Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Aluminum optical chamber housing Anodized aluminum flush trim Polymer recycled PVC blockout housing Available in, 2, 3 or 4 sections Die cast aluminum end caps Stainless steel hardware Tempered glass lens Asymmetric wallwash, 0 x 0, 0 x 60, 30 x 60 or 60 x 60 optics 0, 2.5, 5 or 20 factory-set optical aiming options (not available for asymmetric wallwash) IP68 rated for up to (30cm), not suitable for permanent immersion applications IK0 rated 000kg max load, walk over only* Performance : Lumen maintenance 80,000 hrs [L70 @ 25 C] Lumen maintenance 60,000 hrs [L70 @ 50 C] Lumen measurements comply with LM - 79-08 standard Resolution per foot or per fixture Operating temperatures: -40 C to 50 C [-40F to 22F] Electrical : Line voltage luminaire for 00 to 277V Power and data in cable (#6-5) IP68 push-lock connectors 5W/ft version meets ASHRAE standards for linear lighting on building facades 8.5W/ft Regular Output version 5.25W/ft High Output version Dimming options: 0-0V, DALI, DMX, Lumentalk or Lutron EcoSystem enabled 4ft HO 4000K 0 degree tilt setting 0ºx0º 0ºx60º 30ºx60º 60ºx60º CERTIFICADO No.05884, 05885 RETILAP Delivered Output [lm] IK0 Intensity [peak cd] 3,932 6,37 3,668 0,38 4,035 5,37 3,845 3,062 Width of glass lens 5 2 [58mm] 3, 25 6 ", 37, 49 [33mm, 636mm, 94mm, 245mm] 7 4 [3mm] FRONT VIEW *All dimensions are preliminary SIDE VIEW 9 5 [4mm] 8 2 " [25mm] SECTION DETAIL Optical chamber Power supply housing *To meet 000kg walk over resistance requirements, cement must support 00% of the exterior surfaces of the blockout. /7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
OPTICAL CHAMBER ORIENTATION Key holes toward the wall side (or target to light). Frosted section of lens toward the wall side. Wall side 0 Street side Lumenpulse logo always readable from the street side. 2/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
ACCESSORIES Order separately, refer to each item s specification sheet for ordering information Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 52 controller keypad. Lumencue is a USB / mini SD DMX 52 controller. LumenID is a diagnostic and addressing DMX 52 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 52 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Cables (required): LOILC LOIJC Leader Cable for Lumenfacade Inground;0, 25 or 50 [3m, 7.6m or 5.2m] standard lengths Jumper Cable for Lumenfacade Inground; 2, 4 or 0 [0.6m,.2m or 3m] standard lengths Inground Junction Box (optional): Lumenfacade Inground IP68 sealed junction box starter kit - LOI-JBOX order code. *Use for stand alone fixtures and/or first of run fixtures 3/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
TYPICAL WIRING DIAGRAMS Typical Installation with Leader Cable American Color Code CE Color Code USE Green Yellow/Green Ground Black Brown Live White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - Optical chamber Leader cable to next fixture (For daisy-chain installation) Blockout Conduit (By others) Typical Installation with IP68 LOI-JBOX Accessory Cannot be used with ft LOI fixture LOI-JBOX Optical chamber Power & data input cable (By others) to next fixture (For daisy-chain installation) Blockout Conduit (By others) 4/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
TYPICAL WIRING DIAGRAMS - continued Non-Dimming or Lumentalk Dimming Version % minimum dimming value with Lumentalk dimming distance between two fixtures Ex: 0.5 ft [0.5m] IP68 LOI-JBOX SECTION VIEW Cap available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Therefore 0 [3m] Dimming Version (0-0V, DALI, EcoSystem *) 0% minimum dimming value for 0-0V, % minimum dimming value for DALI, EcoSystem distance between two fixtures Ex: 0.5 ft [0.5m] IP68 LOI-JBOX SECTION VIEW Data from controller (Cable by others) available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Therefore 0 [3m] *Each Lutron EcoSystem enabled fixture has its own address; for the example shown above, there are a total of 2 EcoSystem addresses. 5/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX Dimming) % minimum dimming value CBX-ST available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Data input Lumentouch 2.0 distance between two fixtures Ex: 0.5 ft [0.5m] Therefore 0 [3m] 00-240V Combined power & data input (From CBX, cable by others) Cap Daisy Chain Layout (DMX Dimming) % minimum dimming value Data output to next CBX CBX-DS CBX-DS available: 2, 4 or 0 [0.6m,.2m or 3m] Ex: L + D = 4.5ft [.4m] Data input Lumentouch 2.0 distance between two fixtures Ex: 0.5 ft [0.5m] Therefore 0 [3m] 00-240V Combined power & data input (From CBX, cable by others) Cap 6/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.
HOW TO ORDER LOI 00/277 2 3 4 5 6 7 8 9 6 2 Housing: LOI ASHRAE - Lumenfacade Inground, 5W/ft ASHRAE compliant LOI RO - Lumenfacade Inground, Regular Output, 8.5W/ft LOI HO - Lumenfacade Inground, High Output, 5.25W/ft A Lumenfacade Inground fixture includes x optical chamber (LOIC), x power and control box () and x recessed blockout (RBO). The LOIC, and RBO are provided according to the output/color, length and control configuration. Voltage: 00/277-00-277 volts 7 8 Tilt Setting: Note: not for asymmetric wallwash TS0-0 degrees TS2.5-2.5 degrees TS5-5 degrees TS20-20 degrees Factory set. Cannot be adjusted in the field. Optical Option: INTL - Internal Louver Control: 3 4 Length: 2-3 /6 inches (33mm) 24-25 /6 inches (636mm) 36-37 /6 inches (94mm) 48-49 /6 inches (245mm) Colors and Color temperatures: 27K - 2700K 30K - 3000K 35K - 3500K 40K - 4000K RD - Red (8-0 weeks lead time) GR - Green (8-0 weeks lead time) BL - Blue (8-0 weeks lead time) 9 NO - No Dimming LT - Lumentalk Dimming DIM - 0-0V Dimming 2 DMX FT - DMX Dimming, resolution per foot DMX FX - DMX Dimming, resolution per fixture DALI - DALI Dimming ES - Lutron EcoSystem Enabled Dimming 3 Option: ASL - Anti-slip lens 5 Optics: WW - Asymmetric Wallwash optic 0x0-0 x 0 * 0x60-0 x 60 30x60-30 x 60 60x60-60 x 60 *For best results, use with HO fixtures. Contact factory for application support. Notes: % minimum dimming value. 2 0% minimum dimming value. 3 One EcoSystem address per fixture length. % minimum dimming value. 7/7 Copyright Lumenpulse 205.877.937.3003 5-year limited warranty.