Content. 1.4 Fiber Cable Assembly

Content 1.1 Fiber Optic Cable 1.1.1 Direct Buried 1.1.2 Aerial Duct 1.1.3 Aerial Tube 1.1.4 Aerial 1.1.5 Duct 1.1.6 12 & 24 Singlemode Indoor Breakout 1.1.7 Simplex Singlemode & Multimode 1.1.8 Duplex Singlemode & Multimode 1.1.9 Indoor Distribution 1.2 Fiber Optic Connector, Adapter, Passive Product & Accessories 1.2.1 Connector & Adapter 1.2.2 Coupler 1.2.3 Fix Attenuator 1.2.4 Fiber Hybric Adapter 1.2.5 Fiber Splice Protector Sleeve 1.2.6 Fiber Breakout Kit 1.3 Fiber Management System 1.3.0 Overview 1.3.1 Rack Mount FTDS 1.3.2 Rack Mount FTDC 1.3.3 Rack Mount FTDP 1.3.4 Rack Mount NGFM 1.3.5 Rack Mount RFPF 1.3.6 Rack Mount RFPP 1.3.7 Rack Mount TNB 1.3.8 Wall Mount WFP 1.3.9 Wall Mount WFPE 1.3.10 Wall Mount MFM 1.3.11 Fiber Closure 1.3.11.1 OFC-DR 1.3.11.2 OFC-DS 1.3.11.3 OFC-IB 1.3.11.4 OFC-IM-3 1.3.11.5 OFC-IM3 Re-entry Kit 1.4 Fiber Cable Assembly 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 29 30 31 32 33 35 36 37 38 39 40 41

Content 1.5 Fiber Test Equipment 1.5.1 FLS-100 Stabilized Laser Light Source 1.5.2 VFL-200 Visual Fault Locator 1.5.3 FPM-300 Optical Power Meter 1.5.4 LFT-400 Optical Talk Set 1.5.5 OFI-500 Optical Fiber Identifier 1.6 Fiber Converter 1.6.1 SM Fiber To Ethernet Converter 1.6.2 MM Fiber To Ethernet Converter 1.6.3 Multimode to Singlemode 1.6.4 Gigabit To Ethernet Converter 1.6.5 Fiber To RS-232/423/485 Converter 1.6.6 E1/T1, Datacom & Ethernet Multiplxer 1.6.7 Single E1/T1 To Fiber Converter 1.7 OPGW & ADSS ACCESSORIES 1.7.1 Overview 1.7.2 OPGW Closure 3 4 5 6 7 10 11 12 13 14 15 16 17 18

1.1.1 Direct Buried 1.1.2 Aerial Duct 1.1.3 Armoured Duct 1.1.4 Aerial Centre Tube 1.1.5 Aerial 1.1.6 Duct 1.1.7 12 & 24 Singlemode Indoor Breakout 1.1.8 Simplex Singlemode & Multimode 1.1.9 Duplex Singlemode & Multimode 1.1.10 Indoor Distribution 1.1.11 Drop Cable Fiber Optic Cable

Optical Fiber Cables Simplex Assembly Cable Duplex Assembly Cable Indoor Distribution Cable LTOC-CB-XX-03 LTOC-CB-XX-04 LTOC-CB-XX05-YY Indoor Breakout Cable Outdoor All Dielectric Stranded Tubes Cable Outdoor Aerial Stranded Tubes Cable LTOC-CB-XX06-YY LTOC-CB-XX07-YY LTOC-CB-XX10-YY Outdoor Armoured Stranded Tubes Cable Outdoor All Dielectric Central Tubes Cable Outdoor Armoured Central Tubes Cable LTOC-CB-XX08-YY LTOC-CB-XX07C-YY LTOC-CB-XX08C-YY

Optical Fiber Cable Direct Buried ::: Cross Section Diagram ::: Fiber and Jelly Loose Tube Structure and Material Specification Center Strength Material Steel Wire Member Diameter 2.3mm Loose Tube Wrap Tape Material Material PBT Water Proof Tape Out Dia Thickness 2.2mm 0.2 mm Material AL/PE Tape Armoured (1) Tape 0.15mm Thickness Each Side PE 0.05mm Inner Sheath Material PE Thickness 1.0mm Armoured (2) Material PE Coated Corrugated Thickness Steel Tape 0.15mm Each Side PE 0.05mm Outer Sheath Material PE Thickness 2.0 mm Mechanical / Electrical / Environment Characteristics Item Parameter Short Term 3000N Tensile Long Term 1000N Short Term 3000N/10cm Crush Long Term 1000N/10cm Bending Radius Other Mechanical Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Temperature Installing Installed CSM Cable Core Jelly Armouring (1) Inner Sheath Armouring (2) Outer Sheath 30* Cable Diameter 10* Cable Diameter Correspond To IEC Publication 2000M after 24 hours water immersion Correspond To IEC794-1-F5 + 70, No jelly will be flooded -40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.655 G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field μm noncircularity <=0.5 <=0.5 <=0.5 Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding μm <=12 concentricity Core / cladding concentricity μm <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture Curl μm m 245±5 >=4 Ordering Information Central Strength Member Loose Tube Fillers Inner Outer Cable Weight Type Fiber Count Sheath Sheath Steel Wire Dia. /mm No. Dia. /mm No Thickness Thickness kg/km outer Dia. LTOC-CB-DB-4xxx 4 2.3 2.2 1.0 2.2 5 1.0 2.0 15.5 250 LTOC-CB-DB -6xxx 6 2.3 2.2 1.0 2.2 5 1.0 2.0 15.5 250 LTOC-CB-DB -8xxx 8 2.3 2.2 1.0 2.2 5 1.0 2.0 15.5 250 LTOC-CB-DB -12xxx 12 2.3 2.2 2.0 2.2 4 1.0 2.0 15.5 251 LTOC-CB-DB -16xxx 16 2.3 2.2 2.0 2.2 4 1.0 2.0 15.5 252 LTOC-CB-DB -18xxx 18 2.3 2.2 3.0 2.2 3 1.0 2.0 15.5 253 LTOC-CB-DB -24xxx 24 2.3 2.2 3.0 2.2 3 1.0 2.0 15.5 253 *Specification subject to change without prior notice

Optical Fiber Cable Aerial ::: Cross Section Diagram ::: Structure and Material Specification Message Wire Material Spec Loose Tube Material Out Dia Wrap Tape Material Thickness Armoured Outer Sheath Message Wire Neck Cable Strength Loose Tube Fiber Wrap Tape Central Strength Mechanical / Electrical / Environment Characteristics Item Parameter Short Term 1500N Tensile Long Term 600N Short Term 1000N Crush Long Term 300N Bending Radius Other Mechanical Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Temperature Material Thickness Material Installing Installed Steel Wire 1.4 x 7 PBT 1.9 Water Blocking Tape 0.2 mm Correspond To IEC Publication 2000M after 24 hours water immersion Correspond To IEC794-1-F5 PE Coated Corrugated Tape Steel Steel Tape 0.15 Each Side PE 0.15 PE + 70, No jelly will be flooded 30* Cable Diameter 10* Cable Diameter -40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.655 G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field μm noncircularity <=0.5 <=0.5 <=0.5 Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding μm <=12 concentricity Core / cladding concentricity μm <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture Curl μm m 245±5 >=4 Ordering Information Type Fiber Count Message Wire Steel Wire PE Sheath Dia. Central Strength Member Steel Wire Dia. Loose Tube Dia. /mm No. Dia. /mm No. Sheath Cable Weight Thickness mm LTOC-CB-A-4xxx 4 1.4 x 7 1.2 2.0 1.9 1 1.9 5 2.0 11.2 248 LTOC-CB-A-6xxx 6 1.4 x 7 1.2 2.0 1.9 1 1.9 5 2.0 11.2 248 LTOC-CB-A-8xxx 8 1.4 x 7 1.2 2.0 1.9 2 1.9 4 2.0 11.2 249 LTOC-CB-A-12xxx 12 1.4 x 7 1.2 2.0 1.9 2 1.9 4 2.0 11.2 249 LTOC-CB-A-16xxx 16 1.4 x 7 1.2 2.0 1.9 3 1.9 3 2.0 11.2 250 LTOC-CB-A-18xxx 18 1.4 x 7 1.2 2.0 1.9 3 1.9 3 2.0 11.2 250 LTOC-CB-A-24xxx 24 1.4 x 7 1.2 2.0 1.9 4 1.9 2 2.0 11.2 252 Fillers Outer Dia. kg/km *Specification subject to change without prior notice

Optical Fiber Cable Aerial Center Tube ::: Cross Section Diagram ::: Message Wire Neck Cable Sheath Armour Loose Tube Wrap Tube Fiber Structure and Material Specification Message Wire Loose Tube Material Material Steel Wire PBT Spec Out Dia 1.4 x 7 Refer table below Material Water Proof Tape Wrap Tape Thickness 0.2 mm Armoured Material PE Coated Corrugated Steel Tape Thickness Steel Tape 0.15 Each Side PE 0.15 Outer Sheath Material PE Mechanical / Electrical / Environment Characteristics Tensile Crush Item Bending Radius Other Mechanical Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Temperature Parameter Short Term Long Term Short Term Long Term 3500N 1500N Correspond To IEC Publication 2000M after 24 hours water immersion + 70, No jelly will be flooded 1000N/10cm 300N/10cm Installing 30* Cable Diameter Installed 10* Cable Diameter Correspond To IEC794-1-F5-40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm m 9.2±0.4 9.2±0.4 1550 nm m 10.4±0.8 10.4±0.8 9.2~10.0 Mode field m <=0.5 <=0.5 <=0.5 noncircularity Core diameter m 50±2 62.5±2 Cladding diameter m <=125±1.0 <=125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding m concentricity <=12 Core / cladding concentricity m <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture m 245±5 Curl m >=4 Message Wire Loose Tube Sheath Cable Type Fiber Count Outer Steel Wire PE Sheath Dia. Dia. /mm Thickness (mm) Dia./mm Kg/km LTOC-CB-ACT-4xxx 4 1.4X7 1.2 3.0 2.0 9.2 264 LTOC-CB-ACT-6xxx 6 1.4X7 1.2 3.0 2.0 9.2 264 LTOC-CB-ACT-8xxx 8 1.4X7 1.2 3.0 2.0 9.2 264 LTOC-CB-ACT-12xxx 12 1.4X7 1.2 3.0 2.0 9.2 264 LTOC-CB-ACT-16xxx 16 1.4X7 1.2 4.2 2.0 10.4 297 LTOC-CB-ACT-18xxx 18 1.4X7 1.2 4.2 2.0 10.4 298 LTOC-CB-ACT-24xxx 24 1.4X7 1.2 4.2 2.0 10.4 298 *Specification subject to change without prior notice

Optical Fiber Cable Armoured Duct ::: Cross Section Diagram ::: Structure and Material Specification Central Strength Member Loose Tube Wrap Tape Armoured Material Diameter Material Out Dia Material Thickness Material Fiber and Jelly Loose Tube Wrap Tube Inner Sheath CSM Cable Core Jelly Outer Sheath Steel Wire 2.0mm PBT Refer table below Water Proof Tape 0.2 mm AL/PE Laminated Tape Armoured & HDPE Outer Sheath Material PE Outer Sheath Thickness 2.0mm Mechanical / Electrical / Environment Characteristics Item Parameter Tensile Short Term 1500N Long Term 600N Crush Short Term 1000N/10cm Long Term 300N/10cm Bending Radius Other Mechanical Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Temperature Installing Installed 30* Cable Diameter 10* Cable Diameter Correspond To IEC Publication 2000M after 24 hours water immersion Correspond To IEC794-1-F5 + 70, No jelly will be flooded -40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.655 G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field μm noncircularity <=0.5 <=0.5 <=0.5 Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding μm <=12 concentricity Core / cladding concentricity μm <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture Curl μm m 245±5 >=4 Ordering Information Central Strength Sheath Loose Tube Type Fiber Count Member Fillers Thickness Cable Steel Wire Dia. Dia/mm No Dia/mm No mm Outer Dia. kg/km LTOC-CB-AD -4xxx 4 2.0 1.9 1.0 1.9 5.0 2.0 11.2 117 LTOC-CB-AD -6xxx 6 2.0 1.9 1.0 1.9 5.0 2.0 11.2 117 LTOC-CB-AD -8xxx 8 2.0 1.9 2.0 1.9 4.0 2.0 11.2 118 LTOC-CB-AD -12xxx 12 2.0 1.9 2.0 1.9 4.0 2.0 11.2 118 LTOC-CB-AD -16xxx 16 2.0 1.9 3.0 1.9 3.0 2.0 11.2 119 LTOC-CB-AD -18xxx 18 2.0 1.9 3.0 1.9 3.0 2.0 11.2 119 LTOC-CB-AD -24xxx 24 2.0 1.9 4.0 1.9 2.0 2.0 11.2 121 LTOC-CB-AD -36xxx 36 2.0 1.9 6.0 - - 2.0 11.2 123 LTOC-CB-AD -48xxx 48 2.3 2.2 6.0 - - 2.0 12.2 149 LTOC-CB-AD -96xxx 96 2.5 2.4 8.0 - - 2.0 14.2 195 *Specification subject to change without prior notice

