Outdoor Rigid Light L-ELR6K LEDs Line Hi IP6 Color management CIE - IP6 linear lighting - UV protected, semi diffused LED - kinds of length variation - Max. connectable length is 6.9 m - 4 Color variations - Easy dimming with 4 VDC low voltage power supply - High efficiency LED, lm/w
Outdoor Rigid Light L-ELR6K LEDs Line Hi IP6 Linear light with UV protected semi diffused polycarbonate cover Application Ideal for directing light on lines on the outside wall. FACADE Sapporo PARCO Location: JAPAN 68 L-ELR6K LEDs Line Hi IP6 HOTEL BAR GRANTiOS Location: JAPAN Architect office: Plus F Pacific Royal Court Minato Mirai Location: JAPAN
MADE IN JAPAN LEDs Line Hi IP6 Outdoor Outdoor Rigid Light L-ELR6K IP6 IP6 linear lighting LEDs Line Hi meet IP6 so that can be used as in a harsh environment such as under steps in a landscape area. UV protected, semi diffused LED Also, ideal for exposed line light on the outside wall. By applying ultraviolet deterioration prevention paint on the surface of LEDs Line Hi, it can be installed in places where direct sunlight strikes it. Semi diffused cover is maintaining high luminance for easy recognition when seeing it from a distance. However, if you look at it from a distance far, it looks like a single continuous line. kinds of length variation mm increments, min.40mm and max. 460 mm can be used for complicated shape installation. Max. connectable length is 6.9 m Recommended where the power supply installation location and the light fixture location are apart from each other. 4 Color variations 4000K, 30K, 3000K, K Easy dimming with 4 VDC low voltage power supply Dimmable by any signal such as 0-0 V, DMX, DALI, etc, if you use an adaptive dimming driver, with simple wiring. Ideal for dimming the whole in synchronization. Although it is unsuitable for design that requires individual control. High efficiency LED, lm/w Achieved. W/m, 80 lm/m and 0.3 lm/w using Nichia high efficiency LED package. Advanced waterproofing function design Comparison of the distance from wall 0mm IP6 connector (Japanese brand) Heatproof fluororesin cable covered with weather resistance cover Cylindrical extruded polycarbonate semi-diffused cover Three step protection structure - Double polycarbonate end cap - Encapsulated by silicon around cable and polycarbonate end cap - Silicon O ring for cable mm mm 0mm 300mm Line Graze IP6 EFRO IP65 Power LEDs Line IP65 LEDs Bar IP65 LEDs Line Hi IP6 mm LEDs Line Hi IP6 L-ELR6K 69
Outdoor Rigid Light ELR6K LEDs Line Hi IP6 Color management CIE Model No. L - ELR6K - M - 4 04 06 038 0 06 04 Length code 086 098 0 34 46 Lead wire J : Both ends lead wire E : One end lead wire Light source color 40 : 4000K 35 : 30K 30 : 3000K : K Light distribution curve -reference- L-ELR6K-098J(E)M-4 / illuminance angle 9 49 3 0 0 0 4 (lx) Specification Length code 0 098 46 Model No. Both ends lead wire L-ELR6K-0J M-4 L-ELR6K-098J M-4 L-ELR6K-46J M-4 One end lead wire L-ELR6K-0E M-4 L-ELR6K-098E M-4 L-ELR6K-46E M-4 Power consumption 3.9W/0mm.W/980mm.6W/460mm Lamp fitting length (L) 0mm 980mm 460mm Weight 49g(J) / 4g(E) 83g(J) / 8g(E) 35g(J) / 33g(E) Luminaire efficacy (K).0 lm/w 0.3 lm/w.9 lm/w Light source color = Device inventory * = Equivalent 40 4000K Ra 83 4 lm 840 lm 0 lm 35 30K Ra 83 40 lm 830 lm 40 lm 30 3000K Ra 83 400 lm 800 lm 0 lm K Ra 83 390 lm 80 lm 0 lm Contact us about 00K since they are