Flash Single Color Datasheet Federal Series Features : Compact package size Max. pulse current: 1000mA 8 KV ESD protection Typical Applications : Caution Light Spot Light Stage Light Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1
Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure (Red)...5 Voltage Bin Structure (PC Amber, Blue, True Green)...5 Mechanical Dimensions...6 Chromaticity Coordinates (PC Amber)...7 Characteristic curve...8 Product Packaging Information...11 Revision History...12 About Edison Opto...12 Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2
General Information Introduction Flash series, a surface mount device with ultra-compact light source is designed for camera flash in portable digital imaging system. The small physical dimension can be easily designed second optical lens. The higher brightness enabling higher resolution of picture which is taken in the darker environments. In conclusion, Flash Series offers you an extraordinary LED experience. Ordering Code Format 2 F S0 03 xx xx F04 xxx X1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X13 X14-X16 X1 X2 X3-X4 X5-X6 X7-X8 Type Component Series Wattage Color 2 Emitter F Federal S0 Flash 03 3W RX Red BX AX TX Blue PC Amber True Green X9-X10 X11-X13 X14-X16 Internal code PCB Board Serial Number - - F04 2016 - - Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3
Absolute Maximum Ratings Parameter Symbol Value Units DC Forward Current [1] I F 350/700 ma Peak Pulsed Current; (tp 100μs, Duty cycle=0.25) I pulse 1000 ma Transient Surge Voltage - 8 V Reverse Voltage [2] V R Note 2 V LED Junction Temperature [3] T J 125 C Operating Temperature - -40 ~ +80 C Storage Temperature - -40 ~ +120 C ESD Sensitivity (HBM) - 8000 V Allowable Reflow Cycles - 3 cycles Soldering Temperature - 260 C Notes: 1. Maximum forward current for 1W and 3W are 350mA and 700mA respectively. 2. LEDs are not designed to drive in reverse bias. 3. Proper current derating must be observed to maintain junction temperature below the maximum. Characteristics Parameter Symbol Value Units R/ A/ B : 120 Viewing Angle (Typ.) 2Θ 1/2 T : 130 Degree R : 1.9-2.4 Forward voltage@350ma V F T/ A/ B : 2.8-3.5 V Thermal resistance - 10 o C/W Wavelength - R : 620-630 B : 460-475 T : 525-535 nm Level 1 JEDEC Moisture Sensitivity - Notes: 1. Edison maintains a tolerance of ±1nm on wavelength measurement. 2. Viewing angle is measured with accuracy of ±10%. 3. Edison maintains a tolerance of 0.06V on forward voltage measurement. Floor Life Conditions: 30 C / 85% RH Soak Requirements(Standard) Time (hours): 168+5/-0 Conditions: 85 C / 85% RH - Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4
Luminous Flux Characteristic Luminous Flux Characteristics, I F =350mA and T J =25 C Color Group Red Min. Luminous Flux@350mA(lm) Max. Luminous Flux@350mA(lm) Calculated Min. Luminous Flux@450mA(lm) Calculated Min. Luminous Flux@700mA(lm) Q0 30.3 39.4 36.4 60 R0 39.4 51.2 47.3 75 P0 23.3 30.3 28.0 40 Order Code 2FS003RX00F04001 Blue PC Amber True Green Q0 30.3 39.4 36.0 51 R0 39.4 51.2 47.0 66 T1 66.5 70.0 79.8 110 T2 70.0 80.0 84.0 120 T3 80.0 86.5 96.0 130 U1 86.5 90.0 104.0 147 U2 90.0 100.0 108.0 153 U3 100.0 110.0 120.0 170 S0 51.2 66.5 60.0 72.0 T0 66.5 86.5 78.5 93.0 2FS003BX06F04001 2FS003AX44F04001 2FS003TX00F04001 Notes: 1. The luminous flux performance is guaranteed within published operating conditions. 2. Flux is measured with accuracy of ±10%. Voltage Bin Structure (Red) Group Min. Voltage (V) Max. Voltage (V) U04 1.9 2.2 U05 2.2 2.5 Voltage Bin Structure (PC Amber, Blue, True Green) Group Min. Voltage (V) Max. Voltage (V) V01 2.8 3.1 V02 3.1 3.4 Note: Forward voltage measurement allowance is ± 0.06V. Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5