Optical Fiber Cable Duct ::: Cross Section Diagram ::: Structure and Material Specification Center Strength Material FRP Member Spec 3.0mm Loose Tube Material PBTP Out Dia 2.2mm Thickness 0.2 mm Armoured Material Kevlar Outer Sheath Material PE Fiber and Jelly Loose Tube Wrap Tube CSM Thickness Minimum 2.0 Mechanical / Electrical / Environment Characteristics Item Parameter Tensile Short Term 1500N Outer Sheath Long Term 600N Crush Short Term 1000N/10cm Long Term 300N/10cm Bending Radius Installing 30* Cable Diameter Installed 10* Cable Diameter Other Mechanical Correspond To IEC Publication Characteristics Insulating Resistance of Sheath Water Penetration 2000M after 24 hours water immersion Correspond To IEC794-1-F5 Moisture Resistant + 70, No jelly will be flooded Jelly Temperature -40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.5 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit Mode field diameter at wavelength G.652 G.652-C G.655 G.651 G.651 1310 nm m 9.2±0.4 9.2±0.4 50/125 62.5/125 1550 nm m 10.4±0.8 10.4±0.8 9.2~10.0 Mode field m <=0.5 <=0.5 <=0.5 noncircularity Core diameter m 50±2 62.5±2 Cladding diameter m 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding concentricity m <=12 Core / cladding concentricity m <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture m 245±5 Curl m >=4 Ordering Information Central Strength Type Fiber Count Member Loose Tube Fillers Sheath Cable Weight FRP Dia. Dia. /mm No. Dia. /mm No. Thickness (mm) outer Dia. kg/km LTOC-CB-D-4xxx 4 3.0 2.2 1.0 2.2 6 2.0 11.8 111 LTOC-CB-D-6xxx 6 3.0 2.2 1.0 2.2 6 2.0 11.8 111 LTOC-CB-D-8xxx 8 3.0 2.2 2.0 2.2 5 2.0 11.8 112 LTOC-CB-D-12xxx 12 3.0 2.2 2.0 2.2 5 2.0 11.8 112 LTOC-CB-D-16xxx 16 3.0 2.2 3.0 2.2 4 2.0 11.8 113 LTOC-CB-D-18xxx 18 3.0 2.2 3.0 2.2 4 2.0 11.8 113 LTOC-CB-D-24xxx 24 3.0 2.2 4.0 2.2 3 2.0 11.8 115 *Specification subject to change without prior notice

Optical Fiber Cable 12 & 24 Singlemode Inddor Breakout ::: Cross Section Diagram ::: up to 12 cords, on a single layer stranding > 12 and up to 24 cords or two layer stranding Transmission Parameters Of Fibres Parameter Unit Attenuation 850 nm 1310 nm 1383 nm db/km 1550 nm 1625 nm Chromatic dispersion 1288~1339 nm 1550 nm ps/nm km 1530~1565 nm 1565~1625 nm Bandwidth 850 nm MHz km 1300 nm PMD individual fibre ps/km1 /2 link value Cut off wavelength (in cable) nm Singlemode Fibre G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 3.0 3.5 <=0.36 <=0.36 1.0 1.5 <=2.1 <=0.36 <= 2.1 <=0.22 <=0.22 <=0.22 <=0.25 <=0.25 <=3.5 <=3.5 <=18 <=18 <=0.2 <=0.2 <=0.1 <=0.1 <=0.1 <=0.04 <=1260 <=1260 <=1480 Multimode Fibre 1.0 to 6.0 4.5 to 11.2 \ >=200 >=160 >=500 >=500 Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit G.651 G.651 G.652 G.652-C G.655 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field noncircularity μm <=0.5 <=0.5 <=0.5 Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding concentricity μm <=12 Core / cladding concentricity μm <=0.5 <=3.0 Primary coating % <=1.0 <=2.0 diameter Numerical aperture Curl μm m 245±5 >=4 Structured and Material Specification Core Diameter 4 6 8 10 12 16 18 20 24 Cable Diameter ( mm ) 7.7 9.1 11.7 13.1 Cable Mass ( kg /km ) 44 47 66 106 109 113 143 150 Max. Tensile - Loaded ( N ) - Unloaded 500 275 700 400 1000 600 1400 800 Min Bending Radius - Loaded - Unloaded 150 75 180 90 200 100 250 250 Grush Resistance Flex Resistance ( Cycles ) Fire Resistance 200N/10cm Greater than 2000 Cycles Compiles with UL 1666 and IEC 332 Parts 1 and 3C ::: Ordering Information ::: Part Number LTOC-CB-SM06-12 LTOC-CB-SM06-24 Description Fiber Cable Breakout SM12 Core Fiber Cable Breakout SM24 Core *Specification subject to change without prior notice

Optical Fiber Cable Simplex Singlemode & Multimode ::: Cross Section Diagram ::: Outer Sheath Peripheral Strength Tight Buffer Singlemode Optical Fiber Multimode Transmission Parameters Of Fibres Parameter Unit Attenuation 850 nm 1310 nm 1383 nm db/km 1550 nm 1625 nm Chromatic dispersion 1288~1339 nm 1550 nm ps/nm km 1530~1565 nm 1565~1625 nm Bandwidth 850 nm MHz km 1300 nm PMD individual fibre ps/km1 /2 link value Cut off wavelength (in cable) nm Singlemode Fibre G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 3.0 3.5 <=0.36 <=0.36 1.0 1.5 <=2.1 <=0.36 <= 2.1 <=0.22 <=0.22 <=0.22 <=0.25 <=0.25 <=3.5 <=3.5 <=18 <=18 <=0.2 <=0.2 <=0.1 <=0.1 <=0.1 <=0.04 <=1260 <=1260 <=1480 Multimode Fibre 1.0 to 6.0 4.5 to 11.2 \ >=200 >=160 >=500 >=500 Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit G.651 G.651 G.652 G.652-C G.655 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field noncircularity μm <=0.5 <=0.5 <=0.5 Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding concentricity μm <=12 Core / cladding concentricity μm <=0.5 <=3.0 Primary coating % <=1.0 <=2.0 diameter Numerical aperture Curl μm m 245±5 >=4 Material Specification And Construction Parameter Value Tigh Buffer Material PVC/Nylon Installation Diameter 0.9 ± 0.1 mm Maximum Pulling Load * 500 N Material Aramid Yarn Maximum Operating Load * 200 N Peripheral Strength Member Assembly Longitudinally Crush Resistance (between parallel plates) 400 N/cm Outer Sheath Material * PVC Impact Resistance 20 times @ 1.5 Nm Thickness 0.5 ± 0.15 mm Minimum Bending Radius Cable Diameter (Nominal) 3.0 ± 0.2 mm - During Installation 15 x Outer Diameter Cable Weight (Nominal) < 10 kg/km - Installed 10 x Outer Diameter Temperature Range - Storage on Reel -40ºC ~ +70ºC - Operating -20ºC ~ +70ºC ::: Ordering Information ::: Part Number LTOC-CB-SM-03 LTOC-CB-MF-03 LTOC-CB-MM-03 Description Fiber Cable Assembly SM Simplex 3.0mm Fiber Cable Assembly MM 50um Simplex 3.0mm Fiber Cable Assembly MM 62.5um Simplex 3.0mm *Specification subject to change without prior notice

Optical Fiber Cable Duplex Singlemode & Multimode ::: Cross Section Diagram ::: Outer Sheath Peripheral Strength Tight Buffer Optical Fiber Singlemode Multimode Material Specification And Construction Parameter Value Tight Buffer Material PVC/Nylon Installation Diameter 0.9 ± 0.1 mm Maximum Pulling Load * 300 N Material Aramid Yarn Maximum Operating Load * 60 N Peripheral Strength Member Crush Resistance (between Assembly Longitudinally parallel plates) 400 N/cm Outer Sheath Material * PVC Impact Resistance 20 times @ 1.5 Nm Thickness 0.5 ± 0.15 mm Minimum Bending Radius Cable Diameter (Nominal) 5.8 ± 0.2 mm - During Installation 15 x Outer Diameter Cable Weight (Nominal) < 20 kg/km - Installed 10 x Outer Diameter Temperature Range - Storage on Reel -40ºC ~ +70ºC - Operating -20ºC ~ +70ºC Parameter Type Of Fiber Fiber Core Fiber Cladding Core Diameter Cladding Diameter Numerical Aperture Average Attenuation Maximum Attenuation Bandwidth Value 9/125 um 50/125 um 62.5/125 um GeCI 4 (Germanium Tetrachloride ) + SiCI4 (Silica Tetrachloride) SiCI 4 (Silica Tetrachloride) 8 ± 1.0 um 50 ± 3.0 um 62.5 ± 3.0 um 125 ± 2 um 125 ± 2 um 125 ± 2 um 0.12 ± 0.01 0.20 ± 0.015 0.275 ± 0.015 1310 nm : <= 0.36 db/km 1550 nm : <= 0.25 db/km 1310 nm : <= 0.45 db/km 1550 nm : <= 0.35 db/km 850 nm : <= 3.0 db/km 1300 nm : <= 1.0 db/km 850 nm : <= 3.5 db/km 1300 nm : <= 1.2 db/km Not Applicable 850 nm : >= 300 MHz/km 850 nm : >= 150 MHz/km 1300 nm : >= 600MHz/km 1300 nm : >= 400MHz/km ::: Ordering Information ::: Part Number LTOC-CB-SM-04 LTOC-CB-MF-04 LTOC-CB-MM-04 Description Fiber Cable Assembly SM Duplex 3.0mm Fiber Cable Assembly MM 50um Duplex 3.0mm Fiber Cable Assembly MM 62.5um Duplex 3.0mm *Specification subject to change without prior notice

