Alchemist Platinum Motion Compensated Conversion Platform

Similar documents
Dual-channel Linear Motion Adaptive Format Converter and Synchronizer

Single-channel Motion Compensated Standards Converter. Single-channel Motion Compensated Standards Converter with Two IQ Module Slots

Operator s Manual. KudosPro MC500. Single-channel Motion Compensated Standards Converter.

HD5200 High Definition Upconverter

Ukon Universal Conversion Platform

Operator s Manual. Kudos LC300. Kudos LC350. Single Channel Frame Rate Converter

Mach HD. HD & SD Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion

User Manual IQLDK30. 3G/HD/SD-SDI Logo Inserter and Keyer.

CVR700 Standards Converter. SD & HD SDI Standards Converter with Synchronizer, Up, Down and Cross Conversion

User Manual IQMIX25/26 IQMIX40/41. 3G/HD/SD-SDI Multi-channel 10/25GbE IP Transceiver. 3G/HD/SD-SDI Multi-channel 10/40GbE IP Transceiver

Operator s Manual IP Interface Supplement

Alchemist Ph.C HD Motion Compensated Conversion Platform

Quasar Ph.C Motion Compensated HD Up Converter

RPAN. Router Control Panel

CDV07. Analog video distribution amplifier(s)

ACUBRITE 23 SS. Manual. Stainless Steel Chassis 23" LCD Display. Content

Operating Instructions

DAC20. 4 Channel Analog Audio Output Synapse Add-On Card

TeamWork 601 Kit Installation Guide

Trusted 40 Channel 120 Vac Digital Input FTA

FD Trinitron Colour Television

Model 1421 Distribution Amplifier

Trusted 40 Channel 120 Vac Digital Input FTA

USER MANUAL. 27 Full HD Widescreen LED Monitor L270E

Installation Guide. Cellular Plug-in for Inverters with SetApp. Version 1.1

T L Audio. User Manual C1 VALVE COMPRESSOR. Tony Larking Professional Sales Limited, Letchworth, England.

USER MANUAL Full HD Widescreen LED Monitor L215ADS

Quick Reference Guide

USER MANUAL Full HD Widescreen LED Monitor L236VA

USER MANUAL Full HD Widescreen LED Monitor L215IPS

User Instruction Manual IQSDA30/IQSDA32. Intelligent Reclocking High Performance HD-SDI/SD-SDI Distribution Amplifiers. snellgroup.

.Power Distribution Center. PD-1. Instruction Manual

DH551C/DH550C/DL550C Double Sided Display User Manual

MASTR II BASE STATION 12/24V POWER SUPPLY 19A149979P1-120 VOLT/60 Hz 19A149979P2-230 VOLT/50 Hz

MOONRING MULTIPLES INSTALLATION INSTRUCTIONS MOONRING MULTISTAK TM STACKED CANOPY. A nd Avenue, Unit 1 Oakland,

Color TFT LCD Monitor The Art of Surveillance

USER MANUAL. 27 Full HD Widescreen LED Monitor L27ADS

TABLE OF CONTENTS Important Safety Instructions Package Content Setting Up the Display Trouble shooting Specifications Product Dimensions

3G Multi-Rate Digital Video Optical Transmitter/Receiver/ Transceiver/Repeater. Installation and Operations. Manual

17 19 PROFESSIONAL LCD COLOUR MONITOR ART

USER MANUAL. 22" Class Slim HD Widescreen Monitor L215DS

Evolution Digital HD Set-Top Box Important Safety Instructions

TR6102HD HDTV/DVD/COMPONENT VIDEO TO RGBHV TRANSCODER USER S GUIDE

Model: S-4904T/R. Wireless HD Transmission System. User Manual. Please read this User Manual throughout before using.

NS-3 RF Noise Source Operation Manual

P XGA TFT Monitor. User s Manual

TeamWork Kits Installation Guide

GE Interlogix Fiber Options S700V & S702V. Instruction Manual FIBER-OPTIC VIDEO TRANSMISSION SYSTEM

OPERATION MANUAL. USF-402AADC Audio Analog Digital Converter. 1 st Edition

DA IN 1-OUT LINE DRIVER WITH EQUALIZATION + AUDIO USER S GUIDE

User Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor

PREAMPLIFIER INTRODUCTION INSTRUCTIONS FOR USE. Thank you for purchasing the Musical Fidelity A3 CR remote control preamplifier.

Table of Contents FCC COMPLIANCE STATEMENT... 4 WARNINGS AND PRECAUTIONS... 4 WARRANTY... 5 STANDARD WARRANTY... 5 TWO YEAR WARRANTY... 5 DISPOSAL...

Q-TV2. User Manual. for Screens

SUPERSCALE Multi-Format to HDMI Scaler

Contents. Disclaimer of Product and Services

Trusted 40 Channel Analogue Input FTA

HD Digital Set-Top Box Quick Start Guide

PLL1920M LED LCD Monitor

Six-Channel TDM Multiplexers for 3G, HD, SDI, and ASI. Installation and Operations. Manual

User Manual MODEL: KKF1500-PCAP. True FLAT P-CAP LCD Monitor. Installation Guide. 15 True FLAT P-CAP Touch LCD Monitor

Warning...1 Safety Precaution...3

Kramer Electronics, Ltd. USER MANUAL VM-20HD. Dual 1:10 HD/SD SDI Distribution Amplifier


AES-404 Digital Audio Switcher/DA/Digital to Analog Converter

19 / 20.1 / 22 WIDE SCREEN TFT-LCD MONITOR

LA1500R USER S GUIDE.

