JE242 24 TV User s Guide Please observe all safety precautions when using this product. Please read this manual careful Guide de l utilisateur du téléviseur de 24 Veuillez observer toutes les mesures de sécurité en utilisant ce produit. Veuillez lire soigneusement ce manuel avant d utiliser ce produit. Français
CONTENTS Safety Precautions Important Information... 3 Important Safeguards... 4~5 User Guidance Information Names of each part(front View) / Accessories... Names of each part(back View)... 7 Mounting on a Desktop / Installation Precautions... 8 Power Input Connecctions / Installing an Antenna... 9 Remote control... 0~ Precautions / How to use remote control... 2 Connection VCR Connections / Digtial Amplifier Connections / Watching Video Tape... 3 Satellite/Cable TV Set-Top Box Connections / Watching Cable TV... 4 External Amplifier / SERVICE USB Connections... 5 JENSEN DVD Connections for IR / PC Connections / How to use as PC monitor... Basic Use Selecting input source / Inital Wizard... 7 Application Menu Operation... 8 Customizing the PICTURE Settings... 9 Customizing the AUDIO Settings... 20 Customizing the TIMER Settings... 2 Customizing the SETUP Settings... 22~23 Customizing the LOCK Settings... 24~2 Customizing the CHANNEL Settings... 27~28 Maintenance and Service Trouble shooting... 29 Specifications... 30 2
Names of each part POWER 2 3 4 SOURCE Button VOL- / VOL+ Button Button-OSD Menu Display Button POWER Button CH- / CH+ Button Accessories Cable 5
Names of each part Back View 2 PC IR Out 0 9 8 DC 2V 2 3 4 5 7 DC 2V 2 AV2 IN ( VIDEO and AUDIO) 3 SERVICE jack 4 7 0 HDMI jack AV IN (VIDEO and AUDIO) SPDIF 5 8 HDMI2 jack PC AUDIO AUDIO(L/R) OUT VGA 9 IR jack 2 RF(ATSC/NTSC) 7
Mounting on a Desktop Installation Precautions Wall Mounting ensure Using the Stand 8
POWER input Connections Connecting to POWER INPUT +2V DC 2V 2V Power Cable (Included) (+)2VDC (-)2VCC NOTE:Optional AC/DC adapter available. Optional Cigarette adapter available. Installing an Antenna PC IR Out 9
Remote Control 2 3 4 5 7 8 9 0 2 3 4 5 7 8 9 20 2 22 23 24 28 25 2 27 30 29 3 32 33 35 34 37 3 38 39 40 2 3 4 5 7 8 9 0 2 3 4 5 7 8 9 20 2 22 23 24 25 2 27 28 29 30 3 32 33 34 35 3 37 38 39 40 TV Activate TV Mode POWER On / off for TV and DVD DVD Activate DVD Mode PREVIOUS(DVD) FAST REVERSE(DVD) FAST FORWARD(DVD) NEXT(DVD) EJECT(DVD) STOP(DVD) PAUSE(DVD) RPT(DVD) Repeat Selection T/F(DVD) ZOOM(DVD) SUB-T(DVD) DISP(DVD) Display Time or Chapter information SET UP(DVD) AUDIO(DVD) EQ(DVD) TITLE(DVD) C-LIST Press C-LIST button to display the channel list F-LIST Press this button to display the favourite list MTS/SAP Press MTS/RPT to select Stereo,SAP or Mono SOUND Press SOUND to cycle select sound types: Standard/ Music/ Movie/ Personal SLEEP Cycles through the LCD TV sleep time:off/5/ 0/5/30/45/0/90/20/80/240 minutes CC SCALE PICTURE NAVIGATION INFORMATION Close Caption Cycles among scale mode:wide,cinemal,normal,zoom. Press PICTURE to cycle select picture types: Standard/ Dynamic/ Soft/ Personal Displays the OSD menu on the screen up, down, left or right Press INFO to display a variety of information about current channel. ENTER Press ENTER to confirm your opeartion EPG Displays the program guide EXIT CH+/CH- Increase or Decrease channel SOURCE Displays AV Inputs MUTE Press once mutes audio,press again to restore audio VOL+/VOL- Increase or Decrease volume NUMERIC KEYS Digital channel selection RETURN Return to previously viewed channel 0
