braid 98%, Tinned copper braid lack PV, 1.10mm thick, 10.8mm outside diameter Mechanical specifications Minimum bend radius Static: 55mm Dynamic: 162mm Weight Operating temperature 18.5Kg per 100 metres -40 to +85 Electrical specifications Impedance Maximum frequency Nominal capacitance 50 Ohm 6GHz 100 pf/m Velocity of propogation 66% Sparker test Dielectric strength 4,000 V onductor to shield : 10,000 VD ttenuation figures on following page...

RG214/U Double-shielded 50 Ohm coaxial cable able & onnectors ttenuation Per 100 metres Maximum power 100MHz 5d 1028 Watts 200MHz 9d 727 Watts 300MHz 12d 593 Watts 400MHz 14d 514 Watts 500MHz 16d 460 Watts 600MHz 18d 420 Watts 800MHz 21d 353 Watts 850MHz 22d 353 Watts 900MHz 23d 343 Watts 1GHz 24d 325 Watts 1.8GHz 35d 242 Watts 2GHz 38d 230 Watts 2.4GHz 43d 210 Watts 3GHz 50d 188 Watts 4GHz 61d 163 Watts 5GHz 72d 145 Watts 6GHz 82d 133 Watts

RG213 MIL-SPE 50 Ohm coaxial cable able & onnectors RG213 is a common everyday cable useful for both VHF and UHF applications. This coaxial cable is available in 100m or 300m roll, please consult ZG for more information. Specifications RF MX RG213 7800 Order code 100m roll 7800-100 Order code 300m roll 7800-300 entre conductor Dielectric Outer conductor Jacket are copper, 7 strand x 0.75mm Solid Polyethylene (PE), 7.24mm are copper braid lack polyethylene, 10.30mm outside diameter Mechanical specifications Minimum bend radius Weight Operating temperature 55.5mm 15.3Kg per 100 metres -40 to +85 Electrical specifications Impedance Maximum frequency Nominal capacitance 50 Ohm (± 2 Ohm) 1 GHz 100.7 pf/m Velocity of propogation 66% ttenuation Per 100 metres Maximum power 50MHz 4.80d 1500 Watts 100MHz 6.68d 975 Watts 400MHz 14.19d 450 Watts 700MHz 22.00d 300 Watts 900MHz 26.57d 250 Watts 1GHz 27.50d 230 Watts

RG58 low loss Low loss, solid core MIL-SPE 50 Ohm coaxial cable able & onnectors RG58 low loss solid core MIL-SPE, 50 Ohm coaxial cable is particularly useful for applications such as cellular antenna installations. (UV Rated) This range of RG58 low loss solid core MIL-SPE is available in either white outer jacket or black outer jacket. This coaxial cable is available in 100m or 300m roll, please consult ZG for more information. Specifications RG58 low loss 7839 Order code 100m roll Order code 300m roll entre conductor Dielectric Outer conductor Overall braid Jacket 7839-100 - black only 7839-300 - black or 7839W-300 - white Solid bare copper, 1.02mm Foamed polyethylene 2.95mm (PE) luminium tape Tinned copper, >93% coverage, 16 x 6 x 0.127mm Polyethylene (PE), 4.95mm outside diameter Mechanical specifications Minimum bend radius Weight Operating temperature 25mm single bend, 50mm multiple bends. 30kg per 100 metres -20 to +70 Electrical specifications Impedance Nominal capacitance 50 Ohms 101.0 pf/m Velocity of propogation 66% ttenuation figures on following page...

RG58 low loss Low loss, solid core MIL-SPE 50 Ohm coaxial cable able & onnectors ttentuation 30MHz 50MHz 150MHz 220MHz 450MHz 900MHz 1500MHz 1800MHz 2000MHz 2500MHz Per 100 metres 6.3d 8.1d 14.1d 17.1d 24.6d 35.0d 45.6d 50.1d 53.0d 59.5d

RG58/U Stranded MIL-SPE 50 Ohm coaxial cable able & onnectors RG58/U stranded MIL-SPE, 50 Ohm coaxial cable is suitable for low power applications in the lower frequency range, such as UHF 477MHz communications. This range of RG58 stranded MIL-SPE is available in either white outer jacket or black outer jacket (UV Rated) This coaxial cable is available in 100m or 300m roll, please consult ZG for more information. Specifications RG58 stranded 7803 Order code 100m roll Order code 300m roll entre conductor Dielectric Shield Overall braid Jacket 7803-100 - black only 7803-300 - black or 7803-300/W - white Tinned copper, 19 strand, each 0.18mm Solid polyethylene (PE), 2.95mm onded luminium Foil Tinned copper, 93% coverage, 16 x 6 x0.127mm PV, 4.95mm outside diameter Mechanical specifications Minimum bend radius Weight Operating temperature 25mm single bend 30kg per 100 metres -20 to +75 Electrical specifications Impedance Nominal capacitance 50 Ohm 101.0 pf/m Velocity of propogation 66% Life expectancy 10-15 Years Dry or 3-5 Years Wet ttenuation figures on following page...

RG58/U Stranded MIL-SPE 50 Ohm coaxial cable able & onnectors ttenuation 30MHz 50MHz 150MHz 220MHz 450MHz 900MHz 1500MHz 1800MHz 2000MHz 2500MHz Per 100 metres 7.00d 8.90d 15.5d 18.8d 27.0d 38.5d 50.0d 55.1d 58.3d 65.4d Maximum power 10MHz 50MHz 100MHz 200MHz 400MHz 1GHz 3GHz 5GHz 1,000 Watts 425 Watts 290 Watts 190 Watts 105 Watts 60 Watts 25 Watts 20 Watts

RG174/U Miniature MIL-SPE 50 Ohm coaxial cable able & onnectors RG174/U is a miniature MIL Spec, 50 Ohm coaxial cable useful for frequencies up to 1GHz. Typical uses include connecting electronic and telecommunications equipment or measuring instruments. This coaxial cable is available in 500m roll, please consult ZG for more information. Specifications RG174/U 7877 Order code 500m roll 7877-500 entre conductor Dielectric Overall braid Jacket are copper, 7 x 0.16mm Solid Polyethylene (PE), 1.52mm Tinned plated copper, 2.05mm lack PV, 2.60mm outside diameter Mechanical specifications Minumum bend radius Weight Operating temperature 15.0mm 1.2Kg per 100 metres -20 to +80 Electrical specifications Impedance Nominal capacitance Impedance 50 Ohms 101.5 pf/m 50Ω (Ohms) Velocity of propogation 66% ttenuation - typical 100MHz 400MHz 1000MHz d per 100 metres 27.6d 55.8d 89.9d

