Side Chairs and Bench Statement of Line Price List Effective Dates: Pricing 07.02.18 Revision 12.03.18 Arched Arms with Fully Upholstered Back See page 13.3 to specify. Arched Arms with Wood Top Rail Sloped Arms See page 13.3 to specify. Rolled Arms See page 13.3 to specify. Angular Arms Width 22 1 2" Depth 23 3 4" Arm height 25 1 2" Seat depth 18" Height 32 1 4" Width 22 1 2" Depth 24 1 2" Arm height 25 3 4" Seat depth 18 1 2" Width 22 1 2" Depth 23 3 4" Arm height 25 1 2" Seat depth 18" Width 22 3 4" Depth 23 3 4" Arm height 25 3 4" Seat depth 18" Width 23" Depth 24 1 2" Arm height 25 1 2" Seat depth 18 1 2" Angular Arms with Slat Back Armless Bench with Arched Arms Also available in a bariatric model. Width 22 1 2" Depth 23 3 4" Arm height 25 1 2" Seat depth 19 1 4" Width 22 1 4" Depth 24" Arm height Seat depth 17 1 2" Height 32 1 4" Width 50" Depth 24 1 2" Arm height 25 3 4" Seat width 47 1 2" Seat depth 18 1 2" seating models are dimensionally consistent and meet or exceed the applicable BIFMA/ANSI standards. Page 13.1
Side Chairs and Bench Overview Planning Frame is constructed of kiln-dried maple hardwoods. Cushions are high-resiliency, CFCfree polyurethane foam. Details Four different arm shapes are available on side chairs: arched, sloped, rolled, and angular. Each has its own distinct design. Armless side chair is also available. Seat upholstery is wrapped over cushion and secured to the seat suspension with upholstery staples. The entire seat assembly is attached to wood cleats on the chair frame with wood screws. Piping trims the front edge of the seat. Joints are double doweled and securely glued to ensure maximum strength. Corners are rein forced with wood corner blocks and tie screws on all models. Nylon glides are 7 8" in diameter. Wood Top Rail Top rail styles include fully uphol stered and wood. Fully Upholstered Back shapes include square, arched, and slat back. See Statement of Line or pricing pages for arm and back combinations. Two-seat bench is available with arched arms and fully upholstered back. Bariatric bench is available with arched arms and fully upholstered back; rated to hold up to 500 lbs. Seat suspension is constructed of 1 2"-thick, 5-ply molded plywood that is machined to form an open peri - meter. Uni directional webbing is machine stretched across the open perimeter and stapled to the edges to form a suspension. Back on fully upholstered models is constructed of 1"-thick foam applied to 5-ply contoured plywood. Back is attached to the frame with press fit fasteners. Back on wood top rail models is constructed of 1"-thick foam applied to 5-ply contoured plywood. Back is attached to the frame with T-nuts, machine screws, and metal brackets. Back on slat back chair is constructed of 1 4"-thick, 5-ply molded plywood slats that are machined to shape and glued individually into slots in the frame. Back upholstery is wrapped in place and secured with upholstery staples. Outer back panel is constructed of 3 8"-thick foam applied to 3 16"-thick, 3-ply contoured plywood. Press fit fasteners attach outer back panel to the inner back. Seat cushion is applied to the flexible webbing suspension. Foam is 1 3 4" thick on chairs and 2 1 2" thick on two-seat bench. Page 13.2