Remote Control BUTTON TV-FUNCTION DVD-FUNCTION BUTTON TV-FUNCTION DVD-FUNCTION BUTTON TV-FUNCTION DVD-FUNCTION POWER POWER POWER EPG EPG STOP CH CH+ CH- T F T-F PLAY-PAUSE VOL VOL+ VOL- VOL+ VOL- EJECT PREVIOUS RETURN RETURN FAST-REVERSE MUTE MUTE FAST-FORWARD 2 2 2 NEXT INFO INFO 3 3 3 RPT RPT UP UP 4 4 4 ZOOM ZOOM DOWN DOWN 5 5 5 SUB T SUB-T LEFT LEFT DISP DISP RIGHT RIGHT 7 7 7 SETUP SETUP ENTER ENTER OK 8 8 8 AUDIO AUDIO SOURCE SOURCE SOURCE 9 9 9 EQ EQ EXIT MTS/SAP F-LIST EXIT MTS-SAP F-LIST 0 0 0 SCALE C-LIST SCALE C-LIST TITLE CC SLEEP CC SLEEP TITLE PICTURE PICTURE SOUND SOUND NOTE: DVD functions are intended for JENSEN DVD players only. See your JENSEN DVD manual for more information.
Precautions are good. How to use remote control 2
VCR Connections Terminals vary by manufacturer DC 2V Composite Cable(Included) Connect the TV S Composite In terminal to VCR s Composite OUT terminal using the included Composite cable. Digital Amplifier Connections Connecting to a Digital Amplifier Terminals vary by manufacturer. <Digital Amplifier> SPDIF Cable (Not Included) PC IR Out Watching Video Tape SOURCE 3.Press ENTER to confirm the source selection or stop operation a few seconds, will automatically enter the selection mode. 4.Turn on the VCR,insert the tape and press play button. 3
Satellite/Cable TV Set-TOP Box Connections Terminals vary by manufacturer DC 2V Composite Cable (Included) DC 2V (Not Included) Watching Cable TV SOURCE ENTER 3. Press to confirm 4. will automatically enter the selection mode. the source selection or stop operation a few seconds, 4
Connection External Amplifier Connecting to an amplifer or home theater system. Terminals vary by manufacturer. (Not Included) PC IR Out audio output level. SERVICE USB Connections Connection to SERVICE USB. DC 2V Note: This USB connection is for software upgrades only. Does not support any other USB function. 5
JENSEN DVD Connections for IR Connection to 2 volt JENSEN DVD player IR control. PC IR Out All JENSEN Remote Control DVD Functions can be controlled Via the TV IR receiver. You do not need to point the remote conrol at the JENSEN DVD player when this option is used. NOTE: DVD IR control is intended for JENSEN DVD players only. See your JENSEN DVD manual for more information. PC Connections Terminals vary by manufacturer. DC 2V VGA (Not Included) (Not Included) PC IR Out VGA a VGA ( a 3.5mm (Headphone) audio cable. How to use as PC monitor SOURCE 3. Press ENTER to confirm the source selection or stop operation a few seconds,will automatically enter the selection mode..