RG316 Miniature Teflon Insulated 50 Ohm oaxial able able & onnectors RG316 miniature 50 Ohm, coaxial cable has a silver plated, copper clad, steel centre wire conductor with a teflon dielectric. Telfon insulated coaxial cable assemblies offer superior phase and high temperature stability. RG316 is frequently installed in sensitive areas with minimal space such as avionics equipment bays, medical systems or data link applications up to 3GHz. This coaxial cable is available in 100m or 200m roll, please consult ZG for more information. Specifications RG316 7853 Order code 100m roll 7853-100 Order code 200m roll 7853-200 entre conductor Dielectric Overall braid Jacket Silver plated, copper clad steel, 7 strand x 0.17mm Teflon (PTFE), 1.52mm Silver plated copper braid, 1.95mm Teflon (FEP), 2.50mm outside diameter Mechanical specifications Minimum bend radius 13.0mm Operating temperature -55 to + 200 Electrical specifications Impedance Nominal capacitance 50 Ohms 96.45 pf/m Velocity of propogation 70% Maximum voltage Maximum frequency ttenuation - typical 100MHz 400MHz 1000MHz 3000MHz 1,200 VMS 3GHz d per 100 metres 26.2d 53.1d 85.6d 153.2d

RG142 Miniature, teflon insulated 50 Ohm coaxial cable able & onnectors RG142 miniature 50 Ohm coaxial cable has a silver plated, copper clad steel centre conductor with a teflon dielectric. Telfon insulated coaxial cable assemblies offer superior phase and high temperature stability. RG316 is frequently installed in sensitive areas with minimal space such as avionics equipment bays, medical systems or data link applications up to 3GHz. This coaxial cable is available in a 200m roll, please consult ZG for more information. Specifications RG142 7823 Order code 200m roll 7823-200 entre conductor Dielectric Outer conductor Jacket Silver plated copper clad steel, 0.94mm Teflon PTFE, 2.95mm Silver plated copper double braid, 3.95mm Teflon FEP, 4.95mm outside diameter Mechanical specifications Minumum bend radius 25mm Operating temperature -55 to + 200 Electrical specifications Impedance Nominal capacitance 50 Ohms 96.45 pf/m Velocity of propogation 70% Maximum voltage Maximum frequency ttenuation 100MHz 400MHz 1.2GHz 3GHz 1,900 VMS 8GHz Per 100 metres 13.0d 29.0d 47.0d 89.0d

RU400-75 Low loss solid core 75 Ohm coaxial cable able & onnectors RU400-75 is a high quality, 75 Ohm coaxial cable which delivers excellent low attenuation performance. This cable is therefore ideally suited for those longer cable runs or the higher frequency range. This coaxial cable is available in 300m roll, please consult ZG for more information. Specifications RU400-75 low loss 8121 Order code 300m roll 8121-300 entre conductor Dielectric 1st outer conductor 2nd outer conductor Jacket Solid copper, 1.65mm Foamed polyethylene (PE), 7.24mm luminium tape, 7.39mm Tinned copper braid, 8.13mm lack polyethylene (PE), 10.29mm outside diameter Mechanical specifications Minimum bend radius Installation: 25.4mm Repeated: 101.6mm Weight Operating temperature 10Kg per 100 metres -40 to +85 Electric specifications Impedance Nominal capacitance 75 Ohm 52.3 pf/m Velocity of propogation 85% D resistance Maximum frequency Inner conductor Outer conductor 2.5GHz 8.20 Ohms/Km 7.30 Ohms/Km ttenuation figures on following page...

RU400-75 Low loss solid core 75 Ohm coaxial cable able & onnectors ttenuation 30MHz 50MHz 150MHz 220MHz 450MHz 900MHz 1.5GHz 1.8GHz 2GHz 2.5GHz Per 100 metres 2.1d 2.7d 4.8d 5.8d 8.4d 12.1d 16.0d 17.6d 18.7d 21.1d Maximum power 30MHz 50MHz 150MHz 220MHz 450MHz 900MHz 1.5GHz 1.8GHz 2GHz 2.5GHz 2,990 Watts 2,331 Watts 1,320 Watts 1,080 Watts 740 Watts 520 Watts 390 Watts 350 Watts 330 Watts 300 Watts

RG59/U MIL-SPE 75 Ohm coaxial cable able & onnectors RG59/U is a common everyday use MIL SPE coaxial cable for 75 Ohm applications, particularly television. This coaxial cable is available in 100m roll, please consult ZG for more information. Specifications RG59/U 7807 Order code 100m roll 7807-100 entre conductor Dielectric Overall braid Jacket are copper, 0.58mm Polyethylene 3.64mm are copper braid 16 x 8 0.12mm lack PV, 6.10mm outside diameter Mechanical specifications Minimum bend radius Weight Operating temperature 35.0mm 5Kg per 100 metres -20 to +85 Electrical specifications Impedance Nominal capacitance Echo loss 75 Ohm 52.0 pf/m 20d Velocity of propogation 85% ttenuation figures on following page...

RG59/U MIL-SPE 75 Ohm coaxial cable able & onnectors ttenuation d per 100 metres Maximum power 10MHz 2d 3250 Watts 50MHz 4d 1453 Watts 100MHz 5d 1028 Watts 150MHz 8d 839 Watts 200MHz 9d 727 Watts 300MHz 12d 593 Watts 400MHz 14d 514 Watts 450MHz 15d 484 Watts 500MHz 15d 460 Watts 600MHz 18d 420 Watts 800MHz 21d 363 Watts 850MHz 22d 353 Watts 900MHz 23d 343 Watts 950MHz 23d 333 Watts 1000MHz 24d 325 Watts 1800MHz 35d 242 Watts 1900MHz 37d 236 Watts 2000MHz 38d 230 Watts 2400MHz 43d 210 Watts 3000MHz 50d 188 Watts 4000MHz 61d 163 Watts 5000MHz 72d 145 Watts 6000MHz 82d 133 Watts

ZG can assemble RF cable sets to your specific requirements, ranging from basic patch leads,high-end broadcast branch feeders and high powered feed cables. You may specify your own custom requirements using the Measuring Guide for able ssemblies form on the next page, or enquire about the broad range of cable sets that ZG have to offer. Information requirements when ordering ustom RF cable assemblies ranch feeder or patch leads able & onnectors ZG1580 ZG7850 ZG1250 ZG1250SF - oxial cable type - see ZG s range available RU400 RG213 MIL-SPE RG58/U MIL SPE RG214/U RG58LL MIL SPE RG174/U RG316 RG142 RU400-75 RG59 MIL-SPE - able Length - face of to face of N-type male or female SM/SM/SM male or female - onnector type fitted to end and - onnector type fitted to end N male or female FME male or female MMX male or female TN male or female UHF PL259 male or female FKR male or female 7/16 DIN male or female EI air or foam dielectric Reverse gender or 75 Ohm ar radio - Special requirements - strain relief, grommets or bird proofing - Total number of RF cable assemblies required Updated 8th November 2018

Stainless steel bird-proofing braid is the ideal solution for protection of coaxial cable from damage from birds and other animals, which can result in system failure. ZG recommend the use of stainless steel cable ties to secure the stainless steel braid - P/N 8117. oaxial cable, s, water-proofing and other installation accessories are all available separately. Specifications 7860 Order code - per metre 7860 ird-proofing Stainless steel braid Page 1 of 2 able & onnectors Sizing 6mm I.D. - suits RG58, RG58LL, RG59 or RG142 Specifications 7860-1 Order code - per metre 7860-1 Sizing 3mm I.D. suits RG174/U or RG316 Specifications 7860-2 Order code - per metre 7860-2 Sizing 10mm I.D. - suits RG213, RG214, RU400 or ZG1450 Specifications 7860-3 Order code - per metre 7860-3 Sizing 20mm I.D. Specifications 7860-4 Order code - per metre 7860-4 Sizing 32mm I.D. - suits 7/8 ZG7850 Specifications 7860-5 Order code - per metre 7860-5 Sizing 38mm I.D.

ird-proofing Stainless steel braid Page 2 of 2 able & onnectors Specifications 7860-6 Order code - per metre 7860-6 Sizing 50mm I.D. - suits 1-5/8 ZG1580 Specifications 7860-7 Order code - per metre 7860-7 Sizing 25mm I.D. Specifications 7860-8 Order code - per metre 7860-8 Sizing 12mm I.D. Specifications 7860-9 Order code - per metre 7860-9 Sizing 16mm I.D. suits 1/2 ZG1250 & ZG1250SF Specifications 7860-10 Order code - per metre 7860-10 Sizing 59.3mm I.D.