HD/SD-SDI to HDMI Converter DAC-8P Quick Start Guide

It will cause malfunction if the monitor is operating with unspecified power supply

MON3-2W/HR MON4-2W/HR (Document P/N Rev-B)

Operating Manual. Mark Levinson Nº25 Dual Monaural Phono Preamplifier. Madrigal Audio Laboratories, Inc. 1

Operating Manual (Edition 04/2004) sinamics. Line Reactors SINAMICS G130

DA1909 COMPUTER VIDEO LINE DRIVER WITH EQUALIZATION USER S GUIDE

TeamWork Kit Installation Guide

USER MANUAL. 28" 4K Ultra HD Monitor L28TN4K

Spectra Batten (Order code: LEDJ95)

CLUX-SDI2VS. SDI to PC/HD Scaler with Audio. Operation Manual CLUX-SDI2VS

Electro Magnetic Compatibility (EMC) Warning. Important notes for users in the U.K. FCC declaration. Caution. Fuse

ORPHEUS ZERO U S E R M A N U A L

PRO-SDIVGA. SDI Extender with PC/HD Scaler & Audio OPERATION MANUAL

QCA9-33 Active Combiner

HD/SD- SDI to VGA Converter DAC-60 Quick Start Guide

Dragonfly Quad. User Manual V1.4. Order code: EQLED101

6X3W RGB LEDS PROJECTOR FOR PROFESSIONAL TRUSSES USER GUIDE / Version 1

Modular Block Converter Systems

P-2 Installing the monitor (continued) Carry out as necessary

IN1503 COMPONENT VIDEO TO RGB TRANSCODER IN1503 OPERATION MANUAL

ZVOX AccuVoice TV Speaker Model AV203

TLM 170 / D / M / MD 17 Widescreen LCD TFT Monitor

TeamWork Kits Installation Guide

PH-1. Italian MM & MC Phono Preamplifier OWNER S MANUAL

TRANSCENSION 6-CHANNEL DMX DIMMER PACK (order code: BOTE40) USER MANUAL

Instructions for Use P.160-AP-8 (13/8) P.160-CP-8 (13/8) P.160-CP-12 (13/12) P.160-CP-16 (13/16)

Model 5240 Digital to Analog Key Converter Data Pack

DISTRIBUTION AMPLIFIER

9" B/W MONITOR CEM-09/09A-2 12" B/W MONITOR CEM-12/12A-2 OPERATION MANUAL

LED TV MODEL NO.: NE22K5BG. Please read this manual carefully before installing and operating the TV. Keep this manual handy for further reference

Concert Series ORDERCODE D3470 ORDERCODE D3471 ORDERCODE D3472 D3470 D3471 D3472

SPECIAL SPECIFICATION 6911 Fiber Optic Video Data Transmission Equipment

SYMBOLS USED ON THE RECEIVER... 3 SAFETY INSTRUCTIONS... 4 I.GENERAL INFORMATION...

Transcription:

Alchemist Platinum Motion Compensated Conversion Platform Installation Manual October 2005 www.snellwilcox.com Snell & Wilcox td., Southleigh Park House, astleigh Road, Havant, Hants, PO9 2P, United Kingdom. For General nquiry s contact: Tel: +44 (0) 2392 489000 Fax: +44 (0)23 9245 1411 For Technical assistance contact: Tel: +44 (0) 2392 489058 Fax: +44 (0) 2392 489057 Web: http://www.snellwilcox.com/support Ftp: ftp://ftp.snellwilcox.com/support ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.1

