DS1 Central Office Twisted Pair Cabling DS1 (1249C SERIES) 26 AWG Polyolefin/PVC Tinned Copper Description 1249C cables are central office cables designed with dual PE/PVC insulated conductors, an inner jacket, a double aluminum foil shield with drain wire and an outer PVC jacket. Applications 1249C cables are used in DS-1 transmission applications in central offices. Construction Details 26 AWG solid tinned copper. Dual-polyethylene with flame retardant polyvinyl chloride (PVC) skin. Twisted Pairs are twisted into pairs meeting cross talk requirements of this specification. Standard even count telephony color code is used. Core Pairs are stranded to form a core. Rip Cord Non-wicking polyester. Inner Jacket FRPVC Light olive gray. Nom 20 mils thick. Inner Shield, Drain Wire, Outer Shield Longitudinally applied alum/polyester tape-alum side out. 24 AWG solid tinned copper. Longitudinally applied alum/polyester tape-alum side out. (length) FEET NORDX/CDT 1249C 25PR/26 AWG CSA CMR CMR (UL) (date) Cable Diameter PAIR UNIT -UP DIAMETER 4 pr 1-4 0.29 6 pr 1-6 0.31 12 pr 1-12 0.38 16 pr 1-16 0.43 20 pr 1-20 0.45 25 pr 1-25 0.48 28 pr 1-25 + 1-3 0.51 30 pr 1-25 + 1-5 0.52 32 pr 1-25 + 1-7 0.53 50 pr 2* (1-25) 0.63 Qualifications Meets CSA C22.2 No.214 CMR-UL444 Type CMR Attenuation Max. Avg. 2.1 db/km (6.4 db/1000 ft.) @ 772 khz Crosstalk Minimum Power Sum near end (NEXT) referenced to 52 db @ 772 khz Characteristic Impedance Frequency (MHz) 0.772 Nominal (ohms) 100 Slitting Cord PVC Inner Jacket 24 AWG Tinned Copper Drain Wire Dual Foil Shield Jacket FRPVC Light olive gray. Nom 26 mils thick. Gray PVC Outer Jacket 4
DS1 (1249C SERIES) DS1 CENTRAL OFFICE TWISTED PAIR CABLING Parameters & Units 26 AWG Conductor DC Resistance at 20 C (68 F) Maximum Individual ohms/kft 47 Resistance Unbalance at 20 C (68 F) Maximum Cable Average 1.5% Maximum Individual Pair 5.0% Mutual Capacitance at 1,000 Hz (Average nf/mile) 83 ±5 Capacitance Unbalance Pair to Pair at 1,000 Hz Maximum RMS pf/kft 25 Maximum Individual pf/kft 143 Capacitance Unbalance Pair to Ground at 1,000 Hz Maximum Average pf/kft 200 Maximum Individual pf/kft 1,000 Dielectric Strength Conductor to Conductor kv DC 2.5 Core to Sheath kv DC 2.5 Attenuation Maximum Average at 772 khz (db/kft) 6.5 Characteristic Impedance Average at 772 khz ohms 100 + 10%, -5% Parameters & Units 26 AWG Crosstalk Equal Level Far End (db/kft) Mean Power Sum 0.150 68 0.772 54 1.600 47 3.15042 6.300 36 Worst Pair Power Sum 0.150 62 0.772 48 1.600 42 3.15036 6.300 30 Crosstalk Equal Level Near End (db/kft) Mean Power Sum 0.150 68 0.772 57 1.600 53 3.15048 6.300 44 Worst Pair Power Sum 0.150 63 0.772 52 1.600 48 3.15043 6.300 39 Nominal Nominal Standard Reel Ordering Cable No. of Cable O.D. Product Weight Shipping Size Number Code AWG Pairs (in.) (lbs/kft) Length (ft) (±10%) (in.) 22530104 22530106 22530112 22530116 22530120 22530125 22530128 22530130 22530132 22530150 1249C-04 26 4 0.27 34 10,000 36 1249C-06 26 6 0.28 38 10,000 36 1249C-12 26 12 0.35 57 6,667 36 1249C-16 26 16 0.39 65 6,667 36 1249C-20 26 20 0.43 79 5,000 36 1249C-25 26 25 0.46 85 5,000 36 1249C-28 26 28 0.48 92 5,000 36 1249C-30 26 30 0.51 110 4,000 36 1249C-32 26 32 0.52 112 4,000 36 1249C-5026 50 0.60 170 2,857 36 5
