SMT-SWBM-Nxxxx Surface Mount LED Indicator Data Sheet Description The Long-Life White PL-4 SMT LEDs is the latest extension to our White PL-4 packages where besides having higher flux output, the Long-Life White PL-4 is designed to work under a wide range of environment condition, with reliable and stable performance. The structure and materials used for Long-Life White PL-4 enable the packages to endure minimal degradation and hence consistent performance throughout the product life time. Moreover, the Long-Life White PL-4 SMT LEDs is a 8-binned product for color, an enhance feature from the previous PL-4 white who is binned with 6 color binning only. These tigher color binning will ensure better color grouping with better uniformity. The Long-Life White PL-4 SMT LEDs is suitable to be used in Interior utomotive application, Electronics Signs and Signals application. Besides that, the super wide viewing angle at 12 makes these LEDs ideally suited for instrument cluster panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these super high brightness LEDs can be used in localized area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. The white color backlighting is suitable to backlight color LD screens in applications such as GPS (global positioning system) screen in cars. To facilitate easy pick and place assembly, the LEDs are packed in EI-compliant tape and reel. Every reel will be shipped in single intensity and color bin, to provide close uniformity. These LEDs are compatible with IR solder reflow process. Features Industry standard PL-4 High reliability LED package Long Life, up to 5, hours at 25 High brightness using InGaN dice technologies High optical efficiency Super wide viewing angle at 12 Tight white color binning 8 bins vailable is 8mm carrier tape on 7-inch reel Stabile & onsistent performance with minimum degradation with Silicone Encapsulation JEDE MSL 2a pplications Interior & exterior automotive Instrument panel backlighting entral console backlighting Navigation and audio system backlighting Dome/Map lighting Push button backlighting Number plate illumination Rear reverse lamp indicator Electronic signs and signals Decorative lighting Office automation, home appliances, industrial equipment Front panel backlighting Push button backlighting UTION: SMT-SWBM-Nxxxx LEDs are lass 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to vago pplication Note N-1142 for additional details.
Package Drawing 2.8 ±.2 2.2 ±.2 1.9 ±.2.1 TYP..8 ±.1 3.2 ±.2 3.5 ±.2.8 ±.3 THODE MRKING.7 ±.1.5 ±.1 NOTES: LL DIMENSIONS IN mm. ELETRIL ONNETION BETWEEN LL THODES IS REOMMENDED. Table 1. Device Selection Guide olor Part Number Min. I V (mcd) Typ. I V (mcd) Max. I V (mcd) Test urrent (m) Dice Technology White SMT-SWBM-NU83 56. 11. 14. 3 InGaN 1. The luminous intensity I V, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. I V tolerance ±12% Part Numbering System S M T S X1 B M NX2 X3 X4 X5 Packaging Option olor Bin Selection Intensity Bin Limit Intensity Bin Selection LED hip olor 2
Table 2. bsolute Maximum Ratings (T = 25 ) Parameters SMT-SWBM-Nxxxx D Forward urrent [1] 5 m Peak Forward urrent [2] 3 m Power Dissipation 215 mw Reverse Voltage 4 V Junction Temperature 125 Operating Temperature - 4 to + 11 Storage Temperature - 4 to + 11 1. Derate linearly as shown in Figure 4. 2. Duty Factor =.5%, Frequency = 5Hz. Table 3. Optical haracteristics (T = 25 ) Typical hromaticity oordinates [1] Viewing ngle 2 ½ [2] (Degrees) Luminous Efficiency he (lm/w) Part Dice olor Number Technology x y Typ. Typ. Typ White SMT-SWBM-Nxxxx InGaN.318.318 12 27 2.7 1. The chromaticity coordinates are derived from the IE 1931 hromaticity Diagram and represent the perceived color of the device. 2. ½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 3. V is the total luminous flux output as measured with an integrating sphere at mono pulse conditions. Total Flux [3] / Luminous Intensity V (lm) / I V (cd) Table 4. Electrical haracteristics (T = 25 ) Part Number Forward Voltage V F (Volts) @ I F = 3 m [1] Typ. Max. Min. Reverse Voltage V R @ 1 SMT-SWBM-Nxxxx 3.2 3.8 4 11 1. Tolerance = ±.1V Thermal Resistance R J-P ( /W) Table 5. Targeted Mean Lifetime onditions Mean Luminous Maintenance (L5) Unit I F = 25m T = 85 25, Operating hours I F = 25m T = 25 5, Operating hours 1. The typical data or calculated correlations can only reflect statistical figure, hence can only be used for reference only 2. ll data shown based on Thermal Resistance R J =3 /W. 3. Due to technical improvement,vago technologies reserved right to change the typical data without any further notice. 3