Hoisting stocking grips For 1/2 or 7/8 coaxial cable able & onnectors Hoisting stockings provide a reliable cable installation method which ensures neither the external cable jacket, foam dielectric or centre core is damaged during the hoisting process. These stockings are re-useable time and time again. The stocking is laced around coaxial cable over a 30cm (1 foot) length. The single or double eyelets allow a high pulling force with the least amount of stress to the coaxial cable. Specifications able Type onstruction Eyelet HS1250 1/2 coaxial cable Non-magnetic, tin coated bronze Double Specifications able Type onstruction Eyelet HS7850 7/8 coaxial cable Non-magnetic, tin coated bronze Single

Stand-off s Pack of 10 able & onnectors When installing 1/2 or 7/8 coaxial feeder cable to any pole or tower structure where there are no holes available to fit cable hangers, then stand-off s are the ideal solution. oaxial feeder cable, s, water-proofing and other installation accessories are all available separately. Specifications Order code onstruction Mount hole diameter Kit includes Mounting accessories Mounting options Stand-off D Stand-off D 304 grade stainless steel 3/4-19mm 10 x stand-off s SH1250, SH7850 or SH1580 - order separate Mount using stainless steel hoseclamp (not supplied)

Snap-in cable hangers Pack of 10 able & onnectors Snap-in cable hangers provide a simple and secure method of installing 1/2 or 7/8 flexible foam coaxial cable to a tower or mast in a variety of attachment options. These hangers are easily pressed over the coaxial cable jacket which is gripped tight by the curved internal fingers with no ability to slip. The snap-in fingers securely lock the coaxial cable in position and resist side-to-side movement in high wind conditions and eliminate inadvertant pop-outs due to excessive galvanised or rounded edges on tower members. oaxial feeder cable, s, water-proofing and other installation accessories are all available separately. Specifications SH1250 SH7850 SH1580 Order code SH1250 SH7850 SH1580 onstruction 304 grade stainless steel able 1/2 cable - ZG1250 7/8 cable - ZG7850 1-58 cable - ZG1580 Kit ontents 10 x SH1250 10 x SH7850 10 x SH1580 Mounting ccessories Suits Stand-off D or NGLE-D - order separate

PV cable hangers Single or double hanging Suits 1/2 or 7/8 able able & onnectors PV cable hanger clamps are a modern solution to install 1/2 or 7/8 foam dielectric coaxial cables. Multiple runs of coaxial cable can be stacked in space saving configurations of parallel rows. Each compact PV hanger clamps holds one or two runs of cable. It is recommended a clamp be placed at one metre intervals. The internal cable gripping ridges press into the cable jacket to provide firm support in heavy winds and ice loading conditions. oaxial cable, s, water-proofing and other installation accessories are all available separately. Specifications PV cable hanger clamps H1250 1/2 able - single H1250 - pack of 10 1/2 able - double HD1250 - pack of 10 7/8 able - single H7850 - pack of 10 onstruction Suitable mounting lack UV resistant PV NGLE-D, RS-310 or threaded rod - order separate HD1250 H7850

NGLE-D ngle s Pack of 10 able & onnectors When installing 1/2 or 7/8 coaxial cable into position up a tower where there are no holes available to fit cable hangers, then angle s will provide the ideal solution. oaxial cable, s, cable ties and other installation accessories are all available separately. Specifications onstruction Tower thickness capability Kit includes: NGLE-D 304 grade stainless steel Up to 22mm - 10 x NGLE D bodies - 10 x 3/8-16 UN square head set screws - 10 x toothed washers - 10 x stainless steel inserts - 10 x short 3/8-16 UN set screws ngle dapters bolt directly to a tower member up to 22 mm thick. Insert a Snap-In able Hanger into the 3/4 (19 mm) hole.

RS-310 Tower member cleats Pack of 10 able & onnectors leats bolt onto a tower member up to 22mm thick, either flat or angle iron, and is securely locked in position by the 35mm long M6-1.0 hex head set screw. There is no need to drill any holes. oaxial cable, cable hangers, lightning protection and other installation accessories are all available separately. Specifications RS-310 Order code RS-310 - pack of 10 onstruction Kit includes: Suitable attachments ast metal alloy - 10 x tower member cleats with 2 M8 holes - 10 x M6 bolts H1250, HD1250 or H7850 - order separate

oaxial cable trimming tool Suits 1/2, 1/2 SF or 7/8 able able & onnectors To prepare 1/2, 1/2 super flexible or 7/8 coaxial cable with neat clean terminations for s, these coaxial cable trimming tools make the task quick, easy, neat and precise. oaxial cable, s and other installation accessories are all available separately. Specifications TT1250 Specifications TT1250SF Order code TT1250 Order code TT1250SF able type Replacement blades 1/2 coaxial cable 1 set - supplied able type Replacement blades 1/2 super flexible coaxial cable 1 set - supplied Specifications TT7850 Order code TT7850 able type 7/8 coaxial cable Replacement blades 1 set - supplied

onnector crimp tools Hand-held crimper Having used various brands of hand crimp tools both in our manufacturing as well as field services departments over the years, ZG can highly recommend these 8.7 hex series tools for fitting s to the more common coaxial types listed below. oaxial cable, s and other installation accessories are all available separately. able, onnectors Specifications rimp handle colour Hex diameter (± 0.1) Sleeve and pin crimping Sleeve crimping only HT336D2 lack 1.72mm (0.068 inch) 5.41mm (0.213 inch) 6.50mm (0.256 inch) 10.89mm (0.429 inch) - RG58 - RG59 - RG62 - RG8 - RG11 - RG213 - RU400 Please note that crimp s for these cables will have a solder pin. Specifications rimp handle colour Hex diameter (± 0.1) Sleeve and pin crimping HT336G Green 1.09mm (0.043 inch) 1.72mm (0.068 inch) 2.54mm (0.100 inch) 3.48mm (0.137 inch) 5.41mm (0.213 inch) 6.48mm (0.255 inch) - RG142 - RG174 - RG316 - RG58 - RG59 - RG62 - Fibre Optic

