Emtelle Aerial Blown Fibre
Solution Overview For Span Lengths of between 30-60 metres Only One Tube Bundle between Poles A Joint Closure can be added every 5 poles or more depending on housing density Tubes can be dropped off from Poles to Homes directly, then fibre is blown in
Product Map: Over Head Product code: 61834 1way Drop tube 7/3.7mm Product Code: UK_DS_7500 Customer Leap In Point Product code: CP922 2 x 10/8 tubes and 8 x 5/3.5mm tubes Aerial Branch Closure Emtelle Code 70957 Integral Bearer cable Fitting Suspension Clamp Emtelle code 9252 S- hook Emtelle Code 9354 12 72 fibres fit into the 10/8 tubes Cable Clamp AC68L Emtelle Code 9248 2 fibre for FTTH, Emtelle code 9032 Dome Splice Enclosure, Overhead Code 9040 D-side E-side 4 way 5/3.5mm Tube Bundle. Emtelle Code CP902D
Tube Bundle Information
Drop Microduct Information
Hanging Information
Hanging Information
Installed without tools Span Mounted 4 drop ducts per closure Drop Closure
Splice Closure Mole Mounted, Cabinet Mounted or installed in manhole 8 customer drops, plus Tube Bundle compatible 72 fibre splicing capacity IP68 Rated Mounting bracket available (below)
Blown Fiber Accessories Full Range of straight connectors, Direct Bury Connectors, Reducers, Ends stops, Gas Seals and water seals No other Blown Fiber manufacturer has access to all of the connectors shown below Straight Connectors Straight Reducers End Caps Direct Bury & Lock Connector Gas & Water Block Connectors Centre Blow Connectors (Closedowns) Splittable cable and ducts seals
Blown Fiber Bundles & Cables Full Range of Fiber Bundles and Mini Cables, manufactured by Emtelle or preferred partner if required. FIBER BUNDLE MINI CABLE 2, 4,6,8 & 12 fibers / bundle Diameter 1.1mm 1.6mm Available in Singlemode G652d, G657A1, G657A2, MultimodeOM1, OM2, OM3 & OM4 Mini cables vary from 5.8mm 10.5mm diameter for 24-288 fiber G657A1 & G652d Emtelle are one of the only companies in the world to manufacture Tube Bundles, Mini Cables, & Fibre Bundles at one manufacturing plant This means that you can buy all products under 1 Guarantee
How Far can you blow fiber in One point to point blow? 4 fiber - upto 1500m max in typical route 500m in this route (up and down 4 times) (average installation speed was 49m/min) 8 & 12 fiber 800 1000m 72 fiber cable in 10/8 tube, 1000-1500m 72 fiber cable in 12/9.4mm tube 2.2km 96 fiber cable in 12/9.4mm tube 1000m The above distances are point to point blows. Fiber can be centre blown and onward blown to get 6km splice-less fibre lengths.
Other Overhead Products Emtelle have developed overhead systems for clients overseas and in the UK. Below is an example of the products which are currently available. Overhead solutions may play a critical part in connecting rural communities. Benefits of Blown Fibre on Poles A One Time installation for many tube pathways. The new system of 14mm tubes can take 96 or even 144 fiber mini cables. The smaller 4/2.7mm tubes can take 2 or 4 fibers bundles. The 5/3.5mm tubes can accommodate 2,4,8 or 12 fiber bundles.
FTTX Global Projects
FTTX Global Projects
KEY FACTORS FOR FTTH INSTALLATIONS EASY TO INSTALL, ASSEMBLE AND USE PRODUCTS REDUCED SKILL REQUIREMENTS SO INSTALLATION CANNOT GO WRONG COST EFFECTIVE AND UPGRADEABLE ADAPTED FOR LOW COST CONSTRUCTION TECHNIQUES
This blowing machine is manufactured for Emtelle and is electronically driven, monitoring fibre at all times. No other blowing machine has this ability Fibre installation Equipment
BLOWING EQUIPMENT MINI CABLES 100-240V OPERATION OR PNEUMATICALLY DRIVEN (BETTER) 12-15 BAR AIR PRESSURE REQUIRED WITH AFTERCOOLER & FILTRATION ACCEPTS CABLES FROM 3-11MM DIAMETER
Emtelle - Our Key Features (compared to other manufacturers) Un-rivaled Product Range ( Over 1000 designs) Largest single Microtube manufacture plant One of the only companies to make tube bundles, fiber bundles & fiber mini cables (upto 96 fibres) The largest range of tube connectors Sole supplier to British Telecom The Inventors of Blown Fiber solutions Emtelle seen as the pioneers of Blown Fiber Tubes Other manufacturers follow our lead with regards to design Engineers have between 5-20 years field experience Emtelle carry out cable blowing trials and approvals for Telecom Operators
Contact Adress: 6 Naplás Street, 2142 Nagytarcsa Phone: +361 323-1097 Mobil: +3630 297-7378 Email: kereskedelem@eximkabel.com ; zskovacs@eximkabel.com Website: www.eximkabel.com ; www.emtelle.com Online catalogue: http://www.emtelle.com/emtelle-fibreflow-catalogue/ Youtube channel: https://www.youtube.com/user/emtelle1