Product Features: -100 Gigabit Ethernet (100GbE) 100GBASE-LR4 & ITU-T G.959.1 4I1-9D1F Dual Rate Transceiver -103.125 & 111.810 Gbit/s Dual Rate Capability -Compliant to IEEE 802.3ba 100GBASE-LR4 [1] and ITU-T G.959.1 4I1-9D1F -25.78125 Gbit/s x 4 (CAUI-4) & 27.9525 Gbit/s channel Electrical Interface (CEI-28G-VSR) -Transmission length up to 10km -Compliant to QSFP+ 28Gb/s 4X Pluggable Transceiver Specifications (SFF-8665) -Optical light source: 4 channel x 1310 nm cooled EA-DFB LD -Optical receiver: 4 channel x PIN photo detector -Low power consumption: 4.5 W max -Operating case temperature: 0 to 70 deg C -Compact size: 18.4mm x 72 (122) mm x 8.5 mm -Hot Z-Pluggable to 38-pin electrical connector -Latching mechanism: Pull tab -Two-wire common management interface (SFF-8636) -RoHS6 compliant General Product Description: Precision Optical Transceivers PRE-QSFP28M-LR4 transceiver module enables a dense-port and high-throughput solution with its compact size and low power consumption. The PRE-QSFP28M-LR4 modules can be used in various network applications, such as Internet Protocol switches and routers applications. The maximum transmission length of PRE- QSFP28M-LR4 is 10km. PRE-QSFP28M-LR4 is a fully integrated 4 x 25Gbit/s optica; transceiver module that consists of 1310 nm wavelength EA-DFB LDs, Driver ICs, PIN photo-diodes, and clock and data recovery (CDR) ICs with 25 Gbit/s electrical interfaces. Mechanical dimensions, connectors and footprints of PRE-QSFP28M-LR4 conform to QSFP28 SFF specifications. The module size is 18.4 mm x 72 (122) mm x 8.5 mm and is hot pluggable in Z-direction by 38-pin connector. The maximum power consumption is 4.5 W and its power supply voltage is +3.3 V.
Recommended Operating Conditions Absolute Maximum Ratings Parameter Symbol Min Max Unit Supply Voltage V CC 0 +3.6 V Storage Temperature - -40 85 C Optical Receiver Input - - +5.5 dbm Recommended Operating Conditions Supply Voltage V CC 3.135 3.3 3.465 V Supply Voltage Noise Tolerance PSNR - - 66 mv Power Consumption - - - 4.5 W Supply Current - - - 1,435.3 ma Case Temperature TC 0 0 7 C
Channel Data Rate [1] f DC 25.78125 Gbit/s Aggregate Data Rate [1] f D 103.125 Gbit/s Nom- Signal Speed Variation from inal 0) 1) 2) 3) Δf D -100 - +100 ppm λ CT0 1294.53-1296.59 λ CT1 1299.02-1301.09 λ CT2 1303.54-1310.19 λ CT3 1308.09-1310.19 Optical Output Power in OMA [2] OMA -1.3 - +4.5 dbm Average Optical Output Power of Off Optical Characteristics P off - - -30 dbm Optical Waveform [3] - - - - - Extinction Ratio ER 4 - - db Receiver Sensitivity in OMA P minoma -8.6 - +4.5 dbm Stressed Receiver Sensitivity in OMA [3] P minsoma - - -6.8 dbm Receive Power, Each Lane in OMA - - - +4.5 dbm Notes: 1. Data Rate; NRZ, Mark Ratio 50%, PRBS=2 31-1, 1x10-12 BER unless otherwise specified. 2. OMA=10log 10 [2P{A-1)/(A+1)}], A = 10 (ER/10), P = 10 (Pf/10) 3. Stressed Receiver Sensitivity measurement method is under study. Optical Characteristics Receiver Channel Data Rate [1] f DC 27.952493392 Gbit/s Supply Voltage Noise Tolerance PSNR - - 66 mv Aggregate Data Rate [1] f D 111.809973568 Gbit/s Signal Speed Variation from Nominal Δf D -20 - +20 ppm Center Frequency (Lane 3) - 228.816 229 229.184 Center Frequency (Lane 2) - 229.616 229.8 229.984 Center Frequency (Lane 1) - 230.416 230.6 230.784 Center Frequency (Lane 0) - 231.216 231.4 231.584 Average Optical Power Per Lane - 0.6 - +4.0 dbm nm THz
Average Optical Power Total Lane - - - +10.0 dbm Channel Power Difference - - - 5 db Average Optical Output Power of Off P off - - -30 dbm Optical Waveform [1] - - - - - Extinction Ratio ER 4 - - db Mean Channel Input Power - -6.9/-8.8 - +4/+2.9 dbm Mean Total Input Power [1] - - - +10/+8.9 dbm Channel Power Difference - - - 5.5 db Optical Path Penalty - - - 1.5 db Equivalent Sensitivity [2] [3] - -8.4/-10.3 - - dbm Receiver Reflectance Per Lane - - - -26 db Notes: 1. Data Rate, NRZ, Mark Ratio 50% PRBS=2 31-1 2. The Maximum bit error ratio for this application code of 1E-12 is only after error correction has been applied. The BER optical input specified as Minimum equivalent sensitivity can therefore be 1.8E-4 without error connection. 3. Two sets of specifications are defined depending on ER of input optical waveforms, the left set for ER between 4dB and 7dB and the right set for ER of 7dB or higher. Mechanical Dimensions Handling Precautions CAUTION: Take proper electrostatic-discharge (ESD) precautions while handling these devices. These devices are sensititive to ESD. The module meets ESD requirements given in EN6100-4-2, criterion B test specification when installed in a properly grounded case and chassis. The module high speed signal contacts shall withstand 1000 V electrostatic discharge based on human Body model per JEDEC JESD22-A114-b.
Laser Safety This product is complied with IEC 60825-1 as Class 1 and with FDA 21 CFR as Class I laser product. Because of size constraints, laser safety labeling is not affixed to the module but is attached to the outside of the shipping box. Product Ordering Information Part Number PRE-QSFP28M-LR4 Description QSFP28, 1310nm, LR4 Multi-Rate SMF, 10km, 100GBase, DDM, LC