Selecting Input Source Note: After you selected the desired input sorce, if stop operation a few seconds, then will automatically enter the selection mode. INPUT SOURCE TV AV AV2 HDMI HDMI2 Inital Wizard After connecting your TV antenna or cable wire, turn the television ON. The quick setup wizard will display on-screen. Select your preferred picture setting followed by antenna options and performing Auto Scan to receive local broadcast channels that will be stored in the TV tuner memory. Wizard Menu Language Air/Cable Cable Cable System STD Auto Scan Select Exit The wizard will direct you to the TV menu to select antenna options and run Auto Scan. s found will be stored in the TV tuner memory. How to Navigate: Press the arrow button to highlight Menu Language and then press button to select OSD Language. Press the arrow button to highlight CABLE or AIR based on your antenna connection. Press the arrow button to select Auto Scan and press ENTER (when Cable is selected, AUTO is recommended). Otherwise, press the arrow button to select Cable Systerm: STD > IRC > HRC > Auto. 7
Menu Operation Use the LEFT and RIGHT buttons to select your main menu option. AUDIO Allows you to customize the sound options and effects. 2 2 Standard Mode Contrast Bass 50 50 Treble Tint 0 TV Speaker 50 50 50 Off AVC Off PCM Language Select Exit Balance SPDIF Type Normal HDMI CEC 50 50 Color Sharpness Standard Sound Mode Brightness Color Temp Select Exit TIMER : SETUP : Allows you to set up a variety of time options. Allows you to set up a variety of setup options. 2 2 Sleep Off Menu Language Time Zone Pacific Transparency Daylight Saving Time Off Off Zoom Mode Normal Off Noise Reduction Close Capation Fixed OUT Restore Default Select Exit Select Exit LOCK : CHANNEL : Allows you to set up a variety of lock options. Allows you to search channels and set up a variety of channel options. 2 2 Air/Cable Change Password System Favorite Canada Show Hide RRT Setting No Reset RRT Label Next Exit Select 4 5 Auto Scan On US Air 50 3 KOCE LB Good DTV Signal Press the button to exit submenu to return to the main menu. Press the button again or EXIT button to exit the main menu. Some options are not available for all inputs. 8 Exit
2 2 Customizing the PICTURE Settings or EXIT button to exit. Mode Contrast Brightness Color Tint Sharpness Color Temp HDMI CEC Standard Normal 50 50 50 0 50 Select Exit Mode Contrast Brightness Color Tint Cycles through picture display modes: Standard, Dynamic, Mild, User. Controls the difference between the brightest and darkest regions of the picture. Controls the overall brightness of the picture Controls the color. Controls the tint. Sharpness Increase this setting to see crisp edges in the picture; decrease it for soft edges. Color Temp HDMI CEC Cycles through color modes: Normal, Cool, Warm. CEC Mode TV Auto Power TV Auto Switch Device Auto Standby On On On On Select Return If you turn off the CEC Mode then the following items(tv Auto Power,TV Auto Switch,Device Auto Standby) will not be used. TV Auto Power On-TV will turn on when compatible CEC device is activated on HDMI connection. TV Auto Switch On-TV will switch to HDMI inputs when compatible CEC device is activated on HDMI connection. Device Auto Standby On-When TV turned off, any connected, compatible CEC device will also turn off. 9
2 Customizing the Settings or EXIT button to exit Sound Mode Bass Treble Balance TV Speaker AVC SPDIF Type Language Standard Off Off PCM 50 50 50 Select Exit Sound Mode Bass Treble Balance TV Speaker AVC SPDIF Type Language Cycles through sound modes: Standard, Music, Movie and User. Controls the relative intensity of lower pitched sounds. Controls the relative intensity of higher pitched sounds To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track. Allows you to select between ON and OFF. On or off (Automatic Volume Control) keep volume level steady. Allows you to select beteen PCM and RAW (Digital connection to Home Theater system) Allows you to select audio languages:, French and Spanish. 20
2 Application Customizing the TIMER Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the TV on. 2. Press the button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the TIMER. 3. Use the UP and DOWN buttons to highlight an individual TIMER option, use the LEFT and RIGHT buttons to change the setting, and press the or EXIT button to exit. Sleep Time Zone Daylight Saving Time Off Pacific Off Select Exit The TIMER menu includes the following options : Sleep Time Zone Daylight Saving Time Allows you to set up the sleep timer : 5min, 0min, 5min, 30min, 45min, 0min, 90min, 20min, 80min, 240min and off. Allows you to select correct time zone: Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Allows you to turn on or off the daylight saving time. 2