DS1 CENTRAL OFFICE TWISTED PAIR CABLING DS1 (T100 SERIES) Application Shielded Digital Cables (T100 Series) are primarily used for interconnection of DS-1 transmission equipment within the Central Office. Features In accordance with the National Electrical Code (USA) the cables are UL Listed as type CMR. In accordance with CSA Standard C22.2 No. 214M the cables are CSA certified CMG (FT-4). Cables are compatible with the DS-1 standard for a maximum length of 450 ft. (137m) for the T100 Series. Specification / Reference MC-20544 Core Construction Annealed Tinned Copper 24 AWG (0.5mm) Solid polyethylene consisting of dual layer with an outer layer of colored polyvinyl chloride. Pairs Insulated conductors are twisted together to show distinct color combinations. To provide optimum transmission characteristics in the finished cable, twist lengths of different pairs are varied. Cable Core Cables are formed in a unit construction. Sheath T100 Series cable cores are enclosed in a composite sheath consisting of an alum/polyester shield applied longitudinally with an overlap (alum side out) a 24 AWG tinned copper drain wire placed longitudinally and a light olive gray PVC jacket. Packaging T100 Series (Shielded Digital Cables) are shipped on reels consistent to cable size and lengths. (length) FEET NORDX/CDT T100 25/PR/24 AWG CSA CMR CMR (UL) (date) Polyethylene/Polyvinyl Chloride Dual Insulated Tinned Copper Aluminum/Polyester Foil Shield Tinned Copper Drain Wire PVC Jacket 6
DS1 (T100 SERIES) DS1 CENTRAL OFFICE TWISTED PAIR CABLING Parameters & Units 24 AWG Conductor DC Resistance at 20 C (68 F) Maximum Individual ohms/1,000 ft 29.0 Resistance Unbalance at 20 C (68 F) Maximum Cable Average 1.5% Maximum Individual Pair 5.0% Mutual Capacitance at 1,000 Hz (Average nf/mile) 83 ±5 Capacitance Unbalance Pair to Pair at 1,000 Hz Maximum RMS pf/kft 25 Maximum Individual pf/kft 143 Capacitance Unbalance Pair to Ground at 1,000 Hz Maximum Average pf/kft 200 Maximum Individual pf/kft 1,000 Dielectric Strength Conductor to Conductor kv DC 3.0 Core to Sheath kv DC 3.0 Attenuation Maximum Average at 772 khz (db/kft) 6.4 Characteristic Impedance Average at 722 khz ohms 100 + 10%, -5% Parameters & Units 24 AWG Crosstalk Equal Level Far End (db/kft) Mean Power Sum 0.150 56 0.772 49 1.600 42 3.150 37 6.300 31 Worst Pair Power Sum 0.150 57 0.772 43 1.600 37 3.150 31 6.300 25 Crosstalk Equal Level Near End (db/kft) Mean Power Sum 0.150 58 0.772 47 1.600 43 3.150 38 6.300 34 Worst Pair Power Sum 0.150 53 0.772 42 1.600 38 3.150 33 6.300 29 * The average mean and average worst pair of five cables shall meet the above crosstalk values. Nominal Nominal Standard Reel Ordering Cable No. of Cable O.D. Product Weight Shipping Size Number Code AWG Pairs (in.) (lbs/kft) Length (ft) (±10%) (in.) 22501753 22501751 22501754 22501755 22501756 22501757 22501758 22501759 T106 24 6 0.27 37 13,250 36 T108 24 8 0.30 48 6,500 36 T112 24 12 0.32 60 6,500 36 T116 24 16 0.35 75 5,250 36 T120 24 20 0.40 91 5,250 36 T125 24 25 0.44 111 5,250 36 T130 24 30 0.47 130 4,250 36 T132 24 32 0.48 136 4,250 36 7
DS1 CENTRAL OFFICE TWISTED PAIR CABLING DS1 (600C SERIES) Application Shielded Digital Cables (600C Series) are primarily used for interconnection of DS-1 transmission equipment within the Central Office. Features In accordance with the National Electrical Code (USA) the cables are UL Listed as type CMR. In accordance with CSA Standard C22.2 No. 214M the cables are CSA certified CMG (FT-4). Cables are compatible with the DS-1 standard for a maximum length of 650 ft. (200m) for the 600 Series. Specification / Reference MC-20529 Core Construction Solid Annealed Tinned Copper 22 AWG (0.64mm) Solid polyethylene consisting of dual layer with an outer layer of colored polyvinyl chloride. Ink markings in combination with colored insulation. Pairs To provide distinct color combinations insulated conductors are twisted together. Twist lengths of different pairs are varied to provide optimum transmission characteristics in the finished cable. Cable Core Cables are formed in a unit construction. Sheath 600C Series cable cores are enclosed in a composite sheath consisting of an alum/polyester inner shield applied longitudinally with an overlap (alum side out) a 22 AWG tinned copper drain wire placed longitudinally, an alum/polyester outer shield applied longitudinally with an overlap (alum face inwards) and a light olive gray PVC jacket. Packaging 600C Series (Shielded Digital Cables) are shipped on reels consistent to cable size and lengths. (length) FEET NORDX/CDT 600C 25 PR/22 AWG CSA CMR CMR (UL) (date) Polyethylene/Polyvinyl Chloride Dual Insulated Tinned Copper Inner Aluminum/Polyester Foil Shield Tinned Copper Drain Wire Outer Aluminum/Polyester Foil Shield SlittingCord PVC Jacket 8