ACHMIST PATIUM SCTIO 0 xplanation of Safety Symbols GB rklärung der Sicherheitssymbole D This symbol refers the user to important information contained in the accompanying literature. Refer to manual. Dieses Symbol weist den Benutzer auf wichtige Informationen hin, die in der begleitenden Dokumentation enthalten sind. This symbol indicates that hazardous voltages are present inside. o user serviceable parts inside. This unit should only be serviced by trained personnel. Safety Warnings CAUTIO RISK OF CTRIC SHOCK DO OT RMOV COVRS O USR SRVICAB PARTS RFR SRVICIG TO QUAIFID PRSO OY Servicing instructions where given, are for use by qualified service personnel only. To reduce risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified personnel. To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Always ensure that the unit is properly earthed and power connections correctly made. This equipment must be supplied from a power system providing a PROTCTIV ARTH connection and having a neutral connection which can be reliably identified. The power outlet supplying power to the unit should be close to the unit and easily accessible Power connection in countries other than the USA The equipment is normally shipped with a power cable with a standard IC moulded free socket on one end and a standard IC moulded plug on the other. If you are required to remove the moulded mains supply plug, dispose of the plug immediately in a safe manner. The colour code for the lead is as follows: GR/YOW lead connected to (Protective arth Conductor) BU lead connected to (eutral Conductor) BROW lead connected to (ive Conductor) Caution If the unit has two mains supply inputs ensure that both power cords are plugged into mains outlets operating from the same phase. égende : Ce symbole indique qu'il faut prêter attention et se référer au manuel. Ce symbole indique qu'il peut y avoir des tensions électriques à l'intérieur de l'appareil. e pas intervenir sans l'agrément du service qualifié. Précaution d'emploi : ATTTIO RISQU D CHOC CTRIQU PASRTIRR COUVRC PAS ITRVIR SAS 'AGRMT DU SRVIC QUAIFI Pour réduire le risque de choc électrique, ne pas exposer l'appareil dans un milieu humide. Toujours s'assurer que l'unité est correctement alimentée, en particuliers à la liaison à la terre. a source électrique de cet équipement doit posséder une connexion à la terre, ainsi qu'une liaison «neutre» identifiable. a prise électrique qui alimente l'appareil doit être proche de celle-ci et accessible. Câble secteur de pays autres que les tats-unis 'équipement est livré avec un câble secteur au standard IC, moulé mâle/femelle. Si vous souhaitez changr la prise mâle de votre cordon, voici les codes couleurs des fils : e fil VRT/JAU est connecté à T (Terre) e fil BU est connecté à (eutre) e fil MARRO est connecté à P (Phase) Attention si l'appareil a 2 alimentations, s'assurer que les cordons soient branchés sur la même phase. es procédures de maintenance ne concernent que le service agréé. Afin de réduire le risque de choc électrique, il est recommandé de se limiter aux procédures d'utilisation, à moins d'en être qualifié. Pour toute maintenance, contacter le service compétent. P T Connecteur F T Prise P Dieses Symbol zeigt an, dass gefährliche Spannung vorhanden ist. s befinden sich keine vom Benutzer zu wartenden Teile im Geräteinneren. Dieses Gerät sollte nur von geschultem Personal gewartet werden Sicherheits-Warnhinweise ACHTUG Gefahr von lektroschocks. Abdeckungen nicht entfernen Keine vom Benutzer zu wartende Teile Wenden Sie sich ausschließlich an qualifiziertes Personal Um das Risiko eines lektroschocks zu reduzieren, setzen Sie das Gerät weder Regen noch Feuchtigkeit aus. Stellen Sie immer sicher, dass das Gerät ordnungsgemäß geerdet und verkabelt ist. Dieses quipment muss an eine etzsteckdose mit Schutzleiter angeschlossen werden und einen zuverlässig identifizierbaren ullleiter haben. Die etzsteckdose sollte nahe beim Gerät und einfach zugänglich sein. etzanschluss in anderen ändern als der USA Das quipment wird im ormalfall mit einem etzkabel mit Standard IC Anschlussbuchse und einem Standard IC Anschlussstecker geliefert. Sollten Sie den angeschweißten Stecker auswechseln müssen, entsorgen Sie diesen bitte umgehend. Die farbliche Belegung des etzkabels ist wie folgt: GRÜ GB = Schutzleiter BAU = ulleiter BRAU = P = Phase Die angeführten Service-/Reparatur-Anweisungen sind ausschließlich von qualifiziertem Service-Personal auszuführen. Um das Risiko eines lektroschocks zu reduzieren, führen Sie ausschließlich die im Benutzerhandbuch eschriebenen Anweisungen aus, es sei denn, Sie haben die entsprechende Qualifikation. Wenden Sie sich in allen Service-Fragen an qualifiziertes Personal. Achtung: Wenn das Gerät zwei Anschlussbuchsen hat, stellen Sie bitte sicher, dass beide etzkabel mit der selben Phase in die etzsteckdose gesteckt werden. = Phase = Schutzleiter = ulleiter xplicación de los Símbolos de Seguridad = ulleiter Éste símbolo refiere al usuario información importante contenida en la literatura incluida. Referirse al manual. = Schutzleiter Éste símbolo indica que voltajes peligrosos están presentes en el interior. o hay elementos accesibles al usuario dentro. sta unidad sólo debería ser tratada por personal cualificado. Advertencias de Seguridad RISGO D CHOQU CTRICO O QUITAR AS PROTCCIOS MTOS O ACCSIBS A USUARIO. SRVICIO SOAMT A PRSOA CUAIFICADO = Phase as instrucciones de servicio cuando sean dadas, son sólo para uso de personal cualificado. Para reducir el riesgo de choque eléctrico no llevar a cabo ninguna operación de servicio aparte de las contenidas en las instrucciones de operación, a menos que se esté cualificado para realizarlas. Referir todo el trabajo de servicio a personal cualificado. Para reducir el riesgo de choque eléctrico, no exponer este equipo a la lluvia o humedad. Siempre asegurarse de que la unidad está propiamente conectada a tierra y que las conexiones de alimentación están hechas correctamente. ste equipo debe ser alimentado desde un sistema de alimentación con conexión a TIRRA y teniendo una conexión neutra fácilmente identificable. a toma de alimentación para la unidad debe ser cercana y fácilmente accesible. Conexión de alimentación en otros países que no sean USA l equipo es normalmente entregado con un cable de alimentación con un enchufe hembra estándar IC en un extremo y con una clavija estándar IC en el otro. Si se requiere eliminar la clavija para sustituirla por otra, disponer dicha clavija de una forma segura. l código de color a emplear es como sigue: VRD/ AMARIO conectado a (Conductor de protección a Tierra -arth en el original-) SP Advertencia Si la unidad tuviera dos tomas de alimentación, asegurarse de que ambos cables de alimentación están conectados a la misma fase. Clavija Aerea Macho AZU conectado a (Conductor eutro -eutral en el original-) MARRÓ conectado a (Conductor Fase -ive en el original-) nchufe Aereo Hembra ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.2

