lumencove XT Specification Sheet Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in, 2, or 4 sections Electro-statically applied polyester powder coat finish Aluminum end caps and silicone gaskets Stainless steel hardware Tempered glass lens combined with extruded acrylic opal diffuser IP66 rated fixture* Viewing angle: 20o Meets G ANSI C6. Vibration standard for bridge applications Corrosion-resistant coating for hostile environments** CERTIFICADO No.054, 055 RETILAP Average Luminance (Cd/m²) Performance : Angle Color mixing: RGB ( channels) 62 delivered lumens and 50 peak candelas (RGB full white, 4ft unit) Lumen maintenance 00,000 hrs [L70 @ 25 C] Lumen measurements comply with LM - 79-0 standard Resolution per foot or per fixture (configured with LumenID V software & DMX/RDM) Operating temperatures: -25 C to 5 C [-F to 22F] Electrical : 0º 45º 90º 45º,09,056 96 55º,06,05,09 65º,,05,6 75º,79,5,4 5º,959,950,55 Line voltage luminaire for 00 to 277V Power and data in cable (#6-5) 6W/ft DMX/RDM enabled Viewing angle: 2 5 ", 26 ", ", 50 " 6 4 6 [59mm, 665mm, 97mm, 27mm] 4 DISTANCE BETWEEN FIXTURES " [mm] KEEP MIN. 7 4 6"* [2mm] FRONT VIEW 6" [406mm] Input Cable (no jumper cable needed) 9 2 6 " [65mm] 4 " [95mm] SIDE VIEW * 2 " [6mm] on ft configuration " 2 [9mm] MINIMUM COVE WIDTH *Acrylic diffuser assembly is not IP66 rated. Weep holes allow for water evacuation. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! /6 Copyright Lumenpulse 206 0/JN/206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 Consult
lumencove XT Specification Sheet MOUNTING OPTIONS Surface Mount " [0mm] UMP Fixed Mounting /4 [9mm] / [0mm] /6 [5mm] /2 [9mm] 2 7/ [7mm] Wall Mount 2X 9/2 THRU ALL UMP Mounting Hole Pattern UMAS Universal Adjustable Mounting 9 /4 [9mm] / [0mm] / [0mm] 6 2 /2 [64mm] WAM2 Adjustable Wall Mounting 2" /4 [45mm] 2X 9/2 THRU ALL -6 UMAS Mounting Hole Pattern WAM6 Adjustable Extended Arm Mounting 6" / [0mm] /6 [27mm] 2 /2 [64mm] - 2X /4 THRU ALL WAM2 Adjustable Extended Arm Mounting 2" /4 [45mm] WAM Mounting Hole Pattern - 0 " 4" 7" 4 [5mm] [0mm] [7mm] 2/6 Copyright Lumenpulse 206 0/JN/206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 " [40mm] Consult
Specification Sheet ACCESSORIES Order separately lumencove XT Control Systems: Control Boxes: LTO2 LCU LID LTN Lumentouch is a wall mount DMX 52 controller keypad. Lumencue is a USB / mini SD DMX 52 controller. LumenID is a diagnostic and addressing DMX 52 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 52 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to specifi cation sheet for details. Leader Cable : LXTLC Leader Cable for Lumencove XT. Please add desired cable length : 0, 25 or 50 [m, 7.6m or 5.2m] standard lengths Sealing endcap is mandatory for any unused connector. () included with every leader cable Jumper Cable : LXTJC Jumper Cable for Lumencove XT. Please add desired cable length : 2 or 4 [0.6m,.2m] standard lengths /6 0/JN/206 Copyright Lumenpulse 206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 Consult
Specification Sheet lumencove XT RESOLUTION DETAILS Fixture resolution can be configured on-site within the LumenID V software. A DMX/RDM enabled is required. Resolution per foot: each foot is addressed independently DMX ADDRESSES:, 2, (color ) 4, 5, 6 (color 2) 7,, 9 (color ) 0,, 2 (color 4), 4, 5 (color 5) 6, 7, (color 6) 9, 20, 2 (color 7) 22, 2, 24 (color ) LXTD RGB 4 inches LXTD RGB 4 inches Resolution per fixture: each fixture is addressed independently DMX ADDRESSES:, 2, (color ) 4, 5, 6 (color 2) LXTD RGB 4 inches LXTD RGB 4 inches 4/6 0/JN/206 Copyright Lumenpulse 206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 Consult
lumencove XT Specification Sheet TYPICAL WIRING DIAGRAMS Star Layout (DMX/RDM) *Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit. American Color Code CE Color Code USE Green Black White Red/Purple Orange Yellow/Green Brown Blue Black Grey Ground Live 00-277V Neutral 0-0V / Data + 0-0V / Data - Sealing end cap Leader cable #6-5 00-277V Data input Maximum run length, A maximum - Lumencove XT RGB 6W/ft Cable length/voltage 20V 240V 277V 0ft leader cable 2ft 2ft 2ft 50ft leader cable 2ft 2ft 2ft Data Lumentouch 2.0 input 00-240V Notes: Maximum run length calculations are typically based on 4ft fixtures and up to 2 DMX/RDM enabled fixtures per DMX/RDM run. 2 Consult factory for specific applications. RGB color mixture option requires DMX addresses. Daisy Chain Layout (DMX/RDM) Lumentouch 2.0 00-240V Sealing end cap Leader cable #6-5 Leader cable #6-5 5/6 Copyright Lumenpulse 206 0/JN/206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 00-277V Data input 00-277V Data input Consult
Specification Sheet HOW TO ORDER lumencove XT LXTD RGB DMX/RDM 2 4 5 6 7 6 Housing: Finish: 2 LXTD - Lumencove XT Direct View Voltage: BK - Black Sandtex SI - Silver Sandtex WH - Smooth white CC - Custom color and finish (please specify RAL color) 2 00-00 volts 20-20 volts 20-20 volts 220-220 volts 240-240 volts 277-277 volts 7 Control: DMX/RDM - DMX/RDM enabled Length: 2-4 / inches (59mm) (.7 kg/.7 lbs) 24-26 /6 inches (665mm) (2.55 kg/5.6 lbs) 6 - /4 inches (97mm) (4 kg/. lbs) 4-50 5/6 inches (27mm) (4.9 kg/0. lbs) Option: CRC - Corrosion-resistant coating for hostile environments GV - G ANSI C6. Vibration Rating 4 4 Colors and Color temperatures: RGB - Additive red, green and blue, 6W/ft 5 Mounting Option: UMP - Fixed Mounting UMAS - Universal Adjustable Mounting WAM2 - Adjustable Wall Mounting 2 WAM6 - Adjustable Extended Arm Mounting 6 WAM2 - Adjustable Extended Arm Mounting 2 Notes: Suitable to use when GV option is specified. 2 North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. Fixtures set to by fixture resolution (consult the Resolution Details page for the number of DMX addresses). 4 Available with UMP and UMAS mounting options only. 6/6 0/JN/206 Copyright Lumenpulse 206 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.629 Consult