TOUESHOOTING Problem Possible Causes No picture, no sound Improper connection with 12v power adapter. Use of unauthorized power supply. Power Switch is on O position No picture Check whether AV cable is securely plugged in No sound Check whether audio connector is secure, or the sound volume is turned off or down Dark picture Ensure that bright and contrast settings are properly adjusted. Ensure monitor is warm enough No color Ensure color settings are properly adjusted in menu Upside down or lateral inverted picture Check horizontal/vertical adjustment on remote. No car-backing function (i.e. Picture) Event trigger is not securely connected emote Controller ault attery may be dead or improperly installed: replacement battery Model:C2025,3V Quad View ing System User Guide Part Numbers: DMOV-7MQ-C2 emote controller is not pointed in the direction of the receiving sensor: Make sure remote is pointed at the monitor ong distance or improper angle: The effective distance between the remote controller and the receiving sensor is 7 meters and the angle is ±30. Obstacle: Move any obstacles out of the path Dakota Micro, Inc. 8659 148th Ave. SE Cayuga, ND 58013 www.dakotamicro.com www.dakotamicro.com
Consumer imited Warranty (North America ONY) EATUES 7 ED acklit, high resolution TT CD screen capable of displaying 4 cameras Wide voltage input: 11-32V 4 Channel Inputs, displays 4 images simultaneously Manual or automatic image switching modes orward/mirror image selection Event Triggers provided for all 4 cameras. Cameras can be triggered for events such as backing up or door opening Power provided to only active camera, prolonging the life of the cameras. AV input and output jacks provided Auto ON/O ED sensor automatically triggers night vision when required Includes credit card style remote control acklit control buttons enable easy menu navigation in all lighting conditions NOTES Please read entire manual before using our products efore you power your rear view monitoring system, ensure that all cables are properly connected to avoid damage to the system IS NOT WATEPOO, please do not place the monitor outdoors Ensure that all cables are routed a sufficient distance from high temperature areas and rotary objects To ensure proper heat dispersal, ensure that vent holes in monitor remain clear Do not open the monitor or camera casing, doing so will void the warranty DO NOT watch DVD s etc. while driving Please do not use caustic chemicals to wipe the camera and/or monitor Dakota Micro, Inc. (Hereinafter referred to as DM) warrants to the first consumer purchaser that this DM brand product will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of 18 (eighteen) months. Warranty extends throughout North America (US & Canada). 1 year warranty applies to all other geographic locations unless otherwise states in writing by DM. This warranty does not apply to any appearance items of the product nor any part of the exterior of the product which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. Neither the sales personnel of the seller, nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of DM. The warranties described herein shall be the sole and exclusive warranties granted by DM and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of DM to the purchaser with respect to the product. DM shall not be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you. Any action at law, suit in equity, or other judicial proceeding for the enforcement of any warranty provided for herein or otherwise, will be instituted only in the Courts of the State of North Dakota, the laws of which shall govern. WANING There are no reparable parts in the system, so please do not attempt to This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. take apart the camera or the monitor should a malfunction occur, doing so will void your warranty. Call the factory at 1 866 462-4226 for repair issues. 1 10
Included Components I. Introduction ED acklit CD Screen Sun Visor A/V output remote control w/ bracket x2 Camera(s) w/ bracket Power/Video harness x2 20M power/video cables Earphone emote eceiver VolVol+ Menu Down Up/ Selection 12v lighter adaptor racket Quad View Mode Switch Connection Chart 12v power USE (lack) (Yellow) (White) (ed) 1) Cameras 1-4 have an available event trigger wire. Cameras are identified as (front), (ack), (eft) and (ight) 2) egardless if monitor is ON or in Standby mode, if power is applied to the trigger, activated camera will become powered 3) Camera has highest priority, camera the lowest. Example: if both camera and are triggered simultaneously, camera will take precedence. 