ACHMIST PATIUM SCTIO 0 Simboli di sicurezza: I Forklaring på sikkerhedssymboler DK Questo simbolo indica l'informazione importante contenuta nei manuali appartenenti all'apparecchiatura. Consultare il manuale. Dette symbol gør brugeren opmærksom på vigtig information i den medfølgende manual. Questo simbolo indica che all'interno dell'apparato sono presenti tensioni pericolose. on cercare di smontare l'unità. Per qualsiasi tipo di intervento rivolgersi al personale qualificato. Attenzione: ATTZIO RISCHIO DI SHOCK TTRICO O CRCAR DI SMOTAR 'UITA PR QUASIASI TIPO DI ITRVTO RIVOGRSI A PRSOA QUAIFICATO e istruzioni relative alla manutenzione sono ad uso esclusivo del personale qualificato. ' proibito all'utente eseguire qualsiasi operazione non esplicitamente consentita nelle istruzioni. Per qualsiasi informazione rivolgersi al personale qualificato. Per prevenire il pericolo di scosse elettriche è necessario non esporre mai l'apparecchiatura alla pioggia o a qualsiasi tipo di umidità. Assicurarsi sempre, che l'unità sia propriamente messa a terra e che le connessioni elettriche siano eseguite correttamente. Questo dispositivo deve essere collegato ad un impianto elettrico dotato di un sistema di messa a terra efficace. a presa di corrente deve essere vicina all'apparecchio e facilmente accessibile. Connessione elettrica nei paesi diversi dagli Stati Uniti 'apparecchiatura normalmente è spedita con cavo pressofuso con la presa e spina standard IC. el caso della rimozione della spina elettrica, gettarla via immediatamente osservando tutte le precauzioni del caso. a leggenda dei cavi è la seguente: Dette symbol indikerer farlig spænding inden i apparatet. Ingen bruger servicerbare dele i apparatet på brugerniveau. Dette apparat må kun serviceres af faglærte personer.. Sikkerhedsadvarsler FORSIGTIG RISIKO FORKTRISKSTØD DÆKPADR MÅ IKK FJRS IG BRUGR SRVICRBAR D SRVIC MÅ KU UDFØRS AF FAGÆRT PRSOR Serviceinstruktioner er kun til brug for faglærte servicefolk. For at reducere risikoen for elektrisk stød må bruger kun udføre anvisninger i betjeningsmanualen. Al service skal udføres af faglærte personer. For at reducere risikoen for elektrisk stød må apparatet ikke udsættes for regn eller fugt. Sørg altid for at apparatet er korrekt tilsluttet og jordet. Dette apparat skal forbindes til en nettilslutning, der yder BSKYTTD JORD og 0 forbindelse skal være tydeligt markeret. Stikkontakten, som forsyner apparatet, skal være tæt på apparatet og let tilgængelig. ettilslutning i andre lande end USA Udstyret leveres normalt med et strømkabel med et standard IC støbt løst hunstik i den ene ende og et standard IC støbt hanstik i den anden ende. Hvis et af de støbte stik på strømkablet er defekt, skal det straks kasseres på forsvarlig vis. Farvekoden for lederen er som følger: VRD/GIAO cavo connesso ad "" (terra) BU cavo connesso ad "" (neutro) MARRO cavo connesso ad "" ( fase) Presa volante Spina volante GRØ/GU leder forbundet til J (Jord) BÅ leder forbundet til 0 BRU leder forbundet til F(Fase) J F 0 Han-stik J 0 F Hun-stik Attenzione el caso in cui l'apparecchio abbia due prese di corrente, assicurarsi che i cavi non siano collegati a fasi diverse della rete elettrica. Forsigtig Hvis enheden har to lysnetindgange, skal der sørges for at begge ledninger tilsluttes lystnetudgange fra den samme fase. Förklaring av Säkerhetssymboler S Turvamerkkien selitys FI Denna symbol hänvisar användaren till viktig information som återfinns i litteraturen som medföljer. Se manualen. Tämä merkki tarkoittaa, että laitteen mukana toimitettu kirjallinen materiaali sisältää tärkeitä tietoja. ue käyttöohje. Denna symbol indikerar att livsfarlig spänning finns på insidan. Det finns inga servicevänliga delar inne i apparaten. Denna apparat få endast repareras av utbildad personal. Säkerhetsvarningar CAUTIO RISK OF CTRIC SHOCK DO OT RMOV COVRS O USR SRVICAB PARTS RFR SRVICIG TO QUAIFID PRSO OY Serviceinstruktioner som anges avser endast kvalificerad och utbildad servicepersonal. För att minska risken för elektrisk stöt, utför ingen annan service än den som återfinns i medföljande driftinstruktionerna, om du ej är behörig. Överlåt all service till kvalificerad personal. För att reducera risken för elektrisk stöt, utsätt inte apparaten för regn eller fukt. Se alltid till att apparaten är ordentligt jordad samt att strömtillförseln är korrekt utförd. Denna apparat måste bli försörjd från ett strömsystem som är försedd med jordadanslutning samt ha en neutral anslutning som lätt identifierbar. Vägguttaget som strömförsörjer apparaten bör finnas i närheten samt vara lätttillgänglig. Strömkontakter i länder utanför USA Apparaten utrustas normalt med en strömkabel med standard IC gjuten honkontakt på ena änden samt en standard IC gjuten hankontakt på den andra änden. Om man måste avlägsna den gjutna hankontkaten, avyttra denna kontakt omedelbart på ett säkert sätt. Färgkoden för ledningen är följande: GRÖ/GU ledning ansluten till (Skyddsjordad ledare) BÅ ledning ansluten till (eutral ledare) BRU ledning ansluten till (Fas ledare) Stickkontakt-Hane Stickkontakt-Hona Tämä merkki ilmoittaa, että laitteen sisällä on vaarallisen voimakas jännite. Sisäpuolella ei ole mitään osia, joita käyttäjä voisi itse huoltaa. Huollon saa suorittaa vain alan ammattilainen. Turvaohjeita VAROITUS SÄHKÖISKU VAARA ÄÄ AVAA AITT KASIA I SISÄÄ KÄYTTÄJÄ HUOTTAVIA OSIA HUOTO AIOASTAA AMMATTIAIS SUORITTAMAA Huolto-ohjeet on tarkoitettu ainoastaan alan ammattilaisille. Älä suorita laitteelle muita toimenpiteitä, kuin mitä käyttöohjeissa on neuvottu, ellet ole asiantuntija. Voit saada sähköiskun. Jätä kaikki huoltotoimet ammattilaiselle. Sähköiskujen välttämiseksi suojaa laite sateelta ja kosteudelta. Varmistu, että laite on asianmukaisesti maadoitettu ja että sähkökytkennät on tehty oikein. aitteelle tehoa syöttävässä järjestelmässä tulee olla SUOJAMAAIITÄTÄ ja nollaliitännän on oltava luotettavasti tunnistettavissa. Sähköpistorasian tulee olla laitteen lähellä ja helposti tavoitettavissa. Sähkökytkentä aitteen vakiovarusteena on sähköjohto, jonka toisessa päässä on muottiin valettu, IC-standardin mukainen liitäntärasia ja toisessa päässä muottiin valettu, IC-standardin mukainen pistoliitin. Jos pistoliitin tarvitsee poistaa, se tulee hävittää heti turvallisella tavalla. Johtimet kytketään seuraavasti: KTA-VIHRÄ suojamaajohdin -napaan SII nollajohdin -napaan RUSKA vaihejohdin -napaan Pistoliitin iitäntärasia Varning Om enheten har två huvudsakliga elförsörjningar, säkerställ att båda strömkablarna som är inkopplade i enheten arbetar från samma fas. Huom Jos laitteessa on kaksi verkkojännitteen tuloliitäntää, niiden johdot on liitettävä verkkopistorasioihin, joissa on sama vaiheistus. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.3

