superi connectivity solutions rtec
superi rtec
TABLE OF CONTENT CATEGORY6 PRODUCTS AND SOLUTIONS UTP 4-pair Cables 19 Rack Mount Patch Panels RJ45 Keystone Jacks RJ45-RJ45 Patch Cords Work Area Keystone Faceplates & Adapters CATEGORY3 PRODUCTS AND SOLUTIONS Multi-pair UTP Cables 50-port RJ45 Patch Panel FIBER OPTIC PRODUCTS & SOLUTIONS Indoor Cables Tight Buffered, with Aramid Yarn and LSZH Sheath Zip cord Indoor/Outdoor Cables Tight Buffered, with Glass Yarn and LSZH Sheath Central Tube, with Glass Yarn and LSZH Sheath Multitube, with Glass yarn and LSZH Sheath Outdoor Cables Central Tube, with Glass Yarn and PE Sheath Central Tube, Corrugated Steel Armored with Glass Yarn and PE Sheath Multitube, with Glass yarn and PE Sheath Multitube, Corrugated Steel Armored with Glass yarn and PE Sheath Special Cables 19 Rack-Mount Fiber Panels AP4U APW3 Lockable Wall Box with 4LGX Slots Fiber Patch Cords Series Fiber Pigtails Series Fiber Connectors Series Fiber Adapters Series POWER DISTRIBUTION UNITS Standard Horizontal and Vertical PDUs Intelligent PDUs CABLE MANAGERS SERIES 19 Cable managers P 5 P 6 P 8 P 10 P 11 P 12 P 13 P 14 P 16 P 17 P 18 P 20 P 23 P 28 P 29 P 31 P 32 P 33 P 34 P 35 P 36 P 37 P 38 P 39 P 41 P 42 TOOLS AND ACCESSORIES P 43 Accessories P 44 Velcro tape Splicing heat-shrink sleeves Tools P 45 110 punch down tool Modular crimp Tool Cable jacket stripper Fiber termination kit WARRANTY PROGRAM P 46
superi rtec
CATEGORY6 PRODUCTS AND SOLUTIONS Cable Managers Series Tools & Accessories UTP 4-Pair Cables 19 Rack Mount Patch Panels RJ45 Keystone Jacks RJ45-RJ45 Patch Cords Work Area Keystone Faceplates & Adapters P 6 P 8 P 10 P 11 P 12 Category 6 Products & Fiber Optic Products & Category 3 Products & Power Distribution Units 5
UTP 4-pair Cables Superiortec Category 6 unshielded twisted-pair cable is designed for applications demanding high-bandwidth and reliable transmission. Engineered with state-of-the-art design, this cable is the perfect transmission media for Voice, Video and High speed data transmission. It features a separator among the twisted pairs to lower the cross talk at each point along the full length of the cable. It comes with two options for the outer jacket: PVC or Low Smoke Zero Halogen (LSZH). APPLICATION Access network Fast Ethernet 100BASE-TX Gigabit Ethernet 1000BASE-T Broadband video Voice All applications developed for operation over CAT6 or class E cabling FEATURES Low Attenuation & Crosstalk Flexible for installation in conduits, on cable trays, and under raised floor Easy to Terminate Color Coded Pair Identification SPECIFICATIONS Number of pairs: 4 Conductor size: 23 AWG Conductor material: bare Copper Conductor construction: solid Outer Jacket: PVC or LSZH Standards: TIA/EIA - 568 6
TRANSMISSION PERFORMANCE Frequency MHz Insertion Loss NEXT Pair- to- Pair NEXT power sum ELFEXT pair -to-pair ELFEXTpower sum ACR pair-to-pair ACR power sum Return Loss Solid per 100m 1 2.0 74.3 72.3 67.8 64.8 72.3 70.3 20.0 4 3.8 65.3 63.3 55.8 52.8 61.5 59.5 23.0 8 5.3 60.8 58.8 49.7 46.7 55.5 53.5 24.5 10 6.0 59.3 57.3 47.8 44.8 53.3 51.3 25.0 16 7.6 56.2 54.2 43.7 40.7 48.6 46.6 25.0 20 8.5 54.8 52.8 41.8 38.8 46.3 44.3 25.0 25 9.5 53.3 51.3 39.8 36.8 43.8 41.8 24.3 31.25 10.7 51.9 49.9 37.9 34.9 41.2 39.2 23.6 62.5 15.4 47.4 45.4 31.9 28.9 32.0 30.0 21.5 100 19.8 44.3 42.3 27.8 24.8 24.5 22.5 20.1 200 29.0 39.8 37.8 21.8 18.8 10.8 8.8 18.0 250 32.8 38.3 36.3 19.8 16.8 5.5 3.5 17.3 ORDERING INFORMATION CL004C60U/UTP-CM: CL004C60U/UTP-LS: UTP CAT 6 4PR PVC CABLE UTP CAT 6 4PR LSZH CABLE Category 6 Products & 7
19 Rack Mount Patch Panels IDC Type Superiortec s Category 6 patch panels are designed to exceed industry expectations and surpass the governing standards. Developed to offer guaranteed bandwidth and true performance, Superiortec s Cat 6 patch panels are assured to meet the standard when verified. APPLICATIONS Access network Fast Ethernet 100BASE-TX Gigabit Ethernet 1000BASE-T Broadband video Voice All applications developed for operation over CAT6 or class E cabling SPECIFICATIONS STANDARDS CAT6-component compliant Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements. Backward compatible Meet TIA/EIA TSB-40 T568A/B wiring colors for easy installation Meet ISO/IEC Generic Cabling Standard 11801 Angle: 90 Degree Meet CENELEC Generic Cabling Standard EN50173 Termination: 110 IDC PHYSICAL CHARACTERISTICS Housing: PC UL94V-0 IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire. PCB: FR4 1.6mm(0.04 ) thickness, 2 layers Contact: PC UL94V-0, 0.45mm(0.018 ) Diameter Phosphor bronze with 3 u Gold plating on contact area ORDERING INFORMATION PP24C6R PP48C6R Patch panel 24-RJ45, Cat6 Unshielded, 568A/B wiring, 1U w/strain-relief bar Patch panel 48-RJ45, Cat6 Unshielded, 568A/B wiring, 2U w/strain-relief bar 8
19 Rack Mount Patch Panels Modular Type Superiortec snap-in type UTP patch panel is designed for your customized cabling solution. Based on your requirements, you can select your preferred keystone connectors and snap them into the panel as required. FEATURES Snap-in type accepts keystone jacks Plastic front panel (UL94V-0 plastic) Window style label with port numbers 1U and 2U patch panel available Integrated plastic cable management ORDERING INFORMATION MP24KJR Modular Panel (Empty), 24-Port KMJ, 1U w/strain-relief bar Category 6 Products & 9