Optical Fiber Cable Armoured Central Loose Tube ::: Cross Section Diagram ::: Cable Sheath Armour Loose Tube Wrap Tube Fiber Strength member Structure and Material Specification Material Steel Wire Strength member Spec 1.4mm Material PBT Loose Tube Out Dia Refer table below Material Water Proof Tape Wrap Tape Thickness 0.2 mm Material PE Coated Corrugated Steel Armoured Tape Thickness Steel Tape 0.15 Each Side PE 0.15 Transmission Parameters Of Fibres Parameter Attenuation 850 nm 1310 nm 1383 nm 1550 nm 1625 nm Chromatic dispersion 1288~1339 nm 1550 nm 1530~1565 nm 1565~1625 nm Bandwidth 850 nm 1300 nm PMD individual fibre link value Cut off wavelength (in cable) Unit db/km ps/nm km Singlemode Fibre G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 3.0 3.5 <=0.36 <=0.36 1.0 1.5 <=2.1 <=0.36 <=2.1 <=0.22 <=0.22 <=0.22 <=0.25 <=0.25 <=3.5 <=3.5 <=18 <=18 1.0 to 6.0 4.5 to 11.2 \ MHz km >=200 >=160 >=500 >=500 ps/km1 /2 <=0.2 <=0.2 <=0.1 <=0.1 <=0.1 <=0.04 nm <=1260 <=1260 <=1480 Multimode Fibre Geometrical Parameters Of Fibres Outer Sheath Material PE Singelmode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 Mechanical / Electrical / Environment Characteristics Item Parameter Mode field diameter at wavelength 50/125 62.5/125 Tensile Short Term 1500N 1310 nm m 9.2±0.4 9.2±0.4 Long Term 600N 1550 nm m 10.4±0.8 10.4±0.8 9.2~10.0 Crush Short Term 1000N/10cm Mode field m <=0.5 <=0.5 <=0.5 Long Term 300N/10cm noncircularity Installing 30* Cable Diameter Bending Radius Core diameter m 50±2 62.5±2 Installed 10* Cable Diameter Cladding diameter m <=125±1.0 <=125±2.0 Spark Voltage of 15kv DC for 2 minutes after 24 hours water immersion Cladding ellipticity % <=1 <=2 Sheath Insulating Resistance 2000M after 24 hours water Coating / cladding m of Sheath immersion concentricity <=12 Water Penetration Correspond To IEC794-3 Core / cladding m <=0.5 <=3.0 concentricity Moisture Resistant + 70 C, No jelly will be flooded Primary coating Jelly % <=1.0 <=2.0 diameter Storage : -20 C ~ +60 C Temperature Numerical aperture m 245±5 Operation : -5 C ~ +40 C Operation : -20 C ~ +60 C Curl m >=4 Loose Tube Steel Wire Sheath Type Fiber Count Outer Dia. /mm Dia. /mm Thickness (mm) Kg/km Dia./mm LTOC-CB-CT-4xxx 4 3.0 1.4 3.0 10.8 137 LTOC-CB-CT-6xxx 6 3.0 1.4 2.0 10.8 137 LTOC-CB-CT-8xxx 8 3.0 1.4 2.0 10.8 137 LTOC-CB-CT-12xxx 12 3.0 1.4 2.0 10.8 137 Cable *Specification subject to change without prior notice

Optical Fiber Cable Indoor Distribution ::: Cross Section Diagram ::: Ordering Information Singlemode Multimode Structure and Material Specification Fiber Tight Buffer Kevlar Outer Sheath Fiber Tight Buffer Kevlar Outer Sheath Tight Buffered Fibre Diameter 0.9mm Armoured Layer Material KEVLAR Sheath Material PVC Thickness 1.0mm Mechanical / Electrical / Environment Characteristics Item Parameter Tensile Short Term 600N Long Term 450N Crush 200N/10cm Bending Radius Installing 30* Cable Diameter Installed 10* Cable Diameter Other Mechanical Correspond to IEC Publication Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Temperature 2000M after 24 hours water immersion Correspond To IEC 794-1-F5 + 70, No jelly will be flooded -40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <= 2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm >=200 >=160 MHz km 1300 nm >=500 >=500 PMD individual fibre <=0.2 <=0.2 <=0.1 ps/km1 /2 link desin value <=0.1 <=0.1 <=0.04 Cut off wavelength (in cable) nm <=1260 <=1260 <=1480 Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm μm 9.2±0.4 9.2±0.4 1550 nm μm 10.4±0.8 10.4±0.8 9.2~10.0 Mode field μm <=0.5 <=0.5 <=0.5 noncircularity Core diameter μm 50±2 62.5±2 Cladding diameter μm 125±1.0 125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding μm concentricity <=12 Core / cladding concentricity μm <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture Curl μm m 245±5 >=4 Outer Sheath Cable Max. Tension Force Type Fiber Count Material Thickness (mm) Outer Dia. (mm) Weight (kg/km) Short Term Long Term LTOC-CB-4XXX 4 PVC 1.0 4.6 17.0 400 200 LTOC-CB-6XXX 6 PVC 1.0 5.0 22.0 500 300 LTOC-CB-8XXX 8 PVC 1.0 5.5 23.0 500 300 LTOC-CB-10XXX 10 PVC 1.0 5.8 25.0 600 400 LTOC-CB-12XXX 12 PVC 1.0 6.1 29.0 600 400 *Specification subject to change without prior notice

Optical Fiber Cable Drop Cable ::: Cross Section Diagram ::: Structure and Material Specification Loose Tube Strengthen Layer Material Material Outer Sheath Material PE Tensile Crush Bending Radius Temperature PBT or PC Aramid Yarns Mechanical / Electrical / Environment Characteristics Item Other Mechanical Characteristics Insulating Resistance of Sheath Water Penetration Moisture Resistant Jelly Parameter Short Term Long Term Short Term Long Term Fiber & Jelly Loose Tube Strength Member Outer Sheath 300N 100N Correspond To IEC Publication 2000M after 24 hours water immersion + 70, No jelly will be flooded 1000N/10cm 200N/10cm Installing 30* Cable Diameter Installed 10* Cable Diameter Correspond To IEC794-1-F5-40~+70 Additional dispersion 0.05dB/km Transmission Parameters Of Fibres Singlemode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Attenuation 850 nm 3.0 3.5 1310 nm <=0.36 <=0.36 1.0 1.5 1383 nm db/km <=2.1 <=0.36 <=2.1 1550 nm <=0.22 <=0.22 <=0.22 1625 nm <=0.25 <=0.25 Chromatic dispersion 1288~1339 nm <=3.5 <=3.5 1550 nm <=18 <=18 ps/nm km 1530~1565 nm 1.0 to 6.0 1565~1625 nm 4.5 to 11.2 \ Bandwidth 850 nm MHz km >=200 >=160 1300 nm >=500 >=500 PMD individual fibre ps/km1 /2 <=0.2 <=0.2 <=0.1 link value <=0.1 <=0.1 <=0.04 Cut off wavelength nm <=1260 <=1260 <=1480 (in cable) Geometrical Parameters Of Fibres Singelmode Fibre Multimode Fibre Parameter Unit G.652 G.652-C G.655 G.651 G.651 50/125 62.5/125 Mode field diameter at wavelength 1310 nm m 9.2±0.4 9.2±0.4 1550 nm m 10.4±0.8 10.4±0.8 9.2~10.0 Mode field m <=0.5 <=0.5 <=0.5 noncircularity Core diameter m 50±2 62.5±2 Cladding diameter m <=125±1.0 <=125±2.0 Cladding ellipticity % <=1 <=2 Coating / cladding m concentricity <=12 Core / cladding concentricity m <=0.5 <=3.0 Primary coating diameter % <=1.0 <=2.0 Numerical aperture m 245±5 Curl m >=4 Type Fiber Count Short Term (N) Max Tension Force Long Term (N) Short Term (N) Max Crush Long Term (N) Outer Dia./mm LTOC-CB-DRC-02 2 300 100 1000 200 3.5 15 LTOC-CB-DRC-04 4 300 100 1000 200 3.5 15 LTOC-CB-DRC-06 6 300 100 1000 200 3.5 15 LTOC-CB-DRC-08 8 300 100 1000 200 3.5 16 LTOC-CB-DRC-10 10 300 100 1000 200 3.5 16 LTOC-CB-DRC-12 12 300 100 1000 200 3.5 16 LTOC-CB-DRC-(14-24) 14-24 300 100 1000 200 4.0 18 Cable Weight Kg/km *Specification subject to change without prior notice

Fiber Optic Connector, Adapter, Passive Product & Accessories 1.2.1 Connector & Adapter 1.2.2 Coupler 1.2.3 Fix Attenuator 1.2.4 Fiber Hybric Adapter 1.2.5 Fiber Splice Protector Sleeve 1.2.6 Fiber Breakout Kit 1.2.7 Polarization Independent Circulator

Fiber Optic Connectors, Adapters & Accessories Fiber Optic Connector SC E-2000 FC SMA ST MU LC MTRJ DIN D4 Fiber Optic Adapter SC E-2000 FC SMA ST MU LC MTRJ DIN Hybrid Adapter Bare Fiber Adapter ST-SMA ST-SC FC-ST FC-SC E-2000-FC FC-Din SMA FC ST Fixed Attenuator Head Shrink Protection Sleeve SC FC LC Ribbon Single Optical Coupler / Splitter Optical Circulator 1x2 1x4

Fiber Optic Connector & Adapter ::: Specification - Connector ::: Type Singlemode Multimode Insertion Loss 0.3 db 0.3 db Back Reflection -50 db -22 db Operating Temperature -40ºC to +85ºC -40ºC to +85ºC ::: Specification - Adapter ::: Value Characteristics Conditions Min Typ Max Insertion Loss (db) 0.15 0.40 Durability (db) 1,000 matings 0.20 Operating Temperature (db) -40ºC~80ºC 0.20 Humidity Cycling (db) 75ºC, RH 95% 0.20 Vibration (db) 10~55Hz (3 Axis) 0.20 Impact 1.5m drop, 8 cycles 0.20 ::: Ordering Information ::: Connector LTOC - CON - - - SM : Singlemode MM : Multimode 01: 0.9mm 02 : 3.0mm 03 : 2.0mm Connector & Adapter Type D4 : D4 LC : LC DIN : DI ST : ST FC : FC MTRJ : MR FC/APC : FA SMA : MA SC : SC E-2000 : E2 SC/APC : SA E2000/APC : EA FDDI : FD MU : MU Adapter SX : Simplex DX : Duplex C : Ceramic B : Bronze LTOC - ADP - - - - D : Flange S : Square Flange

Coupler ::: Singlemode Wavelength Independent Coupler ::: ::: Features ::: Low excess loss Low insertion loss Available in wide range of coupling ratios Environment Stablity Comply to Bellcore's GR-1221 standards ::: Specification ::: Item Single-mode Dual-Windows Coupler Unit Center Wavelength (nm) 1310 or 1550 Bandwidth (nm) ±40 Coupling Ratio (%) 1 ~ 50 Typical Excess Loss (db) 0.15 Typical Insertion Loss (db) 3.2 PDL (db) 0.10 Min Directivity (db) 60 Temperature ( C) 0.002 Operating Temperature ( C) -40 ~ +70 Storage Temperature ( C) -40 ~ +85 Max Operating Power (mw) 300 Max Tensile Strength (N) 5

Fiber Optic Fixed Attenuator ::: Features ::: Low backreflection High power endurance Precise control of attenuation range Easy installation ::: Aplication ::: Fiber optic telecommunications LAN (Local Area Network) High speed transmissions system Bi-directional system ::: Specification ::: Parameter Premium Operating Wavelength Range Wavelength Independance Attenuation Value 5, 10, 15, 20 db Attenuation Accuracy ± 0.5dB Return Loss > 50dB Operating Temperature -40ºC to ± 80ºC ::: Ordering Information ::: Part Number LTOC-ATT-FC-05/10/15/20 LTOC-ATT-SC-05/10/15/20 LTOC-ATT-LC-05/10/15/20 Description Fiber Attenuator Fixed SM FC 5/10/15/20 db Fiber Attenuator Fixed SM SC 5/10/15/20 db Fiber Attenuator Fixed SM LC 5/10/15/20 db

Fiber Optic Hybrid Adapter ST-SMA Hybrid Adapter E 2000 - FC Hybrid Adapter FC - Din Hybrid Adapter LTOC-ADP-STSMA LTOC-ADP-E2FC LTOC-ADP-FCDI FC-SC Hybrid Adapter ST-SC Hybrid Adapter FC-ST Hybrid Adapter LTOC-ADP-FCSC LTOC-ADP-SCST LTOC-ADP-FCST SMA Bare Adapter FC Bare Adapter ST Bare Adapter LTOC-ADP-SMA-SX-BR LTOC-ADP-FC-SX-BR LTOC-ADP-ST-SX-BR

Fiber Splice Protector Sleeve Litech splice protector sleeves provide mechanical and environment protection for fusion splices of single and ribbon fiber. ::: Advantages ::: Clear outer heatshrink material Low temperature hot melt adhensive to encapsulate the splice Stainless steel rod for single fiber splices and a ceramic rod for ribbon fiber splices to ensure proper alignment and rigidity ::: Specification ::: Specification Outer Tube Clear Heatshrink Material Inner Tube EVA Materials Inner Rod Stainless Steel Shrinking Temperature 90~120 C Radial Shrinking Rate >50% Axial Shrinking Rate < 3% Low Temperature Property No Crack-55 C lasting 4 hours Normal Operation Temperature -40 ~ 65 C Normal Operation Relative Humidity 90% Spack-over-Strength 20 kv/mm Tensile Strength 20 Mpa ::: Ordering Information ::: Part Number LTCV-ACC-HS-40 LTCV-ACC-HS-60 LTCV-ACC-HS-RB Description Splice Protection Sleeve 40mm Splice Protection Sleeve 60mm Splice Protection Sleeve Ribbon