ACHMIST PATIUM SCTIO 0 Símbolos de Segurança O símbolo triangular adverte para a necessidade de consultar o manual antes de utilizar o equipamento ou efectuar qualquer ajuste. ste símbolo indica a presença de voltagens perigosas no interior do equipamento. As peças ou partes existentes no interior do equipamento não necessitam de intervenção, manutenção ou manuseamento por parte do utilizador. Reparações ou outras intervenções devem ser efectuadas apenas por técnicos devidamente habilitados. Avisos de Segurança As instruções de manutenção fornecidas são para utilização de técnicos qualificados. Para reduzir o risco de choque eléctrico, não devem ser realizadas intervenções no equipamento não especificadas no manual de instalações a menos que seja efectuadas por técnicos habilitados. Para reduzir o risco de choque eléctrico, não expor este equipamento à chuva ou humidade. Assegurar que a unidade está sempre devidamente ligada à terra e que as ligações à alimentação estão correctas. O sistema de alimentação do equipamento deve, por razões de segurança, possuir ligação a terra de protecção e ligação ao UTRO devidamente identificada. A tomada de energia à qual a unidade está ligada deve situar-se na sua proximidade e facilmente acessível. igação da alimentação noutros países que não os UA O equipamento é, normalmente, enviado com cabo de alimentação com ficha IC fêmea standard num extremo e uma ficha IC macho standard no extremo oposto. Se for necessário substituir ou alterar alguma destas fichas, deverá remove-la e elimina-la imediatamente de maneira segura. O código de cor para os condutores é o seguinte: Condutor VRD/AMARO ligado a (Terra) Condutor AZU ligado a (eutro) Condutor CASTAHO ligado a (Vivo). Ficha ivre P Tomada ivre rror o topic specified. G Atenção: Se a unidade tem duas fontes de alimentação assegurar que os dois cabos de alimentação estão ligados a tomadas pertencentes à mesma fase. Products employing ithium batteries CAUTIO This equipment contains a lithium battery. There is a danger of explosion if this is replaced incorrectly. Replace only with the same or equivalent type. Dispose of used batteries according to the instructions of the manufacturer. Batteries shall only be replaced by trained service technicians. Power cable supplied for the USA The equipment is shipped with a power cord with a standard IC molded free socket on one end and a standard 3-pin plug on the other. If you are required to remove the molded mains supply plug, dispose of the plug immediately in a safe manner. The color code for the cord is as follows: GR lead connected to (Protective arth Conductor) BACK lead connected to (ive Conductor) WHIT lead connected to (eutral Conductor) For products with more than one power supply inlet Caution: To reduce the risk of electric shock plug each power supply cord into separate branch circuits employing separate service grounds. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.4