Mechanical Dimensions Emitter Type Dimension 0.72±0.1 0.30±0.1 2.04±0.1 0.50±0.05 1.10±0.05 1.64±0.1 1.45±0.05 Top View Bottom View X±0.01 Side View Note: X =0.79mm for Red, Blue emitter X =0.75mm for PC Amber emitter Circuit Recommended Solder Pad 0.60 0.35 1.20 Polarity (-) (+) 1.55 0.775 0.175 Note: All dimensions are measured in mm. Indicates location of optical center after reflow Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6
Chromaticity Coordinates (PC Amber) 0.4385 0.4300 0.4215 A20 A10 CIE-y 0.4130 0.4045 0.3960 B10 B20 0.3875 0.545 0.555 0.565 0.575 0.585 0.595 0.605 0.615 CIE-x A10 A20 B10 B20 X Y X Y X Y X Y 0.5775 0.4132 0.5705 0.4111 0.5775 0.4132 0.5705 0.4111 0.5843 0.4151 0.5775 0.4132 0.5843 0.4151 0.5775 0.4132 0.5622 0.4372 0.5576 0.4326 0.6062 0.393 0.6000 0.3930 0.5576 0.4326 0.5499 0.4249 0.600 0.393 0.5940 0.3930 Notes: 1. Luminous Flux Characteristics, I F =350mA. 2. CIEx/y tolerance: ±0.005 Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7
Characteristic curve Color Spectrum 1.2 Normalized luminous Intensity 1.0 0.8 0.6 0.4 0.2 Red Blue PC Amber True Green 0.0 400 450 500 550 600 650 700 750 800 Wavelength(nm) Beam Pattern 120 Normalized Lumnious Intensity 100 80 60 40 20 Red Blue PC Amber True Green 0-90 -60-30 0 30 60 90 Radiation Angle Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8
Forward Current vs. Forward Voltage 840 700 Relative Luminous Intensity Forward Current (ma) 560 420 280 140 0 1.9 2.15 2.4 2.65 2.9 3.15 3.4 3.65 Forward Voltage (V) Relative Luminous Intensity vs. Forward Current 3.0 2.5 2.0 1.5 1.0 0.5 Red Blue PC Amber True Green Red Blue PC Amber True Green 0 0 140 280 420 560 700 840 Forward Current (ma) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9
Δx,Δy vs. Forward Current (PC Amber) 0.015 0.010 0.005 Δx Δy Δx,Δy Δx,Δy 0.000-0.005-0.010-0.015 0 175 350 525 700 875 Δx,Δy vs. Junction Temperature (PC Amber) 0.015 0.010 0.005 0.000-0.005-0.010 Forward Current (ma) Δx Δy -0.015 0 25 50 75 100 125 150 Junction temperature ( o C) Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 10
Product Packaging Information 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0 1.50 ± 0.10 1.75 ± 0.10 8.00 + 0.30-0.10 3.50 ± 0.05 0 0.50 ± 0.05 Seal Reel Label Taping reel dimensions Moisture absorbent material Label Moisture proof bag Item Quantity Total Dimensions(mm) Reel 4,000 pcs 4,000 R=178 Box 5 Reels 20,000 250*240*70 Carton 10 Boxes 200,000 488*260*364 Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11
Revision History Versions Description Release Date 1 Establish order code information 2015/06/18 2 1. Update the photo of front page 2. Revise the Blue order code 3. Update Spectrum & beam pattern 2016/09/08 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2016 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 12