Fiber Breakout Kit Fiber Breakout Kit (Blue - Big) Fiber Breakout Kit (Beige - Medium) LTOC-BOK-B-BLU LTOC-BOK-M-BEI Fiber Breakout Kit (Black - Small) Fiber Tube LTOC-BOK-S-BLK LTOC-BOK-OV-XX Fiber Breakout Kit (Yellow - Big) Fiber Breakout Kit (Yellow - Small) LTOC-BOK-S-YEL-A LTOC-BOK-S-YEL-B

Polarization Independent Circulator ::: Features ::: ::: Applications ::: Extra high isolation Low PDL PMD free Low cross-talk Low insertion loss Environmentally stable Epoxy-free optical path Optical amplifier Optical transmitter CATV Testing instruments Bi-directional transmission systex Dense WDM Add/Drox Multiplexer (ADM) Dispersion compensation ::: Specification ::: Item/Model Type A Type B Wideband (5w) Operating Wavelength,nm 1310 or1550(±20) 1470-1610 Configurations Port1 2 3 Minimum Isolation, db 40(1530-1570nm) 35(1530-1570nm) 35(1470-1490nm) (at 25_C, all SOP) 40(1490-161-nm) Maximum Insertion Loss, db 1.4(1470-1490) (at 0 ~ 60_C, all SOP) 1.3(1490-1500) 0.8(1530-1570nm) 1.0(1530-1570nm) 1.1(1500-1600) 1.4(1600-1610) Polarization dependent Loss, db 0.15 Maximum Optical Power, mw 500 Return Loss, db (input/outpux) 50 Polarization Mode Dispersion, ps 0.1 Operating Temperature, _C 0-60 Storage temperature C 45 Dimension, mm Ø5.5 60 Note: SOP = States of Polarization Optical laser signal through out Port 1 2 3 Completeness Close off Port 2 1,3 2 Transmission

1.3.0 Overview 1.3.1 Rack Mount FTDS 1.3.2 Rack Mount FTDC 1.3.3 Rack Mount FTDP 1.3.4 Rack Mount MFM 1.3.5 Rack Mount NGFM 1.3.6 Rack Mount RFPF 1.3.7 Rack Mount RFPP 1.3.8 Rack Mount TNB 1.3.9 Rack Mount WFP 1.3.10 Rack Mount WFPE 1.3.11 Rack Mount MFM 1.3.12 Fiber Closure 1.3.12.1 OFC-DR 1.3.12.2 OFC-DS 1.3.12.3 OFC-IB 1.3.12.4 OFC-IM3 1.3.12.5 OFC-IM3 Re-entry Kit Fiber Management System

Fiber Management System FTDS Fiber Management System Splice / Patch Module Subrack Slack Cable Module LTOC-FTDS-SPM LTOC-FTDS-SR LTOC-FTDS-CM FTDC Fiber Management System FTDP Fiber Management System Swing Out Patch Module LTOC-FTDC-XU-YP Pull Out Splice Module LTOC-FTDC-XU-YS Pull Out Splice Module LTOC-FTDP-XU-YS Pull Out Patch Module LTOC-FTDP-XU-YP MFM Fiber Management System Pull Out Splice Module LTOC-MFM-XU-YS Swing Out Patch Module LTOC-MFM-XU-YP NGFM Fiber Management System NGFM Splice & Patch Module LTOC-NGFM-XU-Y Fiber Outdoor Cabinet 96 Core Fiber Outdoor Cabinet 288 Core NGFM Fiber Cabinet LTOC-NGFM-OD-96 LTOC-NGFM-OD-288 LTOC-NGFM-CAB

Fiber Management System RFPF Fiber Distribution Panel (Fixed Type) RFPP Fiber Distribution Panel (Pull Out Type) TNB Fiber Distribution Panel (Pull Out Type) LTOC-RFPF-XX-YY LTOC-RFPP-XX-YY LTOC-PN-TNB-XX RFPE Fiber Distribution Panel (Fixed Type) RFPS Fiber Distribution Panel (Pull Out Type) FCP Compact Fiber Panel LTOC-RFPE-XX-YY LTOC-RFPS-XX-YY LTOC-FCP-XX-YY WFP Wall Mount Fiber Distribution Box WFPE Wall Mount Fiber Distribution Box WFPS Wall Mount Fiber Distribution Box LTOC-WFP-XX LTOC-WEPE-XX LTOC-WFPS-XX

Fiber Management System - FTDS ::: Fiber Termination & Distribution System (FTDS) ::: ::: Splice / Patch Module ::: Up to 12 connector per module - FC/PC, E2000/APC, SC/PC, ST/PC Fibre guide are available to ensure the optical fibre bending radius is always greater than 30 mm The module includes splice holder that holds up 12 splice sleeves Strength relief facilities for fibre cable ::: FTDS - Subrack ::: 3U height FTDS Subrack The standards subrack is 19" rack mount type The standards subrack shall be able to accomodate up to 10 splice & patch modules (Total of 120 fibre) Dust cover is available for each subrack (optional) ::: Slack Cable Drawer ::: To store excess patchcord cables Slide-Out designed for easy cable access

Fiber Management System - FTDC ::: FTDC Fiber Distribution Panel ::: ::: Features ::: Removeable front and rear door allow easy access to patch and fiber trays Interchangeable adapter plates accommodate various types of connectors Swing out adpater panel design allow easy access to connector Individual slide out splice organizer trays provide easy access to splices for maintenance Strength member clamp provides strain relief to avoid cable pull-out ::: Specification ::: Material Finish Colour : Aluminium with epoxy coating : High quality oven baked epoxy powdered : Beige ::: Ordering Information ::: Part Number LTOC-FTDC-2U-48S LTOC-FTDC-3U-48P LTOC-FTDC-4U-72P LTOC-FTDC-4U-96S LTOC-FTDC-5U-96P LTOC-FTDC-5U-144S LTOC-FTDC-5U-144P Description Fiber Rack Mount FTDC 2U 48C Splice Fiber Rack Mount FTDC 3U 48C Patch Fiber Rack Mount FTDC 4U 72C Patch Fiber Rack Mount FTDC 4U 96C Splice Fiber Rack Mount FTDC 5U 96C Patch Fiber Rack Mount FTDC 5U 144C Splice Fiber Rack Mount FTDC 5U 144C Patch

Fiber Management System - FTDP ::: FTDP Fiber Distribution Panel ::: FTDP Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required. FTDP features a modular system for fiber splicing and patching with flexible cable management systems. A cost effective and easy installation solutions for fiber optic management system. ::: Features ::: Removeable front and rear door allow easy access to patch and fiber trays Interchangeable adapter plates accommodate various types of connectors Slide out design allow easy access and reduce installation time Flappable splice organizer trays provide easy access to splices for maintenance Strength member clamp provides strain relief to avoid cable pull-out ::: Specification ::: Material Finish Colour : Aluminium with epoxy coating : High quality oven baked epoxy powdered : Beige ::: Ordering Information ::: Part Number Description Dimensions (HxWxD) LTOC-FTDP-12/24 FTDP Splice & Patch FTDP 24 Core 133.4 x 431.8 x 304.8 LTOC-FTDP-48S FTDP Splice FTDP 48 Core 133.4 x 431.8 x 304.8 LTOC-FTDP-48P FTDP Patch FTDP 48 Core 177.8 x 431.8 x 304.8 LTOC-FTDP-72S FTDP Splice FTDP 72 Core 133.4 x 431.8 x 304.8 LTOC-FTDP-72P FTDP Patch FTDP 72 Core 177.8 x 431.8 x 304.8 LTOC-FTDP-96S FTDP Splice FTDP 96 Core 177.8 x 431.8 x 304.8 LTOC-FTDP-96P FTDP Patch FTDP 96 Core 222.2 x 431.8 x 304.8 LTOC-FTDP-144S FTDP Splice FTDP 144 Core 266.7 x 431.8 x 304.8 LTOC-FTDP-144P FTDP Patch FTDP 144 Core 311.1 x 431.8 x 304.8

Fiber Management System - MFM ::: MFM Fiber Distribution Panel ::: MFM Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required. MFM features a modular system for fiber splicing and patching with flexible cable management systems. MFM consists of a splice module and a patch module to provide a cost effective and easy installation solutions for fiber optic management system. ::: Features ::: All front access allow easy access to patch and fiber trays Interchangeable adapter plates accommodate various types of connectors Swing out adapter panel design of patch module allows easy access to the pigtail cable at the back Slide out splice module design allows access to fiber splice tray and reduce installation time Flippable splice organizer trays provide easy access to splices for maintenance Strength member clamp provides strain relief to avoid cable pull-out ::: Specification ::: Material Finish Colour Dimension : Aluminium/mild steel with epoxy coating : High quality oven baked epoxy powdered : Beige : 203mm(H) x 485mm(W) x 258mm(D) ::: Ordering Information ::: Part Number Description Dimensions (HxWxD) LTOC-MFM-72P MFM Patch Module 72 Core 203mm x 485mm x 258mm LTOC-MFM-144S MFM Splice Module 144 Core 203mm x 482mm x 258mm

Fiber Management System - NGFM ::: NGFM Fiber Management System ::: NGFM Fiber Management System are designed for terminating optical fiber in exchanges or communications room where higher density is required. NGFM features a modular system for splicing and patching with flexible cable management systems. All cable are front accessable with individual slide out splice organizer tray for easy fiber maintenance. A 46U NGFM is able to accomodate more than 600 splices and patch cables and is a cost effective solution for optic fiber management. ::: Advantages ::: Total Fiber Management Systems Space for excess patch cables High Density Splice and patch in one tray Cater for all connector type Individual slide out splice organizer trays provide easy access to splices Proper strain relief for incoming cables Good appearance ::: Specification ::: Dimension Finish Colour : Fiber Management Cabinet 46U x 300mm(D) x 900mm(W) : High quality oven baked epoxy powdered : Beige

Fiber Management System - NGFM ::: NGFM Fiber Management System ::: NGFM Splice & Patch Sub Rack NGFM Fiber Cabinet Fiber Outdoor Cabinet 288 Core Fiber Outdoor Cabinet 96 Core ::: Ordering Information ::: Part Number LTOC-NGFM-3U-48 LTOC-NGFM-5U-96 LTOC-NGFM-8U-144 LTOC-NGFM-10U-192 LTOC-NGFM-CAB LTOC-NGFM-OD-96 LTOC-NGFM-OD-288 Description Fiber Rack Mount NGFM 3U 48C Splice & Patch Fiber Rack Mount NGFM 5U 96C Splice & Patch Fiber Rack Mount NGFM 8U 144C Splice & Patch Fiber Rack Mount NGFM 10U 192C Splice & Patch NGFM Fiber Cabinet NGFM Outdoor Fiber cabinet 96 Core NGFM Outdoor Fiber cabinet 288 Core

Fiber Management System - RFPP ::: RFPP Fiber Distribution Panel (Pull Out Type) ::: RFPP Rack Mount Fiber Disribution Panels are design for terminating optical fiber in exchanges, communications rooms or in existing equipment racks where space is a constrain or higher density is required. FDP features a slide out design for effective installation and maintenance as well as front access patch panels for easy patching. ::: Features ::: Compact design for space saving Front access panel design for easy fiber patching Flappable splice organizer trays provide easy access for maintenance Side mounting bracket can be position in front or middle on 19" or 23" rack Slide out design for easy access during maintenance ::: Specification ::: Dimensions Material Finish Colour : 435mm (W) x 44mm (H) x 315mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered : Light grey ::: Ordering Information ::: Part Number Description LTOC-RFPP-24-E2 Fiber Rack Mount RFPP 1U Slide Out (E2000 x 24) LTOC-RFPP-24-SC Fiber Rack Mount RFPP 1U Slide Out 24 Port (SC Duplex) LTOC-RFPP-24-FC Fiber Rack Mount RFPP 1U Slide Out x 24 FC LTOC-RFPP-SN-1U Fiber Rack Mount RFPP 1U Slide Out 12 Core (Snap On) LTOC-RFPP-12-FC Fiber Rack Mount RFPP 1U Slide Out 12 Core FC LTOC-RFPP-SN-2U Fiber Rack Mount RFPP 2U Slide Out 24 Core (Snap On) LTOC-RFPP-48-E2 Fiber Rack Mount RFPP 2U Slide Out 48 Core E2000 LTOC-RFPP-48-FC Fiber Rack Mount RFPP 2U Slide Out 48 Core FC

