MONDO VIDEOSCREENS AND LED SOLUTIONS DESCRIPTION A MONDO video screen is not only a product but a full package that includes personalized service done at different stages, from before to after the production and installation of the video screen: Process stages: 1. Personalized solution study. 2. Project development. 3. Video screen manufacturing process. 4. Installation, start-up and training 5. Maintenance and after sale service
BASIC TECHNOLOGY CONCEPTS Led: It is a semiconductor Light Emitting Device. There are two types: Through hole: the LED is mounted through the printed circuit board. SMD: the LED is mounted on the surface of the printed circuit board (Surface Mounted Device). LED Through Hole LED SMD Pixel Pixel Pitch Pitch
DIFFERENCES BETWEEN LEDS SMD 3 IN 1 AND LED THROUGH HOLE The SMD LED is smaller than LED in-through hole. A pixel based on LED-through hole is usually composed of 3 leds (1 red+1 green+1 blue: 1R1G1B), but it occasionally uses other layouts, such as 2 red+1 green+1 blue (4 LEDs: 2R1G1B ). 1R1G1B 2R1G1B A pixel based on SMD LEDs typically uses the 3 in 1 SMD technology, which integrates the three LEDs in one package. Thanks to the smaller physical size and the ability to integrate multiple diodes in a single encapsulated, SMD technology allows the manufacture of a smaller pitch videoscreen compared to the hole-through technology. The 3 in 1 SMD technology enables the manufacture of screens with greater clarity, since the distance between pixels is almost constant, regardless of the colour shown. Due to this circumstance the maximum distance of a screen display using SMD LED technology is increased by 25% compared to the traditional through hole encapsulated, even if using the same resolution. Considering all these differences, LED SMD technology is most suitable for indoor purposes and LED through hall is usually used for outdoor purposes. Pixel: It is the minimum homogeneous colour unit in a digital image. In full colour video screens each pixel consists of at least 3 LEDs. Resolution: It is the videoscreen size expressed in pixels. Pitch: It is the separation between pixels, usually expressed in millimeters. Graphic surface: It is the surface displaying the images and contents. It has no structural elements such as frames or rims. It is usually expressed in square meters.
Minimum viewing distance: It is the minimum distance from which the videoscreen images can be properly and clearly seen. As a general rule is equal to the pitch, but expressed in meters: ie the minimum viewing distance in a 10 mm pitch videoscreen is 10 m. Maximum viewing distance: It is the maximum distance from which the videoscreen images can be properly and clearly seen. It depends on the size of screen graphical surface. Vision angle: The maximum angle from which a viewer can view the contents corrected emitted by the screen. Angles should be considered in the vertical and the horizontal point of view. VIDEO SCREEN During the study process, MONDO analyses the customer needs and the facility specific features. With all that information MONDO suggests the customer specific technical features for the video screen such as: LED THROUGH HOLE or LED SMD technology: Pixel and resolution needed, depending on the technology chosen and the average viewing distances. Graphic surface in m2 depending on the facility size (maximum viewing distance) and the video screen functions required Videoscreen pitch (mm), that also defines the minimum viewing distance. Vision angle considered in the vertical and the horizontal point of view. The final video screen defined is a LED panel modular configuration including its own control elements. IP65/IP45 IP65/IP45 IP65/IP45 IP65/IP45 IP65/IP45 IP65/IP45 IP65/IP45 IP55/IP45
CONTROL SYSTEM ELEMENTS During the study process MONDO s technical department defines the control system elements that will be needed depending on the videoscreen final location and the expected final use, such as: 1. Computer control: it controls the management of the video screen and incorporates the control and reproduction software. 2. Processor: It processes video signals, translates the screen protocol and sends it to the distributor through optical fiber. 3. Distributor: It receives the signals from the processor and distributes them to the different LED video screen modules. 4. LED video screen: It is the graphic surface emitting the images. 5. Power distributor: Provides power to the modules. 6. Video scaler: It connects the video screen to the different video input sources with different formats. 7. Mondo video processor. REMOTE CONTROL SYSTEM This service allows the customer to remotely manage the content shown on the video screen (images, videos, playlists, etc ) from any possible location in the world. The MONDO software and an Internet connection are the only two things needed. SUPPORTING STRUCTURE The video screens have to be placed on a substructure. This part is designed and manufactured entirely in a MONDO factory. MONDO engineering and technical department designs the video screen structure and makes the appropriate structural calculations to ensure safety of the installation. For bigger size video screens, walkways for maintenance can also be included in the structure. The structure design includes fixing anchors for accessory elements such as: Fixing anchors for engine systems. Fasteners for audio equipment. Fixing anchors for video equipment (cameras zenith, light effects, etc.) Elements for fixing static advertising.