ACHMIST PATIUM SCTIO 0 Rack Mounting the nclosure This product must not be rack mounted using only the front rack ears. When rack-mounting the product, one of the following methods of installation must be used: - Place the unit on a suitably specified, and installed rack shelf and secure the product to the rack via the front rack ears or, Fit the unit using the rear rack mount kit available from Snell & Wilcox by quoting the order code FGACK RACK-MT-KIT. Handling Instructions CAUTIO DO OT ATTMPT TO IFT TH UIT USIG TH HADS ATTACHD TO TH FROT PA. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.5

ACHMIST PATIUM SCTIO 0 Safety Standard Alchemist Platinum conforms to the following standard: 60950: 2000 Safety of Information Technology quipment. MC Standards This unit conforms to the following standards: BS 55103-1 : 1997 lectromagnetic Compatibility, Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 1. mission BS 55103-2 : 1997 lectromagnetic Compatibility, Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 2. Immunity Federal Communications Commission Rules Part 15, Class A :1998 MC nvironment The product(s) described in this manual conform to the MC requirements for, and are intended for use in, either The commercial and light industrial environment (including, for example, theatres) 2 or The controlled MC environment (for example purpose-built broadcasting or recording studios), and the rural outdoor environment (far away from railways, transmitters, overhead power lines, etc.) 4 The applicable environment is stated in the Technical Profile section of the product operation manual under MC Performance Information/nvironment. MC Performance Information Please refer to the Technical Profile/Specifications section of the product operation manual. MC Performance of Cables and Connectors Snell & Wilcox products are designed to meet or exceed the requirements of the appropriate uropean MC standards. In order to achieve this performance in real installations it is essential to use cables and connectors with good MC characteristics. All signal connections (including remote control connections) shall be made with screened cables terminated in connectors having a metal shell. The cable screen shall have a large-area contact with the metal shell. COAXIA CABS Coaxial cables connections (particularly serial digital video connections) shall be made with high-quality double-screened coaxial cables such as Belden 1694 or BBC type PSF1/2M. D-TYP COCTORS D-type connectors shall have metal shells making good RF contact with the cable screen. Connectors having "dimples" which improve the contact between the plug and socket shells, are recommended. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.6

ACHMIST PATIUM SCTIO 0 About this Manual This manual contains information for the operation of the Alchemist Platinum unit. Update/revision sheets should replace existing pages when supplied by the agent or Snell & Wilcox td. ote that the date at the bottom of the page is the release date of the current revision. This manual covers the following produc\\\\snellwilcox.local\\root\\marketing\\prodmgmt\\data Alchemist Platinum - Motion Compensated Conversion Platform Packing ist The unit is supplied in a dedicated packing carton provided by the manufacturer and should not be accepted if delivered in inferior or unauthorised materials. Carefully unpack the carton and check for any shipping damage or shortages. Any shortages or damage should be reported to the supplier immediately. nclosures: Alchemist Platinum Power cable Installation Manual Operation Manual Software Version Amendments otes about Versions Fitted... Version 8 Manufacturers otice Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen display looks etc. Reproduction or disassembly of embedded computer programs or algorithms prohibited. Copyrighted names: Microsoft Windows Information in this manual and software are subject to change without notice and does not represent a commitment on the part of Snell & Wilcox td. The software described in this manual is furnished under a license agreement and may not be reproduced or copied in any manner without prior agreement with Snell & Wilcox td. or their authorized agents. o part of this publication may be transmitted or reproduced in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system, without permission being granted, in writing, by the publishers or their authorized agents. Important otice o responsibility is taken by the manufacturer or supplier for any non-compliance to MC standards due to incorrect installation. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.7

ACHMIST PATIUM SCTIO 0 Table of Contents SCTIO 0 Product Support Procedure... 0.9 1 Installation Power Connections... 1.1 Installing/Removing Power Supplies... 1.2 Opening the front panel... 1.3 nvironment / Remote Control... 1.4 Rear Panel Connections... 1.5 2 Specifications ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.8

ACHMIST PATIUM SCTIO 0 Product Support Procedure If you experience any technical or operational difficulties with a Snell & Wilcox product please do not hesitate to contact us or utilize our online form to request assistance. There is a lot of information you can give us that will enable us to diagnose your problem swiftly. Please read the following guidelines, as these suggestions will help us to help you. Basic Information For Units... Please provide the exact product Model, unit Serial umber and Software Version information. For Cards or Modules. Please provide the Sub-Assembly umber, card Serial umber and the Software Version information. Basic Application Inputs... Please provide full details of the Input Signals being used including any references etc. and where they are being generated. Outputs... Please provide full details of the Output Signals required and how they are being monitored. System... Please provide a brief description of the system in which your S&W equipment is currently being used. Basic Tests Preset Unit... Please use the Preset Unit function to return the settings back to the factory default. RollCall... Is your unit currently connected to a RollCall capable PC? This software is obtainable for free and provides a very user friendly GUI for virtually all S&W equipment - perfect for complex products, large systems or those with passive front panels. Card dge Info.... What is the status of the card edge Ds or display? These can often provide information such as power status and input detection conditions. Internal TPG... Many S&W products have an internal test pattern/tone generator. Please activate this to assist you with your problem analysis. In addition to the above, please do not forget to provide us with all of the necessary contact information: ames Telephone & Fax numbers e-mail addresses Business address A form has been provided for this information and will be found on the next page or an on-line form is available on the Snell & Wilcox website at: http://www.snellwilcox.com/support/request ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.9