4) Peripheral DV trigger cable 1. When the monitor is in quad view or front and back view, the cable has a DC12V output. 2. When the back trigger cable makes the monitor activated, the peripheral DV trigger cable has a DC12V output * Event Trigger wire colors are subject to change without notice and may vary slightly from colors indicated above. 9 CDS Sensor for controlling the button backlights. DO NOT OCK (Yellow)Video Output (ed) Audio Output (Yellow*)Trigger Cable for DV (Green*)Trigger Cable for (lue*)trigger Cable for (White*)Trigger Cable for (rown*)trigger Cable for DVI24+1Plug connector with screws ON/O II. Specifications ED backlit, Digital Screen TT CD Color Size 7 Inch Connector Digital TT esolution 800(G) 480 No. Camera Inputs 4 Visible Angle (/UD) 140 / 110 Contrast 0:1 Volume (nits) 300 esponse Time (ms) 25 Color System PA/NTSC (AUTO) Support our Camera Inputs 1.0Vp-p75Ω Audio Output W 1W oudspeaker φ 4. 0cm,16Ω/1W Connector DVI24+1 Power Source DC11-32V ree Power Input Consumption MIN 8W, MAX 20W (four cameras ON) External dimensions(mm) 185 X W 124 X T48 (without mounting) Weight 400g 2
Camera III. Installation of DVI24+1 Plug racket Screws Install DVI24+1Plug racket Screws OverView Camera Mounting racket Top Plug in securely and tighten screws IV. Install/emove Sun Visor Installation Mounting racket ase Top Clip-buckle Pus h M on ito S un sh ad r Complete e Mon itor with suns hade ottom Clip-buckle emove Top Clip-buckle Pu ll su ns ha Push de Pu ll mon itor with suns hade pre ss m on ito Pus h o tto m C lip -b uc r pr es s kl e V. Installation of racket Camera Specifications Image pick-up Device 1/3" Sharp Color CCD TV System NTSC/PA (depending upon model) ens Mount 420 TV lines Horizontal esolution Internal Synchronization Sync System NTSC 510(H) x 492(V) PA 0(H) x 562(V) Number of Pixels 0 ux at Night (I ED ON) Usable Illumination CDS Auto Control Under 10 ux by CDS Operation Temp -20 C - +C Power Supply DC 12v +/-10% Weight Weight 4g Environmental Watertight Screw Screw 3 8
emote Control VI. Operation: III. utton unction MUTE Press Mute to turn sound off to resume volume, press Mute again o r p ress V O+ ME NU P OWE or O N/O Vol - U p / a.to select men u option b.to s wi t ch images in t he mode of one camera view in order: Menu Vol+ V O-/+ a. Adj u s t volu m e of monitor. b.a dju s t brigh t ness,contr a st,etc. c. Ac tiv a t e other functions, such as: mirror/normal image switch, delay time adjustment, etc. Menu D isp lay. MODE: User can use t his key t o se l ect fo u r mode s : sta n dard c olor,soft colo r, ric h color and bright. CA Press t his button is to display currently displayed AV channel SEEP Time setup of sleep off, it is used to set the time off within 120 minutes. anguage anguage selection of Chinese or English, Quad View Switch Tur n monito r on pres s Quad Vi e w M ode S w itch key, the quad view will be changed in the order displayed below: Down Up/ Selection ON/Standby Quad View Mode Switch 1. Press ON\Standby to turn monitor ON/O. 2. Quad View Mode Switch: Turn monitor on and press "Quad View Mode Switch key", the quad view will be changed as below one by one: 3. Up / Selection: a. Af t e r pressing the Menu key, pre s s the Up/ Selection to select menu and set up; b. To s w it c h the images in single camera mode in the following order 4. Down: To se l ect menu and set up. 5. Menu M e nu d i spla y. 6. VO-/ + : a. Adjust v olume o f monitor. b. Adj ust b r ightne s s, contrast, etc. c. Acti vat e other functions such as: mirror/normal image switch, delay time adjustment, etc. 7. Me n u Instr u ction Press Menu key do disp l ay a s f ollowing: PICTUE, M I O, TIGDEAY, S YSTEM a. P ICTUE PICTUE IGHTNESS CONTAST SATUATION HUE SEECT Press this button to flip the picture horizontally. Press Up/Down to select brightness, press Vol+/-to set up the value between 0 and 100. Press Up/Down to select CONTAST/SATUATION/HUE. pressvol+/- to set the value. Press this button to flip the picture vertically. 7 4
emote Control I. Introduction b. Normal/Mirror Image displays Camera function as listed below: MIO SEECT NOMA MIO MIO MIO c. TIGDEAY displays camera function as listed below: Volume+ Up \ Selection 7 Call Mode Sleep Quad View Mode Switch Calendar Horizontal lip Vertical lip II. eplace attery Press Up/Down to select / / / press Vol+/-to set up TIGDEAY (0-10 seconds) of / / /. d. anguage SYSTEM ANGUAGE ENGISH SEECT Pull Press Model of attery : (C2025) Press Up/Down to select ang u ag e, pr e ss Vol+/- to select Chinese/English. 5 Menu Down anguage TIG DEAY SEECT ON/Standby Volume- Press Up/Down to select / / / press Vol+/-to set up Normal/Mirror image of / / / Mute 6