ELECTRONIC COMPONENTS AND CALIBRATION Once the project is completely defined, the video screen manufacturing process comprises the following stages: 1. LED selection, which is done for each video screen to ensure an homogeneous light intensity for all of them. 2. LED matrix plate manufacturing. The LEDs and other components are inserted into the PCB with automatic machinery. Then, they are checked one by one. 3. Control plate manufacturing. 4. Module assembly. All boards and electronic components are mounted on aluminum frames and modules are checked individually. 5. Color calibration and final inspection. Several quality checks and controls are performed to minimize unexpected incidents during installation. The LED calibration process improves image quality by optimizing color and brightness uniformity of the video screen different pixels of. This process uses specific software and advanced optical technology, u a colorimeter-photometer. The calibration process allows uniformity of 3% in brightness tolerances and a 3 nm in color temperature. SPECIFIC SOFTWARE DEVELOPMENT MONDO develops its own control software to customize the product to the client needs. The most important softwares develop by MONDO are MONDO PLAYER (multipurpose use) and MONDOVIDEO (multisport use). MONDO PLAYER: It is a software developed by MONDO s electronic R&D department. It s an advanced video player, with features and functionality that have been adapted to the most common applications used for big size video screen. This software is compatible with any size and video screen models, regardless of its resolution. Positioning pixel by pixel of the player output. Several separate windows for easy handling of the different program functions. Video player with automatic scaling to the video screen. Image viewer with automatic scaling. Create and edit text and subtitles in scroll. MONDOVIDEO: The MONDO video screens can be used as conventional electronic scoreboards for all sports with this specific software. The software generates an image that represents an electronic scoreboard displayed in the video screen. The scoreboard information is updated in real time based on information received from the MONDO control panels. The software is customized depending on the size and resolution of the video screen to ensure the best possible image quality. The software can be installed on the same video screen control computer.
The system is certified FIBA approved for the highest competition level (Level 1). It has been already used in World Basketball Championship, European Basketball Championship, Final Four Euroleague and ACB professional basketball league. INSTALLATION AND TRAINING FULL SERVICE A team of technicians install the complete product package in the final location. Installation also includes several previous stages: Carrying out electrical installation and wiring onsite. Data wiring installation (optical fiber) from the control room to the video screen. The customer must ensure that both electrical and data wiring installation have been carried out in the indoor hall before MONDO technicians start the videoscreen installation on site. MONDO would previously provide all the necessary information to the customer to carry it out. Fixing and anchors element installation. Elevation engine installation (if needed).
After controlling all these stages, the video screen is installed and a training course is carried out for the staff members who will manage the video screen in the future.
ELEVATION ENGINES An engine system can accurately raise and lower the video screen and place it at the customer s desired height. With this system versatility is much greater, allowing to hold those events in which the video screen must be at the highest position possible (like freestyle, motocross, concerts, circuses, etc.). It also facilitates maintenance and technical revisions. MONDO develops customized elevation control software in accordance with the installation needs. Depending on the complexity of the system needed, several devices can be installed to allow control of the exact position of the video screen and the load supported by each engine in that specific position. The lift system includes all the necessary engine safety elements. MAINTENANCE AND AFTER SALES MONDO offers the possibility to sign a service agreement that includes periodic revisions for preventive maintenance and any corrective actions that could be needed. There are several options in the maintenance agreement regarding issues such as the number of years it s applicable, amount of regular maintenance visits needed, minimum response time, etc. The video screen repair, if needed, will be done onsite by MONDO technicians. Mondo will provide customer service and technical support by phone to answer the questions that may arise in equipment operation or maintenance after the installation and the training. MONDO also provides remote support service, through which MONDO could remotely have access to the video screen control computer, so that any problem caused by a wrong device configuration can be resolved as quickly as possible.
CERTIFICATIONS MONDO VIDEOSCREENS can be used as FIBA level 1 scoreboards when displayed with MONDOVIDEO SYSTEM:
COMPLEMENTS (for sport scoreboard use) PRODUCT DESCRIPTION MONDOVIDEO system REFERENCE ME0080 Apart from the MONDOVIDEO System, the following complements are specifically needed in basketball competitions: PRODUCT DESCRIPTION One unit of luminous led frame for one basketball board Set of two four-sided possession+game time scoreboards, cable communication Set of two four sided possession+game time scoreboards, radiofrequency communication Set of two possession+game time scoreboards, cable communication Set of two possession+game time scoreboards, radiofrequency communication One unit of autonomous horn (normally two are needed) REFERENCE MEPK8600 MMF4TIC MMF4TIR MMFTIC MMFTIR ME0120 ACCESSORIES (for sport scoreboard use) PRODUCT DESCRIPTION Statistics interface Team changing room timer REFERENCE ME0110 ME0025 GUARANTEE Mondo provides a guarantee of 2 years on the supplied product in accordance with Mondo standard text. (*) Further information in http://www.youtube.com/watch?v=dywpq4g-qvg