ACHMIST PATIUM SCTIO 0 Product Support Request Form ame: * Company: Address Details: * Post/ZIP Code: Country: * Telephone: * Fax: mail: * ocal S&W Center: * Product ame: * Switchers (i.e. Magic DaV, Switchpack, Kahuna) Product Type: * File & Data Transfer Products (i.e. RollCall, Memphis & Asteroid) Video Products (i.e. Modular, Kudos Plus and Alchemist) Unit Serial umber: * Fault/Spare Part Information: * (please advise us how many units show this fault and the system layout showing all other manufacturers' products) * Preferred Method of Contact: Item is required. e-mail Phone Please mail to: Snell & Wilcox td., Southleigh Park House, astleigh Road, Havant, Hants, PO9 2P. United Kingdom. Service Contact Information: Tel: +44 (0) 2392 489058 Fax: +44 (0) 2392 489057 http://www.snellwilcox.com/support ftp://ftp.snellwilcox.com/support ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.10

ACHMIST PATIUM SCTIO 0 Manual Revision Record Date Version o. Issue o. Change Comments 080202 1 1 First Issue 120503 2 1 DFTplus data added Complete new manual issued 190603 2 2 Multilingual safety added 00 Complete new manual issued 040903 2 3 For version 8 P-Film added + Slow PA delay in tech spec Complete new manual issued 071103 2 4 Multi lingual and safety data Complete new manual issued 040304 2 5 Caution label to sec 3 + PSP Complete new manual issued 031005 2 6 Weight & Dimensions added to Tech spec Complete new manual issued ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 0.11

ACHMIST PATIUM SCTIO 1 Installation UPACKIG TH ACHMIST The unit is packed in a single flight case. The contents of the flight case are as follows: Alchemist unit 2 Power cables 1 Operating Manual 1 Installation Manual Unpack the flight case carefully and check for any shortages or shipping damage. Immediately report any shortages or damage to Snell and Wilcox imited. Warning The Alchemist Platinum unit weighs more than 18 kg. Appropriate manual handling precautions should be taken when lifting the unit. CAUTIO DO OT ATTMPT TO IFT TH UIT USIG TH HADS ATTACHD TO TH FROT PA. COCTIG POWR TO ACHMIST PATIUM Alchemist Platinum can support dual power supplies for redundancy. However this is an option, therefore a second PSU may not be fitted Caution To reduce the risk of electric shock plug each power supply cord into separate branch circuits employing separate service grounds. Supply Voltage The unit automatically senses the nominal supply voltage and sets itself up accordingly. o voltage adjustment procedure is required. Circuit Breakers Alchemist Platinum has a circuit breaker on each mains input. In the event of a fault a plunger will pop out and protrude from the rear of the breaker. To reset remove power from the unit, press the plunger back in and then restore power to the unit. Warning If the breaker continually trips disconnect the unit and consult your dealer or service agent. ote: before connecting power to the unit please refer to the safety warnings on page 0.2. Power Inlets Mains power is supplied to the unit via two filtered IC connectors. The right hand IC connector (as viewed from the rear of the unit) powers the lower PSU. ORMA TRIPPD The rated current for the unit is 5.5A at 100 V and 2 A at 250 V. The standby switches are located on the left-hand side of the front panel. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 1.1

ACHMIST PATIUM SCTIO 1 Installing/Removing Power Supplies The alchemist Platinum is provided with one PSU as standard. There is an option for installing a second PSU to allow dual redundant operation. This may be a factory fitted option or can be done as an upgrade. Installing PSU 1) Remove front panel 2) Remove blanking plate 3) nsure the power supply s orientation 4) Slide power supply in and push home firmly 5) Tighten securing screws 6) Refit the front panel See diagram: Warning When a single PSU is used the second PSU slot must always have the blanking plate fitted. Operating the equipment without this may result in damage to the equipment. When installing a second PSU ensure that the blanking plate is kept in a safe place should it be required in the future. Removing PSU 1) Remove front panel 2) Undo securing screws 3) Pull handle firmly 4) Fit new PSU or blanking plate 5) Refit front panel See diagram below: Warning When a single PSU is used the second PSU slot should always have the blanking panel fitted. Operating the equipment without this may result in damage to the equipment. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 1.2

ACHMIST PATIUM SCTIO 1 Opening the front panel 1) Use a tool to turn the six screws (three at either side) anti-clockwise to release the panel 2) Using both of the pull handles carefully pull the front panel forward squarely. The front panel is hinged and will pivot about the lower edge. Pull Handles PU FORWARD SQUARY Turn these screws anti-clockwise to release panel 3. Support and lower the panel until the hinge comes to rest on the chassis. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 1.3