Stainless steel cable tie tool Hand-held tensioner able & onnectors The stainless steel cable tie tool is designed to fit stainless steel cable ties quickly and easily leaving no sharp ends. oaxial cable, s and other installation accessories are all available separately. Specifications Stainless steel cable tie tensioner Order code 8125 onstruction lack powder-coated steel and ergonomical rubber grips The stainless steel cable tie tool is designed to be used in partnership with 316 grade stainless steel cable ties. Stainless steel order code Specifications 8117 ag of 100, 316 grade, 360mm long x 4.6mm 8117-2 ag of 100, 316 grade, 200mm long x 4.6mm 8117-3 ag of 100, 316 grade, 240mm long x 4.6mm 8117-4 ag of 100, 316 grade, 450mm long x 4.6mm 8117-5 ag of 100, 316 grade, 600mm long x 4.6mm

onnectors & daptors ontents Page able & onnectors onnectors - EI Flange for ir Dielectric - EI Flange for Foam Dielectric - EI Joining ullets - 7/16 DIN onnectors, 50 Ohm - N-type onnectors to suit 1/2, 7/8 & 1-1/4 coaxial cable, 50 Ohm - N-type onnectors to suit RG & RU oaxial able, 50 Ohm - N type onnectors to suit RG & RU oaxial able, 50 Ohm - FME onnectors to suit RG oaxial able, 50 Ohm - SM & SM onnectors to suit RG oaxial able, 50 Ohm - TN onnectors to suit RG oaxial able, 50 Ohm - Mini UHF onnectors to suit RG & RU oaxial able, 50 Ohm - UHF onnectors to suit RG & RU oaxial able, 50 Ohms - MMX onnectors to suit RG oaxial able, 50 Ohm - Reverse Gender onnectors to suit RG oaxial able, 50 Ohm - ar Radio onnectors to suit RG oaxial able - 75 Ohm onnectors to suit RG & RU oaxial able daptors - N-type daptors - UHF & Mini UHF daptors - N daptors - FME & TN daptors - SM & SM daptors - Low PIM N-type & 7/16 DIN daptors Inter Series EI daptors - 7/8 EI daptors - 1-5/8 EI daptors - 3-1/8 EI & 6-1/8 EI daptors Strain Relief, able Grommets & Glands rimp Sleeves and Earth Lugs How to Order Terms & onditions of Sale ontact Us Updated 14th July 2015

EI Flange for ir Dielectric or ir Radiating able ables & onnectors These EI s are designed especially to suit 1-5/8 or 7/8 air dielectric cables. They are available individually, or can be supplied as part of a cable assembly, assembled to your requirements. Specifications Suitable able 78EI7850-7/8 ir Dielectric or ir Radiating able 158EI15850-1-5/8 ir Dielectric able Mating Interface 7/8 EI, ir Stop 1-5/8 EI, ir Stop Maximum Frequency 3.7GHz 3.7GHz onnector Plating hrome hrome Outer Diameter 57mm 87mm Length 76.5mm 120mm Weight 700grams 1.45Kg Joining Kit ontents (supplied) 1 x Joining ullet 1 x O-ring 3 x olts and nuts 6 x Washers 1 x Joining ullet 1 x llen Key 1 x O-ring 4 x olts and Nuts 8 x Washers Updated 26th July 2013

EI Flange onnectors 1/2, 7/8 or 1-5/8 able able & onnectors EI onnectors are ideal for high power transmission installation with metal to metal contact between cable and. No plastic components are used. To join two cables with EI s, two identical flange sockets are fitted to the cables to be joined. capitivated joining bullet is used to make a quick, easy and solderless connection between the two EI flange conductors. oaxial feeder cable, bird proofing and water-proofing and other installation accessories are all available separately. Specifications 78EI1250 78EI7850 158EI15850 able Type 1/2 Foam Dielectric or Radiating able 7/8 Foam Dielectric or Radiating able 1-5/8 Foam Dielectric or Radiating able Mating Interface 7/8 EI 7/8 EI 1-5/8 EI Maximum Frequency 3.7GHz 3.7GHz 3.7GHz onnector Plating Silver Silver Silver Outer Diameter 57mm 57mm 87mm Length 85mm 76.5mm 120mm Weight 280grams 380grams 1.14Kg Joining Kit ontents (supplied) 1 x Joining ullet 2 x O-rings 3 x olts & Nuts 6 x Washers 1 x Joining ullet 2 x O-rings 3 x olts & Nuts 6 Washers 1 x Joining ullet 2 x O-rings 4 x olts & Nuts 8 x Washers Updated 29th October 2014

EI Joining ullets To suit 7/8 or 3-1/8 able & onnectors 1680 EI78 ullet EI318 ullet Joining ullet 1/2 or 7/8 onnectors Joining ullet Kit 1/2 or 7/8 onnectors Joining ullet 3-1/8 onnector EI158 ULLET 3389-3 1677-2 Joining ullet 1-5/8 Flanged onnector Joining ullet 1-5/8 Unflanged onnector Joining ullet 6-1/8 Flanged onnector Updated 21st ugust 2013

7/16 DIN s Suits RG214 to 1-5/8 foam dielectric cables Page 1 of 2 able & onnectors 716DINF400 716DINF1450 716DINF1250 716DINF1250SF 716DINF1580 7/16" DIN female For RU400 cable, 7/16" DIN female 1/2" super flexible cable, 2 kw max power 7/16" DIN female 1-5/8" flexible cable, 2 kw max power 716DINF7850 8215 7/16" DIN female 1/4 flexible cable, 7/16" DIN female 7/8" flexible cable, 2 kw max power Flange mount 7/16" DIN female with o-ring supplied, 2 kw max power 8243 716DINF1140 7/16" DIN female 1/2" flexible cable, 2 kw max power 7/16" DIN female 1-1/4" flexible cable, 2 kw max power 8215-2 Flange mount 7/16" DIN female For RG142 7/16" DIN female clamp For RG213/RG8 7/16 DIN males on following page... Updated 2nd November 2018

7/16 DIN s Suits RG214 to 1-5/8 foam dielectric cables Page 2 of 2 able & onnectors 716DINMRG214 716DINM400 716DINM1450 716DINM1250 716DINM1580 7/16" DIN male For RG214 cable 7/16" DIN male 1/2" flexible cable 2 kw max power 7/16" DIN male 1-5/8" flexible cable, 2 kw max power 7/16" DIN male For RU400 cable 716DINM1250SF 7/16" DIN male 1/2" super flexible cable, 2 kw max power 716DINRM1250 Right-angle 7/16" DIN male to suit 1/2" flexible cable, 2 kw max power 716DINM7850 7/16" DIN male 1/4" flexible cable 7/16" DIN male 7/8" flexible cable, 2 kw max power 716DINRM1250SF Right-angle 7/16" DIN male to suit 1/2" super flexible cable, 2 kw max power Updated 2nd November 2018