2 Application Customizing the SETUP Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the TV on. 2. Press the button on the remote control to display the Main menu, and use the LEFT or RIGHT button to select the SETUP. 3. Use the UP and DOWN buttons to highlight an individual SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the or EXIT button to exit. Menu Language Transparency Zoom Mode Noise Reduction Close Capation OUT Restore Default Off Normal Off Fixed Select Exit The SETUP menu includes the following options: Menu Language Transparency Zoom Mode Noise Reduction Allows you to select menu languages:, Français and Español. Allows you turn on or off the transparency function of on screen menu. Allows you to select the zoom modes: Normal, Cinema, Wide and Zoom. Allows you to select the noise reduction modes: Strong, Off, Weak, Middle. 22
2 2 Application Customizing the SETUP Settings Close Caption Use Down button to highlight Close Caption, then press RIGHT button or ENTER to enter into the following menu. CC Mode Basic Selection Advanced Selection Option On CC Service Select Return CC Mode Allows you to select the CC Modes: On, Off and CC on Mute. Basic Selection Allows you to select the basic selections: CC, CC2, CC3, CC4, Text, Text2, Text3 and Text4. Advanced Selection Allows you to select the advanced services: Service, Service2, Service3,Service4, Service 5 and Service. Option Use Down button to highlight the Option item, then press RIGHT button to enter into the following menu. Mode Font Style Font Size Font Edge Style Font Edge Color FG Color BG Color FG Opacity BG Opacity Custom Default Default Default Default Default Default Default Default Select Return Use UP and DOWN buttons to highlight the desired item, and use LEFT and RIGHT buttons to select. Out Restore Default Allows you to select between Variable and Fixed. Restores all settings in SETUP menu to factory settings. 23
2 2 2 Application Customizing the LOCK Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the TV on 2. Press the button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the LOCK 3. Use the DOWN button to highlight Enter Password, use the numeric keys to input 4-digit password. After that, the screen will display the next menu. After setting, press menu or exit button to exit. NOTE: The factory password is 0000. Enter Password Change Password System On input US 4-digit password Canada RRT Setting Reset RRT Select Exit Next Return The LOCK menu includes the following options : Change Password Use DOWN button to select Change Password, then press RIGHT or ENTER button to enter into the following menu. Enter New Password Confirm Password 0-9 Return System Input the new 4-digit password and confirm it. Allows you to turn On or Off the system lock. If you turn off the system lock, then the following items(us, Canada, RRT Setting and Reset RRT) will not be used. 24
2 2 Application Customizing the LOCK Settings US Use Down button to highlight US, then press RIGHT or ENTER button to enter into the following menu. TV MPAA N A NEXT Return TV Use Down button to highlight TV, then press RIGHT or ENTER button to enter into the following menu. TV RATING ALL FV V S L D TV Y TV Y7 TV G TV PG TV 4 TV MA Block Press ENTER to or Unlock NEXT Return Use UP and DOWN buttons to select the desired rating and press ENTER button to block or unblock rating. MPAA The Movie rating (MPAA) is used for original movies rated by the Motion Association of America (MPAA) as broadcasted on cable TV and not edited for television. Use UP or DOWN button to select N/A, G, PG, PG-3, R, NC-7 or X. RATING G PG PG-3 R NC-7 X DESCRIPTION General Audiences. Movie is appropriate for all ages. Parental Guidance Suggested. May contain material not suited for younger viewers. Contains content that may not be appropriate for viewers under the age of 3. Restricted. Contains adult content, no one under 7 admitted without parent. No one 7 and under admitted. Adults only. 25
2 Application Customizing the LOCK Settings Canada Use Down button to highlight Canada, then press RIGHTor ENTER button to enter into the following menu. Canada Canada French G G Select Return Canada Use LEFT and RIGHT buttons to select among: E, C, C8+, G, PG, 4+ and 8+ Canada French Use LEFT and RIGHT buttons to select among: E, G, 8ans+, 3ans+, ans+ and 8ans+ RRT Setting Reset RRT Allows you to reset the RRT setting. 2