RJ45 Keystone Jacks Category 6 keystone jack is designed for Gigabit Transmission Requirements. Together with high quality performance, the high-density design of this jack provides more flexibility for field installations. When it comes to performance, the Cat6 jack meets and exceeds the requirements of the Attenuation, Return Loss and FEXT specified in TIA/EIA-568-B.2-1 CAT6. The Near End Cross-Talk (NEXT) meets the TIA/EIA-568-B.2-1 CAT6 channel with Graybar VIP2000 limit requirements, and also meets the CAT6 15M short link requirements. FIELD APPLICATIONS Wall plate Surface mount box Modular type (snap-in) patch panel SPECIFICATIONS CAT6 component compliant Backward compatible T568A/B wiring colors for easy installation Suitable for high-density solutions Easy-to-terminate design Low attenuation and cross talk High reliability and superior performance Termination: 110 IDC PHYSICAL CHARACTERISTICS Housing: high temperature thermoplastic Compact jack design, 8 positions and 8 conductors Contact: phosphor bronze, with 6 u gold plate Accept 22-26 AWG solid with insulation diameter of 0.4-0.6 mm ORDERING INFORMATION KJUC607 KJUC602 RJ45 Cat6 Jack, Keystone Unshielded, 568A/B wiring, White RJ45 Cat6 Jack, Keystone Unshielded, 568A/B wiring, Black 10
RJ45-RJ45 Patch Cords Superiortec s patch cords complement Superiortec copper system with the guaranteed performance that exceeds the standard requirements. Introducing the slim boot design making it very convenient for high-density installations requiring small footprint of the patch cord. Superiortec s patch cords offer strain relief solution that ensures mechanical and electrical stability during and after adds, moves or changes. Superiortec s patch cords utilize straight-thru pair orientation and are 100% component performance tested. APPLICATIONS Access network Fast Ethernet 100BASE-TX Gigabit Ethernet 1000BASE-T Broadband video Voice All applications developed for operation over CAT6 or class E cabling FEATURES Exceeds Category 6 requirements 100% component performance tested Fitted with strain relief boots Low attenuation and cross talk RJ45 plug tab to prevent snagging Uses superior quality cable Molded type ORDERING INFORMATION PCUC6-1M06 Patch Cord, Molded type, Unshielded Cat6, 1 Meter, Grey PCUC6-2M06 Patch Cord, Molded type, Unshielded Cat6, 2 Meter, Grey PCUC6-3M06 Patch Cord, Molded type, Unshielded Cat6, 3 Meter, Grey * Add L at the end of the P/N for LSZH Category 6 Products & 11
Work Area Keystone Faceplates & Adapters FACEPLATES With sleek design and quality material, Superiortec s faceplates are the premium connectivity accessories of choice: The labeling space provides practicality for points referencing, while the screw-less finish provides elegant appearance. These faceplates are available in one port or two ports configurations. KEYSTONE ADAPTERS Whether it is a high-density office with shared working space or fancy house with decorated wall plates, the keystone adapters provide the required flexibility for such application. Superiortec s adapters come in the standard 6C size and the extended 6CE size, which make them suitable for almost all commercial floorboxes and ring-type wall plates. The adapters can also be either flat or angled for more connecting options. The labeling area provides enough space to print point references. ORDERING INFORMATION FPSH1UK FPSH2UK 6C-ADAPT 6C-ADAPT-A 6C BLANK 6CE-ADAPT 6CE BLANK 6CF - ADAPT 6CF - BLANK UK shuttered faceplate, 1 port UK shuttered faceplate, 2 ports 6C adapter (25x38mm) 6C adapter angled 6C blank 6CE adapter (25x50mm) 6CE blank French adapter (22.5x45mm) French blank 12
CATEGORY3 PRODUCTS AND SOLUTIONS Cable Managers Series Tools & Accessories Multi-pair UTP Cables 50-port RJ45 Patch Panel P 14 P 16 Category 6 Products & Fiber Optic Products & Category 3 Products & Power Distribution Units 13
Multi-pair UTP Cables Indoor Superiortec Category 3 multipair cable is a general purpose, high-performance cable used for indoor voice applications. It is designed for low noise and attenuation. The Color coded pairs facilitate easy channel identification, and the flexible jacket makes is easy to pull through conduit. APPLICATIONS Indoor backbone Fixed installations High bandwidth digital applications with low BER Broadband transmission in the common mode FEATURES Low Attenuation & Crosstalk Flexible Easy to Terminate Color Coded Pair Identification SPECIFICATIONS Number of pairs: 2,5,10,20,25,50,100 Conductor size: 24 AWG Conductor material: bare Copper Conductor construction: solid Color code: multipair data cables Outer Jacket: PVC or LSZH Standards: TIA/EIA - 568 TRANSMISSION PERFORMANCE Frequency (MHz) Attenuation (db / 100m) NEXT (db) 1 2.6 41 4 5.6 32 8 8.5 27 10 9.7 26 16 13.1 23 14
Multi-pair UTP Cables Outdoor Superiortec Category 3 outdoor multipair cable is a durable, high-performance cable used for tough outdoor voice applications. It is designed for long lasting life and excellent functioning. These cables are filled with water-resistant jelly compound to block the longitudinal flow of water inside cables. APPLICATIONS Outdoor backbone Fixed installations High bandwidth digital applications with low BER Broadband transmission in the common mode FEATURES SPECIFICATIONS Low Attenuation & Crosstalk Number of pairs: 2,5,10,20,25,50,100 Jelly-filled Conductor size: 24 AWG Durable Conductor material: bare Copper Color Coded Pair Identification Conductor construction: solid Color code: multipair data cables Outer Jacket: PE Standards: TIA/EIA - 568 TRANSMISSION PERFORMANCE Frequency (MHz) Attenuation (db / 100m) NEXT (db) 1 2.6 41 4 5.6 32 8 8.5 27 10 9.7 26 16 13.1 23 ORDERING INFORMATION Z-CL xxx C30 U/UTP yy Category 3 Products & I-indoor A-outdoor Number of pairs: 2,5,10,20,25,50,100 Jacket type: LS: LSZH CM: PVC PE: Polyethylene 15
50-port RJ45 Patch Panel Superiortec s High density Category 3 patch panel is designed for voice grade applications. This patch panel provides 50 RJ45 ports (25x2) within 1 rack unit (RU) only, which offers an effective way to terminate a multi-pair cable and provide RJ45 ports interface. With the clear numbering scheme, it enables easy and quick identification of the outlets. STANDARD COMPLIANCE ISO/IEC11801: 2000 ANSI/TIA/EIA-568-A FEATURES AND BENEFITS High density, economical, 1RU design Standard 19 mounting Gloss black metal finishing Suitable for voice applications MECHANICAL SPECIFICATIONS Jack insertion durability: 750 mating cycles IDC block durability: 200 termination cycles PHYSICAL SPECIFICATIONS Jack housing and IDC block: Polyphenylene oxide, UL94V-O RJ45, 8-position connector: Meets FCC part 68 and IEC 603-7 IDC wire range: Solid or stranded, 22-26 AWG, 0.64mm2 0.4mm2 ORDERING INFORMATION PP50C3R 50 Port Voice Tray Patch Panel, 1U (25*2) 16