DS1 (600C SERIES) DS1 CENTRAL OFFICE TWISTED PAIR CABLING Parameters & Units 22 AWG Conductor DC Resistance at 20 C (68 F) Maximum Individual ohms/1,000 ft 18.0 Resistance Unbalance at 20 C (68 F) Maximum CableAverage 1.5% Maximum Individual Pair 5.0% Mutual Capacitance at 1,000 Hz (Average nf/mile) 83 ±7 Capacitance Unbalance Pair to Pair at 1,000 Hz Maximum RMS pf/kft 25 Maximum Individual pf/kft 143 Capacitance Unbalance Pair to Ground at 1,000 Hz Maximum Average pf/kft 200 Maximum Individual pf/kft 1,000 Dielectric Strength Conductor to Conductor kv DC 3.6 Coreto Sheath kv DC 5.0 Characteristic Impedance Average at 772 khz ohms 100 ±10% Nominal Nominal Standard Reel Ordering Cable No. of Cable O.D. Product Weight Shipping Size Number Code AWG Pairs (in.) (lbs/kft) Length (ft) (±10%) (in.) 25501046 25501090 25501047 25501049 22501052 22501050 22501091 606C 22 6 0.35 63 6,500 36 618C 22 8 0.37 83 6,500 36 607C 22 12 0.42 102 4,300 36 608C 22 16 0.52 127 3,250 36 609C 22 25 0.58 172 3,000 36 613C 22 30 0.63 206 2,500 36 615C 22 32 0.65 221 2,500 36 9
Switchboard Cable Central Office Twisted Pair Cabling Switchboard Cable SWITCHBOARD CABLE ( A TYPE) Applications A Type switchboard cable is designed primarily for indoor use in telecommunications equipment in Central Offices and PBX exchanges. Features Available in 22 AWG, 24 AWG and 26 AWG with from 8 to 303 conductors. Cables are UL Listed as Type CMR in accordance with the NEC and AWM Style 2464 under subject 758. Cables are CSA certified CMG (FT-4) in accordance with CSA Standard C22.2 No.214M. Specification / Reference MC-20289 (22 AWG and 24 AWG) MC-20418 (26 AWG) Core Construction Solid Annealed Tinned Copper conductors in 22 AWG (0.64mm), 24 AWG (0.5 mm) and 26 AWG (0.4mm). Semi-rigid PVC colored in combination with single dots, double dots or single dashes of colored ink. Pairs To provide distinct color combinations insulated conductors are twisted together. To provide optimum transmission characteristics in the finished cable, twist lengths of different pairs are varied. Cable Core The cable cores consist of single units or multiunits Single unit cores, containing both pairs and singles, are arranged with the pairs on the outside and the single conductors beneath the pairs. Where called for, spare conductors are placed in the center of the cable. Multiunit cores are comprised of units as described for single unit cores except that any required spare conductors are placed in the center of the cable core assembly. Units in a multiunit core are identified by colored, non-wicking, binders. Jacket The overall jacket is light olive gray, flame retardant (per UL requirements) polyvinyl chloride extruded over a non-wicking slitting cord. Packaging Switchboard cables ( A Type) are shipped on reels consistent with cable sizes and lengths. See MC-20289 or MC-20418 for further details. (length) Ft Nordx/CDT U824-A 25PR 26AWG CSA CMR MPR/CMR (UL) (date) Polyvinyl Chloride Insulated Tinned Copper Nylon Slitting Cord PVC Jacket 10