able & onnectors N-type s Suits 1/2, 7/8 or 1-14 foam dielectric cables 50 Ohm NM1450SF NF1250 NM1250 N-type male 1/4" super flexible cable N-type female 1/2" flexible cable N-type male 1/2" flexible cable 8237 Right-angle N-type male 1/2" flexible cable NF1250SF N-type female 1/2" super flexible cable NM1250SF N-type male 1/2" super flexible cable NF7850 NM7850 N-type female 7/8" flexible cable N-type male 7/8" flexible cable 8255 8256 N-type male 1-1/4" corrugated cable N-type female 1-1/4" corrugated cable onnector glue required for internal water-proofing onnector glue required for internal water-proofing 8614-3 onnector glue for s onnector glue required for internal water-proofing

able & onnectors N-type female s Suits RG & RU cables Page 1 of 2 7914 7915 7915-2 N-type female flange mount receptacle N-type female SHM receptacle N-type female SHM receptable No washer or nut = 4.0 mm = 4.0 mm = 4.0 mm 7915-4 7916 7918 N-type female SHM receptacle 75 Ohm N-type female solder pin clamp For RG213 cable N-type female solder pin clamp = 4.0 mm = 10.0 mm = 5.0 mm = = = 7.0 mm 2.0 mm 5.0 mm 7923 7923-2 7923-5 N-type female with solder pin For RG59 cable N-type female solder pin clamp For RG59 cable N-type female solder pin clamp For RG59 cable Nickel plated 7930-2 = 14.5 mm = 7.0 mm = 5.0 mm 7932 = = = 7.0 mm 2.0 mm 5.0 mm 7932-3 For strip dimensions consult ZG N-type female with solder pin For RU400/RG8 cable N-type female bulkhead mount solder For RG214 cable N-type female bulkhead mount For RG214 cable = = 8.0 mm 4.0 mm = 4.0 mm = 18.0 mm = 5.8 mm = 4.5 mm 7932-7 N-type female bulkhead mount crimp For RU400 cable = 15.4 mm = 4.0 mm

able & onnectors N-type female s Suits RG & RU cables Page 2 of 2 7938 N-type female 7939 N-type female For RG213 cable 7939-2 N-type female For RG213 cable Nickel plated = 19.0 mm = 8.0 mm = 4.0 mm = 15.4 mm = 4.0 mm = 15.4 mm = 4.0 mm 7997 N-type female flange mount solder 7998 N-type female bulkhead mount 7998-1 N-type female bulkhead mount For RG214 cable = = 8.0 mm 4.0 mm = 15.2 mm = 7.7 mm = 5.0 mm = 18.0 mm = 5.8 mm = 4.5 mm 8227 N-type female For RU400/RG8 cable 8278-2 N-type female bulkhead mount crimp For RG174/RG316 cable 8278-3 N-type female with colder pin For RG174/RG316 cable = 14.0 mm = 9.0 mm = 5.0 mm = = = 7.0 mm 2.0 mm 5.0 mm = 14.5 mm = 7.0 mm = 5.0 mm 7925 7932-2 7984 N-type cable termination screw mount N-type cable feed through crimp For RG214 able N-type female cap and chain

able & onnectors N-type male s Suits RG & RU cables Page 1 of 2 7913 7917 7917-2 N-type male solder clamp style For RG213 cable N-type male solder N-type male solder LK = 8.5 mm = 7.0 mm = 7.0 mm = 4.0 mm = 4.0 mm = 4.0 mm 7923-4 7930 7930-4 N-type male For RG59 cable N-type male solder For RU400/RG8 cable N-type male solderless clamp For RU400/RG8 cable = 14.2 mm = 6.7 mm = 3.5 mm = 12.0 mm = 7.0 mm = 9.0 mm Fitting Instructions are supplied 7932-4 Right-angle N-type male For RG214 cable 7933-2 N-type male 7933-3 N-type male = 20.0 mm = 5.0 mm = 14.2 mm = 6.7 mm = 3.5 mm Nickel plated = mm = mm = mm 7937 7937-2 7925 N-type male For RG213 cable = 15.4 mm = 7.9 mm = 4.0 mm N-type male For RG214 cable = 15.4 mm = 7.9 mm = 4.0 mm N-type cable termination screw mount

able & onnectors N-type male s Suits RG & RU cables Page 2 of 2 8200 8201 8219 N-type male For RG142 cable Right-angle N-type male For RG142 cable Right-angle N-type male solder = 15.4 mm = 7.9 mm = 4.0 mm = 15.4 mm = 7.9 mm = 4.0 mm = 15.0 mm = 5.0 mm = 3.0 mm 8226 8266-2 8278 N-type male For RU400/RG8 cable N-type male solder For RU400/RG8 cable N-type male For RG174/RG316 cable = 15.0 mm = 5.0 mm = 12.0 mm = 7.0 mm = 10.0 mm = 5.0 mm = 3.0 mm 8283 8286 8303 N-type male For RG223 cable = 10.0 mm = 5.0 mm Right-angle N-type male crimp with solder pin For RU400/ RG8 cable = 23.0 mm = 9.0 mm = 4.0 mm N-type male For RG142 cable = = 7.0 mm 4.0 mm 8266 N-type male 75 Ohm solderless clamp RU400-75 cable Fitting Instructions are supplied with

N/STI s 50 Ohm and 75 Ohm Page 1 of 2 able & onnectors 7920 7921-3 7936 N male solder Right-angle N male For RG59 cable N male solder For RG213 cable = 13.0 mm = 9.0 mm = 4.0 mm = 17.0 mm = 12.0 mm = 3.0 mm = 15.0 mm = 7.0 mm = 8.0 mm 7936-2 7936-3 7936-4 N male solder For RU400 cable N male solder For RG214 cable N male For RG214/RG225 cable = 15.0 mm = 7.0 mm = 8.0 mm = 15.0 mm = 7.0 mm = 8.0 mm For strip dimensions consult ZG 7936-5 7965 7988 N male For RG142 cable N male Reverse N male For strip dimensions consult ZG = 16.1 mm = 8.6 mm = 4.0 mm = 18.0 mm = 9.0 mm = 4.0 mm 7999 8265 8269 N male square cut solder Right-angle N male solder For RG174/RG316 cable N male solder For RG174/RG316 cable = 15.0 mm = 7.0 mm = 8.0 mm = 11.4 mm = 3.7 mm = 10.0 mm = 5.0 mm = 4.5 mm 8269-2 N male For RG174/RG316 cable For strip dimensions consult ZG

N/STI s 50 Ohm and 75 Ohm Page 2 of 2 able & onnectors 7892 7921-2 7921-4 N female N female N female For RG402 cable = 15.0 mm = 7.0 mm = 8.0 mm = 14.7 mm = 7.2 mm = 4.0 mm For strip dimensions consult ZG 7929 7929-2 7951 N female bulkhead mount N female bulkhead mount N female bulkhead mount For RG174/RG316 cable = 5.0 mm = 5.0 mm = 11.5 mm = 7.0 mm = 4.0 mm 7951-2 7962 N female For RG316 cable N female flange mount receptacle For strip dimensions consult ZG = 5.0 mm 8267 7978-2 7978-3 N male 75 Ohm solder For RU400-75 cable N male 75 Ohm solder For RG174/RG316 cable N male 75 Ohm solder For RG11 cable = 10.0 mm = 5.0 mm = 5.0 mm = 10.0 mm = 5.0 mm = 4.5 mm = 14.0 mm = 2.5 mm 7962-4 7962-2 7962-3 N square mount For RG58 N female 75 Ohm flange mount receptacle N female 75 Ohm flange mount receptacle For strip dimensions consult ZG = 5.0 mm = 5.0 mm

