U-ighting T8 ED Tube Features 5 Years Warranty. ight Source: umen Max SMD 2835 Single End Power Wiring-Safe Application Material: frosted PC cover Easy Installation: Hoyol ED tubes are quite fit to conventional T8 fluorescent brackets. More features are as follows. Extended ife Ballast Bypassed / d Saves up to 70% Energy, ighting efficiency up to 110-120lm/W Power supply efficiency is more than 90% ife span: >50,000hrs Instant On o Buzzing Environmental-friendly and less hazardous without mercury o Radio Frequency Interference o Flickering Fast Return on Investment Certificates SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608
U-ighting E-mail: info @ul-ledlighting.com Application Replacement for conventional fluorescent tubes Hotels Conference/meeting rooms Factories Offices Commercial complexes Residential / institution buildings Schools, colleges, and universities Hospitals Supermarkets Subways Warehouses Railway Stations Airports Dimension (Unit: mm) 588 / 895 / 1198 / 1498 mm 26mm SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Tel: +86-755 29559253 Moble: +86-135 30651608
U-ighting Technical Specification A: Technical Parameter Item U-T89W U-T813W U-T818W U-T822W Dimension 588x 26mm 895x 26mm 1198x 26mm 1498x 26mm (2FT) (3FT) (4FT) (5FT) Voltage AC85V-265V 50/60HZ Power 9W 13W 18W 22W ED Type SMD2835 ED Quantity 48pcs 72pcs 96pcs 120pcs umen (±10%) 1080lm 1560lm 2160lm 2460lm Color Temperature (CCT) Beam Angel 2800K-6500K 120 Color Rendering Index (CRI) Ra >80 Power Supply Efficiency >90% ED uminous Efficiency Up to 120lm/W Power Factor (PF) >0.95 Total Harmonic Distortion (THD) 15% IP Rank IP 50 Certificate C-TICK, SAA, CE, CB B. Environmental Temperature Range Operating Humidity Range Operating Temperature Range Storage Humidity Range Storage -20 to 40 10% to 80% -40 to 65 10% to 80% Remark: 1. Make sure far away from harmful gas, combustible, explosive goods and corrosive chemicals. 2. Package should keep at least 20cm from the ground and 50cm from wall,he at source,and window or air entrance. SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608
U-ighting Plane Isolux Curve & Illumination Cone Curve UMIOUS ITESITY DISTRIBUTIO DIAGRAM C0 PAE ISOUX DIAGRAM (UIT:lx) MH(m) Flux out : 811.3lm -150 -/+180 150 1.5 2.0 2.5 3. 281f t 1m 10. 12, 34. 13f c 108. 9, 367. 4l x 10. 04f t 305. 89c m -120 120 3.0 3.5 6. 562f t 2m 2. 529, 8. 533f c 27. 23, 91. 84l x 20. 07f t 611. 78c m -90 0 80 160-60 240 320-30 400 30 0 (50%):123.6 90 60 UIT :cd C0/180,134.5? C30/210,128.6? C60/240,118.0? C90/270,113.5? AAAAAAAAAAAAAAAAAAAAAAAAAAA AVERAGE BEAM AGE (50%):123.6deg 4.0 4.5 5.0 5.5 0.0 2.0 4.0 220 180 150 110 73.0 37.0 29.0 18.0 15.0 11.0 S(m) 9. 843f t 3m 13. 12f t 4m 16. 4f t 5m 1. 124, 3. 792f c 12. 10, 40. 82l x 0. 6324, 2. 133f c 6. 807, 22. 96l x 0. 4047, 1. 365f c 4. 356, 14. 70l x 30. 11f t 917. 67c m 40. 14f t 1223. 56c m 50. 18f t 1529. 45c m Height Eavg, Emax Angle: 1113.64deg Diameter ote:the Curves indicate the illuminated area and the average Packinginformation Remark: 1. eutral Carton Packing for External Package. 2. Designed Sticker service for single product is available. 3. Designed external package service is available,but extra cost will be charged probably according to your order. SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608