Fiber Management System - RFPF ::: RFPF Fiber Distribution Panel (Fix Type) ::: RFPF Fixed Type Fiber Distribution Panel provides an economical way of terminating small optical fiber count in communications room or existing equipment racks where space is a constrain. ::: Features ::: Cost effective Compact design for space saving Front access panel design for easy fiber patching Side mounting bracket can be position in front or middle on 19" or 23" rack ::: Specification ::: Dimensions Material Finish Colour : 435mm (W) x 44mm (H) x 315mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered : Beige ::: Ordering Information ::: Part Number LTOC-RFPF-SN-12 LTOC-RFPF-SN-16 Description Fiber Rack Mount RFPF 1U Fixed (2 x 6 snap on) Fiber Rack Mount RFPF 1U Fixed (2 x 8 snap on)

Fiber Management System - WFP ::: WFP Wall Mount Fiber Distribution Box ::: WFP Wall Mount Fiber Distribution Boxes are used indoor to provide interconnection between active equipment and outside plant cables in customer premises access for commercial and industrial telecommunication application, or where space is constrained. WFP Series are designed for easy and efficient installation as well as highest quality and appearance. ::: Features ::: Double compartment designed separate carter splice from customer patching Double lockable and latchable door design provides security and protection for both spliced and patched fiber. Interchangeable adapter panel accomodate various types of connector Flappable splice organizer trays provide easy access for maintenance Cable gland and strength member clamp provides strain relief to avoid cable pull out ::: Specification ::: Dimension Material Finish Colour : LTOC-WFP-12 : 350mm (W) x 285mm (H) x 45mm (D) LTOC-WFP-24 :350mm (W) x 285mm (H) x 70mm (D) LTOC-WFP-48 :350mm (W) x 285mm (H) x 140mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered : Beige ::: Ordering Information ::: Part Number LTOC-WFP-12 LTOC-WFP-24 LTOC-WFP-48 Description Fiber Wall Mount WFP Distribution Box 12 Core Fiber Wall Mount WFP Distribution Box 24 Core Fiber Wall Mount WFP Distribution Box 48 Core

Fiber Management System - WFPE ::: WFPE Wall Mount Fiber Distribution Box - 6 port::: WFPE Wall Mount Fiber Distribution Boxes are used indoor to provide interconnection or termination of multimode and singlemode fibers. These cost effective distribution boxes are perfect for direct termination in telecommunication closet and where spaces is constrained. ::: Features ::: Cost effective Compact size Interchangeable adapter plate accommodate various types of connectors Double hinged and lock door for security Cable tie down bracket provide strain relief to avoid cable pull out ::: Specification ::: Dimensiong Material Finish : 270mm (W) x 170mm (H) x 45mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered ::: Ordering Information ::: Part Number LTOC-WFPE-6 Description Fiber Wall Mount WFPE Distribution Box 6 Core

Fiber Management System - WFPE ::: WFPE Wall Mount Fiber Distribution Box - 12 port ::: WFPE Wall Mount Fiber Distribution Boxes are used indoor to provide interconnection or termination of multimode and singlemode fibers. These cost effective distribution boxes are perfect for direct termination in telecommunication closet and where spaces is constrained. ::: Features ::: Cost effective Compact size Interchangeable adapter plate accommodate various types of connectors Double hinged and lock door for security Cable tie down bracket provide strain relief to avoid cable pull out ::: Specification ::: Dimensiong Material Finish : 305mm (W) x 235mm (H) x 76mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered ::: Ordering Information ::: Part Number LTOC-WFPE-12 LTOC-WFPE-24 LTOC-WFPE-48 Description Fiber Wall Mount WFPE Distribution Box 12 Core Fiber Wall Mount WFPE Distribution Box 24 Core Fiber Wall Mount WFPE Distribution Box 48 Core

Fiber Management System - TNB ::: TNB Fiber Distribution Panel (Pull Out Type) ::: TNB Rack Mount Fiber Disribution Panels are design for terminating optical fiber in exchanges, communications rooms or in existing equipment racks where space is a constrain or higher density is required. FDP features a slide out design for effective installation and maintenance. ::: Features ::: Compact design for space saving Front access panel design for easy fiber patching Flappable splice organizer trays provide easy access for maintenance Slide out design reduce time during maintenance ::: Specification ::: Dimensions Material Finish Colour : 490mm (W) x 88mm (H) x 360mm (D) : Mild steel with epoxy coating : High quality oven baked epoxy powdered : Beige color ::: Ordering Information ::: Part Number LTOC-PN-TNB-24FC LTOC-PN-TNB-36FC Description Fiber Rack Mount TNB Panel 2U 24C Fiber Rack Mount TNB Panel 2U 36C

Fiber Optic Closure - OFC-DR ::: OFC-DR Optical Dome Closure ::: OFC-DR Optical Dome Closure are designed for easy assembly and re-entry in the external plant installation. The closure featured a mechanical cable sealing system which made re-entry at no cost. The waterproof and rugged construction makes these closures perfect for the extreme plant environment. ::: Features F t ::: "O" ring. 2 part clamp and bolt sealing design, no re-entry tape or sleeve required during re-access. Save cost No loose part - easy of installation Mechanical cable sealing system for cable entry, without use of heat shrink tubing Accomodate extensive range of cable size Multiple drop cable ports for ready access Mountable in manhole, on wall and pole Security Locking Device No special training and tooling requierd Various dome size available ::: Specification ::: - Dimensions : S - 440mm (L) x 210mm (O.D) L - 480mm (L) x 250mm (O.D) - Colour : Black ::: Ordering Information ::: Part Number LTOC-OFC-DR-12A LTOC-OFC-DR-24A LTOC-OFC-DR-36A LTOC-OFC-DR-48A LTOC-OFC-DR-72A LTOC-OFC-DR-96B LTOC-OFC-DR-120B LTOC-OFC-DR-144B Description Optical Fiber Dome Closure OFC-DR 12 core Optical Fiber Dome Closure OFC-DR 24 core Optical Fiber Dome Closure OFC-DR 36 core Optical Fiber Dome Closure OFC-DR 48 core Optical Fiber Dome Closure OFC-DR 72 core Optical Fiber Dome Closure OFC-DR 96 core Optical Fiber Dome Closure OFC-DR 120 core Optical Fiber Dome Closure OFC-DR 144 core

Fiber Optic Closure - OFC-DS ::: OFC-DS Optical Dome Closure ::: OFC Optical Closure are designed for easy assembly and re-entry in the external plant installation. The waterproof and rugged construction makes these closures perfect for the extreme plant environment. ::: Features ::: "O" ring. 2 part clamp and bolt sealing design, no re-entry tape or sleeve required during re-access. Save cost No loose part - easy of installation Cable entry ports are sealed to cable by the use of unique mechanical clamp on system Mountable in manhole, on wall and pole No special training and tooling requierd Various dome size available ::: Specification ::: - Dimensions : S - 470mm (L) x 120mm (O.D) - Materail : Co-Polymer Polyproplylene - Colour : Black ::: Ordering Information ::: Part Number LTOC-OFC-DS-12 LTOC-OFC-DS-24 LTOC-OFC-DS-36 LTOC-OFC-DS-48 LTOC-OFC-DS-72 Description Optical Dome Closure OFC-DS 12 core Optical Dome Closure OFC-DS 24 core Optical Dome Closure OFC-DS 36 core Optical Dome Closure OFC-DS 48 core Optical Dome Closure OFC-DS 72 core

Fiber Optic Closure - OFC-IB ::: OFC-IB Optical Dome Closure ::: OFI Inline Optical Closure features a fully mechanical system makes assembly and re-entry easy.the waterproof and rugged construction are desinged for the extreme plant environment. ::: Features ::: 2 Part stainless steel strap locking design, no re-entry tape required during re-access. Save cost No loose parts - ease of installation Cable entry ports are sealed to cable size by the use of sealing tape Mountable in manhole, on wall and pole No special training and tooling required Various size available ::: Specification ::: - Dimensions : OFC-IB - 430mm (L) x 180mm (W) x 170mm (H) : - 380mm (L) x 155mm (W) x 155mm (H) - Materail : Co-Polymer Polyproplylene ::: Ordering Information ::: Part Number LTOC-OFC-IB-48C LTOC-OFC-IB-96C Description Fiber Closure Inline OFB-IB-48 Core Fiber Closure Inline OFB-IB-96 Core

Fiber Optic Closure - OFC-IM3 ::: OFC-IM-3 Optical Dome Closure ::: Litech Optical Inline Closures is designed for used in external plant environment. The waterproof and rugged construction makes these closure perfect for underground, aerial and pedestal applications. The closures features full mechanical systems for easy assembly and easy to re-enter. OFC-IM-3A is designed to accommodate up to 48 fibers where as OFC-IM-3B is designed to accommodate up to 192 fibers. ::: Features ::: Manufactured with engineering plastic for external used No loose parts - ease of installation Double strain relief for cables Mountable in manhole, on wall and aerial No special training and tooling required Various size available Pressurized valve for flash test ::: Specification ::: Specification (mm) OFC-IM-3A OFC-IM-3B Max Cable Diameter 25mm 25mm Min Cable Diameter 10mm 10mm Closure Length 583mm 660mm Closure Width 186mm 222mm Closure Height 116mm 197mm Useable Length 387.5mm 406mm Useable Width 126mm 140mm Useable Heigth 76mm 89mm ::: Ordering Information ::: Part Number LTOC-OFC-IM3A-12 LTOC-OFC-IM3A-24 LTOC-OFC-IM3A-36 LTOC-OFC-IM3A-48 Description Fiber Closure Inline OFC-IM3A-12 Fiber Closure Inline OFC-IM3A-24 Fiber Closure Inline OFC-IM3A-36 Fiber Closure Inline OFC-IM3A-48

Optical Fiber Closure OFC-IM-3-Re-entry Kit ::: Inline Closure Re-entry Kit ::: ::: Features ::: Excellent sealing to metal, rubber and cable jacket materials Silent chemical resistance Moldable and conformable for irregular surface Excellent weather and moisture protection for used in outdoor ::: Specification ::: Sealing Washer Sealing Tape Sealing Cord Hose Clamp Dummy Plug Cable Tie 8 pcs 2 rolls 2 strips 2 pcs 2 pcs 8 pcs ::: Ordering Information ::: Part Number OFC-RNTY-01A OFC-RNTY-01B Description Closure Reentry Kit For Up To 48 Fiber Closure Reentry Kit For Up To 96 to 192 Fiber

1.4.1 Optical Cable Assemblies Fiber Cable Assembly

Optical Cable Assemblies Pigtail Simplex Patchcord Duplex Patchcord Distribution Patch Cable Breakout Patch Cable Outdoor Patch Cable

Optical Cable Assemblies ::: Application ::: Telecommunication network CATV system Local Area Network ::: Specification ::: Value Characteristics Conditions Min Typ Max Insertion Loss (db) 0.15 0.40 Return Loss (db) Singlemode 0º 50 Singlemode 8º 60 Multimode 40 Durability (db) 1,000 matings 0.20 Operating Temperature (db) -40ºC~80ºC 0.20 Humidity Cycling (db) 75ºC, RH 95% 0.20 Vibration (db) 10~55Hz (3 Axis) 0.20 Impact 1.5m drop, 8 cycles 0.20 ::: Ordering Information ::: LTOC - - - Connector Type ( 1st & 2nd Connector ) D4 : D4 LC : LC DIN : DI ST : ST FC : FC MTRJ : MR FC/APC : FA SMA : MA SC : SC E-2000 : E2 SC/APC : SA E2000/APC : EA FDDI : FD MU : MU Cable Length Any customized length i.e : 3 : 3.0 mtrs ; 10 : 10.0 mtrs Type Of Fiber SM : Singlemode MM : Multimode 62.5um MF : Multimode 50um Type Of Cable 01 : 250um 04 : Duplex 02 : 900um 05 : Distribution 03 : Simplex 06 : Breakout