FME s 50 Ohm able & onnectors 7976 7976-2 8273 FME female Right-angle FME female FME female For RG174/RG316 cable = 17.5 mm = 9.0 mm = 4.5 mm = = = mm mm mm = 16.0 mm = 6.0 mm = 4.0 mm 7906 8273-2 FME male FME male For RG174/RG316 cable = 15.0 mm = 6.5 mm = 4.0 mm For strip dimensions consult ZG

SM, SM & SM s Page 1 of 3 able & onnectors 7901 SM male For RG174/RG316 cable 7901-3 SM male For RG174/RG316 cable 7963-3 Right-angle SM male, crimp sleeve with solder pin = 12.0 mm = 5.0 mm = 3.0 mm = 10.0 mm = 4.5 mm = 2.0 mm = 14.0 mm = 3.0 mm 7963-4 7963-7 7963-8 Reverse SM male SM male For RG58/RG223 cable SM male right-angle For RG316/RG174 cable = 13.0 mm = 5.5 mm = 2.5 mm = 11.0 mm = 5.0 mm = 3.0 mm = For strip = dimensions = consult ZG 7963-10 7963-13 7963-14 Reverse SM male For RG174 cable SM male right-angle For RG316/RG118/ RG174 cable SM male right-angle For RG179 cable = 12.1 mm = 5.1 mm = 3.3 mm = 12.6 mm = 5.8 mm = 2.5 mm = For strip = dimensions = consult ZG 8204 8225 8277 SM male RG142 cable sucoplated SM male For RG178 cable Right-angle SM male For RG178/RG316 cable Gold plated For strip dimensions consult ZG For strip dimensions consult ZG For strip dimensions consult ZG 8313 SM male For RU400 cable = 11.0 mm FOLD RID K = 4.25 mm

SM, SM & SM s Page 2 of 3 able & onnectors 7901-2 SM female bulkhead crimp For RG174/RG316 cable 7901-4 SM female bulkhead crimp For RG178 cable 7901-5 SM female For RG174/RG316 cable = 11.0 mm = 5.0 mm = 3.0 mm = 11.0 mm = 5.0 mm = 3.0 mm = 11.0 mm = 5.0 mm = 3.0 mm 7901-6 SM female bulkhead For RG179 cable 7901-7 SM female reverse polarity bulkhead For RG316/RG174 cable 7950 SM female panel mount solder = For strip = dimensions = consult ZG = For strip = dimensions = consult ZG = 4.0 mm 7963-2 SM female 8205 SM female panel mount solder sucoplated 8225-2 SM female bulkhead crimp For RG178 cable = 13.0 mm = 5.5 mm = 2.5 mm = 13.0 mm = 5.5 mm = 2.5 mm For strip dimensions consult ZG 8268 8313-2 Reverse SM female SM female For RU400 cable = 13.0 mm = 5.5 mm = 2.5 mm = 11.0 mm FOLD RID K = 4.25 mm SM s on the following page.

SM, SM & SM s Page 3 of 3 able & onnectors 8279 8279-2 8279-3 SM male For RG174/RG316 cable SM female For RG174/RG316 cable SM male right-angle For RG179 cable = 11.1 mm = 4.5 mm = 2.5 mm = = = For strip dimensions consult ZG = For strip = dimensions = consult ZG 8296 8304 8304-2 SM male For RG174/RG316 cable SM reverse male For RG174/RG316 cable Reverse SM female For RG174/RG316 cable For strip dimensions consult ZG = 11.1 mm = 4.5 mm = 2.5 mm = 13.0 mm = 5.5 mm = 2.5 mm

TN s 50 Ohms Page 1 of 2 able & onnectors 7902 Reverse TN male 7902-3 Reverse TN male For RG174 cable 7922 TN male solder clamp style = 15.5 mm = 6.5 mm = 3.5 mm For strip dimensions consult ZG = 8.5 mm = 4.0 mm 7930-5 7943 7943-2 TN male For RU400/RG8 cable TN male with solder pin TN male with solder pin RG58 cable = 15 mm = 5.0 mm = 15.5 mm = 6.5 mm = 3.5 mm = 15.5 mm = 6.5 mm = 3.5 mm 7943-3 7943-4 7958-2 lack TN male with solder pin TN male with crimp pin lack MIL-SPE TN male = 15.5 mm = 6.5 mm = 3.5 mm = 15.5 mm = 6.5 mm = 3.5 mm = 15.5 mm = 6.5 mm = 3.5 mm 7983 8206 8206-2 TN male with M6 thread TN male sucoplated MIL-SPE black TN male clamp = 15.5 mm = 6.5 mm = 3.5 mm For strip dimensions consult ZG 8224 8239 TN male For RG174/RG316 cable Reverse TN male For RU400 cable = 17.5 mm = 9.5 mm = 4.5 mm For strip dimensions consult ZG

TN s 50 Ohms Page 2 of 2 able & onnectors 7907-2 7930-6 7967 TN female bulkhead mount, crimp sleeve with solder pin TN female For RU400 cable TN female = 15.5 mm = 6.5 mm = 3.5 mm = 14.0 mm = 5.0 mm = 15.5 mm = 6.5 mm = 3.5 mm 8207 8238 TN female bulkhead mount TN female For RU400 cable = 4.0 mm For strip dimensions consult ZG

Mini-UHF s 50 Ohm able & onnectors 7941 7941-1 7941-2 Mini-UHF female panel flange mount solder Mini-UHF female Mini-UHF male = 4.0 mm = 15.0 mm = 4.0 mm = 13.0 mm = 5.5 mm = 3.0 mm 7941-2 7941-3 Mini-UHF male For RG59 cable = 13.0 mm = 5.5 mm = 3.0 mm

able & onnectors UHF & mini-uhf s 50 Ohms Page 1 of 2 7900 7904 7908 UHF male solder Known as PL259 UHF male solder For RG213 cable UHF male solder clamp style For RG213/RG214/ RU400/RG11 or RG8 cable = 20.0 mm = 15.0 mm = 13.0 mm For strip dimensions consult ZG For strip dimensions consult ZG 7908 7909 7910 lack UHF male solder clamp style For RG213/RG214/ RU400/RG11 or RG8 cable UHF male solder clamp style UHF male For RG213 cable For strip dimensions consult ZG For strip dimensions consult ZG For strip dimensions consult ZG 7942 UHF male rimp pin 7942-2 UHF male Solder pin 7911 UHF female SHM receptacle 1/2 UNEF thread For strip dimensions consult ZG For strip dimensions consult ZG = 4.0 mm 7911-2 7912 7934 UHF female bulkhead mount No nut or washer 5/8 UNEF thread UHF female solder clamp style For RG213 cable UHF female solder clamp style = 17.0 mm = 17.0 mm = 4.0 mm = 4.0 mm = 4.0 mm UHF & Mini UHF s on following page...