Fully Upholstered-Back Side Chairs with Kimball Upholstery Pricing GSA SIN 711-18 Kimball Upholstery Price Grade Model 1 or COM 2 3 or COL 4 5 6 7 L7 L8 Arched Arms 4605 $ 1063 $ 1111 $ 1139 $ 1169 $ 1213 $ 1258 $ 1302 $ 1489 $ 1594 4605F TB133 1223 1271 1299 1329 1373 1418 1462 1649 1754 Sloped Arms 4635 $ 1168 $ 1216 $ 1244 $ 1274 $ 1318 $ 1363 $ 1407 $ 1594 $ 1699 4635F TB133 1328 1376 1404 1434 1478 1523 1567 1754 1859 TB133 Fire code treatment is available on select Kimball upholstery. Reference Guide at www.kimball.com. How to Specify! Model 2 Upholstery grade 3 Upholstery number 4 Finish price group: STD = Group 1 5 Finish designator Rolled Arms 4620 $ 1232 $ 1280 $ 1308 $ 1338 $ 1382 1427 $ 1471 $ 1658 $ 1763 4620F TB133 1393 1441 1469 1499 1543 1588 1632 1819 1924 See page 13.7 for COM/COL yardage requirements. Page 13.3
Wood Top Rail Side Chairs with Kimball Upholstery Pricing GSA SIN 711-18 Kimball Upholstery Price Grade Model 1 or COM 2 3 or COL 4 5 6 7 L7 L8 Arched Arms 4610 $ 1098 $ 1135 $ 1157 $ 1182 $ 1216 $ 1251 $ 1286 $ 1432 $ 1515 4610F TB133 1225 1262 1284 1309 1343 1378 1413 1559 1642 Angular Arms 4630 $ 1235 $ 1272 $ 1294 $ 1319 $ 1353 $ 1388 $ 1423 $ 1569 $ 1652 4630F TB133 1360 1397 1419 1444 1478 1513 1548 1694 1777 TB133 Fire code treatment is available on select Kimball upholstery. Reference Guide at www.kimball.com. How to Specify! Model 2 Upholstery grade 3 Upholstery number 4 Finish price group: STD = Group 1 5 Finish designator Angular Arms and Slat Back 4640 $ 1235 $ 1266 $ 1284 $ 1303 $ 1331 $ 1360 $ 1389 $ 1509 $ 1576 4640F TB133 1337 1368 1386 1405 1433 1462 1491 1611 1678 Armless 4600 $ 1057 $ 1094 $ 1116 $ 1141 $ 1175 $ 1210 $ 1245 $ 1391 $ 1474 4600F TB133 1182 1219 1241 1266 1300 1335 1370 1516 1599 Bench with Arched Arms 4642 $ 1729 $ 1790 $ 1826 $ 1866 $ 1922 $ 1979 $ 2037 $ 2276 $ 2411 4642F TB133 1934 1995 2031 2071 2127 2184 2242 2481 2616 Bariatric Bench with Arched Arms 4644 $ 1855 $ 1920 $ 1958 $ 1999 $ 2058 $ 2119 $ 2180 $ 2433 $ 2575 4644F TB133 2060 2125 2163 2204 2263 2324 2385 2638 2780 See page 13.7 for COM/COL yardage requirements. Page 13.4
Side Chairs with Alliance Program Upholstery Pricing GSA SIN 711-18 Alliance Upholstery Price Grade A B C D E F G H I Model J K L M N O P Q R 4600 $ 1111 $ 1137 $ 1158 $ 1178 $ 1201 $ 1226 $ 1243 $ 1270 $ 1295 1319 1358 1438 1487 1499 1508 1520 1532 1586 4605 1132 1165 1192 1217 1246 1279 1300 1335 1365 1396 1447 1547 1610 1626 1637 1652 1668 1736 4610 1152 1178 1199 1219 1242 1267 1284 1311 1336 1360 1399 1479 1528 1540 1549 1561 1573 1627 4620 1301 1334 1361 1386 1415 1448 1469 1504 1534 1565 1616 1716 1779 1795 1806 1821 1837 1905 4630 1289 1315 1336 1356 1379 1404 1421 1448 1473 1497 1536 1616 1665 1677 1686 1698 1710 1764 4635 1237 1270 1297 1322 1351 1384 1405 1440 1470 1501 1552 1652 1715 1731 1742 1757 1773 1841 4640 1279 1301 1318 1334 1353 1374 1387 1410 1429 1449 1482 1546 1587 1597 1604 1614 1624 1668 4642 1817 1860 1895 1927 1965 2006 2033 2078 2118 2157 2222 2352 2433 2453 2467 2487 2507 2595 4644 1948 1994 2030 2064 2104 2148 2176 2224 2265 2307 2376 2512 2598 2619 2634 2487 2676 