ACHMIST PATIUM SCTIO 1 nvironment Although ruggedly constructed to meet the normal environmental requirements, it is important that there is a free flow of air at the front, rear and left side to dissipate the heat produced during operation. Installations should be designed to allow for this. Caution The ventilation holes on the rear and left hand side of the unit must not be obscured or damage to the equipment may result. If the unit is to be rack mounted, first open the front panel; details are given above. The fixing "ears" behind the panel will be revealed and the unit can be mounted in the rack. Warning The Alchemist Platinum unit weighs more than 18 kg. Appropriate manual handling precautions should be taken when lifting the unit. Warning Under no circumstances should the grip handles be used to lift the Alchemist Platinum unit. When rack mounting the equipment support other than the rack mount ears must be provided. Remote Control The unit can be controlled via RollCall using the BC connector. The RollCall system should be connected using 75 Ohm "T" pieces in a similar manner to an "thernet" system. Both extremities of the system must be terminated in 75 Ohms. ote that in a RollCall segment, all units must have different unit address codes. For more information see RollCall section. ote: The coaxial link is bi-directional and therefore must not be passed through signal switching networks. Also, to allow hum and noise cancellation the screen of the coaxial connection must not be earthed. For details of the menu system see Section 4 page 4.15 of the Operator s manual, and for details of the RollCall system consult the Modular System Operation manual. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 1.4

ACHMIST PATIUM SCTIO 1 COCTIOS All the connectors are mounted on the rear panel of the unit and are appropriately annotated. IPUTS SDI Serial Digital Input These are the two SDI serial digital inputs. A SDI IPUT B SD Ref A SD Ref A SD Genlock Reference Ref A and B Two pairs of loop-through BC connectors are provided that may be connected to external sources of reference signals. SD Ref A OOP SDI OUTPUT SD Ref A OOP OUTPUTS (Covers SD and HD Output Options) SDI OUTPUT SDI Serial Digital Output Alchemist Platinum provides two SD serial digital outputs. HD Genlock Reference Ref A and B Two pairs of loop-through BC connectors are provided that may be connected to external sources of reference signals. HD Ref A OOP HD Ref B OOP HD SDI Serial Digital Output HDSDI OUTPUT Alchemist Platinum provides two HD serial digital outputs. ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 1.5

ACHMIST PATIUM SCTIO 2 Specifications Features Signal Inputs Serial Digital Analog Reference Signal Outputs Serial (SD option) Serial (HD option) Control Functions 2 x BC SD 10-bit serial digital inputs at 270MHz Rec. 601 and embedded audio SMPT 272M Separate SD and HD references HD ref: 2 x BC HDTV Tri-syncs or SD Bi-sync for Genlock SMPT 240M/274M SD ref: 2 x BC Bi-sync 2 x BC SD 10-bit serial digital outputs at 270MHz Rec. 601 with embedded audio SMPT 272M 2 x BC HDTV 10-bit serial digital outputs at 1.48GHz SMPT 292-1997 and embedded audio SMPT 299M Input Standard SD SDI Rec. 601 Output Standard (SD option) Output Standard (HD option) SD Film Output (Video to Film option) HD Film Output (Video to Film option) 625(576)/50i, 525(480)/59.94i SD SDI Rec. 601 625(576)/59.94i, 525(480)/50i HD SDI SMPT 292M, 299M 1125(1080)/59.94i, 1125(1080)/60i, 1125 (1080)/50I, 1125(1035)/59.94i, 1125(1035)/60i, 1125(480)59.94p, 1125(480)60p, 750(720)/59.94p, 750(720)/60p, 750(720)/50p, 750(576)/50p, 750(480)/59.94p, 750(480)/50p, 625(576)/25PsF 1125(1080)/25PsF 1125(1080)/23.98PsF Features Memory Utilities Control Source Specifications Internal Processing Interpolation System delay (min delay) System delay (normal) Power Input Voltage Range Consumption Mains Fuse Rating Mechanical Temperature Range Cooling Weight Case Type 8 global memories. Pattern On/Off. SD: BU bars and SPMT bars HD: 100% bars, 75% bars, SMPT Bars, Tartan Bars, Pluge, Ramp, Sweep, Pulse & Bar, burst Mono, Freeze type: field or frame Gamut limit (SD only) uminance clipper Front panel, RollCall 12-bit 4:4:4 (Y: Cr: Cb) 3-stage 46 point temporal spatial filter 150ms (60Hz to 60Hz) 160ms (60Hz to 50Hz) 170ms (50Hz to 60Hz) 180ms (50Hz to 50Hz) 317ms (60Hz to 60Hz) 327ms (60Hz to 50Hz) 327ms (60Hz to 24Hz) 370ms (50Hz to 60Hz) 380ms (50Hz to 50Hz) 442ms (60Hz to Slow PA) 100 V to 264 V rms., 50/60 Hz 330 W Re-settable circuit breaker 0 to 40 C operating 2 x axial fan, front-to-rear airflow Approximately 25 kg 6 RU Rack Mounting Dimensions 483 mm x 540 mm x 265 mm (w, d, h) SD Slow PA (option of DFTplus) HD Film Output (DFTplus option) Input oss Convert Color-space conversion Genlock 625(576)/23.98PsF 625(576)/47.95i 1125(1080)/23.98PsF 1125(1080)/47.95i Freeze/Black Ph.C Motion Compensation Active / Inactive area Auto, SMPT 274, 240, BT709, RC 601 SD: Auto / Ref. A / Ref. B HD: Auto / Ref. A / Ref. B / Input Timing: Vertical / Horizontal ACPIS 031005 www.snellwilcox.com Version 2 Issue 6 2.1