1.5.1 FLS-100 Stablized Laser Light Source 1.5.2 VFL-200 Visual Fault Locator 1.5.3 FPM-300 Optical Power Meter 1.5.4 LFT-400 Optical Talk Set 1.5.5 OFI-500 Optical Fiber Identifier 1.5.6 OFA-600 Variable Optical Attenuator Fiber Test Equipment

Fiber Optic Test Equipment FLS-100 Stabilized Laser Light Source VFL-200 Visual Fault Locator FLS-100 VFL-200 FPM-300 Optical Power Meter LFT-400 Optical Talk Set FPM-300 LFT-400 OFI-500 Optical Fiber Identifier OFA-600 Variable Optical Attenuator OFI-500 OFA-600

Fiber Optic Test Equipment ::: FLS-100 Stabilized Laser Light Source ::: The FLS-100 series light source is a simple but versatile. FLS-100 are prefect for use in fiber testing : splicing, connector loss, cable acceptance, fiber attenuation, and other LAN, FDDI, and ISDN network. The straight forwards control panel is easy to use. Coupler with FPM-300 power meters, it is ideal for fiber end to end testing. ::: Features ::: Portable and easy to use CW and 2KHz modulation Ideal for single-mode fiber testing Build-in rechargeable battery pack and battery low indicator LCD display emitter power level and wavelength Dual wavelength output Perfect for field Telecom, SONET, and CATV field works ::: Specification ::: Item/Model FLS-100 Wavelength range (nm) 1310/1500 ± 20 Emitter Laser Diode Output Power via 9/125m -7/-6 Modulation CW, 1Hz, 21Hz, 2701Hz, 1000Hz, 2000Hz Stability (20 C 15min) ± 0.05db Fiber Connector FC Working Temperature ( C) -10~+60 Storage Temperature ( C) -25~+70 Battery Operating Time (mins) 18 Dimensions (mm) 180 x 90 x 36.5 Weight (g) 300 Power Supply (battert rechargeable) + power supply adapter

Fiber Optic Test Equipment ::: VFL-200 Visual Fault Locator ::: Litech Visual Fault Locator Pen is equipped with a 650mm high power visible diode, can be operated in CW (continuous) or MOD (1Hz modulation) mode. Visual Fault Locator Pen is housed in a pocket-size, rugged brass casing, and comes with a carrying case. ::: Features ::: For locating broken points in fibers Equipped with a 650-nm visible laser diode Can be operated in continuous or pulse modes for clear noticeable results One green LED indicator shows the operating mode Power switch on the end for battery on/off Push button operates CW / Mod. (2.5 Hz frequency) / pause Clip pocket-size pen design Protective cap for extra protection Control Button Push 1 Time : bind light Push 2 Time : glittle Push 3 Time : power off Power (on/off ) ::: Specification ::: Model Number VFL-200 Light source Class 3A Laser diode Central Wavelength 650nm + 10nm Spectral width (FWHM) < 10nm Into SMF-28 single mode fiber 1mW Transmision CW mode or 2.5 Hz modulated Environment Operation Storage -10 o C to +50 o C, 0 to 95% RH (non-condensing) -20 o C to +80 o C, 0 to 95% RH (non-condensing) Power supply Dimension & Weight (w/batteries) Connector two 1.5V AA Alkaline batteries (Do not use rechargeable type) Length : 170mm Diameter : 13.5mm Approx. weight : 88mg Universal

Fiber Optic Test Equipment ::: FPM-300 Optical Power Meter ::: The FPM-300 series is a range of optical power meter covering spectral range from 800nm to 1600nm ; ideal for both single-mode and multi-mode fiber testing. FPM-300 optical power meter is light weight and easy to use. ::: Features ::: Compact design and portable Large LCD display screen Resolution to 0.01dB; accuracy to ± 5% Measurement units in db, dbm, mw and nw Selections of relative/absolute powers Deal for both multi-mode and single-mode optical fibers Build-in rechargeable battery pack Baterry-low indicators Calibrated at 850nm, 980nm, 1310nm,1500nm Deal for LAN, ISDN, FDDI, Telecom, SONET and CATV ::: Specification ::: Item/Model FPM-301 FPM-302 FPM-303 FPM-304 Wavelength range (nm) 800~1600 Sensor Type InGaAs Dynamic Range (dbm) -70~ +3-60~ +10-30~ +20-20~ +30 Accuracy (db) ± 0.25 Resolution 0.01dB Working Temperature ( C) -10~+60 Storage Temperature ( C) -25~+70 Auto Off Time (mins) 10 Battery Operating Time (mins) 28 Dimensions (mm) 150 x 74 x 25 Weight (g) 250 Power Supply 8.4V (battert rechargeable) + power supply adapter

Fiber Optic Test Equipment ::: LFT-400 Optical Talk Set ::: LFT-400 designed for communication on-site by transmitting voice into modulated optical signal through the fiber link, with high voice quality. ::: Features ::: Full duplex communication via a SM fiber Large LCD Screen Seven color backlight Adjustable headset volume Digital communication with minimized line noise Low power Alam ::: Specification ::: Item/Model Communication Central Wavelength FWHM Emitter Transmission Distance Dynamic Range Output Power 3 Output Stability (typ.)* Temperature Fiber Connector Operating Time LFT-400 Full Duplex 1310/1500 ± 20 nm <=5nm Laser Diode <=80 Km 40dB (9 / 125 mm) 3-4.5dB or 2KHz, 500 modulator ± 0.1dB / ± 0.25dB (1/8 Hrs.) ± 0.02 dbm / ºC FC 5hrs (Continuous) * dbr : measurement value (in db) against a " reference" which is the light source itself

Fiber Optic Test Equipment ::: OFI-500 Optical Fiber Identifier ::: ::: Features ::: Easy and convenient operation with a single keystroke Detecting three signal frequencies 2kHz, 1kHz, 270Hz Displaying signal in intensity Concise LED light Low battery reminder Two 1.5V dry batteries (Mignon AA size) Interchangeable adapter heads (clamps) for bare and jacketed fiber ::: Specification ::: Model Number OFI 500 Wavelength Range Recognizable signal Type 650nm ± 10mm CW, 270Hz ± 10%, 1KHz ± 10%, 2kHz ± 10% Detector Type InGaAa 2pcs Detecting Sensitivity -55dBm Clamp Type HO. 25 bare fiber H0.9/H2.5/H3.0 jacheted fiber Signal Traffic Left or right LED Signal Frequency 270Hz, 1kHz, 2kHz LED Signal Intensity 5 grades LED Low Battery LED Operating Temperature ( C) -10 C ~ +60 C Storage Temperature ( C -25 C ~ +70 C Battery Operating Time (h) 8h Dimentions 200mm x 80mm x 40mm Power Supply 1.5V AA batteries *2pcs Weight 200g

Fiber Optic Test Equipment ::: OFA-600 Valiable Optical Attenuator Litech OFA-600 variable optical attenuator is designed for singlemode application at 1310nm and 1550nm. OFA variable optical attenuator allow variable attenuation setting from 0 to 60dB. This handheld variable attenuator is designed for system testing and acceptance, optical margin analysis, system loss simulation or power meter calibration. A perfect tool for field, manufacturing or R&D applications. ::: Features ::: Large LCD screen +/- 0.1dB attenuation resolution 0-60dB variable attenuation range > 50dB return loss 0.1db, 1db and 10db attenuation step selection Interchangeable adapter interface ::: Specification ::: Model Number OFA-600-50D OFA-600-60D Wavelength 1310nm/1550nm 1310nm/1550nm Attenuation Range 0~ -50dB (without insertion Loss) 0~ -60dB (without insertion Loss) Accuracy ± 0.1dB (0db ~20dB) ± 0.2dB (20db ~50dB) ± 0.1dB (0db ~20dB) ± 0.2dB (20db ~60dB) Resolution Insertion Loss 0.1 db < 0.15 db Attenuation Repetition 0.05 db Return Loss > 60dB(PC), >50db(PC) Baterry lifetime Working Time > 10 hours ( 8.4V/NI-cd battery) Fiber Type SMF 3/125μ Optical Adapter FC (Standard), ST, SC, (Optional) Operation Temperature -5 ~ +60 C Storage Temperature -25 ~ +70 C Dimension Weight 14.0 x 7.8 x 3.8cm (without Holster),17.3 x 9.0 x 4.2cm (with Holster) 450g

1.6.1 SM Fiber To Ethernet Converter 1.6.2 MM Fiber To Ethernet Converter 1.6.3 Multimode To Singlemode 1.6.4 Gigabit To Ethernet Converter 1.6.5 Fiber To RS-232/423/485 Converter 1.6.6 E1/T1, Datacom & Ethernet Multiplexer 1.6.7 Single E1/T1 To Fiber Converter Fiber Converter

Fiber Optic Converter Singlemode Fiber to Ethernet Converter Multimode Fiber to Ethernet Converter LTCV-100S-SC-XX LTCV-10/100S-SS-XX Multimode to Singlemode Converter Gigabit to Ethernet Converter LTCV-SMMM-SC-XX LTCV-1000S-SC-XX Fiber to RS-232-422-485 Converter Single Fiber to E1-T1 Converter LTCV-MM232-ST LTCV-ESM-01

Fiber Optic Converter ::: 10/100 Base-TX to 10/100 Base-FX Fiber SC/ST Converter (Singlemode) ::: The Fast Fiber Converter FIB-10/100M/ST and FIB-10/100M/SC provides you with ST and SC connector for your fiber optic cable and RJ-45 ports (straight through and crossover) for your 10/100 Base-TX twisted pair cable connection. Ultilizing singlemode optical cable, the cabling distance of your 100Base-TXnetwork may be extended to 15, 30 or 50 kilometers. When auto-negeotiation is selected, these units will automatically tailor themselves to convert both halfduplex and full duplex signals, depending on your specific network needs. You may also set the unit to convert signals in full-duplex or half duplex only.five LED indicators signal the power status of the converter, RJ-45 port and FX port activity, and full or half duplex status ::: Features ::: Complies with IEEE 802.3u 10/100 Base-FX and 10/100 Base-TX standards Fiber connectivity models for 15, 30 or 50KM ST or SC connector accomodates singlemode fiber size 9/125um Two RJ-45 for straight or cross-over connection Full duplex, Half duplex or auto selectable 5 diagnostic LEDs ::: Specification ::: Compatibility Standards Protocol IEEE 802.3u 10/100 Base-TX and 10/100 Base-FX CSMA/CD Physical Characteristics Interface Maximum Segment Length Temperature Humidity External Power Supply ST or SC connector, using 9/125um singlemode fiber optic cable RJ-45 connector, using UTP 100 ohm Cat 5 or above cable UTP cable (10/100 Base-FX) : 100 meters singlemode cable, full duplex: 15, 30 or 50 Kilometers 0ºC to 70ºC (Operating) 10% to 90% (Non-condensing) Input Rating : 110 or 220 VAC, 50-60Hz Output Rating : 9VDC, 800mA ::: Ordering Information ::: Part Number FIB-10/100S/ST(SC) 15 FIB-10/100S/ST(SC) 30 FIB-10/100S/ST(SC) 50 FIB-10/100S/ST(SC) 120 Description 10/100 Base-TX to Fiber Converter, Singlemode, ST(SC) Type, 15Km 10/100 Base-TX to Fiber Converter, Singlemode, ST(SC) Type, 30Km 10/100 Base-TX to Fiber Converter, Singlemode, ST(SC) Type, 50Km 10/100 Base-TX to Fiber Converter, Singlemode, ST(SC) Type, 120Km