Fiber Optic Products & Fiber Optic Products & Cable Managers Series Tools & Accessories Power Distribution Units Indoor Cables Indoor/Outdoor Cables P 18 P 20 Outdoor Cables P 23 Special Cables P 28 19 Rack-Mount Fiber Panels P 29 AP4U P 31 APW3 Lockable Wall Box with 4LGX Slots P 32 Fiber Patch Cords Series P 33 Fiber Pigtails Series P 34 Fiber Connectors Series P 35 Fiber Adapters Series P 36 Category 3 Products & Category 6 Products & 17
Indoor Cables Tight Buffered, with Aramid Yarn and LSZH Jacket APPLICATION Superiortec s indoor cables are ideal for backbone and horizontal sub systems installations such as FTTH and FTTD, due to their high flexibility and small dimensions. The outer jacket is made of LSZH material that makes the cable suitable for indoor installations. The fibers are tight-buffered for direct connector assembly. STANDARDS COMPLIANCE Flame retardancy IEC 60332-3 Smoke density IEC 61034 Halogen-free IEC 60754-2, DIN VDE0472 part 813 (FRNC) Generic cable specifications EN 187000: IEC 60794-1&2, EN 188000:IEC 60793-1&2 CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Tight-buffered fiber (TB) 900um non-metallic (aramid) halogen-free and flame-retardant material orange for multi-mode, yellow for singlemode CABLE CHARACTERISTICS Number of fibers (n) 2 to 12 Approx. Outer diameter of cables 4.0 mm-7.5 mm Approx Weight 24 kg/km-45 kg/km Minimum bending radius 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) 800N Max. Crush resistance (Long term) 300 N/dm Operating temperature -30 C to +70 C Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 18
Indoor Cables Zip cord APPLICATION Superiortec s zipcords are ideal to be used as patch cables in distribution systems as well as for connecting terminals. The outer jacket is made of LSZH material. Highly flexible and having small diameters make them the perfect solution to make the desired patch cords. STANDARDS COMPLIANCE Flame retardancy IEC 60332-3 Smoke density IEC 61034 Halogen-free IEC 60754-2, DIN VDE0472 part 813 (FRNC) Generic cable specifications EN 187000: IEC 60794-1&2, EN 188000:IEC 60793-1&2 CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Tight buffered fiber (TB) 900um non-metallic (aramid) halogen-free and flame-retardant material orange for multi-mode, yellow for singlemode Fiber Optic Products & Other colors are available upon request CABLE CHARACTERISTICS Number of fibers (n) 2 Approx. Outer diameter of cables Depends on the jacket Approx Weight 5.8 kg/km-17.5 kg/km Minimum bending radius over flat side 30mm (Static), 60mm (Dynamic) Max. Tensile strength (Long term) 400N Max. Crush resistance (Long term) 200 N/dm Operating temperature -30 C to +70 C Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 19
Indoor/Outdoor Cables Tight Buffered, with Glass Yarn and LSZH Sheath APPLICATION Superiortec s Indoor/Outdoor fiber cables are non-metallic, flexible and light, that can be used both inside (LSZH jacket) and outside buildings (enhanced tensile load). Suitable for installations in cable ducts, on cable trays or in cable conduits. STANDARDS COMPLIANCE Flame retardancy IEC 60332-3 Smoke density IEC 61034 Halogen-free IEC 60754-2, DIN VDE0472 part 813 (FRNC) Generic cable specifications EN 187000: IEC 60794-1&2, EN 188000:IEC 60793-1&2 CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Tight buffered fiber (TB) 900um non-metallic and water blocking Glass Yarn halogen-free and flame-retardant material Blue Tight buffered optical fibers strenght cabel(glass yarns) LSZH Sheath CABLE CHARACTERISTICS Number of fibers (n) Up to 12 Outer diameter of cables Max.5.5mm Cable Weight Max.29 kg/km Minimum bending radius 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) 1100N Max. Crush resistance (Long term) 800 N/dm Operating temperature -30 C to +70 C Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 20
Indoor/Outdoor Cables Central Tube, with Glass Yarn and LSZH Sheath APPLICATION Superiortec s Indoor/Outdoor fiber cables are non-metallic, light and flexible that can be used both inside (LSZH jacket) and outside (Enhanced tensile load) buildings. Suitable for installations in cable ducts, on cable trays or in cable conduits. FIRE PERFORMANCE Flame retardancy IEC 60332-1 no toxic and corrosive fumes CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Central tube Jelly filled non-metallic and water blocking Glass Yarn halogen-free and flame-retardant material Blue Jelly Optical fibers Loose tube Glass yarn Fiber Optic Products & LSZH Outer Sheath CABLE CHARACTERISTICS Number of fibers/tube Up to 12 Outer diameter Approx.7.5mm Minimum bending radius (Dynamic) 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) 1000N Operating temperature -30 C to +70 C Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 21
Indoor/Outdoor Cables Multitube, with Glass yarn and LSZH Sheath APPLICATION Superiortec s Indoor/Outdoor fiber cables are non-metallic and can be used both inside (LSZH jacket) and outside buildings (enhanced tensile load). Suitable for installations in cable ducts, on cable trays or in cable conduits. FIRE PERFORMANCE Flame retardancy IEC 60332-1 no toxic and corrosive fumes CONSTRUCTION Cable core Armouring Cable jacket Color of jacket Central strength member with stranding gel filled loose tubes and if necessary fillers Strengthened water-blocking E-glass yarn,features non-metallic strain relief elements and rodent protection halogen-free and flame-retardant material Blue Optical fibers Loose tube jelly filled Central strength member E-Glass yarn LSZH Outer Sheath Filler rod CABLE CHARACTERISTICS Number of fibers/tube 12 Number of tubes+fillers 12 Outer diameter range 12-16.5mm Minimum bending radius (Dynamic) 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) Operating temperature 1500N -40 C to +70 C Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 22