made-to-order and have a Minimum Order Quantity. Size Variation Length code 04 06 038 06 04 086 0 34 Power consumption.0w.0w.9w 4.8W 5.8W 6.8W 8.W 9.6W 0.6W Lamp fitting length (L) 40mm 60mm 380mm 6mm 40mm 860mm mm mm 340mm Spec may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning. General Specification Input voltage DC4V Environment In & Outdoors (no condensation) IP6 Max. sets connectable 6.9m Ambient temperature / humidity -5 C 5 95%RH no condensation Storage temperature / humidity -5 55 C 5 85%RH no condensation Material (body) Polycarbonate Attachments Mounting clip Option parts Mounting clip, Power supply cable, Joint cable Dimmable Power Supplies Required COO Japan Max. connectable length per power supply LEDs Line Hi IP6 * = for multiple systems Normal operation Power supply 4.4m W switching power supply 8.8m* W switching power supply 3.m* W switching power supply External dimensions Both ends lead wire Front view 5.8 One end lead wire Front view 5.8 L±3 L±3 Prohibited installation places: - water directly fall on or pooled - liquids including chroline or chemicals fall on - high temperature and high humidity such as saunas and public bath - coastal areas which are affected by sea spray 3.8 4.6 Cross section view 4.6 3.8 Cross section view 0 L-ELR6K LEDs Line Hi IP6 Caution: Do not cut the lead wire of outdoor product at a job site. Please do appropriate treatment for the lead wire and connector of the terminal of outdoor LED fixture.
Optional parts Mounting clip for LEDs Line Hi IP6 Attachment Option Parts Model No : ELR-F Used for installing the light appliance. Attachment pcs for 40mm to 380mm 3 pcs for 0mm to 860mm 5 pcs for 980mm to 460mm Option Parts pcs/ bag Top view Side view 0 3. 4.4 8 3.8 4.4 3.8 Outdoor Outdoor Rigid Light L-ELR6K IP6 Power supply cable EPYJ *mm Option Parts Required *(Length:mm) 0 0 00 4000 Model No. EPYJ-305-K EPYJ-30-K EPYJ-3-K EPYJ-340-K Top view (+ side) 4.6 4.3 Front view (40) Side view L 6.5 6. Check the label on the DC + side for polarity. Joint cable EEJJ *mm Option Parts *(Length:mm) 0 0 00 4000 6000 Model No. EEJJ-305 EEJJ-30 EEJJ-3 EEJJ-340 EEJJ-360 Top view Front view 4.6 5.8 L 6.5 Side view 6. Line Graze IP6 EFRO IP65 Power LEDs Line IP65 LEDs Bar IP65 LEDs Line Hi IP6 LEDs Line Hi IP6 L-ELR6K
Installing the product lamp Mounting screw Mounting clip Connector Power source side Connector Feed side LED the protective paper of the double-sided tape Screw hole of 4.mm in diameter LED Insert until it is locked Fix the clip between the two LEDs Remove the protective paper of the double-sided tape and temporarily fix the lamp to the installation site. Cautions Not suitable to be fixed with a double-sided tape or adhesive. Do not use the double-sided tape except for fixing the lamp temporarily. Attachment Option Parts Mounting clip for LEDs Line Hi IP6 (ELR-F) Fix the lamp on the installation site with the attached Mounting clips and screws (round head screw M3. x 6). Join the connectors. Make sure that they are correctly joined. Use the one side connector product (L-ELR6K-xxxE*M-4) for the end of connection. Cautions Do not cut off the connectors to use them. The waterproof performance will be lost. In order to avoid the exposure to direct sunlight, hide the connectors behind the lamp, etc. Cautions Make sure that the installation site is flat. Before the construction, make