Fiber Optic Converter ::: 10/100 Base-TX to 10/100 Base-FX Fiber SC/ST Converter (Multimode) ::: The Fast Fiber Converter Multimode Series FIB-10/100M/ST and FIB-10/100M/SC provides you with ST or SC connector for your fiber optic cable and RJ-45 ports (straight through and crossover) for your 10/100 Base-TX cable connection repectively. When auto-negeotiation is selected, these units will automatically tailor themselves to convert both halfduplex and full duplex signals, depending on your specific network needs. You may also set the unit to convert signals in full-duplex or half duplex only. The Fast Fiber Converter give you the freedom to extend your 10/100 Mpbs cabling distance by allowing connectivity up to 2KM. Five LED indicators signal the power status of the converter, RJ-45 port and FX port activity, and full or half duplex status ::: Features ::: Complies with IEEE 802.3u 10/100 Base-FX and 10/100 Base-TX standards Fiber connectivity up to 2Km ST or SC connector accomodates multimode fiber optic cable size 62.5/125um Two RJ-45 for straight or cross-over connection Full duplex, Half duplex or auto selectable 5 diagnostic LEDs ::: Specification ::: Compatibility Standards Protocol IEEE 802.3u 10/100 Base-TX and 10/100 Base-FX CSMA/CD Physical Characteristics Interface Wavelength Maximum Segment Length Temperature External Power Supply ST or SC fiber connector, using 62.5/125um multimode fiber cable RJ-45 connector, using UTP 100 ohm Cat 5 cable 1310nm UTP cable (10/100 Base-FX) : up to 100 meters multimode cable, (10/100 Base-FX) : up to 2000 meters 0ºC to 70ºC (Operating) Input Rating : 110 or 220 VAC, 50-60Hz Output Rating : 9VDC, 800mA ::: Ordering Information Part Number LTCV-TPMM-ST-2 LTCV-TPMM-SC-2 Description 10/100 Base-TX to Fiber Converter, Multimode, ST Type, 2Km 10/100 Base-TX to Fiber Converter, Multimode, SC Type, 2Km

Fiber Optic Converter ::: Multimode To Singlemode ::: The MSC series are fast ethernet 100Base-FX fiber converter specially designed for the fiber optic cabling conversion between 1300nm multimode and 1300nm singlemode. The full duplex cabling in multimode and singlemode offers bandwidth of up to 200Mbps and allows the transmission distance up to 2Km over multimode and 20Km over singlemode. There are 40Km and 100Km options for special applications over singlemode fiber. ::: Features ::: IEEE 802.3 u 100 Base-FX Standards Support half duplex and full duplex Support multimode fiber 50/125 nm or 62.5/125 nm or 100/140 nm Support singlemode fiber 8.3/125, 8.7/125, 9/125 and 10/125 nm ::: Specification ::: Standards Fiber Port Connector Fiber cable Multimode Fiber cable Limitation Singlemode Fiber Cable Limitation Data Transfer Rate LED Indication Power Requirement Operating Temperature Operating Humidity Dimension Certificate IEEE 802.3u 100 Base-TX/10 Base-FX SC model : Two connector 1300 nm VF-45 Model : Two MT-RJ Connector 1300 nm MT-RJ Model : Two MT-RJ Connector 1300 nm 50/125, 62.5 or 100 140um multimode 8.3/125, 8.7/125, 9/125 or 10/125um singlemode Multimode half duplex : 412m Multimode full duplex : 2 Km SC singlemode full duplex : 20 Km SC 4 Singlemode full duplex : 40 Km SC 6 Singlemode full duplex : 60 Km 100Mpbs for half duplex mode 200 Mpbs for half duplex mode Multimode fiber port : Link / Actrivity Singlemode fiber port : Link / Actrivity 1A @ + 5VDC 0~50ºC (32º ~ 122ºF) 5% - 9%, Non condensing 26.2 (H) x 70.3 (W) x 94 mm CE Mark PCC Part 15 Class A ::: Ordering Information ::: Part Number LTCV-SMMM-SC-20 LTCV-SMMM-SC-40 LTCV-SMMM-SC-100 Description 100 Base - FX SC multimode 2 Km to SC Singlemode 20 Km 100 Base - FX SC multimode 2 Km to SC Singlemode 40 Km 100 Base - FX SC multimode 2 Km to SC Singlemode 100 Km

Fiber Optic Converter ::: 1000 Base-TX to 1000 Base LX Gigabit To Ethernet Converter ::: The FIBI-1000 is a standalone optical fiber media converter for 1000Base Ethernet to fiber that also provides NMS functions for Link-Loss-Forwarding, Remote-Monitoring-Status, and Loop-Back-Test. When auto-negotiation is selected, these units will autonatically tailor themselves to convert both half-duplex and full-duplex signals, depending on your specific networks needs. ::: Features ::: Complies with IEEE 802.3ab, 1000Base-TX, IEEE 802.3z, 1000Base-SX/LX Gigabit Ethernet Standards. Provides one 1000Base-TX port, one 1000Base-SX/LX port, voltage 3.3V {SX-Multi-mode, LX- Single-mode} Three versions supports fixed SC or LC connector types, GBIC socket with SC, or SFP with LC. Sockets allow easy replacement of the snap-out transceiver models. Supports Full-duplex and Half-duplex mode for the Fiber and LAN ports. Automatic MDI/MDX crossover function. 6 diagnostic LEDs for Power, TX link/transmit, FX link/transmit, Full/Half Duplex mode, CPE, LLF and LBT. Advanced Features: 1) Supports Link-Loss-Forwarding function via front panel DIP switch. 2) Supports for the Loop-Back test via front panel DIP switch. 3) Supports remote monitor status via front panel DIP switch. ::: Specification ::: Environment Temperature 0ºC to 50ºC (Operating),0ºC to 70ºC (Storage) Humidity 20% to 80% Non-condensing (Operating), 10% to 90% (Storage) Dimension 122.6mm(L) x 85.6mm(W) x 20mm (H) Weight 0.663lbs (300g) Power Module AC Power Module Input Universal 90 ~ 264 VAC Frequency 47 ~ 63 Hz Output DC 12V, 8.5A EMI FCC Class A, CE Power Consumption <4W Power Budget Multimode >13dB : 0.55km Singlemode >10.5dB : 10km >18dB : 30km >19dB : 50km

Fiber Optic Converter ::: Fiber To RS-232/423/485 Converter ::: The FIBI-485A provides a fiber converter solution to extend RS-485 transmission distance up to 4Km over multimode fiber or up to 120Km over single mode fiber. The converter is equipped with multiple interface circuits, for connection to RS-232, RS-422, or RS-422/485 (2 or 4-wire). The FIBI-485A secures data transmissions over EMI resistant fiber at speed up to 256kbps for RS-232, or up to 1024kbps for RS-422/485. ::: Features ::: Selectable data I/F for RS-232/423/485/TTL. Selectable for two or four wire RS-485/422. Speeds up to 256kbps for RS-232 and RS-423. Speeds up to 102kbps for RS-485/422. Extend transmission distance up to 120Km. Supply +5V (60mA) output for external device. ::: Specification ::: Optical Wavelength 1310/850nm Optical Mode Single/Multimode Operating Distance up to 4Km on multi-mode up to 120Km on single mode Fiber Type 50/125um, 60/125um Optical Budget 14dB Transmitter Power -15dBm Receiver Sensitivity -29dBm Data Signal Data Formats: RS-485/422 2-Wire RS-485/422 4-Wire RS-232+RTS/CTS 5-Wire RS-2325 3-Wire RS-423+RTS/CTS 5-Wire RS-423 3-Wire Baud Rate: RS-485 1024kbps RS-232 120kbps RS-423 120kbps TTL 1024kbps Bit Error Rate: <10-10 Electrical Input voltage Current Requirement Power Consumption Connectors Optical Data Mechanical Length Width Height Weight 12-18VDC 300mA 5 Watts ST Type 6-Position detachable 138mm 86mm 20mm 660g

Fiber Optic Converter ::: FOM - Series Fiber Optic Multiplxer ::: ::: Product Overview ::: The FOM new generation of the manageable fiber optic multiplexer, which is designed to extend transmission distance of 4 / 8 / 16 E1s data / voice over single core or dual core of single mode fiber cable with distance up to 50Km. FOM Fiber Optic Multiplxer are designed to used in LAN environment, mobile basic station to MSC, PABX extension & etc. Integrated with transmission and multiplex function, FOM receives and deliver synchronous E1 data from G.703 networks over fiber optics. 1+1 optical protection is available. For the higher flexibility, dual E1 interface connectors of 75 and 120 ohm are equipped for the 4E1 and 8E1 model; with user definable for the E1 impedance interface. FOM enhances the management capability with SNMP and GUI web management by the optional built-in management module. CLI also support via telnet or RS485 / RS232 console port. LED indicators are equipped on the front panel for all interfaces transmission statues. The FOM support local and remote loopback for the test of tributary and optical interfaces by hardware switches or management software. ::: Advantages ::: 4 / 8/ 16 G.703 E1 ports Front panel LED indicators Local and remote loopback facility Single core fiber with built-in WDM Optional 1+1 fiber protection Dual E1 interface for 4E1 and 8E1 model Redundancy power supply with any combination of AC or DC power 19 rack mountable SNMP v1 / v2 Management

Fiber Optic Converter ::: FOM - Series Fiber Optic Multiplxer ::: ::: Technical Specification ::: Optical Interface Connector: FC-PC or SC or ST Fiber Optic Type: 1310 / 1550 nm, SM LD Dual Core Fiber Transmit Power: >= -10dBm Receive Sensitivity: <= -38dBm (BER<= -10) Link Budget: 28 dbm Single Core Fiber Multiplexing: WDM Transmit Power: >= -14 dbm Receive Sensitivity: <= -32 dbm (BER<= -10) Link Budget: 18 dbm Power Supply AC Power 110V or 220V Range: 95 ~ 120V or 180 ~ 260V DC Power - 48V or + 24V Range: - 38 ~ - 72V or 18 ~ 36V Power Consumption: < 10W E1 Interface Standard: ITU-T G.703 Data Rate: 2.048Mbits + 50ppm Line Code: HDB3 Impedance: 75 ohm / BNC, 120 ohm / RJ45 Jitter & Wander: ITU-T.G823 Network Management Standard: SNMP v1, v2 Interface: 10Base-T Ethernet Connector: RJ45 Web Management Standard: IE 6.0 Interface: IP / Ethernet CLI Console Standard: RS232 / RS485 serial com port Connector: DB25F Environment Working Temperature: 0 ~ 50 oc Storage Temperature: - 40 ~ + 70oC Relative Humidity: <95% ROUTER E1 E1 ROUTER SWITCH E1 E1 SWITCH MUX E1 FOM-M(MK2) FOM-M(MK2) E1 MUX ::: Ordering Information ::: Part Number LTOC-FOM-4E1-M LTOC-FOM-8E1-M LTOC-FOM-16E1-M Description Fiber Optic Multiplxer 4xE1 (Dual Interface Selectable) Fiber Optic Multiplxer 8xE1 (Dual Interface Selectable) Fiber Optic Multiplxer 16xE1 (75 or 120 ohm orderable)

Fiber Optic Converter ::: Single E1/T1 to Fiber Converter ::: The FIBI Family are the standalone fiber media converters available in a number of different models. The FIBI-E1 is a fiber media transport for G.703 E1transmission. The BNC model provides unbalanced 75Ohm coaxial connections while the RJ-45 model provides balanced 120Ohm connections over twisted pair wiring. The FIBI-T1 is a fiber media transport for G.703 T1 transmission and features an RJ-45 connector for connection to 100 Ohm twisted pair wiring. All media converters are available with either multi-mode and single-mode optical tranceivers and with connectors for SC, ST, FC, LC, or MT-RJ. ::: Features ::: T1/E1 RJ45/RJ48 or Coax to Fiber converter Supports multimode, single-mode, and single fiber with ST, SC, LC and MT-RJ connectors User-selectable Local Loop-Back, Force 1's to Copper, Force 1's to Fiber, and Fiber Test modes LED indicators - Power, Fiber Link, LINE (E1 or T1) Link, Test mode Network Management via Terminal or SNMP card Supports AMI or B8ZS/HDB3 modes RJ45 port with DCE/DTE switch ::: Specification ::: E1 Specifivation Ports 1 port Standards ITU-T G.703, G.704, G.706, G.732, G.823 Framing Unframed, CAS, CCS Data rate 2.048Mbps Line Code HDB3 Receive Level Short haul - 15db Line impedance 75 ohms 120 ohms Connector RJ-45 for 120ohms BNC for 75 ohms Distance Connectivity 002 2Km [multi-mode only] 015 15Km 030 30Km 050 50Km 120 120Km E1 Specifivation Ports 1 port Standards ITU-T G.703, G.704,AT&T TR-62411,ANSI T1.403 Framing Unframed, D4, ESF Data rate 1.544 Mbps Line Code B8ZS, AMI Receive level Short haul - 15db Line impedance 100ohms Connector RJ-45