Outdoor Cables Central Tube, with Glass Yarn and PE Sheath APPLICATION Superiortec s Outdoor fiber cables are light in weight, flexible and non-metallic for the backbone. Suitable for installations in cable ducts or on cable trays. FIRE PERFORMANCE Jacket is halogen-free No toxic and corrosive fumes CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Central tube Jelly filled non-metallic and water blocking Glass Yarn PE Black Fiber Optic Products & CABLE CHARACTERISTICS Number of fibers/tube Up to 12 Outer diameter Approx.8mm Minimum bending radius (Dynamic) 20 x D [where D, Max. Tensile strength (Long term) Operating temperature 1000N -30 C to +70 C Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 23
Outdoor Cables Central Tube, Corrugated Steel Armored with Glass Yarn and PE Sheath APPLICATION Superiortec s Outdoor steel armored fiber cables are robust to withstand the tough site conditions for the backbone areas. Suitable for installations in cable ducts, on cable trays or direct buried. FIRE PERFORMANCE Jacket is halogen-free No toxic and corrosive fumes CONSTRUCTION Cable core Armouring Cable jacket Central tube Jelly filled water blocking and strain relief Glass Yarn, and corrugated steel tape as rodent protection PE Color of jacket Black CABLE CHARACTERISTICS Number of fibers/tube Up to 12 Outer diameter Approx.8.5mm Minimum bending radius 20 x D [where D, overall diameter of Max. Tensile strength (Long term) 1000N Operating temperature -30 C to +70 C Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 24
Outdoor Cables Multitube, with Glass yarn and PE Sheath APPLICATION Superiortec s non-metallic Outdoor fiber cables are robust for primary cabling and backbone areas. Suitable for installations in cable ducts or on cable trays. FIRE PERFORMANCE Jacket is halogen-free No toxic and corrosive fumes CONSTRUCTION Cable core Strain relief elements Cable jacket Color of jacket Central strength member with stranding gel filled loose tubes and if necessary fillers. Cable core filled with water-blocking gel non-metallic Yarn PE Black Optical fibers Loose tube jelly filled Central strength member Core filling Wrapping tape Yarn PE outer sheath Filler rod Fiber Optic Products & CABLE CHARACTERISTICS Number of fibers/tube 12 Number of tubes+fillers 12 Outer diameter range 12-16.5mm Minimum bending radius (Dynamic) 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) 1500N Operating temperature -40 C to +70 C Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 25
Outdoor Cables Multitube, Corrugated Steel Armored with Glass yarn and PE Sheath APPLICATION Superiortec s steel armored Outdoor fiber cables are robust for primary cabling and the backbone. Suitable for installations in cable ducts, on cable trays or directly buried. FIRE PERFORMANCE Jacket is halogen-free No toxic and corrosive fumes CONSTRUCTION Cable core Armoring Cable jacket Central strength member with stranding gel filled loose tubes and if necessary fillers. Cable core filled with water-blocking gel strain relief Glass Yarn, and corrugated steel tape as rodent protection PE Color of jacket Black Optical fibers Loose tube jelly filled Central strength member Core wrapping Filling compound Steel tape PE outer sheath CABLE CHARACTERISTICS Number of fibers/tube 12 Number of tubes+fillers 12 Outer diameter range 12-16.5mm Minimum bending radius (Dynamic) 20 x D [where D, overall diameter of cable] Max. Tensile strength (Long term) 1500N Operating temperature -40 C to +70 C Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia 26
Order Number Coding CABLE TYPE CABLE CONSTRUCTION CORE TYPE N X M FIBER TYPE CABLE TYPE I = INDOOR A = OUTDOOR U = UNIVERSAL CORE TYPE UT = UNITUBE TB = TIGHT BUFFERED MT = MULTI TUBE N x M N = # OF TUBES; NOTE: N=01 INCASE OF UT & TB M = # OF FIBER FIBER TYPE A = G.652B B = G.652D C = G.657A D = OM1 E = OM2 F = OM3 OUTDOOR 01 = UNITUBE, DIELECTRIC, E-GLASS, PE 02 = UNITUBE, CORRUGATED STEEL, E-GLASS, SINGLE PE 03 = UNITUBE, CORRUGATED STEEL, E-GLASS, DOUBLE PE 04 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, SINGLE PE 05 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, DOUBLE PE 06 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, SINGLE PE 07 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, DOUBLE PE 08 = MULTITUBE, DIELECTRIC, E-GLASS, JELLY-FILLED, SINGLE PE 98 = MULTITUBE, DIELECTRIC, JELLY-FILLED, SINGLE PE, ARAMID YARN 09 = MULTITUBE, DIELECTRIC, E-GLASS, JELLY-FILLED, DOUBLE PE 10 = MULTITUBE, CORRUGATED STEEL, E-GLASS, JELLY-FILLED, SINGLE PE 11 = MULTITUBE, CORRUGATED STEEL, E-GLASS, JELLY-FILLED, DOUBLE PE INDOOR/OUTDOOR 12 = UNITUBE, DIELECTRIC, E-GLASS, LSZH 13 = UNITUBE, CORRUGATED STEEL, E-GLASS, SINGLE LSZH 14 = UNITUBE, CORRUGATED STEEL, E-GLASS, DOUBLE LSZH 15 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, SINGLE LSZH 16 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, DOUBLE LSZH 17 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, SINGLE LSZH 18 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, DOUBLE LSZH 19 = TIGHT BUFFERED, LSZH, INDOOR 20 = TIGHT BUFFERED (BREAKOUT), ARAMID YARN, LSZH SPECIAL TYPES 30 = SWA, TIGHT BUFFERED 31 = SWA, LOOSE TUBE 40 = ADSS Fiber Optic Products & 27