sure to remove from the installation site any oil content, water drop, dust and so on. When installing the product downward or in a vertical direction, pay full attention in order to avoid dislocation, damage due to a fall and so on. Do not scratch or incise the lead wire. The waterproof performance will be lost. Make sure to insert the connector until it is completely locked. Otherwise it can lead to the lowering of the waterproof performance and contact failure. Minimum size for construction Please keep the following size in order to avoid the temperature increase of the lamp. Any size that is smaller than the following may shorten the lamp's life. Cove lighting Sideways Sealed (the size is the same for both upward and downward) Over 40 Over Over Over Under 35 Over 40 Over 30 unit of measure=mm Under 30 L-ELR6K LEDs Line Hi IP6
Connecting to the power supply Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem. System configuration diagram When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple. Outdoor Outdoor Rigid Light L-ELR6K IP6 Max. connectable length depends on the wattage of the power supply. Max. length per circuit of LEDs Line Hi IP6 is 6.9m. If it exceeds 6.9 m, please split into multiple circuits. Max. distance from the power supply to the end of LED fixture is 0.9 m. Power supply DC4V Up to 4m LED fixture max. 6.9m Circuit Circuit Circuit 3 Option Parts Required Power supply cable EPYJ 0mm, 0mm, 00mm, 4000mm (EPYJ-305-K, EPYJ-30-K, EPYJ-3-K, EPYJ-340-K) Direct horizontal surface light intensity distribution chart L-ELR6K-098J(E)40M-4 Light source color 4000K Brightness 3 cd Luminous flux 840 lm Color rendering index Ra 83 L-ELR6K-098J(E)35M-4 Light source color 30K Brightness 0 cd Luminous flux 830 lm Color rendering index Ra 83 L-ELR6K-098J(E)30M-4 Light source color 3000K Brightness cd Luminous flux 800 lm Color rendering index Ra 83 L-ELR6K-098J(E)M-4 Light source color K Brightness 9 cd Luminous flux 80 lm Color rendering index Ra 83 / illuminance angle 3 53 3 3 0 0 0 3 4 (lx) / illuminance angle 0 5 3 3 0 0 0 3 4 (lx) / illuminance angle 0 0 3 0 (lx) 4 / illuminance angle 9 49 3 0 0 0 4 (lx) Line Graze IP6 EFRO IP65 Power LEDs Line IP65 LEDs Bar IP65 LEDs Line Hi IP6 LEDs Line Hi IP6 L-ELR6K 3
Singapore World HQ 5A Tanjong Pagar Road, Singapore 08843 Tel : +65-69-40 E-mail : info@luci.co.jp Hong Kong Marketing Office Room 80, 8/F, Kwai Hung Holdings Centre, 89 King's Road, North Point,Hong Kong Tel : +85-9-846 E-mail : info@luci.co.jp Dubai Marketing Office 5WA 33, DAFZA, Dubai, United Arab Emirates Tel: +9-54-446-03 E-mail : info@luci.co.jp Group company Tokyo Japan Regional HQ Akasaka Bldg. 4F, 4-3-3, Akasaka, Minato-ku, Tokyo 0-005, Japan Tel : +8-3-63-409 E-mail : info@luci.co.jp Osaka Office Yotsubashinakano Bldg. 3F, --4, Minamihorie, Nishi-ku, Osaka-shi, Osaka 5-005, Japan Tel : +8-6-60-5 E-mail : info@luci.co.jp Group company Shanghai China mainland Regional HQ : Rm.804, South Building, 300 Xuanhua Rd., Changning District, Shanghai(00)PRC. Tel : +86--538-95 E-mail : info@luci.co.jp Beijing Office : Rm.030 Building0, (Qingnian Rd) Qingniangongshe., Chaoyang North Rd, Chaoyang District, Beijing(06)PRC. Tel : +86-0-6556-954 E-mail : info@luci.co.jp Partner Company Korea SANSHO Korea CO.,LTD. KOREA SANSHO SHOJI CO.,LTD. #, 36, Teheran-ro 8gil, Gangnam-gu, Seoul, 0664, Korea Tel: +8--8-54