U-ighting Installation Installation Guide for Single-end Input ED Tube 1. Inductive Fixture (Magnetic Ballast) A: Traditional fluorescent tube with inductive fixture. (Magnetic Ballast) AC110V/220V Replace with ED Way2: Add wire AC100V/240V AC100V-254V Turn off the power, remove fluorescent tube remove fluorescent and replace with ED. Place ED tube into position. Turn off the power, remove fluorescent tube and fluorescent. Bypass magnetic (Qualified Electrician OY). Replace with ED tube. 2.Electronic Fixture (Electronic Ballast) AC110V-220V AC100V-240V Addwire Addwire B: Traditional fluorescent tube with electronic fixture. (Electronic Ballast) Turn off the power, remove fluorescent tube. Qualified Electrician needs to bypass or remove the electronic, reconnect for single ended power input, and then replace with ED tube. Warning: Please use the product within the specified range of voltage Please follow the correct installation steps to install the product,and do not touch the tube when it is working. Please cut the power off when install and remove the products to avoid risk of electric shock. Please install the tube in the correct sized fixture. Do not look directly at ED light source for a long time. SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608
U-ighting Installation Guide for Double-end Input ED Tube 1. Inductive Fixture (Magnetic Ballast) A: Traditional fluorescent tube with inductive fixture. (Magnetic Ballast) AC110V/220V Way2: AC100V-254V AC100V/240V Bypass Turn off the power,takeoff fluorescent tube remove fluorescent. Turn off the power,takeoff fluorescent tube and remove fluorescent.bypassmagnetic (Qualified Electrician OY). Replace with ED tube. 2.Electronic Fixture (Electronic Ballast) AC110V-220V AC100V-240V B: Traditional fluorescent tube with electronic fixture. (Electronic Ballast) Turn off the power,takeoff fluorescent tube. Qualified Electrician needs to remove the electronic, rewiring, and then replace with ED tube. Warning: Please use the product within the specified range of voltage Please follow the correct installation steps to install the product,and do not touch the tube when it is working. Please cut the power off when install and remove the products to avoid risk of electric shock. Please install the tube in the correct sized fixture. Do not look directly at ED light source for a long time. SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608
U-ighting otice: Electronic components are exposed to rain or other liquids. Products release smell gas, abnormal sound and unusual flash. The shell is broken. Debris goes into the bracket or the tube. The tube breaks away from the right position of lamp fixture. Compliance and Standards 1. Insulation Resistance The IR shall be at least 50MΩ when apply 500Vdc between primary and secondary 2. Dielectric Strength (Hi -pot) Input To Output 3750Vac 60Hz 1minute 3MA When AC voltage of 3.75KV is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s, and held at that value for 60s between the inputs. and output and between the input and housing, the current sensitivity shall be less than 5mA. After this test, the adapter shall exhibit no electrical and mec hanical abnormalities. 3. eakage Current The leakage current shall be less than 0.25m A for class II when power supply is operated maximum input voltage and maximum load. 4. Safety Standard 34A-1501P IEC:60598-1:2008 IEC61347-1/A1:2010 IEC61347-2 -13:2006 IEC62031:2008 IEC62471:2006 IEC62471-2:2009: Passed E60598-1/A11:2009 E61347-2 -13:2006 E61347-1/A1:2011 E62031:2008 E62471:2008 E61195:1999 E62493:2010: Passed 5. EMI/EMS Standard E55015:Passed E61000-3-2:Passed E61000-4-2: Passed SHEZHE U ED IGHTIG PHOTOEECTRICITY CO., TD. Tel: +86-755 29559253 Add: 13 Floor.o.,2009 Xuegang road,gangtou Community,Bantian Street,onggang District,Shenzhen ;Guangdong. Moble: +86-135 30651608