Special Cables Fiber strength memebers Indoor Drop Cable (Flat) for FTTH Application Fibers LSZH sheath CHARACTERISTICS AND APPLICATIONS Suitable for short distances in buildings Small size and bending radius Easy to install and terminate Flame retardant LSZH outer sheath Two parallel non-metallic strength members, fiber reinforced plastic (FRP) In compliance with EU ROHS TENSILE STRENGTH CRUSH RESISTENCE MIN. BEND RADIUS Short term 70N Short term 1000N Dynamic 30mm Long term 30N Long term 300N Static 15mm ENVIRONMENTAL PROPERTIES PHYSICAL PROPERTIES FIBER COUNT TYPE Installation Temperature -5 C ~ +40 C Dimensions 3.1mmx2.0mm 2-core SM G.657A Operation Temperature -20 C ~ +70 C Cable weight 9.8 Kg/Km (refer to specs below) ORDERING INFORMATION GJFZY-2 2-F Drop Cable SM, LSZH, Beige Color Beige SM G.657A FIBER-TRANSMISSION PROPERTIES Attenuation Coefficient 1310nm 0.35 db/km 1550nm 0.21 db/km Fiber PMD 0.20 ps/(km)1/2 Fiber PMD Link Value PMDQ, (m=20, Q=0.01%) 0.1 ps/(km)1/2 1625nm 0.24 db/km Zero Dispersion Wavelength 1300~1324 nm 1383nm 0.32 db/km 1285-1330nm Max Attenuation Minus 1310nm Attenuation 0.04 db/km 1525-1575nm Max Attenuation Minus 1550nm Attenuation 0.04 db/km Attenuation Discontinuity@1310nm 1550nm 0.03 db Attenuation Uniformity@1310nm 1550nm 0.05 db/km Bidirectional Attenuation@1310nm 1550nm 0.04 db/km Macrobending@1550nm (10 turns,φ30mm) 0.20 db Macrobending@1625nm (10 turns,φ30mm ) 0.8 db Macrobending@1550nm (1 turn,φ20mm) 0.75 db Macrobending@1625nm (1 turn,φ20mm ) 1.5 db Mode Field Diameter Zero Dispersion Slope 0.091 ps/(nm2.km) Geometrical Properties Cladding Diameter 125±0.7 μm Core/Cladding Concentricity Error 0.5 μm Cladding Non-Circularity 1 % Coating Diameter 245±5 μm Coating Non-Circularity 3 % Coating/Cladding Concentricity Error 12 μm Fiber Curl 4 m Bend radius 15 mm Mechanical Properties 1310nm (8.4~8.8 ±0.4 μm Fiber Proof test Level 1.02 % 1550 nm 10.4±0.8 μm Cut-off Wavelength Fiber Cut-off Wavelength 1150~1330 μm Cable Cut-off Wavelength 1260 μm Fiber Strip Force Peak Value 1.3 8.9 N Fiber Strength Fiber Weibull 50% Strength 4000 Mpa Fiber Weibull 15% Strength 3050 Mpa Chromatic Dispersion Dynamic Fatigue Parameter (Nd 20 Dispersion @1288nm-1339nm Dispersion @ 1271nm -1360nm -3.5~3.5 ps/(nm.km) -5.3~5.3 ps/(nm.km) Environmental Properties Temperature Cycling (-60 ~-85 ),Induced Attenuation (1310nm and 1550nm) 0.05 db/km Dispersion@1550nm 17.5 ps/(nm.km) Water Soak (30 days @23 ),Induced Attenuation (1310nm and 1550nm) 0.05 db/km Dispersion@1625nm 22 ps/(nm.km) Accelerated Ageing(30 days@85,85%rh),induced Attenuation (1310nm and 1550nm) 0.05 db/km 28
19 Rack-Mount Fiber Panels Removable Front Panels Chassis The Superiortec removable front panels chassis is a 19 inch 1U sliding panel in two parts: one sliding tray and one front panel, which accommodates the optical adaptors. The flexibility of the two piece construction allows you to maintain a stock of the chassis and then attach a suitable front panel as required. TECHNICAL SPECIFICATIONS Element Characteristic U Size 1U (44.4mm) Width 482mm Depth 204mm Net weight 2.1kgs Packaged weight 3kgs Packaged Dimensions 450mm x 55mm x 260mm IP Rating IP20 Suitable for adaptor type All Mounting adjustment range 50mm Cable entry 20mm 2 Cable entry 25mm 2 Material Cold Rolled Steel Meterial thickness 1.2mm Material coating Electro Static Powder Coating Colour Black RAL 9004 Grey RAL 7035 Operating Temprature -40 c to + 50 c Compliant to RoHS, Reach / SVHC Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN 50173, IEC 60304, IEC 61754, EN 297-1 Fiber Optic Products & FEATURES AND BENEFITS REMOVABLE FRONT PLATES FEATURES Recessed panel option Up to 48 fibres in 1U No exposed screws Multiple Adaptor options available Screen printed for easy labelling individually labeled ports 45 working angle Rear cable entry options Panel numbers and rack number identification labels High quality finish, no sharp edges ORDERING INFORMATION FT01R Fiber tray 1U, sliding, can accommodate removable front panels RP24SCL Removable front panel, loaded with 24 simplex SC adapters RP24DLCL Removable front panel, loaded with 24 Duplex LC adapters 29
19 Rack-Mount Fiber Panels Sliding Patch Panel Superiortec offers an innovative, robust 1U sliding patch panel. This panel has been designed to accept up to 48 fibres housed within a 1U space. These panels include an internal mounting plate to install the Adaptors giving a reduction in the bend radius of the exiting patch cords, and also a more astatically pleasing installation. With the ability to use a full array of Adaptor types offering a flexible solution to the end user, enabling them to incorporate a multi functional panel which allow easy access during installation or re-work with no disturbance of the existing cable or fibres.in the addition to the array of adaptors, the panel also offers multiple cable entry solutions, up to 4 standard cable entry points for, loose tube, tight buffer, preterminated and steel tape armoured cable.each panels has integrated strength member tie positions also with the additional removable plate at the rear of the panel allows the installation of steel tape armoured cable. TECHNICAL SPECIFICATIONS Elements Characteristics U Size 1U (44.4mm) Width 482mm Depth 205mm Net weight 2.5 kgs Packaged weight 3 kgs Packaged dimensions 450mm W X 55mm H x 260mm D IP rating IP20 Suitable for Adaptor type SC Simplex/LC Duplex Number of ports 24 Cable Entry 20mm 2 Cable entry 25mm 2 Mounting Adjustment range 50mm Material Cold- rolled steel Material thickness 1.2mm Material coating Powder coating Colour RAL 9004 Operating temperature -40 c to +50 c Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,EN297-1 Compliant to RoHS, Reach/SVHC FEATURES AND BENEFITS Up to 48 fibres in 1U Sliding for easy access to fibers Multiple Adaptor options available 24 Adaptor positions Recessed Adaptor positioning ORDERING INFORMATION FP24SCUR Sliding Fiber Panel 19, 24 Simplex SC / 24 Duplex LC, Unloaded, 1U individually labeled ports 45 open working angle Accepts loose tube, distribution and pre terminated cables ROHS, REACH SvHC and UL rated Fits standard 19 For other types and number of adapters, panels are available on request. 30
