COHU, INC. Elec tron ics Di vi sion In stal la tion and Op era tion In struc tions 2200 SE RIES NTSC/YC, PAL/YC, AND RGB COLOR CAM ERAS This de vice com plies with part 15 of the FCC Rules. Op era tion is sub ject to the fol low ing two con di tions: (1) This de vice may not cause harm ful in ter fer ence, and (2) this de vice must ac - cept any in ter fer ence re ceived, in clud ing in ter fer - ence that may cause un de sired op era tion. 3912 CALLE FORTUNADA SAN DI EGO, CA 92123-1827 PHONE (858) 277-6700 FAX (858) 277-0221 6X- 972(A) Change 3
2200 COLOR CAMERA NTSC AND PAL NOTE: This equip ment has been tested and found to com ply with the lim its for a Class B digi tal de vice, pur - su ant to part 15 of the FCC Rules. These lim its are de signed to pro vide rea son able pro tec tion against harm ful in ter fer ence in a resi den tial in stal la tion. This equip ment gen er ates, uses, and can ra di ate ra dio fre - quency en ergy and, if not in stalled and used in ac cor dance with the in struc tions, may cause harm ful in ter - fer ence to ra dio com mu ni ca tions. How ever, there is no guar an tee that in ter fer ence will not oc cur in a par ticu lar in stal la tion. If this equip ment does cause harm ful in ter fer ence to ra dio or tele vi sion re cep tion, which can be de ter mined by turn ing the equip ment off and on, the user is en cour aged to try to cor rect the in ter fer ence by on or more of the fol low ing meas ures: Re ori ent or re lo cate the re ceiv ing an tenna. In crease the sepa ra tion be tween the equip ment and re ceiver. Con nect the equip ment into an outlet on a cir cuit dif fer ent from that to which the re ceiver is con nected. Con sult the dealer or an ex pe ri enced ra dio/tv tech ni cian for help. UL listed to Stan dard 1409, Video Equip ment, UL File Num ber E117248(S) Com plies with CE CISPR- 22, Class B; EN 55022, Class B; EN 50081-1; EN 50082-1 Com plies with VDE, 0871, Class B Re quire ments Shutter Switch Location SPEED Note 1 Note 2 SWITCH 4 3 2 1 1/125 1/250 1/500 1/1,000 1/2,000 1/4,000 1/10,000 = ON No te1. Shut ter off. NTSC 1/60; PAL 1/50 Note 2. Flick er less: NTSC 1/100; PAL 1/120 Shut ter Switch Set tings Lens Connector Pin Functions Power Connector Pin Functions 2 Change 2 6X-972(A)
2200 COLOR CAMERA NTSC AND PAL CON TROL NAME GAIN con trol group AUTO/MAN switch (auto/man ual) GAIN con trol (20 db) WHT BAL Con trol Group RMT/LCL switch (re mote/lo cal) AUTO/MAN switch (auto/man ual) WHT BAL con trol (white bal ance) CON TROL FUNC TION Pro vides meth ods of gain con trol for the Cam era. AUTO se lects in ter nal agc (auto mat ic gain con trol). MAN se lects the rear panel mounted GAIN con trol to set Cam era gain (see be low). GAIN con trols the video gain of the Cam era when the re lated LCL and MAN modes have been se lected. Pro vides meth ods of con trol ling color re sponse of the Cam era. RMT ac ti vates the AUX (aux il iary) con nec tor func tions for the ex ter nal white bal ance con trol, typi cally an auto/man ual se lect switch and a po ten ti ome ter. LCL se lects the rear panel AUTO/MAN UAL switch (see be low). AUTO se lects in ter nal Cam era cir cuits for auto mat ic con trol of white bal ance (color re sponse). MAN ac ti vates the re lated rear panel mounted WHT BAL con trol (see be low). WHT BAL (white bal ance) con trols color re sponse of the Cam era when the re lated LCL and MAN modes have been se lected. SYNC IN switch (GL op tion) Se lects ei ther 75 ohms or HIgh im ped ance for the AUX con nec tor gen lock in put. WHT BAL Set Group (Sam ple/hold white bal ance op tion) SET switch OK in di ca tor Rear Panel Controls De press to es tab lish sam ple/hold white bal ance set ting In di ca tor il lu mi nates to in di cate that white bal ance has been es tab lished JB1 NAME LO CA TION FUNC TION Digi tal Elect. Iris Board Turns board on and off JB1 RGB Board Add sync to green out put when in stalled R7 Gen lock Board Ad justs po si tion of ver ti cal in the out put video in re la tion to in put R20 (OP TION) Main Board Sets cam era gain when re lated switch S1 is in MAN R160 Main Board Ad justs setup. Typi cally set for 7.5 IRE units above blank ing S1 (OP TION) Main Board Se lects ei ther man ual gain con trol (via R20) or agc S4 Digi tal Elect Iris Board Internal Adjustments and Settings Se lects shut ter speed set tings. See re lated ta ble. 6X-972(A) 3
2200 COLOR CAMERA NTSC AND PAL 6X-972(A) 5