Switchboard Cable SWITCHBOARD CABLE ( A TYPE) Switchboard Cable Central Office Twisted Pair Cabling Parameters & Units 22 AWG 24 AWG 26 AWG Conductor DC Resistance at 20 C (68 F) Maximum Individual ohms/1,000 ft 18.0 29.0 47.0 Resistance Unbalance at 20 C (68 F) Maximum Cable Average 1.5% 1.5% 1.5% Maximum Individual Pair 4.0% 4.0% 4.0% Capacitance Unbalance Pair to Pair at 1,000 Hz Maximum RMS pf/kft 40 40 40 Maximum Individual pf/kft 160 160 160 Dielectric Strength Conductor to Conductor kv DC 3.5 3.5 2.5 Crosstalk Equal Level Far End (db/kft) Minimum RMS ³ 20 pairs 73 73 73 <20pairs 69 69 69 Nominal Nominal Standard Reel Ordering Cable No. of Cable O.D. Product Weight Shipping Size Number Code AWG Pairs (in.) (lbs/kft) Length (ft) (±10%) (in.) 24130313 24133713 24133913 24136513 24143813 24144113 24144213 24144413 24144414 24118416 74A 22 10 0.37 74 5,000 36 252A 24 6 0.26 37 10,000 36 253A 24 10 0.34 54 10,000 36 266A 24 24 0.45 116 4,000 36 807A 26 17 0.29 51 10,000 36 808A 26 33 0.39 92 6,000 36 809A 26 66 0.50 170 4,000 36 811A 26 8 0.24 28 16,500 36 812A 26 4 0.18 19 19,500 36 824A 26 25 0.37 71 6,700 36 Note: Information regardingother cable constructions coveringfrom 8 to 303 conductors is available on request. 11
Timing Cable Central Office Twisted Pair Cabling Timing Cable TIMING CABLE (1175A) Description 1175A is a single twisted pair shielded cable. The cable is constructed of solid tinned 22 AWG copper conductor, polyethylene insulation, a foil laminate with a drain wire and PVC insulation. Applications The cable is designed to transmit a central clock reference to distributed points and intended for General Inside communication wiring with a 60 deg. rating. The cable meets ANSI T1 pulse template for up to 655 feet. Product Code 1175A Construction 22 AWG solid tinned copper High Density Polyethylene (HDPE). Conductor Diameter 0.073 inches Pair Colors 1 pair Blue/White Pair Shields The pair is shielded with an aluminum/polyester tape Drain Wire 24 AWG tinned copper Jacket PVC Jacket Thickness 0.016 inches +/-.002" Jacket Color Light Olive Gray or Red **** Feet NORDX/CDT 1175A 22AWG CSA CMR CMR(UL) "DATE" Cable Diameter Nominal 0.220 inches Packaging Shipping lengths 1175A Cable is shipped on reels consistent to cable size and lengths. Qualifications Listed with U/L as CMR rated and intended for General Inside communication wiring with a 60 deg. rating Electrical Properties Resistance 18 ohm/1000' (59 ohm/km) maximum Mutual Capacitance 18 pf/ft (59 pf/m) maximum at 1000Hz. Impedance 100 ohm +/- 15 ohm. For 1-20 Mhz. Attenuation Frequency Maximum (Mhz) db/kft (db/100m) 0.772 4.5 (1.45) 1.0 5.0 (1.6) 4.0 8.8 (2.9) 10.0 14 (4.6) 16.0 18.5 (6-1) 20.0 21 (6.6) Ordering Cable Color AWG Pairs Standard Shipping Number Code Length 24731210 1175A Gray 22AWG 1 Pair 3200ft 24731212 1175A Red 22AWG 1 Pair 3200ft 12
Tinned Inside Wire SHIELDED / UNSHIELDED DIGITAL CABLES (TIW) Tinned Inside Wire Central Office Twisted Pair Cabling Description TIW is a Tinned Inside Wire employing PVC insulation and a PVC jacket. Applications TIW is typically used in low frequency transmissions applications in central offices. Product Code TIW Construction 24 AWG solid tinned copper. Flame retardant polyvinyl chloride (PVC). Twisted Pairs are twisted to form pairs such that the electrical requirements of this specification are met. Standard telephony color code with band marks. Core Pairs are stranded to form a core. 4, 12, 16, 25, 32, 50, 100 and 200 pair sizes are available. Jacket Flame retardant polyvinyl chloride (PVC) - Light olive gray. Rip Cord Applied longitudinally under jacket {length} FEET NORDX/CDT TIW 25 PR / 24 AWG CSA CMR MPR/CMR (UL) {DATE} Qualifications Meets CSA C22.2 No.214 CMR - UL444 Type MPR/CMR Resistance 28.6 Ω /1 000 ft (Max) Resistance Unbalance 5% Max Individual; 1.5% Max Average Characteristic Impedance Frequency (MHz) 0.772 Nominal (ohms) 85 Temperature Rating 60 DEG.C. Ordering number Cable Code Pair Count AWG Cable Diameter Shielded 24740223 TSD-25 25 24 0.33 inch 24740232 TSD-32 32 24 0.38 inch 24740300 TSD-100 100 24 0.65 inch Unshielded 24740025 TIW-25 25 24 0.33 inch 24740032 TIW-32 32 24 0.38 inch 24740100 TIW-100 100 24 0.65 inch 13