2769 TB133 TB133 fire code treatment is available on select Alliance Program upholstery. Reference Guide at www.kimball.com. How to Specify For each upholstery grade step in the model specification, combine the Alliance partner designator and fabric grade as follows: ARC[grade] = Arc Com CAR[grade] = Carnegie CFS[grade] = CF Stinson LDI[grade] = EnviroLeather KNL[grade] = KnollTextiles MHM[grade] = Maharam MAF[grade] = Mayer Fabrics MOM[grade] = Momentum ULT[grade] = Ultrafabrics See the corresponding Kimball upholstery pricing page for complete How to Specify steps. IMPORTANT: Orders cannot be cancelled for chairs specified with Alliance Program upholstery. Page 13.5
Wood Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: Characteristics of wood Special wood finishes Customer-specified laminate (CSL) Customer-specified paint (CSP) Fabric application and colorways Customer s own material (COM) overview Alliance program TB133 process Wood Price Group 1 MC Amber Cherry CC Cordoba Cherry MH Mocha Cherry SC Sedona Cherry IM TM ES MW TW UW Brighton Maple Huntington Maple Espresso Walnut Midtown Walnut Tribeca Walnut Urban Walnut 1 CX Coco and SX Sienna price group 1 finishes on wood seating coordinate with the price group 2 sapele finishes with the same name, but are not a direct match. CX Coco 1 SX Sienna 1 CO DF YO NW Canyon Straight Grain Driftwood Straight Grain Monterey Straight Grain Tuscan Straight Grain Page 13.6
Upholstery Surface Materials Reference Guide at www.kimball.com for a complete overview of the Kimball materials program, including: Characteristics of wood Special wood finishes Customer-specified laminate (CSL) Customer-specified paint (CSP) Fabric application and colorways Customer s own material (COM) process overview Alliance program TB133 process Upholstery Applies to: seating Fabric Price Grades 1 7 See the Surface Materials Reference Guide at www.kimball.com for the most up-to-date list of available seating fabric patterns. Kimball Leather Price Grades L7 and L8 See the Surface Materials Reference Guide at www.kimball.com for the most up-to-date list of available seating leather. Alliance Fabric Price Grades A R See Surface Materials at www.kimball.com for a wide variety of graded-in fabrics from Arc-Com, Carnegie, CF Stinson, EnviroLeather, KnollTextiles, Maharam, Mayer Fabrics, Momentum, and Ultrafabrics. Kimball has analyzed each model to most accurately reflect the COM/COL yardage requirements shown at right. The yardage requirement for each model is based on 54"W fabric and cutting the fabric up the roll. For widths other than 54", increase the yardage requirement by the factors below: Fabric width Increase yardage 50" 53" 15% 48" 49" 30% 45" 47" 45% COM/COL Yardage Requirements COM COL Non- 1 4" 5 11" 12 18" Square Model Dir. Repeat Repeat Repeat Feet 4600 1.1 1.4 2.0 2.9 21.5 4605 1.4 1.7 2.6 2.9 24.0 4610 1.1 1.5 2.0 2.9 22.0 4620 1.4 1.7 2.6 2.9 27.0 4630 1.1 1.4 2.0 2.9 21.5 4635 1.4 1.7 2.6 2.9 24.0 4640 0.9 1.0 1.1 1.1 8.0 4642 1.8 1.9 2.2 2.9 35.0 4644 1.9 2.1 2.2 2.9 35.0 When ordering 10 or more chairs in the same COM, yardage requirements may be reduced. Contact Customer Service. Page 13.7
Notes Page 13.8