able & onnectors UHF & mini-uhf s 50 Ohms Page 2 of 2 7934-3 UHF female solder mounting base 7934-4 UHF female clamp bulkhead For RG213 cable 7994 Right-angle UHF female solder Mounts to any bracket with 17 mm diam hole = 9.5.mm = 2 mm = 4 mm For strip dimensions consult ZG = 15.0 mm = 10.0 mm = 4.5 mm 7941 7941-1 Mini-UHF female panel flange mount solder Mini-UHF female = 15.0 mm = 4.0 mm = 4.0 mm 7941-2 7941-3 Mini-UHF male Mini-UHF male For RG59 cable = 13.0 mm = 5.5 mm = 3.0 mm = 13.0 mm = 5.5 mm = 3.0 mm

able & onnectors MMX & Fakra s 50 Ohm Page 1 of 2 8242 8242-2 8242-3 Right-angle MMX male solder For RG174/RG316 cable Right-angle MX male solder For RG174/RG316 cable MX mini UHF male gold plated For RG58 Up to 6GHz = = = 8.1 mm 3.6 mm 1.3 mm For strip dimensions consult ZG For strip dimensions consult ZG 8242-4 8242-5 8318 MMX female crimp gold plated For RG174 Up to 6GHz MX female crimp gold plated For RG174 Up to 6GHz TS-9 straight male For RG174 For strip dimensions consult ZG For strip dimensions consult ZG For strip dimensions consult ZG FKR s on following page... Updated 29th October 2014

able & onnectors MMX & Fakra s 50 Ohm Page 2 of 2 8301 8301-2 8301-3 Fakra SM male with solder pin RG58 low loss cable ode D Mobile phone/cellular = = = 9.0 mm 4.0 mm 2.0 mm Fakra SM female with solder pin and violet clip RG58 low loss cable ode D Mobile phone/cellular ordeaux violet 4004 ordeaux violet 4004 Signal blue 5005 = = = 9.0 mm 4.0 mm 2.0 mm Fakra SM female with solder pin ode GPS = = = 9.0 mm 4.0 mm 2.0 mm 8301-5 8301-6 8301-7 Fakra SM female with solder pin ode D+ with power = = = 9.0 mm 4.0 mm 2.0 mm Fakra SM female with solder pin ode K SDRS Satellite Signal white 9003 urry yellow 1027 Signal blue 5005 = = = 9.0 mm 4.0 mm 2.0 mm Fakra SM male with solder pin ode GPS = = = 9.0 mm 4.0 mm 2.0 mm 8301-8 8301-9 8301-10 eige 1001 Fakra SM male with solder pin ode I luetooth = = = 9.0 mm 4.0 mm 2.0 mm urry yellow 1027 Fakra SM male with solder pin ode K SDR Satellite = = = 9.0 mm 4.0 mm 2.0 mm Pastel green 6019 Fakra SM male with solder pin For RG174/U cable ode N = = = 9.0 mm 4.0 mm 2.0 mm Updated 29th October 2014

Reverse gender s 50 Ohm able & onnectors 7902 7902-2 7902-3 Reverse TN male Reverse TN female clamp Reverse TN male For RG174 cable = 15.5 mm = 6.5 mm = 3.5 mm For strip dimensions consult ZG For strip dimensions consult ZG 7963-4 7963-10 7988 Reverse SM male For RG174 cable Reverse SM male Reverse N male = 13.0 mm = 5.5 mm = 2.5 mm = 13.0 mm = 5.5 mm = 2.5 mm = 18.0 mm = 9.0 mm = 4.0 mm 8239 8268 8304 Reverse TN male For RU400 cable Reverse SM female SM reverse male For RG174/RG316 cable = 15.5 mm = 6.5 mm = 3.5 mm = 13.0 mm = 5.5 mm = 2.5 mm = 11.1 mm = 4.5 mm = 2.5 mm 8304-2 Reverse SM female For RG174/RG316 cable = 13.0 mm = 5.5 mm = 2.5 mm

ar radio To suit RG58 cable able & onnectors 7966 7966-2 ar radio male solderless ar radio male solder no shell = = 7.0 mm 5.0 mm = 40.0 mm = 13.0 mm = 20.0 mm omponents of 7966 car radio solderless

75 Ohm s N-type, N & F-type able & onnectors 7915-4 7962-2 7962-3 N-type female bulkhead mount N female flange mount N female bulkhead mount = 4.0 mm 7978-2 = 4.0 mm 7978-3 = 4.0 mm 7978-4 N male For RG59 cable N male For RG11 cable N male = 13.0 mm = 3.0 mm = 14.0 mm = 2.5 mm For strip dimensions consult ZG 8267 8289-1 8261 N male solder pin clamp style For RU400-75 cable F-type male For RG59/RG6 cable N-type female For RG59 cable = 10.0 mm = 5.0 mm = 5.0 mm = 10.0 mm = 5.0 mm = 4.0 mm = 13.0 mm = 2.5 mm 8262 8263 8266 N-type female For RG6 cable N-type female For RG11 cable N-type male solder pin clamp style For RU400-75 cable 8289 = 13.0 mm = 2.5 mm 8289 = 13.0 mm = 3.0 mm 8257 = 10.0 mm = 5.0 mm = 4.0 mm F-type male For RU400-75 cable F-type male For RU11 cable Pin for 8261 or 8263 N-type female crimp For RG59/RG11 cable 8257-2 For strip dimensions consult ZG For strip dimensions consult ZG Pin for 8262 N-type female For RG6 cable

N-type s N-type female or N-type male able & onnectors 7944 7964 7964-2 Right-angle N-type male to N-type female N-type male to UHF female N-type female to UHF male 7973 7974 7974-2 N-type male to N-type male N-type female to UHF male N-type male to TN female 7975 7975-2 7986 N-type male to N/STI female N-type male to SM female daptor ulkhead mount N-type female to N-type female 7986-2 8246 8247 ulkhead flange N-type female to N-type female N-type female to N-type female T N-type male to N-type female male T 8297 8297-2 N-type female to SM male N-type male to SM male

UHF and mini-uhf s able & onnectors 7944-1 7946 7959 Right-angle UHF male to UHF female T-piece UHF female to UHF male to UHF female UHF female to UHF female 7961 7961-2 7964 UHF female to N male UHF male to N female UHF female to N-type male 7964-2 7977 8299 UHF male to N-type female UHF male to FME male Mini-UHF female to SM female

N/STI s 50 Ohm or 75 Ohm able & onnectors 7895 7895-2 7905 ulkhead mount N female to N female ulkhead mount N female 75 Ohm to N female 75 Ohm N female to N female 7905-2 7961 7961-2 N female to SM male N female to UHF female N female to UHF male 7975 8270 8288 N female to N-type male Right-angle N male to N female N male to N-type female 8288-2 N female to N-type female

FME & TN s 50 Ohms able & onnectors 7977 7977-2 8275 FME male to UHF male FME male to TN male FME male to SM male 8275-2 8281 ulkhead FME male to FME male FME female to SM female 7974 7974-2 7977-2 TN male to N-type female TN female to N-type male TN male to FME male 7996 TN female to TN female