1.7.1 Double Suspension Set 1.7.2 Suspension Set 1.7.3 Tension Set 1.7.4 Down Lead Cushions 1.7.5 Tighten Harness 1.7.6 Stock Bridge Damper 1.7.7 OPGW Closure OPGW & ADSS Accessories

OPGW & ADSS Accessories Double Suspension Set Suspension Set Tension Set Stock Bridge Damper OPGW Closure Vibration Damper Down Lead Cushions Tighten Harness TGX TGJ TTZX TTZJ ZZJG

Suspension Clamps for ADSS ::: Cross Section Diagram ::: 1. Clevis thimble(optional) 2. Cast aluminium housing 3. Elastomer insert clamp 4. Suspension rods 5. Structural reinforcing rods ::: Characteristic ::: Single preformed rods. Simple Structure with low weight Easy to install Vertical break load 70kN ::: Applications ::: All kinds of ADSS Corner of the line less than 300 Pole or tower use ::: Technical characteristic ::: The structure of the two of preformed strand string could make better protection for FOC with long time unequal load operation. It can bear larger dynamic stress and has larger grip strength. Because of the large touching area, equally distributed power and non intensive stress pivot, FOC is strengthened at the fixing point and therefore better protected. Selected materials are well against corrosion, oxidation and aging, and these features could lengthen the operation of FOC. Simple structure and convenient installation need no special tools or maintenance. ::: Ordering Information ::: Ordering Information Type Span Length of structural reinforcing rods Length of suspension rods Weight(kg) LTOC-ADSS-SUS-AC0200 150~200 1600 1000 3.2 LTOC-ADSS-SUS-AC0300 201~300 1800 1200 3.5 LTOC-ADSS-SUS-AC0400 301~400 1900 1300 3.8 LTOC-ADSS-SUS-AC0500 401~500 2000 1400 4.1 LTOC-ADSS-SUS-AC0600 501~600 2200 1600 4.5 LTOC-ADSS-SUS-AC0800 601~800 2400 1800 4.8 LTOC-ADSS-SUS-AC1000 801~1000 2600 2000 5.0

Tension Clamps for ADSS ::: Cross Section Diagram ::: 1. Clevis thimble(optional) 2. PH extension link(optional) 3. Thimble eye 4. ID tag 5. Dead-end component 6. Structural reinforcing rods The clamp distributes radial pressure equally and passes axial force. It also provides safe and reliable gripping power in the premise of protecting cable to avoid damage. ::: Applications ::: Use in terminal poles, tension poles, connecting poles and conner(elevation) poles having turning angle more than 250 ::: Technical characteristic ::: Wall of both inner and outer standing wires are sprayed with carborundum in order to increase the damping effect, through which cables are finely protected. Cables are finely protected because stress is equally distributed in large touching area without intensive stress pivot. All the selected materials are against corrosion and have long operation life. Simple structure, easy installation and free from special tools or maintenance.

OPGW Closure ::: OFC-OPGW Dome Closure ::: OFC-OPGW Optical Dome Closure are designed for easy assembly and re-entry in the external plant for OPGW and ADSS cable applications. The closure featured a mechanical cable sealing system which made re-entry at no cost. The waterproof and rugged construction makes these closures perfect for the extreme aerial plant environment. ::: Features ::: Aluminum Alloy case and bracket design Stainless Steel Clamp and " O" ring sealing design, no re-entry tape or sleeve required during re-access. Save cost No loose part - easy of installation Multiple drop cable ports for ready access Mountable in pole for aerial applications No special training and tooling requierd ::: Specification ::: - Dimensions : S - 450mm (L) x 210mm (O.D) - Gross weight : 9 kg ::: Ordering Information ::: Part Number LTOC-OFC-OPGW-12 LTOC-OFC-OPGW-24 LTOC-OFC-OPGW-36 LTOC-OFC-OPGW-48 LTOC-OFC-OPGW-72 Description Optical Dome Closure OFC-OPGW 12 core Optical Dome Closure OFC-OPGW 24 core Optical Dome Closure OFC-OPGW 36 core Optical Dome Closure OFC-OPGW 48 core Optical Dome Closure OFC-OPGW 72 core

1.8.1 Fiber Optic Tool 1.8.2 Fiber Optical Basic Tool Kit 1.8.3 Fiber Optical TerminationKit 1.8.4 High Precision Cleaver 1.8.5 V-Groove Mechanical Splice 1.8.6 Fiber Optic Cleaning Kit Fiber Optic Tools

Fiber Optic Tools and Consumables Jacket Stripper Fiber Stripper Fiber Stripper Fiber Stripper LTOC-TL-JS LTOC-TL-STR-CLA LTOC-TL-SP LTOC-TL-NS Kevlar Cutter - Premium Fiber Optic Scissors Fiber Optic Crimping Tool Buffer Tube Stripper LTOC-TL-KC-PR LTOC-TL-375 LTOC-TL-CRP LTOC-TL-BS Tube Slitter Fiber Quick Cure Epoxy Polish Glass Plate Curing Oven LTOC-TL-TS LTOC-TL-QC-HAR/PRI LTOC-TL-PGP LTOC-TL-CO Epoxy Syringe Blower Cleaner Inspection Scope Super Fine Tip Stainless Tweezer LTOC-TL-SE LTGN-TL-CP-B LTSS-TL-INS LTGN-TL-GCP-005 Scribe Tool (Carbide) Scribe Tool (Ruby) Alcohol Dispensor Bottle Piano Wire LTSS-TL-ST-CAR LTSS-TL-ST-R LTOC-TL-BOT LTOC-TL-PIW

Fiber Optic Tools and Consumables Cleaning Cassette Lint Free Tissue Polishing Film Polishing Jig LTOC-TL-CTP LTSS-TL-KW LTOC-TL-PF-XX LTOC-TL-PJ-XX Mechanical Lab Splice V-Groove Temporary Splice Fiber Cleaver In-Adapter Ferrule Cleaner LTOC-MLS LTOC-TL-VGRO LTOC-TL-FC-XXXX LTOC-IFC-2.5 Fiber Termination Tool Kit Fiber Basic Tool Kit Fiber Cleaning Kit Fiber Breakout Kit (Blue-Big) LTOC-TL-TER-KIT LTOC-TL-BK-KIT LTOC-TL-CTP LTOC-BOK-B-BLU Fiber Breakout Kit (Beige-Medium) Fiber Breakout Kit (Black-Small) Fiber Breakout Kit (Yellow-Big) Fiber Breakout Kit (Yellow-Small) LTOC-BOK-M-BEI LTOC-BOK-S-BLK LTOC-BOK-S-YEL-A LTOC-BOK-S-YEL-B Fiber Tube LTOC-BOK-OV-XX

Fiber Optic Basic Tool Kit ::: Product Overview ::: The Fiber Optic Basic Tool Kit contained all the tools necessary for the fiber optic preparation requirement. The kit also complete with consumables may be ordered separately. Kit Contents: Quantity 1. Buffer Tube Stripper 1 unit 2. Kelvar Scissors 1 unit 3. Lint-Free Wipe Tissues 1 box 4. Utility Knife 1 unit 5. Cutting Plier 1 unit 6. Measuring Tape 1 unit 7. Multipurpose Screw Driver 1 unit 8. Jacket Stripper 1 unit 9. Tweezers 1 unit 10. Fiber Stripper 1 unit 11. Alcohol Bottle 1 unit 12. Cable Cutter 1 unit 13. Waste Fiber Storage Box 1 unit 14. Cable Marker 1 unit 15. Cable Ties 10 unit 16. Economy Tie Label 10 unit 17. Carrying Case 1 unit Optional Items : 1. High Precision Fiber Cleaver 2. Visual Fault Locator 3. Cable Sheath Slitter ::: Ordering Information ::: Part Number LTOC-TL-BK-KIT Description Fiber Tool Basic Tool Kit

High Precision Cleaver ::: Advantages ::: Automatic cleaving Low cleaving angle : 0.5º Life time: 48,000 times For both single and ribbon fiber High degree of hardness 8º angled cleaver is available ::: Specification ::: CI-01 Fiber Diameter 125um 80um, 125um 125um Coating Diameter 0.25-0.9mm 0.25-0.9mm 0.25-0.9mm Cleave Length 10-25mm (Single, Ribbon) 5-20mm (Single) 10-25mm (Single & Ribbon) 10-25mm (Single) Fiber Count Single & Ribbon (2-12) Single & Ribbon (2-24) Single & Ribbon (2-24) Cleaving Angle 0.5º (Single Fiber) 0.5º (Single Fiber) 0.5º (Single Fiber) Dimension 58mm X 55mm x 48mm 84mm x 65mm x 54mm 58mm x 66mm x 48mm Weight 260g 470g 290g Distinction Manual (Six Action) Automatic (one action) Automatic (one action) Waste basket CI-02 CI-03 ::: Ordering Information ::: Part Number LTOC-TL-FC-CI 01 LTOC-TL-FC-CI 02 LTOC-TL-FC-CI 03 Description Tool Fiber Cleaver CI-01 Tool Fiber Cleaver CI-02 Tool Fiber Cleaver CI-03

Fiber Optic Termination Kit ::: Product Overview ::: The Fiber Optic Termination Kit contained all the tools necessary for the fiber optic termination requirement. The kit also complete with consumables may be ordered separately. Kit Contents: Quantity 1. Buffer Tube Stripper 1 unit 2. Kelvar Scissors 1 unit 3. Lint-Free Wipe Tissues 1 box 4. Utility Knife 1 unit 5. Cutting Plier 1 unit 6. Measuring Tape 1 unit 7. Multipurpose Screw Driver 1 unit 8. Jacket Stripper 1 unit 9. Tweezers 1 unit 10. Fiber Stripper 1 unit 11. Alcohol Bottle 1 unit 12. Cable Cutter 1 unit 13. Syringes 1 unit 14. Polishing Jig ( SC or FC or ST ) 1 unit 15. Waste Fiber Storage Box 1 unit 16. Polishing Film 0.3 um 5 unit 17. Polishing Film 3.0 um 5 unit 18. Fiber Optic Crimping Tool 1 unit 19. Fiber Scribe Tool 1 unit 20. Polish Glass Plate 1 unit 21. Carrying Case 1 unit Optional Items : 1. Heat Curving Oven 2. Inspection Microscope 400X 3. Quick Cure Epoxy Set 4. Visual Fault Locator ::: Ordering Information ::: Part Number LTOC-TL-TER-KIT Description Fiber Tool Termination Kit

V-Groove Mechanical Splice V-Groove mechanical splice is used for temporary fiber connection for testing during cable drum test, R&D ornetwork testing. V-Groove mechanical Splice is a user friendly temporary splice device with low insertion loss. ::: Advantages ::: Higher surface tension between upper lid and base lid. The middles lid controls the tension of two side lids properly The average insertion loss is less than 0.5dB Available for 0.25mm and 0.9mm fiber type Optical devices application for temporary testing ::: Ordering Information ::: Part Number LTOC-TL-VGRO-2525 LTOC-TL-VGRO-2509 LTOC-TL-VGRO-0909 Description V-Groove Mechanical Splice for 0.25mm x 0.25mm Fiber V-Groove Mechanical Splice for 0.25mm x 0.9mm Fiber V-Groove Mechanical Splice for0.9mm x 0.9mm Fiber

Fiber Optical Cleaning Kit ::: Product Overview ::: Kit Contents: Quantity 1. Mini Foam Swabs (50) 1 unit 2. Kim Wipes 1 unit 3. Optic Preps 1 box 4. Alcohol Dispenser Bottle 1 unit ::: Ordering Information ::: Part Number LTOC-TL-CTP Description Fiber Tool Cleaning Kit

Other Products Racking - Equipment/Racks - Open System Racks - ODF/ MMF/ DDF Frames - Outdoor Equipment Cabinets - Customized Racking Fiber Optic - Data Cables - Work Station Solutions - Patch Panels - 110 Wiring System Coaxial - Coaxial Frames & Tools - Coaxial Connectors & Adapters - Coaxial Panels & Frames Voice - RF Connectors & Adapters - Feeder Clamp, Grounding Kits A t &RFP i P d t RF Magazine Arrestor - Back Mount Frame - DP Boxes - Tools - 75 Ohm to 120 Ohm Balin - IDC Type Balun - Balun Panels - Balun Pigtail