AP4U Sliding Patch Panel with 12LGX Slots Superiortec offers an innovative, robust, 4U sliding panel with a smoked plexi glass hinged front door. This panel has been designed to accept up to 12 LGX style assemblies. With the ability to use a full array of adapter types, this panel offers a solution to the end user, enabling them to incorporate a multi functional chassis that allows easy access during installation. FEATURES AND BENEFITS 4U Modular Patch Panel Chassis U Size 4U (17.78cm) Width 43.18cm Net weight 24 kgs Packaged weight 24.9 kgs Packaged dimensions 52cm W x 45cmm H X 55cm D Suitable for Adaptor type LGX / MTP Cassettes Number of module positions 12 Material Cold- rolled steel Material thickness 16 Gauge Powder coating Colour RAL 9004 Operating temperature -40 c to +50 c Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304,IEC61754,EN297-1 Compliant to RoHS, Reach/SVHC Fiber Optic Products & APPLICATION Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications ORDERING INFORMATION Note: Adapters to be purchased separately as per page 36 31
APW3 Lockable Wall Box with 4LGX Slots Superiortec offers a wide range of indoor wall mounted splice enclosures the AMW enclosure offers a compact solution to the end user. This enclosure has been designed to accept up to 4 LGX style assemblies. With the ability to use a full array of adapter types this enclosure offers a flexible solution to the end user, enabling them to incorporate a multi functional enclosure that allows easy access during installation or rework with no disturbance of the existing cable or fibres. In the addition to the array of adaptors the enclosure also offers multiple cable entry solutions, fibre cable can be spliced or pre terminated solutions, making this enclosure one of the most flexible on the market. FEATURES AND BENEFITS 4 Slot Wall Box Height 17.78cm Width 43.18cm Depth 35.56cm Net weight 24 kgs Packaged weight 24.9 kgs Packaged dimensions 52cm W x 45cmm H X 55cm D Suitable for Adaptor type LGX / MTP Cassettes Number of module positions 4 Material Cold- rolled steel Material thickness 16 Gauge Powder coating Colour RAL 9004 Operating temperature -40 c to +50 c APPLICATION Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications ORDERING INFORMATION APW3 AM Style Lockable Wall Box 32
Fiber Patch Cords Series Superiortec High Performance Patchcords are a range of best in class patchcords employing highest grade components, manufacturing processes and test methods that offer excellent performance for demanding telecommunications and data centre applications. High Performance Patchcords are used were low loss budgets are essential and may be considered for splice replacement. FEATURES AND BENEFITS Conform to IEC, EIA-TIA, and Telecordia performance requirements End face geometry result data included RoHS, REACH & SvHC compliant CABLE SPECIFICATIONS Cable Material Strength Member Crush Operating Temperature Secondary Buffer Diameter (2.0mm, 2.4mm and 3.0mm) Secondary Buffer Diameter (1.6mm and 1.8mm) Colour ORDERING INFORMATION LSZH Aramid 1000N -20 to 60 C 900±50 μm 600±50 μm SM Yellow MM Orange(OM1,OM2) MM Aqua (OM3, OM4) Fiber Optic Products & Configuration: Duplex Fiber Type: 652 OM1 502 OM2 503 OM3 801 - SM Connector Type (end A) SC LC SC-APC Connector Type (end A) SC LC SC-APC length (meters) Jacket Type: LSZH D XXX yy yy 12 L 33
Fiber Pigtails Series Superiortec pigtails are used to in telecom, datacom networks and also in high speed netwroks. The pigtail buffer conforms to IEC, EIA TIA and Telecordia standards. The pigtails are terminated with standard Superiortec connector which gives optimum optical performance. FEATURES AND BENEFITS SC, LC, ST, FC connectors (for SM and MM) and E2000 (for SM) APC connector option for SM Low smoke zero halogen (LSZH) buffer 900μm tight buffer or easy strip Different connector performance range for specific application Available in standard 12 colours as per IEC 60304 BUFFER SPECIFICATIONS Crush Operating Temperature Nominal buffer Diameter Max Tensile Load 500 N/10dm -20 to 60 C 900+50 μm 6N ORDERING INFORMATION Fiber Type: 652 OM1 502 OM2 503 OM3 801 - SM P XXX yy 12 L Connector Type: SC LC SC-APC length (meters) Jacket Type: LSZH 34
Fiber Connectors Series Superiortec manufactures a range of SC and LC connectors suitable for various applications. SC connectors are used in most of the latest network applications and with less parts and a plastic body which offers an economical option. The LC connector is a small form factor fiber optic connector which helps to reduce the space on panels or outlets by 50%. It s cost effective as it simplifies movements, additions and changes. The LC connector uses a 1.25mm ferrule which is half the diameter of the standard ferrule. The SC connectors are available in singlemode both PC and APC and in multimode PC. The LC connectors are available in singlemode both UPC and APC and in multimode UPC. The connectors come with standard boots suitable for 900μm, 2mm cable diameters (SC and LC) and 3mm cable diameters (SC). The SC and LC connectors are available in standard colours including blue, green and beige. FEATURES Comply with IEC 61754-4, IEC 60784-14 and TIA 604-3 (SC connector) and with IEC 61754-20 and TIA 604-10-A (LC connector) The SC connector features a push-pull coupling mechanism for easy insertion and consistent connection and the LC has a compact design based on RJ45 style interface Zirconia ceramic ferrule with high end Ultra Physical Contact (UPC) finish Low insertion loss and back reflection RoHS, REACH SvHC compliant Available in standard colours and standard packaging Fiber Optic Products & MECHANICAL PROPERTIES CRITERIA EFFECT CONFORMANCE Mechanical endurance 500 matings <0.2 db change IEC 61300-2-2 Vibration 10-55Hz, 0.75 amplitude <0.2 db change IEC 61300-2-1 Operating temperature -25 to +70, 12 cycles <0.2 db change IEC 61300-2-22 35