SM & SM s 50 Ohms able & onnectors 7905-2 7975-2 8274 SM male to N female SM female to N-type male Right-angle SM male to SM female 8275 8280 8281 SM male to FME male SM female to SM female SM female to FME female 8282 8282-2 8282-3 SM male to SM male SM male to SM male SM female to SM female 8297 8297-2 SM male to N-type female SM male to N-type male

s N-Type & 7/16 DIN Passive inter-modulation (P.I.M.) able & onnectors 8228 N-type male to N-type female 8229 N-type male to N-type male 8230 N-type female to N-type female 8231 N-type male to 7/16" DIN female 8232 N-type female to 7/16" DIN male 8233 N-type male to 7/16" DIN male 8234 7/16" DIN male to 7/16" DIN male 8235 7/16" DIN male to 7/16" DIN female 8236 7/16" DIN female to 7/16" DIN female

Inter series s 7/8 EI, 1-5/8 EI, 3-1/8 EI & 6-1/8 EI Page 1 of 4 able & onnectors Inter series EI s are constructed from high quality brass and teflon components providing high level performance and reliability. The s can be used for field testing applications or permanent interconnection between equipment. ll of these s are built to order. ombination Kits can be assembled to suit your requirements. Key features: ÂÂ High Quality omponents ÂÂ Frequency Range : 40 MHz 1 GHz ÂÂ haracteristic Impedance : 50 Ohm ÂÂ Rugged onstruction pplications: ÂÂ roadcast Measurements ÂÂ ellular Measurements ÂÂ Test and Measurement ÂÂ Permanent Interconnection Typical Response Performance: ÂÂ Low Thru-Loss : 0.01 d ÂÂ Return Loss : < -26 d over band ÂÂ VSWR : < 0.043:1 ÂÂ Impedance : 50 Ω ± 2.0 Ω

Inter series s 7/8 EI daptors Page 2 of 4 able & onnectors EI78F-NJ EI78F-NP EI78F-716F-S 7/8" EI flanged to N-type female 500 Watts 7/8" EI flanged to N-type male, includes 7/8" EI joining bullet, 500 Watts 7/8" EI flanged to 7/16" DIN female, includes 7/8" EI joining bullet, 2kW EI78F-716M-S EI78F716MR 7/8" EI flanged to 7/16" DIN male, includes 7/8" EI joining bullet, 2kW -1680 7/8" EI flanged to 7/16" DIN male right-angle, includes 7/8" EI aoining bullet, 2kW EI78 ULLET Joining bullet only for 7/8" EI ullet kit for 7/8" EI, includes o-ring and 3 x nuts, bolts & washers

Inter series s 1-5/8 EI Page 3 of 4 able & onnectors EI158F-NJ EI158U-78F EI158F-78FPL 1-5/8" EI flanged to N-type female 500 Watts EI158U-158F 1-5/8" EI un-flanged to 7/8" EI flanged 5kW -8321 1-5/8" EI alanged to 7/8" EI flanged 5kW -8322 1-5/8" EI un-flanged to 1-5/8" EI flanged 5kW 1-5/8" EI unflanged to 1-5/8" EI unflanged elbow - nickel plated 1-5/8" EI slip coupling for rigid line - includes 2 x 27/51 hose clamps EI158 ULLET -3389-3 Joining bullet for 1-5/8" EI flanged Joining bullet for 1-5/8" EI un-flanged

Inter series s 3-1/8 EI or 6-1/8 EI Page 4 of 4 able & onnectors EI318U-78F EI318 ULLET 3-1/8" EI un-flanged to 7/8" EI flanged 5kW Joining bullet only for 3-1/8" EI EI618F-NJ 6-1/8" EI flanged to N-type female, includes 6-1/8" EI ullet, 500 Watts

able & onnectors Strain relief, cable grommets & glands 7945 7945-3 lack rubber strain relief Red rubber strain relief For RG59 cable 5591 5591-2 Pack of 100 nitrile rubber firewall grommets with internal 5.5mm diameter hole to suit RG58 cable. Fit 9.5mm diameter hole and up to 3mm wall plate thickness. Single nitrile rubber firewall grommet with internal 5.5mm diameter hole to suit RG58 cable. Fit 9.5mm diameter hole and up to 3 mm wall plate thickness. 8485 8485-2 8485-3 UV stabilised black PV cable gland 5-10mm UV stabilised black PV cable gland 11-17mm ream PV cable gland 5-10mm 8485-4 8485-5 ream PV cable gland 18-24mm UV stabilised black PV cable gland 7/8

able & onnectors rimp sleeve & earth lugs 7928 7928-2 7932-6 rimp sleeve For RG59 cable rimp sleeve rimp sleeve For RG214 cable 7953 7953-2 7954 Earth lug solder or crimp suits 6mm stud & 3mm wire Earth lug solder or crimp suit 8mm stud & 3mm wire Earth lug solder or crimp suit 6mm stud & 5.5mm wire 7955 7956 7972 Earth lug solder or crimp suit 5mm stud & 2mm wire Earth lug silver plated solder or crimp suit 6mm stud & 4.5mm wire Earth lug solder or crimp suit 6mm stud & 7mm wire

ccessories Stainless Steel & lack Nylon able Ties Page 1 of 2 able & onnectors able ties, either Stainless Steel or lack nylon are a crucial accessories for any antenna installation. PV tape, amalgamation tape, grommets and other installation accessories are all available separately. Stainless Steel Order ode Specifications 8117 ag of 100, 316 Grade, 360mm long x 4.6mm 8117-2 ag of 100, 316 grade, 200mm long x 4.6mm 8117-4 ag of 100, 316 grade, 450mm long x 4.6mm 8117-5 ag of 100, 316 grade, 600mm long x 4.6mm 8125 Stainless steel cable tie tensioner required to tighten stainless steel cable ties. Fits cable ties quick, easy and neat. lack Nylon Order ode Specifications 8528-1 ag of 100, 100mm long 8529 ag of 100, 200mm long 8530 ag of 100, 300mm long Updated 8th November 2018

ccessories Water-proofing Page 2 of 2 able & onnectors Water-proofing is an crucial step in any antenna installation whether it s a vehicle mount, marine, fixed position or broadcast, correct water-proofing can lengthen the life of your antenna system. 8651 onsult ZG s installation guides or ZG s sales team for advice on correct water-proofing for your requirements. Order odes 8651 8574 Specifications PV electrical insulating tape, black, 19mm wide x 0.18mm thick, 20 metre roll Self-bonding amalgamating electrical tape, 19mm wide x 0.76mm thick, 9.15m roll 8574 able Gland Order ode Specifications 8485 lack PV, 5-10mm capability 8485 8485-2 lack PV, 11-17mm capability 8485-3 ream PV, 5-10mm capability 8485-4 ream PV, 18-24mm capability 8485-5 lack PV, suitable for 7/8 cable able Grommet Order ode Specifications 5591 ag 100, Nitrile grommet for RG58 5591-2 Single Nitrile grommet for RG58 Updated 8th November 2018