Application Customizing the CHANNEL Settings Select TV source for example. (Press SOURCE button to select TV mode). Press the POWER button to turn the TV on. 2. Press the button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the CHANNEL. 3. Use the UP and DOWN buttons to highlight an individual CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the or EXIT button to exit. 2 Air/Cable Air Auto Scan Favorite Show Hide 50 3 No Label KOCE LB Good DTV Signal Select Exit The CHANNEL menu includes the following options : Auto Scan Allows you to select between Air and Cable. Use Down button to highlight Auto Scan, then press RIGHT or ENTER button to enter into the following menu. 2 Auto Cable System Start to Scan Select Air/Cable Return If you select Air as input signal in Antenna, you can press RIGHT or ENTER button to search the channels automatically. 2 RF CH 7 Found 4 NEXT Return The receivable channels will be stored automatically. When searching channels, press to stop. 27
2 2 Application Customizing the CHANNEL Settings If you select Cable as input signal in Antenna then you can select Cable Systems: Auto, STD, IRC and HRC. Use DOWN button to highlight Start to Scan, then press RIGHT or ENTER buttonto search the channels automatically. The receivable channels will be stored automatically. When searching channels, press to stop. Favorite Allows you to add these channels as the favorite channels. Use UP or DOWN button to highlight Favorite, then press RIGHT or ENTER button to enter into the following menu. No Program Name Favorite 2 0 4 4 2 4 3 50 50 2 50 3 0 ATSC ATSC 2 ATSC 3 KOCE HD KOCE SD KOCE LB Select Return Use UP and DOWN button to highlight the desired channel, then press ENTER button to add or remove the highlighted channel as favorite. Show / Hide Allows you to show or hide the channels. Use UP or DOWN button to highlight Show / Hide, then press RIGHT or ENTER button to enter into the following menu. No Program Name Show 2 0 4 4 2 4 3 50 50 2 50 3 0 ATSC ATSC 2 ATSC 3 KOCE HD KOCE SD KOCE LB Select Return Use UP and DOWN button to highlight the desired channel, then press ENTER button to show or hide the highlighted channel. No. Displays the number of current channel. Label Displays the label of current channel. DTV Signal Displays the quality of current DTV signal. 28
Maintenance and Service Trouble shooting In case a problem occurs with your TV, please take the following steps first. If you still have the problem, turn the power off and contact your dealer or an authorized service center. Problem The screen does not appear. The screen appears too slowly after the power is turned on. Screen is too bright or too dark. Screen is too large or too small. Stripes appear on the screen and it shakes. The screen does not move. Screen appears, Voice is not heard Remote control does not work Action Is the power plug connected? Insert the power plug. Press the power button of the remote control. This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on. But if the screen does not come after minute contact your dealer or an authorized service center. Perform brightness adjustment or Contrast adjustment. Adjust the screen size. Stop using wireless telephones, hair dryers and electric drills. Press the PAUSE button. Check if the Pause button is pressed on external equipment.. Press the "MUTE"button. 2. Increase the sound level by pressing volume adjustment button. 3. Check if sound terminal of external input is connected properly. 4. Check if audio cables are connected properly. 5. Select and check the other input. If the sound still does not work and the other channels are the same after you have done as the above, contact your dealer or an authorized service center.. Check if main power is On. 2. Check that the batteries of the remote controller were loaded properly. 3. Check to see if any obstacle exists between the TV and the remote control, then remove it, if any. 4. If the batteries are low, replace them with two new batteries. 29
Maintenance and Service Specifications Panel Max. Resolution INPUT OUTPUT Power Source Power Consumption Dimension Weight Panel Size Brightness Contrast Ratio Viewing Angle VIDEO AUDIO (L/R) PC/AUDIO(L/R) HDMI RF IR AUDIO (L/R) SPDIF 24 TFT 300 000: 70 0 /0 0 920 x 080 2 2 2 DC 2V 3.3A 40W 573W x 37H x 48D mm Kg The cabinet design and electronics specifications will be modified without prior notice for performance improvement. Weight and dimensions are approximate 30