Fiber Adapters Series Superiortec offers a range of quality adaptors which have high precision alignment sleeves for improved reliability and better reconnectability. The LC adaptors come with ceramic sleeves for singlemode and phosphor bronze sleeves for multimode. The housing is available in different colours with options for flange or flangeless body and metal, or inbuilt, clips. FEATURES Comply with IEC 61754-4, -20, IEC 60784-14 standards High precision alignment sleeve Low insertion loss and improved reconnectability RoHS, REACH SvHC compliant SC type is available in simplex and duplex adaptors, LC type is available in simplex, duplex and quad adaptors Other types of adapters are also available on request TECHNICAL SPECIFICATIONS CERAMIC PHOSPHORE CONFORMANCE BRONZE Insertion Loss (Typ) 0.1 db 0.15 db IEC 61300-3-4 Mating Durability 500 IEC 61300-2-2 Operating temperature -25 to +70, 12cycles IEC 61300-2-22 ORDERING INFORMATION ADA- Adapter CON- Connector XXX 123 y zz Fiber Type: 652 OM1 502 OM2 503 OM3 801 - SM Configuration: S simplex D Duplex 36 Type: SC LC SC-APC
Power Distribution Units Cable Managers Series Tools & Accessories Standard Horizontal and Vertical PDUs P 38 Intelligen PDUs P 40 Category 6 Products & Fiber Optic Products & Category 3 Products & Power Distribution Units 37
Standard Horizontal and Vertical PDUs Providing power inside cabinets to sensitive appliances such as servers and networking equipment can be a delicate issue. The power distribution units (PDUs) range from Superiortec provides the reliable power extension that you need. It is designed based on international standards, with creative structure and reliable quality. It has passed safety tests, and thus given certifications by international authorities. FEATURES AND BENEFITS Reliable output characteristics: socket sleeves are made from phosphor bronze, which is famous for its elasticity, wear resistance, diamagnetism and corrosion resistance. This ensures reliable contact and a single-pole pull-and-plug life of 5000 times plus, no loosing, no strike and reliable electric conductivity. Elegant and practical appearance: Black color, master switch (with indicator) and Easy mounting 45 degree socket orientation: this unique socket orientation enables plugging bulky plugs next to each other, which can be difficult in other regular PDUs. Flexible application: 6-way rack mount or 10-way vertical mount 38
Standard Horizontal and Vertical PDUs STANDARDS RoHS CE safety authentication Power Distribution Units Digital Ammeter: the vertical mount PDU comes with digital Ammeter to show the current consumption, which is updated instantly. ORDERING INFORMATION PWR6CSUKAH 19 Power Strip, 6-BS1363 (UK type) 13A 45-degree with Switch PWR10CSUKAV-I Power Strip, 10-BS1363 13A 45-degree with Switch and Ammeter, vertical mounting Other socket types and numbers are available upon request 39
Intelligent PDUs FEATURES AND BENEFITS The intelligent Power Distribution Unit (ipdu) is the world-advanced new generation network power distribution and monitoring device from Superiortec. The ipdu s advanced technology delivers excellent performance and powerful functions, in a safe and reliable manner. In nutshell, the ipdu enables IT administrators and Datacenter supervisors to monitor, control and manage the power of many equipments in any cabinet of a given data room. All of this can be done over LAN or WAN, making it feasible to connect to any location all over the world. MAIN FUNCTIONS System automatic alarm for the following cases: total load current, temperature and/or humidity exceed(s) limits, smog, door opening and waterlogging Alarming methods: The light indicator and buzzer alarm in the ipdu panel The visual indicator on the Web interface and the buzzer in PC alarms Automatic E-mails to system administrator Alarm information sent by SNMP Daisy-chain, with master and 9 slaves at most Logs record User management Accessing method: Web, SNMP (V1/V2/V3), Telnet and SSH Through internet, the ipdu can remotely monitor, control and manage: ORDERING INFORMATION The ipdu comes in different configurations, depending on the sockets number and type, access method, and mounting options. Our sales agents will be more than glad to assist you select the right configuration for your needs. 40
Cable Managers Series Fiber Optic Products & Cable Managers Series Tools & Accessories Power Distribution Units 19 Cable Manager Full metal with cover Metal with plastic rings Brush type Full plastic with cover Brush type with metal rings P 42 Category 3 Products & Category 6 Products & 41
19 Cable Managers Superiortec offers a wide range of cable management products, ranging from the light-weight, elegantly designed plastic rings type to the rugged, fully metal and covered type. Whether you need to organize small bundle of managed cables or fully conceal them for better overall rack look, Superiortec just has the right product to suit those needs. FULL METAL WITH COVER METAL WITH PLASTIC RINGS BRUSH TYPE FULL PLASTIC WITH COVER BRUSH TYPE WITH METAL RINGS ORDERING INFORMATION CM01MC CM02MC CM01PR CM01B CM01BMR CM01PC 1U Cable Manager, full metal with cover 2U Cable Manager, full metal with cover 1U Cable Manager, metal with plastic rings 1U Cable Manager, brush type 1U Cable Manager, brush type with metal rings 1U Cable Manager, full plastic with cover 42
Tools & Accessories Fiber Optic Products & Power Distribution Units Cable Managers Series Tools & Accessories Accessories P 44 Velcro tape Splicing heat-shrink sleeves Tools P 45 110 punch down tool Modular crimp tool Cable jacket stripper Fiber termination kit Category 3 Products & Category 6 Products & 43