RELTIVE INTENSITY 1..9.8.7.6.5.4.3.2.1. 38 43 48 53 58 63 68 73 78 WVELENGTH - nm Figure 1. Relative Intensity Vs. Wavelength FORWRD URRENT - m 6 5 4 3 2 1 2 4 6 FORWRD VOLTGE - V Figure 2. Forward urrent Vs. Forward Voltage RELTIVE LUMINOUS INTENSITY (NORMLIZED T 3 m) 1.6 1.2.8.4 1 2 3 4 5 55 D FORWRD URRENT - m Figure 3. Relative Intensity Vs. Forward urrent MXIMUM FORWRD URRENT - m 6 5 4 3 2 1 2 4 6 8 1 12 MBIENT TEMPERTURE - Figure 4a. Maximum Forward urrent Vs. mbient Temperature. Derated Based on T JMX = 125, R J =3 /W MXIMUM FORWRD URRENT - m 6 5 4 3 2 1 2 4 6 8 1 12 SOLDER POINT TEMPERTURE ( ) Figure 4b. Maximum forward current vs. solder point temperature. Derated Based on T JMX = 125, R JP =11 /W NORMLIZED INTENSITY 1.9.8.7.6.5.4.3.2.1-9 -6-3 3 6 9 NGULR DISPLEMENT - DEGREES Figure 5. Radiation Pattern 4
1-3 SE. 255-26 ID Note: Diameter "ID" should be bigger than 2.3mm TEMPERTURE 217 2 15 3 /SE. MX. 3 /SE. MX. 6 /SE. MX. 6-12 SE. 1 SE. MX. Figure 6. Recommended Pick and Place Nozzle Size TIME (cc. to J-STD-2) Note: For detail information on reflow soldering of vago surface mount LEDs, do refer to vago pplication Note N 16 Surface Mounting SMT LED Indicator omponents Figure 7. Recommended Pb-free Reflow Soldering Profile SOLDER-RESIST 4.5 3.8 3.4 4.5 8.5 PD LERNE 1.1.5 4.5.2 8.5 PD LERNE REPRESENTS ELETRIL ONNETION BETWEEN THE THODE PDS Figure 8. Recommended Soldering Pad Pattern 5
TRILER OMPONENT LEDER 2 mm MIN. FOR Ø18 REEL. 2 mm MIN. FOR Ø33 REEL. 48 mm MIN. FOR Ø18 REEL. 96 mm MIN. FOR Ø33 REEL. USER FEED DIRETION Figure 9. Tape Leader and Trailer Dimensions Ø1.5 +.1 4 ±.1 4 ±.1 2 ±.5 1.75 ±.1 2.29 ±.1 3.5 ±.5 8 +.3.1 3.8 ±.1 3.5 ±.1 Ø1 +.1.229 ±.1 8 LL DIMENSIONS IN mm. Figure 1. Tape Dimensions USER FEED DIRETION THODE SIDE PRINTED LBEL Figure 11. Reeling Orientation 6
Moisture Sensitivity This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-2. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to vago pplication Note N535 Handling of Moisture Sensitive Surface Mount Devices for details.. Storage before use Unopen moisture barrier bag (MBB) can be stored at <4 /9%RH for 12 months. If the actual shelf life has exceeded 12 months and the HI indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. It is not recommended to open the MBB prior to assembly (e.g. for IQ). B. ontrol after opening the MBB The humidity indicator card (HI) shall be read immediately upon opening of MBB. The LEDs must be kept at <3 /6%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours.. ontrol for unfinished reel For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. ontrol of assembled boards If the PB soldered with the LEDs is to be subjected to other high temperature processes, the PB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: 1% is Not blue and 5% HI indicator turns pink. The LEDs are exposed to condition of >3 /6%RH at any time. The LEDs floor life exceeded 672 hours. Recommended baking condition: 6±5 for 2 hours. Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. s silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly of handling, the unit should b e held on the body only. Please refer to vago pplication Note N 5288 for detail information. 7
Intensity Bin Select (X 2 X 3 ) Individual reel will contain parts from one half bin only X 2 Min I V Bin X 3 Full Distribution 2 2 half bins starting from X 2 1 3 3 half bins starting from X 2 1 4 4 half bins starting from X 2 1 5 5 half bins starting from X 2 1 6 2 half bins starting from X 2 2 7 3 half bins starting from X 2 2 8 4 half bins starting from X 2 2 9 5 half bins starting from X 2 2 Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) N1 28.5 35.5 N2 35.5 45. P1 45. 56. P2 56. 71.5 Q1 71.5 9. Q2 9. 112.5 R1 112.5 14. R2 14. 18. S1 18. 224. S2 224. 285. T1 285. 355. T2 355. 45. U1 45. 56. U2 56. 715. V1 715. 9. V2 9. 1125. W1 1125. 14. W2 14. 18. Tolerance of each bin limit = ± 12% olor Bin Select (X 4 ) Individual reel will contain parts from one full bin only. X 7 Full Distribution 1 and 2 only B 2 and 3 only 3 and 4 only D 4 and 5 only E 5 and 6 only F 6 and 7 only G 1, 2 and 3 only H 2, 3 and 4 only J 3, 4 and 5 only K 4, 5 and 6 only L 5, 6 and 7 only M 1, 2, 3 and 4 only N 2, 3, 4 and 5 only P 3, 4, 5 and 6 only Q 4, 5, 6 and 7 only R 1, 2, 3, 4 and 5 only S 2, 3, 4, 5 and 6 only T 3, 4, 5, 6, and 7 only U 1, 2, 3, 4, 5 and 6 only V 2, 3, 4, 5, 6 and 7 only Z Special olor Bin olor Bin Limits Bin ID Limits (hromaticity oordinates) x.296.291.31.313 1 y.259.268.297.284 x.291.285.37.31 2 y.268.279.312.297 x.313.31.33.33 3 y.284.297.33.31 x.31.37.33.33 4 y.297.312.347.33 x.33.33.338.352 5 y.31.33.342.344 x.33.33.347.345 6 y.33.347.371.352 x.352.338.364.36 7 y.344.342.38.357 x.345.347.367.364 8 y.352.371.41.38 Tolerance of each bin limit = ±.2. 8
Packaging Option (X 5 ) Option Test urrent Package Type Reel Size 3 3 m Top Mount 7 inch V F Bin Limits Bin ID Min. Max. S2 2.6 3.2 S3 3.2 3.8 Tolerance of each bin limit = ±.1V olor oordinates hart Y-OORDINTE X-OORDINTE For product information and a complete list of distributors, please go to our web site: www.avagotech.com vago, vago Technologies, and the logo are trademarks of vago Technologies in the United States and other countries. Data subject to change. opyright 25-211 vago Technologies. ll rights reserved. Obsoletes V1-443EN V2-443EN - September 3, 211