Accessories The Cable Ties from Superiortec offer a clean, reusable reliable product. The Velcro-type is a convenient and cost effective method to bundle wires and cables whether in telecom rooms or to be used around office spaces. VELCRO To protect fiber splices safely and efficiently, Superiortec provides the Heat shrink sleeves for that purpose. These sleeves are applied on fibers to be spliced and then heated over an oven or heat gun. The sleeves come in transparent standard color. SPLICING HEAT-SHRINK SLEEVES 44
This high-quality punch down tool facilitates terminating data cables on the RJ-45 jacks. It comes with comfortable handle, and works with Cat5, Cat5e and Cat6 UTP/STP cables. It does not only terminate wire, but it also cuts off the excess wires in one step, resulting in efficient termination. Tools 110 PUNCH DOWN TOOL Tools & Accessories This crimping tool from Superiortec is used for terminating RJ45 plugs with four-pair, twisted cable to make patch cord assemblies. It can also be used for terminating a RJ12 or RJ11 plug with a three-pair or two-pair phone cable. MODULAR CRIMP TOOL The cable stripper removes the outer sheath from most round data cables (up to 11mm in diameter) to prepare for termination. This tool is light-weight, small and easy to use: just insert cable and rotate the tool twice then remove cable for a quick and clean strip. CABLE JACKET STRIPPER This fiber termination kit comes loaded with the high quality range of Superiortec Tools that facilitate fiber termination. All tools are packed into their own cut-foam compartment to keep them safe from damage, and all are presented in a robust and ruggedized case, ideal for such fragile equipment. The case includes Inspection Scope, Fiber Optic Stripper and crimping tool, Kevlar Scissors, Cable Ringing Tool, Universal Stripping Tool, Fluid Dispenser, Sin Bin, Polishing Pucks, 1 Yellow Syringe Tips and syringes, pack of Lint Free Tissue, Lapping Film, Glass Polishing Plate, Heat Cure Epoxy and Termination Oven (for heat cure kits) or Cold Cure Epoxy and activator (for cold cure kits). FIBER TERMINATION KIT 45
EXTENDED PERFORMANCE/SYSTEM AND PRODUCT WARRANTY Superior Technologies FZ LLC offers two choices of warranty programs. The first warranty will cover the Component warranty which is a standard from the manufacturer, and the second will be the System warranty which will cover from installation to system support. 1. 15-Year Product/Component Limited Warranty certifies that all passive CAT 6 connecting hardware conform to the applicable TIA/EIA-568-C specifications, and all passive products will be free from defects in material and workmanship. This warranty extends to the original purchaser from 15 years from the date of purchase, provided the purchaser has invoice documentation or proof of purchase. This warranty does not cover the installed, system performance. 2. 25-Year Performance/System Limited Warranty certifies that all Superior Technologies passive connecting hardware, that has been installed by a certified Installer, will support all applications designed for data transmission over Category 6 or as applicable, and that these components will perform to the applicable channel and permanent link specifications of TIA/EIA 568-C.2 Clause 6 and ISO/IEC IS 11801 for passive cabling channels. They shall be free from defects in material and workmanship for at least 25 years from the date of purchase. The limited warranty covers all Category 6 Superior Technologies products, where such products were installed in a registered and validated installation by a Certified Installer, at Superior Technologies sole discretion. The warranty will be processed should the installation meets the following: a. All links should be tested by recognized test equipments. b. The testing for all nodes should be done on permanent links. c. The warranty application forms as well as other documents (please refer to the application form) should be submitted. The following provisions apply to the above warranties. Superior Technologies will accept the liability to replace and or repair of any materials that has been damaged before installation of the materials with proper investigation which will be done by the Technical team of Superior Technologies. Any defective materials should be received by the company within 10days and replacement will be done within 20 days after the proper investigation and or subject to the availability of the items free of charge. If in any case, the reported defective materials happen to be working properly, the customer will be accountable for any incurred cost that Any damages arising due to the mishandling, misuse, abuse, neglect, accidental damage, alteration and wrong installation will be the SOLE RESPONSIBILITY OF THE CUSTOMER and Superior Technologies will not be liable for the LOSS OF PROFITS or INCIDENT, INDIRECT or OTHER CONSEQUENTIAL DAMAGES due to aforesaid reason. PROGRAM REGISTRATION AND VALIDATIONS To register a project in the 25-Year Performance/System Limited Warranty, the CERTIFIED INSTALLER must submit the completed warranty application form and the additional required project documentation as stated in the application form to SUPERIOR TECHNOLOGIES for validation. Once SUPERIOR TECHNOLOGIES have deemed the project valid, Superior Technologies will issue an authenticated and numbered certificate. Where the Certified Installer is no longer available, please contact SUPERIOR TECH- NOLOGIES. 46
connectivity solutions CONTACT DETAILS UAE Address Superior Technologies and Services JLT P.O Box 309084, Dubai Tel: +971 4 3912370 Fax: +971 4 3918651 sales@superiortec.net www.supeirortec.net UK Registered Office Superior Technologies (UK) Limited SA14 6SN Llanelli, Dyfed Wales www.superior-uk.com superi rtec